From 1b208bab34dc3f4ef8f408105017d4a7b72b2a2f Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 17 Sep 2020 08:59:48 +0200 Subject: arm64: dts: meson-axg: add USB nodes This adds the USB Glue node, with the USB2 & USB3 controllers along the single USB2 PHY node. Signed-off-by: Neil Armstrong Reviewed-by: Kevin Hilman Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 ++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b9efc8469265..fae48efae83e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,6 +171,46 @@ #size-cells = <2>; ranges; + usb: usb@ffe09080 { + compatible = "amlogic,meson-axg-usb-ctrl"; + reg = <0x0 0xffe09080 0x0 0x20>; + interrupts = ; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; + resets = <&reset RESET_USB_OTG>; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = ; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = ; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -1734,6 +1774,16 @@ clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; + + usb2_phy1: phy@9020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x9020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + }; }; sram: sram@fffc0000 { -- cgit v1.2.3 From f450d2c219f6a6b79880c97bf910c3c72725eb70 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 17 Sep 2020 08:59:49 +0200 Subject: arm64: dts: meson-axg-s400: enable USB OTG This enables USB OTG on the S400 board. Signed-off-by: Neil Armstrong Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index cb1360ae1211..7740f97c240f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -584,3 +584,9 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usb_pwr>; +}; -- cgit v1.2.3 From a1afbbb0285797e01313779c71287d936d069245 Mon Sep 17 00:00:00 2001 From: Scott K Logan Date: Fri, 25 Sep 2020 01:43:53 -0700 Subject: arm64: dts: meson: add missing g12 rng clock This adds the missing perpheral clock for the RNG for Amlogic G12. As stated in amlogic,meson-rng.yaml, this isn't always necessary for the RNG to function, but is better to have in case the clock is disabled for some reason prior to loading. Signed-off-by: Scott K Logan Suggested-by: Neil Armstrong Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/520a1a8ec7a958b3d918d89563ec7e93a4100a45.camel@cottsay.net --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 1e83ec5b8c91..81f490e404ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -282,6 +282,8 @@ hwrng: rng@218 { compatible = "amlogic,meson-rng"; reg = <0x0 0x218 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; }; }; -- cgit v1.2.3 From 1fdc97ae450ede2b4911d6737a57e6fca63b5f4a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Fri, 25 Sep 2020 23:17:43 +0200 Subject: arm64: dts: amlogic: meson-g12: use the G12A specific dwmac compatible We have a dedicated "amlogic,meson-g12a-dwmac" compatible string for the Ethernet controller since commit 3efdb92426bf4 ("dt-bindings: net: dwmac-meson: Add a compatible string for G12A onwards"). Using the AXG compatible string worked fine so far because the dwmac-meson8b driver doesn't handle the newly introduced register bits for G12A. However, once that changes the driver must be probed with the correct compatible string to manage these new register bits. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200925211743.537496-1-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 81f490e404ca..c95ebe615176 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -209,7 +209,7 @@ }; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", + compatible = "amlogic,meson-g12a-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000>, -- cgit v1.2.3 From f3362f0c18174a1f334a419ab7d567a36bd1b3f3 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Tue, 20 Oct 2020 14:01:41 +0200 Subject: arm64: dts: amlogic: add missing ethernet reset ID Add reset external reset of the ethernet mac controller Signed-off-by: Anand Moon Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20201020120141.298240-1-jbrunet@baylibre.com --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 ++ arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 2 ++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 3 +++ 3 files changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index fae48efae83e..724ee179b316 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -227,6 +227,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index c95ebe615176..8514fe6a275a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -224,6 +224,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 0edd137151f8..726b91d3a905 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,6 +13,7 @@ #include #include #include +#include #include / { @@ -575,6 +576,8 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; -- cgit v1.2.3 From 930eae9d3dd474ca1d5de63ea05d73075405cf6a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 15 Aug 2020 20:19:57 +0200 Subject: ARM: dts: meson8: remove two invalid interrupt lines from the GPU node The 3.10 vendor kernel defines the following GPU 20 interrupt lines: #define INT_MALI_GP AM_IRQ(160) #define INT_MALI_GP_MMU AM_IRQ(161) #define INT_MALI_PP AM_IRQ(162) #define INT_MALI_PMU AM_IRQ(163) #define INT_MALI_PP0 AM_IRQ(164) #define INT_MALI_PP0_MMU AM_IRQ(165) #define INT_MALI_PP1 AM_IRQ(166) #define INT_MALI_PP1_MMU AM_IRQ(167) #define INT_MALI_PP2 AM_IRQ(168) #define INT_MALI_PP2_MMU AM_IRQ(169) #define INT_MALI_PP3 AM_IRQ(170) #define INT_MALI_PP3_MMU AM_IRQ(171) #define INT_MALI_PP4 AM_IRQ(172) #define INT_MALI_PP4_MMU AM_IRQ(173) #define INT_MALI_PP5 AM_IRQ(174) #define INT_MALI_PP5_MMU AM_IRQ(175) #define INT_MALI_PP6 AM_IRQ(176) #define INT_MALI_PP6_MMU AM_IRQ(177) #define INT_MALI_PP7 AM_IRQ(178) #define INT_MALI_PP7_MMU AM_IRQ(179) However, the driver from the 3.10 vendor kernel does not use the following four interrupt lines: - INT_MALI_PP3 - INT_MALI_PP3_MMU - INT_MALI_PP7 - INT_MALI_PP7_MMU Drop the "pp3" and "ppmmu3" interrupt lines. This is also important because there is no matching entry in interrupt-names for it (meaning the "pp2" interrupt is actually assigned to the "pp3" interrupt line). Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Thomas Graichen Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Tested-by: thomas graichen Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8.dtsi | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index eedb92526968..a4ab8b96d0eb 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -239,8 +239,6 @@ , , , - , - , , , , -- cgit v1.2.3 From f7d933388f11f66e5af9e5663a17f26523fddd07 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 23 Oct 2020 11:41:39 +0200 Subject: arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm On the odroid N2 plus, cpufreq is not available due to an error on the cpu regulators. vddcpu a and b get the same PWM. The one provided to vddcpu A is incorrect. Because vddcpu B PWM is busy the regulator cannot register: > pwm-regulator regulator-vddcpu-b: Failed to get PWM: -16 Like on the odroid n2, use PWM A out of GPIOE_2 for vddcpu A to fix the problem Fixes: 98d24896ee11 ("arm64: dts: meson: add support for the ODROID-N2+") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20201023094139.809379-1-jbrunet@baylibre.com --- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts index 5de2815ba99d..ce1198ad34e4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts @@ -19,7 +19,7 @@ regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; - pwms = <&pwm_AO_cd 1 1500 0>; + pwms = <&pwm_ab 0 1500 0>; }; &vddcpu_b { -- cgit v1.2.3