From 9d4436a6fbc8c5eccdfcb8f5884e0a7b4a57f6d2 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Sun, 5 Nov 2006 15:40:13 +0900 Subject: sh: Add support for SH7206 and SH7619 CPU subtypes. This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 43 +++++- arch/sh/Makefile | 3 + arch/sh/boot/compressed/misc.c | 3 +- arch/sh/kernel/Makefile | 2 +- arch/sh/kernel/cpu/Makefile | 11 +- arch/sh/kernel/cpu/init.c | 2 + arch/sh/kernel/cpu/irq/imask.c | 5 +- arch/sh/kernel/cpu/irq/ipr.c | 16 ++ arch/sh/kernel/cpu/sh2/Makefile | 3 +- arch/sh/kernel/cpu/sh2/clock-sh7619.c | 81 ++++++++++ arch/sh/kernel/cpu/sh2/probe.c | 16 +- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 53 +++++++ arch/sh/kernel/cpu/sh2a/Makefile | 10 ++ arch/sh/kernel/cpu/sh2a/clock-sh7206.c | 85 +++++++++++ arch/sh/kernel/cpu/sh2a/probe.c | 39 +++++ arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 58 ++++++++ arch/sh/kernel/setup.c | 1 + arch/sh/kernel/signal.c | 10 +- arch/sh/kernel/timers/Makefile | 2 + arch/sh/kernel/timers/timer-cmt.c | 256 ++++++++++++++++++++++++++++++++ arch/sh/kernel/timers/timer-mtu2.c | 260 +++++++++++++++++++++++++++++++++ arch/sh/kernel/timers/timer.c | 6 + arch/sh/mm/Kconfig | 17 ++- arch/sh/mm/cache-sh2.c | 69 +++++---- arch/sh/tools/mach-types | 2 + 25 files changed, 1000 insertions(+), 53 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh2/clock-sh7619.c create mode 100644 arch/sh/kernel/cpu/sh2/setup-sh7619.c create mode 100644 arch/sh/kernel/cpu/sh2a/Makefile create mode 100644 arch/sh/kernel/cpu/sh2a/clock-sh7206.c create mode 100644 arch/sh/kernel/cpu/sh2a/probe.c create mode 100644 arch/sh/kernel/cpu/sh2a/setup-sh7206.c create mode 100644 arch/sh/kernel/timers/timer-cmt.c create mode 100644 arch/sh/kernel/timers/timer-mtu2.c (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index bffc7e176970..ba7a15016307 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -219,6 +219,20 @@ config SH_SHMIN help Select SHMIN if configuring for the SHMIN board. +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + config SH_UNKNOWN bool "BareCPU" help @@ -364,10 +378,25 @@ depends on !GENERIC_TIME config SH_TMU bool "TMU timer support" + depends on CPU_SH3 || CPU_SH4 default y help This enables the use of the TMU as the system timer. +config SH_CMT + bool "CMT timer support" + depends on CPU_SH2 + default y + help + This enables the use of the CMT as the system timer. + +config SH_MTU2 + bool "MTU2 timer support" + depends on CPU_SH2A + default n + help + This enables the use of the MTU2 as the system timer. + endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" @@ -378,17 +407,25 @@ source "arch/sh/boards/renesas/r7780rp/Kconfig" config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" + default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 + default "31250000" if CPU_SUBTYPE_SH7619 + default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ + CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ + CPU_SUBTYPE_SH7206 default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 default "60000000" if CPU_SUBTYPE_SH7751 - default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ - CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 - default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "66000000" if CPU_SUBTYPE_SH4_202 help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on platforms lacking an RTC. +config SH_CLK_MD + int "CPU Mode Pin Setting" + depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + help + MD2 - MD0 Setting. + menu "CPU Frequency scaling" source "drivers/cpufreq/Kconfig" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 26d62ff51a64..dc43984bd4be 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -109,6 +109,8 @@ machdir-$(CONFIG_SH_SH4202_MICRODEV) := superh/microdev machdir-$(CONFIG_SH_LANDISK) := landisk machdir-$(CONFIG_SH_TITAN) := titan machdir-$(CONFIG_SH_SHMIN) := shmin +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619 machdir-$(CONFIG_SH_UNKNOWN) := unknown incdir-y := $(notdir $(machdir-y)) @@ -124,6 +126,7 @@ core-$(CONFIG_HD64465) += arch/sh/cchips/hd6446x/hd64465/ core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index f2fed5ce5cc3..35452d85b7f7 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -12,6 +12,7 @@ */ #include +#include #ifdef CONFIG_SH_STANDARD_BIOS #include #endif @@ -228,7 +229,7 @@ long* stack_start = &user_stack[STACK_SIZE]; void decompress_kernel(void) { output_data = 0; - output_ptr = (unsigned long)&_text+0x20001000; + output_ptr = P2SEGADDR((unsigned long)&_text+0x1000); free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 5da88a43d350..50d54c24d76a 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -4,7 +4,7 @@ extra-y := head.o init_task.o vmlinux.lds -obj-y := process.o signal.o entry.o traps.o irq.o \ +obj-y := process.o signal.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ io.o io_generic.o sh_ksyms.o syscalls.o diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index fb5dac069382..0582e6712b79 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -2,11 +2,12 @@ # Makefile for the Linux/SuperH CPU-specifc backends. # -obj-y += irq/ init.o clock.o - -obj-$(CONFIG_CPU_SH2) += sh2/ -obj-$(CONFIG_CPU_SH3) += sh3/ -obj-$(CONFIG_CPU_SH4) += sh4/ +obj-$(CONFIG_CPU_SH2) = sh2/ +obj-$(CONFIG_CPU_SH2A) = sh2a/ +obj-$(CONFIG_CPU_SH3) = sh3/ +obj-$(CONFIG_CPU_SH4) = sh4/ obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o + +obj-y += irq/ init.o clock.o diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index bfb90eb0b7a6..48121766e8d2 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -68,12 +68,14 @@ static void __init cache_init(void) waysize = cpu_data->dcache.sets; +#ifdef CCR_CACHE_ORA /* * If the OC is already in RAM mode, we only have * half of the entries to flush.. */ if (ccr & CCR_CACHE_ORA) waysize >>= 1; +#endif waysize <<= cpu_data->dcache.entry_shift; diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index a33ae3e0a5a5..301b505c4278 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -53,7 +53,10 @@ void static inline set_interrupt_registers(int ip) { unsigned long __dummy; - asm volatile("ldc %2, r6_bank\n\t" + asm volatile( +#ifdef CONFIG_CPU_HAS_SR_RB + "ldc %2, r6_bank\n\t" +#endif "stc sr, %0\n\t" "and #0xf0, %0\n\t" "shlr2 %0\n\t" diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index a0089563cbfc..f7a2bae1df94 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -62,6 +62,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) } EXPORT_SYMBOL(make_ipr_irq); +/* + * XXX: Move this garbage in to the drivers, and kill off the ridiculous CPU + * subtype checks. + */ static struct ipr_data sys_ipr_map[] = { #ifndef CONFIG_CPU_SUBTYPE_SH7780 { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY }, @@ -80,6 +84,18 @@ static struct ipr_data sys_ipr_map[] = { { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, #endif +#ifdef SCIF2_ERI_IRQ + { SCIF2_ERI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, + { SCIF2_RXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, + { SCIF2_BRI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, + { SCIF2_TXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, +#endif +#ifdef SCIF3_ERI_IRQ + { SCIF3_ERI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, + { SCIF3_RXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, + { SCIF3_BRI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, + { SCIF3_TXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, diff --git a/arch/sh/kernel/cpu/sh2/Makefile b/arch/sh/kernel/cpu/sh2/Makefile index 389353fba608..f0f059acfcfb 100644 --- a/arch/sh/kernel/cpu/sh2/Makefile +++ b/arch/sh/kernel/cpu/sh2/Makefile @@ -2,5 +2,6 @@ # Makefile for the Linux/SuperH SH-2 backends. # -obj-y := probe.o +obj-y := ex.o probe.o entry.o +obj-$(CONFIG_CPU_SUBTYPE_SH7619) += setup-sh7619.o clock-sh7619.o diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c new file mode 100644 index 000000000000..d0440b269702 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c @@ -0,0 +1,81 @@ +/* + * arch/sh/kernel/cpu/sh2/clock-sh7619.c + * + * SH7619 support for the clock framework + * + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +const static int pll1rate[]={1,2}; +const static int pfc_divisors[]={1,2,0,4}; + +#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6) +#define PLL2 (2) +#else +#error "Illigal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 7]; +} + +static struct clk_ops sh7619_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7619_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7]; +} + +static struct clk_ops sh7619_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7619_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7619_clk_ops[] = { + &sh7619_master_clk_ops, + &sh7619_module_clk_ops, + &sh7619_bus_clk_ops, + &sh7619_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7619_clk_ops)) + *ops = sh7619_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index f17a2a0d588e..ba527d9b5024 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -17,17 +17,23 @@ int __init detect_cpu_and_cache_system(void) { - /* - * For now, assume SH7604 .. fix this later. - */ +#if defined(CONFIG_CPU_SUBTYPE_SH7604) cpu_data->type = CPU_SH7604; cpu_data->dcache.ways = 4; - cpu_data->dcache.way_shift = 6; + cpu_data->dcache.way_incr = (1<<10); cpu_data->dcache.sets = 64; cpu_data->dcache.entry_shift = 4; cpu_data->dcache.linesz = L1_CACHE_BYTES; cpu_data->dcache.flags = 0; - +#elif defined(CONFIG_CPU_SUBTYPE_SH7619) + cpu_data->type = CPU_SH7619; + cpu_data->dcache.ways = 4; + cpu_data->dcache.way_incr = (1<<12); + cpu_data->dcache.sets = 256; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; +#endif /* * SH-2 doesn't have separate caches */ diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c new file mode 100644 index 000000000000..82c2d905152f --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -0,0 +1,53 @@ +/* + * SH7619 Setup + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xf8400000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 88, 89, 91, 90}, + }, { + .mapbase = 0xf8410000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 92, 93, 95, 94}, + }, { + .mapbase = 0xf8420000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 96, 97, 99, 98}, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7619_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7619_devices_setup(void) +{ + return platform_add_devices(sh7619_devices, + ARRAY_SIZE(sh7619_devices)); +} +__initcall(sh7619_devices_setup); diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile new file mode 100644 index 000000000000..350972ae9410 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the Linux/SuperH SH-2A backends. +# + +obj-y := common.o probe.o + +common-y += $(addprefix ../sh2/, ex.o) +common-y += $(addprefix ../sh2/, entry.o) + +obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c new file mode 100644 index 000000000000..a9ad309c6a33 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c @@ -0,0 +1,85 @@ +/* + * arch/sh/kernel/cpu/sh2a/clock-sh7206.c + * + * SH7206 support for the clock framework + * + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +const static int pll1rate[]={1,2,3,4,6,8}; +const static int pfc_divisors[]={1,2,3,4,6,8,12}; +#define ifc_divisors pfc_divisors + +#if (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 6) +#define PLL2 (2) +#elif (CONFIG_SH_CLK_MD == 7) +#define PLL2 (1) +#else +#error "Illigal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007]; +} + +static struct clk_ops sh7206_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7206_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007]; +} + +static struct clk_ops sh7206_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7206_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7206_clk_ops[] = { + &sh7206_master_clk_ops, + &sh7206_module_clk_ops, + &sh7206_bus_clk_ops, + &sh7206_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7206_clk_ops)) + *ops = sh7206_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c new file mode 100644 index 000000000000..87c6c0542089 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -0,0 +1,39 @@ +/* + * arch/sh/kernel/cpu/sh2a/probe.c + * + * CPU Subtype Probing for SH-2A. + * + * Copyright (C) 2004, 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include + +int __init detect_cpu_and_cache_system(void) +{ + /* Just SH7206 for now .. */ + cpu_data->type = CPU_SH7206; + + cpu_data->dcache.ways = 4; + cpu_data->dcache.way_incr = (1 << 11); + cpu_data->dcache.sets = 128; + cpu_data->dcache.entry_shift = 4; + cpu_data->dcache.linesz = L1_CACHE_BYTES; + cpu_data->dcache.flags = 0; + + /* + * The icache is the same as the dcache as far as this setup is + * concerned. The only real difference in hardware is that the icache + * lacks the U bit that the dcache has, none of this has any bearing + * on the cache info. + */ + cpu_data->icache = cpu_data->dcache; + + return 0; +} + diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c new file mode 100644 index 000000000000..cdfeef49e62e --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -0,0 +1,58 @@ +/* + * SH7206 Setup + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 240, 241, 242, 243}, + }, { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 244, 245, 246, 247}, + }, { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 248, 249, 250, 251}, + }, { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 252, 253, 254, 255}, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7206_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7206_devices_setup(void) +{ + return platform_add_devices(sh7206_devices, + ARRAY_SIZE(sh7206_devices)); +} +__initcall(sh7206_devices_setup); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 36d86f9ac38a..c24f6390007b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -404,6 +404,7 @@ static const char *cpu_name[] = { [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", + [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH_NONE] = "Unknown" }; diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 5213f5bc6ce0..764886b4bcf1 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -98,7 +98,11 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, */ #define MOVW(n) (0x9300|((n)-2)) /* Move mem word at PC+n to R3 */ -#define TRAP16 0xc310 /* Syscall w/no args (NR in R3) */ +#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A) +#define TRAP_NOARG 0xc320 /* Syscall w/no args (NR in R3) */ +#else +#define TRAP_NOARG 0xc310 /* Syscall w/no args (NR in R3) */ +#endif #define OR_R0_R0 0x200b /* or r0,r0 (insert to avoid hardware bug) */ struct sigframe @@ -350,7 +354,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, } else { /* Generate return code (system call to sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); err |= __put_user(OR_R0_R0, &frame->retcode[2]); err |= __put_user(OR_R0_R0, &frame->retcode[3]); err |= __put_user(OR_R0_R0, &frame->retcode[4]); @@ -430,7 +434,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, } else { /* Generate return code (system call to rt_sigreturn) */ err |= __put_user(MOVW(7), &frame->retcode[0]); - err |= __put_user(TRAP16, &frame->retcode[1]); + err |= __put_user(TRAP_NOARG, &frame->retcode[1]); err |= __put_user(OR_R0_R0, &frame->retcode[2]); err |= __put_user(OR_R0_R0, &frame->retcode[3]); err |= __put_user(OR_R0_R0, &frame->retcode[4]); diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile index 151a6a304cec..bcf244ff6a12 100644 --- a/arch/sh/kernel/timers/Makefile +++ b/arch/sh/kernel/timers/Makefile @@ -5,4 +5,6 @@ obj-y := timer.o obj-$(CONFIG_SH_TMU) += timer-tmu.o +obj-$(CONFIG_SH_MTU2) += timer-mtu2.o +obj-$(CONFIG_SH_CMT) += timer-cmt.o diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c new file mode 100644 index 000000000000..9eab395cd341 --- /dev/null +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -0,0 +1,256 @@ +/* + * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support + * + * Copyright (C) 2005 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define CMT_CMSTR 0xf84a0070 +#define CMT_CMCSR_0 0xf84a0072 +#define CMT_CMCNT_0 0xf84a0074 +#define CMT_CMCOR_0 0xf84a0076 +#define CMT_CMCSR_1 0xf84a0078 +#define CMT_CMCNT_1 0xf84a007a +#define CMT_CMCOR_1 0xf84a007c + +#define STBCR3 0xf80a0000 +#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) +#define CMT_CMCSR_INIT 0x0040 +#define CMT_CMCSR_CALIB 0x0000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#define CMT_CMSTR 0xfffec000 +#define CMT_CMCSR_0 0xfffec002 +#define CMT_CMCNT_0 0xfffec004 +#define CMT_CMCOR_0 0xfffec006 + +#define STBCR4 0xfffe040c +#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0) +#define CMT_CMCSR_INIT 0x0040 +#define CMT_CMCSR_CALIB 0x0000 +#else +#error "Unknown CPU SUBTYPE" +#endif + +static DEFINE_SPINLOCK(cmt0_lock); + +static unsigned long cmt_timer_get_offset(void) +{ + int count; + unsigned long flags; + + static unsigned short count_p = 0xffff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + spin_lock_irqsave(&cmt0_lock, flags); + /* timer count may underflow right here */ + count = ctrl_inw(CMT_CMCOR_0); + count -= ctrl_inw(CMT_CMCNT_0); + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if (jiffies_t == jiffies_p) { + if (count > count_p) { + /* the nutcase */ + if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */ + count -= LATCH; + } else { + printk("%s (): hardware timer problem?\n", + __FUNCTION__); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + spin_unlock_irqrestore(&cmt0_lock, flags); + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long timer_status; + + /* Clear CMF bit */ + timer_status = ctrl_inw(CMT_CMCSR_0); + timer_status &= ~0x80; + ctrl_outw(timer_status, CMT_CMCSR_0); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + handle_timer_tick(regs); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction cmt_irq = { + .name = "timer", + .handler = cmt_timer_interrupt, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, +}; + +/* + * Hah! We'll see if this works (switching from usecs to nsecs). + */ +static unsigned long cmt_timer_get_frequency(void) +{ + u32 freq; + struct timespec ts1, ts2; + unsigned long diff_nsec; + unsigned long factor; + + /* Setup the timer: We don't want to generate interrupts, just + * have it count down at its natural rate. + */ + + ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); + ctrl_outw(CMT_CMCSR_CALIB, CMT_CMCSR_0); + ctrl_outw(0xffff, CMT_CMCOR_0); + ctrl_outw(0xffff, CMT_CMCNT_0); + + rtc_sh_get_time(&ts2); + + do { + rtc_sh_get_time(&ts1); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + /* actually start the timer */ + ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); + + do { + rtc_sh_get_time(&ts2); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + freq = 0xffff - ctrl_inw(CMT_CMCNT_0); + if (ts2.tv_nsec < ts1.tv_nsec) { + ts2.tv_nsec += 1000000000; + ts2.tv_sec--; + } + + diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); + + /* this should work well if the RTC has a precision of n Hz, where + * n is an integer. I don't think we have to worry about the other + * cases. */ + factor = (1000000000 + diff_nsec/2) / diff_nsec; + + if (factor * diff_nsec > 1100000000 || + factor * diff_nsec < 900000000) + panic("weird RTC (diff_nsec %ld)", diff_nsec); + + return freq * factor; +} + +static void cmt_clk_init(struct clk *clk) +{ + u8 divisor = CMT_CMCSR_INIT & 0x3; + ctrl_inw(CMT_CMCSR_0); + ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); + clk->parent = clk_get("module_clk"); + clk->rate = clk->parent->rate / (8 << (divisor << 1)); +} + +static void cmt_clk_recalc(struct clk *clk) +{ + u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3; + clk->rate = clk->parent->rate / (8 << (divisor << 1)); +} + +static struct clk_ops cmt_clk_ops = { + .init = cmt_clk_init, + .recalc = cmt_clk_recalc, +}; + +static struct clk cmt0_clk = { + .name = "cmt0_clk", + .ops = &cmt_clk_ops, +}; + +static int cmt_timer_start(void) +{ + ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); + return 0; +} + +static int cmt_timer_stop(void) +{ + ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); + return 0; +} + +static int cmt_timer_init(void) +{ + unsigned long interval; + + cmt_clock_enable(); + + setup_irq(TIMER_IRQ, &cmt_irq); + + cmt0_clk.parent = clk_get("module_clk"); + + cmt_timer_stop(); + + interval = cmt0_clk.parent->rate / 8 / HZ; + printk(KERN_INFO "Interval = %ld\n", interval); + + ctrl_outw(interval, CMT_CMCOR_0); + + clk_register(&cmt0_clk); + clk_enable(&cmt0_clk); + + cmt_timer_start(); + + return 0; +} + +struct sys_timer_ops cmt_timer_ops = { + .init = cmt_timer_init, + .start = cmt_timer_start, + .stop = cmt_timer_stop, + .get_frequency = cmt_timer_get_frequency, + .get_offset = cmt_timer_get_offset, +}; + +struct sys_timer cmt_timer = { + .name = "cmt", + .ops = &cmt_timer_ops, +}; + diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c new file mode 100644 index 000000000000..73a5ef3c457d --- /dev/null +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -0,0 +1,260 @@ +/* + * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support + * + * Copyright (C) 2005 Paul Mundt + * + * Based off of arch/sh/kernel/timers/timer-tmu.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * We use channel 1 for our lowly system timer. Channel 2 would be the other + * likely candidate, but we leave it alone as it has higher divisors that + * would be of more use to other more interesting applications. + * + * TODO: Presently we only implement a 16-bit single-channel system timer. + * However, we can implement channel cascade if we go the overflow route and + * get away with using 2 MTU2 channels as a 32-bit timer. + */ + +static DEFINE_SPINLOCK(mtu2_lock); + +#define MTU2_TSTR 0xfffe4280 +#define MTU2_TCR_1 0xfffe4380 +#define MTU2_TMDR_1 0xfffe4381 +#define MTU2_TIOR_1 0xfffe4382 +#define MTU2_TIER_1 0xfffe4384 +#define MTU2_TSR_1 0xfffe4385 +#define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */ +#define MTU2_TGRA_1 0xfffe438a + +#define STBCR3 0xfffe0408 + +#define MTU2_TSTR_CST1 (1 << 1) /* Counter Start 1 */ + +#define MTU2_TSR_TGFA (1 << 0) /* GRA compare match */ + +#define MTU2_TIER_TGIEA (1 << 0) /* GRA compare match interrupt enable */ + +#define MTU2_TCR_INIT 0x22 + +#define MTU2_TCR_CALIB 0x00 + +static unsigned long mtu2_timer_get_offset(void) +{ + int count; + unsigned long flags; + + static int count_p = 0x7fff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + spin_lock_irqsave(&mtu2_lock, flags); + /* timer count may underflow right here */ + count = ctrl_inw(MTU2_TCNT_1); /* read the latched count */ + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if (jiffies_t == jiffies_p) { + if (count > count_p) { + if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) { + count -= LATCH; + } else { + printk("%s (): hardware timer problem?\n", + __FUNCTION__); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + spin_unlock_irqrestore(&mtu2_lock, flags); + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long timer_status; + + /* Clear TGFA bit */ + timer_status = ctrl_inb(MTU2_TSR_1); + timer_status &= ~MTU2_TSR_TGFA; + ctrl_outb(timer_status, MTU2_TSR_1); + + /* Do timer tick */ + write_seqlock(&xtime_lock); + handle_timer_tick(regs); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction mtu2_irq = { + .name = "timer", + .handler = mtu2_timer_interrupt, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, +}; + +/* + * Hah! We'll see if this works (switching from usecs to nsecs). + */ +static unsigned long mtu2_timer_get_frequency(void) +{ + u32 freq; + struct timespec ts1, ts2; + unsigned long diff_nsec; + unsigned long factor; + + /* Setup the timer: We don't want to generate interrupts, just + * have it count down at its natural rate. + */ + + ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR); + ctrl_outb(MTU2_TCR_CALIB, MTU2_TCR_1); + ctrl_outb(ctrl_inb(MTU2_TIER_1) & ~MTU2_TIER_TGIEA, MTU2_TIER_1); + ctrl_outw(0, MTU2_TCNT_1); + + rtc_get_time(&ts2); + + do { + rtc_get_time(&ts1); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + /* actually start the timer */ + ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); + + do { + rtc_get_time(&ts2); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + freq = ctrl_inw(MTU2_TCNT_0); + if (ts2.tv_nsec < ts1.tv_nsec) { + ts2.tv_nsec += 1000000000; + ts2.tv_sec--; + } + + diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); + + /* this should work well if the RTC has a precision of n Hz, where + * n is an integer. I don't think we have to worry about the other + * cases. */ + factor = (1000000000 + diff_nsec/2) / diff_nsec; + + if (factor * diff_nsec > 1100000000 || + factor * diff_nsec < 900000000) + panic("weird RTC (diff_nsec %ld)", diff_nsec); + + return freq * factor; +} + +static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 }; + +static void mtu2_clk_init(struct clk *clk) +{ + u8 idx = MTU2_TCR_INIT & 0x7; + + clk->rate = clk->parent->rate / divisors[idx]; + /* Start TCNT counting */ + ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); + +} + +static void mtu2_clk_recalc(struct clk *clk) +{ + u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7; + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops mtu2_clk_ops = { + .init = mtu2_clk_init, + .recalc = mtu2_clk_recalc, +}; + +static struct clk mtu2_clk1 = { + .name = "mtu2_clk1", + .ops = &mtu2_clk_ops, +}; + +static int mtu2_timer_start(void) +{ + ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR); + return 0; +} + +static int mtu2_timer_stop(void) +{ + ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR); + return 0; +} + +static int mtu2_timer_init(void) +{ + u8 tmp; + unsigned long interval; + + setup_irq(TIMER_IRQ, &mtu2_irq); + + mtu2_clk1.parent = clk_get("module_clk"); + + ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3); + + /* Normal operation */ + ctrl_outb(0, MTU2_TMDR_1); + ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1); + ctrl_outb(0x01, MTU2_TIOR_1); + + /* Enable underflow interrupt */ + ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1); + + interval = CONFIG_SH_PCLK_FREQ / 16 / HZ; + printk(KERN_INFO "Interval = %ld\n", interval); + + ctrl_outw(interval, MTU2_TGRA_1); + ctrl_outw(0, MTU2_TCNT_1); + + clk_register(&mtu2_clk1); + clk_enable(&mtu2_clk1); + + return 0; +} + +struct sys_timer_ops mtu2_timer_ops = { + .init = mtu2_timer_init, + .start = mtu2_timer_start, + .stop = mtu2_timer_stop, + .get_frequency = mtu2_timer_get_frequency, + .get_offset = mtu2_timer_get_offset, +}; + +struct sys_timer mtu2_timer = { + .name = "mtu2", + .ops = &mtu2_timer_ops, +}; diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c index dc1f631053a8..a6bcc913d25e 100644 --- a/arch/sh/kernel/timers/timer.c +++ b/arch/sh/kernel/timers/timer.c @@ -16,6 +16,12 @@ static struct sys_timer *sys_timers[] __initdata = { #ifdef CONFIG_SH_TMU &tmu_timer, +#endif +#ifdef CONFIG_SH_MTU2 + &mtu2_timer, +#endif +#ifdef CONFIG_SH_CMT + &cmt_timer, #endif NULL, }; diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 9dd606464d23..814a17586974 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -4,8 +4,12 @@ menu "Processor selection" # Processor families # config CPU_SH2 + select SH_WRITETHROUGH if !CPU_SH2A bool - select SH_WRITETHROUGH + +config CPU_SH2A + bool + select CPU_SH2 config CPU_SH3 bool @@ -40,6 +44,16 @@ config CPU_SUBTYPE_SH7604 bool "Support SH7604 processor" select CPU_SH2 +config CPU_SUBTYPE_SH7619 + bool "Support SH7619 processor" + select CPU_SH2 + +comment "SH-2A Processor Support" + +config CPU_SUBTYPE_SH7206 + bool "Support SH7206 processor" + select CPU_SH2A + comment "SH-3 Processor Support" config CPU_SUBTYPE_SH7300 @@ -274,7 +288,6 @@ config SH_DIRECT_MAPPED config SH_WRITETHROUGH bool "Use write-through caching" - default y if CPU_SH2 help Selecting this option will configure the caches in write-through mode, as opposed to the default write-back configuration. diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c index 2689cb24ea2b..6614033f6be9 100644 --- a/arch/sh/mm/cache-sh2.c +++ b/arch/sh/mm/cache-sh2.c @@ -5,6 +5,7 @@ * * Released under the terms of the GNU GPL v2.0. */ + #include #include @@ -14,37 +15,43 @@ #include #include -/* - * Calculate the OC address and set the way bit on the SH-2. - * - * We must have already jump_to_P2()'ed prior to calling this - * function, since we rely on CCR manipulation to do the - * Right Thing(tm). - */ -unsigned long __get_oc_addr(unsigned long set, unsigned long way) +void __flush_wback_region(void *start, int size) { - unsigned long ccr; - - /* - * On SH-2 the way bit isn't tracked in the address field - * if we're doing address array access .. instead, we need - * to manually switch out the way in the CCR. - */ - ccr = ctrl_inl(CCR); - ccr &= ~0x00c0; - ccr |= way << cpu_data->dcache.way_shift; - - /* - * Despite the number of sets being halved, we end up losing - * the first 2 ways to OCRAM instead of the last 2 (if we're - * 4-way). As a result, forcibly setting the W1 bit handily - * bumps us up 2 ways. - */ - if (ccr & CCR_CACHE_ORA) - ccr |= 1 << (cpu_data->dcache.way_shift + 1); - - ctrl_outl(ccr, CCR); - - return CACHE_OC_ADDRESS_ARRAY | (set << cpu_data->dcache.entry_shift); + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + /* FIXME cache purge */ + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } +} + +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } +} + +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + } } diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index ac57638977ee..0571755e9a84 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -30,3 +30,5 @@ R7780MP SH_R7780MP TITAN SH_TITAN SHMIN SH_SHMIN 7710VOIPGW SH_7710VOIPGW +7206SE SH_7206_SOLUTION_ENGINE +7619SE SH_7619_SOLUTION_ENGINE -- cgit v1.2.3 From 0983b31849bbe1fe82520947acc1bec97c457d4b Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Sun, 5 Nov 2006 15:58:47 +0900 Subject: sh: Wire up division and address error exceptions on SH-2A. SH-2A has special division hardware as opposed to a full-fledged FPU, wire up the exception handlers for this. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/traps.c | 88 ++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 79 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 53dfa55f3156..1edec2709efe 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -33,8 +33,13 @@ #endif #ifdef CONFIG_CPU_SH2 -#define TRAP_RESERVED_INST 4 -#define TRAP_ILLEGAL_SLOT_INST 6 +# define TRAP_RESERVED_INST 4 +# define TRAP_ILLEGAL_SLOT_INST 6 +# define TRAP_ADDRESS_ERROR 9 +# ifdef CONFIG_CPU_SH2A +# define TRAP_DIVZERO_ERROR 17 +# define TRAP_DIVOVF_ERROR 18 +# endif #else #define TRAP_RESERVED_INST 12 #define TRAP_ILLEGAL_SLOT_INST 13 @@ -479,6 +484,14 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) return ret; } +#ifdef CONFIG_CPU_HAS_SR_RB +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x))) +#else +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x))) +#endif + /* * Handle various address error exceptions */ @@ -486,24 +499,37 @@ asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, unsigned long address) { - unsigned long error_code; + unsigned long error_code = 0; mm_segment_t oldfs; u16 instruction; int tmp; - asm volatile("stc r2_bank,%0": "=r" (error_code)); + /* Intentional ifdef */ +#ifdef CONFIG_CPU_HAS_SR_RB + lookup_exception_vector(error_code); +#endif oldfs = get_fs(); if (user_mode(regs)) { local_irq_enable(); current->thread.error_code = error_code; +#ifdef CONFIG_CPU_SH2 + /* + * On the SH-2, we only have a single vector for address + * errors, there's no differentiating between a load error + * and a store error. + */ + current->thread.trap_no = 9; +#else current->thread.trap_no = (writeaccess) ? 8 : 7; +#endif /* bad PC is not something we can fix */ if (regs->pc & 1) goto uspace_segv; +#ifndef CONFIG_CPU_SH2A set_fs(USER_DS); if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { /* Argh. Fault on the instruction itself. @@ -518,6 +544,7 @@ asmlinkage void do_address_error(struct pt_regs *regs, if (tmp==0) return; /* sorted */ +#endif uspace_segv: printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); @@ -526,6 +553,7 @@ asmlinkage void do_address_error(struct pt_regs *regs, if (regs->pc & 1) die("unaligned program counter", regs, error_code); +#ifndef CONFIG_CPU_SH2A set_fs(KERNEL_DS); if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { /* Argh. Fault on the instruction itself. @@ -537,6 +565,10 @@ asmlinkage void do_address_error(struct pt_regs *regs, handle_unaligned_access(instruction, regs); set_fs(oldfs); +#else + printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); + force_sig(SIGSEGV, current); +#endif } } @@ -569,6 +601,29 @@ int is_dsp_inst(struct pt_regs *regs) #define is_dsp_inst(regs) (0) #endif /* CONFIG_SH_DSP */ +#ifdef CONFIG_CPU_SH2A +asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs) +{ + siginfo_t info; + + current->thread.trap_no = r4; + current->thread.error_code = 0; + + switch (r4) { + case TRAP_DIVZERO_ERROR: + info.si_code = FPE_INTDIV; + break; + case TRAP_DIVOVF_ERROR: + info.si_code = FPE_INTOVF; + break; + } + + force_sig_info(SIGFPE, &info, current); +} +#endif + /* arch/sh/kernel/cpu/sh4/fpu.c */ extern int do_fpu_inst(unsigned short, struct pt_regs *); extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, @@ -582,7 +637,7 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, struct task_struct *tsk = current; #ifdef CONFIG_SH_FPU_EMU - unsigned short inst; + unsigned short inst = 0; int err; get_user(inst, (unsigned short*)regs.pc); @@ -604,7 +659,8 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, } #endif - asm volatile("stc r2_bank, %0": "=r" (error_code)); + lookup_exception_vector(error_code); + local_irq_enable(); tsk->thread.error_code = error_code; tsk->thread.trap_no = TRAP_RESERVED_INST; @@ -663,7 +719,7 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, unsigned long error_code; struct task_struct *tsk = current; #ifdef CONFIG_SH_FPU_EMU - unsigned short inst; + unsigned short inst = 0; get_user(inst, (unsigned short *)regs.pc + 1); if (!do_fpu_inst(inst, ®s)) { @@ -675,7 +731,8 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, /* not a FPU inst. */ #endif - asm volatile("stc r2_bank, %0": "=r" (error_code)); + lookup_exception_vector(error_code); + local_irq_enable(); tsk->thread.error_code = error_code; tsk->thread.trap_no = TRAP_RESERVED_INST; @@ -689,7 +746,8 @@ asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, struct pt_regs regs) { long ex; - asm volatile("stc r2_bank, %0" : "=r" (ex)); + + lookup_exception_vector(ex); die_if_kernel("exception", ®s, ex); } @@ -741,6 +799,10 @@ void *set_exception_table_vec(unsigned int vec, void *handler) return old_handler; } +extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs regs); + void __init trap_init(void) { set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); @@ -759,6 +821,14 @@ void __init trap_init(void) set_exception_table_evt(0x800, do_fpu_state_restore); set_exception_table_evt(0x820, do_fpu_state_restore); #endif + +#ifdef CONFIG_CPU_SH2 + set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler); +#endif +#ifdef CONFIG_CPU_SH2A + set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); + set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#endif /* Setup VBR for boot cpu */ per_cpu_trap_init(); -- cgit v1.2.3 From de39840646a223ae13a346048c280b7c871bf56e Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Sun, 5 Nov 2006 16:15:19 +0900 Subject: sh: Exception vector rework and SH-2/SH-2A support. This splits out common bits from the existing exception handler for use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A exceptions. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/entry.S | 325 ++++++++++++++++ arch/sh/kernel/cpu/sh2/ex.S | 46 +++ arch/sh/kernel/cpu/sh3/Makefile | 2 +- arch/sh/kernel/cpu/sh3/entry.S | 526 +++++++++++++++++++++++++ arch/sh/kernel/cpu/sh4/Makefile | 3 +- arch/sh/kernel/entry-common.S | 372 ++++++++++++++++++ arch/sh/kernel/entry.S | 843 ---------------------------------------- arch/sh/kernel/head.S | 12 +- 8 files changed, 1282 insertions(+), 847 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh2/entry.S create mode 100644 arch/sh/kernel/cpu/sh2/ex.S create mode 100644 arch/sh/kernel/cpu/sh3/entry.S create mode 100644 arch/sh/kernel/entry-common.S delete mode 100644 arch/sh/kernel/entry.S (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S new file mode 100644 index 000000000000..298d9191909d --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -0,0 +1,325 @@ +/* + * arch/sh/kernel/cpu/sh2/entry.S + * + * The SH-2 exception entry + * + * Copyright (C) 2005,2006 Yoshinori Sato + * Copyright (C) 2005 AXE,Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include + +ENTRY(exception_handler) + ! already saved r0/r1 + mov.l r2,@-sp + mov.l r3,@-sp + mov r0,r1 + cli + mov.l $cpu_mode,r2 + mov.l @r2,r0 + mov.l @(5*4,r15),r3 ! previous SR + shll2 r3 ! set "S" flag + rotl r0 ! T <- "S" flag + rotl r0 ! "S" flag is LSB + rotcr r3 ! T -> r3:b30 + shlr r3 + shlr r0 + bt/s 1f + mov.l r3,@(5*4,r15) ! copy cpu mode to SR + ! switch to kernel mode + mov #1,r0 + rotr r0 + rotr r0 + mov.l r0,@r2 ! enter kernel mode + mov.l $current_thread_info,r2 + mov.l @r2,r2 + mov #0x20,r0 + shll8 r0 + add r2,r0 + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + add #-4,r15 ! dummy + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(4*4,r2),r0 + mov.l @(5*4,r2),r1 + mov.l r1,@-r15 ! original SR + sts.l pr,@-r15 + mov.l r0,@-r15 ! original PC + mov r2,r3 + add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame + mov.l r3,@-r15 ! original SP + mov.l r14,@-r15 + mov.l r13,@-r15 + mov.l r12,@-r15 + mov.l r11,@-r15 + mov.l r10,@-r15 + mov.l r9,@-r15 + mov.l r8,@-r15 + mov.l r7,@-r15 + mov.l r6,@-r15 + mov.l r5,@-r15 + mov.l r4,@-r15 + mov r2,r8 ! copy user -> kernel stack + mov.l @r8+,r3 + mov.l r3,@-r15 + mov.l @r8+,r2 + mov.l r2,@-r15 + mov.l @r8+,r1 + mov.l r1,@-r15 + mov.l @r8+,r0 + bra 2f + mov.l r0,@-r15 +1: + ! in kernel exception + mov #(22-4-4-1)*4+4,r0 + mov r15,r2 + sub r0,r15 + mov.l @r2+,r0 ! old R3 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R2 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R1 + mov.l r0,@-r15 + mov.l @r2+,r0 ! old R0 + mov.l r0,@-r15 + mov.l @r2+,r3 ! old PC + mov.l @r2+,r0 ! old SR + add #-4,r2 ! exception frame stub (sr) + mov.l r1,@-r2 ! TRA + sts.l macl, @-r2 + sts.l mach, @-r2 + stc.l gbr, @-r2 + mov.l r0,@-r2 ! save old SR + sts.l pr,@-r2 + mov.l r3,@-r2 ! save old PC + mov r2,r0 + add #8*4,r0 + mov.l r0,@-r2 ! save old SP + mov.l r14,@-r2 + mov.l r13,@-r2 + mov.l r12,@-r2 + mov.l r11,@-r2 + mov.l r10,@-r2 + mov.l r9,@-r2 + mov.l r8,@-r2 + mov.l r7,@-r2 + mov.l r6,@-r2 + mov.l r5,@-r2 + mov.l r4,@-r2 + mov.l @(OFF_R0,r15),r0 + mov.l @(OFF_R1,r15),r1 + mov.l @(OFF_R2,r15),r2 + mov.l @(OFF_R3,r15),r3 +2: + mov #OFF_TRA,r8 + add r15,r8 + mov.l @r8,r9 + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #32,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 32 is trap + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 + mov #0,r9 + cmp/eq r9,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov.l 6f,r9 + mov.l 7f,r8 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long do_exception_error + +trap_entry: + add #-0x10,r9 + shll2 r9 ! TRA + mov #OFF_TRA,r8 + add r15,r8 + mov.l r9,@r8 + mov r9,r8 + sti + bra system_call + nop + + .align 2 +1: .long syscall_exit +2: .long break_point_trap_software +3: .long NR_syscalls +4: .long sys_call_table + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +debug_kernel_fw: + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov #OFF_SR,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov #OFF_SP,r2 + mov.l @(r0,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@r0 + mov.l r1,@(8,r0) + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + add #8,r15 + lds.l @r15+, pr + rte + mov.l @r15+,r15 + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_handler) + mov r15,r4 ! regs + add #4,r4 + mov #OFF_PC,r0 + mov.l @(r0,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + .align 2 + +1: .long do_address_error + +restore_all: + cli + mov r15,r0 + mov.l $cpu_mode,r2 + mov #OFF_SR,r3 + mov.l @(r0,r3),r1 + mov.l r1,@r2 + shll2 r1 ! clear MD bit + shlr2 r1 + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov #OFF_PC,r3 + mov.l @(r0,r3),r1 + mov.l r1,@r2 ! set pc + add #4*16+4,r0 + lds.l @r0+,pr + add #4,r0 ! skip sr + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 + mov.l r0,@r1 + mov.l @r15+,r0 + mov.l @r15+,r1 + mov.l @r15+,r2 + mov.l @r15+,r3 + mov.l @r15+,r4 + mov.l @r15+,r5 + mov.l @r15+,r6 + mov.l @r15+,r7 + mov.l @r15+,r8 + mov.l @r15+,r9 + mov.l @r15+,r10 + mov.l @r15+,r11 + mov.l @r15+,r12 + mov.l @r15+,r13 + mov.l @r15+,r14 + mov.l @r15,r15 + rte + nop +2: + mov.l 1f,r8 + mov.l 2f,r9 + jmp @r9 + lds r8,pr + + .align 2 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode + +! common exception handler +#include "../../entry-common.S" + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .long 0x40000000 + + .section .bss +__current_thread_info: + .long 0 + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S new file mode 100644 index 000000000000..6d285af7846c --- /dev/null +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -0,0 +1,46 @@ +/* + * arch/sh/kernel/cpu/sh2/ex.S + * + * The SH-2 exception vector table + * + * Copyright (C) 2005 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include + +! +! convert Exception Vector to Exception Number +! +exception_entry: +no = 0 + .rept 256 + mov.l r0,@-sp + mov #no,r0 + bra exception_trampoline + and #0xff,r0 +no = no + 1 + .endr +exception_trampoline: + mov.l r1,@-sp + mov.l $exception_handler,r1 + jmp @r1 + + .align 2 +$exception_entry: + .long exception_entry +$exception_handler: + .long exception_handler +! