From c7f06284a6427475e3df742215535ec3f6cd9662 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Sep 2024 10:39:15 +0300 Subject: ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate() The psc->div[] array has psc->num_div elements. These values come from when we call clk_hw_register_div(). It's adc_divisors and ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >= instead of > to prevent an out of bounds read. Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK") Signed-off-by: Dan Carpenter Acked-by: Alexander Sverdlin Reviewed-by: Nikita Shubin Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/1caf01ad4c0a8069535813c26c7f0b8ea011155e.camel@linaro.org Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 85a496ddc619..e9f72a529b50 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -359,7 +359,7 @@ static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, u32 val = __raw_readl(psc->reg); u8 index = (val & psc->mask) >> psc->shift; - if (index > psc->num_div) + if (index >= psc->num_div) return 0; return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); -- cgit v1.2.3 From cbe8e464eb29057f0f368e493277bdaa6dc5d656 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:26 +0300 Subject: gpio: ep93xx: split device in multiple Prepare ep93xx SOC gpio to convert into device tree driver: - dropped banks and legacy defines - split AB IRQ and make it shared We are relying on IRQ number information A, B ports have single shared IRQ, while F port have dedicated IRQ for each line. Also we had to split single ep93xx platform_device into multiple, one for each port, without this we can't do a full working transition from legacy platform code into device tree capable. All GPIO_LOOKUP were change to match new chip namings. Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Reviewed-by: Krzysztof Kozlowski Reviewed-by: Guenter Roeck Acked-by: Bartosz Golaszewski Acked-by: Miquel Raynal Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/core.c | 121 +++++++++++-- arch/arm/mach-ep93xx/edb93xx.c | 2 +- arch/arm/mach-ep93xx/ts72xx.c | 4 +- arch/arm/mach-ep93xx/vision_ep9307.c | 10 +- drivers/gpio/gpio-ep93xx.c | 325 +++++++++++++---------------------- 5 files changed, 235 insertions(+), 227 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8b1ec60a9a46..03bce5e9d1f1 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "hardware.h" #include @@ -139,9 +140,80 @@ EXPORT_SYMBOL_GPL(ep93xx_chip_revision); /************************************************************************* * EP93xx GPIO *************************************************************************/ -static struct resource ep93xx_gpio_resource[] = { - DEFINE_RES_MEM(EP93XX_GPIO_PHYS_BASE, 0xcc), +/* port A */ +static struct resource ep93xx_a_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"), DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), +}; + +static struct platform_device ep93xx_a_gpio = { + .name = "gpio-ep93xx", + .id = 0, + .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources), + .resource = ep93xx_a_gpio_resources, +}; + +/* port B */ +static struct resource ep93xx_b_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"), + DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), +}; + +static struct platform_device ep93xx_b_gpio = { + .name = "gpio-ep93xx", + .id = 1, + .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources), + .resource = ep93xx_b_gpio_resources, +}; + +/* port C */ +static struct resource ep93xx_c_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"), +}; + +static struct platform_device ep93xx_c_gpio = { + .name = "gpio-ep93xx", + .id = 2, + .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources), + .resource = ep93xx_c_gpio_resources, +}; + +/* port D */ +static struct resource ep93xx_d_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"), +}; + +static struct platform_device ep93xx_d_gpio = { + .name = "gpio-ep93xx", + .id = 3, + .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources), + .resource = ep93xx_d_gpio_resources, +}; + +/* port E */ +static struct resource ep93xx_e_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"), +}; + +static struct platform_device ep93xx_e_gpio = { + .name = "gpio-ep93xx", + .id = 4, + .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources), + .resource = ep93xx_e_gpio_resources, +}; + +/* port F */ +static struct resource ep93xx_f_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"), DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), @@ -152,11 +224,34 @@ static struct resource ep93xx_gpio_resource[] = { DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), }; -static struct platform_device ep93xx_gpio_device = { - .name = "gpio-ep93xx", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), - .resource = ep93xx_gpio_resource, +static struct platform_device ep93xx_f_gpio = { + .name = "gpio-ep93xx", + .id = 5, + .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources), + .resource = ep93xx_f_gpio_resources, +}; + +/* port G */ +static struct resource ep93xx_g_gpio_resources[] = { + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"), + DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"), +}; + +static struct platform_device ep93xx_g_gpio = { + .name = "gpio-ep93xx", + .id = 6, + .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources), + .resource = ep93xx_g_gpio_resources, +}; + +static struct platform_device *ep93xx_gpio_device[] __initdata = { + &ep93xx_a_gpio, + &ep93xx_b_gpio, + &ep93xx_c_gpio, + &ep93xx_d_gpio, + &ep93xx_e_gpio, + &ep93xx_f_gpio, + &ep93xx_g_gpio, }; /************************************************************************* @@ -335,9 +430,9 @@ static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { .dev_id = "i2c-gpio.0", .table = { /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("G", 1, NULL, 0, + GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("G", 0, NULL, 1, + GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), { } }, @@ -441,8 +536,8 @@ static struct gpiod_lookup_table ep93xx_leds_gpio_table = { .dev_id = "leds-gpio", .table = { /* Use local offsets on gpiochip/port "E" */ - GPIO_LOOKUP_IDX("E", 0, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("E", 1, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH), { } }, }; @@ -975,6 +1070,7 @@ static struct device __init *ep93xx_init_soc(void) struct device __init *ep93xx_init_devices(void) { struct device *parent; + unsigned int i; /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); @@ -989,7 +1085,8 @@ struct device __init *ep93xx_init_devices(void) parent = ep93xx_init_soc(); /* Get the GPIO working early, other devices need it */ - platform_device_register(&ep93xx_gpio_device); + for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++) + platform_device_register(ep93xx_gpio_device[i]); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index dbdb822a0100..356b0460c7ed 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -105,7 +105,7 @@ static struct spi_board_info edb93xx_spi_board_info[] __initdata = { static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { .dev_id = "spi0", .table = { - GPIO_LOOKUP("A", 6, "cs", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index d3de7283ecb3..0bbdf587c685 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -268,7 +268,7 @@ static struct spi_board_info bk3_spi_board_info[] __initdata = { static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { .dev_id = "spi0", .table = { - GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW), { }, }, }; @@ -318,7 +318,7 @@ static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { .dev_id = "spi0", .table = { /* DIO_17 */ - GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 9471938df64c..b3087b8eed3f 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -206,9 +206,9 @@ static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ .table = { /* Card detect */ - GPIO_LOOKUP_IDX("B", 7, NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW), /* Write protect */ - GPIO_LOOKUP_IDX("F", 0, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH), { }, }, }; @@ -253,9 +253,9 @@ static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { static struct gpiod_lookup_table vision_spi_cs_gpio_table = { .dev_id = "spi0", .table = { - GPIO_LOOKUP_IDX("A", 6, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("A", 7, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("G", 2, "cs", 2, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW), { }, }, }; diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c index 6cedf46efec6..a55f635585f4 100644 --- a/drivers/gpio/gpio-ep93xx.c +++ b/drivers/gpio/gpio-ep93xx.c @@ -18,30 +18,10 @@ #include #include #include - -#define EP93XX_GPIO_F_INT_STATUS 0x5c -#define EP93XX_GPIO_A_INT_STATUS 0xa0 -#define EP93XX_GPIO_B_INT_STATUS 0xbc - -/* Maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX 63 - -/* Number of GPIO chips in EP93XX */ -#define EP93XX_GPIO_CHIP_NUM 8 - -/* Maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ 23 - -#define EP93XX_GPIO_A_IRQ_BASE 64 -#define EP93XX_GPIO_B_IRQ_BASE 72 -/* - * Static mapping of GPIO bank F IRQS: - * F0..F7 (16..24) to irq 80..87. - */ -#define EP93XX_GPIO_F_IRQ_BASE 80 +#include struct ep93xx_gpio_irq_chip { - u8 irq_offset; + void __iomem *base; u8 int_unmasked; u8 int_enabled; u8 int_type1; @@ -50,15 +30,11 @@ struct ep93xx_gpio_irq_chip { }; struct ep93xx_gpio_chip { + void __iomem *base; struct gpio_chip gc; struct ep93xx_gpio_irq_chip *eic; }; -struct ep93xx_gpio { - void __iomem *base; - struct ep93xx_gpio_chip gc[EP93XX_GPIO_CHIP_NUM]; -}; - #define to_ep93xx_gpio_chip(x) container_of(x, struct ep93xx_gpio_chip, gc) static struct ep93xx_gpio_irq_chip *to_ep93xx_gpio_irq_chip(struct gpio_chip *gc) @@ -79,25 +55,23 @@ static struct ep93xx_gpio_irq_chip *to_ep93xx_gpio_irq_chip(struct gpio_chip *gc #define EP93XX_INT_RAW_STATUS_OFFSET 0x14 #define EP93XX_INT_DEBOUNCE_OFFSET 0x18 -static void ep93xx_gpio_update_int_params(struct ep93xx_gpio *epg, - struct ep93xx_gpio_irq_chip *eic) +static void ep93xx_gpio_update_int_params(struct ep93xx_gpio_irq_chip *eic) { - writeb_relaxed(0, epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET); + writeb_relaxed(0, eic->base + EP93XX_INT_EN_OFFSET); writeb_relaxed(eic->int_type2, - epg->base + eic->irq_offset + EP93XX_INT_TYPE2_OFFSET); + eic->base + EP93XX_INT_TYPE2_OFFSET); writeb_relaxed(eic->int_type1, - epg->base + eic->irq_offset + EP93XX_INT_TYPE1_OFFSET); + eic->base + EP93XX_INT_TYPE1_OFFSET); writeb_relaxed(eic->int_unmasked & eic->int_enabled, - epg->base + eic->irq_offset + EP93XX_INT_EN_OFFSET); + eic->base + EP93XX_INT_EN_OFFSET); } static void ep93xx_gpio_int_debounce(struct gpio_chip *gc, unsigned int offset, bool enable) { - struct ep93xx_gpio *epg = gpiochip_get_data(gc); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); int port_mask = BIT(offset); @@ -106,53 +80,43 @@ static void ep93xx_gpio_int_debounce(struct gpio_chip *gc, else eic->int_debounce &= ~port_mask; - writeb(eic->int_debounce, - epg->base + eic->irq_offset + EP93XX_INT_DEBOUNCE_OFFSET); + writeb(eic->int_debounce, eic->base + EP93XX_INT_DEBOUNCE_OFFSET); } -static void ep93xx_gpio_ab_irq_handler(struct irq_desc *desc) +static u32 ep93xx_gpio_ab_irq_handler(struct gpio_chip *gc) { - struct gpio_chip *gc = irq_desc_get_handler_data(desc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); - struct irq_chip *irqchip = irq_desc_get_chip(desc); + struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); unsigned long stat; int offset; - chained_irq_enter(irqchip, desc); - - /* - * Dispatch the IRQs to the irqdomain of each A and B - * gpiochip irqdomains depending on what has fired. - * The tricky part is that the IRQ line is shared - * between bank A and B and each has their own gpiochip. - */ - stat = readb(epg->base + EP93XX_GPIO_A_INT_STATUS); + stat = readb(eic->base + EP93XX_INT_STATUS_OFFSET); for_each_set_bit(offset, &stat, 8) - generic_handle_domain_irq(epg->gc[0].gc.irq.domain, - offset); + generic_handle_domain_irq(gc->irq.domain, offset); - stat = readb(epg->base + EP93XX_GPIO_B_INT_STATUS); - for_each_set_bit(offset, &stat, 8) - generic_handle_domain_irq(epg->gc[1].gc.irq.domain, - offset); + return stat; +} - chained_irq_exit(irqchip, desc); +static irqreturn_t ep93xx_ab_irq_handler(int irq, void *dev_id) +{ + return IRQ_RETVAL(ep93xx_gpio_ab_irq_handler(dev_id)); } static void ep93xx_gpio_f_irq_handler(struct irq_desc *desc) { - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> EP93XX_GPIO_LINE_F{0..7} - */ struct irq_chip *irqchip = irq_desc_get_chip(desc); - unsigned int irq = irq_desc_get_irq(desc); - int port_f_idx = (irq & 7) ^ 4; /* {20..23,48..51} -> {0..7} */ - int gpio_irq = EP93XX_GPIO_F_IRQ_BASE + port_f_idx; + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + struct gpio_irq_chip *gic = &gc->irq; + unsigned int parent = irq_desc_get_irq(desc); + unsigned int i; chained_irq_enter(irqchip, desc); - generic_handle_irq(gpio_irq); + for (i = 0; i < gic->num_parents; i++) + if (gic->parents[i] == parent) + break; + + if (i < gic->num_parents) + generic_handle_domain_irq(gc->irq.domain, i); + chained_irq_exit(irqchip, desc); } @@ -160,31 +124,29 @@ static void ep93xx_gpio_irq_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); - int port_mask = BIT(d->irq & 7); + int port_mask = BIT(irqd_to_hwirq(d)); if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { eic->int_type2 ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(epg, eic); + ep93xx_gpio_update_int_params(eic); } - writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET); + writeb(port_mask, eic->base + EP93XX_INT_EOI_OFFSET); } static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); - int port_mask = BIT(d->irq & 7); + int port_mask = BIT(irqd_to_hwirq(d)); if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) eic->int_type2 ^= port_mask; /* switch edge direction */ eic->int_unmasked &= ~port_mask; - ep93xx_gpio_update_int_params(epg, eic); + ep93xx_gpio_update_int_params(eic); - writeb(port_mask, epg->base + eic->irq_offset + EP93XX_INT_EOI_OFFSET); + writeb(port_mask, eic->base + EP93XX_INT_EOI_OFFSET); gpiochip_disable_irq(gc, irqd_to_hwirq(d)); } @@ -192,10 +154,9 @@ static void ep93xx_gpio_irq_mask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); - eic->int_unmasked &= ~BIT(d->irq & 7); - ep93xx_gpio_update_int_params(epg, eic); + eic->int_unmasked &= ~BIT(irqd_to_hwirq(d)); + ep93xx_gpio_update_int_params(eic); gpiochip_disable_irq(gc, irqd_to_hwirq(d)); } @@ -203,11 +164,10 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); gpiochip_enable_irq(gc, irqd_to_hwirq(d)); - eic->int_unmasked |= BIT(d->irq & 7); - ep93xx_gpio_update_int_params(epg, eic); + eic->int_unmasked |= BIT(irqd_to_hwirq(d)); + ep93xx_gpio_update_int_params(eic); } /* @@ -219,8 +179,7 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct ep93xx_gpio_irq_chip *eic = to_ep93xx_gpio_irq_chip(gc); - struct ep93xx_gpio *epg = gpiochip_get_data(gc); - int offset = d->irq & 7; + irq_hw_number_t offset = irqd_to_hwirq(d); int port_mask = BIT(offset); irq_flow_handler_t handler; @@ -264,51 +223,11 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) eic->int_enabled |= port_mask; - ep93xx_gpio_update_int_params(epg, eic); + ep93xx_gpio_update_int_params(eic); return 0; } -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_bank { - const char *label; - int data; - int dir; - int irq; - int base; - bool has_irq; - bool has_hierarchical_irq; - unsigned int irq_base; -}; - -#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \ - { \ - .label = _label, \ - .data = _data, \ - .dir = _dir, \ - .irq = _irq, \ - .base = _base, \ - .has_irq = _has_irq, \ - .has_hierarchical_irq = _has_hier, \ - .irq_base = _irq_base, \ - } - -static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = { - /* Bank A has 8 IRQs */ - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, EP93XX_GPIO_A_IRQ_BASE), - /* Bank B has 8 IRQs */ - EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, EP93XX_GPIO_B_IRQ_BASE), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0), - /* Bank F has 8 IRQs */ - EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, EP93XX_GPIO_F_IRQ_BASE), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0), -}; - static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset, unsigned long config) { @@ -342,110 +261,102 @@ static const struct irq_chip gpio_eic_irq_chip = { GPIOCHIP_IRQ_RESOURCE_HELPERS, }; -static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc, - struct platform_device *pdev, - struct ep93xx_gpio *epg, - struct ep93xx_gpio_bank *bank) +static int ep93xx_setup_irqs(struct platform_device *pdev, + struct ep93xx_gpio_chip *egc) { - void __iomem *data = epg->base + bank->data; - void __iomem *dir = epg->base + bank->dir; struct gpio_chip *gc = &egc->gc; struct device *dev = &pdev->dev; - struct gpio_irq_chip *girq; - int err; - - err = bgpio_init(gc, dev, 1, data, NULL, NULL, dir, NULL, 