From 91f8ed835ffb34b4108cc16eefd3303e4068bee0 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 13:20:23 +0100 Subject: [ARM] 3578/1: AT91RM9200 Clock update Patch from Andrew Victor Some updates to the clock infrastructure for the AT91RM9200. 1. Hard-coded values replaced with names defined in at91rm9200_sys.h. 2. Added the four PIO clocks, which are enabled at startup. 3. At startup, disable all unused clocks. 4. Minor bugfix for usage counts associated with MCK. [Patch from David Brownell] 5. Added at91_clock_associate() function to associate device & function with a particular clock. [Patch from David Brownell] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/clock.c | 121 ++++++++++++++++++++++++++++++++------- 1 file changed, 101 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index 8b95467c6d61..30042d2bac5f 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -32,8 +32,6 @@ #include "generic.h" -#undef DEBUG - /* * There's a lot more which can be done with clocks, including cpufreq * integration, slow clock mode support (for system suspend), letting @@ -41,7 +39,9 @@ */ struct clk { - const char *name; + const char *name; /* unique clock name */ + const char *function; /* function of the clock */ + struct device *dev; /* device associated with function */ unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -71,15 +71,14 @@ static struct clk clk32k = { }; static struct clk main_clk = { .name = "main", - .pmc_mask = 1 << 0, /* in PMC_SR */ - .users = 1, + .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */ .id = 1, .primary = 1, }; static struct clk plla = { .name = "plla", .parent = &main_clk, - .pmc_mask = 1 << 1, /* in PMC_SR */ + .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */ .id = 2, .primary = 1, .pll = 1, @@ -105,7 +104,7 @@ static void pllb_mode(struct clk *clk, int is_on) static struct clk pllb = { .name = "pllb", .parent = &main_clk, - .pmc_mask = 1 << 2, /* in PMC_SR */ + .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */ .mode = pllb_mode, .id = 3, .primary = 1, @@ -177,8 +176,7 @@ static struct clk pck3 = { */ static struct clk mck = { .name = "mck", - .pmc_mask = 1 << 3, /* in PMC_SR */ - .users = 1, /* (must be) always on */ + .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; static void pmc_periph_mode(struct clk *clk, int is_on) @@ -249,6 +247,30 @@ static struct clk spi_clk = { .pmc_mask = 1 << AT91_ID_SPI, .mode = pmc_periph_mode, }; +static struct clk pioA_clk = { + .name = "pioA_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_PIOA, + .mode = pmc_periph_mode, +}; +static struct clk pioB_clk = { + .name = "pioB_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_PIOB, + .mode = pmc_periph_mode, +}; +static struct clk pioC_clk = { + .name = "pioC_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_PIOC, + .mode = pmc_periph_mode, +}; +static struct clk pioD_clk = { + .name = "pioD_clk", + .parent = &mck, + .pmc_mask = 1 << AT91_ID_PIOD, + .mode = pmc_periph_mode, +}; static struct clk *const clock_list[] = { /* four primary clocks -- MUST BE FIRST! */ @@ -279,21 +301,46 @@ static struct clk *const clock_list[] = { &udc_clk, &twi_clk, &spi_clk, + &pioA_clk, + &pioB_clk, + &pioC_clk, + &pioD_clk, // ssc0..ssc2 // tc0..tc5 + // irq0..irq6 &ohci_clk, ðer_clk, }; +/* + * Associate a particular clock with a function (eg, "uart") and device. + * The drivers can then request the same 'function' with several different + * devices and not care about which clock name to use. + */ +void __init at91_clock_associate(const char *id, struct device *dev, const char *func) +{ + struct clk *clk = clk_get(NULL, id); + + if (!dev || !clk || !IS_ERR(clk_get(dev, func))) + return; + + clk->function = func; + clk->dev = dev; +} + /* clocks are all static for now; no refcounting necessary */ struct clk *clk_get(struct device *dev, const char *id) { int i; for (i = 0; i < ARRAY_SIZE(clock_list); i++) { - if (strcmp(id, clock_list[i]->name) == 0) - return clock_list[i]; + struct clk *clk = clock_list[i]; + + if (strcmp(id, clk->name) == 0) + return clk; + if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) + return clk; } return ERR_PTR(-ENOENT); @@ -593,6 +640,30 @@ fail: return 0; } + +/* + * Several unused clocks may be active. Turn them off. + */ +static void at91_periphclk_reset(void) +{ + unsigned long reg; + int i; + + reg = at91_sys_read(AT91_PMC_PCSR); + + for (i = 0; i < ARRAY_SIZE(clock_list); i++) { + struct clk *clk = clock_list[i]; + + if (clk->mode != pmc_periph_mode) + continue; + + if (clk->users > 0) + reg &= ~clk->pmc_mask; + } + + at91_sys_write(AT91_PMC_PCDR, reg); +} + int __init at91_clock_init(unsigned long main_clock) { unsigned tmp, freq, mckr; @@ -626,7 +697,6 @@ int __init at91_clock_init(unsigned long main_clock) */ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M; pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP)); at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP); at91_sys_write(AT91_CKGR_PLLBR, 0); at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP); @@ -640,11 +710,13 @@ int __init at91_clock_init(unsigned long main_clock) */ mckr = at91_sys_read(AT91_PMC_MCKR); mck.parent = clock_list[mckr & AT91_PMC_CSS]; - mck.parent->users++; freq = mck.parent->rate_hz; freq /= (1 << ((mckr >> 2) & 3)); /* prescale */ mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */ + /* MCK and CPU clock are "always on" */ + clk_enable(&mck); + printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n", freq / 1000000, (unsigned) mck.rate_hz / 1000000, (unsigned) main_clock / 1000000, @@ -663,19 +735,28 @@ int __init at91_clock_init(unsigned long main_clock) continue; pckr = at91_sys_read(AT91_PMC_PCKR(clk->id)); - parent = clock_list[pckr & 3]; + parent = clock_list[pckr & AT91_PMC_CSS]; clk->parent = parent; clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3)); + + if (clk->users == 0) { + /* not being used, so switch it off */ + at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); + } } #else - /* disable unused clocks */ + /* disable all programmable clocks */ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3); -#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */ +#endif - /* FIXME several unused clocks may still be active... provide - * a CONFIG option to turn off all unused clocks at some point - * before driver init starts. - */ + /* enable the PIO clocks */ + clk_enable(&pioA_clk); + clk_enable(&pioB_clk); + clk_enable(&pioC_clk); + clk_enable(&pioD_clk); + + /* disable all other unused peripheral clocks */ + at91_periphclk_reset(); return 0; } -- cgit v1.2.3 From 3095faf5295f2da9118469c925d2cfb7775ad287 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 13:30:58 +0100 Subject: [ARM] 3572/1: netX: framebuffer driver for Hilscher netX Patch from Sascha Hauer This patch adds framebuffer support for Hilscher's netX network processors. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/fb.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-netx/fb.h | 24 ++++++++++ 2 files changed, 138 insertions(+) create mode 100644 arch/arm/mach-netx/fb.c create mode 100644 arch/arm/mach-netx/fb.h (limited to 'arch') diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c new file mode 100644 index 000000000000..e169b683e4de --- /dev/null +++ b/arch/arm/mach-netx/fb.c @@ -0,0 +1,114 @@ +/* + * arch/arm/mach-netx/fb.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include + +struct clk {}; + +static struct clk fb_clk; + +static struct clcd_panel *netx_panel; + +void netx_clcd_enable(struct clcd_fb *fb) +{ +} + +int netx_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = netx_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = 1024*1024; + + return 0; +} + +int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void netx_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +void clk_disable(struct clk *clk) +{ +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + return 0; +} + +int clk_enable(struct clk *clk) +{ + return 0; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + return &fb_clk; +} + +void clk_put(struct clk *clk) +{ +} + +static struct amba_device fb_device = { + .dev = { + .bus_id = "fb", + .coherent_dma_mask = ~0, + }, + .res = { + .start = 0x00104000, + .end = 0x00104fff, + .flags = IORESOURCE_MEM, + }, + .irq = { NETX_IRQ_LCD, NO_IRQ }, + .periphid = 0x10112400, +}; + +int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) +{ + netx_panel = panel; + fb_device.dev.platform_data = board; + return amba_device_register(&fb_device, &iomem_resource); +} diff --git a/arch/arm/mach-netx/fb.h b/arch/arm/mach-netx/fb.h new file mode 100644 index 000000000000..4919cf33a5f3 --- /dev/null +++ b/arch/arm/mach-netx/fb.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-netx/fb.h + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +void netx_clcd_enable(struct clcd_fb *fb); +int netx_clcd_setup(struct clcd_fb *fb); +int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma); +void netx_clcd_remove(struct clcd_fb *fb); +int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel); -- cgit v1.2.3 From 963151f2471d0e6475d8b2d3a005417aec1766f7 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:23:41 +0100 Subject: [ARM] 3579/1: AT91RM9200 Timer simplification Patch from Andrew Victor Use a global variable 'last_crtr' to store the time of the last timer tick instead of the ST_RTAR register. It's faster, frees up the ST_RTAR register for other uses, and hopefully makes the code more understandable. [Patch from Peter Menzebach] Also add the SA_TIMER flag to Timer IRQ. (It seems to be required for the realtime preempt patch). Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/time.