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry + vector * 8 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 58d3815695ff..83905e4e4387 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH SH-3 backends. # -obj-y := ex.o probe.o +obj-y := ex.o probe.o entry.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S new file mode 100644 index 000000000000..8bcd63f9f351 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -0,0 +1,526 @@ +/* + * arch/sh/kernel/entry.S + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +! NOTE: +! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address +! to be jumped is too far, but it causes illegal slot exception. + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * NOTE: This code uses a convention that instructions in the delay slot + * of a transfer-control instruction are indented by an extra space, thus: + * + * jmp @k0 ! control-transfer instruction + * ldc k1, ssr ! delay slot + * + * Stack layout in 'ret_from_syscall': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in ptrace.c and ptrace.h + * + * r0 + * ... + * r15 = stack pointer + * spc + * pr + * ssr + * gbr + * mach + * macl + * syscall # + * + */ +#if defined(CONFIG_KGDB_NMI) +NMI_VEC = 0x1c0 ! Must catch early for debounce +#endif + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+8) +OFF_TRA = (16*4+6*4) + + +#define k0 r0 +#define k1 r1 +#define k2 r2 +#define k3 r3 +#define k4 r4 + +#define g_imask r6 /* r6_bank1 */ +#define k_g_imask r6_bank /* r6_bank1 */ +#define current r7 /* r7_bank1 */ + +#include + +/* + * Kernel mode register usage: + * k0 scratch + * k1 scratch + * k2 scratch (Exception code) + * k3 scratch (Return address) + * k4 scratch + * k5 reserved + * k6 Global Interrupt Mask (0--15 << 4) + * k7 CURRENT_THREAD_INFO (pointer to current thread info) + */ + +! +! TLB Miss / Initial Page write exception handling +! _and_ +! TLB hits, but the access violate the protection. +! It can be valid access, such as stack grow and/or C-O-W. +! +! +! Find the pmd/pte entry and loadtlb +! If it's not found, cause address error (SEGV) +! +! Although this could be written in assembly language (and it'd be faster), +! this first version depends *much* on C implementation. +! + +#if defined(CONFIG_MMU) + .align 2 +ENTRY(tlb_miss_load) + bra call_dpf + mov #0, r5 + + .align 2 +ENTRY(tlb_miss_store) + bra call_dpf + mov #1, r5 + + .align 2 +ENTRY(initial_page_write) + bra call_dpf + mov #1, r5 + + .align 2 +ENTRY(tlb_protection_violation_load) + bra call_dpf + mov #0, r5 + + .align 2 +ENTRY(tlb_protection_violation_store) + bra call_dpf + mov #1, r5 + +call_dpf: + mov.l 1f, r0 + mov r5, r8 + mov.l @r0, r6 + mov r6, r9 + mov.l 2f, r0 + sts pr, r10 + jsr @r0 + mov r15, r4 + ! + tst r0, r0 + bf/s 0f + lds r10, pr + rts + nop +0: sti + mov.l 3f, r0 + mov r9, r6 + mov r8, r5 + jmp @r0 + mov r15, r4 + + .align 2 +1: .long MMU_TEA +2: .long __do_page_fault +3: .long do_page_fault + + .align 2 +ENTRY(address_error_load) + bra call_dae + mov #0,r5 ! writeaccess = 0 + + .align 2 +ENTRY(address_error_store) + bra call_dae + mov #1,r5 ! writeaccess = 1 + + .align 2 +call_dae: + mov.l 1f, r0 + mov.l @r0, r6 ! address + mov.l 2f, r0 + jmp @r0 + mov r15, r4 ! regs + + .align 2 +1: .long MMU_TEA +2: .long do_address_error +#endif /* CONFIG_MMU */ + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +debug_kernel_fw: + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + stc sr, r8 + mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F + or r9, r8 + ldc r8, sr ! here, change the register bank + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + mov.l @r15+, k0 + ldc.l @r15+, spc + lds.l @r15+, pr + mov.l @r15+, k1 + ldc.l @r15+, gbr + lds.l @r15+, mach + lds.l @r15+, macl + mov k0, r15 + ! + mov.l 2f, k0 + mov.l @k0, k0 + jmp @k0 + ldc k1, ssr + .align 2 +1: .long 0x300000f0 +2: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +restore_all: + mov.l @r15+, r0 + mov.l @r15+, r1 + mov.l @r15+, r2 + mov.l @r15+, r3 + mov.l @r15+, r4 + mov.l @r15+, r5 + mov.l @r15+, r6 + mov.l @r15+, r7 + ! + stc sr, r8 + mov.l 7f, r9 + or r9, r8 ! BL =1, RB=1 + ldc r8, sr ! here, change the register bank + ! + mov.l @r15+, r8 + mov.l @r15+, r9 + mov.l @r15+, r10 + mov.l @r15+, r11 + mov.l @r15+, r12 + mov.l @r15+, r13 + mov.l @r15+, r14 + mov.l @r15+, k4 ! original stack pointer + ldc.l @r15+, spc + lds.l @r15+, pr + mov.l @r15+, k3 ! original SR + ldc.l @r15+, gbr + lds.l @r15+, mach + lds.l @r15+, macl + add #4, r15 ! Skip syscall number + ! +#ifdef CONFIG_SH_DSP + mov.l @r15+, k0 ! DSP mode marker + mov.l 5f, k1 + cmp/eq k0, k1 ! Do we have a DSP stack frame? + bf skip_restore + + stc sr, k0 ! Enable CPU DSP mode + or k1, k0 ! (within kernel it may be disabled) + ldc k0, sr + mov r2, k0 ! Backup r2 + + ! Restore DSP registers from stack + mov r15, r2 + movs.l @r2+, a1 + movs.l @r2+, a0g + movs.l @r2+, a1g + movs.l @r2+, m0 + movs.l @r2+, m1 + mov r2, r15 + + lds.l @r15+, a0 + lds.l @r15+, x0 + lds.l @r15+, x1 + lds.l @r15+, y0 + lds.l @r15+, y1 + lds.l @r15+, dsr + ldc.l @r15+, rs + ldc.l @r15+, re + ldc.l @r15+, mod + + mov k0, r2 ! Restore r2 +skip_restore: +#endif + ! + ! Calculate new SR value + mov k3, k2 ! original SR value + mov #0xf0, k1 + extu.b k1, k1 + not k1, k1 + and k1, k2 ! Mask orignal SR value + ! + mov k3, k0 ! Calculate IMASK-bits + shlr2 k0 + and #0x3c, k0 + cmp/eq #0x3c, k0 + bt/s 6f + shll2 k0 + mov g_imask, k0 + ! +6: or k0, k2 ! Set the IMASK-bits + ldc k2, ssr + ! +#if defined(CONFIG_KGDB_NMI) + ! Clear in_nmi + mov.l 6f, k0 + mov #0, k1 + mov.b k1, @k0 +#endif + mov.l @r15+, k2 ! restore EXPEVT + mov k4, r15 + rte + nop + + .align 2 +5: .long 0x00001000 ! DSP +7: .long 0x30000000 + +! common exception handler +#include "../../entry.S" + +! Exception Vector Base +! +! Should be aligned page boundary. +! + .balign 4096,0,4096 +ENTRY(vbr_base) + .long 0 +! + .balign 256,0,256 +general_exception: + mov.l 1f, k2 + mov.l 2f, k3 + bra handle_exception + mov.l @k2, k2 + .align 2 +1: .long EXPEVT +2: .long ret_from_exception +! +! + .balign 1024,0,1024 +tlb_miss: + mov.l 1f, k2 + mov.l 4f, k3 + bra handle_exception + mov.l @k2, k2 +! + .balign 512,0,512 +interrupt: + mov.l 2f, k2 + mov.l 3f, k3 +#if defined(CONFIG_KGDB_NMI) + ! Debounce (filter nested NMI) + mov.l @k2, k0 + mov.l 5f, k1 + cmp/eq k1, k0 + bf 0f + mov.l 6f, k1 + tas.b @k1 + bt 0f + rte + nop + .align 2 +5: .long NMI_VEC +6: .long in_nmi +0: +#endif /* defined(CONFIG_KGDB_NMI) */ + bra handle_exception + mov #-1, k2 ! interrupt exception marker + + .align 2 +1: .long EXPEVT +2: .long INTEVT +3: .long ret_from_irq +4: .long ret_from_exception + +! +! + .align 2 +ENTRY(handle_exception) + ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), + ! save all registers onto stack. + ! + stc ssr, k0 ! Is it from kernel space? + shll k0 ! Check MD bit (bit30) by shifting it into... + shll k0 ! ...the T bit + bt/s 1f ! It's a kernel to kernel transition. + mov r15, k0 ! save original stack to k0 + /* User space to kernel */ + mov #(THREAD_SIZE >> 8), k1 + shll8 k1 ! k1 := THREAD_SIZE + add current, k1 + mov k1, r15 ! change to kernel stack + ! +1: mov.l 2f, k1 + ! +#ifdef CONFIG_SH_DSP + mov.l r2, @-r15 ! Save r2, we need another reg + stc sr, k4 + mov.l 1f, r2 + tst r2, k4 ! Check if in DSP mode + mov.l @r15+, r2 ! Restore r2 now + bt/s skip_save + mov #0, k4 ! Set marker for no stack frame + + mov r2, k4 ! Backup r2 (in k4) for later + + ! Save DSP registers on stack + stc.l mod, @-r15 + stc.l re, @-r15 + stc.l rs, @-r15 + sts.l dsr, @-r15 + sts.l y1, @-r15 + sts.l y0, @-r15 + sts.l x1, @-r15 + sts.l x0, @-r15 + sts.l a0, @-r15 + + ! GAS is broken, does not generate correct "movs.l Ds,@-As" instr. + + ! FIXME: Make sure that this is still the case with newer toolchains, + ! as we're not at all interested in supporting ancient toolchains at + ! this point. -- PFM. + + mov r15, r2 + .word 0xf653 ! movs.l a1, @-r2 + .word 0xf6f3 ! movs.l a0g, @-r2 + .word 0xf6d3 ! movs.l a1g, @-r2 + .word 0xf6c3 ! movs.l m0, @-r2 + .word 0xf6e3 ! movs.l m1, @-r2 + mov r2, r15 + + mov k4, r2 ! Restore r2 + mov.l 1f, k4 ! Force DSP stack frame +skip_save: + mov.l k4, @-r15 ! Push DSP mode marker onto stack +#endif + ! Save the user registers on the stack. + mov.l k2, @-r15 ! EXPEVT + + mov #-1, k4 + mov.l k4, @-r15 ! set TRA (default: -1) + ! + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + stc.l ssr, @-r15 + sts.l pr, @-r15 + stc.l spc, @-r15 + ! + lds k3, pr ! Set the return address to pr + ! + mov.l k0, @-r15 ! save orignal stack + mov.l r14, @-r15 + mov.l r13, @-r15 + mov.l r12, @-r15 + mov.l r11, @-r15 + mov.l r10, @-r15 + mov.l r9, @-r15 + mov.l r8, @-r15 + ! + stc sr, r8 ! Back to normal register bank, and + or k1, r8 ! Block all interrupts + mov.l 3f, k1 + and k1, r8 ! ... + ldc r8, sr ! ...changed here. + ! + mov.l r7, @-r15 + mov.l r6, @-r15 + mov.l r5, @-r15 + mov.l r4, @-r15 + mov.l r3, @-r15 + mov.l r2, @-r15 + mov.l r1, @-r15 + mov.l r0, @-r15 + + /* + * This gets a bit tricky.. in the INTEVT case we don't want to use + * the VBR offset as a destination in the jump call table, since all + * of the destinations are the same. In this case, (interrupt) sets + * a marker in r2 (now r2_bank since SR.RB changed), which we check + * to determine the exception type. For all other exceptions, we + * forcibly read EXPEVT from memory and fix up the jump address, in + * the interrupt exception case we jump to do_IRQ() and defer the + * INTEVT read until there. As a bonus, we can also clean up the SR.RB + * checks that do_IRQ() was doing.. + */ + stc r2_bank, r8 + cmp/pz r8 + bf interrupt_exception + shlr2 r8 + shlr r8 + mov.l 4f, r9 + add r8, r9 + mov.l @r9, r9 + jmp @r9 + nop + rts + nop + + .align 2 +1: .long 0x00001000 ! DSP=1 +2: .long 0x000080f0 ! FD=1, IMASK=15 +3: .long 0xcfffffff ! RB=0, BL=0 +4: .long exception_handling_table + +interrupt_exception: + mov.l 1f, r9 + jmp @r9 + nop + rts + nop + + .align 2 +1: .long do_IRQ + + .align 2 +ENTRY(exception_none) + rts + nop diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index 8dbf3895ece7..6e415baf04b4 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -2,7 +2,8 @@ # Makefile for the Linux/SuperH SH-4 backends. # -obj-y := ex.o probe.o +obj-y := ex.o probe.o common.o +common-y += $(addprefix ../sh3/, entry.o) obj-$(CONFIG_SH_FPU) += fpu.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S new file mode 100644 index 000000000000..5bc7fa91d095 --- /dev/null +++ b/arch/sh/kernel/entry-common.S @@ -0,0 +1,372 @@ +/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ + * + * linux/arch/sh/entry.S + * + * Copyright (C) 1999, 2000, 2002 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +! NOTE: +! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address +! to be jumped is too far, but it causes illegal slot exception. + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * NOTE: This code uses a convention that instructions in the delay slot + * of a transfer-control instruction are indented by an extra space, thus: + * + * jmp @k0 ! control-transfer instruction + * ldc k1, ssr ! delay slot + * + * Stack layout in 'ret_from_syscall': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in ptrace.c and ptrace.h + * + * r0 + * ... + * r15 = stack pointer + * spc + * pr + * ssr + * gbr + * mach + * macl + * syscall # + * + */ + +#if defined(CONFIG_PREEMPT) +# define preempt_stop() cli +#else +# define preempt_stop() +# define resume_kernel __restore_all +#endif + +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) +! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. +! If both are configured, handle the debug traps (breakpoints) in SW, +! but still allow BIOS traps to FW. + + .align 2 +debug_kernel: +#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) + /* Force BIOS call to FW (debug_trap put TRA in r8) */ + mov r8,r0 + shlr2 r0 + cmp/eq #0x3f,r0 + bt debug_kernel_fw +#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ + +debug_enter: +#if defined(CONFIG_SH_KGDB) + /* Jump to kgdb, pass stacked regs as arg */ +debug_kernel_sw: + mov.l 3f, r0 + jmp @r0 + mov r15, r4 + .align 2 +3: .long kgdb_handle_exception +#endif /* CONFIG_SH_KGDB */ + +#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ + + + .align 2 +debug_trap: +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + bt/s debug_kernel +#endif + mov.l @r15, r0 ! Restore R0 value + mov.l 1f, r8 + jmp @r8 + nop + + .align 2 +ENTRY(exception_error) + ! + sti + mov.l 2f, r0 + jmp @r0 + nop + +! + .align 2 +1: .long break_point_trap_software +2: .long do_exception_error + + .align 2 +ret_from_exception: + preempt_stop() +ENTRY(ret_from_irq) + ! + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + shll r0 + shll r0 ! kernel space? + get_current_thread_info r8, r0 + bt resume_kernel ! Yes, it's from kernel, go back soon + +#ifdef CONFIG_PREEMPT + bra resume_userspace + nop +ENTRY(resume_kernel) + mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count + tst r0, r0 + bf noresched +need_resched: + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_NEED_RESCHED, r0 ! need_resched set? + bt noresched + + mov #OFF_SR, r0 + mov.l @(r0,r15), r0 ! get status register + and #0xf0, r0 ! interrupts off (exception path)? + cmp/eq #0xf0, r0 + bt noresched + + mov.l 1f, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + + sti + mov.l 2f, r0 + jsr @r0 + nop + mov #0, r0 + mov.l r0, @(TI_PRE_COUNT,r8) + cli + + bra need_resched + nop +noresched: + bra __restore_all + nop + + .align 2 +1: .long PREEMPT_ACTIVE +2: .long schedule +#endif + +ENTRY(resume_userspace) + ! r8: current_thread_info + cli + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt/s __restore_all + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +work_pending: + ! r0: current_thread_info->flags + ! r8: current_thread_info + ! t: result of "tst #_TIF_NEED_RESCHED, r0" + bf/s work_resched + tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 +work_notifysig: + bt/s __restore_all + mov r15, r4 + mov r12, r5 ! set arg1(save_r0) + mov r0, r6 + mov.l 2f, r1 + mov.l 3f, r0 + jmp @r1 + lds r0, pr +work_resched: +#ifndef CONFIG_PREEMPT + ! gUSA handling + mov.l @(OFF_SP,r15), r0 ! get user space stack pointer + mov r0, r1 + shll r0 + bf/s 1f + shll r0 + bf/s 1f + mov #OFF_PC, r0 + ! SP >= 0xc0000000 : gUSA mark + mov.l @(r0,r15), r2 ! get user space PC (program counter) + mov.l @(OFF_R0,r15), r3 ! end point + cmp/hs r3, r2 ! r2 >= r3? + bt 1f + add r3, r1 ! rewind point #2 + mov.l r1, @(r0,r15) ! reset PC to rewind point #2 + ! +1: +#endif + mov.l 1f, r1 + jsr @r1 ! schedule + nop + cli + ! + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_WORK_MASK, r0 + bt __restore_all + bra work_pending + tst #_TIF_NEED_RESCHED, r0 + + .align 2 +1: .long schedule +2: .long do_notify_resume +3: .long restore_all + + .align 2 +syscall_exit_work: + ! r0: current_thread_info->flags + ! r8: current_thread_info + tst #_TIF_SYSCALL_TRACE, r0 + bt/s work_pending + tst #_TIF_NEED_RESCHED, r0 + sti + ! XXX setup arguments... + mov.l 4f, r0 ! do_syscall_trace + jsr @r0 + nop + bra resume_userspace + nop + + .align 2 +syscall_trace_entry: + ! Yes it is traced. + ! XXX setup arguments... + mov.l 4f, r11 ! Call do_syscall_trace which notifies + jsr @r11 ! superior (will chomp R[0-7]) + nop + ! Reload R0-R4 from kernel stack, where the + ! parent may have modified them using + ! ptrace(POKEUSR). (Note that R0-R2 are + ! used by the system call handler directly + ! from the kernel stack anyway, so don't need + ! to be reloaded here.) This allows the parent + ! to rewrite system calls and args on the fly. + mov.l @(OFF_R4,r15), r4 ! arg0 + mov.l @(OFF_R5,r15), r5 + mov.l @(OFF_R6,r15), r6 + mov.l @(OFF_R7,r15), r7 ! arg3 + mov.l @(OFF_R3,r15), r3 ! syscall_nr + ! Arrange for do_syscall_trace to be called + ! again as the system call returns. + mov.l 2f, r10 ! Number of syscalls + cmp/hs r10, r3 + bf syscall_call + mov #-ENOSYS, r0 + bra syscall_exit + mov.l r0, @(OFF_R0,r15) ! Return value + +__restore_all: + mov.l 1f,r0 + jmp @r0 + nop + + .align 2 +1: .long restore_all + +/* + * Syscall interface: + * + * Syscall #: R3 + * Arguments #0 to #3: R4--R7 + * Arguments #4 to #6: R0, R1, R2 + * TRA: (number of arguments + 0x10) x 4 + * + * This code also handles delegating other traps to the BIOS/gdb stub + * according to: + * + * Trap number + * (TRA>>2) Purpose + * -------- ------- + * 0x0-0xf old syscall ABI + * 0x10-0x1f new syscall ABI + * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. + * + * Note: When we're first called, the TRA value must be shifted + * right 2 bits in order to get the value that was used as the "trapa" + * argument. + */ + + .align 2 + .globl ret_from_fork +ret_from_fork: + mov.l 1f, r8 + jsr @r8 + mov r0, r4 + bra syscall_exit + nop + .align 2 +1: .long schedule_tail + ! +ENTRY(system_call) +#if !defined(CONFIG_CPU_SH2) + mov.l 1f, r9 + mov.l @r9, r8 ! Read from TRA (Trap Address) Register +#endif + ! + ! Is the trap argument >= 0x20? (TRA will be >= 0x80) + mov #0x7f, r9 + cmp/hi r9, r8 + bt/s 0f + mov #OFF_TRA, r9 + add r15, r9 + ! + mov.l r8, @r9 ! set TRA value to tra + sti + ! Call the system call handler through the table. + ! First check for bad syscall number + mov r3, r9 + mov.l 2f, r8 ! Number of syscalls + cmp/hs r8, r9 + get_current_thread_info r8, r10 + bf good_system_call +syscall_badsys: ! Bad syscall number + mov #-ENOSYS, r0 + bra resume_userspace + mov.l r0, @(OFF_R0,r15) ! Return value + ! +0: + bra debug_trap + nop + ! +good_system_call: ! Good syscall number + mov.l @(TI_FLAGS,r8), r8 + mov #_TIF_SYSCALL_TRACE, r10 + tst r10, r8 + bf syscall_trace_entry + ! +syscall_call: + shll2 r9 ! x4 + mov.l 3f, r8 ! Load the address of sys_call_table + add r8, r9 + mov.l @r9, r8 + jsr @r8 ! jump to specific syscall handler + nop + mov.l @(OFF_R0,r15), r12 ! save r0 + mov.l r0, @(OFF_R0,r15) ! save the return value + ! +syscall_exit: + cli + ! + get_current_thread_info r8, r0 + mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags + tst #_TIF_ALLWORK_MASK, r0 + bf syscall_exit_work + bra __restore_all + nop + .align 2 +#if !defined(CONFIG_CPU_SH2) +1: .long TRA +#endif +2: .long NR_syscalls +3: .long sys_call_table +4: .long do_syscall_trace diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S deleted file mode 100644 index 39aaefb2d83f..000000000000 --- a/arch/sh/kernel/entry.S +++ /dev/null @@ -1,843 +0,0 @@ -/* - * linux/arch/sh/entry.S - * - * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ -#include -#include -#include -#include -#include -#include -#include - -! NOTE: -! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address -! to be jumped is too far, but it causes illegal slot exception. - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - * NOTE: This code uses a convention that instructions in the delay slot - * of a transfer-control instruction are indented by an extra space, thus: - * - * jmp @k0 ! control-transfer instruction - * ldc k1, ssr ! delay slot - * - * Stack layout in 'ret_from_syscall': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be - * updated in ptrace.c and ptrace.h - * - * r0 - * ... - * r15 = stack pointer - * spc - * pr - * ssr - * gbr - * mach - * macl - * syscall # - * - */ -#if defined(CONFIG_KGDB_NMI) -NMI_VEC = 0x1c0 ! Must catch early for debounce -#endif - -/* Offsets to the stack */ -OFF_R0 = 0 /* Return value. New ABI also arg4 */ -OFF_R1 = 4 /* New ABI: arg5 */ -OFF_R2 = 8 /* New ABI: arg6 */ -OFF_R3 = 12 /* New ABI: syscall_nr */ -OFF_R4 = 16 /* New ABI: arg0 */ -OFF_R5 = 20 /* New ABI: arg1 */ -OFF_R6 = 24 /* New ABI: arg2 */ -OFF_R7 = 28 /* New ABI: arg3 */ -OFF_SP = (15*4) -OFF_PC = (16*4) -OFF_SR = (16*4+8) -OFF_TRA = (16*4+6*4) - - -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - -#define g_imask r6 /* r6_bank1 */ -#define k_g_imask r6_bank /* r6_bank1 */ -#define current r7 /* r7_bank1 */ - -/* - * Kernel mode register usage: - * k0 scratch - * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) - */ - -! -! TLB Miss / Initial Page write exception handling -! _and_ -! TLB hits, but the access violate the protection. -! It can be valid access, such as stack grow and/or C-O-W. -! -! -! Find the pmd/pte entry and loadtlb -! If it's not found, cause address error (SEGV) -! -! Although this could be written in assembly language (and it'd be faster), -! this first version depends *much* on C implementation. -! - -#define CLI() \ - stc sr, r0; \ - or #0xf0, r0; \ - ldc r0, sr - -#define STI() \ - mov.l __INV_IMASK, r11; \ - stc sr, r10; \ - and r11, r10; \ - stc k_g_imask, r11; \ - or r11, r10; \ - ldc r10, sr - -#if defined(CONFIG_PREEMPT) -# define preempt_stop() CLI() -#else -# define preempt_stop() -# define resume_kernel restore_all -#endif - -#if defined(CONFIG_MMU) - .align 2 -ENTRY(tlb_miss_load) - bra call_dpf - mov #0, r5 - - .align 2 -ENTRY(tlb_miss_store) - bra call_dpf - mov #1, r5 - - .align 2 -ENTRY(initial_page_write) - bra call_dpf - mov #1, r5 - - .align 2 -ENTRY(tlb_protection_violation_load) - bra call_dpf - mov #0, r5 - - .align 2 -ENTRY(tlb_protection_violation_store) - bra call_dpf - mov #1, r5 - -call_dpf: - mov.l 1f, r0 - mov r5, r8 - mov.l @r0, r6 - mov r6, r9 - mov.l 2f, r0 - sts pr, r10 - jsr @r0 - mov r15, r4 - ! - tst r0, r0 - bf/s 0f - lds r10, pr - rts - nop -0: STI() - mov.l 3f, r0 - mov r9, r6 - mov r8, r5 - jmp @r0 - mov r15, r4 - - .align 2 -1: .long MMU_TEA -2: .long __do_page_fault -3: .long do_page_fault - - .align 2 -ENTRY(address_error_load) - bra call_dae - mov #0,r5 ! writeaccess = 0 - - .align 2 -ENTRY(address_error_store) - bra call_dae - mov #1,r5 ! writeaccess = 1 - - .align 2 -call_dae: - mov.l 1f, r0 - mov.l @r0, r6 ! address - mov.l 2f, r0 - jmp @r0 - mov r15, r4 ! regs - - .align 2 -1: .long MMU_TEA -2: .long do_address_error -#endif /* CONFIG_MMU */ - -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ - -#if defined(CONFIG_SH_STANDARD_BIOS) - /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - stc sr, r8 - mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F - or r9, r8 - ldc r8, sr ! here, change the register bank - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k0 - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k1 - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - mov k0, r15 - ! - mov.l 2f, k0 - mov.l @k0, k0 - jmp @k0 - ldc k1, ssr - .align 2 -1: .long 0x300000f0 -2: .long gdb_vbr_vector -#endif /* CONFIG_SH_STANDARD_BIOS */ - -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop - - .align 2 -ENTRY(exception_error) - ! - STI() - mov.l 2f, r0 - jmp @r0 - nop - -! - .align 2 -1: .long break_point_trap_software -2: .long do_exception_error - - .align 2 -ret_from_exception: - preempt_stop() -ENTRY(ret_from_irq) - ! - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s resume_kernel ! Yes, it's from kernel, go back soon - GET_THREAD_INFO(r8) - -#ifdef CONFIG_PREEMPT - bra resume_userspace - nop -ENTRY(resume_kernel) - mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count - tst r0, r0 - bf noresched -need_resched: - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_NEED_RESCHED, r0 ! need_resched set? - bt noresched - - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - and #0xf0, r0 ! interrupts off (exception path)? - cmp/eq #0xf0, r0 - bt noresched - - mov.l 1f, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - - STI() - mov.l 2f, r0 - jsr @r0 - nop - mov #0, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - CLI() - - bra need_resched - nop -noresched: - bra restore_all - nop - - .align 2 -1: .long PREEMPT_ACTIVE -2: .long schedule -#endif - -ENTRY(resume_userspace) - ! r8: current_thread_info - CLI() - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt/s restore_all - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -work_pending: - ! r0: current_thread_info->flags - ! r8: current_thread_info - ! t: result of "tst #_TIF_NEED_RESCHED, r0" - bf/s work_resched - tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0 -work_notifysig: - bt/s restore_all - mov r15, r4 - mov r12, r5 ! set arg1(save_r0) - mov r0, r6 - mov.l 2f, r1 - mova restore_all, r0 - jmp @r1 - lds r0, pr -work_resched: -#ifndef CONFIG_PREEMPT - ! gUSA handling - mov.l @(OFF_SP,r15), r0 ! get user space stack pointer - mov r0, r1 - shll r0 - bf/s 1f - shll r0 - bf/s 1f - mov #OFF_PC, r0 - ! SP >= 0xc0000000 : gUSA mark - mov.l @(r0,r15), r2 ! get user space PC (program counter) - mov.l @(OFF_R0,r15), r3 ! end point - cmp/hs r3, r2 ! r2 >= r3? - bt 1f - add r3, r1 ! rewind point #2 - mov.l r1, @(r0,r15) ! reset PC to rewind point #2 - ! -1: -#endif - mov.l 1f, r1 - jsr @r1 ! schedule - nop - CLI() - ! - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt restore_all - bra work_pending - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -1: .long schedule -2: .long do_notify_resume - - .align 2 -syscall_exit_work: - ! r0: current_thread_info->flags - ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE, r0 - bt/s work_pending - tst #_TIF_NEED_RESCHED, r0 - STI() - ! XXX setup arguments... - mov.l 4f, r0 ! do_syscall_trace - jsr @r0 - nop - bra resume_userspace - nop - - .align 2 -syscall_trace_entry: - ! Yes it is traced. - ! XXX setup arguments... - mov.l 4f, r11 ! Call do_syscall_trace which notifies - jsr @r11 ! superior (will chomp R[0-7]) - nop - ! Reload R0-R4 from kernel stack, where the - ! parent may have modified them using - ! ptrace(POKEUSR). (Note that R0-R2 are - ! used by the system call handler directly - ! from the kernel stack anyway, so don't need - ! to be reloaded here.) This allows the parent - ! to rewrite system calls and args on the fly. - mov.l @(OFF_R4,r15), r4 ! arg0 - mov.l @(OFF_R5,r15), r5 - mov.l @(OFF_R6,r15), r6 - mov.l @(OFF_R7,r15), r7 ! arg3 - mov.l @(OFF_R3,r15), r3 ! syscall_nr - ! Arrange for do_syscall_trace to be called - ! again as the system call returns. - mov.l 2f, r10 ! Number of syscalls - cmp/hs r10, r3 - bf syscall_call - mov #-ENOSYS, r0 - bra syscall_exit - mov.l r0, @(OFF_R0,r15) ! Return value - -/* - * Syscall interface: - * - * Syscall #: R3 - * Arguments #0 to #3: R4--R7 - * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 - * - * This code also handles delegating other traps to the BIOS/gdb stub - * according to: - * - * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. - * - * Note: When we're first called, the TRA value must be shifted - * right 2 bits in order to get the value that was used as the "trapa" - * argument. - */ - - .align 2 - .globl ret_from_fork -ret_from_fork: - mov.l 1f, r8 - jsr @r8 - mov r0, r4 - bra syscall_exit - nop - .align 2 -1: .long schedule_tail - ! -ENTRY(system_call) - mov.l 1f, r9 - mov.l @r9, r8 ! Read from TRA (Trap Address) Register - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 - cmp/hi r9, r8 - bt/s 0f - mov #OFF_TRA, r9 - add r15, r9 - ! - mov.l r8, @r9 ! set TRA value to tra - STI() - ! Call the system call handler through the table. - ! First check for bad syscall number - mov r3, r9 - mov.l 2f, r8 ! Number of syscalls - cmp/hs r8, r9 - bf/s good_system_call - GET_THREAD_INFO(r8) -syscall_badsys: ! Bad syscall number - mov #-ENOSYS, r0 - bra resume_userspace - mov.l r0, @(OFF_R0,r15) ! Return value - ! -0: - bra debug_trap - nop - ! -good_system_call: ! Good syscall number - mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_SYSCALL_TRACE, r10 - tst r10, r8 - bf syscall_trace_entry - ! -syscall_call: - shll2 r9 ! x4 - mov.l 3f, r8 ! Load the address of sys_call_table - add r8, r9 - mov.l @r9, r8 - jsr @r8 ! jump to specific syscall handler - nop - mov.l @(OFF_R0,r15), r12 ! save r0 - mov.l r0, @(OFF_R0,r15) ! save the return value - ! -syscall_exit: - CLI() - ! - GET_THREAD_INFO(r8) - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_ALLWORK_MASK, r0 - bf syscall_exit_work -restore_all: - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - ! - stc sr, r8 - mov.l 7f, r9 - or r9, r8 ! BL =1, RB=1 - ldc r8, sr ! here, change the register bank - ! - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k4 ! original stack pointer - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k3 ! original SR - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - add #4, r15 ! Skip syscall number - ! -#ifdef CONFIG_SH_DSP - mov.l @r15+, k0 ! DSP mode marker - mov.l 5f, k1 - cmp/eq k0, k1 ! Do we have a DSP stack frame? - bf skip_restore - - stc sr, k0 ! Enable CPU DSP mode - or k1, k0 ! (within kernel it may be disabled) - ldc k0, sr - mov r2, k0 ! Backup r2 - - ! Restore DSP registers from stack - mov r15, r2 - movs.l @r2+, a1 - movs.l @r2+, a0g - movs.l @r2+, a1g - movs.l @r2+, m0 - movs.l @r2+, m1 - mov r2, r15 - - lds.l @r15+, a0 - lds.l @r15+, x0 - lds.l @r15+, x1 - lds.l @r15+, y0 - lds.l @r15+, y1 - lds.l @r15+, dsr - ldc.l @r15+, rs - ldc.l @r15+, re - ldc.l @r15+, mod - - mov k0, r2 ! Restore r2 -skip_restore: -#endif - ! - ! Calculate new SR value - mov k3, k2 ! original SR value - mov.l 9f, k1 - and k1, k2 ! Mask orignal SR value - ! - mov k3, k0 ! Calculate IMASK-bits - shlr2 k0 - and #0x3c, k0 - cmp/eq #0x3c, k0 - bt/s 6f - shll2 k0 - mov g_imask, k0 - ! -6: or k0, k2 ! Set the IMASK-bits - ldc k2, ssr - ! -#if defined(CONFIG_KGDB_NMI) - ! Clear in_nmi - mov.l 6f, k0 - mov #0, k1 - mov.b k1, @k0 -#endif - mov.l @r15+, k2 ! restore EXPEVT - mov k4, r15 - rte - nop - - .align 2 -1: .long TRA -2: .long NR_syscalls -3: .long sys_call_table -4: .long do_syscall_trace -5: .long 0x00001000 ! DSP -7: .long 0x30000000 -9: -__INV_IMASK: - .long 0xffffff0f ! ~(IMASK) - -! Exception Vector Base -! -! Should be aligned page boundary. -! - .balign 4096,0,4096 -ENTRY(vbr_base) - .long 0 -! - .balign 256,0,256 -general_exception: - mov.l 1f, k2 - mov.l 2f, k3 - bra handle_exception - mov.l @k2, k2 - .align 2 -1: .long EXPEVT -2: .long ret_from_exception -! -! - .balign 1024,0,1024 -tlb_miss: - mov.l 1f, k2 - mov.l 4f, k3 - bra handle_exception - mov.l @k2, k2 -! - .balign 512,0,512 -interrupt: - mov.l 2f, k2 - mov.l 3f, k3 -#if defined(CONFIG_KGDB_NMI) - ! Debounce (filter nested NMI) - mov.l @k2, k0 - mov.l 5f, k1 - cmp/eq k1, k0 - bf 0f - mov.l 6f, k1 - tas.b @k1 - bt 0f - rte - nop - .align 2 -5: .long NMI_VEC -6: .long in_nmi -0: -#endif /* defined(CONFIG_KGDB_NMI) */ - bra handle_exception - mov #-1, k2 ! interrupt exception marker - - .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long ret_from_exception - -! -! - .align 2 -ENTRY(handle_exception) - ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), - ! save all registers onto stack. - ! - stc ssr, k0 ! Is it from kernel space? - shll k0 ! Check MD bit (bit30) by shifting it into... - shll k0 ! ...the T bit - bt/s 1f ! It's a kernel to kernel transition. - mov r15, k0 ! save original stack to k0 - /* User space to kernel */ - mov #(THREAD_SIZE >> 8), k1 - shll8 k1 ! k1 := THREAD_SIZE - add current, k1 - mov k1, r15 ! change to kernel stack - ! -1: mov.l 2f, k1 - ! -#ifdef CONFIG_SH_DSP - mov.l r2, @-r15 ! Save r2, we need another reg - stc sr, k4 - mov.l 1f, r2 - tst r2, k4 ! Check if in DSP mode - mov.l @r15+, r2 ! Restore r2 now - bt/s skip_save - mov #0, k4 ! Set marker for no stack frame - - mov r2, k4 ! Backup r2 (in k4) for later - - ! Save DSP registers on stack - stc.l mod, @-r15 - stc.l re, @-r15 - stc.l rs, @-r15 - sts.l dsr, @-r15 - sts.l y1, @-r15 - sts.l y0, @-r15 - sts.l x1, @-r15 - sts.l x0, @-r15 - sts.l a0, @-r15 - - ! GAS is broken, does not generate correct "movs.l Ds,@-As" instr. - - ! FIXME: Make sure that this is still the case with newer toolchains, - ! as we're not at all interested in supporting ancient toolchains at - ! this point. -- PFM. - - mov r15, r2 - .word 0xf653 ! movs.l a1, @-r2 - .word 0xf6f3 ! movs.l a0g, @-r2 - .word 0xf6d3 ! movs.l a1g, @-r2 - .word 0xf6c3 ! movs.l m0, @-r2 - .word 0xf6e3 ! movs.l m1, @-r2 - mov r2, r15 - - mov k4, r2 ! Restore r2 - mov.l 1f, k4 ! Force DSP stack frame -skip_save: - mov.l k4, @-r15 ! Push DSP mode marker onto stack -#endif - ! Save the user registers on the stack. - mov.l k2, @-r15 ! EXPEVT - - mov #-1, k4 - mov.l k4, @-r15 ! set TRA (default: -1) - ! - sts.l macl, @-r15 - sts.l mach, @-r15 - stc.l gbr, @-r15 - stc.l ssr, @-r15 - sts.l pr, @-r15 - stc.l spc, @-r15 - ! - lds k3, pr ! Set the return address to pr - ! - mov.l k0, @-r15 ! save orignal stack - mov.l r14, @-r15 - mov.l r13, @-r15 - mov.l r12, @-r15 - mov.l r11, @-r15 - mov.l r10, @-r15 - mov.l r9, @-r15 - mov.l r8, @-r15 - ! - stc sr, r8 ! Back to normal register bank, and - or k1, r8 ! Block all interrupts - mov.l 3f, k1 - and k1, r8 ! ... - ldc r8, sr ! ...changed here. - ! - mov.l r7, @-r15 - mov.l r6, @-r15 - mov.l r5, @-r15 - mov.l r4, @-r15 - mov.l r3, @-r15 - mov.l r2, @-r15 - mov.l r1, @-r15 - mov.l r0, @-r15 - - /* - * This gets a bit tricky.. in the INTEVT case we don't want to use - * the VBR offset as a destination in the jump call table, since all - * of the destinations are the same. In this case, (interrupt) sets - * a marker in r2 (now r2_bank since SR.RB changed), which we check - * to determine the exception type. For all other exceptions, we - * forcibly read EXPEVT from memory and fix up the jump address, in - * the interrupt exception case we jump to do_IRQ() and defer the - * INTEVT read until there. As a bonus, we can also clean up the SR.RB - * checks that do_IRQ() was doing.. - */ - stc r2_bank, r8 - cmp/pz r8 - bf interrupt_exception - shlr2 r8 - shlr r8 - mov.l 4f, r9 - add r8, r9 - mov.l @r9, r9 - jmp @r9 - nop - rts - nop - - .align 2 -1: .long 0x00001000 ! DSP=1 -2: .long 0x000080f0 ! FD=1, IMASK=15 -3: .long 0xcfffffff ! RB=0, BL=0 -4: .long exception_handling_table - -interrupt_exception: - mov.l 1f, r9 - jmp @r9 - nop - rts - nop - - .align 2 -1: .long do_IRQ - - .align 2 -ENTRY(exception_none) - rts - nop diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index f5f53d14f245..b5ff23264617 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -53,8 +53,10 @@ ENTRY(_stext) ldc r0, sr ! Initialize global interrupt mask mov #0, r0 +#ifdef CONFIG_CPU_HAS_SR_RB ldc r0, r6_bank - +#endif + /* * Prefetch if possible to reduce cache miss penalty. * @@ -71,8 +73,10 @@ ENTRY(_stext) mov #(THREAD_SIZE >> 8), r1 shll8 r1 ! r1 = THREAD_SIZE sub r1, r0 ! +#ifdef CONFIG_CPU_HAS_SR_RB ldc r0, r7_bank ! ... and initial thread_info - +#endif + ! Clear BSS area mov.l 3f, r1 add #4, r1 @@ -95,7 +99,11 @@ ENTRY(_stext) nop .balign 4 +#if defined(CONFIG_CPU_SH2) +1: .long 0x000000F0 ! IMASK=0xF +#else 1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF +#endif 2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end -- cgit v1.2.3 From f36af3fd377081d3ac2ff6b63a60f8db8b3bf531 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Sun, 5 Nov 2006 16:21:09 +0900 Subject: sh: Add support for Solution Engine 7206 and 7619 boards. This adds support for the Solution Engine 7206 and 7619. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/boards/se/7206/Makefile | 7 + arch/sh/boards/se/7206/io.c | 123 ++++++ arch/sh/boards/se/7206/irq.c | 161 ++++++++ arch/sh/boards/se/7206/led.c | 57 +++ arch/sh/boards/se/7206/setup.c | 80 ++++ arch/sh/boards/se/7619/Makefile | 5 + arch/sh/boards/se/7619/io.c | 102 +++++ arch/sh/boards/se/7619/setup.c | 43 ++ arch/sh/configs/se7206_defconfig | 826 +++++++++++++++++++++++++++++++++++++++ 9 files changed, 1404 insertions(+) create mode 100644 arch/sh/boards/se/7206/Makefile create mode 100644 arch/sh/boards/se/7206/io.c create mode 100644 arch/sh/boards/se/7206/irq.c create mode 100644 arch/sh/boards/se/7206/led.c create mode 100644 arch/sh/boards/se/7206/setup.c create mode 100644 arch/sh/boards/se/7619/Makefile create mode 100644 arch/sh/boards/se/7619/io.c create mode 100644 arch/sh/boards/se/7619/setup.c create mode 100644 arch/sh/configs/se7206_defconfig (limited to 'arch') diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/se/7206/Makefile new file mode 100644 index 000000000000..63950f4f2453 --- /dev/null +++ b/arch/sh/boards/se/7206/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the 7206 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o + diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c new file mode 100644 index 000000000000..b557273e0cbe --- /dev/null +++ b/arch/sh/boards/se/7206/io.c @@ -0,0 +1,123 @@ +/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ + * + * linux/arch/sh/boards/se/7206/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7206 SolutionEngine. + * + */ + +#include +#include +#include +#include + + +static inline void delay(void) +{ + ctrl_inw(0x20000000); /* P2 ROM Area */ +} + +/* MS7750 requires special versions of in*, out* routines, since + PC-like io ports are located at upper half byte of 16-bit word which + can be accessed only with 16-bit wide. */ + +static inline volatile __u16 * +port2adr(unsigned int port) +{ + if (port >= 0x2000) + return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); + else if (port >= 0x300 || port < 0x310) + return (volatile __u16 *) (PA_SMSC + (port - 0x300)); +} + +unsigned char se7206_inb(unsigned long port) +{ + return (*port2adr(port))&0xff; +} + +unsigned char se7206_inb_p(unsigned long port) +{ + unsigned long v; + + v = (*port2adr(port))&0xff; + delay(); + return v; +} + +unsigned short se7206_inw(unsigned long port) +{ + return *port2adr(port);; +} + +unsigned int se7206_inl(unsigned long port) +{ + maybebadio(port); + return 0; +} + +void se7206_outb(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; +} + +void se7206_outb_p(unsigned char value, unsigned long port) +{ + *(port2adr(port)) = value; + delay(); +} + +void se7206_outw(unsigned short value, unsigned long port) +{ + *port2adr(port) = value; +} + +void se7206_outl(unsigned int value, unsigned long port) +{ + maybebadio(port); +} + +void se7206_insb(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u8 *ap = addr; + + while (count--) + *ap++ = *p; +} + +void se7206_insw(unsigned long port, void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + __u16 *ap = addr; + while (count--) + *ap++ = *p; +} + +void se7206_insl(unsigned long port, void *addr, unsigned long count) +{ + maybebadio(port); +} + +void se7206_outsb(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u8 *ap = addr; + + while (count--) + *p = *ap++; +} + +void se7206_outsw(unsigned long port, const void *addr, unsigned long count) +{ + volatile __u16 *p = port2adr(port); + const __u16 *ap = addr; + while (count--) + *p = *ap++; +} + +void se7206_outsl(unsigned long port, const void *addr, unsigned long count) +{ + maybebadio(port); +} diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c new file mode 100644 index 000000000000..8d5b278a124d --- /dev/null +++ b/arch/sh/boards/se/7206/irq.c @@ -0,0 +1,161 @@ +/* + * linux/arch/sh/boards/se/7206/irq.c + * + * Copyright (C) 2005,2006 Yoshinori Sato + * + * Hitachi SolutionEngine Support. + * + */ + +#include +#include +#include +#include +#include +#include + +#define INTSTS0 0x31800000 +#define INTSTS1 0x31800002 +#define INTMSK0 0x31800004 +#define INTMSK1 0x31800006 +#define INTSEL 0x31800008 + +/* shutdown is same as "disable" */ +#define shutdown_se7206_irq disable_se7206_irq + +static void disable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set the priority in IPR to 0 */ + val = ctrl_inw(INTC_IPR01); + val &= mask; + ctrl_outw(val, INTC_IPR01); + /* FPGA mask set */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 |= 0x0010; + break; + case IRQ1_IRQ: + msk0 |= 0x000f; + break; + case IRQ2_IRQ: + msk0 |= 0x0f00; + msk1 |= 0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static void enable_se7206_irq(unsigned int irq) +{ + unsigned short val; + unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); + unsigned short msk0,msk1; + + /* Set priority in IPR back to original value */ + val = ctrl_inw(INTC_IPR01); + val |= value; + ctrl_outw(val, INTC_IPR01); + + /* FPGA mask reset */ + msk0 = ctrl_inw(INTMSK0); + msk1 = ctrl_inw(INTMSK1); + + switch (irq) { + case IRQ0_IRQ: + msk0 &= ~0x0010; + break; + case IRQ1_IRQ: + msk0 &= ~0x000f; + break; + case IRQ2_IRQ: + msk0 &= ~0x0f00; + msk1 &= ~0x00ff; + break; + } + ctrl_outw(msk0, INTMSK0); + ctrl_outw(msk1, INTMSK1); +} + +static unsigned int startup_se7206_irq(unsigned int irq) +{ + enable_se7206_irq(irq); + return 0; /* never anything pending */ +} + +static void ack_se7206_irq(unsigned int irq) +{ + disable_se7206_irq(irq); +} + +static void end_se7206_irq(unsigned int irq) +{ + unsigned short sts0,sts1; + + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_se7206_irq(irq); + /* FPGA isr clear */ + sts0 = ctrl_inw(INTSTS0); + sts1 = ctrl_inw(INTSTS1); + + switch (irq) { + case IRQ0_IRQ: + sts0 &= ~0x0010; + break; + case IRQ1_IRQ: + sts0 &= ~0x000f; + break; + case IRQ2_IRQ: + sts0 &= ~0x0f00; + sts1 &= ~0x00ff; + break; + } + ctrl_outw(sts0, INTSTS0); + ctrl_outw(sts1, INTSTS1); +} + +static struct hw_interrupt_type se7206_irq_type = { + .typename = "SE7206 FPGA-IRQ", + .startup = startup_se7206_irq, + .shutdown = shutdown_se7206_irq, + .enable = enable_se7206_irq, + .disable = disable_se7206_irq, + .ack = ack_se7206_irq, + .end = end_se7206_irq, +}; + +static void make_se7206_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &se7206_irq_type; + disable_se7206_irq(irq); +} + +/* + * Initialize IRQ setting + */ +void __init init_se7206_IRQ(void) +{ + make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ + make_se7206_irq(IRQ1_IRQ); /* ATA */ + make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ + ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + /* FPGA System register setup*/ + ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ + ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ + ctrl_outw(0x0001,INTSEL); +} + +int se7206_irq_demux(int irq) +{ + return irq; +} diff --git a/arch/sh/boards/se/7206/led.c b/arch/sh/boards/se/7206/led.c new file mode 100644 index 000000000000..ef794601ab86 --- /dev/null +++ b/arch/sh/boards/se/7206/led.c @@ -0,0 +1,57 @@ +/* + * linux/arch/sh/kernel/led_se.c + * + * Copyright (C) 2000 Stuart Menefy + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains Solution Engine specific LED code. + */ + +#include +#include + +#ifdef CONFIG_HEARTBEAT + +#include + +/* Cycle the LED's in the clasic Knightrider/Sun pattern */ +void heartbeat_se(void) +{ + static unsigned int cnt = 0, period = 0; + volatile unsigned short* p = (volatile unsigned short*)PA_LED; + static unsigned bit = 0, up = 1; + + cnt += 1; + if (cnt < period) { + return; + } + + cnt = 0; + + /* Go through the points (roughly!): + * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110 + */ + period = 110 - ( (300< +#include +#include +#include +#include + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x300, + .end = 0x300 + 0x020 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init se7206_devices_setup(void) +{ + return platform_device_register(&smc91x_device); +} + +__initcall(se7206_devices_setup); + +void heartbeat_se(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 256, + .mv_inb = se7206_inb, + .mv_inw = se7206_inw, + .mv_inl = se7206_inl, + .mv_outb = se7206_outb, + .mv_outw = se7206_outw, + .mv_outl = se7206_outl, + + .mv_inb_p = se7206_inb_p, + .mv_inw_p = se7206_inw, + .mv_inl_p = se7206_inl, + .mv_outb_p = se7206_outb_p, + .mv_outw_p = se7206_outw, + .mv_outl_p = se7206_outl, + + .mv_insb = se7206_insb, + .mv_insw = se7206_insw, + .mv_insl = se7206_insl, + .mv_outsb = se7206_outsb, + .mv_outsw = se7206_outsw, + .mv_outsl = se7206_outsl, + + .mv_init_irq = init_se7206_IRQ, + .mv_irq_demux = se7206_irq_demux, +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = heartbeat_se, +#endif +}; +ALIAS_MV(se) diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile new file mode 100644 index 000000000000..3666eca8a658 --- /dev/null +++ b/arch/sh/boards/se/7619/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the 7619 SolutionEngine specific parts of the kernel +# + +obj-y := setup.o io.o diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c new file mode 100644 index 000000000000..176f1f39cd9d --- /dev/null +++ b/arch/sh/boards/se/7619/io.c @@ -0,0 +1,102 @@ +/* + * + * linux/arch/sh/boards/se/7619/io.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * I/O routine for Hitachi 7619 SolutionEngine. + * + */ + +#include +#include +#include +#include +#include + +/* FIXME: M3A-ZAB7 Compact Flash Slot support */ + +static inline void delay(void) +{ + ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */ +} + +#define badio(name,port) \ + printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \ + #name, (port), (__u32) __builtin_return_address(0)) + +unsigned char se7619___inb(unsigned long port) +{ + badio(inb, port); + return 0; +} + +unsigned char se7619___inb_p(unsigned long port) +{ + badio(inb_p, port); + delay(); + return 0; +} + +unsigned short se7619___inw(unsigned long port) +{ + badio(inw, port); + return 0; +} + +unsigned int se7619___inl(unsigned long port) +{ + badio(inl, port); + return 0; +} + +void se7619___outb(unsigned char value, unsigned long port) +{ + badio(outb, port); +} + +void se7619___outb_p(unsigned char value, unsigned long port) +{ + badio(outb_p, port); + delay(); +} + +void se7619___outw(unsigned short value, unsigned long port) +{ + badio(outw, port); +} + +void se7619___outl(unsigned int value, unsigned long port) +{ + badio(outl, port); +} + +void se7619___insb(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insw(unsigned long port, void *addr, unsigned long count) +{ + badio(inw, port); +} + +void se7619___insl(unsigned long port, void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsb(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsw(unsigned long port, const void *addr, unsigned long count) +{ + badio(insl, port); +} + +void se7619___outsl(unsigned long port, const void *addr, unsigned long count) +{ + badio(outsw, port); +} diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c new file mode 100644 index 000000000000..e627b26de0d0 --- /dev/null +++ b/arch/sh/boards/se/7619/setup.c @@ -0,0 +1,43 @@ +/* + * arch/sh/boards/se/7619/setup.c + * + * Copyright (C) 2006 Yoshinori Sato + * + * Hitachi SH7619 SolutionEngine Support. + */ + +#include +#include +#include +#include +#include + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_se __initmv = { + .mv_name = "SolutionEngine", + .mv_nr_irqs = 108, + .mv_inb = se7619___inb, + .mv_inw = se7619___inw, + .mv_inl = se7619___inl, + .mv_outb = se7619___outb, + .mv_outw = se7619___outw, + .mv_outl = se7619___outl, + + .mv_inb_p = se7619___inb_p, + .mv_inw_p = se7619___inw, + .mv_inl_p = se7619___inl, + .mv_outb_p = se7619___outb_p, + .mv_outw_p = se7619___outw, + .mv_outl_p = se7619___outl, + + .mv_insb = se7619___insb, + .mv_insw = se7619___insw, + .mv_insl = se7619___insl, + .mv_outsb = se7619___outsb, + .mv_outsw = se7619___outsw, + .mv_outsl = se7619___outsl, +}; +ALIAS_MV(se) diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig new file mode 100644 index 000000000000..36cec0b6e7c1 --- /dev/null +++ b/arch/sh/configs/se7206_defconfig @@ -0,0 +1,826 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc4 +# Sun Nov 5 16:20:10 2006 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +# CONFIG_SH_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +# CONFIG_SH_7300_SOLUTION_ENGINE is not set +# CONFIG_SH_7343_SOLUTION_ENGINE is not set +# CONFIG_SH_73180_SOLUTION_ENGINE is not set +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_HP6XX is not set +# CONFIG_SH_EC3104 is not set +# CONFIG_SH_SATURN is not set +# CONFIG_SH_DREAMCAST is not set +# CONFIG_SH_BIGSUR is not set +# CONFIG_SH_MPC1211 is not set +# CONFIG_SH_SH03 is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +# CONFIG_SH_7710VOIPGW is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_R7780RP is not set +# CONFIG_SH_EDOSK7705 is not set +# CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_SHMIN is not set +CONFIG_SH_7206_SOLUTION_ENGINE=y +# CONFIG_SH_7619_SOLUTION_ENGINE is not set +# CONFIG_SH_UNKNOWN is not set + +# +# Processor selection +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y + +# +# SH-2 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +CONFIG_CPU_SUBTYPE_SH7206=y + +# +# SH-3 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set + +# +# SH-4 Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# SH4AL-DSP Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set + +# +# Memory management options +# +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_SH_FPU is not set +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set + +# +# Timer support +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_CLK_MD=6 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# +# CONFIG_HD6446X_SERIES is not set + +# +# Kernel features +# +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_KEXEC is not set +# CONFIG_SMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +# CONFIG_SYSFS is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y -- cgit v1.2.3 From 710ee0cc45d095f7697821b330a3f8280205c2be Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sun, 5 Nov 2006 16:48:42 +0900 Subject: sh: SE7206 build fixes. A number of API changes happened underneath the 7206 patches, update for everything that broke. Signed-off-by: Paul Mundt --- arch/sh/boards/se/7206/irq.c | 44 +++++++------------------- arch/sh/boards/se/7206/setup.c | 3 +- arch/sh/kernel/sys_sh.c | 2 ++ arch/sh/kernel/timers/timer-cmt.c | 63 +++----------------------------------- arch/sh/kernel/timers/timer-mtu2.c | 62 +++---------------------------------- arch/sh/kernel/traps.c | 12 ++++++-- include/asm-sh/cpu-sh2/timer.h | 6 ++++ include/asm-sh/se7206.h | 13 ++++++++ include/asm-sh/timer.h | 2 +- 9 files changed, 54 insertions(+), 153 deletions(-) create mode 100644 include/asm-sh/cpu-sh2/timer.h create mode 100644 include/asm-sh/se7206.h (limited to 'arch') diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c index 8d5b278a124d..3fb0c5f5b23a 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/se/7206/irq.c @@ -6,12 +6,10 @@ * Hitachi SolutionEngine Support. * */ - -#include #include #include -#include -#include +#include +#include #include #define INTSTS0 0x31800000 @@ -20,9 +18,6 @@ #define INTMSK1 0x31800006 #define INTSEL 0x31800008 -/* shutdown is same as "disable" */ -#define shutdown_se7206_irq disable_se7206_irq - static void disable_se7206_irq(unsigned int irq) { unsigned short val; @@ -84,18 +79,7 @@ static void enable_se7206_irq(unsigned int irq) ctrl_outw(msk1, INTMSK1); } -static unsigned int startup_se7206_irq(unsigned int irq) -{ - enable_se7206_irq(irq); - return 0; /* never anything pending */ -} - -static void ack_se7206_irq(unsigned int irq) -{ - disable_se7206_irq(irq); -} - -static void end_se7206_irq(unsigned int irq) +static void eoi_se7206_irq(unsigned int irq) { unsigned short sts0,sts1; @@ -121,20 +105,19 @@ static void end_se7206_irq(unsigned int irq) ctrl_outw(sts1, INTSTS1); } -static struct hw_interrupt_type se7206_irq_type = { - .typename = "SE7206 FPGA-IRQ", - .startup = startup_se7206_irq, - .shutdown = shutdown_se7206_irq, - .enable = enable_se7206_irq, - .disable = disable_se7206_irq, - .ack = ack_se7206_irq, - .end = end_se7206_irq, +static struct irq_chip se7206_irq_chip __read_mostly = { + .name = "SE7206-FPGA-IRQ", + .mask = disable_se7206_irq, + .unmask = enable_se7206_irq, + .mask_ack = disable_se7206_irq, + .eoi = eoi_se7206_irq, }; static void make_se7206_irq(unsigned int irq) { disable_irq_nosync(irq); - irq_desc[irq].handler = &se7206_irq_type; + set_irq_chip_and_handler_name(irq, &se7206_irq_chip, + handle_level_irq, "level"); disable_se7206_irq(irq); } @@ -154,8 +137,3 @@ void __init init_se7206_IRQ(void) /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ ctrl_outw(0x0001,INTSEL); } - -int se7206_irq_demux(int irq) -{ - return irq; -} diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index e543e3980c08..0f42e91a3238 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -10,8 +10,8 @@ #include #include -#include #include +#include #include static struct resource smc91x_resources[] = { @@ -72,7 +72,6 @@ struct sh_machine_vector mv_se __initmv = { .mv_outsl = se7206_outsl, .mv_init_irq = init_se7206_IRQ, - .mv_irq_demux = se7206_irq_demux, #ifdef CONFIG_HEARTBEAT .mv_heartbeat = heartbeat_se, #endif diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 8fde95001c34..07f2b5718938 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -50,6 +50,7 @@ unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ EXPORT_SYMBOL(shm_align_mask); +#ifdef CONFIG_MMU /* * To avoid cache aliases, we map the shared page with same color. */ @@ -135,6 +136,7 @@ full_search: addr = COLOUR_ALIGN(addr, pgoff); } } +#endif /* CONFIG_MMU */ static inline long do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 9eab395cd341..30687383d4b0 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -96,8 +96,7 @@ static unsigned long cmt_timer_get_offset(void) return count; } -static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) { unsigned long timer_status; @@ -114,7 +113,7 @@ static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id, * locally disabled. -arca */ write_seqlock(&xtime_lock); - handle_timer_tick(regs); + handle_timer_tick(); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -123,62 +122,10 @@ static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id, static struct irqaction cmt_irq = { .name = "timer", .handler = cmt_timer_interrupt, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, }; -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned long cmt_timer_get_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - - ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); - ctrl_outw(CMT_CMCSR_CALIB, CMT_CMCSR_0); - ctrl_outw(0xffff, CMT_CMCOR_0); - ctrl_outw(0xffff, CMT_CMCNT_0); - - rtc_sh_get_time(&ts2); - - do { - rtc_sh_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); - - do { - rtc_sh_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = 0xffff - ctrl_inw(CMT_CMCNT_0); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - static void cmt_clk_init(struct clk *clk) { u8 divisor = CMT_CMCSR_INIT & 0x3; @@ -245,12 +192,12 @@ struct sys_timer_ops cmt_timer_ops = { .init = cmt_timer_init, .start = cmt_timer_start, .stop = cmt_timer_stop, - .get_frequency = cmt_timer_get_frequency, +#ifndef CONFIG_GENERIC_TIME .get_offset = cmt_timer_get_offset, +#endif }; struct sys_timer cmt_timer = { .name = "cmt", .ops = &cmt_timer_ops, }; - diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index 73a5ef3c457d..045b2aba13fa 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -98,8 +98,7 @@ static unsigned long mtu2_timer_get_offset(void) return count; } -static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id) { unsigned long timer_status; @@ -110,7 +109,7 @@ static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id, /* Do timer tick */ write_seqlock(&xtime_lock); - handle_timer_tick(regs); + handle_timer_tick(); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -119,62 +118,10 @@ static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id, static struct irqaction mtu2_irq = { .name = "timer", .handler = mtu2_timer_interrupt, - .flags = SA_INTERRUPT, + .flags = IRQF_DISABLED, .mask = CPU_MASK_NONE, }; -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned long mtu2_timer_get_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - - ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR); - ctrl_outb(MTU2_TCR_CALIB, MTU2_TCR_1); - ctrl_outb(ctrl_inb(MTU2_TIER_1) & ~MTU2_TIER_TGIEA, MTU2_TIER_1); - ctrl_outw(0, MTU2_TCNT_1); - - rtc_get_time(&ts2); - - do { - rtc_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); - - do { - rtc_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = ctrl_inw(MTU2_TCNT_0); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 }; static void mtu2_clk_init(struct clk *clk) @@ -250,8 +197,9 @@ struct sys_timer_ops mtu2_timer_ops = { .init = mtu2_timer_init, .start = mtu2_timer_start, .stop = mtu2_timer_stop, - .get_frequency = mtu2_timer_get_frequency, +#ifndef CONFIG_GENERIC_TIME .get_offset = mtu2_timer_get_offset, +#endif }; struct sys_timer mtu2_timer = { diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 1edec2709efe..f558748d7543 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -107,8 +107,6 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs, die(str, regs, err); } -static int handle_unaligned_notify_count = 10; - /* * try and fix up kernelspace address errors * - userspace errors just cause EFAULT to be returned, resulting in SEGV @@ -347,6 +345,13 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs) #define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4) #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4) +/* + * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit + * opcodes.. + */ +#ifndef CONFIG_CPU_SH2A +static int handle_unaligned_notify_count = 10; + static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) { u_int rm; @@ -483,6 +488,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) regs->pc += 2; return ret; } +#endif /* CONFIG_CPU_SH2A */ #ifdef CONFIG_CPU_HAS_SR_RB #define lookup_exception_vector(x) \ @@ -501,8 +507,10 @@ asmlinkage void do_address_error(struct pt_regs *regs, { unsigned long error_code = 0; mm_segment_t oldfs; +#ifndef CONFIG_CPU_SH2A u16 instruction; int tmp; +#endif /* Intentional ifdef */ #ifdef CONFIG_CPU_HAS_SR_RB diff --git a/include/asm-sh/cpu-sh2/timer.h b/include/asm-sh/cpu-sh2/timer.h new file mode 100644 index 000000000000..a39c241e8195 --- /dev/null +++ b/include/asm-sh/cpu-sh2/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/include/asm-sh/se7206.h b/include/asm-sh/se7206.h new file mode 100644 index 000000000000..698eb80389ab --- /dev/null +++ b/include/asm-sh/se7206.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_SE7206_H +#define __ASM_SH_SE7206_H + +#define PA_SMSC 0x30000000 +#define PA_MRSHPC 0x34000000 +#define PA_LED 0x31400000 + +void init_se7206_IRQ(void); + +#define __IO_PREFIX se7206 +#include + +#endif /* __ASM_SH_SE7206_H */ diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index 5df842bcf7b6..5a014bca9d58 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -22,7 +22,7 @@ struct sys_timer { #define TICK_SIZE (tick_nsec / 1000) -extern struct sys_timer tmu_timer; +extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; extern struct sys_timer *sys_timer; #ifndef CONFIG_GENERIC_TIME -- cgit v1.2.3 From 716067f28931d46b9f460acbeae1478a337e58ec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 7 Nov 2006 10:29:23 +0000 Subject: sh: Fixup entry-common path breakage for SH-3. The nommu patches broke the path for the common bits, get it building for the SH-3/4 case again. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 8bcd63f9f351..869d56fb7d63 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -323,7 +323,7 @@ skip_restore: 7: .long 0x30000000 ! common exception handler -#include "../../entry.S" +#include "../../entry-common.S" ! Exception Vector Base ! -- cgit v1.2.3 From 417528a2e35f46bc42721de5c4efd33a0eba019d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Nov 2006 11:18:30 +0900 Subject: sh: Configurable timer IRQ. All of the various CPU subtypes currently hardcode TIMER_IRQ, switch this to a config option in the few places we need this. This allows further removal of hardcoded IRQ headers.. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 +++++++ arch/sh/kernel/cpu/sh4/setup-sh7780.c | 2 +- arch/sh/kernel/timers/timer-cmt.c | 2 +- arch/sh/kernel/timers/timer-mtu2.c | 2 +- arch/sh/kernel/timers/timer-tmu.c | 2 +- 5 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ba7a15016307..b95dbb8db661 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -405,6 +405,13 @@ source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +config SH_TIMER_IRQ + int + default "28" if CPU_SUBTYPE_SH7780 + default "86" if CPU_SUBTYPE_SH7619 + default "140" if CPU_SUBTYPE_SH7206 + default "16" + config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c index 814ddb226531..4a2b9e01b91f 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -79,7 +79,7 @@ static int __init sh7780_devices_setup(void) __initcall(sh7780_devices_setup); static struct intc2_data intc2_irq_table[] = { - { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2 }, + { 28, 0, 24, 0, INTC_TMU0_MSK, 2 }, { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 30687383d4b0..24b03996da51 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -169,7 +169,7 @@ static int cmt_timer_init(void) cmt_clock_enable(); - setup_irq(TIMER_IRQ, &cmt_irq); + setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); cmt0_clk.parent = clk_get("module_clk"); diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index 045b2aba13fa..92c98b5b11ea 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -167,7 +167,7 @@ static int mtu2_timer_init(void) u8 tmp; unsigned long interval; - setup_irq(TIMER_IRQ, &mtu2_irq); + setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq); mtu2_clk1.parent = clk_get("module_clk"); diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 24927015dc31..06a70db7386d 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -149,7 +149,7 @@ static int tmu_timer_init(void) { unsigned long interval; - setup_irq(TIMER_IRQ, &tmu_irq); + setup_irq(CONFIG_SH_TIMER_IRQ, &tmu_irq); tmu0_clk.parent = clk_get("module_clk"); -- cgit v1.2.3 From 9a7ef6d59f9d4780ff5bc9c4d05266b52dcb9211 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Nov 2006 13:55:34 +0900 Subject: sh: Drop CPU subtype IRQ headers. This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/irq.c | 1 + arch/sh/drivers/pci/pci-sh7780.c | 14 + arch/sh/kernel/cpu/irq/intc2.c | 25 +- arch/sh/kernel/cpu/irq/ipr.c | 6 +- arch/sh/kernel/cpu/sh4/setup-sh7780.c | 36 +- include/asm-sh/cpu-sh2/irq.h | 84 ----- include/asm-sh/cpu-sh2a/irq.h | 75 ---- include/asm-sh/irq-sh73180.h | 314 ---------------- include/asm-sh/irq-sh7343.h | 317 ---------------- include/asm-sh/irq-sh7780.h | 311 ---------------- include/asm-sh/irq.h | 654 +--------------------------------- 11 files changed, 52 insertions(+), 1785 deletions(-) delete mode 100644 include/asm-sh/cpu-sh2/irq.h delete mode 100644 include/asm-sh/cpu-sh2a/irq.h delete mode 100644 include/asm-sh/irq-sh73180.h delete mode 100644 include/asm-sh/irq-sh7343.h delete mode 100644 include/asm-sh/irq-sh7780.h (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c index aa15ec5bc69e..cc381e197783 100644 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -10,6 +10,7 @@ */ #include #include +#include #include #include diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index d6e635296534..602b644c35ad 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,6 +22,20 @@ #include #include "pci-sh4.h" +#define INTC_BASE 0xffd00000 +#define INTC_ICR0 (INTC_BASE+0x0) +#define INTC_ICR1 (INTC_BASE+0x1c) +#define INTC_INTPRI (INTC_BASE+0x10) +#define INTC_INTREQ (INTC_BASE+0x24) +#define INTC_INTMSK0 (INTC_BASE+0x44) +#define INTC_INTMSK1 (INTC_BASE+0x48) +#define INTC_INTMSK2 (INTC_BASE+0x40080) +#define INTC_INTMSKCLR0 (INTC_BASE+0x64) +#define INTC_INTMSKCLR1 (INTC_BASE+0x68) +#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) +#define INTC_INT2MSKR (INTC_BASE+0x40038) +#define INTC_INT2MSKCR (INTC_BASE+0x4003c) + /* * Initialization. Try all known PCI access methods. Note that we support * using both PCI BIOS and direct access: in such cases, we use I/O ports diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index 74ca576a7ce5..74defe76a058 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -11,22 +11,29 @@ * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. */ #include -#include +#include #include -#include + +#if defined(CONFIG_CPU_SUBTYPE_SH7760) +#define INTC2_BASE 0xfe080000 +#define INTC2_INTMSK (INTC2_BASE + 0x40) +#define INTC2_INTMSKCLR (INTC2_BASE + 0x60) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#define INTC2_BASE 0xffd40000 +#define INTC2_INTMSK (INTC2_BASE + 0x38) +#define INTC2_INTMSKCLR (INTC2_BASE + 0x3c) +#endif static void disable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, - INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset); + ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset); } static void enable_intc2_irq(unsigned int irq) { struct intc2_data *p = get_irq_chip_data(irq); - ctrl_outl(1 << p->msk_shift, - INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset); + ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset); } static struct irq_chip intc2_irq_chip = { @@ -61,12 +68,10 @@ void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) /* Set the priority level */ local_irq_save(flags); - ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + - p->ipr_offset); + ipr = ctrl_inl(INTC2_BASE + p->ipr_offset); ipr &= ~(0xf << p->ipr_shift); ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + - p->ipr_offset); + ctrl_outl(ipr, INTC2_BASE + p->ipr_offset); local_irq_restore(flags); diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index f7a2bae1df94..a181ccdf2906 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -19,10 +19,8 @@ #include #include #include -#include -#include -#include - +#include +#include static void disable_ipr_irq(unsigned int irq) { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c index 4a2b9e01b91f..9aeaa2ddaa28 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -79,25 +79,27 @@ static int __init sh7780_devices_setup(void) __initcall(sh7780_devices_setup); static struct intc2_data intc2_irq_table[] = { - { 28, 0, 24, 0, INTC_TMU0_MSK, 2 }, - { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { 28, 0, 24, 0, 0, 2 }, /* TMU0 */ - { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { 21, 1, 0, 0, 2, 2 }, + { 22, 1, 1, 0, 2, 2 }, + { 23, 1, 2, 0, 2, 2 }, - { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, - { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, - { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, - { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, - { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, + { 40, 8, 24, 0, 3, 3 }, /* SCIF0 ERI */ + { 41, 8, 24, 0, 3, 3 }, /* SCIF0 RXI */ + { 42, 8, 24, 0, 3, 3 }, /* SCIF0 BRI */ + { 43, 8, 24, 0, 3, 3 }, /* SCIF0 TXI */ + + { 76, 8, 16, 0, 4, 3 }, /* SCIF1 ERI */ + { 77, 8, 16, 0, 4, 3 }, /* SCIF1 RXI */ + { 78, 8, 16, 0, 4, 3 }, /* SCIF1 BRI */ + { 79, 8, 16, 0, 4, 3 }, /* SCIF1 TXI */ + + { 64, 0x10, 8, 0, 14, 2 }, /* PCIC0 */ + { 65, 0x10, 0, 0, 15, 2 }, /* PCIC1 */ + { 66, 0x14, 24, 0, 16, 2 }, /* PCIC2 */ + { 67, 0x14, 16, 0, 17, 2 }, /* PCIC3 */ + { 68, 0x14, 8, 0, 18, 2 }, /* PCIC4 */ }; void __init init_IRQ_intc2(void) diff --git a/include/asm-sh/cpu-sh2/irq.h b/include/asm-sh/cpu-sh2/irq.h deleted file mode 100644 index 4032a14d0f41..000000000000 --- a/include/asm-sh/cpu-sh2/irq.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2_IRQ_H -#define __ASM_SH_CPU_SH2_IRQ_H - -/* - * - * linux/include/asm-sh/cpu-sh2/irq.h - * - * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Paul Mundt - * - */ - -#include - -#if defined(CONFIG_CPU_SUBTYPE_SH7044) -#define INTC_IPRA 0xffff8348UL -#define INTC_IPRB 0xffff834aUL -#define INTC_IPRC 0xffff834cUL -#define INTC_IPRD 0xffff834eUL -#define INTC_IPRE 0xffff8350UL -#define INTC_IPRF 0xffff8352UL -#define INTC_IPRG 0xffff8354UL -#define INTC_IPRH 0xffff8356UL - -#define INTC_ICR 0xffff8358UL -#define INTC_ISR 0xffff835aUL -#elif defined(CONFIG_CPU_SUBTYPE_SH7604) -#define INTC_IPRA 0xfffffee2UL -#define INTC_IPRB 0xfffffe60UL - -#define INTC_VCRA 0xfffffe62UL -#define INTC_VCRB 0xfffffe64UL -#define INTC_VCRC 0xfffffe66UL -#define INTC_VCRD 0xfffffe68UL - -#define INTC_VCRWDT 0xfffffee4UL -#define INTC_VCRDIV 0xffffff0cUL -#define INTC_VCRDMA0 0xffffffa0UL -#define INTC_VCRDMA1 0xffffffa8UL - -#define INTC_ICR 0xfffffee0UL -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -#define INTC_IPRA 0xf8140006UL -#define INTC_IPRB 0xf8140008UL -#define INTC_IPRC 0xf8080000UL -#define INTC_IPRD 0xf8080002UL -#define INTC_IPRE 0xf8080004UL -#define INTC_IPRF 0xf8080006UL -#define INTC_IPRG 0xf8080008UL - -#define INTC_ICR0 0xf8140000UL -#define INTC_IRQCR 0xf8140002UL -#define INTC_IRQSR 0xf8140004UL - -#define CMI0_IRQ 86 -#define CMI1_IRQ 87 - -#define SCIF_ERI_IRQ 88 -#define SCIF_RXI_IRQ 89 -#define SCIF_BRI_IRQ 90 -#define SCIF_TXI_IRQ 91 -#define SCIF_IPR_ADDR INTC_IPRD -#define SCIF_IPR_POS 3 -#define SCIF_PRIORITY 3 - -#define SCIF1_ERI_IRQ 92 -#define SCIF1_RXI_IRQ 93 -#define SCIF1_BRI_IRQ 94 -#define SCIF1_TXI_IRQ 95 -#define SCIF1_IPR_ADDR INTC_IPRD -#define SCIF1_IPR_POS 2 -#define SCIF1_PRIORITY 3 - -#define SCIF2_BRI_IRQ 96 -#define SCIF2_RXI_IRQ 97 -#define SCIF2_ERI_IRQ 98 -#define SCIF2_TXI_IRQ 99 -#define SCIF2_IPR_ADDR INTC_IPRD -#define SCIF2_IPR_POS 1 -#define SCIF2_PRIORITY 3 -#endif - -#endif /* __ASM_SH_CPU_SH2_IRQ_H */ diff --git a/include/asm-sh/cpu-sh2a/irq.h b/include/asm-sh/cpu-sh2a/irq.h deleted file mode 100644 index d3d42f64148c..000000000000 --- a/include/asm-sh/cpu-sh2a/irq.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_IRQ_H -#define __ASM_SH_CPU_SH2A_IRQ_H - -#define INTC_IPR01 0xfffe0818UL -#define INTC_IPR02 0xfffe081aUL -#define INTC_IPR05 0xfffe0820UL -#define INTC_IPR06 0xfffe0c00UL -#define INTC_IPR07 0xfffe0c02UL -#define INTC_IPR08 0xfffe0c04UL -#define INTC_IPR09 0xfffe0c06UL -#define INTC_IPR10 0xfffe0c08UL -#define INTC_IPR11 0xfffe0c0aUL -#define INTC_IPR12 0xfffe0c0cUL -#define INTC_IPR13 0xfffe0c0eUL -#define INTC_IPR14 0xfffe0c10UL - -#define INTC_ICR0 0xfffe0800UL -#define INTC_ICR1 0xfffe0802UL -#define INTC_ICR2 0xfffe0804UL -#define INTC_ISR 0xfffe0806UL - -#define IRQ0_IRQ 64 -#define IRQ1_IRQ 65 -#define IRQ2_IRQ 66 -#define IRQ3_IRQ 67 -#define IRQ4_IRQ 68 -#define IRQ5_IRQ 69 -#define IRQ6_IRQ 70 -#define IRQ7_IRQ 71 - -#define PINT0_IRQ 80 -#define PINT1_IRQ 81 -#define PINT2_IRQ 82 -#define PINT3_IRQ 83 -#define PINT4_IRQ 84 -#define PINT5_IRQ 85 -#define PINT6_IRQ 86 -#define PINT7_IRQ 87 - -#define CMI0_IRQ 140 -#define CMI1_IRQ 141 - -#define SCIF_BRI_IRQ 240 -#define SCIF_ERI_IRQ 241 -#define SCIF_RXI_IRQ 242 -#define SCIF_TXI_IRQ 243 -#define SCIF_IPR_ADDR INTC_IPR14 -#define SCIF_IPR_POS 3 -#define SCIF_PRIORITY 3 - -#define SCIF1_BRI_IRQ 244 -#define SCIF1_ERI_IRQ 245 -#define SCIF1_RXI_IRQ 246 -#define SCIF1_TXI_IRQ 247 -#define SCIF1_IPR_ADDR INTC_IPR14 -#define SCIF1_IPR_POS 2 -#define SCIF1_PRIORITY 3 - -#define SCIF2_BRI_IRQ 248 -#define SCIF2_ERI_IRQ 249 -#define SCIF2_RXI_IRQ 250 -#define SCIF2_TXI_IRQ 251 -#define SCIF2_IPR_ADDR INTC_IPR14 -#define SCIF2_IPR_POS 1 -#define SCIF2_PRIORITY 3 - -#define SCIF3_BRI_IRQ 252 -#define SCIF3_ERI_IRQ 253 -#define SCIF3_RXI_IRQ 254 -#define SCIF3_TXI_IRQ 255 -#define SCIF3_IPR_ADDR INTC_IPR14 -#define SCIF3_IPR_POS 0 -#define SCIF3_PRIORITY 3 - -#endif /* __ASM_SH_CPU_SH2A_IRQ_H */ diff --git a/include/asm-sh/irq-sh73180.h b/include/asm-sh/irq-sh73180.h deleted file mode 100644 index b28af9a69d72..000000000000 --- a/include/asm-sh/irq-sh73180.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef __ASM_SH_IRQ_SH73180_H -#define __ASM_SH_IRQ_SH73180_H - -/* - * linux/include/asm-sh/irq-sh73180.h - * - * Copyright (C) 2004 Takashi SHUDO - */ - -#undef INTC_IPRA -#undef INTC_IPRB -#undef INTC_IPRC -#undef INTC_IPRD - -#undef DMTE0_IRQ -#undef DMTE1_IRQ -#undef DMTE2_IRQ -#undef DMTE3_IRQ -#undef DMTE4_IRQ -#undef DMTE5_IRQ -#undef DMTE6_IRQ -#undef DMTE7_IRQ -#undef DMAE_IRQ -#undef DMA_IPR_ADDR -#undef DMA_IPR_POS -#undef DMA_PRIORITY - -#undef INTC_IMCR0 -#undef INTC_IMCR1 -#undef INTC_IMCR2 -#undef INTC_IMCR3 -#undef INTC_IMCR4 -#undef INTC_IMCR5 -#undef INTC_IMCR6 -#undef INTC_IMCR7 -#undef INTC_IMCR8 -#undef INTC_IMCR9 -#undef INTC_IMCR10 - - -#define INTC_IPRA 0xA4080000UL -#define INTC_IPRB 0xA4080004UL -#define INTC_IPRC 0xA4080008UL -#define INTC_IPRD 0xA408000CUL -#define INTC_IPRE 0xA4080010UL -#define INTC_IPRF 0xA4080014UL -#define INTC_IPRG 0xA4080018UL -#define INTC_IPRH 0xA408001CUL -#define INTC_IPRI 0xA4080020UL -#define INTC_IPRJ 0xA4080024UL -#define INTC_IPRK 0xA4080028UL - -#define INTC_IMR0 0xA4080080UL -#define INTC_IMR1 0xA4080084UL -#define INTC_IMR2 0xA4080088UL -#define INTC_IMR3 0xA408008CUL -#define INTC_IMR4 0xA4080090UL -#define INTC_IMR5 0xA4080094UL -#define INTC_IMR6 0xA4080098UL -#define INTC_IMR7 0xA408009CUL -#define INTC_IMR8 0xA40800A0UL -#define INTC_IMR9 0xA40800A4UL -#define INTC_IMR10 0xA40800A8UL -#define INTC_IMR11 0xA40800ACUL - -#define INTC_IMCR0 0xA40800C0UL -#define INTC_IMCR1 0xA40800C4UL -#define INTC_IMCR2 0xA40800C8UL -#define INTC_IMCR3 0xA40800CCUL -#define INTC_IMCR4 0xA40800D0UL -#define INTC_IMCR5 0xA40800D4UL -#define INTC_IMCR6 0xA40800D8UL -#define INTC_IMCR7 0xA40800DCUL -#define INTC_IMCR8 0xA40800E0UL -#define INTC_IMCR9 0xA40800E4UL -#define INTC_IMCR10 0xA40800E8UL -#define INTC_IMCR11 0xA40800ECUL - -#define INTC_ICR0 0xA4140000UL -#define INTC_ICR1 0xA414001CUL - -#define INTMSK0 0xa4140044 -#define INTMSKCLR0 0xa4140064 -#define INTC_INTPRI0 0xa4140010 - -/* - NOTE: - - *_IRQ = (INTEVT2 - 0x200)/0x20 -*/ - -/* TMU0 */ -#define TMU0_IRQ 16 -#define TMU0_IPR_ADDR INTC_IPRA -#define TMU0_IPR_POS 3 -#define TMU0_PRIORITY 2 - -#define TIMER_IRQ 16 -#define TIMER_IPR_ADDR INTC_IPRA -#define TIMER_IPR_POS 3 -#define TIMER_PRIORITY 2 - -/* TMU1 */ -#define TMU1_IRQ 17 -#define TMU1_IPR_ADDR INTC_IPRA -#define TMU1_IPR_POS 2 -#define TMU1_PRIORITY 2 - -/* TMU2 */ -#define TMU2_IRQ 18 -#define TMU2_IPR_ADDR INTC_IPRA -#define TMU2_IPR_POS 1 -#define TMU2_PRIORITY 2 - -/* LCDC */ -#define LCDC_IRQ 28 -#define LCDC_IPR_ADDR INTC_IPRB -#define LCDC_IPR_POS 2 -#define LCDC_PRIORITY 2 - -/* VIO (Video I/O) */ -#define CEU_IRQ 52 -#define BEU_IRQ 53 -#define VEU_IRQ 54 -#define VOU_IRQ 55 -#define VIO_IPR_ADDR INTC_IPRE -#define VIO_IPR_POS 2 -#define VIO_PRIORITY 2 - -/* MFI (Multi Functional Interface) */ -#define MFI_IRQ 56 -#define MFI_IPR_ADDR INTC_IPRE -#define MFI_IPR_POS 1 -#define MFI_PRIORITY 2 - -/* VPU (Video Processing Unit) */ -#define VPU_IRQ 60 -#define VPU_IPR_ADDR INTC_IPRE -#define VPU_IPR_POS 0 -#define VPU_PRIORITY 2 - -/* 3DG */ -#define TDG_IRQ 63 -#define TDG_IPR_ADDR INTC_IPRJ -#define TDG_IPR_POS 2 -#define TDG_PRIORITY 2 - -/* DMAC(1) */ -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMA1_IPR_ADDR INTC_IPRE -#define DMA1_IPR_POS 3 -#define DMA1_PRIORITY 7 - -/* DMAC(2) */ -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#define DMA2_IPR_ADDR INTC_IPRF -#define DMA2_IPR_POS 2 -#define DMA2_PRIORITY 7 - -/* SCIF0 */ -#define SCIF_ERI_IRQ 80 -#define SCIF_RXI_IRQ 81 -#define SCIF_BRI_IRQ 82 -#define SCIF_TXI_IRQ 83 -#define SCIF_IPR_ADDR INTC_IPRG -#define SCIF_IPR_POS 3 -#define SCIF_PRIORITY 3 - -/* SIOF0 */ -#define SIOF0_IRQ 84 -#define SIOF0_IPR_ADDR INTC_IPRH -#define SIOF0_IPR_POS 3 -#define SIOF0_PRIORITY 3 - -/* FLCTL (Flash Memory Controller) */ -#define FLSTE_IRQ 92 -#define FLTEND_IRQ 93 -#define FLTRQ0_IRQ 94 -#define FLTRQ1_IRQ 95 -#define FLCTL_IPR_ADDR INTC_IPRH -#define FLCTL_IPR_POS 1 -#define FLCTL_PRIORITY 3 - -/* IIC(0) (IIC Bus Interface) */ -#define IIC0_ALI_IRQ 96 -#define IIC0_TACKI_IRQ 97 -#define IIC0_WAITI_IRQ 98 -#define IIC0_DTEI_IRQ 99 -#define IIC0_IPR_ADDR INTC_IPRH -#define IIC0_IPR_POS 0 -#define IIC0_PRIORITY 3 - -/* IIC(1) (IIC Bus Interface) */ -#define IIC1_ALI_IRQ 44 -#define IIC1_TACKI_IRQ 45 -#define IIC1_WAITI_IRQ 46 -#define IIC1_DTEI_IRQ 47 -#define IIC1_IPR_ADDR INTC_IPRG -#define IIC1_IPR_POS 0 -#define IIC1_PRIORITY 3 - -/* SIO0 */ -#define SIO0_IRQ 88 -#define SIO0_IPR_ADDR INTC_IPRI -#define SIO0_IPR_POS 3 -#define SIO0_PRIORITY 3 - -/* SDHI */ -#define SDHI_SDHII0_IRQ 100 -#define SDHI_SDHII1_IRQ 101 -#define SDHI_SDHII2_IRQ 102 -#define SDHI_SDHII3_IRQ 103 -#define SDHI_IPR_ADDR INTC_IPRK -#define SDHI_IPR_POS 0 -#define SDHI_PRIORITY 3 - -/* SIU (Sound Interface Unit) */ -#define SIU_IRQ 108 -#define SIU_IPR_ADDR INTC_IPRJ -#define SIU_IPR_POS 1 -#define SIU_PRIORITY 3 - -#define PORT_PACR 0xA4050100UL -#define PORT_PBCR 0xA4050102UL -#define PORT_PCCR 0xA4050104UL -#define PORT_PDCR 0xA4050106UL -#define PORT_PECR 0xA4050108UL -#define PORT_PFCR 0xA405010AUL -#define PORT_PGCR 0xA405010CUL -#define PORT_PHCR 0xA405010EUL -#define PORT_PJCR 0xA4050110UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PLCR 0xA4050114UL -#define PORT_SCPCR 0xA4050116UL -#define PORT_PMCR 0xA4050118UL -#define PORT_PNCR 0xA405011AUL -#define PORT_PQCR 0xA405011CUL -#define PORT_PRCR 0xA405011EUL -#define PORT_PTCR 0xA405014CUL -#define PORT_PUCR 0xA405014EUL -#define PORT_PVCR 0xA4050150UL - -#define PORT_PSELA 0xA4050140UL -#define PORT_PSELB 0xA4050142UL -#define PORT_PSELC 0xA4050144UL -#define PORT_PSELE 0xA4050158UL - -#define PORT_HIZCRA 0xA4050146UL -#define PORT_HIZCRB 0xA4050148UL -#define PORT_DRVCR 0xA405014AUL - -#define PORT_PADR 0xA4050120UL -#define PORT_PBDR 0xA4050122UL -#define PORT_PCDR 0xA4050124UL -#define PORT_PDDR 0xA4050126UL -#define PORT_PEDR 0xA4050128UL -#define PORT_PFDR 0xA405012AUL -#define PORT_PGDR 0xA405012CUL -#define PORT_PHDR 0xA405012EUL -#define PORT_PJDR 0xA4050130UL -#define PORT_PKDR 0xA4050132UL -#define PORT_PLDR 0xA4050134UL -#define PORT_SCPDR 0xA4050136UL -#define PORT_PMDR 0xA4050138UL -#define PORT_PNDR 0xA405013AUL -#define PORT_PQDR 0xA405013CUL -#define PORT_PRDR 0xA405013EUL -#define PORT_PTDR 0xA405016CUL -#define PORT_PUDR 0xA405016EUL -#define PORT_PVDR 0xA4050170UL - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ2_IRQ 34 -#define IRQ3_IRQ 35 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 -#define IRQ6_IRQ 38 -#define IRQ7_IRQ 39 - -#define INTPRI00 0xA4140010UL - -#define IRQ0_IPR_ADDR INTPRI00 -#define IRQ1_IPR_ADDR INTPRI00 -#define IRQ2_IPR_ADDR INTPRI00 -#define IRQ3_IPR_ADDR INTPRI00 -#define IRQ4_IPR_ADDR INTPRI00 -#define IRQ5_IPR_ADDR INTPRI00 -#define IRQ6_IPR_ADDR INTPRI00 -#define IRQ7_IPR_ADDR INTPRI00 - -#define IRQ0_IPR_POS 7 -#define IRQ1_IPR_POS 6 -#define IRQ2_IPR_POS 5 -#define IRQ3_IPR_POS 4 -#define IRQ4_IPR_POS 3 -#define IRQ5_IPR_POS 2 -#define IRQ6_IPR_POS 1 -#define IRQ7_IPR_POS 0 - -#define IRQ0_PRIORITY 1 -#define IRQ1_PRIORITY 1 -#define IRQ2_PRIORITY 1 -#define IRQ3_PRIORITY 1 -#define