From 7db1aa6ff9811b4ba24814d8eb40b21555ca0492 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Mon, 3 Aug 2020 17:30:22 +0300 Subject: arm64: dts: allwinner: replace numerical constant with CCU_CLKX Signed-off-by: Alexander Kochetkov Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200803143022.25909-1-al.kochet@gmail.com --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 8dfbcd144072..73e9b7345257 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -51,7 +51,7 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -62,7 +62,7 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -73,7 +73,7 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; @@ -84,7 +84,7 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; - clocks = <&ccu 21>; + clocks = <&ccu CLK_CPUX>; clock-names = "cpu"; #cooling-cells = <2>; }; -- cgit v1.2.3 From a371b1bdf2b85840de7e3267eaedef9a585541c0 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 8 Aug 2020 21:18:22 -0500 Subject: arm64: dts: allwinner: Mark timer as stopped in suspend When possible, system firmware on 64-bit Allwinner platforms disables OSC24M during system suspend. Since this oscillator is the clock source for the ARM architectural timer, this causes the timer to stop counting. Therefore, the ARM architectural timer must not be marked as NONSTOP on these platforms, or the time will be wrong after system resume. Adding the arm,no-tick-in-suspend property forces the kernel to ignore the ARM architectural timer when calculating sleeptime; it falls back to reading the RTC. Note that this only affects deep suspend, not s2idle. Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200809021822.5285-1-samuel@sholland.org --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 1 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 1 + 3 files changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 73e9b7345257..cf379e38b3a0 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -157,6 +157,7 @@ timer { compatible = "arm,armv8-timer"; allwinner,erratum-unknown1; + arm,no-tick-in-suspend; interrupts = , , , Date: Mon, 24 Aug 2020 17:04:34 +0200 Subject: ARM: dts: sun8i: r40: Add Mali node R40 has Mali400 GP2 GPU. Add a node for it. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200824150434.951693-3-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index b782041e0e04..b82031b19893 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -743,6 +743,28 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun8i-r40-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pmu"; + clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_BUS_GPU>; + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; -- cgit v1.2.3 From 64faa1053197bd69204bdebe815aeb2447991481 Mon Sep 17 00:00:00 2001 From: Stefan Monnier Date: Fri, 21 Aug 2020 13:18:33 -0400 Subject: ARM: dts: sun4i: Enable HDMI support on the Mele A1000 Enable the display pipeline and HDMI output. Signed-off-by: Stefan Monnier Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200821171833.28177-1-monnier@iro.umontreal.ca --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 8692b11a83c3..af8ab736fd3c 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -60,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -133,6 +144,20 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; -- cgit v1.2.3 From 0dea1794f3b4bca45affd8ae7eb0ac33fa1c0599 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Fri, 24 Jul 2020 15:18:24 +0800 Subject: arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds the basical DTSI file of it, including the clock, i2c, pins, sid, ths, nmi, and UART support. Signed-off-by: Yangtao Li Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/815a458de74b79eb649972de786e647be3846424.1595572867.git.frank@allwinnertech.com --- arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 +++++++++++++++++++++++++ 1 file changed, 364 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi new file mode 100644 index 000000000000..cc321c04f121 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Yangtao Li + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + dcxo24M: dcxo24M-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "dcxo24M"; + #clock-cells = <0>; + }; + + iosc: internal-osc-clk { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + #clock-cells = <0>; + }; + + osc32k: osc32k-clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x3fffffff>; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-a100-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, <0x03022000 0x2000>, + <0x03024000 0x2000>, <0x03026000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + efuse@3006000 { + compatible = "allwinner,sun50i-a100-sid", + "allwinner,sun50i-a64-sid"; + reg = <0x03006000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: calib@14 { + reg = <0x14 