From 9bee94e7b7dac0bb049c488b8eaa9a48854ddb8f Mon Sep 17 00:00:00 2001 From: Gabriel Fernandez Date: Thu, 8 Mar 2018 17:53:55 +0100 Subject: clk: stm32mp1: Introduce STM32MP1 clock driver This patch introduces the mechanism to probe stm32mp1 driver. It also defines registers definition. This patch also introduces the generic mechanism to register a clock (a simple gate, divider and fixed factor). All clocks will be defined in one table. Signed-off-by: Gabriel Fernandez Signed-off-by: Michael Turquette --- drivers/clk/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 98ce9fc6e6c0..cbb9b0c05442 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -238,6 +238,12 @@ config COMMON_CLK_VC5 This driver supports the IDT VersaClock 5 and VersaClock 6 programmable clock generators. +config COMMON_CLK_STM32MP157 + def_bool COMMON_CLK && MACH_STM32MP157 + help + ---help--- + Support for stm32mp157 SoC family clocks + source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/imgtec/Kconfig" -- cgit v1.2.3 From da32d3539fca54f36f6069fafe6ee0e4bc7117d0 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 12 Mar 2018 10:32:48 +0100 Subject: clk: stm32: add configuration flags for each of the stm32 drivers Add two configuration flags to be able to not compile all the time stm32f and stm32h7 drivers when ARCH_STM32 is set. That help to save some space on those small platforms. Signed-off-by: Benjamin Gaignard Acked-by: Gabriel Fernandez Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 14 ++++++++++++++ drivers/clk/Makefile | 4 ++-- 2 files changed, 16 insertions(+), 2 deletions(-) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index cbb9b0c05442..a26cde051158 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -244,6 +244,20 @@ config COMMON_CLK_STM32MP157 ---help--- Support for stm32mp157 SoC family clocks +config COMMON_CLK_STM32F + bool "Clock driver for stm32f4 and stm32f7 SoC families" + depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746 + help + ---help--- + Support for stm32f4 and stm32f7 SoC families clocks + +config COMMON_CLK_STM32H7 + bool "Clock driver for stm32h7 SoC family" + depends on MACH_STM32H743 + help + ---help--- + Support for stm32h7 SoC family clocks + source "drivers/clk/bcm/Kconfig" source "drivers/clk/hisilicon/Kconfig" source "drivers/clk/imgtec/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 8d812c701aa6..e0c106ed9407 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -45,8 +45,8 @@ obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o -obj-$(CONFIG_ARCH_STM32) += clk-stm32f4.o -obj-$(CONFIG_ARCH_STM32) += clk-stm32h7.o +obj-$(CONFIG_COMMON_CLK_STM32F) += clk-stm32f4.o +obj-$(CONFIG_COMMON_CLK_STM32H7) += clk-stm32h7.o obj-$(CONFIG_COMMON_CLK_STM32MP157) += clk-stm32mp1.o obj-$(CONFIG_ARCH_TANGO) += clk-tango4.o obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o -- cgit v1.2.3 From 3a49afb84ca074ea4cc537e80d50ee8e5484e7cd Mon Sep 17 00:00:00 2001 From: Riku Voipio Date: Mon, 12 Mar 2018 12:49:45 +0200 Subject: clk: enable hi655x common clk automatically Without COMMON_CLK_HI655X Wifi and bluetooth are non-functional on Hikey. As suggested by Arnd, enable the driver automatically when the parent driver is selected. With sensible defaults in place, we can leave other choices for EXPERT. Cc: John Stultz Cc: Wei Xu Cc: Daniel Lezcano Suggested-by: Arnd Bergmann Signed-off-by: Riku Voipio Reviewed-by: Ulf Hansson Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 98ce9fc6e6c0..448ce83b334d 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -55,8 +55,10 @@ config COMMON_CLK_RK808 by control register. config COMMON_CLK_HI655X - tristate "Clock driver for Hi655x" - depends on MFD_HI655X_PMIC || COMPILE_TEST + tristate "Clock driver for Hi655x" if EXPERT + depends on (MFD_HI655X_PMIC || COMPILE_TEST) + depends on REGMAP + default MFD_HI655X_PMIC ---help--- This driver supports the hi655x PMIC clock. This multi-function device has one fixed-rate oscillator, clocked -- cgit v1.2.3 From 