IRQ4_PRIORITY 1 -#define IRQ5_PRIORITY 1 -#define IRQ6_PRIORITY 1 -#define IRQ7_PRIORITY 1 - -#endif /* __ASM_SH_IRQ_SH73180_H */ diff --git a/include/asm-sh/irq-sh7343.h b/include/asm-sh/irq-sh7343.h deleted file mode 100644 index 5d15419b53b0..000000000000 --- a/include/asm-sh/irq-sh7343.h +++ /dev/null @@ -1,317 +0,0 @@ -#ifndef __ASM_SH_IRQ_SH7343_H -#define __ASM_SH_IRQ_SH7343_H - -/* - * linux/include/asm-sh/irq-sh7343.h - * - * Copyright (C) 2006 Kenati Technologies Inc. - * Andre Mccurdy - * Ranjit Deshpande - */ - -#undef INTC_IPRA -#undef INTC_IPRB -#undef INTC_IPRC -#undef INTC_IPRD - -#undef DMTE0_IRQ -#undef DMTE1_IRQ -#undef DMTE2_IRQ -#undef DMTE3_IRQ -#undef DMTE4_IRQ -#undef DMTE5_IRQ -#undef DMTE6_IRQ -#undef DMTE7_IRQ -#undef DMAE_IRQ -#undef DMA_IPR_ADDR -#undef DMA_IPR_POS -#undef DMA_PRIORITY - -#undef INTC_IMCR0 -#undef INTC_IMCR1 -#undef INTC_IMCR2 -#undef INTC_IMCR3 -#undef INTC_IMCR4 -#undef INTC_IMCR5 -#undef INTC_IMCR6 -#undef INTC_IMCR7 -#undef INTC_IMCR8 -#undef INTC_IMCR9 -#undef INTC_IMCR10 - - -#define INTC_IPRA 0xA4080000UL -#define INTC_IPRB 0xA4080004UL -#define INTC_IPRC 0xA4080008UL -#define INTC_IPRD 0xA408000CUL -#define INTC_IPRE 0xA4080010UL -#define INTC_IPRF 0xA4080014UL -#define INTC_IPRG 0xA4080018UL -#define INTC_IPRH 0xA408001CUL -#define INTC_IPRI 0xA4080020UL -#define INTC_IPRJ 0xA4080024UL -#define INTC_IPRK 0xA4080028UL -#define INTC_IPRL 0xA408002CUL - -#define INTC_IMR0 0xA4080080UL -#define INTC_IMR1 0xA4080084UL -#define INTC_IMR2 0xA4080088UL -#define INTC_IMR3 0xA408008CUL -#define INTC_IMR4 0xA4080090UL -#define INTC_IMR5 0xA4080094UL -#define INTC_IMR6 0xA4080098UL -#define INTC_IMR7 0xA408009CUL -#define INTC_IMR8 0xA40800A0UL -#define INTC_IMR9 0xA40800A4UL -#define INTC_IMR10 0xA40800A8UL -#define INTC_IMR11 0xA40800ACUL - -#define INTC_IMCR0 0xA40800C0UL -#define INTC_IMCR1 0xA40800C4UL -#define INTC_IMCR2 0xA40800C8UL -#define INTC_IMCR3 0xA40800CCUL -#define INTC_IMCR4 0xA40800D0UL -#define INTC_IMCR5 0xA40800D4UL -#define INTC_IMCR6 0xA40800D8UL -#define INTC_IMCR7 0xA40800DCUL -#define INTC_IMCR8 0xA40800E0UL -#define INTC_IMCR9 0xA40800E4UL -#define INTC_IMCR10 0xA40800E8UL -#define INTC_IMCR11 0xA40800ECUL - -#define INTC_ICR0 0xA4140000UL -#define INTC_ICR1 0xA414001CUL - -#define INTMSK0 0xa4140044 -#define INTMSKCLR0 0xa4140064 -#define INTC_INTPRI0 0xa4140010 - -/* - NOTE: - - *_IRQ = (INTEVT2 - 0x200)/0x20 -*/ - -/* TMU0 */ -#define TMU0_IRQ 16 -#define TMU0_IPR_ADDR INTC_IPRA -#define TMU0_IPR_POS 3 -#define TMU0_PRIORITY 2 - -#define TIMER_IRQ 16 -#define TIMER_IPR_ADDR INTC_IPRA -#define TIMER_IPR_POS 3 -#define TIMER_PRIORITY 2 - -/* TMU1 */ -#define TMU1_IRQ 17 -#define TMU1_IPR_ADDR INTC_IPRA -#define TMU1_IPR_POS 2 -#define TMU1_PRIORITY 2 - -/* TMU2 */ -#define TMU2_IRQ 18 -#define TMU2_IPR_ADDR INTC_IPRA -#define TMU2_IPR_POS 1 -#define TMU2_PRIORITY 2 - -/* LCDC */ -#define LCDC_IRQ 28 -#define LCDC_IPR_ADDR INTC_IPRB -#define LCDC_IPR_POS 2 -#define LCDC_PRIORITY 2 - -/* VIO (Video I/O) */ -#define CEU_IRQ 52 -#define BEU_IRQ 53 -#define VEU_IRQ 54 -#define VOU_IRQ 55 -#define VIO_IPR_ADDR INTC_IPRE -#define VIO_IPR_POS 2 -#define VIO_PRIORITY 2 - -/* MFI (Multi Functional Interface) */ -#define MFI_IRQ 56 -#define MFI_IPR_ADDR INTC_IPRE -#define MFI_IPR_POS 1 -#define MFI_PRIORITY 2 - -/* VPU (Video Processing Unit) */ -#define VPU_IRQ 60 -#define VPU_IPR_ADDR INTC_IPRE -#define VPU_IPR_POS 0 -#define VPU_PRIORITY 2 - -/* 3DG */ -#define TDG_IRQ 63 -#define TDG_IPR_ADDR INTC_IPRJ -#define TDG_IPR_POS 2 -#define TDG_PRIORITY 2 - -/* DMAC(1) */ -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMA1_IPR_ADDR INTC_IPRE -#define DMA1_IPR_POS 3 -#define DMA1_PRIORITY 7 - -/* DMAC(2) */ -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#define DMA2_IPR_ADDR INTC_IPRF -#define DMA2_IPR_POS 2 -#define DMA2_PRIORITY 7 - -/* SCIF0 */ -#define SCIF_ERI_IRQ 80 -#define SCIF_RXI_IRQ 81 -#define SCIF_BRI_IRQ 82 -#define SCIF_TXI_IRQ 83 -#define SCIF_IPR_ADDR INTC_IPRG -#define SCIF_IPR_POS 3 -#define SCIF_PRIORITY 3 - -/* SIOF0 */ -#define SIOF0_IRQ 84 -#define SIOF0_IPR_ADDR INTC_IPRH -#define SIOF0_IPR_POS 3 -#define SIOF0_PRIORITY 3 - -/* FLCTL (Flash Memory Controller) */ -#define FLSTE_IRQ 92 -#define FLTEND_IRQ 93 -#define FLTRQ0_IRQ 94 -#define FLTRQ1_IRQ 95 -#define FLCTL_IPR_ADDR INTC_IPRH -#define FLCTL_IPR_POS 1 -#define FLCTL_PRIORITY 3 - -/* IIC(0) (IIC Bus Interface) */ -#define IIC0_ALI_IRQ 96 -#define IIC0_TACKI_IRQ 97 -#define IIC0_WAITI_IRQ 98 -#define IIC0_DTEI_IRQ 99 -#define IIC0_IPR_ADDR INTC_IPRH -#define IIC0_IPR_POS 0 -#define IIC0_PRIORITY 3 - -/* IIC(1) (IIC Bus Interface) */ -#define IIC1_ALI_IRQ 44 -#define IIC1_TACKI_IRQ 45 -#define IIC1_WAITI_IRQ 46 -#define IIC1_DTEI_IRQ 47 -#define IIC1_IPR_ADDR INTC_IPRI -#define IIC1_IPR_POS 0 -#define IIC1_PRIORITY 3 - -/* SIO0 */ -#define SIO0_IRQ 88 -#define SIO0_IPR_ADDR INTC_IPRI -#define SIO0_IPR_POS 3 -#define SIO0_PRIORITY 3 - -/* SDHI */ -#define SDHI_SDHII0_IRQ 100 -#define SDHI_SDHII1_IRQ 101 -#define SDHI_SDHII2_IRQ 102 -#define SDHI_SDHII3_IRQ 103 -#define SDHI_IPR_ADDR INTC_IPRK -#define SDHI_IPR_POS 0 -#define SDHI_PRIORITY 3 - -/* SIU (Sound Interface Unit) */ -#define SIU_IRQ 108 -#define SIU_IPR_ADDR INTC_IPRJ -#define SIU_IPR_POS 1 -#define SIU_PRIORITY 3 - -#define PORT_PACR 0xA4050100UL -#define PORT_PBCR 0xA4050102UL -#define PORT_PCCR 0xA4050104UL -#define PORT_PDCR 0xA4050106UL -#define PORT_PECR 0xA4050108UL -#define PORT_PFCR 0xA405010AUL -#define PORT_PGCR 0xA405010CUL -#define PORT_PHCR 0xA405010EUL -#define PORT_PJCR 0xA4050110UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PLCR 0xA4050114UL -#define PORT_SCPCR 0xA4050116UL -#define PORT_PMCR 0xA4050118UL -#define PORT_PNCR 0xA405011AUL -#define PORT_PQCR 0xA405011CUL -#define PORT_PRCR 0xA405011EUL -#define PORT_PTCR 0xA405014CUL -#define PORT_PUCR 0xA405014EUL -#define PORT_PVCR 0xA4050150UL - -#define PORT_PSELA 0xA4050140UL -#define PORT_PSELB 0xA4050142UL -#define PORT_PSELC 0xA4050144UL -#define PORT_PSELE 0xA4050158UL - -#define PORT_HIZCRA 0xA4050146UL -#define PORT_HIZCRB 0xA4050148UL -#define PORT_DRVCR 0xA405014AUL - -#define PORT_PADR 0xA4050120UL -#define PORT_PBDR 0xA4050122UL -#define PORT_PCDR 0xA4050124UL -#define PORT_PDDR 0xA4050126UL -#define PORT_PEDR 0xA4050128UL -#define PORT_PFDR 0xA405012AUL -#define PORT_PGDR 0xA405012CUL -#define PORT_PHDR 0xA405012EUL -#define PORT_PJDR 0xA4050130UL -#define PORT_PKDR 0xA4050132UL -#define PORT_PLDR 0xA4050134UL -#define PORT_SCPDR 0xA4050136UL -#define PORT_PMDR 0xA4050138UL -#define PORT_PNDR 0xA405013AUL -#define PORT_PQDR 0xA405013CUL -#define PORT_PRDR 0xA405013EUL -#define PORT_PTDR 0xA405016CUL -#define PORT_PUDR 0xA405016EUL -#define PORT_PVDR 0xA4050170UL - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ2_IRQ 34 -#define IRQ3_IRQ 35 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 -#define IRQ6_IRQ 38 -#define IRQ7_IRQ 39 - -#define INTPRI00 0xA4140010UL - -#define IRQ0_IPR_ADDR INTPRI00 -#define IRQ1_IPR_ADDR INTPRI00 -#define IRQ2_IPR_ADDR INTPRI00 -#define IRQ3_IPR_ADDR INTPRI00 -#define IRQ4_IPR_ADDR INTPRI00 -#define IRQ5_IPR_ADDR INTPRI00 -#define IRQ6_IPR_ADDR INTPRI00 -#define IRQ7_IPR_ADDR INTPRI00 - -#define IRQ0_IPR_POS 7 -#define IRQ1_IPR_POS 6 -#define IRQ2_IPR_POS 5 -#define IRQ3_IPR_POS 4 -#define IRQ4_IPR_POS 3 -#define IRQ5_IPR_POS 2 -#define IRQ6_IPR_POS 1 -#define IRQ7_IPR_POS 0 - -#define IRQ0_PRIORITY 1 -#define IRQ1_PRIORITY 1 -#define IRQ2_PRIORITY 1 -#define IRQ3_PRIORITY 1 -#define IRQ4_PRIORITY 1 -#define IRQ5_PRIORITY 1 -#define IRQ6_PRIORITY 1 -#define IRQ7_PRIORITY 1 - -#endif /* __ASM_SH_IRQ_SH7343_H */ diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h deleted file mode 100644 index 19912ae6a7f7..000000000000 --- a/include/asm-sh/irq-sh7780.h +++ /dev/null @@ -1,311 +0,0 @@ -#ifndef __ASM_SH_IRQ_SH7780_H -#define __ASM_SH_IRQ_SH7780_H - -/* - * linux/include/asm-sh/irq-sh7780.h - * - * Copyright (C) 2004 Takashi SHUDO - */ -#define INTC_BASE 0xffd00000 -#define INTC_ICR0 (INTC_BASE+0x0) -#define INTC_ICR1 (INTC_BASE+0x1c) -#define INTC_INTPRI (INTC_BASE+0x10) -#define INTC_INTREQ (INTC_BASE+0x24) -#define INTC_INTMSK0 (INTC_BASE+0x44) -#define INTC_INTMSK1 (INTC_BASE+0x48) -#define INTC_INTMSK2 (INTC_BASE+0x40080) -#define INTC_INTMSKCLR0 (INTC_BASE+0x64) -#define INTC_INTMSKCLR1 (INTC_BASE+0x68) -#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) -#define INTC_NMIFCR (INTC_BASE+0xc0) -#define INTC_USERIMASK (INTC_BASE+0x30000) - -#define INTC_INT2PRI0 (INTC_BASE+0x40000) -#define INTC_INT2PRI1 (INTC_BASE+0x40004) -#define INTC_INT2PRI2 (INTC_BASE+0x40008) -#define INTC_INT2PRI3 (INTC_BASE+0x4000c) -#define INTC_INT2PRI4 (INTC_BASE+0x40010) -#define INTC_INT2PRI5 (INTC_BASE+0x40014) -#define INTC_INT2PRI6 (INTC_BASE+0x40018) -#define INTC_INT2PRI7 (INTC_BASE+0x4001c) -#define INTC_INT2A0 (INTC_BASE+0x40030) -#define INTC_INT2A1 (INTC_BASE+0x40034) -#define INTC_INT2MSKR (INTC_BASE+0x40038) -#define INTC_INT2MSKCR (INTC_BASE+0x4003c) -#define INTC_INT2B0 (INTC_BASE+0x40040) -#define INTC_INT2B1 (INTC_BASE+0x40044) -#define INTC_INT2B2 (INTC_BASE+0x40048) -#define INTC_INT2B3 (INTC_BASE+0x4004c) -#define INTC_INT2B4 (INTC_BASE+0x40050) -#define INTC_INT2B5 (INTC_BASE+0x40054) -#define INTC_INT2B6 (INTC_BASE+0x40058) -#define INTC_INT2B7 (INTC_BASE+0x4005c) -#define INTC_INT2GPIC (INTC_BASE+0x40090) -/* - NOTE: - *_IRQ = (INTEVT2 - 0x200)/0x20 -*/ -/* IRQ 0-7 line external int*/ -#define IRQ0_IRQ 2 -#define IRQ0_IPR_ADDR INTC_INTPRI -#define IRQ0_IPR_POS 7 -#define IRQ0_PRIORITY 2 - -#define IRQ1_IRQ 4 -#define IRQ1_IPR_ADDR INTC_INTPRI -#define IRQ1_IPR_POS 6 -#define IRQ1_PRIORITY 2 - -#define IRQ2_IRQ 6 -#define IRQ2_IPR_ADDR INTC_INTPRI -#define IRQ2_IPR_POS 5 -#define IRQ2_PRIORITY 2 - -#define IRQ3_IRQ 8 -#define IRQ3_IPR_ADDR INTC_INTPRI -#define IRQ3_IPR_POS 4 -#define IRQ3_PRIORITY 2 - -#define IRQ4_IRQ 10 -#define IRQ4_IPR_ADDR INTC_INTPRI -#define IRQ4_IPR_POS 3 -#define IRQ4_PRIORITY 2 - -#define IRQ5_IRQ 12 -#define IRQ5_IPR_ADDR INTC_INTPRI -#define IRQ5_IPR_POS 2 -#define IRQ5_PRIORITY 2 - -#define IRQ6_IRQ 14 -#define IRQ6_IPR_ADDR INTC_INTPRI -#define IRQ6_IPR_POS 1 -#define IRQ6_PRIORITY 2 - -#define IRQ7_IRQ 0 -#define IRQ7_IPR_ADDR INTC_INTPRI -#define IRQ7_IPR_POS 0 -#define IRQ7_PRIORITY 2 - -/* TMU */ -/* ch0 */ -#define TMU_IRQ 28 -#define TMU_IPR_ADDR INTC_INT2PRI0 -#define TMU_IPR_POS 3 -#define TMU_PRIORITY 2 - -#define TIMER_IRQ 28 -#define TIMER_IPR_ADDR INTC_INT2PRI0 -#define TIMER_IPR_POS 3 -#define TIMER_PRIORITY 2 - -/* ch 1*/ -#define TMU_CH1_IRQ 29 -#define TMU_CH1_IPR_ADDR INTC_INT2PRI0 -#define TMU_CH1_IPR_POS 2 -#define TMU_CH1_PRIORITY 2 - -#define TIMER1_IRQ 29 -#define TIMER1_IPR_ADDR INTC_INT2PRI0 -#define TIMER1_IPR_POS 2 -#define TIMER1_PRIORITY 2 - -/* ch 2*/ -#define TMU_CH2_IRQ 30 -#define TMU_CH2_IPR_ADDR INTC_INT2PRI0 -#define TMU_CH2_IPR_POS 1 -#define TMU_CH2_PRIORITY 2 -/* ch 2 Input capture */ -#define TMU_CH2IC_IRQ 31 -#define TMU_CH2IC_IPR_ADDR INTC_INT2PRI0 -#define TMU_CH2IC_IPR_POS 0 -#define TMU_CH2IC_PRIORITY 2 -/* ch 3 */ -#define TMU_CH3_IRQ 96 -#define TMU_CH3_IPR_ADDR INTC_INT2PRI1 -#define TMU_CH3_IPR_POS 3 -#define TMU_CH3_PRIORITY 2 -/* ch 4 */ -#define TMU_CH4_IRQ 97 -#define TMU_CH4_IPR_ADDR INTC_INT2PRI1 -#define TMU_CH4_IPR_POS 2 -#define TMU_CH4_PRIORITY 2 -/* ch 5*/ -#define TMU_CH5_IRQ 98 -#define TMU_CH5_IPR_ADDR INTC_INT2PRI1 -#define TMU_CH5_IPR_POS 1 -#define TMU_CH5_PRIORITY 2 - -/* SCIF0 */ -#define SCIF0_ERI_IRQ 40 -#define SCIF0_RXI_IRQ 41 -#define SCIF0_BRI_IRQ 42 -#define SCIF0_TXI_IRQ 43 -#define SCIF0_IPR_ADDR INTC_INT2PRI2 -#define SCIF0_IPR_POS 3 -#define SCIF0_PRIORITY 3 - -/* SCIF1 */ -#define SCIF1_ERI_IRQ 76 -#define SCIF1_RXI_IRQ 77 -#define SCIF1_BRI_IRQ 78 -#define SCIF1_TXI_IRQ 79 -#define SCIF1_IPR_ADDR INTC_INT2PRI2 -#define SCIF1_IPR_POS 2 -#define SCIF1_PRIORITY 3 - -#define WDT_IRQ 27 -#define WDT_IPR_ADDR INTC_INT2PRI2 -#define WDT_IPR_POS 1 -#define WDT_PRIORITY 2 - -/* DMAC(0) */ -#define DMINT0_IRQ 34 -#define DMINT1_IRQ 35 -#define DMINT2_IRQ 36 -#define DMINT3_IRQ 37 -#define DMINT4_IRQ 44 -#define DMINT5_IRQ 45 -#define DMINT6_IRQ 46 -#define DMINT7_IRQ 47 -#define DMAE_IRQ 38 -#define DMA0_IPR_ADDR INTC_INT2PRI3 -#define DMA0_IPR_POS 2 -#define DMA0_PRIORITY 7 - -/* DMAC(1) */ -#define DMINT8_IRQ 92 -#define DMINT9_IRQ 93 -#define DMINT10_IRQ 94 -#define DMINT11_IRQ 95 -#define DMA1_IPR_ADDR INTC_INT2PRI3 -#define DMA1_IPR_POS 1 -#define DMA1_PRIORITY 7 - -#define DMTE0_IRQ DMINT0_IRQ -#define DMTE4_IRQ DMINT4_IRQ -#define DMA_IPR_ADDR DMA0_IPR_ADDR -#define DMA_IPR_POS DMA0_IPR_POS -#define DMA_PRIORITY DMA0_PRIORITY - -/* CMT */ -#define CMT_IRQ 56 -#define CMT_IPR_ADDR INTC_INT2PRI4 -#define CMT_IPR_POS 3 -#define CMT_PRIORITY 0 - -/* HAC */ -#define HAC_IRQ 60 -#define HAC_IPR_ADDR INTC_INT2PRI4 -#define HAC_IPR_POS 2 -#define CMT_PRIORITY 0 - -/* PCIC(0) */ -#define PCIC0_IRQ 64 -#define PCIC0_IPR_ADDR INTC_INT2PRI4 -#define PCIC0_IPR_POS 1 -#define PCIC0_PRIORITY 2 - -/* PCIC(1) */ -#define PCIC1_IRQ 65 -#define PCIC1_IPR_ADDR INTC_INT2PRI4 -#define PCIC1_IPR_POS 0 -#define PCIC1_PRIORITY 2 - -/* PCIC(2) */ -#define PCIC2_IRQ 66 -#define PCIC2_IPR_ADDR INTC_INT2PRI5 -#define PCIC2_IPR_POS 3 -#define PCIC2_PRIORITY 2 - -/* PCIC(3) */ -#define PCIC3_IRQ 67 -#define PCIC3_IPR_ADDR INTC_INT2PRI5 -#define PCIC3_IPR_POS 2 -#define PCIC3_PRIORITY 2 - -/* PCIC(4) */ -#define PCIC4_IRQ 68 -#define PCIC4_IPR_ADDR INTC_INT2PRI5 -#define PCIC4_IPR_POS 1 -#define PCIC4_PRIORITY 2 - -/* PCIC(5) */ -#define PCICERR_IRQ 69 -#define PCICPWD3_IRQ 70 -#define PCICPWD2_IRQ 71 -#define PCICPWD1_IRQ 72 -#define PCICPWD0_IRQ 73 -#define PCIC5_IPR_ADDR INTC_INT2PRI5 -#define PCIC5_IPR_POS 0 -#define PCIC5_PRIORITY 2 - -/* SIOF */ -#define SIOF_IRQ 80 -#define SIOF_IPR_ADDR INTC_INT2PRI6 -#define SIOF_IPR_POS 3 -#define SIOF_PRIORITY 3 - -/* HSPI */ -#define HSPI_IRQ 84 -#define HSPI_IPR_ADDR INTC_INT2PRI6 -#define HSPI_IPR_POS 2 -#define HSPI_PRIORITY 3 - -/* MMCIF */ -#define MMCIF_FSTAT_IRQ 88 -#define MMCIF_TRAN_IRQ 89 -#define MMCIF_ERR_IRQ 90 -#define MMCIF_FRDY_IRQ 91 -#define MMCIF_IPR_ADDR INTC_INT2PRI6 -#define MMCIF_IPR_POS 1 -#define HSPI_PRIORITY 3 - -/* SSI */ -#define SSI_IRQ 100 -#define SSI_IPR_ADDR INTC_INT2PRI6 -#define SSI_IPR_POS 0 -#define SSI_PRIORITY 3 - -/* FLCTL */ -#define FLCTL_FLSTE_IRQ 104 -#define FLCTL_FLTEND_IRQ 105 -#define FLCTL_FLTRQ0_IRQ 106 -#define FLCTL_FLTRQ1_IRQ 107 -#define FLCTL_IPR_ADDR INTC_INT2PRI7 -#define FLCTL_IPR_POS 3 -#define FLCTL_PRIORITY 3 - -/* GPIO */ -#define GPIO0_IRQ 108 -#define GPIO1_IRQ 109 -#define GPIO2_IRQ 110 -#define GPIO3_IRQ 111 -#define GPIO_IPR_ADDR INTC_INT2PRI7 -#define GPIO_IPR_POS 2 -#define GPIO_PRIORITY 3 - -#define INTC_TMU0_MSK 0 -#define INTC_TMU3_MSK 1 -#define INTC_RTC_MSK 2 -#define INTC_SCIF0_MSK 3 -#define INTC_SCIF1_MSK 4 -#define INTC_WDT_MSK 5 -#define INTC_HUID_MSK 7 -#define INTC_DMAC0_MSK 8 -#define INTC_DMAC1_MSK 9 -#define INTC_CMT_MSK 12 -#define INTC_HAC_MSK 13 -#define INTC_PCIC0_MSK 14 -#define INTC_PCIC1_MSK 15 -#define INTC_PCIC2_MSK 16 -#define INTC_PCIC3_MSK 17 -#define INTC_PCIC4_MSK 18 -#define INTC_PCIC5_MSK 19 -#define INTC_SIOF_MSK 20 -#define INTC_HSPI_MSK 21 -#define INTC_MMCIF_MSK 22 -#define INTC_SSI_MSK 23 -#define INTC_FLCTL_MSK 24 -#define INTC_GPIO_MSK 25 - -#endif /* __ASM_SH_IRQ_SH7780_H */ diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index d71326b3c90c..f10cfc10227e 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -1,265 +1,9 @@ #ifndef __ASM_SH_IRQ_H #define __ASM_SH_IRQ_H -/* - * - * linux/include/asm-sh/irq.h - * - * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Paul Mundt - * - */ - #include #include /* for pt_regs */ -#if defined(CONFIG_CPU_SH2) -#include -#endif - -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - -#define INTC_DMAC0_MSK 0 - -#if defined(CONFIG_CPU_SH3) -#define INTC_IPRA 0xfffffee2UL -#define INTC_IPRB 0xfffffee4UL -#elif defined(CONFIG_CPU_SH4) -#define INTC_IPRA 0xffd00004UL -#define INTC_IPRB 0xffd00008UL -#define INTC_IPRC 0xffd0000cUL -#define INTC_IPRD 0xffd00010UL -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7206) -#ifdef CONFIG_SH_CMT -#define TIMER_IRQ CMI0_IRQ -#define TIMER_IPR_ADDR INTC_IPR08 -#define TIMER_IPR_POS 3 -#define TIMER_PRIORITY 2 - -#define TIMER1_IRQ CMI1_IRQ -#define TIMER1_IPR_ADDR INTC_IPR08 -#define TIMER1_IPR_POS 2 -#define TIMER1_PRIORITY 2 -#endif - -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -#define TIMER_IRQ CMI0_IRQ -#define TIMER_IPR_ADDR INTC_IPRC -#define TIMER_IPR_POS 1 -#define TIMER_PRIORITY 2 - -#define TIMER1_IRQ CMI1_IRQ -#define TIMER1_IPR_ADDR INTC_IPRC -#define TIMER1_IPR_POS 0 -#define TIMER1_PRIORITY 4 - -#else -#define TIMER_IRQ 16 -#define TIMER_IPR_ADDR INTC_IPRA -#define TIMER_IPR_POS 3 -#define TIMER_PRIORITY 2 - -#define TIMER1_IRQ 17 -#define TIMER1_IPR_ADDR INTC_IPRA -#define TIMER1_IPR_POS 2 -#define TIMER1_PRIORITY 4 -#endif - -#if !defined(CONFIG_CPU_SH2) -#define RTC_IRQ 22 -#define RTC_IPR_ADDR INTC_IPRA -#define RTC_IPR_POS 0 -#define RTC_PRIORITY TIMER_PRIORITY -#endif - -#if defined(CONFIG_CPU_SH3) -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMA_IPR_ADDR INTC_IPRE -#define DMA_IPR_POS 3 -#define DMA_PRIORITY 7 -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -/* TMU2 */ -#define TIMER2_IRQ 18 -#define TIMER2_IPR_ADDR INTC_IPRA -#define TIMER2_IPR_POS 1 -#define TIMER2_PRIORITY 2 - -/* WDT */ -#define WDT_IRQ 27 -#define WDT_IPR_ADDR INTC_IPRB -#define WDT_IPR_POS 3 -#define WDT_PRIORITY 2 - -/* SIM (SIM Card Module) */ -#define SIM_ERI_IRQ 23 -#define SIM_RXI_IRQ 24 -#define SIM_TXI_IRQ 25 -#define SIM_TEND_IRQ 26 -#define SIM_IPR_ADDR INTC_IPRB -#define SIM_IPR_POS 1 -#define SIM_PRIORITY 2 - -/* VIO (Video I/O) */ -#define VIO_IRQ 52 -#define VIO_IPR_ADDR INTC_IPRE -#define VIO_IPR_POS 2 -#define VIO_PRIORITY 2 - -/* MFI (Multi Functional Interface) */ -#define MFI_IRQ 56 -#define MFI_IPR_ADDR INTC_IPRE -#define MFI_IPR_POS 1 -#define MFI_PRIORITY 2 - -/* VPU (Video Processing Unit) */ -#define VPU_IRQ 60 -#define VPU_IPR_ADDR INTC_IPRE -#define VPU_IPR_POS 0 -#define VPU_PRIORITY 2 - -/* KEY (Key Scan Interface) */ -#define KEY_IRQ 79 -#define KEY_IPR_ADDR INTC_IPRF -#define KEY_IPR_POS 3 -#define KEY_PRIORITY 2 - -/* CMT (Compare Match Timer) */ -#define CMT_IRQ 104 -#define CMT_IPR_ADDR INTC_IPRF -#define CMT_IPR_POS 0 -#define CMT_PRIORITY 2 - -/* DMAC(1) */ -#define DMTE0_IRQ 48 -#define DMTE1_IRQ 49 -#define DMTE2_IRQ 50 -#define DMTE3_IRQ 51 -#define DMA1_IPR_ADDR INTC_IPRE -#define DMA1_IPR_POS 3 -#define DMA1_PRIORITY 7 - -/* DMAC(2) */ -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#define DMA2_IPR_ADDR INTC_IPRF -#define DMA2_IPR_POS 2 -#define DMA2_PRIORITY 7 - -/* SIOF0 */ -#define SIOF0_IRQ 84 -#define SIOF0_IPR_ADDR INTC_IPRH -#define SIOF0_IPR_POS 3 -#define SIOF0_PRIORITY 3 - -/* FLCTL (Flash Memory Controller) */ -#define FLSTE_IRQ 92 -#define FLTEND_IRQ 93 -#define FLTRQ0_IRQ 94 -#define FLTRQ1_IRQ 95 -#define FLCTL_IPR_ADDR INTC_IPRH -#define FLCTL_IPR_POS 1 -#define FLCTL_PRIORITY 3 - -/* IIC (IIC Bus Interface) */ -#define IIC_ALI_IRQ 96 -#define IIC_TACKI_IRQ 97 -#define IIC_WAITI_IRQ 98 -#define IIC_DTEI_IRQ 99 -#define IIC_IPR_ADDR INTC_IPRH -#define IIC_IPR_POS 0 -#define IIC_PRIORITY 3 - -/* SIO0 */ -#define SIO0_IRQ 88 -#define SIO0_IPR_ADDR INTC_IPRI -#define SIO0_IPR_POS 3 -#define SIO0_PRIORITY 3 - -/* SIU (Sound Interface Unit) */ -#define SIU_IRQ 108 -#define SIU_IPR_ADDR INTC_IPRJ -#define SIU_IPR_POS 1 -#define SIU_PRIORITY 3 - -#endif -#elif defined(CONFIG_CPU_SH4) -#define DMTE0_IRQ 34 -#define DMTE1_IRQ 35 -#define DMTE2_IRQ 36 -#define DMTE3_IRQ 37 -#define DMTE4_IRQ 44 /* 7751R only */ -#define DMTE5_IRQ 45 /* 7751R only */ -#define DMTE6_IRQ 46 /* 7751R only */ -#define DMTE7_IRQ 47 /* 7751R only */ -#define DMAE_IRQ 38 -#define DMA_IPR_ADDR INTC_IPRC -#define DMA_IPR_POS 2 -#define DMA_PRIORITY 7 -#endif - -#if defined (CONFIG_CPU_SUBTYPE_SH7707) || defined (CONFIG_CPU_SUBTYPE_SH7708) || \ - defined (CONFIG_CPU_SUBTYPE_SH7709) || defined (CONFIG_CPU_SUBTYPE_SH7750) || \ - defined (CONFIG_CPU_SUBTYPE_SH7751) || defined (CONFIG_CPU_SUBTYPE_SH7706) -#define SCI_ERI_IRQ 23 -#define SCI_RXI_IRQ 24 -#define SCI_TXI_IRQ 25 -#define SCI_IPR_ADDR INTC_IPRB -#define SCI_IPR_POS 1 -#define SCI_PRIORITY 3 -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -#define SCIF0_IRQ 80 -#define SCIF0_IPR_ADDR INTC_IPRG -#define SCIF0_IPR_POS 3 -#define SCIF0_PRIORITY 3 -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -#define SCIF_ERI_IRQ 56 -#define SCIF_RXI_IRQ 57 -#define SCIF_BRI_IRQ 58 -#define SCIF_TXI_IRQ 59 -#define SCIF_IPR_ADDR INTC_IPRE -#define SCIF_IPR_POS 1 -#define SCIF_PRIORITY 3 - -#define IRDA_ERI_IRQ 52 -#define IRDA_RXI_IRQ 53 -#define IRDA_BRI_IRQ 54 -#define IRDA_TXI_IRQ 55 -#define IRDA_IPR_ADDR INTC_IPRE -#define IRDA_IPR_POS 2 -#define IRDA_PRIORITY 3 -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202) -#define SCIF_ERI_IRQ 40 -#define SCIF_RXI_IRQ 41 -#define SCIF_BRI_IRQ 42 -#define SCIF_TXI_IRQ 43 -#define SCIF_IPR_ADDR INTC_IPRC -#define SCIF_IPR_POS 1 -#define SCIF_PRIORITY 3 -#if defined(CONFIG_CPU_SUBTYPE_ST40STB1) -#define SCIF1_ERI_IRQ 23 -#define SCIF1_RXI_IRQ 24 -#define SCIF1_BRI_IRQ 25 -#define SCIF1_TXI_IRQ 26 -#define SCIF1_IPR_ADDR INTC_IPRB -#define SCIF1_IPR_POS 1 -#define SCIF1_PRIORITY 3 -#endif /* ST40STB1 */ - -#endif /* 775x / SH4-202 / ST40STB1 */ -#endif /* 7780 */ - /* NR_IRQS is made from three components: * 1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules * 2. PINT_NR_IRQS - number of PINT interrupts @@ -348,50 +92,12 @@ /* NR_IRQS. 1+2+3 */ #define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS) -extern void disable_irq(unsigned int); -extern void disable_irq_nosync(unsigned int); -extern void enable_irq(unsigned int); - /* * Simple Mask Register Support */ extern void make_maskreg_irq(unsigned int irq); extern unsigned short *irq_mask_register; -#if defined(CONFIG_CPU_SUBTYPE_SH7619) -#define IRQ0_IRQ 16 -#define IRQ1_IRQ 17 -#define IRQ2_IRQ 18 -#define IRQ3_IRQ 19 -#define IRQ4_IRQ 32 -#define IRQ5_IRQ 33 -#define IRQ6_IRQ 34 -#define IRQ7_IRQ 35 -#elif !defined(CONFIG_CPU_SUBTYPE_SH7206) -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ2_IRQ 34 -#define IRQ3_IRQ 35 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 -#endif - -#define IRQ0_PRIORITY 1 -#define IRQ1_PRIORITY 1 -#define IRQ2_PRIORITY 1 -#define IRQ3_PRIORITY 1 -#define IRQ4_PRIORITY 1 -#define IRQ5_PRIORITY 1 - -#ifndef IRQ0_IPR_POS -#define IRQ0_IPR_POS 0 -#define IRQ1_IPR_POS 1 -#define IRQ2_IPR_POS 2 -#define IRQ3_IPR_POS 3 -#define IRQ4_IPR_POS 0 -#define IRQ5_IPR_POS 1 -#endif - /* * PINT IRQs */ @@ -410,350 +116,6 @@ struct ipr_data { extern void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs); extern void make_imask_irq(unsigned int irq); -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -#undef INTC_IPRA -#undef INTC_IPRB -#define INTC_IPRA 0xA414FEE2UL -#define INTC_IPRB 0xA414FEE4UL -#define INTC_IPRC 0xA4140016UL -#define INTC_IPRD 0xA4140018UL -#define INTC_IPRE 0xA414001AUL -#define INTC_IPRF 0xA4080000UL -#define INTC_IPRG 0xA4080002UL -#define INTC_IPRH 0xA4080004UL -#define INTC_IPRI 0xA4080006UL -#define INTC_IPRJ 0xA4080008UL - -#define INTC_IMR0 0xA4080040UL -#define INTC_IMR1 0xA4080042UL -#define INTC_IMR2 0xA4080044UL -#define INTC_IMR3 0xA4080046UL -#define INTC_IMR4 0xA4080048UL -#define INTC_IMR5 0xA408004AUL -#define INTC_IMR6 0xA408004CUL -#define INTC_IMR7 0xA408004EUL -#define INTC_IMR8 0xA4080050UL -#define INTC_IMR9 0xA4080052UL -#define INTC_IMR10 0xA4080054UL - -#define INTC_IMCR0 0xA4080060UL -#define INTC_IMCR1 0xA4080062UL -#define INTC_IMCR2 0xA4080064UL -#define INTC_IMCR3 0xA4080066UL -#define INTC_IMCR4 0xA4080068UL -#define INTC_IMCR5 0xA408006AUL -#define INTC_IMCR6 0xA408006CUL -#define INTC_IMCR7 0xA408006EUL -#define INTC_IMCR8 0xA4080070UL -#define INTC_IMCR9 0xA4080072UL -#define INTC_IMCR10 0xA4080074UL - -#define INTC_ICR0 0xA414FEE0UL -#define INTC_ICR1 0xA4140010UL - -#define INTC_IRR0 0xA4140004UL - -#define PORT_PACR 0xA4050100UL -#define PORT_PBCR 0xA4050102UL -#define PORT_PCCR 0xA4050104UL -#define PORT_PDCR 0xA4050106UL -#define PORT_PECR 0xA4050108UL -#define PORT_PFCR 0xA405010AUL -#define PORT_PGCR 0xA405010CUL -#define PORT_PHCR 0xA405010EUL -#define PORT_PJCR 0xA4050110UL -#define PORT_PKCR 0xA4050112UL -#define PORT_PLCR 0xA4050114UL -#define PORT_SCPCR 0xA4050116UL -#define PORT_PMCR 0xA4050118UL -#define PORT_PNCR 0xA405011AUL -#define PORT_PQCR 0xA405011CUL - -#define PORT_PSELA 0xA4050140UL -#define PORT_PSELB 0xA4050142UL -#define PORT_PSELC 0xA4050144UL - -#define PORT_HIZCRA 0xA4050146UL -#define PORT_HIZCRB 0xA4050148UL -#define PORT_DRVCR 0xA4050150UL - -#define PORT_PADR 0xA4050120UL -#define PORT_PBDR 0xA4050122UL -#define PORT_PCDR 0xA4050124UL -#define PORT_PDDR 0xA4050126UL -#define PORT_PEDR 0xA4050128UL -#define PORT_PFDR 0xA405012AUL -#define PORT_PGDR 0xA405012CUL -#define PORT_PHDR 0xA405012EUL -#define PORT_PJDR 0xA4050130UL -#define PORT_PKDR 0xA4050132UL -#define PORT_PLDR 0xA4050134UL -#define PORT_SCPDR 0xA4050136UL -#define PORT_PMDR 0xA4050138UL -#define PORT_PNDR 0xA405013AUL -#define PORT_PQDR 0xA405013CUL - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ2_IRQ 34 -#define IRQ3_IRQ 35 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 - -#define IRQ0_IPR_ADDR INTC_IPRC -#define IRQ1_IPR_ADDR INTC_IPRC -#define IRQ2_IPR_ADDR INTC_IPRC -#define IRQ3_IPR_ADDR INTC_IPRC -#define IRQ4_IPR_ADDR INTC_IPRD -#define IRQ5_IPR_ADDR INTC_IPRD - -#define IRQ0_IPR_POS 0 -#define IRQ1_IPR_POS 1 -#define IRQ2_IPR_POS 2 -#define IRQ3_IPR_POS 3 -#define IRQ4_IPR_POS 0 -#define IRQ5_IPR_POS 1 - -#define IRQ0_PRIORITY 1 -#define IRQ1_PRIORITY 1 -#define IRQ2_PRIORITY 1 -#define IRQ3_PRIORITY 1 -#define IRQ4_PRIORITY 1 -#define IRQ5_PRIORITY 1 - -extern int ipr_irq_demux(int irq); -#define __irq_demux(irq) ipr_irq_demux(irq) - -#elif defined(CONFIG_CPU_SUBTYPE_SH7604) -#define INTC_IPRA 0xfffffee2UL -#define INTC_IPRB 0xfffffe60UL - -#define INTC_VCRA 0xfffffe62UL -#define INTC_VCRB 0xfffffe64UL -#define INTC_VCRC 0xfffffe66UL -#define INTC_VCRD 0xfffffe68UL - -#define INTC_VCRWDT 0xfffffee4UL -#define INTC_VCRDIV 0xffffff0cUL -#define INTC_VCRDMA0 0xffffffa0UL -#define INTC_VCRDMA1 0xffffffa8UL - -#define INTC_ICR 0xfffffee0UL -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) -#define INTC_IRR0 0xa4000004UL -#define INTC_IRR1 0xa4000006UL -#define INTC_IRR2 0xa4000008UL - -#define INTC_ICR0 0xfffffee0UL -#define INTC_ICR1 0xa4000010UL -#define INTC_ICR2 0xa4000012UL -#define INTC_INTER 0xa4000014UL - -#define INTC_IPRC 0xa4000016UL -#define INTC_IPRD 0xa4000018UL -#define INTC_IPRE 0xa400001aUL -#if defined(CONFIG_CPU_SUBTYPE_SH7707) -#define INTC_IPRF 0xa400001cUL -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -#define INTC_IPRF 0xa4080000UL -#define INTC_IPRG 0xa4080002UL -#define INTC_IPRH 0xa4080004UL -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) -/* Interrupt Controller Registers */ -#undef INTC_IPRA -#undef INTC_IPRB -#define INTC_IPRA 0xA414FEE2UL -#define INTC_IPRB 0xA414FEE4UL -#define INTC_IPRF 0xA4080000UL -#define INTC_IPRG 0xA4080002UL -#define INTC_IPRH 0xA4080004UL -#define INTC_IPRI 0xA4080006UL - -#undef INTC_ICR0 -#undef INTC_ICR1 -#define INTC_ICR0 0xA414FEE0UL -#define INTC_ICR1 0xA4140010UL - -#define INTC_IRR0 0xa4000004UL -#define INTC_IRR1 0xa4000006UL -#define INTC_IRR2 0xa4000008UL -#define INTC_IRR3 0xa400000AUL -#define INTC_IRR4 0xa400000CUL -#define INTC_IRR5 0xa4080020UL -#define INTC_IRR7 0xa4080024UL -#define INTC_IRR8 0xa4080026UL - -/* Interrupt numbers */ -#define TIMER2_IRQ 18 -#define TIMER2_IPR_ADDR INTC_IPRA -#define TIMER2_IPR_POS 1 -#define TIMER2_PRIORITY 2 - -/* WDT */ -#define WDT_IRQ 27 -#define WDT_IPR_ADDR INTC_IPRB -#define WDT_IPR_POS 3 -#define WDT_PRIORITY 2 - -#define SCIF0_ERI_IRQ 52 -#define SCIF0_RXI_IRQ 53 -#define SCIF0_BRI_IRQ 54 -#define SCIF0_TXI_IRQ 55 -#define SCIF0_IPR_ADDR INTC_IPRE -#define SCIF0_IPR_POS 2 -#define SCIF0_PRIORITY 3 - -#define DMTE4_IRQ 76 -#define DMTE5_IRQ 77 -#define DMA2_IPR_ADDR INTC_IPRF -#define DMA2_IPR_POS 2 -#define DMA2_PRIORITY 7 - -#define IPSEC_IRQ 79 -#define IPSEC_IPR_ADDR INTC_IPRF -#define IPSEC_IPR_POS 3 -#define IPSEC_PRIORITY 3 - -/* EDMAC */ -#define EDMAC0_IRQ 80 -#define EDMAC0_IPR_ADDR INTC_IPRG -#define EDMAC0_IPR_POS 3 -#define EDMAC0_PRIORITY 3 - -#define EDMAC1_IRQ 81 -#define EDMAC1_IPR_ADDR INTC_IPRG -#define EDMAC1_IPR_POS 2 -#define EDMAC1_PRIORITY 3 - -#define EDMAC2_IRQ 82 -#define EDMAC2_IPR_ADDR INTC_IPRG -#define EDMAC2_IPR_POS 1 -#define EDMAC2_PRIORITY 3 - -/* SIOF */ -#define SIOF0_ERI_IRQ 96 -#define SIOF0_TXI_IRQ 97 -#define SIOF0_RXI_IRQ 98 -#define SIOF0_CCI_IRQ 99 -#define SIOF0_IPR_ADDR INTC_IPRH -#define SIOF0_IPR_POS 0 -#define SIOF0_PRIORITY 7 - -#define SIOF1_ERI_IRQ 100 -#define SIOF1_TXI_IRQ 101 -#define SIOF1_RXI_IRQ 102 -#define SIOF1_CCI_IRQ 103 -#define SIOF1_IPR_ADDR INTC_IPRI -#define SIOF1_IPR_POS 1 -#define SIOF1_PRIORITY 7 -#endif /* CONFIG_CPU_SUBTYPE_SH7710 */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -#define PORT_PACR 0xa4050100UL -#define PORT_PBCR 0xa4050102UL -#define PORT_PCCR 0xa4050104UL -#define PORT_PETCR 0xa4050106UL -#define PORT_PADR 0xa4050120UL -#define PORT_PBDR 0xa4050122UL -#define PORT_PCDR 0xa4050124UL -#else -#define PORT_PACR 0xa4000100UL -#define PORT_PBCR 0xa4000102UL -#define PORT_PCCR 0xa4000104UL -#define PORT_PFCR 0xa400010aUL -#define PORT_PADR 0xa4000120UL -#define PORT_PBDR 0xa4000122UL -#define PORT_PCDR 0xa4000124UL -#define PORT_PFDR 0xa400012aUL -#endif - -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ2_IRQ 34 -#define IRQ3_IRQ 35 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 - -#define IRQ0_IPR_ADDR INTC_IPRC -#define IRQ1_IPR_ADDR INTC_IPRC -#define IRQ2_IPR_ADDR INTC_IPRC -#define IRQ3_IPR_ADDR INTC_IPRC -#define IRQ4_IPR_ADDR INTC_IPRD -#define IRQ5_IPR_ADDR INTC_IPRD - -#define IRQ0_IPR_POS 0 -#define IRQ1_IPR_POS 1 -#define IRQ2_IPR_POS 2 -#define IRQ3_IPR_POS 3 -#define IRQ4_IPR_POS 0 -#define IRQ5_IPR_POS 1 - -#define IRQ0_PRIORITY 1 -#define IRQ1_PRIORITY 1 -#define IRQ2_PRIORITY 1 -#define IRQ3_PRIORITY 1 -#define IRQ4_PRIORITY 1 -#define IRQ5_PRIORITY 1 - -#define PINT0_IRQ 40 -#define PINT8_IRQ 41 - -#define PINT0_IPR_ADDR INTC_IPRD -#define PINT8_IPR_ADDR INTC_IPRD - -#define PINT0_IPR_POS 3 -#define PINT8_IPR_POS 2 -#define PINT0_PRIORITY 2 -#define PINT8_PRIORITY 2 - -extern int ipr_irq_demux(int irq); -#define __irq_demux(irq) ipr_irq_demux(irq) -#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_ST40STB1) || defined(CONFIG_CPU_SUBTYPE_SH4_202) -#define INTC_ICR 0xffd00000 -#define INTC_ICR_NMIL (1<<15) -#define INTC_ICR_MAI (1<<14) -#define INTC_ICR_NMIB (1<<9) -#define INTC_ICR_NMIE (1<<8) -#define INTC_ICR_IRLM (1<<7) -#endif - -#ifdef CONFIG_CPU_SUBTYPE_SH7780 -#include -#endif - -/* SH with INTC2-style interrupts */ -#ifdef CONFIG_CPU_HAS_INTC2_IRQ -#if defined(CONFIG_CPU_SUBTYPE_ST40STB1) -#define INTC2_BASE 0xfe080000 -#define INTC2_FIRST_IRQ 64 -#define INTC2_INTREQ_OFFSET 0x20 -#define INTC2_INTMSK_OFFSET 0x40 -#define INTC2_INTMSKCLR_OFFSET 0x60 -#define NR_INTC2_IRQS 25 -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -#define INTC2_BASE 0xfe080000 -#define INTC2_FIRST_IRQ 48 /* INTEVT 0x800 */ -#define INTC2_INTREQ_OFFSET 0x20 -#define INTC2_INTMSK_OFFSET 0x40 -#define INTC2_INTMSKCLR_OFFSET 0x60 -#define NR_INTC2_IRQS 64 -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -#define INTC2_BASE 0xffd40000 -#define INTC2_FIRST_IRQ 21 -#define INTC2_INTMSK_OFFSET (0x38) -#define INTC2_INTMSKCLR_OFFSET (0x3c) -#define NR_INTC2_IRQS 60 -#endif - -#define INTC2_INTPRI_OFFSET 0x00 - struct intc2_data { unsigned short irq; unsigned char ipr_offset, ipr_shift; @@ -763,20 +125,14 @@ struct intc2_data { void make_intc2_irq(struct intc2_data *, unsigned int nr_irqs); void init_IRQ_intc2(void); -#endif - -extern int shmse_irq_demux(int irq); static inline int generic_irq_demux(int irq) { return irq; } -#ifndef __irq_demux -#define __irq_demux(irq) (irq) -#endif #define irq_canonicalize(irq) (irq) -#define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq)) +#define irq_demux(irq) sh_mv.mv_irq_demux(irq) #ifdef CONFIG_4KSTACKS extern void irq_ctx_init(int cpu); @@ -787,12 +143,4 @@ extern void irq_ctx_exit(int cpu); # define irq_ctx_exit(cpu) do { } while (0) #endif -#if defined(CONFIG_CPU_SUBTYPE_SH73180) -#include -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7343) -#include -#endif - #endif /* __ASM_SH_IRQ_H */ -- cgit v1.2.3 From b552c7e8bceae8a04ae79ecee6fa369c1ba4f8e4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Nov 2006 14:14:29 +0900 Subject: sh: Hook SH7785 in to the build system. Simple 7785 placeholders to start hooking up other bits of code. Signed-off-by: Paul Mundt --- arch/sh/kernel/setup.c | 3 ++- arch/sh/mm/Kconfig | 5 +++++ include/asm-sh/bugs.h | 2 +- include/asm-sh/processor.h | 3 +++ 4 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index c24f6390007b..696ca75752d9 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -392,6 +392,7 @@ static int __init topology_init(void) subsys_initcall(topology_init); static const char *cpu_name[] = { + [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7604] = "SH7604", [CPU_SH7300] = "SH7300", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", @@ -404,7 +405,7 @@ static const char *cpu_name[] = { [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", - [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", + [CPU_SH7785] = "SH7785", [CPU_SH_NONE] = "Unknown" }; diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 814a17586974..27463e26a7b8 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -171,6 +171,11 @@ config CPU_SUBTYPE_SH7780 select CPU_SH4A select CPU_HAS_INTC2_IRQ +config CPU_SUBTYPE_SH7785 + bool "Support SH7785 processor" + select CPU_SH4A + select CPU_HAS_INTC2_IRQ + comment "SH4AL-DSP Processor Support" config CPU_SUBTYPE_SH73180 diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 51cc9e38d16a..795047da5e17 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -36,7 +36,7 @@ static void __init check_bugs(void) case CPU_SH7750 ... CPU_SH4_501: *p++ = '4'; break; - case CPU_SH7770 ... CPU_SH7781: + case CPU_SH7770 ... CPU_SH7785: *p++ = '4'; *p++ = 'a'; break; diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 29a56c505ae5..da22ac30c75f 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -50,7 +50,10 @@ enum cpu_type { /* SH-4 types */ CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, + + /* SH-4A types */ CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781, + CPU_SH7785, /* Unknown subtype */ CPU_SH_NONE -- cgit v1.2.3 From 21440cf04a64cd1b1209c12a6e1a3afba2a28709 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Nov 2006 14:30:26 +0900 Subject: sh: Preliminary support for SH-X2 MMU. This adds some preliminary support for the SH-X2 MMU, used by newer SH-4A parts (particularly SH7785). This MMU implements a 'compat' mode with SH-X MMUs and an 'extended' mode for SH-X2 extended features. Extended features include additional page sizes (8kB, 4MB, 64MB), as well as the addition of page execute permissions. The extended mode attributes are placed in a second data array, which requires us to switch to 64-bit PTEs when in X2 mode. With the addition of the exec perms, we also overhaul the mmap prots somewhat, now that it's possible to handle them more intelligently. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 49 +++++- arch/sh/mm/init.c | 4 +- arch/sh/mm/ioremap.c | 4 +- arch/sh/mm/pg-sh4.c | 12 +- include/asm-sh/elf.h | 2 +- include/asm-sh/page.h | 35 +++- include/asm-sh/pgtable-2level.h | 70 -------- include/asm-sh/pgtable.h | 361 ++++++++++++++++++++++++++++++++-------- 8 files changed, 376 insertions(+), 161 deletions(-) delete mode 100644 include/asm-sh/pgtable-2level.h (limited to 'arch') diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 27463e26a7b8..88e9663fc9fc 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -235,13 +235,22 @@ config MEMORY_SIZE config 32BIT bool "Support 32-bit physical addressing through PMB" - depends on CPU_SH4A && MMU + depends on CPU_SH4A && MMU && (!X2TLB || BROKEN) default y help If you say Y here, physical addressing will be extended to 32-bits through the SH-4A PMB. If this is not set, legacy 29-bit physical addressing will be used. +config X2TLB + bool "Enable extended TLB mode" + depends on CPU_SUBTYPE_SH7785 && MMU && EXPERIMENTAL + help + Selecting this option will enable the extended mode of the SH-X2 + TLB. For legacy SH-X behaviour and interoperability, say N. For + all of the fun new features and a willingless to submit bug reports, + say Y. + config VSYSCALL bool "Support vsyscall page" depends on MMU @@ -255,17 +264,53 @@ config VSYSCALL For systems with an MMU that can afford to give up a page, (the default value) say Y. +choice + prompt "Kernel page size" + default PAGE_SIZE_4KB + +config PAGE_SIZE_4KB + bool "4kB" + help + This is the default page size used by all SuperH CPUs. + +config PAGE_SIZE_8KB + bool "8kB" + depends on EXPERIMENTAL && X2TLB + help + This enables 8kB pages as supported by SH-X2 and later MMUs. + +config PAGE_SIZE_64KB + bool "64kB" + depends on EXPERIMENTAL && CPU_SH4 + help + This enables support for 64kB pages, possible on all SH-4 + CPUs and later. Highly experimental, not recommended. + +endchoice + choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && CPU_SH4 && MMU default HUGETLB_PAGE_SIZE_64K config HUGETLB_PAGE_SIZE_64K - bool "64K" + bool "64kB" + +config HUGETLB_PAGE_SIZE_256K + bool "256kB" + depends on X2TLB config HUGETLB_PAGE_SIZE_1MB bool "1MB" +config HUGETLB_PAGE_SIZE_4MB + bool "4MB" + depends on X2TLB + +config HUGETLB_PAGE_SIZE_64MB + bool "64MB" + depends on X2TLB + endchoice source "mm/Kconfig" diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 7154d1ce9785..8b275166f400 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -93,7 +93,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) pud = pud_offset(pgd, addr); if (pud_none(*pud)) { pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC); - set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE | _PAGE_USER)); + set_pud(pud, __pud(__pa(pmd) | _PAGE_TABLE)); if (pmd != pmd_offset(pud, 0)) { pud_ERROR(*pud); return; @@ -103,7 +103,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) pmd = pmd_offset(pud, addr); if (pmd_none(*pmd)) { pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); - set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE | _PAGE_USER)); + set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)); if (pte != pte_offset_kernel(pmd, 0)) { pmd_ERROR(*pmd); return; diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index a9fe80cfc233..11d54c149821 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -28,9 +28,7 @@ static inline void remap_area_pte(pte_t * pte, unsigned long address, { unsigned long end; unsigned long pfn; - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | flags); + pgprot_t pgprot = __pgprot(pgprot_val(PAGE_KERNEL_NOCACHE) | flags); address &= ~PMD_MASK; end = address + size; diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 07371ed7a313..e973ac3b13be 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -37,10 +37,6 @@ void clear_user_page(void *to, unsigned long address, struct page *page) if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) clear_page(to); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | - _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); pgd_t *pgd = pgd_offset_k(p3_addr); @@ -50,7 +46,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) pte_t entry; unsigned long flags; - entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); + entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); down(&p3map_sem[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); @@ -77,10 +73,6 @@ void copy_user_page(void *to, void *from, unsigned long address, if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) copy_page(to, from); else { - pgprot_t pgprot = __pgprot(_PAGE_PRESENT | - _PAGE_RW | _PAGE_CACHABLE | - _PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_HW_SHARED | _PAGE_FLAGS_HARD); unsigned long phys_addr = PHYSADDR(to); unsigned long p3_addr = P3SEG + (address & CACHE_ALIAS); pgd_t *pgd = pgd_offset_k(p3_addr); @@ -90,7 +82,7 @@ void copy_user_page(void *to, void *from, unsigned long address, pte_t entry; unsigned long flags; - entry = pfn_pte(phys_addr >> PAGE_SHIFT, pgprot); + entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); down(&p3map_sem[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index fc050fd7645e..43ca244564b1 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -74,7 +74,7 @@ typedef struct user_fpu_struct elf_fpregset_t; #define ELF_ARCH EM_SH #define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 +#define ELF_EXEC_PAGESIZE PAGE_SIZE /* This is the location that an ET_DYN program is loaded if exec'ed. Typical use of this is to invoke "./ld.so someprog" to test out a new version of diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index ca8b26d90475..380fd62dd05a 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -13,9 +13,16 @@ [ P4 control ] 0xE0000000 */ - /* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 +#if defined(CONFIG_PAGE_SIZE_4KB) +# define PAGE_SHIFT 12 +#elif defined(CONFIG_PAGE_SIZE_8KB) +# define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_64KB) +# define PAGE_SHIFT 16 +#else +# error "Bogus kernel page size?" +#endif #ifdef __ASSEMBLY__ #define PAGE_SIZE (1 << PAGE_SHIFT) @@ -28,8 +35,14 @@ #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) #define HPAGE_SHIFT 16 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +#define HPAGE_SHIFT 18 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) #define HPAGE_SHIFT 20 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HPAGE_SHIFT 22 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +#define HPAGE_SHIFT 26 #endif #ifdef CONFIG_HUGETLB_PAGE @@ -69,15 +82,25 @@ extern void __copy_user_page(void *to, void *from, void *orig_to); /* * These are used to make use of C type-checking.. */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pgd; } pgd_t; +#ifdef CONFIG_X2TLB +typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long long pgprot; } pgprot_t; +#define pte_val(x) \ + ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) +#define __pte(x) \ + ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) +#else +typedef struct { unsigned long pte_low; } pte_t; typedef struct { unsigned long pgprot; } pgprot_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#endif + +typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte) #define pgd_val(x) ((x).pgd) #define pgprot_val(x) ((x).pgprot) -#define __pte(x) ((pte_t) { (x) } ) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) diff --git a/include/asm-sh/pgtable-2level.h b/include/asm-sh/pgtable-2level.h deleted file mode 100644 index b525db6f61c6..000000000000 --- a/include/asm-sh/pgtable-2level.