0); - if (err) - return err; - - gc->label = bank->label; - gc->base = bank->base; - - girq = &gc->irq; - if (bank->has_irq || bank->has_hierarchical_irq) { - gc->set_config = ep93xx_gpio_set_config; - egc->eic = devm_kcalloc(dev, 1, - sizeof(*egc->eic), - GFP_KERNEL); - if (!egc->eic) - return -ENOMEM; - egc->eic->irq_offset = bank->irq; - gpio_irq_chip_set_chip(girq, &gpio_eic_irq_chip); - } + struct gpio_irq_chip *girq = &gc->irq; + int ret, irq, i; + void __iomem *intr; - if (bank->has_irq) { - int ab_parent_irq = platform_get_irq(pdev, 0); - - girq->parent_handler = ep93xx_gpio_ab_irq_handler; - girq->num_parents = 1; - girq->parents = devm_kcalloc(dev, girq->num_parents, - sizeof(*girq->parents), - GFP_KERNEL); - if (!girq->parents) - return -ENOMEM; - girq->default_type = IRQ_TYPE_NONE; - girq->handler = handle_level_irq; - girq->parents[0] = ab_parent_irq; - girq->first = bank->irq_base; - } + intr = devm_platform_ioremap_resource_byname(pdev, "intr"); + if (IS_ERR(intr)) + return PTR_ERR(intr); + + gc->set_config = ep93xx_gpio_set_config; + egc->eic = devm_kzalloc(dev, sizeof(*egc->eic), GFP_KERNEL); + if (!egc->eic) + return -ENOMEM; - /* Only bank F has especially funky IRQ handling */ - if (bank->has_hierarchical_irq) { - int gpio_irq; - int i; + egc->eic->base = intr; + gpio_irq_chip_set_chip(girq, &gpio_eic_irq_chip); + girq->num_parents = platform_irq_count(pdev); + if (girq->num_parents == 0) + return -EINVAL; + + girq->parents = devm_kcalloc(dev, girq->num_parents, + sizeof(*girq->parents), + GFP_KERNEL); + if (!girq->parents) + return -ENOMEM; - /* - * FIXME: convert this to use hierarchical IRQ support! - * this requires fixing the root irqchip to be hierarchical. - */ + if (girq->num_parents == 1) { /* A/B irqchips */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_irq(dev, irq, ep93xx_ab_irq_handler, + IRQF_SHARED, gc->label, gc); + if (ret) + return dev_err_probe(dev, ret, "requesting IRQ: %d\n", irq); + + girq->parents[0] = irq; + } else { /* F irqchip */ girq->parent_handler = ep93xx_gpio_f_irq_handler; - girq->num_parents = 8; - girq->parents = devm_kcalloc(dev, girq->num_parents, - sizeof(*girq->parents), - GFP_KERNEL); - if (!girq->parents) - return -ENOMEM; - /* Pick resources 1..8 for these IRQs */ + for (i = 0; i < girq->num_parents; i++) { - girq->parents[i] = platform_get_irq(pdev, i + 1); - gpio_irq = bank->irq_base + i; - irq_set_chip_data(gpio_irq, &epg->gc[5]); - irq_set_chip_and_handler(gpio_irq, - girq->chip, - handle_level_irq); - irq_clear_status_flags(gpio_irq, IRQ_NOREQUEST); + irq = platform_get_irq(pdev, i); + if (irq < 0) + continue; + + girq->parents[i] = irq; } - girq->default_type = IRQ_TYPE_NONE; - girq->handler = handle_level_irq; - girq->first = bank->irq_base; + + girq->map = girq->parents; } - return devm_gpiochip_add_data(dev, gc, epg); + girq->default_type = IRQ_TYPE_NONE; + /* TODO: replace with handle_bad_irq() once we are fully hierarchical */ + girq->handler = handle_simple_irq; + + return 0; } static int ep93xx_gpio_probe(struct platform_device *pdev) { - struct ep93xx_gpio *epg; - int i; - - epg = devm_kzalloc(&pdev->dev, sizeof(*epg), GFP_KERNEL); - if (!epg) + struct ep93xx_gpio_chip *egc; + struct gpio_chip *gc; + void __iomem *data; + void __iomem *dir; + int ret; + + egc = devm_kzalloc(&pdev->dev, sizeof(*egc), GFP_KERNEL); + if (!egc) return -ENOMEM; - epg->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(epg->base)) - return PTR_ERR(epg->base); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct ep93xx_gpio_chip *gc = &epg->gc[i]; - struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i]; - - if (ep93xx_gpio_add_bank(gc, pdev, epg, bank)) - dev_warn(&pdev->dev, "Unable to add gpio bank %s\n", - bank->label); + data = devm_platform_ioremap_resource_byname(pdev, "data"); + if (IS_ERR(data)) + return PTR_ERR(data); + + dir = devm_platform_ioremap_resource_byname(pdev, "dir"); + if (IS_ERR(dir)) + return PTR_ERR(dir); + + gc = &egc->gc; + ret = bgpio_init(gc, &pdev->dev, 1, data, NULL, NULL, dir, NULL, 0); + if (ret) + return dev_err_probe(&pdev->dev, ret, "unable to init generic GPIO\n"); + + gc->label = dev_name(&pdev->dev); + if (platform_irq_count(pdev) > 0) { + dev_dbg(&pdev->dev, "setting up irqs for %s\n", dev_name(&pdev->dev)); + ret = ep93xx_setup_irqs(pdev, egc); + if (ret) + dev_err_probe(&pdev->dev, ret, "setup irqs failed"); } - return 0; + return devm_gpiochip_add_data(&pdev->dev, gc, egc); } static struct platform_driver ep93xx_gpio_driver = { -- cgit v1.2.3 From b3ab5787e7acb02874ae86cbe13969d4dd01a585 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:48 +0300 Subject: input: keypad: ep93xx: add DT support for Cirrus EP93xx - drop flags, they were not used anyway - add OF ID match table - process "autorepeat", "debounce-delay-ms", prescale from device tree - drop platform data usage and it's header - keymap goes from device tree now on Signed-off-by: Nikita Shubin Acked-by: Dmitry Torokhov Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/core.c | 46 --------------------- drivers/input/keyboard/ep93xx_keypad.c | 74 ++++++++++------------------------ include/linux/soc/cirrus/ep93xx.h | 4 -- 3 files changed, 22 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 03bce5e9d1f1..b99c46d22c4d 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -697,52 +697,6 @@ void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) platform_device_register(&ep93xx_keypad_device); } -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_c; - err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_d; - } - - /* Enable the keypad controller; GPIO ports C and D used for keypad */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); - - return 0; - -fail_gpio_d: - gpio_free(EP93XX_GPIO_LINE_C(i)); -fail_gpio_c: - for (--i; i >= 0; --i) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - return err; -} -EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio); - -void ep93xx_keypad_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 0; i < 8; i++) { - gpio_free(EP93XX_GPIO_LINE_C(i)); - gpio_free(EP93XX_GPIO_LINE_D(i)); - } - - /* Disable the keypad controller; GPIO ports C and D used for GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK); -} -EXPORT_SYMBOL(ep93xx_keypad_release_gpio); - /************************************************************************* * EP93xx I2S audio peripheral handling *************************************************************************/ diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index 6b811d6bf625..dcbc50304a5a 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -6,20 +6,13 @@ * * Based on the pxa27x matrix keypad controller by Rodolfo Giometti. * - * NOTE: - * - * The 3-key reset is triggered by pressing the 3 keys in - * Row 0, Columns 2, 4, and 7 at the same time. This action can - * be disabled by setting the EP93XX_KEYPAD_DISABLE_3_KEY flag. - * - * Normal operation for the matrix does not autorepeat the key press. - * This action can be enabled by setting the EP93XX_KEYPAD_AUTOREPEAT - * flag. */ #include +#include #include #include +#include #include #include #include @@ -27,7 +20,6 @@ #include #include #include -#include #include /* @@ -61,12 +53,16 @@ #define KEY_REG_KEY1_MASK GENMASK(5, 0) #define KEY_REG_KEY1_SHIFT 0 +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) + #define EP93XX_MATRIX_SIZE (EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS) struct ep93xx_keypad { - struct ep93xx_keypad_platform_data *pdata; struct input_dev *input_dev; struct clk *clk; + unsigned int debounce; + u16 prescale; void __iomem *mmio_base; @@ -133,23 +129,11 @@ static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id) static void ep93xx_keypad_config(struct ep93xx_keypad *keypad) { - struct ep93xx_keypad_platform_data *pdata = keypad->pdata; unsigned int val = 0; - clk_set_rate(keypad->clk, pdata->clk_rate); - - if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY) - val |= KEY_INIT_DIS3KY; - if (pdata->flags & EP93XX_KEYPAD_DIAG_MODE) - val |= KEY_INIT_DIAG; - if (pdata->flags & EP93XX_KEYPAD_BACK_DRIVE) - val |= KEY_INIT_BACK; - if (pdata->flags & EP93XX_KEYPAD_TEST_MODE) - val |= KEY_INIT_T2; - - val |= ((pdata->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK); + val |= (keypad->debounce << KEY_INIT_DBNC_SHIFT) & KEY_INIT_DBNC_MASK; - val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK); + val |= (keypad->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK; __raw_writel(val, keypad->mmio_base + KEY_INIT); } @@ -220,17 +204,10 @@ static int ep93xx_keypad_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops, ep93xx_keypad_suspend, ep93xx_keypad_resume); -static void ep93xx_keypad_release_gpio_action(void *_pdev) -{ - struct platform_device *pdev = _pdev; - - ep93xx_keypad_release_gpio(pdev); -} - static int ep93xx_keypad_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct ep93xx_keypad *keypad; - const struct matrix_keymap_data *keymap_data; struct input_dev *input_dev; int err; @@ -238,14 +215,6 @@ static int ep93xx_keypad_probe(struct platform_device *pdev) if (!keypad) return -ENOMEM; - keypad->pdata = dev_get_platdata(&pdev->dev); - if (!keypad->pdata) - return -EINVAL; - - keymap_data = keypad->pdata->keymap_data; - if (!keymap_data) - return -EINVAL; - keypad->irq = platform_get_irq(pdev, 0); if (keypad->irq < 0) return keypad->irq; @@ -254,19 +223,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev) if (IS_ERR(keypad->mmio_base)) return PTR_ERR(keypad->mmio_base); - err = ep93xx_keypad_acquire_gpio(pdev); - if (err) - return err; - - err = devm_add_action_or_reset(&pdev->dev, - ep93xx_keypad_release_gpio_action, pdev); - if (err) - return err; - keypad->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) return PTR_ERR(keypad->clk); + device_property_read_u32(dev, "debounce-delay-ms", &keypad->debounce); + device_property_read_u16(dev, "cirrus,prescale", &keypad->prescale); + input_dev = devm_input_allocate_device(&pdev->dev); if (!input_dev) return -ENOMEM; @@ -278,13 +241,13 @@ static int ep93xx_keypad_probe(struct platform_device *pdev) input_dev->open = ep93xx_keypad_open; input_dev->close = ep93xx_keypad_close; - err = matrix_keypad_build_keymap(keymap_data, NULL, + err = matrix_keypad_build_keymap(NULL, NULL, EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS, keypad->keycodes, input_dev); if (err) return err; - if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT) + if (device_property_read_bool(&pdev->dev, "autorepeat")) __set_bit(EV_REP, input_dev->evbit); input_set_drvdata(input_dev, keypad); @@ -313,10 +276,17 @@ static void ep93xx_keypad_remove(struct platform_device *pdev) dev_pm_clear_wake_irq(&pdev->dev); } +static const struct of_device_id ep93xx_keypad_of_ids[] = { + { .compatible = "cirrus,ep9307-keypad" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ep93xx_keypad_of_ids); + static struct platform_driver ep93xx_keypad_driver = { .driver = { .name = "ep93xx-keypad", .pm = pm_sleep_ptr(&ep93xx_keypad_pm_ops), + .of_match_table = ep93xx_keypad_of_ids, }, .probe = ep93xx_keypad_probe, .remove_new = ep93xx_keypad_remove, diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h index a27447971302..8942bfaf1545 100644 --- a/include/linux/soc/cirrus/ep93xx.h +++ b/include/linux/soc/cirrus/ep93xx.h @@ -41,8 +41,6 @@ int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); void ep93xx_pwm_release_gpio(struct platform_device *pdev); int ep93xx_ide_acquire_gpio(struct platform_device *pdev); void ep93xx_ide_release_gpio(struct platform_device *pdev); -int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); -void ep93xx_keypad_release_gpio(struct platform_device *pdev); int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); unsigned int ep93xx_chip_revision(void); @@ -52,8 +50,6 @@ static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {} static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; } static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {} -static inline int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { return 0; } -static inline void ep93xx_keypad_release_gpio(struct platform_device *pdev) {} static inline int ep93xx_i2s_acquire(void) { return 0; } static inline void ep93xx_i2s_release(void) {} static inline unsigned int ep93xx_chip_revision(void) { return 0; } -- cgit v1.2.3 From ed5244a1d63796deb56ca1822637b94e8c7cd424 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:54 +0300 Subject: ARM: dts: add Cirrus EP93XX SoC .dtsi Add support for Cirrus Logic EP93XX SoC's family. Co-developed-by: Alexander Sverdlin Signed-off-by: Alexander Sverdlin Signed-off-by: Nikita Shubin Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/cirrus/ep93xx.dtsi | 444 +++++++++++++++++++++++++++++++++++ 1 file changed, 444 insertions(+) create mode 100644 arch/arm/boot/dts/cirrus/ep93xx.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi new file mode 100644 index 000000000000..0dd1eee346ca --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Cirrus Logic systems EP93XX SoC + */ +#include +#include +#include +#include +/ { + soc: soc { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + syscon: syscon@80930000 { + compatible = "cirrus,ep9301-syscon", "syscon"; + reg = <0x80930000 0x1000>; + + #clock-cells = <1>; + clocks = <&xtali>; + + spi_default_pins: pins-spi { + function = "spi"; + groups = "ssp"; + }; + + ac97_default_pins: pins-ac97 { + function = "ac97"; + groups = "ac97"; + }; + + i2s_on_ssp_pins: pins-i2sonssp { + function = "i2s"; + groups = "i2s_on_ssp"; + }; + + i2s_on_ac97_pins: pins-i2sonac97 { + function = "i2s"; + groups = "i2s_on_ac97"; + }; + + gpio1_default_pins: pins-gpio1 { + function = "gpio"; + groups = "gpio1agrp"; + }; + + pwm1_default_pins: pins-pwm1 { + function = "pwm"; + groups = "pwm1"; + }; + + gpio2_default_pins: pins-gpio2 { + function = "gpio"; + groups = "gpio2agrp"; + }; + + gpio3_default_pins: pins-gpio3 { + function = "gpio"; + groups = "gpio3agrp"; + }; + + keypad_default_pins: pins-keypad { + function = "keypad"; + groups = "keypadgrp"; + }; + + gpio4_default_pins: pins-gpio4 { + function = "gpio"; + groups = "gpio4agrp"; + }; + + gpio6_default_pins: pins-gpio6 { + function = "gpio"; + groups = "gpio6agrp"; + }; + + gpio7_default_pins: pins-gpio7 { + function = "gpio"; + groups = "gpio7agrp"; + }; + + ide_default_pins: pins-ide { + function = "pata"; + groups = "idegrp"; + }; + + lcd_on_dram0_pins: pins-rasteronsdram0 { + function = "lcd"; + groups = "rasteronsdram0grp"; + }; + + lcd_on_dram3_pins: pins-rasteronsdram3 { + function = "lcd"; + groups = "rasteronsdram3grp"; + }; + }; + + adc: adc@80900000 { + compatible = "cirrus,ep9301-adc"; + reg = <0x80900000 0x28>; + clocks = <&syscon EP93XX_CLK_ADC>; + interrupt-parent = <&vic0>; + interrupts = <30>; + status = "disabled"; + }; + + /* + * The EP93XX expansion bus is a set of up to 7 each up to 16MB + * windows in the 256MB space from 0x50000000 to 0x5fffffff. + * But since we don't require to setup it in any way, we can + * represent it as a simple-bus. + */ + ebi: bus@80080000 { + compatible = "simple-bus"; + reg = <0x80080000 0x20>; + native-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + dma0: dma-controller@80000000 { + compatible = "cirrus,ep9301-dma-m2p"; + reg = <0x80000000 0x0040>, + <0x80000040 0x0040>, + <0x80000080 0x0040>, + <0x800000c0 0x0040>, + <0x80000240 0x0040>, + <0x80000200 0x0040>, + <0x800002c0 0x0040>, + <0x80000280 0x0040>, + <0x80000340 0x0040>, + <0x80000300 0x0040>; + clocks = <&syscon EP93XX_CLK_M2P0>, + <&syscon EP93XX_CLK_M2P1>, + <&syscon EP93XX_CLK_M2P2>, + <&syscon EP93XX_CLK_M2P3>, + <&syscon EP93XX_CLK_M2P4>, + <&syscon EP93XX_CLK_M2P5>, + <&syscon EP93XX_CLK_M2P6>, + <&syscon EP93XX_CLK_M2P7>, + <&syscon EP93XX_CLK_M2P8>, + <&syscon EP93XX_CLK_M2P9>; + clock-names = "m2p0", "m2p1", + "m2p2", "m2p3", + "m2p4", "m2p5", + "m2p6", "m2p7", + "m2p8", "m2p9"; + interrupt-parent = <&vic0>; + interrupts = <7>, <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>, <16>; + #dma-cells = <2>; + }; + + dma1: dma-controller@80000100 { + compatible = "cirrus,ep9301-dma-m2m"; + reg = <0x80000100 0x0040>, + <0x80000140 0x0040>; + clocks = <&syscon EP93XX_CLK_M2M0>, + <&syscon EP93XX_CLK_M2M1>; + clock-names = "m2m0", "m2m1"; + interrupt-parent = <&vic0>; + interrupts = <17>, <18>; + #dma-cells = <2>; + }; + + eth0: ethernet@80010000 { + compatible = "cirrus,ep9301-eth"; + reg = <0x80010000 0x10000>; + interrupt-parent = <&vic1>; + interrupts = <7>; + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gpio0: gpio@80840000 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840000 0x04>, + <0x80840010 0x04>, + <0x80840090 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio1: gpio@80840004 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840004 0x04>, + <0x80840014 0x04>, + <0x808400ac 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <27>; + }; + + gpio2: gpio@80840008 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840008 0x04>, + <0x80840018 