953cc3e8117013bd39a3b94e28361ce94ad63075 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Tue, 20 Mar 2018 09:15:41 +0100 Subject: clk: Add driver for the si544 clock generator chip This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd --- .../devicetree/bindings/clock/silabs,si544.txt | 25 ++ drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-si544.c | 411 +++++++++++++++++++++ 4 files changed, 446 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/silabs,si544.txt create mode 100644 drivers/clk/clk-si544.c (limited to 'drivers/clk/Kconfig') diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt new file mode 100644 index 000000000000..b86535b80920 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si544.txt @@ -0,0 +1,25 @@ +Binding for Silicon Labs 544 programmable I2C clock generator. + +Reference +This binding uses the common clock binding[1]. Details about the device can be +found in the datasheet[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si544 datasheet + https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf + +Required properties: + - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according + to the speed grade of the chip. + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si544". + +Example: + si544: clock-controller@55 { + reg = <0x55>; + #clock-cells = <0>; + compatible = "silabs,si544b"; + }; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 98ce9fc6e6c0..580fc04a96c4 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -91,6 +91,15 @@ config COMMON_CLK_SI514 This driver supports the Silicon Labs 514 programmable clock generator. +config COMMON_CLK_SI544 + tristate "Clock driver for SiLabs 544 devices" + depends on I2C + select REGMAP_I2C + help + ---help--- + This driver supports the Silicon Labs 544 programmable clock + generator. + config COMMON_CLK_SI570 tristate "Clock driver for SiLabs 570 and compatible devices" depends on I2C diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71ec41e6364f..bde614ab82e0 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o +obj-$(CONFIG_COMMON_CLK_SI544) += clk-si544.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o obj-$(CONFIG_ARCH_STM32) += clk-stm32f4.o obj-$(CONFIG_ARCH_STM32) += clk-stm32h7.o diff --git a/drivers/clk/clk-si544.c b/drivers/clk/clk-si544.c new file mode 100644 index 000000000000..1c96a9f6c022 --- /dev/null +++ b/drivers/clk/clk-si544.c @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Silicon Labs Si544 Programmable Oscillator + * Copyright (C) 2018 Topic Embedded Products + * Author: Mike Looijmans + */ + +#include +#include +#include +#include +#include +#include + +/* I2C registers (decimal as in datasheet) */ +#define SI544_REG_CONTROL 7 +#define SI544_REG_OE_STATE 17 +#define SI544_REG_HS_DIV 23 +#define SI544_REG_LS_HS_DIV 24 +#define SI544_REG_FBDIV0 26 +#define SI544_REG_FBDIV8 27 +#define SI544_REG_FBDIV16 28 +#define SI544_REG_FBDIV24 29 +#define SI544_REG_FBDIV32 30 +#define SI544_REG_FBDIV40 31 +#define SI544_REG_FCAL_OVR 69 +#define SI544_REG_ADPLL_DELTA_M0 231 +#define SI544_REG_ADPLL_DELTA_M8 232 +#define SI544_REG_ADPLL_DELTA_M16 233 +#define SI544_REG_PAGE_SELECT 255 + +/* Register values */ +#define SI544_CONTROL_RESET BIT(7) +#define SI544_CONTROL_MS_ICAL2 BIT(3) + +#define SI544_OE_STATE_ODC_OE BIT(0) + +/* Max freq depends on speed grade */ +#define SI544_MIN_FREQ 200000U + +/* Si544 Internal oscilator runs at 55.05 MHz */ +#define FXO 55050000U + +/* VCO range is 10.8 .. 