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __ASM_SH_PGTABLE_2LEVEL_H -#define __ASM_SH_PGTABLE_2LEVEL_H - -/* - * traditional two-level paging structure: - */ - -#define PGDIR_SHIFT 22 -#define PTRS_PER_PGD 1024 - -/* - * this is two-level, so we don't really have any - * PMD directory physically. - */ -#define PMD_SHIFT 22 -#define PTRS_PER_PMD 1 - -#define PTRS_PER_PTE 1024 - -#ifndef __ASSEMBLY__ -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear (pgd_t * pgdp) { } - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) (*(pteptr) = pteval) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) -#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval) - -#define pgd_page_vaddr(pgd) \ -((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) - -#define pgd_page(pgd) \ - (phys_to_page(pgd_val(pgd))) - -static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) -{ - return (pmd_t *) dir; -} - -#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#endif /* !__ASSEMBLY__ */ - -#endif /* __ASM_SH_PGTABLE_2LEVEL_H */ diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 2c8682ad1012..22c3d0b3e11a 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -15,15 +15,10 @@ #include #include -#define PTRS_PER_PGD 1024 - #ifndef __ASSEMBLY__ #include #include -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; -extern void paging_init(void); - /* * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. @@ -33,15 +28,28 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #endif /* !__ASSEMBLY__ */ -/* traditional two-level paging structure */ -#define PGDIR_SHIFT 22 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PTE 1024 -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) +/* + * traditional two-level paging structure + */ +/* PTE bits */ +#ifdef CONFIG_X2TLB +# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ +#else +# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ +#endif +#define PTE_SHIFT PAGE_SHIFT +#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) + +/* PGD bits */ +#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) +#define PGDIR_BITS (32 - PGDIR_SHIFT) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) +/* Entries per level */ +#define PTRS_PER_PTE (1UL << PTE_BITS) +#define PTRS_PER_PGD (1UL << PGDIR_BITS) + #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 @@ -57,7 +65,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; /* * Linux PTEL encoding. * - * Hardware and software bit definitions for the PTEL value: + * Hardware and software bit definitions for the PTEL value (see below for + * notes on SH-X2 MMUs and 64-bit PTEs): * * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). * @@ -76,20 +85,57 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; * * - Bits 31, 30, and 29 remain unused by everyone and can be used for future * software flags, although care must be taken to update _PAGE_CLEAR_FLAGS. + * + * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. + * + * SH-X2 MMUs and extended PTEs + * + * SH-X2 supports an extended mode TLB with split data arrays due to the + * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and + * SZ bit placeholders still exist in data array 1, but are implemented as + * reserved bits, with the real logic existing in data array 2. + * + * The downside to this is that we can no longer fit everything in to a 32-bit + * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus + * side, this gives us quite a few spare bits to play with for future usage. */ +/* Legacy and compat mode bits */ #define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ #define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ #define _PAGE_DIRTY 0x004 /* D-bit : page changed */ #define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ -#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ -#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ -#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed */ -#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#ifndef CONFIG_X2TLB +# define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +# define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +# define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +# define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#endif #define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ #define _PAGE_PROTNONE 0x200 /* software: if not present */ #define _PAGE_ACCESSED 0x400 /* software: page referenced */ #define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ +/* Extended mode bits */ +#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ +#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ +#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ +#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ + +#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ +#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ +#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ + +#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ +#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ +#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ + +/* Wrapper for extended mode pgprot twiddling */ +#ifdef CONFIG_X2TLB +# define _PAGE_EXT(x) ((unsigned long long)(x) << 32) +#else +# define _PAGE_EXT(x) (0) +#endif + /* software: moves to PTEA.TC (Timing Control) */ #define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ #define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ @@ -114,37 +160,165 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define _PAGE_FLAGS_HARDWARE_MASK (0x1fffffff & ~(_PAGE_CLEAR_FLAGS)) -/* Hardware flags: SZ0=1 (4k-byte) */ -#define _PAGE_FLAGS_HARD _PAGE_SZ0 +/* Hardware flags, page size encoding */ +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) +# elif defined(CONFIG_PAGE_SIZE_8KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) +# endif +#else +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ0 +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ1 +# endif +#endif -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE (_PAGE_SZ1) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) +# endif +#else +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_SZ1) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +# endif #endif -#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) +#define _PAGE_CHG_MASK \ + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) #ifndef __ASSEMBLY__ -#ifdef CONFIG_MMU -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_CACHABLE |_PAGE_ACCESSED | _PAGE_FLAGS_HARD) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_FLAGS_HARD) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) +#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ +#define _PAGE_TABLE \ + (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_EXT(_PAGE_EXT_USER_READ | _PAGE_EXT_USER_WRITE)) + +#define _KERNPG_TABLE \ + (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_KERN_WRITE)) + +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_USER_EXEC | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_USER_READ)) + +#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_USER_WRITE)) + +#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_USER_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_EXEC)) + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC) \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) + +#elif defined(CONFIG_MMU) /* SH-X TLB */ +#define _PAGE_TABLE \ + (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _KERNPG_TABLE \ + (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_EXECREAD PAGE_READONLY +#define PAGE_RWX PAGE_SHARED +#define PAGE_WRITEONLY PAGE_SHARED + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + #define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) -#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + #define PAGE_KERNEL_PCC(slot, type) \ - __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_FLAGS_HARD | (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | (type)) + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) #else /* no mmu */ #define PAGE_NONE __pgprot(0) #define PAGE_SHARED __pgprot(0) #define PAGE_COPY __pgprot(0) +#define PAGE_EXECREAD __pgprot(0) +#define PAGE_RWX __pgprot(0) #define PAGE_READONLY __pgprot(0) +#define PAGE_WRITEONLY __pgprot(0) #define PAGE_KERNEL __pgprot(0) #define PAGE_KERNEL_NOCACHE __pgprot(0) #define PAGE_KERNEL_RO __pgprot(0) @@ -154,27 +328,32 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #endif /* __ASSEMBLY__ */ /* - * As i386 and MIPS, SuperH can't do page protection for execute, and - * considers that the same as a read. Also, write permissions imply - * read permissions. This is the closest we can get.. + * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page + * protection for execute, and considers it the same as a read. Also, write + * permission implies read permission. This is the closest we can get.. + * + * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, + * not only supporting separate execute, read, and write bits, but having + * completely separate permission bits for user and kernel space. */ + /*xwr*/ #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY #define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY +#define __P100 PAGE_EXECREAD +#define __P101 PAGE_EXECREAD #define __P110 PAGE_COPY #define __P111 PAGE_COPY #define __S000 PAGE_NONE #define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED +#define __S010 PAGE_WRITEONLY #define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED +#define __S100 PAGE_EXECREAD +#define __S101 PAGE_EXECREAD +#define __S110 PAGE_RWX +#define __S111 PAGE_RWX #ifndef __ASSEMBLY__ @@ -183,7 +362,17 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; * within a page table are directly modified. Thus, the following * hook is made available. */ +#ifdef CONFIG_X2TLB +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#else #define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#endif + #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) /* @@ -192,13 +381,13 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; */ #define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) -#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) #define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) #define pte_none(x) (!pte_val(x)) #define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE)) -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) #define pmd_none(x) (!pmd_val(x)) #define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) @@ -212,28 +401,52 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; * The following only work if pte_present() is true. * Undefined behaviour if not.. */ -static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; } -static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_USER; } -static inline int pte_dirty(pte_t pte){ return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte){ return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_write(pte_t pte){ return pte_val(pte) & _PAGE_RW; } -static inline int pte_not_present(pte_t pte){ return !(pte_val(pte) & _PAGE_PRESENT); } - -static inline pte_t pte_rdprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; } -static inline pte_t pte_exprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_USER)); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } -static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW)); return pte; } -static inline pte_t pte_mkread(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; } -static inline pte_t pte_mkexec(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_USER)); return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW)); return pte; } -#ifdef CONFIG_HUGETLB_PAGE -static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } +#define pte_not_present(pte) (!(pte_val(pte) & _PAGE_PRESENT)) +#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY) +#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED) +#define pte_file(pte) (pte_val(pte) & _PAGE_FILE) + +#ifdef CONFIG_X2TLB +#define pte_read(pte) ((pte).pte_high & _PAGE_EXT_USER_READ) +#define pte_exec(pte) ((pte).pte_high & _PAGE_EXT_USER_EXEC) +#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#else +#define pte_read(pte) (pte_val(pte) & _PAGE_USER) +#define pte_exec(pte) (pte_val(pte) & _PAGE_USER) +#define pte_write(pte) (pte_val(pte) & _PAGE_RW) #endif +#define PTE_BIT_FUNC(h,fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } + +#ifdef CONFIG_X2TLB +/* + * We cheat a bit in the SH-X2 TLB case. As the permission bits are + * individually toggled (and user permissions are entirely decoupled from + * kernel permissions), we attempt to couple them a bit more sanely here. + */ +PTE_BIT_FUNC(high, rdprotect, &= ~_PAGE_EXT_USER_READ); +PTE_BIT_FUNC(high, mkread, |= _PAGE_EXT_USER_READ | _PAGE_EXT_KERN_READ); +PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); +PTE_BIT_FUNC(high, exprotect, &= ~_PAGE_EXT_USER_EXEC); +PTE_BIT_FUNC(high, mkexec, |= _PAGE_EXT_USER_EXEC | _PAGE_EXT_KERN_EXEC); +PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); +#else +PTE_BIT_FUNC(low, rdprotect, &= ~_PAGE_USER); +PTE_BIT_FUNC(low, mkread, |= _PAGE_USER); +PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); +PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); +PTE_BIT_FUNC(low, exprotect, &= ~_PAGE_USER); +PTE_BIT_FUNC(low, mkexec, |= _PAGE_USER); +PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); +#endif + +PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); + /* * Macro and implementation to make a page protection as uncachable. */ @@ -258,7 +471,11 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot) #define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } +{ + set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | + pgprot_val(newprot))); + return pte; +} #define pmd_page_vaddr(pmd) \ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) @@ -283,8 +500,15 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pte_unmap(pte) do { } while (0) #define pte_unmap_nested(pte) do { } while (0) +#ifdef CONFIG_X2TLB +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ + &(e), (e).pte_high, (e).pte_low) +#else #define pte_ERROR(e) \ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#endif + #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) @@ -337,6 +561,9 @@ extern unsigned int kobjsize(const void *objp); extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); #endif +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init(void); + #include #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 52e27782e1c4afa1feca0fdf194d279595e0431c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 21 Nov 2006 11:09:41 +0900 Subject: sh: p3map_sem sem2mutex conversion. Simple sem2mutex conversion for the p3map semaphores. Signed-off-by: Paul Mundt --- arch/sh/mm/cache-sh4.c | 14 +++++--------- arch/sh/mm/pg-sh4.c | 23 ++++++----------------- 2 files changed, 11 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index e48cc22724d9..7e62ba071d64 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -11,12 +11,8 @@ */ #include #include -#include -#include -#include -#include -#include -#include +#include +#include #include #include @@ -83,9 +79,9 @@ static void __init emit_cache_params(void) */ /* Worst case assumed to be 64k cache, direct-mapped i.e. 4 synonym bits. */ -#define MAX_P3_SEMAPHORES 16 +#define MAX_P3_MUTEXES 16 -struct semaphore p3map_sem[MAX_P3_SEMAPHORES]; +struct mutex p3map_mutex[MAX_P3_MUTEXES]; void __init p3_cache_init(void) { @@ -115,7 +111,7 @@ void __init p3_cache_init(void) panic("%s failed.", __FUNCTION__); for (i = 0; i < cpu_data->dcache.n_aliases; i++) - sema_init(&p3map_sem[i], 1); + mutex_init(&p3map_mutex[i]); } /* diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index e973ac3b13be..3f98d2a4f936 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -6,22 +6,12 @@ * * Released under the terms of the GNU GPL v2.0. */ -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include #include #include -extern struct semaphore p3map_sem[]; +extern struct mutex p3map_mutex[]; #define CACHE_ALIAS (cpu_data->dcache.alias_mask) @@ -47,7 +37,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) unsigned long flags; entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); - down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); __flush_tlb_page(get_asid(), p3_addr); @@ -55,7 +45,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page) update_mmu_cache(NULL, p3_addr, entry); __clear_user_page((void *)p3_addr, to); pte_clear(&init_mm, p3_addr, pte); - up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } @@ -83,7 +73,7 @@ void copy_user_page(void *to, void *from, unsigned long address, unsigned long flags; entry = pfn_pte(phys_addr >> PAGE_SHIFT, PAGE_KERNEL); - down(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_lock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); set_pte(pte, entry); local_irq_save(flags); __flush_tlb_page(get_asid(), p3_addr); @@ -91,7 +81,7 @@ void copy_user_page(void *to, void *from, unsigned long address, update_mmu_cache(NULL, p3_addr, entry); __copy_user_page((void *)p3_addr, from, to); pte_clear(&init_mm, p3_addr, pte); - up(&p3map_sem[(address & CACHE_ALIAS)>>12]); + mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]); } } @@ -114,4 +104,3 @@ inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t } return pte; } - -- cgit v1.2.3 From 53644087a607040a56d883df612b588814a56f11 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 21 Nov 2006 11:12:19 +0900 Subject: sh: Explicit endian selection support. Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 16 ++++++++++++---- arch/sh/Makefile | 19 +++++++++---------- 2 files changed, 21 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b95dbb8db661..d62183f355a3 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -294,12 +294,20 @@ config CF_BASE_ADDR menu "Processor features" -config CPU_LITTLE_ENDIAN - bool "Little Endian" +choice + prompt "Endianess selection" + default CPU_LITTLE_ENDIAN help Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. Say Y if - your machine is little endian, N if it's a big endian machine. + endian byte order. These modes require different kernels. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + +config CPU_BIG_ENDIAN + bool "Big Endian" + +endchoice config SH_FPU bool "FPU support" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index dc43984bd4be..6b3af5ce66a2 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -13,10 +13,6 @@ # for "archclean" and "archdep" for cleaning up and making dependencies for # this architecture # - -cflags-y := -mb -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml - isa-y := any isa-$(CONFIG_SH_DSP) := sh isa-$(CONFIG_CPU_SH2) := sh2 @@ -38,13 +34,16 @@ isa-y := $(isa-y)-nofpu endif endif -cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) - -cflags-$(CONFIG_CPU_SH2) += -m2 -cflags-$(CONFIG_CPU_SH3) += -m3 -cflags-$(CONFIG_CPU_SH4) += -m4 \ +cflags-$(CONFIG_CPU_SH2) := -m2 +cflags-$(CONFIG_CPU_SH3) := -m3 +cflags-$(CONFIG_CPU_SH4) := -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) -cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a-nofpu,) +cflags-$(CONFIG_CPU_SH4A) := -m4a $(call cc-option,-m4a-nofpu,) + +cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml + +cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) cflags-$(CONFIG_SH_DSP) += -Wa,-dsp cflags-$(CONFIG_SH_KGDB) += -g -- cgit v1.2.3 From f0bc814cfbc212683c882e58b3d1afec6b3e3aa3 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 21 Nov 2006 11:16:57 +0900 Subject: sh: gcc4 support. This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/Makefile | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 18 ++++++++------- arch/sh/kernel/irq.c | 5 +++-- arch/sh/kernel/process.c | 32 +++++++++++++++------------ arch/sh/kernel/sh_ksyms.c | 2 -- arch/sh/kernel/signal.c | 26 ++++++++++++---------- arch/sh/kernel/sys_sh.c | 5 +++-- arch/sh/kernel/traps.c | 52 ++++++++++++++++++++++++-------------------- 8 files changed, 78 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 6b3af5ce66a2..7f4516c3f83d 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -43,7 +43,7 @@ cflags-$(CONFIG_CPU_SH4A) := -m4a $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml -cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) +cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding cflags-$(CONFIG_SH_DSP) += -Wa,-dsp cflags-$(CONFIG_SH_KGDB) += -g diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index f486c07e10e2..378b488237c9 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -296,16 +296,17 @@ ieee_fpe_handler (struct pt_regs *regs) } asmlinkage void -do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) +do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; - if (ieee_fpe_handler (®s)) + if (ieee_fpe_handler(regs)) return; - regs.pc += 2; - save_fpu(tsk, ®s); + regs->pc += 2; + save_fpu(tsk, regs); tsk->thread.trap_no = 11; tsk->thread.error_code = 0; force_sig(SIGFPE, tsk); @@ -313,12 +314,13 @@ do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs regs) + unsigned long r7, struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; - grab_fpu(®s); - if (!user_mode(®s)) { + grab_fpu(regs); + if (!user_mode(regs)) { printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); return; } diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 944128ce9706..edf4d2d21336 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -84,9 +84,10 @@ static union irq_ctx *softirq_ctx[NR_CPUS]; asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct pt_regs *old_regs = set_irq_regs(®s); + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct pt_regs *old_regs = set_irq_regs(regs); int irq; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index a52b13ac6b7f..f3e2631be144 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -385,10 +385,11 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne asmlinkage int sys_fork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); #ifdef CONFIG_MMU - return do_fork(SIGCHLD, regs.regs[15], ®s, 0, NULL, NULL); + return do_fork(SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); #else /* fork almost works, enough to trick you into looking elsewhere :-( */ return -EINVAL; @@ -398,11 +399,12 @@ asmlinkage int sys_fork(unsigned long r4, unsigned long r5, asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, unsigned long parent_tidptr, unsigned long child_tidptr, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); if (!newsp) - newsp = regs.regs[15]; - return do_fork(clone_flags, newsp, ®s, 0, + newsp = regs->regs[15]; + return do_fork(clone_flags, newsp, regs, 0, (int __user *)parent_tidptr, (int __user *)child_tidptr); } @@ -418,9 +420,10 @@ asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, */ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.regs[15], ®s, + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->regs[15], regs, 0, NULL, NULL); } @@ -429,8 +432,9 @@ asmlinkage int sys_vfork(unsigned long r4, unsigned long r5, */ asmlinkage int sys_execve(char *ufilename, char **uargv, char **uenvp, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int error; char *filename; @@ -442,7 +446,7 @@ asmlinkage int sys_execve(char *ufilename, char **uargv, error = do_execve(filename, (char __user * __user *)uargv, (char __user * __user *)uenvp, - ®s); + regs); if (error == 0) { task_lock(current); current->ptrace &= ~PT_DTRACE; @@ -472,9 +476,7 @@ unsigned long get_wchan(struct task_struct *p) return pc; } -asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs regs) +asmlinkage void break_point_trap(void) { /* Clear tracing. */ #if defined(CONFIG_CPU_SH4A) @@ -492,8 +494,10 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, asmlinkage void break_point_trap_software(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - regs.pc -= 2; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + regs->pc -= 2; force_sig(SIGTRAP, current); } diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 8a2fd19dc9eb..c706f3bfd897 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -73,8 +73,6 @@ DECLARE_EXPORT(__lshrdi3); DECLARE_EXPORT(__movstr); DECLARE_EXPORT(__movstrSI16); -EXPORT_SYMBOL(strcpy); - #ifdef CONFIG_CPU_SH4 DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 764886b4bcf1..50d7c4993bef 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -37,7 +37,7 @@ asmlinkage int sys_sigsuspend(old_sigset_t mask, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); @@ -52,7 +52,7 @@ sys_sigsuspend(old_sigset_t mask, return -ERESTARTNOHAND; } -asmlinkage int +asmlinkage int sys_sigaction(int sig, const struct old_sigaction __user *act, struct old_sigaction __user *oact) { @@ -87,9 +87,11 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - return do_sigaltstack(uss, uoss, regs.regs[15]); + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + + return do_sigaltstack(uss, uoss, regs->regs[15]); } @@ -198,9 +200,10 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct sigframe __user *frame = (struct sigframe __user *)regs.regs[15]; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct sigframe __user *frame = (struct sigframe __user *)regs->regs[15]; sigset_t set; int r0; @@ -220,7 +223,7 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->sc, &r0)) + if (restore_sigcontext(regs, &frame->sc, &r0)) goto badframe; return r0; @@ -231,9 +234,10 @@ badframe: asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { - struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs.regs[15]; + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->regs[15]; sigset_t set; stack_t st; int r0; @@ -250,14 +254,14 @@ asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5, recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(®s, &frame->uc.uc_mcontext, &r0)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) goto badframe; if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs.regs[15]); + do_sigaltstack(&st, NULL, regs->regs[15]); return r0; diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 07f2b5718938..5083b6ed4b39 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -33,14 +33,15 @@ */ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int fd[2]; int error; error = do_pipe(fd); if (!error) { - regs.regs[1] = fd[1]; + regs->regs[1] = fd[1]; return fd[0]; } return error; diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index f558748d7543..b52037bc1255 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -23,8 +23,8 @@ #ifdef CONFIG_SH_KGDB #include -#define CHK_REMOTE_DEBUG(regs) \ -{ \ +#define CHK_REMOTE_DEBUG(regs) \ +{ \ if (kgdb_debug_hook && !user_mode(regs))\ (*kgdb_debug_hook)(regs); \ } @@ -501,7 +501,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) /* * Handle various address error exceptions */ -asmlinkage void do_address_error(struct pt_regs *regs, +asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, unsigned long address) { @@ -588,7 +588,7 @@ int is_dsp_inst(struct pt_regs *regs) { unsigned short inst; - /* + /* * Safe guard if DSP mode is already enabled or we're lacking * the DSP altogether. */ @@ -612,8 +612,9 @@ int is_dsp_inst(struct pt_regs *regs) #ifdef CONFIG_CPU_SH2A asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); siginfo_t info; current->thread.trap_no = r4; @@ -635,12 +636,13 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, /* arch/sh/kernel/cpu/sh4/fpu.c */ extern int do_fpu_inst(unsigned short, struct pt_regs *); extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, struct pt_regs regs); + unsigned long r6, unsigned long r7, struct pt_regs __regs); asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); unsigned long error_code; struct task_struct *tsk = current; @@ -648,11 +650,11 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned short inst = 0; int err; - get_user(inst, (unsigned short*)regs.pc); + get_user(inst, (unsigned short*)regs->pc); - err = do_fpu_inst(inst, ®s); + err = do_fpu_inst(inst, regs); if (!err) { - regs.pc += 2; + regs->pc += 2; return; } /* not a FPU inst. */ @@ -660,9 +662,9 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, #ifdef CONFIG_SH_DSP /* Check if it's a DSP instruction */ - if (is_dsp_inst(®s)) { + if (is_dsp_inst(regs)) { /* Enable DSP mode, and restart instruction. */ - regs.sr |= SR_DSP; + regs->sr |= SR_DSP; return; } #endif @@ -672,9 +674,9 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, local_irq_enable(); tsk->thread.error_code = error_code; tsk->thread.trap_no = TRAP_RESERVED_INST; - CHK_REMOTE_DEBUG(®s); + CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); - die_if_no_fixup("reserved instruction", ®s, error_code); + die_if_no_fixup("reserved instruction", regs, error_code); } #ifdef CONFIG_SH_FPU_EMU @@ -722,17 +724,18 @@ static int emulate_branch(unsigned short inst, struct pt_regs* regs) asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); unsigned long error_code; struct task_struct *tsk = current; #ifdef CONFIG_SH_FPU_EMU unsigned short inst = 0; - get_user(inst, (unsigned short *)regs.pc + 1); - if (!do_fpu_inst(inst, ®s)) { - get_user(inst, (unsigned short *)regs.pc); - if (!emulate_branch(inst, ®s)) + get_user(inst, (unsigned short *)regs->pc + 1); + if (!do_fpu_inst(inst, regs)) { + get_user(inst, (unsigned short *)regs->pc); + if (!emulate_branch(inst, regs)) return; /* fault in branch.*/ } @@ -744,19 +747,20 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, local_irq_enable(); tsk->thread.error_code = error_code; tsk->thread.trap_no = TRAP_RESERVED_INST; - CHK_REMOTE_DEBUG(®s); + CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); - die_if_no_fixup("illegal slot instruction", ®s, error_code); + die_if_no_fixup("illegal slot instruction", regs, error_code); } asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs) + struct pt_regs __regs) { + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); long ex; lookup_exception_vector(ex); - die_if_kernel("exception", ®s, ex); + die_if_kernel("exception", regs, ex); } #if defined(CONFIG_SH_STANDARD_BIOS) @@ -809,7 +813,7 @@ void *set_exception_table_vec(unsigned int vec, void *handler) extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, - struct pt_regs regs); + struct pt_regs __regs); void __init trap_init(void) { -- cgit v1.2.3 From b5a1bcbee434b843c8850a968d9a6c7541f1be9d Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 21 Nov 2006 13:34:04 +0900 Subject: sh: Set up correct siginfo structures for page faults. Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/fpu.c | 7 +---- arch/sh/kernel/traps.c | 74 ++++++++++++++++++++++++-------------------- arch/sh/mm/fault.c | 26 ++++++++++------ include/asm-sh/processor.h | 12 ++----- 4 files changed, 61 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 378b488237c9..7624677f6628 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -282,11 +282,8 @@ ieee_fpe_handler (struct pt_regs *regs) grab_fpu(regs); restore_fpu(tsk); set_tsk_thread_flag(tsk, TIF_USEDFPU); - } else { - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; + } else force_sig(SIGFPE, tsk); - } regs->pc = nextpc; return 1; @@ -307,8 +304,6 @@ do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, regs->pc += 2; save_fpu(tsk, regs); - tsk->thread.trap_no = 11; - tsk->thread.error_code = 0; force_sig(SIGFPE, tsk); } diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index b52037bc1255..0ee298079d82 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -93,7 +93,7 @@ void die(const char * str, struct pt_regs * regs, long err) if (!user_mode(regs) || in_interrupt()) dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + - (unsigned long)task_stack_page(current)); + (unsigned long)task_stack_page(current)); bust_spinlocks(0); spin_unlock_irq(&die_lock); @@ -201,7 +201,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) if (copy_to_user(dst,src,4)) goto fetch_fault; ret = 0; - break; + break; case 2: /* mov.[bwl] to memory, possibly with pre-decrement */ if (instruction & 4) @@ -225,7 +225,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) if (copy_from_user(dst,src,4)) goto fetch_fault; ret = 0; - break; + break; case 6: /* mov.[bwl] from memory, possibly with post-increment */ src = (unsigned char*) *rm; @@ -233,7 +233,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) *rm += count; dst = (unsigned char*) rn; *(unsigned long*)dst = 0; - + #ifdef __LITTLE_ENDIAN__ if (copy_from_user(dst, src, count)) goto fetch_fault; @@ -244,7 +244,7 @@ static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) } #else dst += 4-count; - + if (copy_from_user(dst, src, count)) goto fetch_fault; @@ -323,7 +323,8 @@ static inline int handle_unaligned_delayslot(struct pt_regs *regs) return -EFAULT; /* kernel */ - die("delay-slot-insn faulting in handle_unaligned_delayslot", regs, 0); + die("delay-slot-insn faulting in handle_unaligned_delayslot", + regs, 0); } return handle_unaligned_ins(instruction,regs); @@ -364,7 +365,8 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) if (user_mode(regs) && handle_unaligned_notify_count>0) { handle_unaligned_notify_count--; - printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + printk(KERN_NOTICE "Fixing up unaligned userspace access " + "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", current->comm,current->pid,(u16*)regs->pc,instruction); } @@ -499,7 +501,15 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) #endif /* - * Handle various address error exceptions + * Handle various address error exceptions: + * - instruction address error: + * misaligned PC + * PC >= 0x80000000 in user mode + * - data address error (read and write) + * misaligned data access + * access to >= 0x80000000 is user mode + * Unfortuntaly we can't distinguish between instruction address error + * and data address errors caused by read acceses. */ asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, @@ -507,6 +517,7 @@ asmlinkage void do_address_error(struct pt_regs *regs, { unsigned long error_code = 0; mm_segment_t oldfs; + siginfo_t info; #ifndef CONFIG_CPU_SH2A u16 instruction; int tmp; @@ -520,22 +531,15 @@ asmlinkage void do_address_error(struct pt_regs *regs, oldfs = get_fs(); if (user_mode(regs)) { + int si_code = BUS_ADRERR; + local_irq_enable(); - current->thread.error_code = error_code; -#ifdef CONFIG_CPU_SH2 - /* - * On the SH-2, we only have a single vector for address - * errors, there's no differentiating between a load error - * and a store error. - */ - current->thread.trap_no = 9; -#else - current->thread.trap_no = (writeaccess) ? 8 : 7; -#endif /* bad PC is not something we can fix */ - if (regs->pc & 1) + if (regs->pc & 1) { + si_code = BUS_ADRALN; goto uspace_segv; + } #ifndef CONFIG_CPU_SH2A set_fs(USER_DS); @@ -554,9 +558,16 @@ asmlinkage void do_address_error(struct pt_regs *regs, return; /* sorted */ #endif - uspace_segv: - printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); - force_sig(SIGSEGV, current); +uspace_segv: + printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned " + "access (PC %lx PR %lx)\n", current->comm, regs->pc, + regs->pr); + + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void *) address; + force_sig_info(SIGBUS, &info, current); } else { if (regs->pc & 1) die("unaligned program counter", regs, error_code); @@ -574,7 +585,9 @@ asmlinkage void do_address_error(struct pt_regs *regs, handle_unaligned_access(instruction, regs); set_fs(oldfs); #else - printk(KERN_NOTICE "Killing process \"%s\" due to unaligned access\n", current->comm); + printk(KERN_NOTICE "Killing process \"%s\" due to unaligned " + "access\n", current->comm); + force_sig(SIGSEGV, current); #endif } @@ -617,9 +630,6 @@ asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, struct pt_regs *regs = RELOC_HIDE(&__regs, 0); siginfo_t info; - current->thread.trap_no = r4; - current->thread.error_code = 0; - switch (r4) { case TRAP_DIVZERO_ERROR: info.si_code = FPE_INTDIV; @@ -662,7 +672,7 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, #ifdef CONFIG_SH_DSP /* Check if it's a DSP instruction */ - if (is_dsp_inst(regs)) { + if (is_dsp_inst(regs)) { /* Enable DSP mode, and restart instruction. */ regs->sr |= SR_DSP; return; @@ -672,8 +682,6 @@ asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, lookup_exception_vector(error_code); local_irq_enable(); - tsk->thread.error_code = error_code; - tsk->thread.trap_no = TRAP_RESERVED_INST; CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); die_if_no_fixup("reserved instruction", regs, error_code); @@ -745,8 +753,6 @@ asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, lookup_exception_vector(error_code); local_irq_enable(); - tsk->thread.error_code = error_code; - tsk->thread.trap_no = TRAP_RESERVED_INST; CHK_REMOTE_DEBUG(regs); force_sig(SIGILL, tsk); die_if_no_fixup("illegal slot instruction", regs, error_code); @@ -805,7 +811,7 @@ void *set_exception_table_vec(unsigned int vec, void *handler) { extern void *exception_handling_table[]; void *old_handler; - + old_handler = exception_handling_table[vec]; exception_handling_table[vec] = handler; return old_handler; @@ -841,7 +847,7 @@ void __init trap_init(void) set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); #endif - + /* Setup VBR for boot cpu */ per_cpu_trap_init(); } diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 68663b8f99ae..43bed2cb00e3 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -26,13 +26,16 @@ extern void die(const char *,struct pt_regs *,long); * and the problem, and then passes it off to one of the appropriate * routines. */ -asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, - unsigned long address) +asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) { struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct * vma; unsigned long page; + int si_code; + siginfo_t info; #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) @@ -41,6 +44,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, tsk = current; mm = tsk->mm; + si_code = SEGV_MAPERR; /* * If we're in an interrupt or have no user @@ -65,6 +69,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, * we can handle it.. */ good_area: + si_code = SEGV_ACCERR; if (writeaccess) { if (!