8>; + }; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-a100-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = , + , + , + , + , + , + ; + clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + uart0_pb_pins: uart0-pb-pins { + pins = "PB9", "PB10"; + function = "uart0"; + }; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-a100-ths"; + reg = <0x05070400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-a100-r-ccu"; + reg = <0x07010000 0x300>; + clocks = <&dcxo24M>, <&osc32k>, <&iosc>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_intc: interrupt-controller@7010320 { + compatible = "allwinner,sun50i-a100-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x07010320 0xc>; + interrupts = ; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-a100-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c0_pins: r-i2c0-pins { + pins = "PL0", "PL1"; + function = "s_i2c0"; + }; + + r_i2c1_pins: r-i2c1-pins { + pins = "PL8", "PL9"; + function = "s_i2c1"; + }; + }; + + r_uart: serial@7080000 { + compatible = "snps,dw-apb-uart"; + reg = <0x07080000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&r_ccu CLK_R_APB2_UART>; + resets = <&r_ccu RST_R_APB2_UART>; + status = "disabled"; + }; + + r_i2c0: i2c@7081400 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB2_I2C0>; + resets = <&r_ccu RST_R_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_i2c1: i2c@7081800 { + compatible = "allwinner,sun50i-a100-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081800 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB2_I2C1>; + resets = <&r_ccu RST_R_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + thermal-zones { + cpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + ddr-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + + gpu-thermal-zone { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; +}; -- cgit v1.2.3 From 95c83906380e77f5081b231bba625bdebc57d592 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Fri, 24 Jul 2020 15:21:05 +0800 Subject: arm64: allwinner: A100: add support for Allwinner Perf1 board MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A100 perf1 is an Allwinner A100-based SBC, with the following features: - 1GiB DDR3 DRAM - AXP803 PMIC - 2 USB 2.0 ports - MicroSD slot and on-board eMMC module - on-board Nand flash - ยทยทยท Adds initial support for it, including UART and PMU. Signed-off-by: Yangtao Li Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/30f4a3fc6ac84d05094e2c3b89d1dddc8ff6b7fc.1595572867.git.frank@allwinnertech.com --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-a100-allwinner-perf1.dts | 180 +++++++++++++++++++++ 2 files changed, 181 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 916d10d5b87c..211d1e9d4701 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts new file mode 100644 index 000000000000..d34c2bb1079f --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Yangtao Li + */ + +/dts-v1/; + +#include "sun50i-a100.dtsi" + +/{ + model = "Allwinner A100 Perf1"; + compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pio { + vcc-pb-supply = <®_dcdc1>; + vcc-pc-supply = <®_eldo1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_dldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; + vcc-ph-supply = <®_dcdc1>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo3>; + */ +}; + +&r_i2c0 { + status = "okay"; + + axp803: pmic@34 { + compatible = "x-powers,axp803"; + reg = <0x34>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dram-1"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-pl"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-usb-pd-emmc-nand-card"; +}; + +®_dcdc2 { + regulator-always-on; + /* + * FIXME: update min and max before support dvfs. + */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-name = "vdd-sys-usb-dram"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram-2"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pg-dcxo-wifi"; +}; + +®_dldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe-csi"; +}; + +®_dldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ldo-avdd-csi"; +}; + +®_dldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avcc-csi"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pc-lvds-csi-efuse-emmc-nand"; +}; + +®_eldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-name = "dvdd-csi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-mipi-lcd"; +}; + +®_fldo1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus-usb"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; -- cgit v1.2.3 From 5822bfed6472340f882b43d5c2f2629091191c9d Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 25 Aug 2020 12:00:30 +0200 Subject: ARM: dts: sun8i: r40: Add DMA node Allwinner R40 SoC has DMA with 16 channels and 31 request sources. Add a node for it. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200825100030.1145356-3-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index b82031b19893..d481fe7989b8 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -198,6 +198,18 @@ interrupts = ; }; + dma: dma-controller@1c02000 { + compatible = "allwinner,sun8i-r40-dma", + "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <16>; + dma-requests = <31>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + spi0: spi@1c05000 { compatible = "allwinner,sun8i-r40-spi", "allwinner,sun8i-h3-spi"; -- cgit v1.2.3 From 166405e1f89acf7b24d95b90dbd1f78ec1ab3ec6 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 25 Aug 2020 19:13:57 +0200 Subject: ARM: dts: sun8i: r40: Add IR nodes Allwinner R40 has two IR cores, add nodes for them. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200825171358.1286902-3-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index d481fe7989b8..dff9a3dc1fba 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -513,6 +513,16 @@ function = "i2c4"; }; + ir0_pins: ir0-pins { + pins = "PB4"; + function = "ir0"; + }; + + ir1_pins: ir1-pins { + pins = "PB23"; + function = "ir1"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -591,6 +601,32 @@ clocks = <&osc24M>; }; + ir0: ir@1c21800 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21800 0x400>; + pinctrl-0 = <&ir0_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR0>; + status = "disabled"; + }; + + ir1: ir@1c21c00 { + compatible = "allwinner,sun8i-r40-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01c21c00 0x400>; + pinctrl-0 = <&ir1_pins>; + pinctrl-names = "default"; + clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>; + clock-names = "apb", "ir"; + interrupts = ; + resets = <&ccu RST_BUS_IR1>; + status = "disabled"; + }; + ths: thermal-sensor@1c24c00 { compatible = "allwinner,sun8i-r40-ths"; reg = <0x01c24c00 0x100>; -- cgit v1.2.3 From 44406428f5764d7a71be3bafd642c8e02cdd5468 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 25 Aug 2020 19:13:58 +0200 Subject: ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR BananaPi M2 Ultra has IR receiver connected to IR0. Enable it. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200825171358.1286902-4-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 42d62d1ba1dc..ca6088c87855 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -164,6 +164,10 @@ #include "axp22x.dtsi" +&ir0 { + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; -- cgit v1.2.3 From 3566b0869179779d3abc4b605dcc9d2121d67672 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 25 Aug 2020 19:35:20 +0200 Subject: ARM: dts: sun8i: r40: Add node for system controller Allwinner R40 has system controller and SRAM C1 region similar to that in A10. Add nodes for them. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200825173523.1289379-3-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index dff9a3dc1fba..0c7526365896 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -190,6 +190,29 @@ }; }; + syscon: system-control@1c00000 { + compatible = "allwinner,sun8i-r40-system-control", + "allwinner,sun4i-a10-system-control"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun8i-r40-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; -- cgit v1.2.3 From a770df83d85eca56c7e842e9ecbdc5fe91701958 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Tue, 25 Aug 2020 19:35:23 +0200 Subject: ARM: dts: sun8i: r40: Add video engine node Allwinner R40 SoC has a video engine. Add a node for it. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200825173523.1289379-6-jernej.skrabec@siol.net --- arch/arm/boot/dts/sun8i-r40.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 0c7526365896..7907569e7b5c 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,6 +273,17 @@ status = "disabled"; }; + video-codec@1c0e000 { + compatible = "allwinner,sun8i-r40-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = ; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun8i-r40-mmc", "allwinner,sun50i-a64-mmc"; -- cgit v1.2.3 From 44967e8182e6265158d769f56993870aa08e800d Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 25 Jul 2020 20:25:55 -0500 Subject: ARM: dts: sun8i: a33: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names. Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200726012557.38282-6-samuel@sholland.org --- arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 4 ++-- arch/arm/boot/dts/sun8i-a33.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 3d78169cdeed..a1953b2872d0 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -194,8 +194,8 @@ "Headphone", "Headphone Jack"; /* Board level routing. First 2 routes copied from SoC level */ simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "HP", "HPCOM", "Headphone Jack", "HP", "MIC1", "Microphone Jack", diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index cfd3858afb3e..c458f5fb124f 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -189,8 +189,8 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right"; + "Left DAC", "DACL", + "Right DAC", "DACR"; status = "disabled"; simple-audio-card,cpu { -- cgit v1.2.3 From 631e6a353060981675cc15d71417e3379fb414e2 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 25 Jul 2020 20:25:56 -0500 Subject: arm64: dts: allwinner: a64: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names. Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org --- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 8 ++++---- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 8 ++++---- 9 files changed, 36 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 883f217efb81..3ea5182ca489 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -331,10 +331,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index fde9c7a99b17..d894ec5fa8a1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -330,10 +330,10 @@ "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 2165f238af13..329cf276561e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -261,11 +261,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 64b1c54f87c0..896f34fd9fc3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -374,15 +374,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 25150aba749d..5780713b0dba 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -392,10 +392,10 @@ "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone", "MBIAS", "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts index dc4ab6b434f9..3ab0f0347bc9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts @@ -421,15 +421,15 @@ "Headphone", "Headphone Jack", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Internal Microphone Left", "MBIAS", "MIC1", "Internal Microphone Left", "Internal Microphone Right", "HBIAS", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 2f6ea9f3f6a2..9ebb9e07fae3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -159,11 +159,11 @@ simple-audio-card,widgets = "Microphone", "Microphone Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", + "Left DAC", "DACL", + "Right DAC", "DACR", "Headphone Jack", "HP", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "MIC2", "Microphone Jack"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index f5df5f705b72..a1864a89fb89 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -340,10 +340,10 @@ "Microphone", "Internal Microphone", "Speaker", "Internal Speaker"; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC", + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC", "Headphone Jack", "HP", "Speaker Amp INL", "LINEOUT", "Speaker Amp INR", "LINEOUT", diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index cf379e38b3a0..88758af18369 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -139,10 +139,10 @@ simple-audio-card,mclk-fs = <128>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "AIF1 Slot 0 Left", - "Right DAC", "AIF1 Slot 0 Right", - "AIF1 Slot 0 Left ADC", "Left ADC", - "AIF1 Slot 0 Right ADC", "Right ADC"; + "Left DAC", "DACL", + "Right DAC", "DACR", + "ADCL", "Left ADC", + "ADCR", "Right ADC"; status = "disabled"; cpudai: simple-audio-card,cpu { -- cgit v1.2.3 From db9c6ad2e88603f5c58d53894ffefcabd55ce3d2 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Sat, 25 Jul 2020 20:25:57 -0500 Subject: arm64: dts: allwinner: a64: Update the audio codec compatible The audio codec in the A64 has some differences from the A33 codec, so it needs its own compatible. Since the two codecs are similar, the A33 codec compatible is kept as a fallback. Using the correct compatible fixes a channel inversion issue and cleans up some DAPM widgets that are no longer used. Signed-off-by: Samuel Holland Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200726012557.38282-8-samuel@sholland.org --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 88758af18369..dc238814013c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -861,7 +861,8 @@ codec: codec@1c22e00 { #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-a33-codec"; + compatible = "allwinner,sun50i-a64-codec", + "allwinner,sun8i-a33-codec"; reg = <0x01c22e00 0x600>; interrupts = ; clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; -- cgit v1.2.3 From 96820e359e25c7a61c4c8b994745aaa9d9db6a5e Mon Sep 17 00:00:00 2001 From: Martin Cerveny Date: Mon, 7 Sep 2020 18:24:58 +0200 Subject: ARM: dts: sun8i: v3s: Enable crypto engine V3s contains crypto engine that is compatible with A33. Add device tree node. Signed-off-by: Martin Cerveny Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200907162458.23730-3-m.cerveny@computer.org --- arch/arm/boot/dts/sun8i-v3s.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index e5312869c0d2..6eb9c39aa93f 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -234,6 +234,17 @@ #size-cells = <0>; }; + crypto@1c15000 { + compatible = "allwinner,sun8i-v3s-crypto", + "allwinner,sun8i-a33-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_CE>; + reset-names = "ahb"; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; -- cgit v1.2.3