12.1 GHz, max depends on speed grade */ +#define FVCO_MIN 10800000000ULL + +#define HS_DIV_MAX 2046 +#define HS_DIV_MAX_ODD 33 + +/* Lowest frequency synthesizeable using only the HS divider */ +#define MIN_HSDIV_FREQ (FVCO_MIN / HS_DIV_MAX) + +enum si544_speed_grade { + si544a, + si544b, + si544c, +}; + +struct clk_si544 { + struct clk_hw hw; + struct regmap *regmap; + struct i2c_client *i2c_client; + enum si544_speed_grade speed_grade; +}; +#define to_clk_si544(_hw) container_of(_hw, struct clk_si544, hw) + +/** + * struct clk_si544_muldiv - Multiplier/divider settings + * @fb_div_frac: integer part of feedback divider (32 bits) + * @fb_div_int: fractional part of feedback divider (11 bits) + * @hs_div: 1st divider, 5..2046, must be even when >33 + * @ls_div_bits: 2nd divider, as 2^x, range 0..5 + * If ls_div_bits is non-zero, hs_div must be even + */ +struct clk_si544_muldiv { + u32 fb_div_frac; + u16 fb_div_int; + u16 hs_div; + u8 ls_div_bits; +}; + +/* Enables or disables the output driver */ +static int si544_enable_output(struct clk_si544 *data, bool enable) +{ + return regmap_update_bits(data->regmap, SI544_REG_OE_STATE, + SI544_OE_STATE_ODC_OE, enable ? SI544_OE_STATE_ODC_OE : 0); +} + +/* Retrieve clock multiplier and dividers from hardware */ +static int si544_get_muldiv(struct clk_si544 *data, + struct clk_si544_muldiv *settings) +{ + int err; + u8 reg[6]; + + err = regmap_bulk_read(data->regmap, SI544_REG_HS_DIV, reg, 2); + if (err) + return err; + + settings->ls_div_bits = (reg[1] >> 4) & 0x07; + settings->hs_div = (reg[1] & 0x07) << 8 | reg[0]; + + err = regmap_bulk_read(data->regmap, SI544_REG_FBDIV0, reg, 6); + if (err) + return err; + + settings->fb_div_int = reg[4] | (reg[5] & 0x07) << 8; + settings->fb_div_frac = reg[0] | reg[1] << 8 | reg[2] << 16 | + reg[3] << 24; + return 0; +} + +static int si544_set_muldiv(struct clk_si544 *data, + struct clk_si544_muldiv *settings) +{ + int err; + u8 reg[6]; + + reg[0] = settings->hs_div; + reg[1] = settings->hs_div >> 8 | settings->ls_div_bits << 4; + + err = regmap_bulk_write(data->regmap, SI544_REG_HS_DIV, reg, 2); + if (err < 0) + return err; + + reg[0] = settings->fb_div_frac; + reg[1] = settings->fb_div_frac >> 8; + reg[2] = settings->fb_div_frac >> 16; + reg[3] = settings->fb_div_frac >> 24; + reg[4] = settings->fb_div_int; + reg[5] = settings->fb_div_int >> 8; + + /* + * Writing to SI544_REG_FBDIV40 triggers the clock change, so that + * must be written last + */ + return regmap_bulk_write(data->regmap, SI544_REG_FBDIV0, reg, 6); +} + +static bool is_valid_frequency(const struct clk_si544 *data, + unsigned long frequency) +{ + unsigned long max_freq = 0; + + if (frequency < SI544_MIN_FREQ) + return false; + + switch (data->speed_grade) { + case si544a: + max_freq = 1500000000; + break; + case si544b: + max_freq = 800000000; + break; + case si544c: + max_freq = 350000000; + break; + } + + return frequency <= max_freq; +} + +/* Calculate divider settings for a given frequency */ +static int si544_calc_muldiv(struct clk_si544_muldiv *settings, + unsigned long frequency) +{ + u64 vco; + u32 ls_freq; + u32 tmp; + u8 res; + + /* Determine the minimum value of LS_DIV and resulting target freq. */ + ls_freq = frequency; + settings->ls_div_bits = 0; + + if (frequency >= MIN_HSDIV_FREQ) { + settings->ls_div_bits = 0; + } else { + res = 1; + tmp = 2 * HS_DIV_MAX; + while (tmp <= (HS_DIV_MAX * 32)) { + if (((u64)frequency * tmp) >= FVCO_MIN) + break; + ++res; + tmp <<= 1; + } + settings->ls_div_bits = res; + ls_freq = frequency << res; + } + + /* Determine minimum HS_DIV by rounding up */ + vco = FVCO_MIN + ls_freq - 1; + do_div(vco, ls_freq); + settings->hs_div = vco; + + /* round up to even number when required */ + if ((settings->hs_div & 1) && + (settings->hs_div > HS_DIV_MAX_ODD || settings->ls_div_bits)) + ++settings->hs_div; + + /* Calculate VCO frequency (in 10..12GHz range) */ + vco = (u64)ls_freq * settings->hs_div; + + /* Calculate the integer part of the feedback divider */ + tmp = do_div(vco, FXO); + settings->fb_div_int = vco; + + /* And the fractional bits using the remainder */ + vco = (u64)tmp << 32; + do_div(vco, FXO); + settings->fb_div_frac = vco; + + return 0; +} + +/* Calculate resulting frequency given the register settings */ +static unsigned long si544_calc_rate(struct clk_si544_muldiv *settings) +{ + u32 d = settings->hs_div * BIT(settings->ls_div_bits); + u64 vco; + + /* Calculate VCO from the fractional part */ + vco = (u64)settings->fb_div_frac * FXO; + vco += (FXO / 2); + vco >>= 32; + + /* Add the integer part of the VCO frequency */ + vco += (u64)settings->fb_div_int * FXO; + + /* Apply divider to obtain the generated frequency */ + do_div(vco, d); + + return vco; +} + +static unsigned long si544_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + struct clk_si544_muldiv settings; + int err; + + err = si544_get_muldiv(data, &settings); + if (err) + return 0; + + return si544_calc_rate(&settings); +} + +static long si544_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + struct clk_si544_muldiv settings; + int err; + + if (!is_valid_frequency(data, rate)) + return -EINVAL; + + err = si544_calc_muldiv(&settings, rate); + if (err) + return err; + + return si544_calc_rate(&settings); +} + +/* + * Update output frequency for "big" frequency changes + */ +static int si544_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + struct clk_si544_muldiv settings; + int err; + + if (!is_valid_frequency(data, rate)) + return -EINVAL; + + err = si544_calc_muldiv(&settings, rate); + if (err) + return err; + + si544_enable_output(data, false); + + /* Allow FCAL for this frequency update */ + err = regmap_write(data->regmap, SI544_REG_FCAL_OVR, 0); + if (err < 0) + return err; + + + err = si544_set_muldiv(data, &settings); + if (err < 0) + return err; /* Undefined state now, best to leave disabled */ + + /* Trigger calibration */ + err = regmap_write(data->regmap, SI544_REG_CONTROL, + SI544_CONTROL_MS_ICAL2); + if (err < 0) + return err; + + /* Applying a new frequency can take up to 10ms */ + usleep_range(10000, 12000); + + si544_enable_output(data, true); + + return err; +} + +static const struct clk_ops si544_clk_ops = { + .recalc_rate = si544_recalc_rate, + .round_rate = si544_round_rate, + .set_rate = si544_set_rate, +}; + +static bool si544_regmap_is_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SI544_REG_CONTROL: + case SI544_REG_FCAL_OVR: + return true; + default: + return false; + } +} + +static const struct regmap_config si544_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = SI544_REG_PAGE_SELECT, + .volatile_reg = si544_regmap_is_volatile, +}; + +static int si544_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct clk_si544 *data; + struct clk_init_data init; + int err; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + init.ops = &si544_clk_ops; + init.flags = 0; + init.num_parents = 0; + data->hw.init = &init; + data->i2c_client = client; + data->speed_grade = id->driver_data; + + if (of_property_read_string(client->dev.of_node, "clock-output-names", + &init.name)) + init.name = client->dev.of_node->name; + + data->regmap = devm_regmap_init_i2c(client, &si544_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + + i2c_set_clientdata(client, data); + + /* Select page 0, just to be sure, there appear to be no more */ + err = regmap_write(data->regmap, SI544_REG_PAGE_SELECT, 0); + if (err < 0) + return err; + + err = devm_clk_hw_register(&client->dev, &data->hw); + if (err) { + dev_err(&client->dev, "clock registration failed\n"); + return err; + } + err = devm_of_clk_add_hw_provider(&client->dev, of_clk_hw_simple_get, + &data->hw); + if (err) { + dev_err(&client->dev, "unable to add clk provider\n"); + return err; + } + + return 0; +} + +static const struct i2c_device_id si544_id[] = { + { "si544a", si544a }, + { "si544b", si544b }, + { "si544c", si544c }, + { } +}; +MODULE_DEVICE_TABLE(i2c, si544_id); + +static const struct of_device_id clk_si544_of_match[] = { + { .compatible = "silabs,si544a" }, + { .compatible = "silabs,si544b" }, + { .compatible = "silabs,si544c" }, + { }, +}; +MODULE_DEVICE_TABLE(of, clk_si544_of_match); + +static struct i2c_driver si544_driver = { + .driver = { + .name = "si544", + .of_match_table = clk_si544_of_match, + }, + .probe = si544_probe, + .id_table = si544_id, +}; +module_i2c_driver(si544_driver); + +MODULE_AUTHOR("Mike Looijmans "); +MODULE_DESCRIPTION("Si544 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3