(vma->vm_flags & VM_WRITE)) goto bad_area; @@ -105,9 +110,11 @@ bad_area: up_read(&mm->mmap_sem); if (user_mode(regs)) { - tsk->thread.address = address; - tsk->thread.error_code = writeaccess; - force_sig(SIGSEGV, tsk); + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void *) address; + force_sig_info(SIGSEGV, &info, tsk); return; } @@ -166,10 +173,11 @@ do_sigbus: * Send a sigbus, regardless of whether we were in kernel * or user mode. */ - tsk->thread.address = address; - tsk->thread.error_code = writeaccess; - tsk->thread.trap_no = 14; - force_sig(SIGBUS, tsk); + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRERR; + info.si_addr = (void *)address; + force_sig_info(SIGBUS, &info, tsk); /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index da22ac30c75f..4a90e7cd8199 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -136,12 +136,11 @@ union sh_fpu_union { }; struct thread_struct { + /* Saved registers when thread is descheduled */ unsigned long sp; unsigned long pc; - unsigned long trap_no, error_code; - unsigned long address; - /* Hardware debugging registers may come here */ + /* Hardware debugging registers */ unsigned long ubc_pc; /* floating point info */ @@ -156,12 +155,7 @@ typedef struct { extern int ubc_usercnt; #define INIT_THREAD { \ - sizeof(init_stack) + (long) &init_stack, /* sp */ \ - 0, /* pc */ \ - 0, 0, \ - 0, \ - 0, \ - {{{0,}},} /* fpu state */ \ + .sp = sizeof(init_stack) + (long) &init_stack, \ } /* -- cgit v1.2.3 From 6e4662ff49c6b94e16a47bfddb920576963b5a20 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 21 Nov 2006 13:53:44 +0900 Subject: sh: Use MMU.TTB register as pointer to current pgd. Add TTB accessor functions and give it a sensible default value. We will use this later for optimizing the fault path. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/init.c | 18 ++++++++---------- include/asm-sh/mmu_context.h | 44 +++++++++++++++++++++++--------------------- 2 files changed, 31 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8b275166f400..8c8d39118387 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -155,9 +155,6 @@ extern char __init_begin, __init_end; /* * paging_init() sets up the page tables - * - * This routines also unmaps the page at virtual kernel address 0, so - * that we can trap those pesky NULL-reference errors in the kernel. */ void __init paging_init(void) { @@ -180,14 +177,11 @@ void __init paging_init(void) */ { unsigned long max_dma, low, start_pfn; - pgd_t *pg_dir; - int i; - - /* We don't need kernel mapping as hardware support that. */ - pg_dir = swapper_pg_dir; - for (i = 0; i < PTRS_PER_PGD; i++) - pgd_val(pg_dir[i]) = 0; + /* We don't need to map the kernel through the TLB, as + * it is permanatly mapped using P1. So clear the + * entire pgd. */ + memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir)); /* Turn on the MMU */ enable_mmu(); @@ -206,6 +200,10 @@ void __init paging_init(void) } } + /* Set an initial value for the MMU.TTB so we don't have to + * check for a null value. */ + set_TTB(swapper_pg_dir); + #elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) /* * If we don't have CONFIG_MMU set and the processor in question diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index c7088efe579a..46f04e23bd45 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -10,7 +10,6 @@ #include #include -#include #include #include @@ -42,10 +41,8 @@ extern unsigned long mmu_context_cache; /* * Get MMU context if needed. */ -static __inline__ void -get_mmu_context(struct mm_struct *mm) +static inline void get_mmu_context(struct mm_struct *mm) { - extern void flush_tlb_all(void); unsigned long mc = mmu_context_cache; /* Check if we have old version of context. */ @@ -61,6 +58,7 @@ get_mmu_context(struct mm_struct *mm) * Flush all TLB and start new cycle. */ flush_tlb_all(); + /* * Fix version; Note that we avoid version #0 * to distingush NO_CONTEXT. @@ -75,11 +73,10 @@ get_mmu_context(struct mm_struct *mm) * Initialize the context related info for a new mm_struct * instance. */ -static __inline__ int init_new_context(struct task_struct *tsk, +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { mm->context.id = NO_CONTEXT; - return 0; } @@ -87,12 +84,12 @@ static __inline__ int init_new_context(struct task_struct *tsk, * Destroy context related info for an mm_struct that is about * to be put to rest. */ -static __inline__ void destroy_context(struct mm_struct *mm) +static inline void destroy_context(struct mm_struct *mm) { /* Do nothing */ } -static __inline__ void set_asid(unsigned long asid) +static inline void set_asid(unsigned long asid) { unsigned long __dummy; @@ -105,7 +102,7 @@ static __inline__ void set_asid(unsigned long asid) "r" (0xffffff00)); } -static __inline__ unsigned long get_asid(void) +static inline unsigned long get_asid(void) { unsigned long asid; @@ -120,24 +117,29 @@ static __inline__ unsigned long get_asid(void) * After we have set current->mm to a new value, this activates * the context for the new mm so we see the new mappings. */ -static __inline__ void activate_context(struct mm_struct *mm) +static inline void activate_context(struct mm_struct *mm) { get_mmu_context(mm); set_asid(mm->context.id & MMU_CONTEXT_ASID_MASK); } -/* MMU_TTB can be used for optimizing the fault handling. - (Currently not used) */ -static __inline__ void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) +/* MMU_TTB is used for optimizing the fault handling. */ +static inline void set_TTB(pgd_t *pgd) { - if (likely(prev != next)) { - unsigned long __pgdir = (unsigned long)next->pgd; + ctrl_outl((unsigned long)pgd, MMU_TTB); +} - __asm__ __volatile__("mov.l %0, %1" - : /* no output */ - : "r" (__pgdir), "m" (__m(MMU_TTB))); +static inline pgd_t *get_TTB(void) +{ + return (pgd_t *)ctrl_inl(MMU_TTB); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + if (likely(prev != next)) { + set_TTB(next->pgd); activate_context(next); } } @@ -147,7 +149,7 @@ static __inline__ void switch_mm(struct mm_struct *prev, #define activate_mm(prev, next) \ switch_mm((prev),(next),NULL) -static __inline__ void +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } -- cgit v1.2.3 From 99a596f93be10001c50894bcab69e458a49a3b8c Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 21 Nov 2006 15:38:05 +0900 Subject: sh: pmd rework. Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/fault.c | 40 ++++++++++++++++++++++++++++++++++++++++ arch/sh/mm/init.c | 26 +++++++++----------------- include/asm-sh/pgalloc.h | 20 ++++++++++++++++---- include/asm-sh/pgtable.h | 38 +++++++++++--------------------------- 4 files changed, 76 insertions(+), 48 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 43bed2cb00e3..128907ef7fcd 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -46,6 +46,45 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, mm = tsk->mm; si_code = SEGV_MAPERR; + if (unlikely(address >= TASK_SIZE)) { + /* + * Synchronize this task's top level page-table + * with the 'reference' page table. + * + * Do _not_ use "tsk" here. We might be inside + * an interrupt in the middle of a task switch.. + */ + int offset = pgd_index(address); + pgd_t *pgd, *pgd_k; + pud_t *pud, *pud_k; + pmd_t *pmd, *pmd_k; + + pgd = get_TTB() + offset; + pgd_k = swapper_pg_dir + offset; + + /* This will never happen with the folded page table. */ + if (!pgd_present(*pgd)) { + if (!pgd_present(*pgd_k)) + goto bad_area_nosemaphore; + set_pgd(pgd, *pgd_k); + return; + } + + pud = pud_offset(pgd, address); + pud_k = pud_offset(pgd_k, address); + if (pud_present(*pud) || !pud_present(*pud_k)) + goto bad_area_nosemaphore; + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); + if (pmd_present(*pmd) || !pmd_present(*pmd_k)) + goto bad_area_nosemaphore; + set_pmd(pmd, *pmd_k); + + return; + } + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -109,6 +148,7 @@ survive: bad_area: up_read(&mm->mmap_sem); +bad_area_nosemaphore: if (user_mode(regs)) { info.si_signo = SIGSEGV; info.si_errno = 0; diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8c8d39118387..462bfeac6d9c 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -84,30 +84,22 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) pmd_t *pmd; pte_t *pte; - pgd = swapper_pg_dir + pgd_index(addr); + pgd = pgd_offset_k(addr); if (pgd_none(*pgd)) { pgd_ERROR(*pgd); return; } - pud = pud_offset(pgd, addr); - if (pud_none(*pud)) { - pmd = (pmd_t *)get_zeroed_page(GFP_ATOMIC); - set_pud(pud, __pud(__pa(pmd) | _PAGE_TABLE)); - if (pmd != pmd_offset(pud, 0)) { - pud_ERROR(*pud); - return; - } + pud = pud_alloc(NULL, pgd, addr); + if (unlikely(!pud)) { + pud_ERROR(*pud); + return; } - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) { - pte = (pte_t *)get_zeroed_page(GFP_ATOMIC); - set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE)); - if (pte != pte_offset_kernel(pmd, 0)) { - pmd_ERROR(*pmd); - return; - } + pmd = pmd_alloc(NULL, pud, addr); + if (unlikely(!pmd)) { + pmd_ERROR(*pmd); + return; } pte = pte_offset_kernel(pmd, addr); diff --git a/include/asm-sh/pgalloc.h b/include/asm-sh/pgalloc.h index e841465ab4d2..888e4529e6fe 100644 --- a/include/asm-sh/pgalloc.h +++ b/include/asm-sh/pgalloc.h @@ -1,13 +1,16 @@ #ifndef __ASM_SH_PGALLOC_H #define __ASM_SH_PGALLOC_H -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte) { - set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte))); + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); } /* @@ -15,7 +18,16 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); + pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT); + + if (pgd) { + memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t)); + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); + } + + return pgd; } static inline void pgd_free(pgd_t *pgd) diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index 22c3d0b3e11a..b1f21e765640 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -203,26 +203,18 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #ifndef __ASSEMBLY__ #if defined(CONFIG_X2TLB) /* SH-X2 TLB */ -#define _PAGE_TABLE \ - (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_EXT(_PAGE_EXT_USER_READ | _PAGE_EXT_USER_WRITE)) - -#define _KERNPG_TABLE \ - (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_EXT(_PAGE_EXT_KERN_READ | _PAGE_EXT_KERN_WRITE)) - #define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ _PAGE_ACCESSED | _PAGE_FLAGS_HARD) #define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_USER_READ | \ - _PAGE_EXT_USER_WRITE)) + _PAGE_EXT_USER_WRITE)) #define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_USER_EXEC | \ - _PAGE_EXT_USER_READ)) + _PAGE_EXT_USER_READ)) #define PAGE_COPY PAGE_EXECREAD @@ -237,14 +229,14 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_USER_WRITE | \ - _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_READ | \ _PAGE_EXT_USER_EXEC)) #define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ _PAGE_DIRTY | _PAGE_ACCESSED | \ _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_WRITE | \ _PAGE_EXT_KERN_EXEC)) #define PAGE_KERNEL_NOCACHE \ @@ -252,30 +244,25 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; _PAGE_ACCESSED | _PAGE_HW_SHARED | \ _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_WRITE | \ _PAGE_EXT_KERN_EXEC)) #define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ _PAGE_DIRTY | _PAGE_ACCESSED | \ _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_EXEC)) + _PAGE_EXT_KERN_EXEC)) #define PAGE_KERNEL_PCC(slot, type) \ __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ _PAGE_EXT(_PAGE_EXT_KERN_READ | \ - _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_WRITE | \ _PAGE_EXT_KERN_EXEC) \ (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ (type)) #elif defined(CONFIG_MMU) /* SH-X TLB */ -#define _PAGE_TABLE \ - (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _KERNPG_TABLE \ - (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) - #define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ _PAGE_ACCESSED | _PAGE_FLAGS_HARD) @@ -390,9 +377,9 @@ static inline void set_pte(pte_t *ptep, pte_t pte) #define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) #define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) +#define pmd_present(x) (pmd_val(x)) #define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) #define pte_page(x) phys_to_page(pte_val(x)&PTE_PHYS_MASK) @@ -477,11 +464,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) return pte; } -#define pmd_page_vaddr(pmd) \ -((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#define pmd_page(pmd) \ - (phys_to_page(pmd_val(pmd))) +#define pmd_page_vaddr(pmd) pmd_val(pmd) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) /* to find an entry in a page-table-directory. */ #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -- cgit v1.2.3 From 9f5e8eee5cfe1328660c71812d87c2a67bda389f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 11:22:57 +0900 Subject: sh: generic push-switch framework. This adds support for a generic push switch framework. Adaptable for various switches, including GPIO switches and the push switches commonly found on Renesas debug boards. This allows switch states to be trivially reported through sysfs. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 + arch/sh/drivers/Kconfig | 9 +++ arch/sh/drivers/Makefile | 2 +- arch/sh/drivers/push-switch.c | 138 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/push-switch.h | 28 +++++++++ 5 files changed, 178 insertions(+), 1 deletion(-) create mode 100644 arch/sh/drivers/Kconfig create mode 100644 arch/sh/drivers/push-switch.c create mode 100644 include/asm-sh/push-switch.h (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index d62183f355a3..a03f155571c8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -473,6 +473,8 @@ config HEARTBEAT behavior is platform-dependent, but normally the flash frequency is a hyperbolic function of the 5-minute load average. +source "arch/sh/drivers/Kconfig" + endmenu config ISA_DMA_API diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig new file mode 100644 index 000000000000..c54c758e6243 --- /dev/null +++ b/arch/sh/drivers/Kconfig @@ -0,0 +1,9 @@ +menu "Additional SuperH Device Drivers" + +config PUSH_SWITCH + tristate "Push switch support" + help + This enables support for the push switch framework, a simple + framework that allows for sysfs driven switch status reporting. + +endmenu diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile index 338c3729d270..bf18dbfb6787 100644 --- a/arch/sh/drivers/Makefile +++ b/arch/sh/drivers/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_PCI) += pci/ obj-$(CONFIG_SH_DMA) += dma/ obj-$(CONFIG_SUPERHYWAY) += superhyway/ - +obj-$(CONFIG_PUSH_SWITCH) += push-switch.o diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c new file mode 100644 index 000000000000..f2b9157c314f --- /dev/null +++ b/arch/sh/drivers/push-switch.c @@ -0,0 +1,138 @@ +/* + * Generic push-switch framework + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +#define DRV_NAME "push-switch" +#define DRV_VERSION "0.1.0" + +static ssize_t switch_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct push_switch_platform_info *psw_info = dev->platform_data; + return sprintf(buf, "%s\n", psw_info->name); +} +static DEVICE_ATTR(switch, S_IRUGO, switch_show, NULL); + +static void switch_timer(unsigned long data) +{ + struct push_switch *psw = (struct push_switch *)data; + + schedule_work(&psw->work); +} + +static void switch_work_handler(void *data) +{ + struct platform_device *pdev = data; + struct push_switch *psw = platform_get_drvdata(pdev); + + psw->state = 0; + + kobject_uevent(&pdev->dev.kobj, KOBJ_CHANGE); +} + +static int switch_drv_probe(struct platform_device *pdev) +{ + struct push_switch_platform_info *psw_info; + struct push_switch *psw; + int ret, irq; + + psw = kzalloc(sizeof(struct push_switch), GFP_KERNEL); + if (unlikely(!psw)) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) { + ret = -ENODEV; + goto err; + } + + psw_info = pdev->dev.platform_data; + BUG_ON(!psw_info); + + ret = request_irq(irq, psw_info->irq_handler, + IRQF_DISABLED | psw_info->irq_flags, + psw_info->name ? psw_info->name : DRV_NAME, pdev); + if (unlikely(ret < 0)) + goto err; + + if (psw_info->name) { + ret = device_create_file(&pdev->dev, &dev_attr_switch); + if (unlikely(ret)) { + dev_err(&pdev->dev, "Failed creating device attrs\n"); + ret = -EINVAL; + goto err_irq; + } + } + + INIT_WORK(&psw->work, switch_work_handler, pdev); + init_timer(&psw->debounce); + + psw->debounce.function = switch_timer; + psw->debounce.data = (unsigned long)psw; + + platform_set_drvdata(pdev, psw); + + return 0; + +err_irq: + free_irq(irq, pdev); +err: + kfree(psw); + return ret; +} + +static int switch_drv_remove(struct platform_device *pdev) +{ + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + int irq = platform_get_irq(pdev, 0); + + if (psw_info->name) + device_remove_file(&pdev->dev, &dev_attr_switch); + + platform_set_drvdata(pdev, NULL); + flush_scheduled_work(); + del_timer_sync(&psw->debounce); + free_irq(irq, pdev); + + kfree(psw); + + return 0; +} + +static struct platform_driver switch_driver = { + .probe = switch_drv_probe, + .remove = switch_drv_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init switch_init(void) +{ + printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION); + return platform_driver_register(&switch_driver); +} + +static void __exit switch_exit(void) +{ + platform_driver_unregister(&switch_driver); +} +module_init(switch_init); +module_exit(switch_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("Paul Mundt"); +MODULE_LICENSE("GPLv2"); diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h new file mode 100644 index 000000000000..dfc6bad567f0 --- /dev/null +++ b/include/asm-sh/push-switch.h @@ -0,0 +1,28 @@ +#ifndef __ASM_SH_PUSH_SWITCH_H +#define __ASM_SH_PUSH_SWITCH_H + +#include +#include +#include + +struct push_switch { + /* switch state */ + unsigned int state:1; + /* debounce timer */ + struct timer_list debounce; + /* workqueue */ + struct work_struct work; +}; + +struct push_switch_platform_info { + /* IRQ handler */ + irqreturn_t (*irq_handler)(int irq, void *data); + /* Special IRQ flags */ + unsigned int irq_flags; + /* Bit location of switch */ + unsigned int bit; + /* Symbolic switch name */ + const char *name; +}; + +#endif /* __ASM_SH_PUSH_SWITCH_H */ -- cgit v1.2.3 From 9daa0c257d6c200b58092e0bfc32b77c4618a8af Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 11:24:39 +0900 Subject: sh: R7780RP push-switch support. This adds simple push-switch support for the RDBRP-1/RDBREVRP-1 debug boards found on the R7780RP-1. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/Makefile | 4 +- arch/sh/boards/renesas/r7780rp/psw.c | 122 ++++++++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 1 deletion(-) create mode 100644 arch/sh/boards/renesas/r7780rp/psw.c (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index f1776d027978..574b0316ed56 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -3,4 +3,6 @@ # obj-y := setup.o io.o irq.o -obj-$(CONFIG_HEARTBEAT) += led.o + +obj-$(CONFIG_HEARTBEAT) += led.o +obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c new file mode 100644 index 000000000000..c844dfa5d58d --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/psw.c @@ -0,0 +1,122 @@ +/* + * arch/sh/boards/renesas/r7780rp/psw.c + * + * push switch support for RDBRP-1/RDBREVRP-1 debug boards. + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include + +static irqreturn_t psw_irq_handler(int irq, void *arg) +{ + struct platform_device *pdev = arg; + struct push_switch *psw = platform_get_drvdata(pdev); + struct push_switch_platform_info *psw_info = pdev->dev.platform_data; + unsigned int l, mask; + int ret = 0; + + l = ctrl_inw(PA_DBSW); + + /* Nothing to do if there's no state change */ + if (psw->state) { + ret = 1; + goto out; + } + + mask = l & 0x70; + /* Figure out who raised it */ + if (mask & (1 << psw_info->bit)) { + psw->state = !!(mask & (1 << psw_info->bit)); + if (psw->state) /* debounce */ + mod_timer(&psw->debounce, jiffies + 50); + + ret = 1; + } + +out: + /* Clear the switch IRQs */ + l |= (0x7 << 12); + ctrl_outw(l, PA_DBSW); + + return IRQ_RETVAL(ret); +} + +static struct resource psw_resources[] = { + [0] = { + .start = IRQ_PSW, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct push_switch_platform_info s2_platform_data = { + .name = "s2", + .bit = 6, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s2_switch_device = { + .name = "push-switch", + .id = 0, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s2_platform_data, + }, +}; + +static struct push_switch_platform_info s3_platform_data = { + .name = "s3", + .bit = 5, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s3_switch_device = { + .name = "push-switch", + .id = 1, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s3_platform_data, + }, +}; + +static struct push_switch_platform_info s4_platform_data = { + .name = "s4", + .bit = 4, + .irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_SHARED, + .irq_handler = psw_irq_handler, +}; + +static struct platform_device s4_switch_device = { + .name = "push-switch", + .id = 2, + .num_resources = ARRAY_SIZE(psw_resources), + .resource = psw_resources, + .dev = { + .platform_data = &s4_platform_data, + }, +}; + +static struct platform_device *psw_devices[] = { + &s2_switch_device, &s3_switch_device, &s4_switch_device, +}; + +static int __init psw_init(void) +{ + return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices)); +} +module_init(psw_init); -- cgit v1.2.3 From 9b3a53ab76771e3669e50086c131e1574fe25847 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 24 Nov 2006 11:42:24 +0900 Subject: sh: TLB miss fast-path optimizations. Handle simple TLB miss faults which can be resolved completely from the page table in assembler. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 + arch/sh/kernel/cpu/sh3/entry.S | 206 +++++++++++++++++++++++++++++++++++++---- arch/sh/kernel/cpu/sh4/probe.c | 19 ++-- arch/sh/mm/Kconfig | 1 + arch/sh/mm/fault.c | 86 ----------------- include/asm-sh/pgtable.h | 6 +- 6 files changed, 204 insertions(+), 117 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a03f155571c8..48308dc86e33 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -379,6 +379,9 @@ config CPU_HAS_SR_RB See for further information on SR.RB and register banking in the kernel in general. +config CPU_HAS_PTEA + bool + endmenu menu "Timer support" diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 869d56fb7d63..5de99b498738 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,8 +13,10 @@ #include #include #include -#include #include +#include +#include +#include ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -136,29 +138,14 @@ ENTRY(tlb_protection_violation_store) call_dpf: mov.l 1f, r0 - mov r5, r8 - mov.l @r0, r6 - mov r6, r9 - mov.l 2f, r0 - sts pr, r10 - jsr @r0 - mov r15, r4 - ! - tst r0, r0 - bf/s 0f - lds r10, pr - rts - nop -0: sti + mov.l @r0, r6 ! address mov.l 3f, r0 - mov r9, r6 - mov r8, r5 + sti jmp @r0 - mov r15, r4 + mov r15, r4 ! regs .align 2 1: .long MMU_TEA -2: .long __do_page_fault 3: .long do_page_fault .align 2 @@ -344,9 +331,176 @@ general_exception: 2: .long ret_from_exception ! ! + +/* This code makes some assumptions to improve performance. + * Make sure they are stil true. */ +#if PTRS_PER_PGD != PTRS_PER_PTE +#error PDG and PTE sizes don't match +#endif + +/* gas doesn't flag impossible values for mov #immediate as an error */ +#if (_PAGE_PRESENT >> 2) > 0x7f +#error cannot load PAGE_PRESENT as an immediate +#endif +#if _PAGE_DIRTY > 0x7f +#error cannot load PAGE_DIRTY as an immediate +#endif +#if (_PAGE_PRESENT << 2) != _PAGE_ACCESSED +#error cannot derive PAGE_ACCESSED from PAGE_PRESENT +#endif + +#if defined(CONFIG_CPU_SH4) +#define ldmmupteh(r) mov.l 8f, r +#else +#define ldmmupteh(r) mov #MMU_PTEH, r +#endif + .balign 1024,0,1024 tlb_miss: - mov.l 1f, k2 +#ifdef COUNT_EXCEPTIONS + ! Increment the counts + mov.l 9f, k1 + mov.l @k1, k2 + add #1, k2 + mov.l k2, @k1 +#endif + + ! k0 scratch + ! k1 pgd and pte pointers + ! k2 faulting address + ! k3 pgd and pte index masks + ! k4 shift + + ! Load up the pgd entry (k1) + + ldmmupteh(k0) ! 9 LS (latency=2) MMU_PTEH + + mov.w 4f, k3 ! 8 LS (latency=2) (PTRS_PER_PGD-1) << 2 + mov #-(PGDIR_SHIFT-2), k4 ! 6 EX + + mov.l @(MMU_TEA-MMU_PTEH,k0), k2 ! 18 LS (latency=2) + + mov.l @(MMU_TTB-MMU_PTEH,k0), k1 ! 18 LS (latency=2) + + mov k2, k0 ! 5 MT (latency=0) + shld k4, k0 ! 99 EX + + and k3, k0 ! 78 EX + + mov.l @(k0, k1), k1 ! 21 LS (latency=2) + mov #-(PAGE_SHIFT-2), k4 ! 6 EX + + ! Load up the pte entry (k2) + + mov k2, k0 ! 5 MT (latency=0) + shld k4, k0 ! 99 EX + + tst k1, k1 ! 86 MT + + bt 20f ! 110 BR + + and k3, k0 ! 78 EX + mov.w 5f, k4 ! 8 LS (latency=2) _PAGE_PRESENT + + mov.l @(k0, k1), k2 ! 21 LS (latency=2) + add k0, k1 ! 49 EX + +#ifdef CONFIG_CPU_HAS_PTEA + ! Test the entry for present and _PAGE_ACCESSED + + mov #-28, k3 ! 6 EX + mov k2, k0 ! 5 MT (latency=0) + + tst k4, k2 ! 68 MT + shld k3, k0 ! 99 EX + + bt 20f ! 110 BR + + ! Set PTEA register + ! MMU_PTEA = ((pteval >> 28) & 0xe) | (pteval & 0x1) + ! + ! k0=pte>>28, k1=pte*, k2=pte, k3=, k4=_PAGE_PRESENT + + and #0xe, k0 ! 79 EX + + mov k0, k3 ! 5 MT (latency=0) + mov k2, k0 ! 5 MT (latency=0) + + and #1, k0 ! 79 EX + + or k0, k3 ! 82 EX + + ldmmupteh(k0) ! 9 LS (latency=2) + shll2 k4 ! 101 EX _PAGE_ACCESSED + + tst k4, k2 ! 68 MT + + mov.l k3, @(MMU_PTEA-MMU_PTEH,k0) ! 27 LS + + mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK + + ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED +#else + + ! Test the entry for present and _PAGE_ACCESSED + + mov.l 7f, k3 ! 9 LS (latency=2) _PAGE_FLAGS_HARDWARE_MASK + tst k4, k2 ! 68 MT + + shll2 k4 ! 101 EX _PAGE_ACCESSED + ldmmupteh(k0) ! 9 LS (latency=2) + + bt 20f ! 110 BR + tst k4, k2 ! 68 MT + + ! k0=MMU_PTEH, k1=pte*, k2=pte, k3=_PAGE_FLAGS_HARDWARE, k4=_PAGE_ACCESSED + +#endif + + ! Set up the entry + + and k2, k3 ! 78 EX + bt/s 10f ! 108 BR + + mov.l k3, @(MMU_PTEL-MMU_PTEH,k0) ! 27 LS + + ldtlb ! 128 CO + + ! At least one instruction between ldtlb and rte + nop ! 119 NOP + + rte ! 126 CO + + nop ! 119 NOP + + +10: or k4, k2 ! 82 EX + + ldtlb ! 128 CO + + ! At least one instruction between ldtlb and rte + mov.l k2, @k1 ! 27 LS + + rte ! 126 CO + + ! Note we cannot execute mov here, because it is executed after + ! restoring SSR, so would be executed in user space. + nop ! 119 NOP + + + .align 5 + ! Once cache line if possible... +1: .long swapper_pg_dir +4: .short (PTRS_PER_PGD-1) << 2 +5: .short _PAGE_PRESENT +7: .long _PAGE_FLAGS_HARDWARE_MASK +8: .long MMU_PTEH +#ifdef COUNT_EXCEPTIONS +9: .long exception_count_miss +#endif + + ! Either pgd or pte not present +20: mov.l 1f, k2 mov.l 4f, k3 bra handle_exception mov.l @k2, k2 @@ -496,6 +650,15 @@ skip_save: bf interrupt_exception shlr2 r8 shlr r8 + +#ifdef COUNT_EXCEPTIONS + mov.l 5f, r9 + add r8, r9 + mov.l @r9, r10 + add #1, r10 + mov.l r10, @r9 +#endif + mov.l 4f, r9 add r8, r9 mov.l @r9, r9 @@ -509,6 +672,9 @@ skip_save: 2: .long 0x000080f0 ! FD=1, IMASK=15 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table +#ifdef COUNT_EXCEPTIONS +5: .long exception_count_table +#endif interrupt_exception: mov.l 1f, r9 diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index c294de1e14a3..afe0f1b1c030 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -79,16 +79,16 @@ int __init detect_cpu_and_cache_system(void) case 0x205: cpu_data->type = CPU_SH7750; cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | - CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; + CPU_HAS_PERF_COUNTER; break; case 0x206: cpu_data->type = CPU_SH7750S; cpu_data->flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | - CPU_HAS_PERF_COUNTER | CPU_HAS_PTEA; + CPU_HAS_PERF_COUNTER; break; case 0x1100: cpu_data->type = CPU_SH7751; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x2000: cpu_data->type = CPU_SH73180; @@ -126,23 +126,22 @@ int __init detect_cpu_and_cache_system(void) break; case 0x8000: cpu_data->type = CPU_ST40RA; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x8100: cpu_data->type = CPU_ST40GX1; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x700: cpu_data->type = CPU_SH4_501; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_PTEA; break; case 0x600: cpu_data->type = CPU_SH4_202; cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { @@ -160,7 +159,7 @@ int __init detect_cpu_and_cache_system(void) cpu_data->icache.ways = 2; cpu_data->dcache.ways = 2; - cpu_data->flags |= CPU_HAS_FPU | CPU_HAS_PTEA; + cpu_data->flags |= CPU_HAS_FPU; break; default: @@ -173,6 +172,10 @@ int __init detect_cpu_and_cache_system(void) cpu_data->dcache.ways = 1; #endif +#ifdef CONFIG_CPU_HAS_PTEA + cpu_data->flags |= CPU_HAS_PTEA; +#endif + /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 88e9663fc9fc..6cd6d0045d16 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -20,6 +20,7 @@ config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB + select CPU_HAS_PTEA if !CPU_SUBTYPE_ST40 config CPU_SH4A bool diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 128907ef7fcd..123fb80c859d 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -223,89 +223,3 @@ do_sigbus: if (!user_mode(regs)) goto no_context; } - -#ifdef CONFIG_SH_STORE_QUEUES -/* - * This is a special case for the SH-4 store queues, as pages for this - * space still need to be faulted in before it's possible to flush the - * store queue cache for writeout to the remapped region. - */ -#define P3_ADDR_MAX (P4SEG_STORE_QUE + 0x04000000) -#else -#define P3_ADDR_MAX P4SEG -#endif - -/* - * Called with interrupts disabled. - */ -asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, - unsigned long writeaccess, - unsigned long address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t entry; - struct mm_struct *mm = current->mm; - spinlock_t *ptl; - int ret = 1; - -#ifdef CONFIG_SH_KGDB - if (kgdb_nofault && kgdb_bus_err_hook) - kgdb_bus_err_hook(); -#endif - - /* - * We don't take page faults for P1, P2, and parts of P4, these - * are always mapped, whether it be due to legacy behaviour in - * 29-bit mode, or due to PMB configuration in 32-bit mode. - */ - if (address >= P3SEG && address < P3_ADDR_MAX) { - pgd = pgd_offset_k(address); - mm = NULL; - } else { - if (unlikely(address >= TASK_SIZE || !mm)) - return 1; - - pgd = pgd_offset(mm, address); - } - - pud = pud_offset(pgd, address); - if (pud_none_or_clear_bad(pud)) - return 1; - pmd = pmd_offset(pud, address); - if (pmd_none_or_clear_bad(pmd)) - return 1; - - if (mm) - pte = pte_offset_map_lock(mm, pmd, address, &ptl); - else - pte = pte_offset_kernel(pmd, address); - - entry = *pte; - if (unlikely(pte_none(entry) || pte_not_present(entry))) - goto unlock; - if (unlikely(writeaccess && !pte_write(entry))) - goto unlock; - - if (writeaccess) - entry = pte_mkdirty(entry); - entry = pte_mkyoung(entry); - -#ifdef CONFIG_CPU_SH4 - /* - * ITLB is not affected by "ldtlb" instruction. - * So, we need to flush the entry by ourselves. - */ - __flush_tlb_page(get_asid(), address & PAGE_MASK); -#endif - - set_pte(pte, entry); - update_mmu_cache(NULL, address, entry); - ret = 0; -unlock: - if (mm) - pte_unmap_unlock(pte, ptl); - return ret; -} diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index b1f21e765640..fa625245051d 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -43,12 +43,12 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; /* PGD bits */ #define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) #define PGDIR_BITS (32 - PGDIR_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_SIZE (1 << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* Entries per level */ -#define PTRS_PER_PTE (1UL << PTE_BITS) -#define PTRS_PER_PGD (1UL << PGDIR_BITS) +#define PTRS_PER_PTE (1 << PTE_BITS) +#define PTRS_PER_PGD (1 << PGDIR_BITS) #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 -- cgit v1.2.3 From e0969e0c9b609fdfe217e34f3e046179ffe88eb6 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Fri, 24 Nov 2006 13:01:36 +0900 Subject: sh: Fix syscall tracing ordering. The implementation of system call tracing in the kernel has a couple of ordering problems: - the validity of the system call number is checked before calling out to system call tracing code, and should be done after - the system call number used when tracing is the one the system call was invoked with, while the system call tracing code can legitimatly change the call number (for example strace permutes fork into clone) This patch fixes both of these problems, and also reoders the code slightly to make the direct path through the code the common case. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/entry-common.S | 45 +++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 5bc7fa91d095..8f96d21fcb1c 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -256,8 +256,7 @@ syscall_trace_entry: mov.l @(OFF_R6,r15), r6 mov.l @(OFF_R7,r15), r7 ! arg3 mov.l @(OFF_R3,r15), r3 ! syscall_nr - ! Arrange for do_syscall_trace to be called - ! again as the system call returns. + ! mov.l 2f, r10 ! Number of syscalls cmp/hs r10, r3 bf syscall_call @@ -273,6 +272,18 @@ __restore_all: .align 2 1: .long restore_all + .align 2 +not_syscall_tra: + bra debug_trap + nop + + .align 2 +syscall_badsys: ! Bad syscall number + mov #-ENOSYS, r0 + bra resume_userspace + mov.l r0, @(OFF_R0,r15) ! Return value + + /* * Syscall interface: * @@ -316,39 +327,27 @@ ENTRY(system_call) ! Is the trap argument >= 0x20? (TRA will be >= 0x80) mov #0x7f, r9 cmp/hi r9, r8 - bt/s 0f + bt/s not_syscall_tra mov #OFF_TRA, r9 add r15, r9 - ! mov.l r8, @r9 ! set TRA value to tra sti - ! Call the system call handler through the table. - ! First check for bad syscall number - mov r3, r9 - mov.l 2f, r8 ! Number of syscalls - cmp/hs r8, r9 - get_current_thread_info r8, r10 - bf good_system_call -syscall_badsys: ! Bad syscall number - mov #-ENOSYS, r0 - bra resume_userspace - mov.l r0, @(OFF_R0,r15) ! Return value ! -0: - bra debug_trap - nop - ! -good_system_call: ! Good syscall number + get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 mov #_TIF_SYSCALL_TRACE, r10 tst r10, r8 bf syscall_trace_entry ! + mov.l 2f, r8 ! Number of syscalls + cmp/hs r8, r3 + bt syscall_badsys + ! syscall_call: - shll2 r9 ! x4 + shll2 r3 ! x4 mov.l 3f, r8 ! Load the address of sys_call_table - add r8, r9 - mov.l @r9, r8 + add r8, r3 + mov.l @r3, r8 jsr @r8 ! jump to specific syscall handler nop mov.l @(OFF_R0,r15), r12 ! save r0 -- cgit v1.2.3 From 4dfc119f1c0723c54a20ff5ca4ea460ce7a4edb5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 14:43:09 +0900 Subject: sh: dma-sysfs fixes. Handle the case where no registered DMACs exist somewhat more gracefully. While we're at it, check for sysdev_create_file() failing. Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sysfs.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 29b8ef9873d1..eebcd4768bbf 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -3,7 +3,7 @@ * * sysfs interface for SH DMA API * - * Copyright (C) 2004, 2005 Paul Mundt + * Copyright (C) 2004 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -21,7 +21,6 @@ static struct sysdev_class dma_sysclass = { set_kset_name("dma"), }; - EXPORT_SYMBOL(dma_sysclass); static ssize_t dma_show_devices(struct sys_device *dev, char *buf) @@ -31,7 +30,10 @@ static ssize_t dma_show_devices(struct sys_device *dev, char *buf) for (i = 0; i < MAX_DMA_CHANNELS; i++) { struct dma_info *info = get_dma_info(i); - struct dma_channel *channel = &info->channels[i]; + struct dma_channel *channel = get_dma_channel(i); + + if (unlikely(!info) || !channel) + continue; len += sprintf(buf + len, "%2d: %14s %s\n", channel->chan, info->name, @@ -125,11 +127,16 @@ int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info) if (ret) return ret; - sysdev_create_file(dev, &attr_dev_id); - sysdev_create_file(dev, &attr_count); - sysdev_create_file(dev, &attr_mode); - sysdev_create_file(dev, &attr_flags); - sysdev_create_file(dev, &attr_config); + ret |= sysdev_create_file(dev, &attr_dev_id); + ret |= sysdev_create_file(dev, &attr_count); + ret |= sysdev_create_file(dev, &attr_mode); + ret |= sysdev_create_file(dev, &attr_flags); + ret |= sysdev_create_file(dev, &attr_config); + + if (unlikely(ret)) { + dev_err(&info->pdev->dev, "Failed creating attrs\n"); + return ret; + } snprintf(name, sizeof(name), "dma%d", chan->chan); return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name); -- cgit v1.2.3 From 49f860bb5db877a2c75642e7e19af40e3010afec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 14:48:14 +0900 Subject: sh: Make dma-isa depend on ISA_DMA_API. Previously we linked in the ISA DMA wrapper unconditionally. As there are very few users of this, it's better to make it conditional. Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile index 065d4c90970e..db1295d32268 100644 --- a/arch/sh/drivers/dma/Makefile +++ b/arch/sh/drivers/dma/Makefile @@ -2,8 +2,8 @@ # Makefile for the SuperH DMA specific kernel interface routines under Linux. # -obj-y += dma-api.o dma-isa.o +obj-y += dma-api.o +obj-$(CONFIG_ISA_DMA_API) += dma-isa.o obj-$(CONFIG_SYSFS) += dma-sysfs.o obj-$(CONFIG_SH_DMA) += dma-sh.o obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o - -- cgit v1.2.3 From e803aaf63a18b26668fbfbfd41c65527bcc10532 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 14:50:05 +0900 Subject: sh: Drop name overload in dma-sh. Pass along the dev_id from request_dma() all the way down, rather than inserting an artificial name relating to the TEI line that we were doing before. This makes the line a bit less obvious, but dev_id is the proper behaviour for this regardless. Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 660786013350..f63721ed86c2 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -94,20 +94,13 @@ static int sh_dmac_request_dma(struct dma_channel *chan) if (unlikely(!chan->flags & DMA_TEI_CAPABLE)) return 0; - chan->name = kzalloc(32, GFP_KERNEL); - if (unlikely(chan->name == NULL)) - return -ENOMEM; - snprintf(chan->name, 32, "DMAC Transfer End (Channel %d)", - chan->chan); - return request_irq(get_dmte_irq(chan->chan), dma_tei, - IRQF_DISABLED, chan->name, chan); + IRQF_DISABLED, chan->dev_id, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) { free_irq(get_dmte_irq(chan->chan), chan); - kfree(chan->name); } static void -- cgit v1.2.3 From db9b99d461ddbbaa43c1e3581b1677b82c960948 Mon Sep 17 00:00:00 2001 From: Mark Glaisher Date: Fri, 24 Nov 2006 15:13:52 +0900 Subject: sh: dma-api channel capability extensions. This extends the SH DMA API for allowing handling of DMA channels based off of their respective capabilities. A couple of functions are added to the existing API, the core bits are register_chan_caps() for registering channel capabilities, and request_dma_bycap() for fetching a channel dynamically based off of a capability set. Signed-off-by: Mark Glaisher Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-api.c | 274 +++++++++++++++++++++++++++++------------- include/asm-sh/dma.h | 40 ++++-- 2 files changed, 218 insertions(+), 96 deletions(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index 47c3e837599b..e062067edd24 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -11,61 +11,27 @@ */ #include #include -#include #include #include #include #include +#include #include DEFINE_SPINLOCK(dma_spin_lock); static LIST_HEAD(registered_dmac_list); -/* - * A brief note about the reasons for this API as it stands. - * - * For starters, the old ISA DMA API didn't work for us for a number of - * reasons, for one, the vast majority of channels on the SH DMAC are - * dual-address mode only, and both the new and the old DMA APIs are after the - * concept of managing a DMA buffer, which doesn't overly fit this model very - * well. In addition to which, the new API is largely geared at IOMMUs and - * GARTs, and doesn't even support the channel notion very well. - * - * The other thing that's a marginal issue, is the sheer number of random DMA - * engines that are present (ie, in boards like the Dreamcast), some of which - * cascade off of the SH DMAC, and others do not. As such, there was a real - * need for a scalable subsystem that could deal with both single and - * dual-address mode usage, in addition to interoperating with cascaded DMACs. - * - * There really isn't any reason why this needs to be SH specific, though I'm - * not aware of too many other processors (with the exception of some MIPS) - * that have the same concept of a dual address mode, or any real desire to - * actually make use of the DMAC even if such a subsystem were exposed - * elsewhere. - * - * The idea for this was derived from the ARM port, which acted as an excellent - * reference when trying to address these issues. - * - * It should also be noted that the decision to add Yet Another DMA API(tm) to - * the kernel wasn't made easily, and was only decided upon after conferring - * with jejb with regards to the state of the old and new APIs as they applied - * to these circumstances. Philip Blundell was also a great help in figuring - * out some single-address mode DMA semantics that were otherwise rather - * confusing. - */ - struct dma_info *get_dma_info(unsigned int chan) { struct dma_info *info; - unsigned int total = 0; /* * Look for each DMAC's range to determine who the owner of * the channel is. */ list_for_each_entry(info, ®istered_dmac_list, list) { - total += info->nr_channels; - if (chan > total) + if ((chan < info->first_channel_nr) || + (chan >= info->first_channel_nr + info->nr_channels)) continue; return info; @@ -73,6 +39,22 @@ struct dma_info *get_dma_info(unsigned int chan) return NULL; } +EXPORT_SYMBOL(get_dma_info); + +struct dma_info *get_dma_info_by_name(const char *dmac_name) +{ + struct dma_info *info; + + list_for_each_entry(info, ®istered_dmac_list, list) { + if (dmac_name && (strcmp(dmac_name, info->name) != 0)) + continue; + else + return info; + } + + return NULL; +} +EXPORT_SYMBOL(get_dma_info_by_name); static unsigned int get_nr_channels(void) { @@ -91,63 +73,161 @@ static unsigned int get_nr_channels(void) struct dma_channel *get_dma_channel(unsigned int chan) { struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel; + int i; - if (!info) + if (unlikely(!info)) return ERR_PTR(-EINVAL); - return info->channels + chan; + for (i = 0; i < info->nr_channels; i++) { + channel = &info->channels[i]; + if (channel->chan == chan) + return channel; + } + + return NULL; } +EXPORT_SYMBOL(get_dma_channel); int get_dma_residue(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->get_residue) return info->ops->get_residue(channel); return 0; } +EXPORT_SYMBOL(get_dma_residue); -int request_dma(unsigned int chan, const char *dev_id) +static int search_cap(const char **haystack, const char *needle) { - struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + const char **p; + + for (p = haystack; *p; p++) + if (strcmp(*p, needle) == 0) + return 1; + + return 0; +} + +/** + * request_dma_bycap - Allocate a DMA channel based on its capabilities + * @dmac: List of DMA controllers to search + * @caps: List of capabilites + * + * Search all channels of all DMA controllers to find a channel which + * matches the requested capabilities. The result is the channel + * number if a match is found, or %-ENODEV if no match is found. + * + * Note that not all DMA controllers export capabilities, in which + * case they can never be allocated using this API, and so + * request_dma() must be used specifying the channel number. + */ +int request_dma_bycap(const char **dmac, const char **caps, const char *dev_id) +{ + unsigned int found = 0; + struct dma_info *info; + const char **p; + int i; + + BUG_ON(!dmac || !caps); + + list_for_each_entry(info, ®istered_dmac_list, list) + if (strcmp(*dmac, info->name) == 0) { + found = 1; + break; + } + + if (!found) + return -ENODEV; + + for (i = 0; i < info->nr_channels; i++) { + struct dma_channel *channel = &info->channels[i]; + + if (unlikely(!channel->caps)) + continue; + + for (p = caps; *p; p++) { + if (!search_cap(channel->caps, *p)) + break; + if (request_dma(channel->chan, dev_id) == 0) + return channel->chan; + } + } + + return -EINVAL; +} +EXPORT_SYMBOL(request_dma_bycap); + +int dmac_search_free_channel(const char *dev_id) +{ + struct dma_channel *channel = { 0 }; + struct dma_info *info = get_dma_info(0); + int i; + + for (i = 0; i < info->nr_channels; i++) { + channel = &info->channels[i]; + if (unlikely(!channel)) + return -ENODEV; + + if (atomic_read(&channel->busy) == 0) + break; + } - down(&channel->sem); + if (info->ops->request) { + int result = info->ops->request(channel); + if (result) + return result; - if (!info->ops || chan >= MAX_DMA_CHANNELS) { - up(&channel->sem); - return -EINVAL; + atomic_set(&channel->busy, 1); + return channel->chan; } - atomic_set(&channel->busy, 1); + return -ENOSYS; +} + +int request_dma(unsigned int chan, const char *dev_id) +{ + struct dma_channel *channel = { 0 }; + struct dma_info *info = get_dma_info(chan); + int result; + + channel = get_dma_channel(chan); + if (atomic_xchg(&channel->busy, 1)) + return -EBUSY; strlcpy(channel->dev_id, dev_id, sizeof(channel->dev_id)); - up(&channel->sem); + if (info->ops->request) { + result = info->ops->request(channel); + if (result) + atomic_set(&channel->busy, 0); - if (info->ops->request) - return info->ops->request(channel); + return result; + } return 0; } +EXPORT_SYMBOL(request_dma); void free_dma(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->free) info->ops->free(channel); atomic_set(&channel->busy, 0); } +EXPORT_SYMBOL(free_dma); void dma_wait_for_completion(unsigned int chan) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (channel->flags & DMA_TEI_CAPABLE) { wait_event(channel->wait_queue, @@ -158,21 +238,52 @@ void dma_wait_for_completion(unsigned int chan) while (info->ops->get_residue(channel)) cpu_relax(); } +EXPORT_SYMBOL(dma_wait_for_completion); + +int register_chan_caps(const char *dmac, struct dma_chan_caps *caps) +{ + struct dma_info *info; + unsigned int found = 0; + int i; + + list_for_each_entry(info, ®istered_dmac_list, list) + if (strcmp(dmac, info->name) == 0) { + found = 1; + break; + } + + if (unlikely(!found)) + return -ENODEV; + + for (i = 0; i < info->nr_channels; i++, caps++) { + struct dma_channel *channel; + + if ((info->first_channel_nr + i) != caps->ch_num) + return -EINVAL; + + channel = &info->channels[i]; + channel->caps = caps->caplist; + } + + return 0; +} +EXPORT_SYMBOL(register_chan_caps); void dma_configure_channel(unsigned int chan, unsigned long flags) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); if (info->ops->configure) info->ops->configure(channel, flags); } +EXPORT_SYMBOL(dma_configure_channel); int dma_xfer(unsigned int chan, unsigned long from, unsigned long to, size_t size, unsigned int mode) { struct dma_info *info = get_dma_info(chan); - struct dma_channel *channel = &info->channels[chan]; + struct dma_channel *channel = get_dma_channel(chan); channel->sar = from; channel->dar = to; @@ -181,8 +292,20 @@ int dma_xfer(unsigned int chan, unsigned long from, return info->ops->xfer(channel); } +EXPORT_SYMBOL(dma_xfer); + +int dma_extend(unsigned int chan, unsigned long op, void *param) +{ + struct dma_info *info = get_dma_info(chan); + struct dma_channel *channel = get_dma_channel(chan); + + if (info->ops->extend) + return info->ops->extend(channel, op, param); + + return -ENOSYS; +} +EXPORT_SYMBOL(dma_extend); -#ifdef CONFIG_PROC_FS static int dma_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) { @@ -214,8 +337,6 @@ static int dma_read_proc(char *buf, char **start, off_t off, return p - buf; } -#endif - int register_dmac(struct dma_info *info) { @@ -224,8 +345,7 @@ int register_dmac(struct dma_info *info) INIT_LIST_HEAD(&info->list); printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n", - info->name, info->nr_channels, - info->nr_channels > 1 ? "s" : ""); + info->name, info->nr_channels, info->nr_channels > 1 ? "s" : ""); BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels); @@ -242,28 +362,26 @@ int register_dmac(struct dma_info *info) size = sizeof(struct dma_channel) * info->nr_channels; - info->channels = kmalloc(size, GFP_KERNEL); + info->channels = kzalloc(size, GFP_KERNEL); if (!info->channels) return -ENOMEM; - - memset(info->channels, 0, size); } total_channels = get_nr_channels(); for (i = 0; i < info->nr_channels; i++) { - struct dma_channel *chan = info->channels + i; + struct dma_channel *chan = &info->channels[i]; + + atomic_set(&chan->busy, 0); - chan->chan = i; - chan->vchan = i + total_channels; + chan->chan = info->first_channel_nr + i; + chan->vchan = info->first_channel_nr + i + total_channels; memcpy(chan->dev_id, "Unused", 7); if (info->flags & DMAC_CHANNELS_TEI_CAPABLE) chan->flags |= DMA_TEI_CAPABLE; - init_MUTEX(&chan->sem); init_waitqueue_head(&chan->wait_queue); - dma_create_sysfs_files(chan, info); } @@ -271,6 +389,7 @@ int register_dmac(struct dma_info *info) return 0; } +EXPORT_SYMBOL(register_dmac); void unregister_dmac(struct dma_info *info) { @@ -285,31 +404,16 @@ void unregister_dmac(struct dma_info *info) list_del(&info->list); platform_device_unregister(info->pdev); } +EXPORT_SYMBOL(unregister_dmac); static int __init dma_api_init(void) { - printk("DMA: Registering DMA API.\n"); - -#ifdef CONFIG_PROC_FS + printk(KERN_NOTICE "DMA: Registering DMA API.\n"); create_proc_read_entry("dma", 0, 0, dma_read_proc, 0); -#endif - return 0; } - subsys_initcall(dma_api_init); MODULE_AUTHOR("Paul Mundt "); MODULE_DESCRIPTION("DMA API for SuperH"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(request_dma); -EXPORT_SYMBOL(free_dma); -EXPORT_SYMBOL(register_dmac); -EXPORT_SYMBOL(get_dma_residue); -EXPORT_SYMBOL(get_dma_info); -EXPORT_SYMBOL(get_dma_channel); -EXPORT_SYMBOL(dma_xfer); -EXPORT_SYMBOL(dma_wait_for_completion); -EXPORT_SYMBOL(dma_configure_channel); - diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h index d9daa028689f..faf3051cd429 100644 --- a/include/asm-sh/dma.h +++ b/include/asm-sh/dma.h @@ -14,9 +14,7 @@ #include #include #include -#include #include -#include /* The maximum address that we can perform a DMA transfer to on this platform */ /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any @@ -46,16 +44,21 @@ * DMAC (dma_info) flags */ enum { - DMAC_CHANNELS_CONFIGURED = 0x00, - DMAC_CHANNELS_TEI_CAPABLE = 0x01, + DMAC_CHANNELS_CONFIGURED = 0x01, + DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ }; /* * DMA channel capabilities / flags */ enum { - DMA_TEI_CAPABLE = 0x01, - DMA_CONFIGURED = 0x02, + DMA_CONFIGURED = 0x01, + + /* + * Transfer end interrupt, inherited from DMAC. + * wait_queue used in dma_wait_for_completion. + */ + DMA_TEI_CAPABLE = 0x02, }; extern spinlock_t dma_spin_lock; @@ -68,28 +71,31 @@ struct dma_ops { int (*get_residue)(struct dma_channel *chan); int (*xfer)(struct dma_channel *chan); - void (*configure)(struct dma_channel *chan, unsigned long flags); + int (*configure)(struct dma_channel *chan, unsigned long flags); + int (*extend)(struct dma_channel *chan, unsigned long op, void *param); }; struct dma_channel { - char dev_id[16]; + char dev_id[16]; /* unique name per DMAC of channel */ - unsigned int chan; /* Physical channel number */ + unsigned int chan; /* DMAC channel number */ unsigned int vchan; /* Virtual channel number */ + unsigned int mode; unsigned int count; unsigned long sar; unsigned long dar; + const char **caps; + unsigned long flags; atomic_t busy; - struct semaphore sem; wait_queue_head_t wait_queue; struct sys_device dev; - char *name; + void *priv_data; }; struct dma_info { @@ -103,6 +109,12 @@ struct dma_info { struct dma_channel *channels; struct list_head list; + int first_channel_nr; +}; + +struct dma_chan_caps { + int ch_num; + const char **caplist; }; #define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) @@ -121,6 +133,8 @@ extern int dma_xfer(unsigned int chan, unsigned long from, #define dma_read_page(chan, from, to) \ dma_read(chan, from, to, PAGE_SIZE) +extern int request_dma_bycap(const char **dmac, const char **caps, + const char *dev_id); extern int request_dma(unsigned int chan, const char *dev_id); extern void free_dma(unsigned int chan); extern int get_dma_residue(unsigned int chan); @@ -131,6 +145,10 @@ extern void dma_configure_channel(unsigned int chan, unsigned long flags); extern int register_dmac(struct dma_info *info); extern void unregister_dmac(struct dma_info *info); +extern struct dma_info *get_dma_info_by_name(const char *dmac_name); + +extern int dma_extend(unsigned int chan, unsigned long op, void *param); +extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); #ifdef CONFIG_SYSFS /* arch/sh/drivers/dma/dma-sysfs.c */ -- cgit v1.2.3 From 1dc41e58a553e612e3d0349bb60eef08f9462bde Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Nov 2006 19:46:18 +0900 Subject: sh: Fixup 4K irq stacks. There was a clobber issue with the register we were saving the stack in, so we switch to a register that we handle in the clobber list properly already. This also follows the x86 changes for allowing the softirq checks from hardirq context. Signed-off-by: Paul Mundt --- arch/sh/kernel/irq.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index edf4d2d21336..46a19e07abd3 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -78,8 +78,8 @@ union irq_ctx { u32 stack[THREAD_SIZE/sizeof(u32)]; }; -static union irq_ctx *hardirq_ctx[NR_CPUS]; -static union irq_ctx *softirq_ctx[NR_CPUS]; +static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; +static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, @@ -136,17 +136,24 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, irqctx->tinfo.task = curctx->tinfo.task; irqctx->tinfo.previous_sp = current_stack_pointer; + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + __asm__ __volatile__ ( "mov %0, r4 \n" - "mov r15, r9 \n" + "mov r15, r8 \n" "jsr @%1 \n" /* swith to the irq stack */ " mov %2, r15 \n" /* restore the stack (ring zero) */ - "mov r9, r15 \n" + "mov r8, r15 \n" : /* no outputs */ : "r" (irq), "r" (generic_handle_irq), "r" (isp) - /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "t", "pr" ); @@ -194,7 +201,7 @@ void irq_ctx_init(int cpu) irqctx->tinfo.task = NULL; irqctx->tinfo.exec_domain = NULL; irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET; + irqctx->tinfo.preempt_count = 0; irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); softirq_ctx[cpu] = irqctx; @@ -240,10 +247,14 @@ asmlinkage void do_softirq(void) "mov r9, r15 \n" : /* no outputs */ : "r" (__do_softirq), "r" (isp) - /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r15", "t", "pr" ); + + /* + * Shouldnt happen, we returned above if in_interrupt(): + */ + WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags); -- cgit v1.2.3 From 510c72ad2dd4e05e6908755f51ac89482c6eb987 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Nov 2006 12:06:26 +0900 Subject: sh: Fixup various PAGE_SIZE == 4096 assumptions. There were a number of places that made evil PAGE_SIZE == 4k assumptions that ended up breaking when trying to play with 8k and 64k page sizes, this fixes those up. The most significant change is the way we load THREAD_SIZE, previously this was done via: mov #(THREAD_SIZE >> 8), reg shll8 reg to avoid a memory access and allow the immediate load. With a 64k PAGE_SIZE, we're out of range for the immediate load size without resorting to special instructions available in later ISAs (movi20s and so on). The "workaround" for this is to bump up the shift to 10 and insert a shll2, which gives a bit more flexibility while still being much cheaper than a memory access. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/entry.S | 5 +++-- arch/sh/kernel/head.S | 5 +++-- arch/sh/kernel/relocate_kernel.S | 14 ++++++-------- arch/sh/mm/cache-sh4.c | 4 ++-- arch/sh/mm/clear_page.S | 18 +++++++++--------- arch/sh/mm/copy_page.S | 16 ++++++++-------- arch/sh/mm/init.c | 1 - arch/sh/mm/pg-dma.c | 2 -- include/asm-sh/entry-macros.S | 3 ++- include/asm-sh/pgtable.h | 6 +++--- include/asm-sh/thread_info.h | 8 +------- 11 files changed, 37 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 5de99b498738..7ba3dcbe7504 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -335,7 +335,7 @@ general_exception: /* This code makes some assumptions to improve performance. * Make sure they are stil true. */ #if PTRS_PER_PGD != PTRS_PER_PTE -#error PDG and PTE sizes don't match +#error PGD and PTE sizes don't match #endif /* gas doesn't flag impossible values for mov #immediate as an error */ @@ -547,8 +547,9 @@ ENTRY(handle_exception) bt/s 1f ! It's a kernel to kernel transition. mov r15, k0 ! save original stack to k0 /* User space to kernel */ - mov #(THREAD_SIZE >> 8), k1 + mov #(THREAD_SIZE >> 10), k1 shll8 k1 ! k1 := THREAD_SIZE + shll2 k1 add current, k1 mov k1, r15 ! change to kernel stack ! diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index b5ff23264617..6aca4bc6ec5d 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -33,7 +33,7 @@ ENTRY(empty_zero_page) .long 0x00360000 /* INITRD_START */ .long 0x000a0000 /* INITRD_SIZE */ .long 0 - .balign 4096,0,4096 + .balign PAGE_SIZE,0,PAGE_SIZE .text /* @@ -70,8 +70,9 @@ ENTRY(_stext) ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) - mov #(THREAD_SIZE >> 8), r1 + mov #(THREAD_SIZE >> 10), r1 shll8 r1 ! r1 = THREAD_SIZE + shll2 r1 sub r1, r0 ! #ifdef CONFIG_CPU_HAS_SR_RB ldc r0, r7_bank ! ... and initial thread_info diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S index 8221b37c9773..c66cb3209db5 100644 --- a/arch/sh/kernel/relocate_kernel.S +++ b/arch/sh/kernel/relocate_kernel.S @@ -7,11 +7,9 @@ * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. */ - #include - -#define PAGE_SIZE 4096 /* must be same value as in */ - +#include +#include .globl relocate_new_kernel relocate_new_kernel: @@ -20,8 +18,8 @@ relocate_new_kernel: /* r6 = start_address */ /* r7 = vbr_reg */ - mov.l 10f,r8 /* 4096 */ - mov.l 11f,r9 /* 0xa0000000 */ + mov.l 10f,r8 /* PAGE_SIZE */ + mov.l 11f,r9 /* P2SEG */ /* stack setting */ add r8,r5 @@ -32,7 +30,7 @@ relocate_new_kernel: 0: mov.l @r4+,r0 /* cmd = *ind++ */ -1: /* addr = (cmd | 0xa0000000) & 0xfffffff0 */ +1: /* addr = (cmd | P2SEG) & 0xfffffff0 */ mov r0,r2 or r9,r2 mov #-16,r1 @@ -92,7 +90,7 @@ relocate_new_kernel: 10: .long PAGE_SIZE 11: - .long 0xa0000000 + .long P2SEG relocate_new_kernel_end: diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 7e62ba071d64..ae531affccbd 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -225,7 +225,7 @@ static inline void flush_cache_4096(unsigned long start, */ if ((cpu_data->flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) - exec_offset = 0x20000000; + exec_offset = 0x20000000; local_irq_save(flags); __flush_cache_4096(start | SH_CACHE_ASSOC, @@ -246,7 +246,7 @@ void flush_dcache_page(struct page *page) /* Loop all the D-cache */ n = cpu_data->dcache.n_aliases; - for (i = 0; i < n; i++, addr += PAGE_SIZE) + for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } diff --git a/arch/sh/mm/clear_page.S b/arch/sh/mm/clear_page.S index 7b96425ae270..8a706131e521 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/mm/clear_page.S @@ -1,12 +1,12 @@ -/* $Id: clear_page.S,v 1.13 2003/08/25 17:03:10 lethal Exp $ - * +/* * __clear_user_page, __clear_user, clear_page implementation of SuperH * * Copyright (C) 2001 Kaz Kojima * Copyright (C) 2001, 2002 Niibe Yutaka - * + * Copyright (C) 2006 Paul Mundt */ #include +#include /* * clear_page_slow @@ -18,11 +18,11 @@ /* * r0 --- scratch * r4 --- to - * r5 --- to + 4096 + * r5 --- to + PAGE_SIZE */ ENTRY(clear_page_slow) mov r4,r5 - mov.w .Llimit,r0 + mov.l .Llimit,r0 add r0,r5 mov #0,r0 ! @@ -50,7 +50,7 @@ ENTRY(clear_page_slow) ! rts nop -.Llimit: .word (4096-28) +.Llimit: .long (PAGE_SIZE-28) ENTRY(__clear_user) ! @@ -164,10 +164,10 @@ ENTRY(__clear_user) * r0 --- scratch * r4 --- to * r5 --- orig_to - * r6 --- to + 4096 + * r6 --- to + PAGE_SIZE */ ENTRY(__clear_user_page) - mov.w .L4096,r0 + mov.l .Lpsz,r0 mov r4,r6 add r0,r6 mov #0,r0 @@ -191,7 +191,7 @@ ENTRY(__clear_user_page) ! rts nop -.L4096: .word 4096 +.Lpsz: .long PAGE_SIZE #endif diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 1addffe117c3..397c94c97315 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -1,12 +1,12 @@ -/* $Id: copy_page.S,v 1.8 2003/08/25 17:03:10 lethal Exp $ - * +/* * copy_page, __copy_user_page, __copy_user implementation of SuperH * * Copyright (C) 2001 Niibe Yutaka & Kaz Kojima * Copyright (C) 2002 Toshinobu Sugioka - * + * Copyright (C) 2006 Paul Mundt */ #include +#include /* * copy_page_slow @@ -18,7 +18,7 @@ /* * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + 4096 + * r8 --- from + PAGE_SIZE * r9 --- not used * r10 --- to * r11 --- from @@ -30,7 +30,7 @@ ENTRY(copy_page_slow) mov r4,r10 mov r5,r11 mov r5,r8 - mov.w .L4096,r0 + mov.l .Lpsz,r0 add r0,r8 ! 1: mov.l @r11+,r0 @@ -80,7 +80,7 @@ ENTRY(copy_page_slow) /* * r0, r1, r2, r3, r4, r5, r6, r7 --- scratch - * r8 --- from + 4096 + * r8 --- from + PAGE_SIZE * r9 --- orig_to * r10 --- to * r11 --- from @@ -94,7 +94,7 @@ ENTRY(__copy_user_page) mov r5,r11 mov r6,r9 mov r5,r8 - mov.w .L4096,r0 + mov.l .Lpsz,r0 add r0,r8 ! 1: ocbi @r9 @@ -129,7 +129,7 @@ ENTRY(__copy_user_page) rts nop #endif -.L4096: .word 4096 +.Lpsz: .long PAGE_SIZE /* * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); * Return the number of bytes NOT copied diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 462bfeac6d9c..59f4cc18235b 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -217,7 +217,6 @@ static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) { - extern unsigned long empty_zero_page[1024]; int codesize, reservedpages, datasize, initsize; int tmp; extern unsigned long memory_start; diff --git a/arch/sh/mm/pg-dma.c b/arch/sh/mm/pg-dma.c index 1406d2e348ca..bb23679369d6 100644 --- a/arch/sh/mm/pg-dma.c +++ b/arch/sh/mm/pg-dma.c @@ -39,8 +39,6 @@ static void copy_page_dma(void *to, void *from) static void clear_page_dma(void *to) { - extern unsigned long empty_zero_page[1024]; - /* * We get invoked quite early on, if the DMAC hasn't been initialized * yet, fall back on the slow manual implementation. diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S index 099fe8189bbe..500030eae7aa 100644 --- a/include/asm-sh/entry-macros.S +++ b/include/asm-sh/entry-macros.S @@ -23,8 +23,9 @@ #ifdef CONFIG_HAS_SR_RB stc r7_bank, \ti #else - mov #((THREAD_SIZE - 1)>> 8) ^ 0xff, \tmp + mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp shll8 \tmp + shll2 \tmp mov r15, \ti and \tmp, \ti #endif diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index fa625245051d..f87504abb43f 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -47,8 +47,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* Entries per level */ -#define PTRS_PER_PTE (1 << PTE_BITS) -#define PTRS_PER_PGD (1 << PGDIR_BITS) +#define PTRS_PER_PTE (PAGE_SIZE / 4) +#define PTRS_PER_PGD (PAGE_SIZE / 4) #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) #define FIRST_USER_ADDRESS 0 @@ -57,7 +57,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; /* * First 1MB map is used by fixed purpose. - * Currently only 4-enty (16kB) is used (see arch/sh/mm/cache.c) + * Currently only 4-entry (16kB) is used (see arch/sh/mm/cache.c) */ #define VMALLOC_START (P3SEG+0x00100000) #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 3ebc3f9039eb..0c01dc550819 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -90,13 +90,7 @@ static inline struct thread_info *current_thread_info(void) #endif #define free_thread_info(ti) kfree(ti) -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - stc r7_bank, reg - -#endif +#endif /* __ASSEMBLY__ */ /* * thread information flags -- cgit v1.2.3 From 6fc21b82ef74911887ced1aff8d37ce079bb8b36 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Nov 2006 12:10:23 +0900 Subject: sh: More flexible + SH7780 earlyprintk SCIF support. This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 18 +++++++++++++++++- arch/sh/kernel/early_printk.c | 44 +++++++++++++++++++++---------------------- drivers/serial/sh-sci.h | 1 + 3 files changed, 39 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 48479e014dac..dcceec95a2d5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -17,7 +17,18 @@ config SH_STANDARD_BIOS config EARLY_SCIF_CONSOLE bool "Use early SCIF console" - depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS + help + This enables an early console using a fixed SCIF port. This can + be used by platforms that are either not running the SH + standard BIOS, or do not wish to use the BIOS callbacks for the + serial I/O. + +config EARLY_SCIF_CONSOLE_PORT + hex "SCIF port for early console" + depends on EARLY_SCIF_CONSOLE + default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xfffe9800" if CPU_SUBTYPE_SH72060 + default "0xffe80000" if CPU_SH4 config EARLY_PRINTK bool "Early printk support" @@ -30,6 +41,11 @@ config EARLY_PRINTK when the kernel may crash or hang before the serial console is initialised. If unsure, say N. + On devices that are running SH-IPL and want to keep the port + initialization consistent while not using the BIOS callbacks, + select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using + the kernel command line option to toggle back and forth. + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index a00022722e9e..60340823798a 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #ifdef CONFIG_SH_STANDARD_BIOS #include @@ -62,17 +62,9 @@ static struct console bios_console = { #include #include "../../../drivers/serial/sh-sci.h" -#ifdef CONFIG_CPU_SH4 -#define SCIF_REG 0xffe80000 -#elif defined(CONFIG_CPU_SUBTYPE_SH72060) -#define SCIF_REG 0xfffe9800 -#else -#error "Undefined SCIF for this subtype" -#endif - static struct uart_port scif_port = { - .mapbase = SCIF_REG, - .membase = (char __iomem *)SCIF_REG, + .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, + .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; static void scif_sercon_putc(int c) @@ -113,23 +105,29 @@ static struct console scif_console = { .index = -1, }; +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +/* + * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 + * devices that aren't using sh-ipl+g. + */ static void scif_sercon_init(int baud) { - ctrl_outw(0, SCIF_REG + 8); - ctrl_outw(0, SCIF_REG); + ctrl_outw(0, scif_port.mapbase + 8); + ctrl_outw(0, scif_port.mapbase); /* Set baud rate */ ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, SCIF_REG + 4); - - ctrl_outw(12, SCIF_REG + 24); - ctrl_outw(8, SCIF_REG + 24); - ctrl_outw(0, SCIF_REG + 32); - ctrl_outw(0x60, SCIF_REG + 16); - ctrl_outw(0, SCIF_REG + 36); - ctrl_outw(0x30, SCIF_REG + 8); + (32 * baud) - 1, scif_port.mapbase + 4); + + ctrl_outw(12, scif_port.mapbase + 24); + ctrl_outw(8, scif_port.mapbase + 24); + ctrl_outw(0, scif_port.mapbase + 32); + ctrl_outw(0x60, scif_port.mapbase + 16); + ctrl_outw(0, scif_port.mapbase + 36); + ctrl_outw(0x30, scif_port.mapbase + 8); } -#endif +#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */ +#endif /* CONFIG_EARLY_SCIF_CONSOLE */ /* * Setup a default console, if more than one is compiled in, rely on the @@ -168,7 +166,7 @@ int __init setup_early_printk(char *opt) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#ifdef CONFIG_CPU_SH4 +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) scif_sercon_init(115200); #endif } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index b2bc0cfb4014..e4557cc4f74b 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -379,6 +379,7 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -- cgit v1.2.3 From 9f650cf2b811cfb605f10483eeb1dc86f43cdbcb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Dec 2006 12:01:43 +0900 Subject: sh: Fix store queue bitmap end. The end of the store queue bitmap is miscalculated when searching for a free range in sq_remap(), missing the PAGE_SHIFT shift that's done in sq_api_init(). This runs in to workloads where we can scan beyond the end of the bitmap. Spotted by Paul Jackson: http://marc.theaimsgroup.com/?l=linux-kernel&m=116493191224097&w Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/sq.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 7bcc73f9b8df..55f43506995a 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include @@ -67,6 +67,7 @@ void sq_flush_range(unsigned long start, unsigned int len) /* Wait for completion */ store_queue_barrier(); } +EXPORT_SYMBOL(sq_flush_range); static inline void sq_mapping_list_add(struct sq_mapping *map) { @@ -166,7 +167,7 @@ unsigned long sq_remap(unsigned long phys, unsigned int size, map->size = size; map->name = name; - page = bitmap_find_free_region(sq_bitmap, 0x04000000, + page = bitmap_find_free_region(sq_bitmap, 0x04000000 >> PAGE_SHIFT, get_order(map->size)); if (unlikely(page < 0)) { ret = -ENOSPC; @@ -193,6 +194,7 @@ out: kmem_cache_free(sq_cache, map); return ret; } +EXPORT_SYMBOL(sq_remap); /** * sq_unmap - Unmap a Store Queue allocation @@ -234,6 +236,7 @@ void sq_unmap(unsigned long vaddr) kmem_cache_free(sq_cache, map); } +EXPORT_SYMBOL(sq_unmap); /* * Needlessly complex sysfs interface. Unfortunately it doesn't seem like @@ -402,7 +405,3 @@ module_exit(sq_api_exit); MODULE_AUTHOR("Paul Mundt , M. R. Brown "); MODULE_DESCRIPTION("Simple API for SH-4 integrated Store Queues"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(sq_remap); -EXPORT_SYMBOL(sq_unmap); -EXPORT_SYMBOL(sq_flush_range); -- cgit v1.2.3 From bca7c20764c83a44c7b8b0831089922d56a3a9a2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Dec 2006 12:14:11 +0900 Subject: sh: Get the PGD right in oops case with 64-bit PTEs. Previously this was using a static pgd shift in the reporting code, simply flip this to PGDIR_SHIFT which does the right thing depending on varying PTE magnitudes on the SH-X2 MMU. While we're at it, and since it's been recently added, use get_TTB() for fetching the TTB, rather than the open coded instructions. Signed-off-by: Paul Mundt --- arch/sh/mm/fault.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 123fb80c859d..cfeefc10e254 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -174,11 +174,9 @@ no_context: printk(KERN_ALERT "Unable to handle kernel paging request"); printk(" at virtual address %08lx\n", address); printk(KERN_ALERT "pc = %08lx\n", regs->pc); - asm volatile("mov.l %1, %0" - : "=r" (page) - : "m" (__m(MMU_TTB))); + page = (unsigned long)get_TTB(); if (page) { - page = ((unsigned long *) page)[address >> 22]; + page = ((unsigned long *) page)[address >> PGDIR_SHIFT]; printk(KERN_ALERT "*pde = %08lx\n", page); if (page & _PAGE_PRESENT) { page &= PAGE_MASK; -- cgit v1.2.3 From e74b56800e78a10bc09b56a87831876a1d9d09ae Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Dec 2006 13:12:05 +0900 Subject: sh: Turn off IRQs around get_timer_offset() calls. Since all of the sys_timer sources currently do this on their own within the ->get_offset() path, it's more sensible to just have the caller take care of it when grabbing xtime_lock. Incidentally, this is more in line with what others (ie, ARM) are doing already. Signed-off-by: Paul Mundt --- arch/sh/kernel/time.c | 13 +++++++++---- arch/sh/kernel/timers/timer-cmt.c | 9 +-------- arch/sh/kernel/timers/timer-mtu2.c | 10 +--------- arch/sh/kernel/timers/timer-tmu.c | 9 +-------- 4 files changed, 12 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 57e708d7b52d..c55d6f217a46 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -50,15 +50,20 @@ unsigned long long __attribute__ ((weak)) sched_clock(void) #ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { + unsigned long flags; unsigned long seq; unsigned long usec, sec; do { - seq = read_seqbegin(&xtime_lock); + /* + * Turn off IRQs when grabbing xtime_lock, so that + * the sys_timer get_offset code doesn't have to handle it. + */ + seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = get_timer_offset(); sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry(&xtime_lock, seq)); + usec += xtime.tv_nsec / NSEC_PER_USEC; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); while (usec >= 1000000) { usec -= 1000000; @@ -85,7 +90,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * get_timer_offset(); + nsec -= get_timer_offset() * NSEC_PER_USEC; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 24b03996da51..95581dccbbfd 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -46,13 +45,9 @@ #error "Unknown CPU SUBTYPE" #endif -static DEFINE_SPINLOCK(cmt0_lock); - static unsigned long cmt_timer_get_offset(void) { int count; - unsigned long flags; - static unsigned short count_p = 0xffff; /* for the first call after boot */ static unsigned long jiffies_p = 0; @@ -61,7 +56,6 @@ static unsigned long cmt_timer_get_offset(void) */ unsigned long jiffies_t; - spin_lock_irqsave(&cmt0_lock, flags); /* timer count may underflow right here */ count = ctrl_inw(CMT_CMCOR_0); count -= ctrl_inw(CMT_CMCNT_0); @@ -88,7 +82,6 @@ static unsigned long cmt_timer_get_offset(void) jiffies_p = jiffies_t; count_p = count; - spin_unlock_irqrestore(&cmt0_lock, flags); count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; @@ -122,7 +115,7 @@ static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) static struct irqaction cmt_irq = { .name = "timer", .handler = cmt_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .mask = CPU_MASK_NONE, }; diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index 92c98b5b11ea..201f0a62132f 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include @@ -28,9 +27,6 @@ * However, we can implement channel cascade if we go the overflow route and * get away with using 2 MTU2 channels as a 32-bit timer. */ - -static DEFINE_SPINLOCK(mtu2_lock); - #define MTU2_TSTR 0xfffe4280 #define MTU2_TCR_1 0xfffe4380 #define MTU2_TMDR_1 0xfffe4381 @@ -55,8 +51,6 @@ static DEFINE_SPINLOCK(mtu2_lock); static unsigned long mtu2_timer_get_offset(void) { int count; - unsigned long flags; - static int count_p = 0x7fff; /* for the first call after boot */ static unsigned long jiffies_p = 0; @@ -65,7 +59,6 @@ static unsigned long mtu2_timer_get_offset(void) */ unsigned long jiffies_t; - spin_lock_irqsave(&mtu2_lock, flags); /* timer count may underflow right here */ count = ctrl_inw(MTU2_TCNT_1); /* read the latched count */ @@ -90,7 +83,6 @@ static unsigned long mtu2_timer_get_offset(void) jiffies_p = jiffies_t; count_p = count; - spin_unlock_irqrestore(&mtu2_lock, flags); count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; @@ -118,7 +110,7 @@ static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id) static struct irqaction mtu2_irq = { .name = "timer", .handler = mtu2_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .mask = CPU_MASK_NONE, }; diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 06a70db7386d..b9ed8a387555 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -31,13 +30,9 @@ #define TMU0_TCR_CALIB 0x0000 -static DEFINE_SPINLOCK(tmu0_lock); - static unsigned long tmu_timer_get_offset(void) { int count; - unsigned long flags; - static int count_p = 0x7fffffff; /* for the first call after boot */ static unsigned long jiffies_p = 0; @@ -46,7 +41,6 @@ static unsigned long tmu_timer_get_offset(void) */ unsigned long jiffies_t; - spin_lock_irqsave(&tmu0_lock, flags); /* timer count may underflow right here */ count = ctrl_inl(TMU0_TCNT); /* read the latched count */ @@ -72,7 +66,6 @@ static unsigned long tmu_timer_get_offset(void) jiffies_p = jiffies_t; count_p = count; - spin_unlock_irqrestore(&tmu0_lock, flags); count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; @@ -106,7 +99,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) static struct irqaction tmu_irq = { .name = "timer", .handler = tmu_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .mask = CPU_MASK_NONE, }; -- cgit v1.2.3 From 1d118562c2067a42d0e8f70671a4ce27d7c6ffee Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Dec 2006 13:15:14 +0900 Subject: sh: Clock framework tidying. This syncs up the SH clock framework with the linux/clk.h API, for which there were only some minor changes required, namely the clk_get() dev_id and subsequent callsites. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/clock.c | 27 +++++++++++++++++++++++++-- arch/sh/kernel/cpu/sh3/clock-sh7709.c | 2 +- arch/sh/kernel/cpu/sh4/clock-sh4-202.c | 4 ++-- arch/sh/kernel/cpu/sh4/clock-sh7780.c | 2 +- arch/sh/kernel/timers/timer-cmt.c | 4 ++-- arch/sh/kernel/timers/timer-mtu2.c | 2 +- arch/sh/kernel/timers/timer-tmu.c | 2 +- drivers/serial/sh-sci.c | 6 +++--- include/asm-sh/clock.h | 12 ++---------- 9 files changed, 38 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 51ec64cdf348..abb586b12565 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -5,9 +5,11 @@ * * This clock framework is derived from the OMAP version by: * - * Copyright (C) 2004 Nokia Corporation + * Copyright (C) 2004 - 2005 Nokia Corporation * Written by Tuukka Tikkanen * + * Modified for omap shared clock framework by Tony Lindgren + * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -20,6 +22,7 @@ #include #include #include +#include #include #include @@ -195,17 +198,37 @@ void clk_recalc_rate(struct clk *clk) propagate_rate(clk); } -struct clk *clk_get(const char *id) +/* + * Returns a clock. Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use clock name only. + */ +struct clk *clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; mutex_lock(&clock_list_sem); + list_for_each_entry(p, &clock_list, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + list_for_each_entry(p, &clock_list, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } + +found: mutex_unlock(&clock_list_sem); return clk; diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c index 10461a745e5f..b791a29fdb62 100644 --- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c @@ -24,7 +24,7 @@ static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 }; static void set_bus_parent(struct clk *clk) { - struct clk *bus_clk = clk_get("bus_clk"); + struct clk *bus_clk = clk_get(NULL, "bus_clk"); clk->parent = bus_clk; clk_put(bus_clk); } diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index bfdf5fe8d948..fa2019aabd74 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -97,7 +97,7 @@ static void shoc_clk_recalc(struct clk *clk) static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate) { - struct clk *bclk = clk_get("bus_clk"); + struct clk *bclk = clk_get(NULL, "bus_clk"); unsigned long bclk_rate = clk_get_rate(bclk); clk_put(bclk); @@ -151,7 +151,7 @@ static struct clk *sh4202_onchip_clocks[] = { static int __init sh4202_clk_init(void) { - struct clk *clk = clk_get("master_clk"); + struct clk *clk = clk_get(NULL, "master_clk"); int i; for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) { diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7780.c b/arch/sh/kernel/cpu/sh4/clock-sh7780.c index 93ad367342c9..9e6a216750c8 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh7780.c @@ -98,7 +98,7 @@ static struct clk *sh7780_onchip_clocks[] = { static int __init sh7780_clk_init(void) { - struct clk *clk = clk_get("master_clk"); + struct clk *clk = clk_get(NULL, "master_clk"); int i; for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) { diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 95581dccbbfd..a574b93a4e7b 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -124,7 +124,7 @@ static void cmt_clk_init(struct clk *clk) u8 divisor = CMT_CMCSR_INIT & 0x3; ctrl_inw(CMT_CMCSR_0); ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); - clk->parent = clk_get("module_clk"); + clk->parent = clk_get(NULL, "module_clk"); clk->rate = clk->parent->rate / (8 << (divisor << 1)); } @@ -164,7 +164,7 @@ static int cmt_timer_init(void) setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); - cmt0_clk.parent = clk_get("module_clk"); + cmt0_clk.parent = clk_get(NULL, "module_clk"); cmt_timer_stop(); diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c index 201f0a62132f..fffcd1c09873 100644 --- a/arch/sh/kernel/timers/timer-mtu2.c +++ b/arch/sh/kernel/timers/timer-mtu2.c @@ -161,7 +161,7 @@ static int mtu2_timer_init(void) setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq); - mtu2_clk1.parent = clk_get("module_clk"); + mtu2_clk1.parent = clk_get(NULL, "module_clk"); ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3); diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index b9ed8a387555..e060e71d0785 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -144,7 +144,7 @@ static int tmu_timer_init(void) setup_irq(CONFIG_SH_TIMER_IRQ, &tmu_irq); - tmu0_clk.parent = clk_get("module_clk"); + tmu0_clk.parent = clk_get(NULL, "module_clk"); /* Start TMU0 */ tmu_timer_stop(); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index cfcc3caf49d8..3b5f19ec2126 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -775,7 +775,7 @@ static int sci_notifier(struct notifier_block *self, * * Clean this up later.. */ - clk = clk_get("module_clk"); + clk = clk_get(NULL, "module_clk"); port->uartclk = clk_get_rate(clk) * 16; clk_put(clk); } @@ -960,7 +960,7 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, default: { #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) - struct clk *clk = clk_get("module_clk"); + struct clk *clk = clk_get(NULL, "module_clk"); t = SCBRR_VALUE(baud, clk_get_rate(clk)); clk_put(clk); #else @@ -1128,7 +1128,7 @@ static void __init sci_init_ports(void) * XXX: We should use a proper SCI/SCIF clock */ { - struct clk *clk = clk_get("module_clk"); + struct clk *clk = clk_get(NULL, "module_clk"); sci_ports[i].port.uartclk = clk_get_rate(clk) * 16; clk_put(clk); } diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index fdfb75b30f0d..1df92807f8c5 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -4,6 +4,7 @@ #include #include #include +#include struct clk; @@ -18,7 +19,7 @@ struct clk_ops { struct clk { struct list_head node; const char *name; - + int id; struct module *owner; struct clk *parent; @@ -40,22 +41,13 @@ void arch_init_clk_ops(struct clk_ops **, int type); int clk_init(void); int __clk_enable(struct clk *); -int clk_enable(struct clk *); - void __clk_disable(struct clk *); -void clk_disable(struct clk *); -int clk_set_rate(struct clk *, unsigned long rate); -unsigned long clk_get_rate(struct clk *); void clk_recalc_rate(struct clk *); -struct clk *clk_get(const char *id); -void clk_put(struct clk *); - int clk_register(struct clk *); void clk_unregister(struct clk *); int show_clocks(struct seq_file *m); #endif /* __ASM_SH_CLOCK_H */ - -- cgit v1.2.3 From bd156147eb63ae525e0ac67868e41a808f03c532 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Dec 2006 13:23:47 +0900 Subject: sh: dyntick infrastructure. This adds basic NO_IDLE_HZ support to the SH timer API so timers are able to wire it up. Taken from the ARM version, as it fit in to our API with very few changes needed. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 18 +++++++ arch/sh/kernel/time.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++- include/asm-sh/timer.h | 21 +++++++++ 3 files changed, 162 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 48308dc86e33..aa1ebc561b84 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -423,6 +423,24 @@ config SH_TIMER_IRQ default "140" if CPU_SUBTYPE_SH7206 default "16" +config NO_IDLE_HZ + bool "Dynamic tick timer" + help + Select this option if you want to disable continuous timer ticks + and have them programmed to occur as required. This option saves + power as the system can remain in idle state for longer. + + By default dynamic tick is disabled during the boot, and can be + manually enabled with: + + echo 1 > /sys/devices/system/timer/timer0/dyn_tick + + Alternatively, if you want dynamic tick automatically enabled + during boot, pass "dyntick=enable" via the kernel command string. + + Please note that dynamic tick may affect the accuracy of + timekeeping on some platforms depending on the implementation. + config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index c55d6f217a46..1b91c7214979 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -174,6 +174,108 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; +#ifdef CONFIG_NO_IDLE_HZ +static int timer_dyn_tick_enable(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + spin_lock_irqsave(&dyn_tick->lock, flags); + ret = 0; + if (!(dyn_tick->state & DYN_TICK_ENABLED)) { + ret = dyn_tick->enable(); + + if (ret == 0) + dyn_tick->state |= DYN_TICK_ENABLED; + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); + } + + return ret; +} + +static int timer_dyn_tick_disable(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + spin_lock_irqsave(&dyn_tick->lock, flags); + ret = 0; + if (dyn_tick->state & DYN_TICK_ENABLED) { + ret = dyn_tick->disable(); + + if (ret == 0) + dyn_tick->state &= ~DYN_TICK_ENABLED; + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); + } + + return ret; +} + +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ +void timer_dyn_reprogram(void) +{ + struct dyn_tick_timer *dyn_tick = sys_timer->dyn_tick; + unsigned long next, seq, flags; + + if (!dyn_tick) + return; + + spin_lock_irqsave(&dyn_tick->lock, flags); + if (dyn_tick->state & DYN_TICK_ENABLED) { + next = next_timer_interrupt(); + do { + seq = read_seqbegin(&xtime_lock); + dyn_tick->reprogram(next - jiffies); + } while (read_seqretry(&xtime_lock, seq)); + } + spin_unlock_irqrestore(&dyn_tick->lock, flags); +} + +static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", + (sys_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); +} + +static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned int enable = simple_strtoul(buf, NULL, 2); + + if (enable) + timer_dyn_tick_enable(); + else + timer_dyn_tick_disable(); + + return count; +} +static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); + +/* + * dyntick=enable|disable + */ +static char dyntick_str[4] __initdata = ""; + +static int __init dyntick_setup(char *str) +{ + if (str) + strlcpy(dyntick_str, str, sizeof(dyntick_str)); + return 1; +} + +__setup("dyntick=", dyntick_setup); +#endif + static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -181,7 +283,22 @@ static int __init timer_init_sysfs(void) return ret; sys_timer->dev.cls = &timer_sysclass; - return sysdev_register(&sys_timer->dev); + ret = sysdev_register(&sys_timer->dev); + +#ifdef CONFIG_NO_IDLE_HZ + if (ret == 0 && sys_timer->dyn_tick) { + ret = sysdev_create_file(&sys_timer->dev, &attr_dyn_tick); + + /* + * Turn on dynamic tick after calibrate delay + * for correct bogomips + */ + if (ret == 0 && dyntick_str[0] == 'e') + ret = timer_dyn_tick_enable(); + } +#endif + + return ret; } device_initcall(timer_init_sysfs); @@ -205,6 +322,11 @@ void __init time_init(void) sys_timer = get_sys_timer(); printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); +#ifdef CONFIG_NO_IDLE_HZ + if (sys_timer->dyn_tick) + spin_lock_init(&sys_timer->dyn_tick->lock); +#endif + #if defined(CONFIG_SH_KGDB) /* * Set up kgdb as requested. We do it here because the serial diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index 5a014bca9d58..17b5e76a4c31 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -18,8 +18,29 @@ struct sys_timer { struct sys_device dev; struct sys_timer_ops *ops; + +#ifdef CONFIG_NO_IDLE_HZ + struct dyn_tick_timer *dyn_tick; +#endif }; +#ifdef CONFIG_NO_IDLE_HZ +#define DYN_TICK_ENABLED (1 << 1) + +struct dyn_tick_timer { + spinlock_t lock; + unsigned int state; /* Current state */ + int (*enable)(void); /* Enables dynamic tick */ + int (*disable)(void); /* Disables dynamic tick */ + void (*reprogram)(unsigned long); /* Reprograms the timer */ + int (*handler)(int, void *); +}; + +void timer_dyn_reprogram(void); +#else +#define timer_dyn_reprogram() do { } while (0) +#endif + #define TICK_SIZE (tick_nsec / 1000) extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; -- cgit v1.2.3 From afbfb52e47273a440df33274452c603e8c332de2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Dec 2006 18:17:28 +0900 Subject: sh: stacktrace/lockdep/irqflags tracing support. Wire up all of the essentials for lockdep.. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 8 +++ arch/sh/Kconfig.debug | 4 ++ arch/sh/kernel/Makefile | 1 + arch/sh/kernel/cpu/sh2/entry.S | 16 ++++++ arch/sh/kernel/cpu/sh3/entry.S | 2 +- arch/sh/kernel/entry-common.S | 64 ++++++++++++++++++++- arch/sh/kernel/stacktrace.c | 43 ++++++++++++++ arch/sh/mm/fault.c | 3 + include/asm-sh/irqflags.h | 123 +++++++++++++++++++++++++++++++++++++++++ include/asm-sh/rwsem.h | 27 ++++++++- include/asm-sh/system.h | 101 +-------------------------------- 11 files changed, 289 insertions(+), 103 deletions(-) create mode 100644 arch/sh/kernel/stacktrace.c create mode 100644 include/asm-sh/irqflags.h (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index aa1ebc561b84..013732074d35 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -51,6 +51,14 @@ config GENERIC_TIME config ARCH_MAY_HAVE_PC_FDC bool +config STACKTRACE_SUPPORT + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + source "init/Kconfig" menu "System type" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index dcceec95a2d5..66a25ef4ef1b 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -1,5 +1,9 @@ menu "Kernel hacking" +config TRACE_IRQFLAGS_SUPPORT + bool + default y + source "lib/Kconfig.debug" config SH_STANDARD_BIOS diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 50d54c24d76a..99c7e5249f7a 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 298d9191909d..34d51b3745ea 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -184,6 +184,11 @@ trap_entry: add r15,r8 mov.l r9,@r8 mov r9,r8 +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r9 + jsr @r9 + nop +#endif sti bra system_call nop @@ -193,6 +198,9 @@ trap_entry: 2: .long break_point_trap_software 3: .long NR_syscalls 4: .long sys_call_table +#ifdef CONFIG_TRACE_IRQFLAGS +5: .long trace_hardirqs_on +#endif #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ @@ -255,6 +263,11 @@ ENTRY(address_error_handler) restore_all: cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif mov r15,r0 mov.l $cpu_mode,r2 mov #OFF_SR,r3 @@ -307,6 +320,9 @@ $current_thread_info: .long __current_thread_info $cpu_mode: .long __cpu_mode +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_off +#endif ! common exception handler #include "../../entry-common.S" diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 7ba3dcbe7504..8c0dc2700c69 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -140,7 +140,7 @@ call_dpf: mov.l 1f, r0 mov.l @r0, r6 ! address mov.l 3f, r0 - sti + jmp @r0 mov r15, r4 ! regs diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 8f96d21fcb1c..29136a35d7c7 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -100,6 +100,11 @@ debug_trap: .align 2 ENTRY(exception_error) ! +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif sti mov.l 2f, r0 jmp @r0 @@ -109,10 +114,18 @@ ENTRY(exception_error) .align 2 1: .long break_point_trap_software 2: .long do_exception_error +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_on +#endif .align 2 ret_from_exception: preempt_stop() +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 4f, r0 + jsr @r0 + nop +#endif ENTRY(ret_from_irq) ! mov #OFF_SR, r0 @@ -143,6 +156,11 @@ need_resched: mov.l 1f, r0 mov.l r0, @(TI_PRE_COUNT,r8) +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 3f, r0 + jsr @r0 + nop +#endif sti mov.l 2f, r0 jsr @r0 @@ -150,9 +168,15 @@ need_resched: mov #0, r0 mov.l r0, @(TI_PRE_COUNT,r8) cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 4f, r0 + jsr @r0 + nop +#endif bra need_resched nop + noresched: bra __restore_all nop @@ -160,11 +184,20 @@ noresched: .align 2 1: .long PREEMPT_ACTIVE 2: .long schedule +#ifdef CONFIG_TRACE_IRQFLAGS +3: .long trace_hardirqs_on +4: .long trace_hardirqs_off +#endif #endif ENTRY(resume_userspace) ! r8: current_thread_info cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags tst #_TIF_WORK_MASK, r0 bt/s __restore_all @@ -210,6 +243,11 @@ work_resched: jsr @r1 ! schedule nop cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif ! mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags tst #_TIF_WORK_MASK, r0 @@ -221,6 +259,10 @@ work_resched: 1: .long schedule 2: .long do_notify_resume 3: .long restore_all +#ifdef CONFIG_TRACE_IRQFLAGS +4: .long trace_hardirqs_on +5: .long trace_hardirqs_off +#endif .align 2 syscall_exit_work: @@ -229,6 +271,11 @@ syscall_exit_work: tst #_TIF_SYSCALL_TRACE, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r0 + jsr @r0 + nop +#endif sti ! XXX setup arguments... mov.l 4f, r0 ! do_syscall_trace @@ -265,7 +312,7 @@ syscall_trace_entry: mov.l r0, @(OFF_R0,r15) ! Return value __restore_all: - mov.l 1f,r0 + mov.l 1f, r0 jmp @r0 nop @@ -331,7 +378,13 @@ ENTRY(system_call) mov #OFF_TRA, r9 add r15, r9 mov.l r8, @r9 ! set TRA value to tra +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 5f, r10 + jsr @r10 + nop +#endif sti + ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 @@ -355,6 +408,11 @@ syscall_call: ! syscall_exit: cli +#ifdef CONFIG_TRACE_IRQFLAGS + mov.l 6f, r0 + jsr @r0 + nop +#endif ! get_current_thread_info r8, r0 mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags @@ -369,3 +427,7 @@ syscall_exit: 2: .long NR_syscalls 3: .long sys_call_table 4: .long do_syscall_trace +#ifdef CONFIG_TRACE_IRQFLAGS +5: .long trace_hardirqs_on +6: .long trace_hardirqs_off +#endif diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c new file mode 100644 index 000000000000..0d5268afe80f --- /dev/null +++ b/arch/sh/kernel/stacktrace.c @@ -0,0 +1,43 @@ +/* + * arch/sh/kernel/stacktrace.c + * + * Stack trace management functions + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace, struct task_struct *task) +{ + unsigned long *sp; + + if (!task) + task = current; + if (task == current) + sp = (unsigned long *)current_stack_pointer; + else + sp = (unsigned long *)task->thread.sp; + + while (!kstack_end(sp)) { + unsigned long addr = *sp++; + + if (__kernel_text_address(addr)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = addr; + if (trace->nr_entries >= trace->max_entries) + break; + } + } +} diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index cfeefc10e254..716ebf568af2 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -37,6 +37,9 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, int si_code; siginfo_t info; + trace_hardirqs_on(); + local_irq_enable(); + #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) kgdb_bus_err_hook(); diff --git a/include/asm-sh/irqflags.h b/include/asm-sh/irqflags.h new file mode 100644 index 000000000000..9dedc1b693e3 --- /dev/null +++ b/include/asm-sh/irqflags.h @@ -0,0 +1,123 @@ +#ifndef __ASM_SH_IRQFLAGS_H +#define __ASM_SH_IRQFLAGS_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags != 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if ((flags & 0xf0) != 0xf0) + raw_local_irq_enable(); +} + +#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/include/asm-sh/rwsem.h b/include/asm-sh/rwsem.h index 9d2aea5e8488..4931ba817d73 100644 --- a/include/asm-sh/rwsem.h +++ b/include/asm-sh/rwsem.h @@ -25,11 +25,21 @@ struct rw_semaphore { #define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) spinlock_t wait_lock; struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif }; +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + #define __RWSEM_INITIALIZER(name) \ { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ - LIST_HEAD_INIT((name).wait_list) } + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) @@ -39,6 +49,16 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + static inline void init_rwsem(struct rw_semaphore *sem) { sem->count = RWSEM_UNLOCKED_VALUE; @@ -141,6 +161,11 @@ static inline void __downgrade_write(struct rw_semaphore *sem) rwsem_downgrade_wake(sem); } +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + /* * implement exchange and add functionality */ diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index 3340126f4e0f..b1e42e7f998b 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -6,6 +6,7 @@ * Copyright (C) 2002 Paul Mundt */ +#include #include /* @@ -131,103 +132,6 @@ static inline unsigned long tas(volatile int *m) #define set_mb(var, value) do { xchg(&var, value); } while (0) -/* Interrupt Control */ -#ifdef CONFIG_CPU_HAS_SR_RB -static inline void local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__("stc sr, %0\n\t" - "and %1, %0\n\t" - "stc r6_bank, %1\n\t" - "or %1, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory"); -} -#else -static inline void local_irq_enable(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ( - "stc sr, %0\n\t" - "and %1, %0\n\t" - "ldc %0, sr\n\t" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x000000f0) - : "memory"); -} -#endif - -static inline void local_irq_disable(void) -{ - unsigned long __dummy; - __asm__ __volatile__("stc sr, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr" - : "=&z" (__dummy) - : /* no inputs */ - : "memory"); -} - -static inline void set_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ("stc sr, %0\n\t" - "or %2, %0\n\t" - "and %3, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy0), "=r" (__dummy1) - : "r" (0x10000000), "r" (0xffffff0f) - : "memory"); -} - -static inline void clear_bl_bit(void) -{ - unsigned long __dummy0, __dummy1; - - __asm__ __volatile__ ("stc sr, %0\n\t" - "and %2, %0\n\t" - "ldc %0, sr" - : "=&r" (__dummy0), "=r" (__dummy1) - : "1" (~0x10000000) - : "memory"); -} - -#define local_save_flags(x) \ - __asm__("stc sr, %0; and #0xf0, %0" : "=&z" (x) :/**/: "memory" ) - -#define irqs_disabled() \ -({ \ - unsigned long flags; \ - local_save_flags(flags); \ - (flags != 0); \ -}) - -static inline unsigned long local_irq_save(void) -{ - unsigned long flags, __dummy; - - __asm__ __volatile__("stc sr, %1\n\t" - "mov %1, %0\n\t" - "or #0xf0, %0\n\t" - "ldc %0, sr\n\t" - "mov %1, %0\n\t" - "and #0xf0, %0" - : "=&z" (flags), "=&r" (__dummy) - :/**/ - : "memory" ); - return flags; -} - -#define local_irq_restore(x) do { \ - if ((x & 0x000000f0) != 0x000000f0) \ - local_irq_enable(); \ -} while (0) - /* * Jump to P2 area. * When handling TLB or caches, we need to do it from P2 area. @@ -264,9 +168,6 @@ do { \ : "=&r" (__dummy)); \ } while (0) -/* For spinlocks etc */ -#define local_irq_save(x) x = local_irq_save() - static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) { unsigned long flags, retval; -- cgit v1.2.3 From 0c020e3dfb9429a3b31669a5ac2b86dd675c1ad2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Dec 2006 10:43:44 +0900 Subject: sh: platform_pata support for R7780RP This adds a platform device for the directly connected CF interface on R7780RP boards, for use with the pata_platform libata driver. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/r7780rp/setup.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index c331caeb694b..9f89c8de9db9 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -44,8 +44,37 @@ static struct platform_device m66596_usb_host_device = { .resource = m66596_usb_host_resources, }; +static struct resource cf_ide_resources[] = { + [0] = { + .start = 0x1f0, + .end = 0x1f0 + 8, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 0x1f0 + 0x206, + .end = 0x1f0 + 8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { +#ifdef CONFIG_SH_R7780MP + .start = 1, +#else + .start = 4, +#endif + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + static struct platform_device *r7780rp_devices[] __initdata = { &m66596_usb_host_device, + &cf_ide_device, }; static int __init r7780rp_devices_setup(void) -- cgit v1.2.3 From 9b8c90eb0d916f6802f8bbac79f61aca6ac533e8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Dec 2006 11:07:51 +0900 Subject: sh: show held locks in stack trace with lockdep. Follows the same change as other architectures.. Signed-off-by: Paul Mundt --- arch/sh/kernel/traps.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 0ee298079d82..3762d9dc2046 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -872,6 +873,11 @@ void show_trace(struct task_struct *tsk, unsigned long *sp, } printk("\n"); + + if (!tsk) + tsk = current; + + debug_show_held_locks(tsk); } void show_stack(struct task_struct *tsk, unsigned long *sp) -- cgit v1.2.3 From f36af73304555849985b1fb5c0821c1bfab3a5a0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Dec 2006 11:08:49 +0900 Subject: sh: set KBUILD_IMAGE to something sensible. This was missing for sh too, wire it up.. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 7f4516c3f83d..d10bba5e1074 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -58,7 +58,9 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -R .stab -R .stabstr -S # never be used by anyone. Use a board-specific defconfig that has a # reasonable chance of being current instead. # -KBUILD_DEFCONFIG := rts7751r2d_defconfig +KBUILD_DEFCONFIG := r7780rp_defconfig + +KBUILD_IMAGE := arch/sh/boot/zImage # # Choosing incompatible machines durings configuration will result in -- cgit v1.2.3 From 65e5d90de6dba9975332dac4f849b81f663e16fa Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Dec 2006 11:24:48 +0900 Subject: sh: compile fixes for header cleanup. Since some header inclusion paths were cleaned up, compilation broke. Add in the headers we need directly to build again. Signed-off-by: Paul Mundt --- arch/sh/kernel/time.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 1b91c7214979..c206c9504c4b 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include -- cgit v1.2.3 From fe9687dec0400c6de7187ab5efa91facd958ca84 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 6 Dec 2006 12:02:01 +0900 Subject: sh: update r7780rp defconfig. Signed-off-by: Paul Mundt --- arch/sh/configs/r7780rp_defconfig | 69 +++++++++++++++++++++++++++------------ 1 file changed, 49 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig index 34e2046c3213..2b75b4896ba5 100644 --- a/arch/sh/configs/r7780rp_defconfig +++ b/arch/sh/configs/r7780rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc3 -# Tue Oct 31 12:32:06 2006 +# Linux kernel version: 2.6.19 +# Wed Dec 6 11:59:38 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -11,6 +11,8 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -37,6 +39,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -118,6 +121,8 @@ CONFIG_SH_R7780RP=y # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set # CONFIG_SH_SHMIN is not set +# CONFIG_SH_7206_SOLUTION_ENGINE is not set +# CONFIG_SH_7619_SOLUTION_ENGINE is not set # CONFIG_SH_UNKNOWN is not set # @@ -130,6 +135,12 @@ CONFIG_CPU_SH4A=y # SH-2 Processor Support # # CONFIG_CPU_SUBTYPE_SH7604 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set + +# +# SH-2A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH7206 is not set # # SH-3 Processor Support @@ -165,6 +176,7 @@ CONFIG_CPU_SH4A=y # # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y +# CONFIG_CPU_SUBTYPE_SH7785 is not set # # SH4AL-DSP Processor Support @@ -181,8 +193,14 @@ CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 # CONFIG_32BIT is not set CONFIG_VSYSCALL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -204,12 +222,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y # CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_INTC2_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y # # Timer support @@ -220,6 +240,8 @@ CONFIG_SH_TMU=y # R7780RP options # CONFIG_SH_R7780MP=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_NO_IDLE_HZ=y CONFIG_SH_PCLK_FREQ=32000000 # @@ -237,6 +259,11 @@ CONFIG_SH_PCLK_FREQ=32000000 # # CONFIG_HD6446X_SERIES is not set +# +# Additional SuperH Device Drivers +# +CONFIG_PUSH_SWITCH=y + # # Kernel features # @@ -244,7 +271,7 @@ CONFIG_SH_PCLK_FREQ=32000000 CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_KEXEC is not set +CONFIG_KEXEC=y # CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set @@ -278,10 +305,7 @@ CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # # PCI Hotplug Support # -CONFIG_HOTPLUG_PCI=y -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -341,6 +365,7 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set @@ -572,6 +598,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y # # Multi-device support (RAID and LVM) @@ -688,6 +715,7 @@ CONFIG_R8169=y # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -830,10 +858,6 @@ CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set @@ -1020,7 +1044,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -1052,7 +1076,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -1153,28 +1177,33 @@ CONFIG_NLS_ISO8859_1=y # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=m # # Kernel hacking # -# CONFIG_PRINTK_TIME is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set @@ -1184,7 +1213,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set +CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_KGDB is not set -- cgit v1.2.3 From ea0f8feaa041f3ccec3d6b8ee51325b177daef06 Mon Sep 17 00:00:00 2001 From: Jamie Lenehan Date: Wed, 6 Dec 2006 12:05:02 +0900 Subject: sh: sh775x/titan fixes for irq header changes. The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: Jamie Lenehan Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 + arch/sh/boards/titan/setup.c | 27 +++++---- arch/sh/drivers/pci/ops-titan.c | 24 ++++---- arch/sh/kernel/cpu/irq/Makefile | 3 +- arch/sh/kernel/cpu/irq/ipr.c | 103 ++-------------------------------- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 70 +++++++++++++++++++++++ arch/sh/kernel/irq.c | 25 ++++++++- arch/sh/mm/Kconfig | 5 ++ include/asm-sh/irq.h | 32 +++++++++-- include/asm-sh/titan.h | 32 +---------- 10 files changed, 165 insertions(+), 159 deletions(-) (limited to 'arch') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 013732074d35..d83d64af31f2 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -375,6 +375,9 @@ config CPU_HAS_MASKREG_IRQ config CPU_HAS_INTC2_IRQ bool +config CPU_HAS_IPR_IRQ + bool + config CPU_HAS_SR_RB bool "CPU has SR.RB" depends on CPU_SH3 || CPU_SH4 diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index a6046d93758b..6bcd939bfaed 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -1,26 +1,30 @@ /* - * Setup for Titan + * arch/sh/boards/titan/setup.c - Setup for Titan + * + * Copyright (C) 2006 Jamie Lenehan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include -#include +#include #include #include -extern void __init pcibios_init_platform(void); - static struct ipr_data titan_ipr_map[] = { - { TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, - { TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, - { TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, - { TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, + /* IRQ, IPR idx, shift, prio */ + { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ + { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ + { TITAN_IRQ_MPCIA, 3, 4, 8 }, /* mPCI A (top) */ + { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ }; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - + ipr_irq_enable_irlm(); + /* register ipr irqs */ make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); } @@ -47,6 +51,5 @@ struct sh_machine_vector mv_titan __initmv = { .mv_ioport_map = titan_ioport_map, .mv_init_irq = init_titan_irq, - .mv_init_pci = pcibios_init_platform, }; ALIAS_MV(titan) diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index cd56d53375e7..ac8ee2312cd8 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -15,25 +15,21 @@ #include #include #include -#include +#include #include #include "pci-sh4.h" +static char titan_irq_tab[] __initdata = { + TITAN_IRQ_WAN, + TITAN_IRQ_LAN, + TITAN_IRQ_MPCIA, + TITAN_IRQ_MPCIB, + TITAN_IRQ_USB, +}; + int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - int irq = -1; - - switch (slot) { - case 0: irq = TITAN_IRQ_WAN; break; /* eth0 (WAN) */ - case 1: irq = TITAN_IRQ_LAN; break; /* eth1 (LAN) */ - case 2: irq = TITAN_IRQ_MPCIA; break; /* mPCI A */ - case 3: irq = TITAN_IRQ_MPCIB; break; /* mPCI B */ - case 4: irq = TITAN_IRQ_USB; break; /* USB */ - default: - printk(KERN_INFO "PCI: Bad IRQ mapping " - "request for slot %d\n", slot); - return -1; - } + int irq = titan_irq_tab[slot]; printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", slot, pin - 1 + 'A', irq); diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 1c034c283f59..0049d217561a 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -1,8 +1,9 @@ # # Makefile for the Linux/SuperH CPU-specifc IRQ handlers. # -obj-y += ipr.o imask.o +obj-y += imask.o +obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index a181ccdf2906..35eb5751a3aa 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -25,17 +25,15 @@ static void disable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); - int shift = p->shift*4; /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr); + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); } static void enable_ipr_irq(unsigned int irq) { struct ipr_data *p = get_irq_chip_data(irq); - int shift = p->shift*4; /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr); + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); } static struct irq_chip ipr_irq_chip = { @@ -51,6 +49,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) for (i = 0; i < nr_irqs; i++) { unsigned int irq = table[i].irq; + table[i].addr = map_ipridx_to_addr(table[i].ipr_idx); + /* could the IPR index be mapped, if not we ignore this */ + if (table[i].addr == 0) + continue; disable_irq_nosync(irq); set_irq_chip_and_handler_name(irq, &ipr_irq_chip, handle_level_irq, "level"); @@ -60,99 +62,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) } EXPORT_SYMBOL(make_ipr_irq); -/* - * XXX: Move this garbage in to the drivers, and kill off the ridiculous CPU - * subtype checks. - */ -static struct ipr_data sys_ipr_map[] = { -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY }, - { TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY }, -#ifdef RTC_IRQ - { RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY }, -#endif -#ifdef SCI_ERI_IRQ - { SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, - { SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, - { SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, -#endif -#ifdef SCIF1_ERI_IRQ - { SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, -#endif -#ifdef SCIF2_ERI_IRQ - { SCIF2_ERI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, - { SCIF2_RXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, - { SCIF2_BRI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, - { SCIF2_TXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY }, -#endif -#ifdef SCIF3_ERI_IRQ - { SCIF3_ERI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, - { SCIF3_RXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, - { SCIF3_BRI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, - { SCIF3_TXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY }, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, -#endif -#ifdef SCIF_ERI_IRQ - { SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, - { SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, -#endif -#ifdef IRDA_ERI_IRQ - { IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, - { IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) - /* - * Initialize the Interrupt Controller (INTC) - * registers to their power on values - */ - - /* - * Enable external irq (INTC IRQ mode). - * You should set corresponding bits of PFC to "00" - * to enable these interrupts. - */ - { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY }, - { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, - { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, - { IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY }, - { IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY }, - { IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY }, -#endif -#endif -}; - -void __init init_IRQ(void) -{ - make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map)); - -#ifdef CONFIG_CPU_HAS_PINT_IRQ - init_IRQ_pint(); -#endif - -#ifdef CONFIG_CPU_HAS_INTC2_IRQ - init_IRQ_intc2(); -#endif - /* Perform the machine specific initialisation */ - if (sh_mv.mv_init_irq != NULL) - sh_mv.mv_init_irq(); - - irq_ctx_init(smp_processor_id()); -} - #if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 50812d57c1c1..bbcb06f18b04 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -2,6 +2,7 @@ * SH7750/SH7751 Setup * * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 Jamie Lenehan * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -10,6 +11,7 @@ #include #include #include +#include #include static struct plat_sci_port sci_platform_data[] = { @@ -46,3 +48,71 @@ static int __init sh7750_devices_setup(void) ARRAY_SIZE(sh7750_devices)); } __initcall(sh7750_devices_setup); + +static struct ipr_data sh7750_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 12, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 19, 0, 4, 2 }, /* TMU2 TIPCI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ + { 21, 0, 0, 2 }, /* RTC PRI (period) */ + { 22, 0, 0, 2 }, /* RTC CUI (carry) */ + { 23, 1, 4, 3 }, /* SCI ERI */ + { 24, 1, 4, 3 }, /* SCI RXI */ + { 25, 1, 4, 3 }, /* SCI TXI */ + { 40, 2, 4, 3 }, /* SCIF ERI */ + { 41, 2, 4, 3 }, /* SCIF RXI */ + { 42, 2, 4, 3 }, /* SCIF BRI */ + { 43, 2, 4, 3 }, /* SCIF TXI */ + { 34, 2, 8, 7 }, /* DMAC DMTE0 */ + { 35, 2, 8, 7 }, /* DMAC DMTE1 */ + { 36, 2, 8, 7 }, /* DMAC DMTE2 */ + { 37, 2, 8, 7 }, /* DMAC DMTE3 */ + { 28, 2, 8, 7 }, /* DMAC DMAE */ +}; + +static struct ipr_data sh7751_ipr_map[] = { + { 44, 2, 8, 7 }, /* DMAC DMTE4 */ + { 45, 2, 8, 7 }, /* DMAC DMTE5 */ + { 46, 2, 8, 7 }, /* DMAC DMTE6 */ + { 47, 2, 8, 7 }, /* DMAC DMTE7 */ + /* The following use INTC_INPRI00 for masking, which is a 32-bit + register, not a 16-bit register like the IPRx registers, so it + would need special support */ + /*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */ + /*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */ +}; + +static unsigned long ipr_offsets[] = { + 0xffd00004UL, /* 0: IPRA */ + 0xffd00008UL, /* 1: IPRB */ + 0xffd0000cUL, /* 2: IPRC */ + 0xffd00010UL, /* 3: IPRD */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + +#define INTC_ICR 0xffd00000UL +#define INTC_ICR_IRLM (1<<7) + +/* enable individual interrupt mode for external interupts */ +void ipr_irq_enable_irlm(void) +{ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); +} + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map)); +#ifdef CONFIG_CPU_SUBTYPE_SH7751 + make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map)); +#endif +} diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 46a19e07abd3..67be2b6e8cd1 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -112,7 +112,7 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_CPU_HAS_INTEVT - irq = (ctrl_inl(INTEVT) >> 5) - 16; + irq = evt2irq(ctrl_inl(INTEVT)); #else irq = r4; #endif @@ -261,3 +261,24 @@ asmlinkage void do_softirq(void) } EXPORT_SYMBOL(do_softirq); #endif + +void __init init_IRQ(void) +{ +#ifdef CONFIG_CPU_HAS_PINT_IRQ + init_IRQ_pint(); +#endif + +#ifdef CONFIG_CPU_HAS_INTC2_IRQ + init_IRQ_intc2(); +#endif + +#ifdef CONFIG_CPU_HAS_IPR_IRQ + init_IRQ_ipr(); +#endif + + /* Perform the machine specific initialisation */ + if (sh_mv.mv_init_irq) + sh_mv.mv_init_irq(); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 6cd6d0045d16..4e0362f50384 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -104,6 +104,7 @@ comment "SH-4 Processor Support" config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" select CPU_SH4 + select CPU_HAS_IPR_IRQ help Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. @@ -119,15 +120,18 @@ config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 select CPU_SUBTYPE_SH7750 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7751 bool "Support SH7751 processor" select CPU_SH4 + select CPU_HAS_IPR_IRQ help Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, or if you have a HD6417751R CPU. @@ -136,6 +140,7 @@ config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 select CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index f10cfc10227e..fd576088e47e 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -92,6 +92,12 @@ /* NR_IRQS. 1+2+3 */ #define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS) +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) + /* * Simple Mask Register Support */ @@ -103,18 +109,36 @@ extern unsigned short *irq_mask_register; */ void init_IRQ_pint(void); +/* + * The shift value is now the number of bits to shift, not the number of + * bits/4. This is to make it easier to read the value directly from the + * datasheets. The IPR address, addr, will be set from ipr_idx via the + * map_ipridx_to_addr function. + */ struct ipr_data { unsigned int irq; - unsigned int addr; /* Address of Interrupt Priority Register */ - int shift; /* Shifts of the 16-bit data */ + int ipr_idx; /* Index for the IPR registered */ + int shift; /* Number of bits to shift the data */ int priority; /* The priority */ + unsigned int addr; /* Address of Interrupt Priority Register */ }; +/* + * Given an IPR IDX, map the value to an IPR register address. + */ +unsigned int map_ipridx_to_addr(int idx); + +/* + * Enable individual interrupt mode for external IPR IRQs. + */ +void ipr_irq_enable_irlm(void); + /* * Function for "on chip support modules". */ -extern void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs); -extern void make_imask_irq(unsigned int irq); +void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs); +void make_imask_irq(unsigned int irq); +void init_IRQ_ipr(void); struct intc2_data { unsigned short irq; diff --git a/include/asm-sh/titan.h b/include/asm-sh/titan.h index 270a4f4bc8a9..03f3583c8918 100644 --- a/include/asm-sh/titan.h +++ b/include/asm-sh/titan.h @@ -1,9 +1,8 @@ /* * Platform defintions for Titan */ - -#ifndef _ASM_SH_TITAN_TITAN_H -#define _ASM_SH_TITAN_TITAN_H +#ifndef _ASM_SH_TITAN_H +#define _ASM_SH_TITAN_H #define __IO_PREFIX titan #include @@ -15,29 +14,4 @@ #define TITAN_IRQ_MPCIB 11 /* mPCI B */ #define TITAN_IRQ_USB 11 /* USB */ -/* - * The external interrupt lines, these take up ints 0 - 15 inclusive - * depending on the priority for the interrupt. In fact the priority - * is the interrupt :-) - */ -#define IRL0_IRQ 0 -#define IRL0_IPR_ADDR INTC_IPRD -#define IRL0_IPR_POS 3 -#define IRL0_PRIORITY 8 - -#define IRL1_IRQ 1 -#define IRL1_IPR_ADDR INTC_IPRD -#define IRL1_IPR_POS 2 -#define IRL1_PRIORITY 8 - -#define IRL2_IRQ 2 -#define IRL2_IPR_ADDR INTC_IPRD -#define IRL2_IPR_POS 1 -#define IRL2_PRIORITY 8 - -#define IRL3_IRQ 3 -#define IRL3_IPR_ADDR INTC_IPRD -#define IRL3_IPR_POS 0 -#define IRL3_PRIORITY 8 - -#endif +#endif /* __ASM_SH_TITAN_H */ -- cgit v1.2.3