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_default_pins>; + }; + + gpio3: gpio@8084000c { + compatible = "cirrus,ep9301-gpio"; + reg = <0x8084000c 0x04>, + <0x8084001c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio3_default_pins>; + }; + + gpio4: gpio@80840020 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840020 0x04>, + <0x80840024 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio4_default_pins>; + }; + + gpio5: gpio@80840030 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840030 0x04>, + <0x80840034 0x04>, + <0x8084004c 0x1c>; + reg-names = "data", "dir", "intr"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&vic0 19>, <&vic0 20>, + <&vic0 21>, <&vic0 22>, + <&vic1 15>, <&vic1 16>, + <&vic1 17>, <&vic1 18>; + }; + + gpio6: gpio@80840038 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840038 0x04>, + <0x8084003c 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio6_default_pins>; + }; + + gpio7: gpio@80840040 { + compatible = "cirrus,ep9301-gpio"; + reg = <0x80840040 0x04>, + <0x80840044 0x04>; + reg-names = "data", "dir"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio7_default_pins>; + }; + + i2s: i2s@80820000 { + compatible = "cirrus,ep9301-i2s"; + reg = <0x80820000 0x100>; + #sound-dai-cells = <0>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clocks = <&syscon EP93XX_CLK_I2S_MCLK>, + <&syscon EP93XX_CLK_I2S_SCLK>, + <&syscon EP93XX_CLK_I2S_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + dmas = <&dma0 0 1>, <&dma0 0 2>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + ide: ide@800a0000 { + compatible = "cirrus,ep9312-pata"; + reg = <0x800a0000 0x38>; + interrupt-parent = <&vic1>; + interrupts = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&ide_default_pins>; + status = "disabled"; + }; + + vic0: interrupt-controller@800b0000 { + compatible = "arm,pl192-vic"; + reg = <0x800b0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + valid-mask = <0x7ffffffc>; + valid-wakeup-mask = <0x0>; + }; + + vic1: interrupt-controller@800c0000 { + compatible = "arm,pl192-vic"; + reg = <0x800c0000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + valid-mask = <0x1fffffff>; + valid-wakeup-mask = <0x0>; + }; + + keypad: keypad@800f0000 { + compatible = "cirrus,ep9307-keypad"; + reg = <0x800f0000 0x0c>; + interrupt-parent = <&vic0>; + interrupts = <29>; + clocks = <&syscon EP93XX_CLK_KEYPAD>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_default_pins>; + linux,keymap = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pwm0: pwm@80910000 { + compatible = "cirrus,ep9301-pwm"; + reg = <0x80910000 0x10>; + clocks = <&syscon EP93XX_CLK_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@80910020 { + compatible = "cirrus,ep9301-pwm"; + reg = <0x80910020 0x10>; + clocks = <&syscon EP93XX_CLK_PWM>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_default_pins>; + status = "disabled"; + }; + + rtc0: rtc@80920000 { + compatible = "cirrus,ep9301-rtc"; + reg = <0x80920000 0x100>; + }; + + spi0: spi@808a0000 { + compatible = "cirrus,ep9301-spi"; + reg = <0x808a0000 0x18>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&vic1>; + interrupts = <21>; + clocks = <&syscon EP93XX_CLK_SPI>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_default_pins>; + status = "disabled"; + }; + + timer: timer@80810000 { + compatible = "cirrus,ep9301-timer"; + reg = <0x80810000 0x100>; + interrupt-parent = <&vic1>; + interrupts = <19>; + }; + + uart0: serial@808c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x808c0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>; + clock-names = "uartclk", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <20>; + status = "disabled"; + }; + + uart1: uart@808d0000 { + compatible = "arm,primecell"; + reg = <0x808d0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>; + clock-names = "apb:uart2", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <22>; + status = "disabled"; + }; + + uart2: uart@808b0000 { + compatible = "arm,primecell"; + reg = <0x808b0000 0x1000>; + arm,primecell-periphid = <0x00041010>; + clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>; + clock-names = "apb:uart3", "apb_pclk"; + interrupt-parent = <&vic1>; + interrupts = <23>; + status = "disabled"; + }; + + usb0: usb@80020000 { + compatible = "generic-ohci"; + reg = <0x80020000 0x10000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&syscon EP93XX_CLK_USB>; + status = "disabled"; + }; + + watchdog0: watchdog@80940000 { + compatible = "cirrus,ep9301-wdt"; + reg = <0x80940000 0x08>; + }; + }; + + xtali: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <14745600>; + clock-output-names = "xtali"; + }; +}; -- cgit v1.2.3 From 454b61d84484a5f761c86b89966eaac93177ca6f Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:55 +0300 Subject: ARM: dts: ep93xx: add ts7250 board Add device tree file for Technologic Systems ts7250 board and Liebherr bk3 board which have many in common, both are based on ep9302 SoC variant. Signed-off-by: Nikita Shubin Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/cirrus/Makefile | 3 + arch/arm/boot/dts/cirrus/ep93xx-bk3.dts | 125 +++++++++++++++++++++++++ arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts | 145 +++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+) create mode 100644 arch/arm/boot/dts/cirrus/ep93xx-bk3.dts create mode 100644 arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile index e944d3e2129d..211a7e2f2115 100644 --- a/arch/arm/boot/dts/cirrus/Makefile +++ b/arch/arm/boot/dts/cirrus/Makefile @@ -3,3 +3,6 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb +dtb-$(CONFIG_ARCH_EP93XX) += \ + ep93xx-bk3.dtb \ + ep93xx-ts7250.dtb diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts new file mode 100644 index 000000000000..40bc9b2a6ba8 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + model = "Liebherr controller BK3.1"; + compatible = "liebherr,bk3", "cirrus,ep9301"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&ebi { + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "System"; + reg = <0x00000000 0x01e00000>; + read-only; + }; + + partition@1e00000 { + label = "Data"; + reg = <0x01e00000 0x05f20000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&i2s { + dmas = <&dma0 0 1>, <&dma0 0 2>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_on_ac97_pins>; + status = "okay"; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&syscon 6 163 1>; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; + status = "okay"; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; + status = "okay"; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts new file mode 100644 index 000000000000..9e03f93d9fc8 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + compatible = "technologic,ts7250", "cirrus,ep9301"; + model = "TS-7250 SBC"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x00000000 0x02000000>, + <0x000530c0 0x01fdd000>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&ebi { + nand-controller@60000000 { + compatible = "technologic,ts7200-nand"; + reg = <0x60000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "TS-BOOTROM"; + reg = <0x00000000 0x00020000>; + read-only; + }; + + partition@20000 { + label = "Linux"; + reg = <0x00020000 0x07d00000>; + }; + + partition@7d20000 { + label = "RedBoot"; + reg = <0x07d20000 0x002e0000>; + read-only; + }; + }; + }; + }; + + rtc@10800000 { + compatible = "st,m48t86"; + reg = <0x10800000 0x1>, + <0x11700000 0x1>; + }; + + watchdog@23800000 { + compatible = "technologic,ts7200-wdt"; + reg = <0x23800000 0x01>, + <0x23c00000 0x01>; + timeout-sec = <30>; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&gpio1 { + /* PWM */ + gpio-ranges = <&syscon 6 163 1>; +}; + +/* ts7250 doesn't have GPIO Port D present */ +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; +}; + +&spi0 { + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + dmas = <&dma1 10 2>, <&dma1 10 1>; + dma-names = "rx", "tx"; + status = "okay"; + + tmp122: temperature-sensor@0 { + compatible = "ti,tmp122"; + reg = <0>; + spi-max-frequency = <2000000>; + }; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; -- cgit v1.2.3 From bd8511fba09ae399fc6812bcf4f8d60a803a6871 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 9 Sep 2024 11:10:56 +0300 Subject: ARM: dts: ep93xx: Add EDB9302 DT Add device tree for Cirrus EDB9302. Signed-off-by: Alexander Sverdlin Signed-off-by: Nikita Shubin Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/cirrus/Makefile | 1 + arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts | 181 ++++++++++++++++++++++++++++ 2 files changed, 182 insertions(+) create mode 100644 arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile index 211a7e2f2115..e6015983e464 100644 --- a/arch/arm/boot/dts/cirrus/Makefile +++ b/arch/arm/boot/dts/cirrus/Makefile @@ -4,5 +4,6 @@ dtb-$(CONFIG_ARCH_CLPS711X) += \ dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_EP93XX) += \ + ep93xx-edb9302.dtb \ ep93xx-bk3.dtb \ ep93xx-ts7250.dtb diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts new file mode 100644 index 000000000000..312b2be1c638 --- /dev/null +++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/* + * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC + */ +/dts-v1/; +#include "ep93xx.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cirrus,edb9302", "cirrus,ep9301"; + model = "cirrus,edb9302"; + + chosen { + }; + + memory@0 { + device_type = "memory"; + /* should be set from ATAGS */ + reg = <0x0000000 0x800000>, + <0x1000000 0x800000>, + <0x4000000 0x800000>, + <0x5000000 0x800000>; + }; + + sound { + compatible = "audio-graph-card2"; + label = "EDB93XX"; + links = <&i2s_port>; + }; + + leds { + compatible = "gpio-leds"; + led-0 { + label = "grled"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + }; + + led-1 { + label = "rdled"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_FAULT; + }; + }; +}; + +&adc { + status = "okay"; +}; + +&ebi { + flash@60000000 { + compatible = "cfi-flash"; + reg = <0x60000000 0x1000000>; + bank-width = <2>; + }; +}; + +ð0 { + phy-handle = <&phy0>; +}; + +&gpio0 { + gpio-ranges = <&syscon 0 153 1>, + <&syscon 1 152 1>, + <&syscon 2 151 1>, + <&syscon 3 148 1>, + <&syscon 4 147 1>, + <&syscon 5 146 1>, + <&syscon 6 145 1>, + <&syscon 7 144 1>; +}; + +&gpio1 { + gpio-ranges = <&syscon 0 143 1>, + <&syscon 1 142 1>, + <&syscon 2 141 1>, + <&syscon 3 140 1>, + <&syscon 4 165 1>, + <&syscon 5 164 1>, + <&syscon 6 163 1>, + <&syscon 7 160 1>; +}; + +&gpio2 { + gpio-ranges = <&syscon 0 115 1>; +}; + +/* edb9302 doesn't have GPIO Port D present */ +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + gpio-ranges = <&syscon 0 97 2>; +}; + +&gpio5 { + gpio-ranges = <&syscon 1 170 1>, + <&syscon 2 169 1>, + <&syscon 3 168 1>; +}; + +&gpio6 { + gpio-ranges = <&syscon 0 87 2>; +}; + +&gpio7 { + gpio-ranges = <&syscon 2 199 4>; +}; + +&i2s { + pinctrl-names = "default"; + pinctrl-0 = <&i2s_on_ac97_pins>; + status = "okay"; + i2s_port: port { + i2s_ep: endpoint { + system-clock-direction-out; + frame-master; + bitclock-master; + mclk-fs = <256>; + dai-format = "i2s"; + convert-channels = <2>; + convert-sample-format = "s32_le"; + remote-endpoint = <&codec_ep>; + }; + }; +}; + +&mdio0 { + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; +}; + +&spi0 { + cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW>; + dmas = <&dma1 10 2>, <&dma1 10 1>; + dma-names = "rx", "tx"; + status = "okay"; + + cs4271: codec@0 { + compatible = "cirrus,cs4271"; + reg = <0>; + #sound-dai-cells = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + port { + codec_ep: endpoint { + remote-endpoint = <&i2s_ep>; + }; + }; + }; + + at25f1024: eeprom@1 { + compatible = "atmel,at25"; + reg = <1>; + address-width = <8>; + size = <0x20000>; + pagesize = <256>; + spi-max-frequency = <20000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; -- cgit v1.2.3 From 046322f1e1d9879b8a598a0c57fcb81f87fd3f59 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:57 +0300 Subject: ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add compulsory device tree support to the Cirrus ep93xx ARMv4 platform. - select PINCTRL_EP93xx - select COMMON_CLK_EP93XX, as clock driver moved out of platform code - select ARCH_HAS_RESET_CONTROLLER Select ARM_ATAG_DTB_COMPAT to update device tree with information about memory passed from bootloader. We have to leave all MACH options as they are used for board checking before decomp, to turn off watchdog and ethernet DMA. Tested-by: Alexander Sverdlin Signed-off-by: Nikita Shubin Tested-by: Michael Peters Reviewed-by: Andy Shevchenko Reviewed-by: Krzysztof Kozlowski Reviewed-by: Guenter Roeck Reviewed-by: Mark Brown Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Reviewed-by: Kris Bahnsen Reviewed-by: Andrew Lunn Reviewed-by: Sergey Shtylyov Acked-by: Miquel Raynal Acked-by: Alexander Sverdlin Acked-by: Uwe Kleine-König Acked-by: Damien Le Moal Acked-by: Sebastian Reichel Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/Makefile | 1 - arch/arm/mach-ep93xx/Kconfig | 20 ++++++++++---------- arch/arm/mach-ep93xx/Makefile | 11 ----------- 3 files changed, 10 insertions(+), 22 deletions(-) delete mode 100644 arch/arm/mach-ep93xx/Makefile (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 71afdd98ddf2..aafebf145738 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -183,7 +183,6 @@ machine-$(CONFIG_ARCH_CLPS711X) += clps711x machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove -machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_GEMINI) += gemini diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index 703f3d232a60..812b71dcf60e 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -3,27 +3,27 @@ menuconfig ARCH_EP93XX bool "EP93xx-based" depends on ATAGS depends on ARCH_MULTI_V4T + # CONFIG_ARCH_MULTI_V7 is not set depends on CPU_LITTLE_ENDIAN + select ARCH_HAS_RESET_CONTROLLER select ARCH_SPARSEMEM_ENABLE select ARM_AMBA select ARM_VIC + select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select ARM_ATAG_DTB_COMPAT # we need this to update dt memory node + select COMMON_CLK_EP93XX + select EP93XX_TIMER select CLKSRC_MMIO select CPU_ARM920T select GPIOLIB + select PINCTRL + select PINCTRL_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. if ARCH_EP93XX -menu "Cirrus EP93xx Implementation Options" - -config EP93XX_SOC_COMMON - bool - default y - select SOC_BUS - select LEDS_GPIO_REGISTER - -comment "EP93xx Platforms" +# menu "EP93xx Platforms" config MACH_BK3 bool "Support Liebherr BK3.1" @@ -103,6 +103,6 @@ config MACH_VISION_EP9307 Say 'Y' here if you want your kernel to support the Vision Engraving Systems EP9307 SoM. -endmenu +# endmenu endif diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile deleted file mode 100644 index 62e37403df14..000000000000 --- a/arch/arm/mach-ep93xx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# -obj-y := core.o clock.o timer-ep93xx.o - -obj-$(CONFIG_EP93XX_DMA) += dma.o - -obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o -obj-$(CONFIG_MACH_TS72XX) += ts72xx.o -obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o -- cgit v1.2.3 From a48ac3dc569771c18fcafbc8351d820cc343c54a Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:58 +0300 Subject: pwm: ep93xx: drop legacy pinctrl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Drop legacy gpio request/free since we are using pinctrl for this now. Signed-off-by: Nikita Shubin Acked-by: Uwe Kleine-König Acked-by: Thierry Reding Acked-by: Linus Walleij Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/core.c | 42 --------------------------------------- drivers/pwm/pwm-ep93xx.c | 18 ----------------- include/linux/soc/cirrus/ep93xx.h | 4 ---- 3 files changed, 64 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index b99c46d22c4d..4ddf1a4cba33 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -577,48 +577,6 @@ void __init ep93xx_register_pwm(int pwm0, int pwm1) platform_device_register(&ep93xx_pwm1_device); } -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) -{ - int err; - - if (pdev->id == 0) { - err = 0; - } else if (pdev->id == 1) { - err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, - dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0); - if (err) - goto fail; - - /* PWM 1 output on EGPIO[14] */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG); - } else { - err = -ENODEV; - } - - return err; - -fail: - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - return err; -} -EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio); - -void ep93xx_pwm_release_gpio(struct platform_device *pdev) -{ - if (pdev->id == 1) { - gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14); - gpio_free(EP93XX_GPIO_LINE_EGPIO14); - - /* EGPIO[14] used for GPIO */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG); - } -} -EXPORT_SYMBOL(ep93xx_pwm_release_gpio); - - /************************************************************************* * EP93xx video peripheral handling *************************************************************************/ diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c index 67c3fdbf7ae3..994f89ac43b4 100644 --- a/drivers/pwm/pwm-ep93xx.c +++ b/drivers/pwm/pwm-ep93xx.c @@ -27,8 +27,6 @@ #include -#include /* for ep93xx_pwm_{acquire,release}_gpio() */ - #define EP93XX_PWMx_TERM_COUNT 0x00 #define EP93XX_PWMx_DUTY_CYCLE 0x04 #define EP93XX_PWMx_ENABLE 0x08 @@ -44,20 +42,6 @@ static inline struct ep93xx_pwm *to_ep93xx_pwm(struct pwm_chip *chip) return pwmchip_get_drvdata(chip); } -static int ep93xx_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) -{ - struct platform_device *pdev = to_platform_device(pwmchip_parent(chip)); - - return ep93xx_pwm_acquire_gpio(pdev); -} - -static void ep93xx_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) -{ - struct platform_device *pdev = to_platform_device(pwmchip_parent(chip)); - - ep93xx_pwm_release_gpio(pdev); -} - static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, const struct pwm_state *state) { @@ -156,8 +140,6 @@ static int ep93xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, } static const struct pwm_ops ep93xx_pwm_ops = { - .request = ep93xx_pwm_request, - .free = ep93xx_pwm_free, .apply = ep93xx_pwm_apply, }; diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h index 8942bfaf1545..f6376edc1b33 100644 --- a/include/linux/soc/cirrus/ep93xx.h +++ b/include/linux/soc/cirrus/ep93xx.h @@ -37,8 +37,6 @@ struct ep93xx_regmap_adev { container_of((_adev), struct ep93xx_regmap_adev, adev) #ifdef CONFIG_ARCH_EP93XX -int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); -void ep93xx_pwm_release_gpio(struct platform_device *pdev); int ep93xx_ide_acquire_gpio(struct platform_device *pdev); void ep93xx_ide_release_gpio(struct platform_device *pdev); int ep93xx_i2s_acquire(void); @@ -46,8 +44,6 @@ void ep93xx_i2s_release(void); unsigned int ep93xx_chip_revision(void); #else -static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return 0; } -static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {} static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; } static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {} static inline int ep93xx_i2s_acquire(void) { return 0; } -- cgit v1.2.3 From a632229be268dde8f6d407638b5cfba8b78201d6 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:59 +0300 Subject: ata: pata_ep93xx: remove legacy pinctrl use Drop legacy acquire/release since we are using pinctrl for this now. Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Reviewed-by: Sergey Shtylyov Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Reviewed-by: Mark Brown Reviewed-by: Krzysztof Kozlowski Reviewed-by: Andy Shevchenko Acked-by: Damien Le Moal Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/core.c | 72 --------------------------------------- drivers/ata/pata_ep93xx.c | 25 ++++---------- include/linux/soc/cirrus/ep93xx.h | 4 --- 3 files changed, 6 insertions(+), 95 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4ddf1a4cba33..9c6154bb37b5 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -779,78 +779,6 @@ void __init ep93xx_register_ide(void) platform_device_register(&ep93xx_ide_device); } -int ep93xx_ide_acquire_gpio(struct platform_device *pdev) -{ - int err; - int i; - - err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); - if (err) - return err; - err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); - if (err) - goto fail_egpio15; - for (i = 2; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_e; - } - for (i = 4; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_g; - } - for (i = 0; i < 8; i++) { - err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); - if (err) - goto fail_gpio_h; - } - - /* GPIO ports E[7:2], G[7:4] and H used by IDE */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - return 0; - -fail_gpio_h: - for (--i; i >= 0; --i) - gpio_free(EP93XX_GPIO_LINE_H(i)); - i = 8; -fail_gpio_g: - for (--i; i >= 4; --i) - gpio_free(EP93XX_GPIO_LINE_G(i)); - i = 8; -fail_gpio_e: - for (--i; i >= 2; --i) - gpio_free(EP93XX_GPIO_LINE_E(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); -fail_egpio15: - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - return err; -} -EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); - -void ep93xx_ide_release_gpio(struct platform_device *pdev) -{ - int i; - - for (i = 2; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_E(i)); - for (i = 4; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_G(i)); - for (i = 0; i < 8; i++) - gpio_free(EP93XX_GPIO_LINE_H(i)); - gpio_free(EP93XX_GPIO_LINE_EGPIO15); - gpio_free(EP93XX_GPIO_LINE_EGPIO2); - - - /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); -} -EXPORT_SYMBOL(ep93xx_ide_release_gpio); - /************************************************************************* * EP93xx ADC *************************************************************************/ diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c index 13246a92e29f..a8555f630097 100644 --- a/drivers/ata/pata_ep93xx.c +++ b/drivers/ata/pata_ep93xx.c @@ -922,28 +922,18 @@ static int ep93xx_pata_probe(struct platform_device *pdev) void __iomem *ide_base; int err; - err = ep93xx_ide_acquire_gpio(pdev); - if (err) - return err; - /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */ irq = platform_get_irq(pdev, 0); - if (irq < 0) { - err = irq; - goto err_rel_gpio; - } + if (irq < 0) + return irq; ide_base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem_res); - if (IS_ERR(ide_base)) { - err = PTR_ERR(ide_base); - goto err_rel_gpio; - } + if (IS_ERR(ide_base)) + return PTR_ERR(ide_base); drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL); - if (!drv_data) { - err = -ENOMEM; - goto err_rel_gpio; - } + if (!drv_data) + return -ENOMEM; drv_data->pdev = pdev; drv_data->ide_base = ide_base; @@ -1002,8 +992,6 @@ static int ep93xx_pata_probe(struct platform_device *pdev) err_rel_dma: ep93xx_pata_release_dma(drv_data); -err_rel_gpio: - ep93xx_ide_release_gpio(pdev); return err; } @@ -1015,7 +1003,6 @@ static void ep93xx_pata_remove(struct platform_device *pdev) ata_host_detach(host); ep93xx_pata_release_dma(drv_data); ep93xx_pata_clear_regs(drv_data->ide_base); - ep93xx_ide_release_gpio(pdev); } static const struct of_device_id ep93xx_pata_of_ids[] = { diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h index f6376edc1b33..142c33a2d7db 100644 --- a/include/linux/soc/cirrus/ep93xx.h +++ b/include/linux/soc/cirrus/ep93xx.h @@ -37,15 +37,11 @@ struct ep93xx_regmap_adev { container_of((_adev), struct ep93xx_regmap_adev, adev) #ifdef CONFIG_ARCH_EP93XX -int ep93xx_ide_acquire_gpio(struct platform_device *pdev); -void ep93xx_ide_release_gpio(struct platform_device *pdev); int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); unsigned int ep93xx_chip_revision(void); #else -static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; } -static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {} static inline int ep93xx_i2s_acquire(void) { return 0; } static inline void ep93xx_i2s_release(void) {} static inline unsigned int ep93xx_chip_revision(void) { return 0; } -- cgit v1.2.3 From e5ef574dda702e62081d5c7991949cbdb7f65c08 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:11:00 +0300 Subject: ARM: ep93xx: delete all boardfiles Delete the ep93xx board files. Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/clock.c | 733 ------------------------ arch/arm/mach-ep93xx/core.c | 955 ------------------------------- arch/arm/mach-ep93xx/dma.c | 114 ---- arch/arm/mach-ep93xx/edb93xx.c | 368 ------------ arch/arm/mach-ep93xx/ep93xx-regs.h | 38 -- arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 ---- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 --- arch/arm/mach-ep93xx/platform.h | 42 -- arch/arm/mach-ep93xx/soc.h | 212 ------- arch/arm/mach-ep93xx/timer-ep93xx.c | 143 ----- arch/arm/mach-ep93xx/ts72xx.c | 422 -------------- arch/arm/mach-ep93xx/ts72xx.h | 94 --- arch/arm/mach-ep93xx/vision_ep9307.c | 321 ----------- include/linux/platform_data/spi-ep93xx.h | 15 - 15 files changed, 3669 deletions(-) delete mode 100644 arch/arm/mach-ep93xx/clock.c delete mode 100644 arch/arm/mach-ep93xx/core.c delete mode 100644 arch/arm/mach-ep93xx/dma.c delete mode 100644 arch/arm/mach-ep93xx/edb93xx.c delete mode 100644 arch/arm/mach-ep93xx/ep93xx-regs.h delete mode 100644 arch/arm/mach-ep93xx/gpio-ep93xx.h delete mode 100644 arch/arm/mach-ep93xx/hardware.h delete mode 100644 arch/arm/mach-ep93xx/irqs.h delete mode 100644 arch/arm/mach-ep93xx/platform.h delete mode 100644 arch/arm/mach-ep93xx/soc.h delete mode 100644 arch/arm/mach-ep93xx/timer-ep93xx.c delete mode 100644 arch/arm/mach-ep93xx/ts72xx.c delete mode 100644 arch/arm/mach-ep93xx/ts72xx.h delete mode 100644 arch/arm/mach-ep93xx/vision_ep9307.c delete mode 100644 include/linux/platform_data/spi-ep93xx.h (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c deleted file mode 100644 index e9f72a529b50..000000000000 --- a/arch/arm/mach-ep93xx/clock.c +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/clock.c - * Clock control for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hardware.h" - -#include - -#include "soc.h" - -static DEFINE_SPINLOCK(clk_lock); - -static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; -static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; -static char pclk_divisors[] = { 1, 2, 4, 8 }; - -static char adc_divisors[] = { 16, 4 }; -static char sclk_divisors[] = { 2, 4 }; -static char lrclk_divisors[] = { 32, 64, 128 }; - -static const char * const mux_parents[] = { - "xtali", - "pll1", - "pll2" -}; - -/* - * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS - */ -static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word) -{ - int i; - - rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ - rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ - do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ - for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ - rate >>= 1; - - return (unsigned long)rate; -} - -struct clk_psc { - struct clk_hw hw; - void __iomem *reg; - u8 bit_idx; - u32 mask; - u8 shift; - u8 width; - char *div; - u8 num_div; - spinlock_t *lock; -}; - -#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) - -static int ep93xx_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = readl(psc->reg); - - return (val & BIT(psc->bit_idx)) ? 1 : 0; -} - -static int ep93xx_clk_enable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val |= BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static void ep93xx_clk_disable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); -} - -static const struct clk_ops clk_ep93xx_gate_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, -}; - -static struct clk_hw *ep93xx_clk_register_gate(const char *name, - const char *parent_name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ep93xx_gate_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->hw.init = &init; - psc->lock = &clk_lock; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - - return &psc->hw; -} - -static u8 ep93xx_mux_get_parent(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - - if (!(val & EP93XX_SYSCON_CLKDIV_ESEL)) - return 0; - - if (!(val & EP93XX_SYSCON_CLKDIV_PSEL)) - return 1; - - return 2; -} - -static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (index >= ARRAY_SIZE(mux_parents)) - return -EINVAL; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL); - - - if (index != 0) { - val |= EP93XX_SYSCON_CLKDIV_ESEL; - val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0; - } - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static bool is_best(unsigned long rate, unsigned long now, - unsigned long best) -{ - return abs(rate - now) < abs(rate - best); -} - -static int ep93xx_mux_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - unsigned long rate = req->rate; - struct clk *best_parent = NULL; - unsigned long __parent_rate; - unsigned long best_rate = 0, actual_rate, mclk_rate; - unsigned long best_parent_rate; - int __div = 0, __pdiv = 0; - int i; - - /* - * Try the two pll's and the external clock - * Because the valid predividers are 2, 2.5 and 3, we multiply - * all the clocks by 2 to avoid floating point math. - * - * This is based on the algorithm in the ep93xx raster guide: - * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf - * - */ - for (i = 0; i < ARRAY_SIZE(mux_parents); i++) { - struct clk *parent = clk_get_sys(mux_parents[i], NULL); - - __parent_rate = clk_get_rate(parent); - mclk_rate = __parent_rate * 2; - - /* Try each predivider value */ - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - best_rate = actual_rate; - best_parent_rate = __parent_rate; - best_parent = parent; - } - } - } - - if (!best_parent) - return -EINVAL; - - req->best_parent_rate = best_parent_rate; - req->best_parent_hw = __clk_get_hw(best_parent); - req->rate = best_rate; - - return 0; -} - -static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long rate = 0; - u32 val = __raw_readl(psc->reg); - int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03); - int __div = val & 0x7f; - - if (__div > 0) - rate = (parent_rate * 2) / ((__pdiv + 3) * __div); - - return rate; -} - -static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - int pdiv = 0, div = 0; - unsigned long best_rate = 0, actual_rate, mclk_rate; - int __div = 0, __pdiv = 0; - u32 val; - - mclk_rate = parent_rate * 2; - - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - pdiv = __pdiv - 3; - div = __div; - best_rate = actual_rate; - } - } - - if (!best_rate) - return -EINVAL; - - val = __raw_readl(psc->reg); - - /* Clear old dividers */ - val &= ~0x37f; - - /* Set the new pdiv and div bits for the new clock rate */ - val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops clk_ddiv_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .get_parent = ep93xx_mux_get_parent, - .set_parent = ep93xx_mux_set_parent_lock, - .determine_rate = ep93xx_mux_determine_rate, - .recalc_rate = ep93xx_ddiv_recalc_rate, - .set_rate = ep93xx_ddiv_set_rate, -}; - -static struct clk_hw *clk_hw_register_ddiv(const char *name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ddiv_ops; - init.flags = 0; - init.parent_names = mux_parents; - init.num_parents = ARRAY_SIZE(mux_parents); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - u8 index = (val & psc->mask) >> psc->shift; - - if (index >= psc->num_div) - return 0; - - return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); -} - -static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long best = 0, now, maxdiv; - int i; - - maxdiv = psc->div[psc->num_div - 1]; - - for (i = 0; i < psc->num_div; i++) { - if ((rate * psc->div[i]) == *parent_rate) - return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - if (is_best(rate, now, best)) - best = now; - } - - if (!best) - best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv); - - return best; -} - -static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg) & ~psc->mask; - int i; - - for (i = 0; i < psc->num_div; i++) - if (rate == parent_rate / psc->div[i]) { - val |= i << psc->shift; - break; - } - - if (i == psc->num_div) - return -EINVAL; - - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops ep93xx_div_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .recalc_rate = ep93xx_div_recalc_rate, - .round_rate = ep93xx_div_round_rate, - .set_rate = ep93xx_div_set_rate, -}; - -static struct clk_hw *clk_hw_register_div(const char *name, - const char *parent_name, - void __iomem *reg, - u8 enable_bit, - u8 shift, - u8 width, - char *clk_divisors, - u8 num_div) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &ep93xx_div_ops; - init.flags = 0; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = 1; - - psc->reg = reg; - psc->bit_idx = enable_bit; - psc->mask = GENMASK(shift + width - 1, shift); - psc->shift = shift; - psc->div = clk_divisors; - psc->num_div = num_div; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -struct ep93xx_gate { - unsigned int bit; - const char *dev_id; - const char *con_id; -}; - -static struct ep93xx_gate ep93xx_uarts[] = { - {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL}, - {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL}, - {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL}, -}; - -static void __init ep93xx_uart_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - u32 value; - unsigned int clk_uart_div; - - value = __raw_readl(EP93XX_SYSCON_PWRCNT); - if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - clk_uart_div = 1; - else - clk_uart_div = 2; - - hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div); - - /* parenting uart gate clocks to uart clock */ - for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) { - hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id, - "uart", - EP93XX_SYSCON_DEVCFG, - ep93xx_uarts[i].bit); - - clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id); - } -} - -static struct ep93xx_gate ep93xx_dmas[] = { - {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"}, -}; - -static