From dbe9a2edd17d843d80faf2b99f20a691c1853418 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 29 May 2012 21:21:07 +0200 Subject: ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification The comparison between the system sleep state being entered and the lowest system sleep state the given device may wake up from in acpi_pm_device_sleep_state() is reversed, because the specification (ACPI 5.0) says that for wakeup to work: "The sleeping state being entered must be less than or equal to the power state declared in element 1 of the _PRW object." In other words, the state returned by _PRW is the deepest (lowest-power) system sleep state the device is capable of waking up the system from. Moreover, acpi_pm_device_sleep_state() also should check if the wakeup capability is supported through ACPI, because in principle it may be done via native PCIe PME, for example, in which case _SxW should not be evaluated. Signed-off-by: Rafael J. Wysocki --- drivers/acpi/sleep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/acpi/sleep.c') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a564fc3ffa1c..d8b381e94ee2 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -773,8 +773,8 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) * can wake the system. _S0W may be valid, too. */ if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && - adev->wakeup.sleep_state <= acpi_target_sleep_state)) { + (device_may_wakeup(dev) && adev->wakeup.flags.valid && + adev->wakeup.sleep_state >= acpi_target_sleep_state)) { acpi_status status; acpi_method[3] = 'W'; -- cgit v1.2.3