void __init ep93xx_dma_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - int ret; - - for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) { - hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id, - "hclk", 0, - EP93XX_SYSCON_PWRCNT, - ep93xx_dmas[i].bit, - 0, - &clk_lock); - - ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL); - if (ret) - pr_err("%s: failed to register lookup %s\n", - __func__, ep93xx_dmas[i].con_id); - } -} - -static int __init ep93xx_clock_init(void) -{ - u32 value; - struct clk_hw *hw; - unsigned long clk_pll1_rate; - unsigned long clk_f_rate; - unsigned long clk_h_rate; - unsigned long clk_p_rate; - unsigned long clk_pll2_rate; - unsigned int clk_f_div; - unsigned int clk_h_div; - unsigned int clk_p_div; - unsigned int clk_usb_div; - unsigned long clk_spi_div; - - hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE); - clk_hw_register_clkdev(hw, NULL, "xtali"); - - /* Determine the bootloader configured pll1 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET1); - if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) - clk_pll1_rate = EP93XX_EXT_CLK_RATE; - else - clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - - hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate); - clk_hw_register_clkdev(hw, NULL, "pll1"); - - /* Initialize the pll1 derived clocks */ - clk_f_div = fclk_divisors[(value >> 25) & 0x7]; - clk_h_div = hclk_divisors[(value >> 20) & 0x7]; - clk_p_div = pclk_divisors[(value >> 18) & 0x3]; - - hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div); - clk_f_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div); - clk_h_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div); - clk_p_rate = clk_get_rate(hw->clk); - - clk_hw_register_clkdev(hw, "apb_pclk", NULL); - - ep93xx_dma_clock_init(); - - /* Determine the bootloader configured pll2 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET2); - if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) - clk_pll2_rate = EP93XX_EXT_CLK_RATE; - else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) - clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - else - clk_pll2_rate = 0; - - hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate); - clk_hw_register_clkdev(hw, NULL, "pll2"); - - /* Initialize the pll2 derived clocks */ - /* - * These four bits set the divide ratio between the PLL2 - * output and the USB clock. - * 0000 - Divide by 1 - * 0001 - Divide by 2 - * 0010 - Divide by 3 - * 0011 - Divide by 4 - * 0100 - Divide by 5 - * 0101 - Divide by 6 - * 0110 - Divide by 7 - * 0111 - Divide by 8 - * 1000 - Divide by 9 - * 1001 - Divide by 10 - * 1010 - Divide by 11 - * 1011 - Divide by 12 - * 1100 - Divide by 13 - * 1101 - Divide by 14 - * 1110 - Divide by 15 - * 1111 - Divide by 1 - * On power-on-reset these bits are reset to 0000b. - */ - clk_usb_div = (((value >> 28) & 0xf) + 1); - hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div); - hw = clk_hw_register_gate(NULL, "ohci-platform", - "usb_clk", 0, - EP93XX_SYSCON_PWRCNT, - EP93XX_SYSCON_PWRCNT_USH_EN, - 0, - &clk_lock); - clk_hw_register_clkdev(hw, NULL, "ohci-platform"); - - /* - * EP93xx SSP clock rate was doubled in version E2. For more information - * see: - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - clk_spi_div = 1; - if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) - clk_spi_div = 2; - hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div); - clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0"); - - /* pwm clock */ - hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1); - clk_hw_register_clkdev(hw, "pwm_clk", NULL); - - pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", - clk_pll1_rate / 1000000, clk_pll2_rate / 1000000); - pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", - clk_f_rate / 1000000, clk_h_rate / 1000000, - clk_p_rate / 1000000); - - ep93xx_uart_clock_init(); - - /* touchscreen/adc clock */ - hw = clk_hw_register_div("ep93xx-adc", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_TSEN, - EP93XX_SYSCON_KEYTCHCLKDIV_ADIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-adc"); - - /* keypad clock */ - hw = clk_hw_register_div("ep93xx-keypad", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_KEN, - EP93XX_SYSCON_KEYTCHCLKDIV_KDIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad"); - - /* On reset PDIV and VDIV is set to zero, while PDIV zero - * means clock disable, VDIV shouldn't be zero. - * So i set both dividers to minimum. - */ - /* ENA - Enable CLK divider. */ - /* PDIV - 00 - Disable clock */ - /* VDIV - at least 2 */ - /* Check and enable video clk registers */ - value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV); - - /* check and enable i2s clk registers */ - value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV); - - /* video clk */ - hw = clk_hw_register_ddiv("ep93xx-fb", - EP93XX_SYSCON_VIDCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-fb"); - - /* i2s clk */ - hw = clk_hw_register_ddiv("mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s"); - - /* i2s sclk */ -#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16 -#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1 - hw = clk_hw_register_div("sclk", - "mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_SDIV_SHIFT, - EP93XX_I2SCLKDIV_SDIV_WIDTH, - sclk_divisors, - ARRAY_SIZE(sclk_divisors)); - - clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s"); - - /* i2s lrclk */ -#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17 -#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3 - hw = clk_hw_register_div("lrclk", - "sclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_LRDIV32_SHIFT, - EP93XX_I2SCLKDIV_LRDIV32_WIDTH, - lrclk_divisors, - ARRAY_SIZE(lrclk_divisors)); - - clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s"); - - return 0; -} -postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c deleted file mode 100644 index 9c6154bb37b5..000000000000 --- a/arch/arm/mach-ep93xx/core.c +++ /dev/null @@ -1,955 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/core.c - * Core routines for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2007 Herbert Valerio Riedel - * - * Thanks go to Michael Burian and Ray Lehtiniemi for their key - * role in the ep93xx linux community. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hardware.h" -#include -#include -#include -#include - -#include "gpio-ep93xx.h" - -#include -#include - -#include "soc.h" -#include "irqs.h" - -/************************************************************************* - * Static I/O mappings that are needed for all EP93xx platforms - *************************************************************************/ -static struct map_desc ep93xx_io_desc[] __initdata = { - { - .virtual = EP93XX_AHB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), - .length = EP93XX_AHB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = EP93XX_APB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), - .length = EP93XX_APB_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init ep93xx_map_io(void) -{ - iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); -} - -/************************************************************************* - * EP93xx IRQ handling - *************************************************************************/ -void __init ep93xx_init_irq(void) -{ - vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0); -} - - -/************************************************************************* - * EP93xx System Controller Software Locked register handling - *************************************************************************/ - -/* - * syscon_swlock prevents anything else from writing to the syscon - * block while a software locked register is being written. - */ -static DEFINE_SPINLOCK(syscon_swlock); - -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) -{ - unsigned long flags; - - spin_lock_irqsave(&syscon_swlock, flags); - - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, reg); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&syscon_swlock, flags); - - val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val &= ~clear_bits; - val |= set_bits; - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, EP93XX_SYSCON_DEVCFG); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -/** - * ep93xx_chip_revision() - returns the EP93xx chip revision - * - * See "platform.h" for more information. - */ -unsigned int ep93xx_chip_revision(void) -{ - unsigned int v; - - v = __raw_readl(EP93XX_SYSCON_SYSCFG); - v &= EP93XX_SYSCON_SYSCFG_REV_MASK; - v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; - return v; -} -EXPORT_SYMBOL_GPL(ep93xx_chip_revision); - -/************************************************************************* - * EP93xx GPIO - *************************************************************************/ -/* port A */ -static struct resource ep93xx_a_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), -}; - -static struct platform_device ep93xx_a_gpio = { - .name = "gpio-ep93xx", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources), - .resource = ep93xx_a_gpio_resources, -}; - -/* port B */ -static struct resource ep93xx_b_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), -}; - -static struct platform_device ep93xx_b_gpio = { - .name = "gpio-ep93xx", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources), - .resource = ep93xx_b_gpio_resources, -}; - -/* port C */ -static struct resource ep93xx_c_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"), -}; - -static struct platform_device ep93xx_c_gpio = { - .name = "gpio-ep93xx", - .id = 2, - .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources), - .resource = ep93xx_c_gpio_resources, -}; - -/* port D */ -static struct resource ep93xx_d_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"), -}; - -static struct platform_device ep93xx_d_gpio = { - .name = "gpio-ep93xx", - .id = 3, - .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources), - .resource = ep93xx_d_gpio_resources, -}; - -/* port E */ -static struct resource ep93xx_e_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"), -}; - -static struct platform_device ep93xx_e_gpio = { - .name = "gpio-ep93xx", - .id = 4, - .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources), - .resource = ep93xx_e_gpio_resources, -}; - -/* port F */ -static struct resource ep93xx_f_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), -}; - -static struct platform_device ep93xx_f_gpio = { - .name = "gpio-ep93xx", - .id = 5, - .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources), - .resource = ep93xx_f_gpio_resources, -}; - -/* port G */ -static struct resource ep93xx_g_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"), -}; - -static struct platform_device ep93xx_g_gpio = { - .name = "gpio-ep93xx", - .id = 6, - .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources), - .resource = ep93xx_g_gpio_resources, -}; - -static struct platform_device *ep93xx_gpio_device[] __initdata = { - &ep93xx_a_gpio, - &ep93xx_b_gpio, - &ep93xx_c_gpio, - &ep93xx_d_gpio, - &ep93xx_e_gpio, - &ep93xx_f_gpio, - &ep93xx_g_gpio, -}; - -/************************************************************************* - * EP93xx peripheral handling - *************************************************************************/ -#define EP93XX_UART_MCR_OFFSET (0x0100) - -static void ep93xx_uart_set_mctrl(struct amba_device *dev, - void __iomem *base, unsigned int mctrl) -{ - unsigned int mcr; - - mcr = 0; - if (mctrl & TIOCM_RTS) - mcr |= 2; - if (mctrl & TIOCM_DTR) - mcr |= 1; - - __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); -} - -static struct amba_pl010_data ep93xx_uart_data = { - .set_mctrl = ep93xx_uart_set_mctrl, -}; - -static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, - { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); - -static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, - { IRQ_EP93XX_UART2 }, NULL); - -static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, - { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); - -static struct resource ep93xx_rtc_resource[] = { - DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), -}; - -static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), - .resource = ep93xx_rtc_resource, -}; - -/************************************************************************* - * EP93xx OHCI USB Host - *************************************************************************/ - -static struct clk *ep93xx_ohci_host_clock; - -static int ep93xx_ohci_power_on(struct platform_device *pdev) -{ - if (!ep93xx_ohci_host_clock) { - ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(ep93xx_ohci_host_clock)) - return PTR_ERR(ep93xx_ohci_host_clock); - } - - return clk_prepare_enable(ep93xx_ohci_host_clock); -} - -static void ep93xx_ohci_power_off(struct platform_device *pdev) -{ - clk_disable(ep93xx_ohci_host_clock); -} - -static struct usb_ohci_pdata ep93xx_ohci_pdata = { - .power_on = ep93xx_ohci_power_on, - .power_off = ep93xx_ohci_power_off, - .power_suspend = ep93xx_ohci_power_off, -}; - -static struct resource ep93xx_ohci_resources[] = { - DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), - DEFINE_RES_IRQ(IRQ_EP93XX_USB), -}; - -static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_ohci_device = { - .name = "ohci-platform", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, - .dev = { - .dma_mask = &ep93xx_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ep93xx_ohci_pdata, - }, -}; - -/************************************************************************* - * EP93xx physmap'ed flash - *************************************************************************/ -static struct physmap_flash_data ep93xx_flash_data; - -static struct resource ep93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ep93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ep93xx_flash_data, - }, - .num_resources = 1, - .resource = &ep93xx_flash_resource, -}; - -/** - * ep93xx_register_flash() - Register the external flash device. - * @width: bank width in octets - * @start: resource start address - * @size: resource size - */ -void __init ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - ep93xx_flash_data.width = width; - - ep93xx_flash_resource.start = start; - ep93xx_flash_resource.end = start + size - 1; - - platform_device_register(&ep93xx_flash); -} - - -/************************************************************************* - * EP93xx ethernet peripheral handling - *************************************************************************/ -static struct ep93xx_eth_data ep93xx_eth_data; - -static struct resource ep93xx_eth_resource[] = { - DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), - DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), -}; - -static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_eth_device = { - .name = "ep93xx-eth", - .id = -1, - .dev = { - .platform_data = &ep93xx_eth_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_eth_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_eth_resource), - .resource = ep93xx_eth_resource, -}; - -/** - * ep93xx_register_eth - Register the built-in ethernet platform device. - * @data: platform specific ethernet configuration (__initdata) - * @copy_addr: flag indicating that the MAC address should be copied - * from the IndAd registers (as programmed by the bootloader) - */ -void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) -{ - if (copy_addr) - memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); - - ep93xx_eth_data = *data; - platform_device_register(&ep93xx_eth_device); -} - - -/************************************************************************* - * EP93xx i2c peripheral handling - *************************************************************************/ - -/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ -static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/** - * ep93xx_register_i2c - Register the i2c platform device. - * @devices: platform specific i2c bus device information (__initdata) - * @num: the number of devices on the i2c bus - */ -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) -{ - /* - * FIXME: this just sets the two pins as non-opendrain, as no - * platforms tries to do that anyway. Flag the applicable lines - * as open drain in the GPIO_LOOKUP above and the driver or - * gpiolib will handle open drain/open drain emulation as need - * be. Right now i2c-gpio emulates open drain which is not - * optimal. - */ - __raw_writel((0 << 1) | (0 << 0), - EP93XX_GPIO_EEDRIVE); - - i2c_register_board_info(0, devices, num); - gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); - platform_device_register(&ep93xx_i2c_device); -} - -/************************************************************************* - * EP93xx SPI peripheral handling - *************************************************************************/ -static struct ep93xx_spi_info ep93xx_spi_master_data; - -static struct resource ep93xx_spi_resources[] = { - DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), - DEFINE_RES_IRQ(IRQ_EP93XX_SSP), -}; - -static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_spi_device = { - .name = "ep93xx-spi", - .id = 0, - .dev = { - .platform_data = &ep93xx_spi_master_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_spi_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_spi_resources), - .resource = ep93xx_spi_resources, -}; - -/** - * ep93xx_register_spi() - registers spi platform device - * @info: ep93xx board specific spi master info (__initdata) - * @devices: SPI devices to register (__initdata) - * @num: number of SPI devices to register - * - * This function registers platform device for the EP93xx SPI controller and - * also makes sure that SPI pins are muxed so that I2S is not using those pins. - */ -void __init ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num) -{ - /* - * When SPI is used, we need to make sure that I2S is muxed off from - * SPI pins. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); - - ep93xx_spi_master_data = *info; - spi_register_board_info(devices, num); - platform_device_register(&ep93xx_spi_device); -} - -/************************************************************************* - * EP93xx LEDs - *************************************************************************/ -static const struct gpio_led ep93xx_led_pins[] __initconst = { - { - .name = "platform:grled", - }, { - .name = "platform:rdled", - }, -}; - -static const struct gpio_led_platform_data ep93xx_led_data __initconst = { - .num_leds = ARRAY_SIZE(ep93xx_led_pins), - .leds = ep93xx_led_pins, -}; - -static struct gpiod_lookup_table ep93xx_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - /* Use local offsets on gpiochip/port "E" */ - GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH), - { } - }, -}; - -/************************************************************************* - * EP93xx pwm peripheral handling - *************************************************************************/ -static struct resource ep93xx_pwm0_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), -}; - -static struct platform_device ep93xx_pwm0_device = { - .name = "ep93xx-pwm", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), - .resource = ep93xx_pwm0_resource, -}; - -static struct resource ep93xx_pwm1_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), -}; - -static struct platform_device ep93xx_pwm1_device = { - .name = "ep93xx-pwm", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), - .resource = ep93xx_pwm1_resource, -}; - -void __init ep93xx_register_pwm(int pwm0, int pwm1) -{ - if (pwm0) - platform_device_register(&ep93xx_pwm0_device); - - /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ - if (pwm1) - platform_device_register(&ep93xx_pwm1_device); -} - -/************************************************************************* - * EP93xx video peripheral handling - *************************************************************************/ -static struct ep93xxfb_mach_info ep93xxfb_data; - -static struct resource ep93xx_fb_resource[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), -}; - -static struct platform_device ep93xx_fb_device = { - .name = "ep93xx-fb", - .id = -1, - .dev = { - .platform_data = &ep93xxfb_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_fb_resource), - .resource = ep93xx_fb_resource, -}; - -/* The backlight use a single register in the framebuffer's register space */ -#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 - -static struct resource ep93xx_bl_resources[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + - EP93XX_RASTER_REG_BRIGHTNESS, 0x04), -}; - -static struct platform_device ep93xx_bl_device = { - .name = "ep93xx-bl", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_bl_resources), - .resource = ep93xx_bl_resources, -}; - -/** - * ep93xx_register_fb - Register the framebuffer platform device. - * @data: platform specific framebuffer configuration (__initdata) - */ -void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) -{ - ep93xxfb_data = *data; - platform_device_register(&ep93xx_fb_device); - platform_device_register(&ep93xx_bl_device); -} - - -/************************************************************************* - * EP93xx matrix keypad peripheral handling - *************************************************************************/ -static struct ep93xx_keypad_platform_data ep93xx_keypad_data; - -static struct resource ep93xx_keypad_resource[] = { - DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), - DEFINE_RES_IRQ(IRQ_EP93XX_KEY), -}; - -static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .dev = { - .platform_data = &ep93xx_keypad_data, - }, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, -}; - -/** - * ep93xx_register_keypad - Register the keypad platform device. - * @data: platform specific keypad configuration (__initdata) - */ -void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) -{ - ep93xx_keypad_data = *data; - platform_device_register(&ep93xx_keypad_device); -} - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ(IRQ_EP93XX_SAI), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -static struct platform_device ep93xx_pcm_device = { - .name = "ep93xx-pcm-audio", - .id = -1, -}; - -void __init ep93xx_register_i2s(void) -{ - platform_device_register(&ep93xx_i2s_device); - platform_device_register(&ep93xx_pcm_device); -} - -#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ - EP93XX_SYSCON_DEVCFG_I2SONAC97) - -#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ - EP93XX_SYSCON_I2SCLKDIV_SPOL) - -int ep93xx_i2s_acquire(void) -{ - unsigned val; - - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, - EP93XX_SYSCON_DEVCFG_I2S_MASK); - - /* - * This is potentially racy with the clock api for i2s_mclk, sclk and - * lrclk. Since the i2s driver is the only user of those clocks we - * rely on it to prevent parallel use of this function and the - * clock api for the i2s clocks. - */ - val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - val &= ~EP93XX_I2SCLKDIV_MASK; - val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; - ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); - - return 0; -} -EXPORT_SYMBOL(ep93xx_i2s_acquire); - -void ep93xx_i2s_release(void) -{ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); -} -EXPORT_SYMBOL(ep93xx_i2s_release); - -/************************************************************************* - * EP93xx AC97 audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_ac97_resources[] = { - DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), - DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), -}; - -static struct platform_device ep93xx_ac97_device = { - .name = "ep93xx-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ac97_resources), - .resource = ep93xx_ac97_resources, -}; - -void __init ep93xx_register_ac97(void) -{ - /* - * Make sure that the AC97 pins are not used by I2S. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - - platform_device_register(&ep93xx_ac97_device); - platform_device_register(&ep93xx_pcm_device); -} - -/************************************************************************* - * EP93xx Watchdog - *************************************************************************/ -static struct resource ep93xx_wdt_resources[] = { - DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), -}; - -static struct platform_device ep93xx_wdt_device = { - .name = "ep93xx-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), - .resource = ep93xx_wdt_resources, -}; - -/************************************************************************* - * EP93xx IDE - *************************************************************************/ -static struct resource ep93xx_ide_resources[] = { - DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), - DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), -}; - -static struct platform_device ep93xx_ide_device = { - .name = "ep93xx-ide", - .id = -1, - .dev = { - .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ep93xx_ide_resources), - .resource = ep93xx_ide_resources, -}; - -void __init ep93xx_register_ide(void) -{ - platform_device_register(&ep93xx_ide_device); -} - -/************************************************************************* - * EP93xx ADC - *************************************************************************/ -static struct resource ep93xx_adc_resources[] = { - DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28), - DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH), -}; - -static struct platform_device ep93xx_adc_device = { - .name = "ep93xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_adc_resources), - .resource = ep93xx_adc_resources, -}; - -void __init ep93xx_register_adc(void) -{ - /* Power up ADC, deactivate Touch Screen Controller */ - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN, - EP93XX_SYSCON_DEVCFG_ADCPD); - - platform_device_register(&ep93xx_adc_device); -} - -/************************************************************************* - * EP93xx Security peripheral - *************************************************************************/ - -/* - * The Maverick Key is 256 bits of micro fuses blown at the factory during - * manufacturing to uniquely identify a part. - * - * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key - */ -#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) -#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400) -#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410) -#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) -#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450) -#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460) -#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500) -#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504) -#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520) -#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524) -#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700) -#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704) -#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708) -#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c) - -static char ep93xx_soc_id[33]; - -static const char __init *ep93xx_get_soc_id(void) -{ - unsigned int id, id2, id3, id4, id5; - - if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1) - return "bad Hamming code"; - - id = __raw_readl(EP93XX_SECURITY_UNIQID); - id2 = __raw_readl(EP93XX_SECURITY_UNIQID2); - id3 = __raw_readl(EP93XX_SECURITY_UNIQID3); - id4 = __raw_readl(EP93XX_SECURITY_UNIQID4); - id5 = __raw_readl(EP93XX_SECURITY_UNIQID5); - - if (id != id2) - return "invalid"; - - /* Toss the unique ID into the entropy pool */ - add_device_randomness(&id2, 4); - add_device_randomness(&id3, 4); - add_device_randomness(&id4, 4); - add_device_randomness(&id5, 4); - - snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), - "%08x%08x%08x%08x", id2, id3, id4, id5); - - return ep93xx_soc_id; -} - -static const char __init *ep93xx_get_soc_rev(void) -{ - int rev = ep93xx_chip_revision(); - - switch (rev) { - case EP93XX_CHIP_REV_D0: - return "D0"; - case EP93XX_CHIP_REV_D1: - return "D1"; - case EP93XX_CHIP_REV_E0: - return "E0"; - case EP93XX_CHIP_REV_E1: - return "E1"; - case EP93XX_CHIP_REV_E2: - return "E2"; - default: - return "unknown"; - } -} - -static const char __init *ep93xx_get_machine_name(void) -{ - return kasprintf(GFP_KERNEL,"%s", machine_desc->name); -} - -static struct device __init *ep93xx_init_soc(void) -{ - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return NULL; - - soc_dev_attr->machine = ep93xx_get_machine_name(); - soc_dev_attr->family = "Cirrus Logic EP93xx"; - soc_dev_attr->revision = ep93xx_get_soc_rev(); - soc_dev_attr->soc_id = ep93xx_get_soc_id(); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->machine); - kfree(soc_dev_attr); - return NULL; - } - - return soc_device_to_device(soc_dev); -} - -struct device __init *ep93xx_init_devices(void) -{ - struct device *parent; - unsigned int i; - - /* Disallow access to MaverickCrunch initially */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - - /* Default all ports to GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - parent = ep93xx_init_soc(); - - /* Get the GPIO working early, other devices need it */ - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++) - platform_device_register(ep93xx_gpio_device[i]); - - amba_device_register(&uart1_device, &iomem_resource); - amba_device_register(&uart2_device, &iomem_resource); - amba_device_register(&uart3_device, &iomem_resource); - - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_wdt_device); - - gpiod_add_lookup_table(&ep93xx_leds_gpio_table); - gpio_led_register_device(-1, &ep93xx_led_data); - - return parent; -} - -void ep93xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Set then clear the SWRST bit to initiate a software reset - */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); - - while (1) - ; -} diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c deleted file mode 100644 index 74515acab8ef..000000000000 --- a/arch/arm/mach-ep93xx/dma.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/dma.c - * - * Platform support code for the EP93xx dmaengine driver. - * - * Copyright (C) 2011 Mika Westerberg - * - * This work is based on the original dma-m2p implementation with - * following copyrights: - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2006 Applied Data Systems - * Copyright (C) 2009 Ryan Mallon - */ - -#include -#include -#include -#include -#include -#include - -#include -#include "hardware.h" - -#include "soc.h" - -#define DMA_CHANNEL(_name, _base, _irq) \ - { .name = (_name), .base = (_base), .irq = (_irq) } - -/* - * DMA M2P channels. - * - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { - DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), - DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), - DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), - DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), - DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), - DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), - DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), - DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), - DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), - DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { - .channels = ep93xx_dma_m2p_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), -}; - -static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2p_device = { - .name = "ep93xx-dma-m2p", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2p_data, - .dma_mask = &ep93xx_dma_m2p_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* - * DMA M2M channels. - * - * There are 2 M2M channels which support memcpy/memset and in addition simple - * hardware requests from/to SSP and IDE. We do not implement an external - * hardware requests. - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { - DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), - DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { - .channels = ep93xx_dma_m2m_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), -}; - -static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2m_device = { - .name = "ep93xx-dma-m2m", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2m_data, - .dma_mask = &ep93xx_dma_m2m_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static int __init ep93xx_dma_init(void) -{ - platform_device_register(&ep93xx_dma_m2p_device); - platform_device_register(&ep93xx_dma_m2m_device); - return 0; -} -arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c deleted file mode 100644 index 356b0460c7ed..000000000000 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/edb93xx.c - * Cirrus Logic EDB93xx Development Board support. - * - * EDB93XX, EDB9301, EDB9307A - * Copyright (C) 2008-2009 H Hartley Sweeten - * - * EDB9302 - * Copyright (C) 2006 George Kashperko - * - * EDB9302A, EDB9315, EDB9315A - * Copyright (C) 2006 Lennert Buytenhek - * - * EDB9307 - * Copyright (C) 2007 Herbert Valerio Riedel - * - * EDB9312 - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "hardware.h" -#include -#include -#include "gpio-ep93xx.h" - -#include -#include - -#include "soc.h" - -static void __init edb93xx_register_flash(void) -{ - if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { - ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); - } else { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } -} - -static struct ep93xx_eth_data __initdata edb93xx_eth_data = { - .phy_id = 1, -}; - - -/************************************************************************* - * EDB93xx i2c peripheral handling - *************************************************************************/ - -static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - }, -}; - -static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, -}; - -static void __init edb93xx_register_i2c(void) -{ - if (machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_board_info, - ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9302() || machine_is_edb9307() - || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_board_info, - ARRAY_SIZE(edb93xx_i2c_board_info)); - } -} - - -/************************************************************************* - * EDB93xx SPI peripheral handling - *************************************************************************/ -static struct cs4271_platform_data edb93xx_cs4271_data = { - /* Intentionally left blank */ -}; - -static struct spi_board_info edb93xx_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &edb93xx_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init edb93xx_register_spi(void) -{ - if (machine_is_edb9301() || machine_is_edb9302()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table); - else if (machine_is_edb9302a() || machine_is_edb9307a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table); - else if (machine_is_edb9315a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table); - - gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); - ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, - ARRAY_SIZE(edb93xx_spi_board_info)); -} - - -/************************************************************************* - * EDB93xx I2S - *************************************************************************/ -static struct platform_device edb93xx_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static int __init edb93xx_has_audio(void) -{ - return (machine_is_edb9301() || machine_is_edb9302() || - machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()); -} - -static void __init edb93xx_register_i2s(void) -{ - if (edb93xx_has_audio()) { - ep93xx_register_i2s(); - platform_device_register(&edb93xx_audio_device); - } -} - - -/************************************************************************* - * EDB93xx pwm - *************************************************************************/ -static void __init edb93xx_register_pwm(void) -{ - if (machine_is_edb9301() || - machine_is_edb9302() || machine_is_edb9302a()) { - /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */ - ep93xx_register_pwm(0, 1); - } else if (machine_is_edb9307() || machine_is_edb9307a()) { - /* EP9307 only has pwm.0 (PWMOUT) */ - ep93xx_register_pwm(1, 0); - } else { - /* EP9312 and EP9315 have both */ - ep93xx_register_pwm(1, 1); - } -} - - -/************************************************************************* - * EDB93xx framebuffer - *************************************************************************/ -static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { - .flags = 0, -}; - -static int __init edb93xx_has_fb(void) -{ - /* These platforms have an ep93xx with video capability */ - return machine_is_edb9307() || machine_is_edb9307a() || - machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_fb(void) -{ - if (!edb93xx_has_fb()) - return; - - if (machine_is_edb9307a() || machine_is_edb9315a()) - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0; - else - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3; - - ep93xx_register_fb(&edb93xxfb_info); -} - - -/************************************************************************* - * EDB93xx IDE - *************************************************************************/ -static int __init edb93xx_has_ide(void) -{ - /* - * Although EDB9312 and EDB9315 do have IDE capability, they have - * INTRQ line wired as pull-up, which makes using IDE interface - * problematic. - */ - return machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_ide(void) -{ - if (!edb93xx_has_ide()) - return; - - ep93xx_register_ide(); -} - - -static void __init edb93xx_init_machine(void) -{ - ep93xx_init_devices(); - edb93xx_register_flash(); - ep93xx_register_eth(&edb93xx_eth_data, 1); - edb93xx_register_i2c(); - edb93xx_register_spi(); - edb93xx_register_i2s(); - edb93xx_register_pwm(); - edb93xx_register_fb(); - edb93xx_register_ide(); - ep93xx_register_adc(); -} - - -#ifdef CONFIG_MACH_EDB9301 -MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302 -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302A -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307 -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307A -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9312 -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315 -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315A -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h deleted file mode 100644 index 8fa3646de0a4..000000000000 --- a/arch/arm/mach-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) -#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - -#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) -#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* APB UARTs */ -#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) -#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) - -#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) -#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) - -#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) -#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) - -#endif diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h deleted file mode 100644 index 7b46eb7e5507..000000000000 --- a/arch/arm/mach-ep93xx/gpio-ep93xx.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Include file for the EP93XX GPIO controller machine specifics */ - -#ifndef __GPIO_EP93XX_H -#define __GPIO_EP93XX_H - -#include "ep93xx-regs.h" - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h deleted file mode 100644 index e7d850e04782..000000000000 --- a/arch/arm/mach-ep93xx/hardware.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/hardware.h - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "platform.h" - -/* - * The EP93xx has two external crystal oscillators. To generate the - * required high-frequency clocks, the processor uses two phase-locked- - * loops (PLLs) to multiply the incoming external clock signal to much - * higher frequencies that are then divided down by programmable dividers - * to produce the needed clocks. The PLLs operate independently of one - * another. - */ -#define EP93XX_EXT_CLK_RATE 14745600 -#define EP93XX_EXT_RTC_RATE 32768 - -#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4) -#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16) - -#endif diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h deleted file mode 100644 index 353201b90c66..000000000000 --- a/arch/arm/mach-ep93xx/irqs.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_VIC0 1 - -#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2) -#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3) -#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4) -#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5) -#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6) -#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7) -#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8) -#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9) -#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10) -#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11) -#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12) -#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13) -#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14) -#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15) -#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16) -#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17) -#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18) -#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19) -#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20) -#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21) -#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22) -#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23) -#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24) -#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25) -#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26) -#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27) -#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28) -#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29) -#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30) -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32) - -#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0) -#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1) -#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2) -#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3) -#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4) -#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5) -#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6) -#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7) -#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8) -#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9) -#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10) -#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11) -#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12) -#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13) -#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14) -#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15) -#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16) -#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17) -#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18) -#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19) -#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20) -#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21) -#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22) -#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23) -#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24) -#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25) -#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26) -#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27) -#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28) -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#endif diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h deleted file mode 100644 index 5fb1b919133f..000000000000 --- a/arch/arm/mach-ep93xx/platform.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/platform.h - */ - -#ifndef __ASSEMBLY__ - -#include -#include - -struct device; -struct i2c_board_info; -struct spi_board_info; -struct platform_device; -struct ep93xxfb_mach_info; -struct ep93xx_keypad_platform_data; -struct ep93xx_spi_info; - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); - -void ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size); - -void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); -void ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num); -void ep93xx_register_fb(struct ep93xxfb_mach_info *data); -void ep93xx_register_pwm(int pwm0, int pwm1); -void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -void ep93xx_register_i2s(void); -void ep93xx_register_ac97(void); -void ep93xx_register_ide(void); -void ep93xx_register_adc(void); - -struct device *ep93xx_init_devices(void); -extern void ep93xx_timer_init(void); - -void ep93xx_restart(enum reboot_mode, const char *); - -#endif diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h deleted file mode 100644 index 3245ebbd5069..000000000000 --- a/arch/arm/mach-ep93xx/soc.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-ep93xx/soc.h - * - * Copyright (C) 2012 Open Kernel Labs - * Copyright (C) 2012 Ryan Mallon - */ - -#ifndef _EP93XX_SOC_H -#define _EP93XX_SOC_H - -#include "ep93xx-regs.h" -#include "irqs.h" - -/* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000) -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - -/* System controller */ -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN 28 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN 24 -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN 20 -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN 18 -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE 15 -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA 31 -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31 -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - -#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c deleted file mode 100644 index a9efa7bc2fa1..000000000000 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "soc.h" -#include "platform.h" - -/************************************************************************* - * Timer handling for EP93xx - ************************************************************************* - * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and - * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate - * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, - * is free-running, and can't generate interrupts. - * - * The 508 kHz timers are ideal for use for the timer interrupt, as the - * most common values of HZ divide 508 kHz nicely. We pick the 32 bit - * timer (timer 3) to get as long sleep intervals as possible when using - * CONFIG_NO_HZ. - * - * The higher clock rate of timer 4 makes it a better choice than the - * other timers for use as clock source and for sched_clock(), providing - * a stable 40 bit time base. - ************************************************************************* - */ -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) -#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) -#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_TIMER123_RATE 508469 -#define EP93XX_TIMER4_RATE 983040 - -static u64 notrace ep93xx_read_sched_clock(void) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return ret; -} - -static u64 ep93xx_clocksource_read(struct clocksource *c) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return (u64) ret; -} - -static int ep93xx_clkevt_set_next_event(unsigned long next, - struct clock_event_device *evt) -{ - /* Default mode: periodic, off, 508 kHz */ - u32 tmode = EP93XX_TIMER123_CONTROL_MODE | - EP93XX_TIMER123_CONTROL_CLKSEL; - - /* Clear timer */ - writel(tmode, EP93XX_TIMER3_CONTROL); - - /* Set next event */ - writel(next, EP93XX_TIMER3_LOAD); - writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, - EP93XX_TIMER3_CONTROL); - return 0; -} - - -static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) -{ - /* Disable timer */ - writel(0, EP93XX_TIMER3_CONTROL); - - return 0; -} - -static struct clock_event_device ep93xx_clockevent = { - .name = "timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = ep93xx_clkevt_shutdown, - .set_state_oneshot = ep93xx_clkevt_shutdown, - .tick_resume = ep93xx_clkevt_shutdown, - .set_next_event = ep93xx_clkevt_set_next_event, - .rating = 300, -}; - -static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Writing any value clears the timer interrupt */ - writel(1, EP93XX_TIMER3_CLEAR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -void __init ep93xx_timer_init(void) -{ - int irq = IRQ_EP93XX_TIMER3; - unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; - - /* Enable and register clocksource and sched_clock on timer 4 */ - writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, - EP93XX_TIMER4_VALUE_HIGH); - clocksource_mmio_init(NULL, "timer4", - EP93XX_TIMER4_RATE, 200, 40, - ep93xx_clocksource_read); - sched_clock_register(ep93xx_read_sched_clock, 40, - EP93XX_TIMER4_RATE); - - /* Set up clockevent on timer 3 */ - if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", - &ep93xx_clockevent)) - pr_err("Failed to request irq %d (ep93xx timer)\n", irq); - clockevents_config_and_register(&ep93xx_clockevent, - EP93XX_TIMER123_RATE, - 1, - 0xffffffffU); -} diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c deleted file mode 100644 index 0bbdf587c685..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/ts72xx.c - * Technologic Systems TS72xx SBC support. - * - * Copyright (C) 2006 Lennert Buytenhek - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "gpio-ep93xx.h" -#include "hardware.h" - -#include -#include -#include - -#include "soc.h" -#include "ts72xx.h" - -/************************************************************************* - * IO map - *************************************************************************/ -static struct map_desc ts72xx_io_desc[] __initdata = { - { - .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), - .length = TS72XX_MODEL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), - .length = TS72XX_OPTIONS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), - .length = TS72XX_OPTIONS2_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), - .length = TS72XX_CPLDVER_SIZE, - .type = MT_DEVICE, - } -}; - -static void __init ts72xx_map_io(void) -{ - ep93xx_map_io(); - iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); -} - - -/************************************************************************* - * NAND flash - *************************************************************************/ -#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ -#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ - -static void ts72xx_nand_hwcontrol(struct nand_chip *chip, - int cmd, unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = chip->legacy.IO_ADDR_R; - unsigned char bits; - - addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); - - bits = __raw_readb(addr) & ~0x07; - bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ - bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ - bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ - - __raw_writeb(bits, addr); - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, chip->legacy.IO_ADDR_W); -} - -static int ts72xx_nand_device_ready(struct nand_chip *chip) -{ - void __iomem *addr = chip->legacy.IO_ADDR_R; - - addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); - - return !!(__raw_readb(addr) & 0x20); -} - -#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) -#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) - -static struct mtd_partition ts72xx_nand_parts[] = { - { - .name = "TS-BOOTROM", - .offset = 0, - .size = TS72XX_BOOTROM_PART_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Linux", - .offset = MTDPART_OFS_RETAIN, - .size = TS72XX_REDBOOT_PART_SIZE, - /* leave so much for last partition */ - }, { - .name = "RedBoot", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static struct platform_nand_data ts72xx_nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .chip_delay = 15, - }, - .ctrl = { - .cmd_ctrl = ts72xx_nand_hwcontrol, - .dev_ready = ts72xx_nand_device_ready, - }, -}; - -static struct resource ts72xx_nand_resource[] = { - { - .start = 0, /* filled in later */ - .end = 0, /* filled in later */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts72xx_nand_flash = { - .name = "gen_nand", - .id = -1, - .dev.platform_data = &ts72xx_nand_data, - .resource = ts72xx_nand_resource, - .num_resources = ARRAY_SIZE(ts72xx_nand_resource), -}; - -static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, - resource_size_t start) -{ - /* - * TS7200 has NOR flash all other TS72xx board have NAND flash. - */ - if (board_is_ts7200()) { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } else { - ts72xx_nand_resource[0].start = start; - ts72xx_nand_resource[0].end = start + SZ_16M - 1; - - ts72xx_nand_data.chip.partitions = parts; - ts72xx_nand_data.chip.nr_partitions = n; - - platform_device_register(&ts72xx_nand_flash); - } -} - -/************************************************************************* - * RTC M48T86 - *************************************************************************/ -#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) -#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) - -static struct resource ts72xx_rtc_resources[] = { - DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_rtc_device = { - .name = "rtc-m48t86", - .id = -1, - .resource = ts72xx_rtc_resources, - .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), -}; - -/************************************************************************* - * Watchdog (in CPLD) - *************************************************************************/ -#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) -#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) - -static struct resource ts72xx_wdt_resources[] = { - DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_wdt_device = { - .name = "ts72xx-wdt", - .id = -1, - .resource = ts72xx_wdt_resources, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), -}; - -/************************************************************************* - * ETH - *************************************************************************/ -static struct ep93xx_eth_data __initdata ts72xx_eth_data = { - .phy_id = 1, -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 -#define BK3_EN_SDCARD_PWR 0x0 -#define BK3_DIS_SDCARD_PWR 0x0C -static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) -{ - void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); - - if (!pwr_sd) { - pr_err("Failed to enable SD card power!"); - return; - } - - pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, - !!vdd ? "ON" : "OFF", vdd); - - if (!!vdd) - __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); - else - __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); - - iounmap(pwr_sd); -} - -static struct mmc_spi_platform_data bk3_spi_mmc_data = { - .detect_delay = 500, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_NONREMOVABLE, - .setpower = bk3_mmc_spi_setpower, -}; - -/************************************************************************* - * SPI Bus - SD card access - *************************************************************************/ -static struct spi_board_info bk3_spi_board_info[] __initdata = { - { - .modalias = "mmc_spi", - .platform_data = &bk3_spi_mmc_data, - .max_speed_hz = 7.4E6, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -/* - * This is a stub -> the FGPIO[3] pin is not connected on the schematic - * The all work is performed automatically by !SPI_FRAME (SFRM1) and - * goes through CPLD - */ -static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info bk3_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * TS72XX support code - *************************************************************************/ -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - -/* Relative to EP93XX_CS1_PHYS_BASE */ -#define TS73XX_FPGA_LOADER_BASE 0x03c00000 - -static struct resource ts73xx_fpga_resources[] = { - { - .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, - .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts73xx_fpga_device = { - .name = "ts73xx-fpga-mgr", - .id = -1, - .resource = ts73xx_fpga_resources, - .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), -}; - -#endif - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info ts72xx_spi_devices[] __initdata = { - { - .modalias = "tmp122", - .max_speed_hz = 2 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - /* DIO_17 */ - GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static void __init ts72xx_init_machine(void) -{ - ep93xx_init_devices(); - ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), - is_ts9420_installed() ? - EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); - platform_device_register(&ts72xx_rtc_device); - platform_device_register(&ts72xx_wdt_device); - - ep93xx_register_eth(&ts72xx_eth_data, 1); -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - if (board_is_ts7300()) - platform_device_register(&ts73xx_fpga_device); -#endif - gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); - ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, - ARRAY_SIZE(ts72xx_spi_devices)); -} - -MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = ts72xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-spilink-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -/************************************************************************* - * BK3 support code - *************************************************************************/ -static struct mtd_partition bk3_nand_parts[] = { - { - .name = "System", - .offset = 0x00000000, - .size = 0x01e00000, - }, { - .name = "Data", - .offset = 0x01e00000, - .size = 0x05f20000 - }, { - .name = "RedBoot", - .offset = 0x07d20000, - .size = 0x002e0000, - .mask_flags = MTD_WRITEABLE, /* force RO */ - }, -}; - -static void __init bk3_init_machine(void) -{ - ep93xx_init_devices(); - - ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), - EP93XX_CS6_PHYS_BASE); - - ep93xx_register_eth(&ts72xx_eth_data, 1); - - gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); - ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, - ARRAY_SIZE(bk3_spi_board_info)); - - /* Configure ep93xx's I2S to use AC97 pins */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - platform_device_register(&ep93xx_i2s_device); -} - -MACHINE_START(BK3, "Liebherr controller BK3.1") - /* Maintainer: Lukasz Majewski */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = bk3_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h deleted file mode 100644 index 00b4941d29c9..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register (bits 0-2) - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 23400000 4K CPLD version register - */ - -#ifndef __TS72XX_H_ -#define __TS72XX_H_ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 -#define TS72XX_MODEL_TS7300 0x03 -#define TS72XX_MODEL_TS7400 0x04 -#define TS72XX_MODEL_MASK 0x07 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - -#define TS72XX_CPLDVER_PHYS_BASE 0x23400000 -#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000) -#define TS72XX_CPLDVER_SIZE 0x00001000 - -#ifndef __ASSEMBLY__ - -static inline int ts72xx_model(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; -} - -static inline int board_is_ts7200(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7260; -} - -static inline int board_is_ts7300(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7300; -} - -static inline int board_is_ts7400(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7400; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif -#endif /* __TS72XX_H_ */ diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c deleted file mode 100644 index b3087b8eed3f..000000000000 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ /dev/null @@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/vision_ep9307.c - * Vision Engraving Systems EP9307 SoM support. - * - * Copyright (C) 2008-2011 Vision Engraving Systems - * H Hartley Sweeten - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "hardware.h" -#include -#include -#include "gpio-ep93xx.h" - -#include -#include -#include - -#include "soc.h" - -/************************************************************************* - * Static I/O mappings for the FPGA - *************************************************************************/ -#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE -#define VISION_VIRT_BASE 0xfebff000 - -static struct map_desc vision_io_desc[] __initdata = { - { - .virtual = VISION_VIRT_BASE, - .pfn = __phys_to_pfn(VISION_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void __init vision_map_io(void) -{ - ep93xx_map_io(); - - iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); -} - -/************************************************************************* - * Ethernet - *************************************************************************/ -static struct ep93xx_eth_data vision_eth_data __initdata = { - .phy_id = 1, -}; - -/************************************************************************* - * Framebuffer - *************************************************************************/ -#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 - -static int vision_lcd_setup(struct platform_device *pdev) -{ - int err; - - err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, - dev_name(&pdev->dev)); - if (err) - return err; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | - EP93XX_SYSCON_DEVCFG_RASONP3 | - EP93XX_SYSCON_DEVCFG_EXVC); - - return 0; -} - -static void vision_lcd_teardown(struct platform_device *pdev) -{ - gpio_free(VISION_LCD_ENABLE); -} - -static void vision_lcd_blank(int blank_mode, struct fb_info *info) -{ - if (blank_mode) - gpio_set_value(VISION_LCD_ENABLE, 0); - else - gpio_set_value(VISION_LCD_ENABLE, 1); -} - -static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { - .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, - .setup = vision_lcd_setup, - .teardown = vision_lcd_teardown, - .blank = vision_lcd_blank, -}; - - -/************************************************************************* - * GPIO Expanders - *************************************************************************/ -#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) -#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) -#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) -#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) - -static struct pca953x_platform_data pca953x_74_gpio_data = { - .gpio_base = PCA9539_74_GPIO_BASE, - .irq_base = EP93XX_BOARD_IRQ(0), -}; - -static struct pca953x_platform_data pca953x_75_gpio_data = { - .gpio_base = PCA9539_75_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_76_gpio_data = { - .gpio_base = PCA9539_76_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_77_gpio_data = { - .gpio_base = PCA9539_77_GPIO_BASE, - .irq_base = -1, -}; - -/************************************************************************* - * I2C Bus - *************************************************************************/ - -static struct i2c_board_info vision_i2c_info[] __initdata = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - .irq = IRQ_EP93XX_EXT1, - }, { - I2C_BOARD_INFO("pca9539", 0x74), - .platform_data = &pca953x_74_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x75), - .platform_data = &pca953x_75_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x76), - .platform_data = &pca953x_76_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x77), - .platform_data = &pca953x_77_gpio_data, - }, -}; - -/************************************************************************* - * SPI CS4271 Audio Codec - *************************************************************************/ -static struct cs4271_platform_data vision_cs4271_data = { - /* Intentionally left blank */ -}; - -/************************************************************************* - * SPI Flash - *************************************************************************/ -static struct mtd_partition vision_spi_flash_partitions[] = { - { - .name = "SPI bootstrap", - .offset = 0, - .size = SZ_4K, - }, { - .name = "Bootstrap config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4K, - }, { - .name = "System config", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data vision_spi_flash_data = { - .name = "SPI Flash", - .parts = vision_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -static struct mmc_spi_platform_data vision_spi_mmc_data = { - .detect_delay = 100, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, -}; - -static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { - .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ - .table = { - /* Card detect */ - GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW), - /* Write protect */ - GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info vision_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &vision_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, { - .modalias = "sst25l", - .platform_data = &vision_spi_flash_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, { - .modalias = "mmc_spi", - .platform_data = &vision_spi_mmc_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 2, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { - .dev_id = "spi0.0", /* cs4271 @ CS0 */ - .table = { - /* RESET */ - GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info vision_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * I2S Audio - *************************************************************************/ -static struct platform_device vision_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static void __init vision_register_i2s(void) -{ - ep93xx_register_i2s(); - platform_device_register(&vision_audio_device); -} - -/************************************************************************* - * Machine Initialization - *************************************************************************/ -static void __init vision_init_machine(void) -{ - ep93xx_init_devices(); - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); - ep93xx_register_eth(&vision_eth_data, 1); - ep93xx_register_fb(&ep93xxfb_info); - ep93xx_register_pwm(1, 0); - - /* - * Request the gpio expander's interrupt gpio line now to prevent - * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). - */ - if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, - "pca9539:74")) - pr_warn("cannot request interrupt gpio for pca9539:74\n"); - - vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - - ep93xx_register_i2c(vision_i2c_info, - ARRAY_SIZE(vision_i2c_info)); - gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table); - gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); - gpiod_add_lookup_table(&vision_spi_cs_gpio_table); - ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, - ARRAY_SIZE(vision_spi_board_info)); - vision_register_i2s(); -} - -MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS, - .map_io = vision_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = vision_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h deleted file mode 100644 index b439f2a896e0..000000000000 --- a/include/linux/platform_data/spi-ep93xx.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - bool use_dma; -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ -- cgit v1.2.3