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c index 7ffcf443b99f..36798a8d532a 100644 --- a/arch/arm/mach-at91rm9200/time.c +++ b/arch/arm/mach-at91rm9200/time.c @@ -31,6 +31,8 @@ #include #include +static unsigned long last_crtr; + /* * The ST_CRTR is updated asynchronously to the master clock. It is therefore * necessary to read it twice (with the same value) to ensure accuracy. @@ -56,7 +58,7 @@ static unsigned long at91rm9200_gettimeoffset(void) { unsigned long elapsed; - elapsed = (read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV; + elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV; return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; } @@ -66,15 +68,12 @@ static unsigned long at91rm9200_gettimeoffset(void) */ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - unsigned long rtar; - if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */ write_seqlock(&xtime_lock); - while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) { + while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) { timer_tick(regs); - rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV; - at91_sys_write(AT91_ST_RTAR, rtar); + last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV; } write_sequnlock(&xtime_lock); @@ -87,7 +86,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_r static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", - .flags = SA_SHIRQ | SA_INTERRUPT, + .flags = SA_SHIRQ | SA_INTERRUPT | SA_TIMER, .handler = at91rm9200_timer_interrupt }; -- cgit v1.2.3 From 2a6f9902c6a799a9c0218b37e39b75690c3b9a70 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:26:50 +0100 Subject: [ARM] 3580/1: AT91RM9200 Timer suspend/resume support Patch from Andrew Victor Added suspend/resume support for the AT91RM9200 timer. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/time.c | 44 ++++++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c index 36798a8d532a..fc2d7d5e4637 100644 --- a/arch/arm/mach-at91rm9200/time.c +++ b/arch/arm/mach-at91rm9200/time.c @@ -90,6 +90,20 @@ static struct irqaction at91rm9200_timer_irq = { .handler = at91rm9200_timer_interrupt }; +void at91rm9200_timer_reset(void) +{ + last_crtr = 0; + + /* Real time counter incremented every 30.51758 microseconds */ + at91_sys_write(AT91_ST_RTMR, 1); + + /* Set Period Interval timer */ + at91_sys_write(AT91_ST_PIMR, LATCH); + + /* Enable Period Interval Timer interrupt */ + at91_sys_write(AT91_ST_IER, AT91_ST_PITS); +} + /* * Set up timer interrupt. */ @@ -99,28 +113,30 @@ void __init at91rm9200_timer_init(void) at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */ - /* - * Make IRQs happen for the system timer. - */ + /* Make IRQs happen for the system timer */ setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); - /* Set initial alarm to 0 */ - at91_sys_write(AT91_ST_RTAR, 0); - - /* Real time counter incremented every 30.51758 microseconds */ - at91_sys_write(AT91_ST_RTMR, 1); - - /* Set Period Interval timer */ - at91_sys_write(AT91_ST_PIMR, LATCH); - /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */ tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE; - /* Enable Period Interval Timer interrupt */ - at91_sys_write(AT91_ST_IER, AT91_ST_PITS); + /* Initialize and enable the timer interrupt */ + at91rm9200_timer_reset(); +} + +#ifdef CONFIG_PM +static void at91rm9200_timer_suspend(void) +{ + /* disable Period Interval Timer interrupt */ + at91_sys_write(AT91_ST_IDR, AT91_ST_PITS); } +#else +#define at91rm9200_timer_suspend NULL +#endif struct sys_timer at91rm9200_timer = { .init = at91rm9200_timer_init, .offset = at91rm9200_gettimeoffset, + .suspend = at91rm9200_timer_suspend, + .resume = at91rm9200_timer_reset, }; + -- cgit v1.2.3 From 10e8e1fb758eed5cfb0cae1b770f842624851e7b Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:26:51 +0100 Subject: [ARM] 3581/1: AT91RM9200 Internal SRAM Patch from Andrew Victor This patch maps the AT91RM9200's internal SRAM into the virtual memory address space - just below the internal peripheral registers. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/common.c | 6 ++++++ include/asm-arm/arch-at91rm9200/hardware.h | 5 ++++- include/asm-arm/arch-at91rm9200/vmalloc.h | 2 +- 3 files changed, 11 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c index 3848fd2d5596..40d29a73b5c5 100644 --- a/arch/arm/mach-at91rm9200/common.c +++ b/arch/arm/mach-at91rm9200/common.c @@ -17,6 +17,7 @@ #include #include +#include "generic.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { @@ -94,6 +95,11 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { .pfn = __phys_to_pfn(AT91_BASE_TCB0), .length = SZ_16K, .type = MT_DEVICE, + }, { + .virtual = AT91_SRAM_VIRT_BASE, + .pfn = __phys_to_pfn(AT91_SRAM_BASE), + .length = AT91_SRAM_SIZE, + .type = MT_DEVICE, }, }; diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 59e6f44d3a0d..87f40df57140 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -50,9 +50,12 @@ #define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) /* Internal SRAM */ -#define AT91_BASE_SRAM 0x00200000 /* Internal SRAM base address */ +#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ #define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ + /* Internal SRAM is mapped below the IO devices */ +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) + /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h index 34d9718feb90..4c367eb57f47 100644 --- a/include/asm-arm/arch-at91rm9200/vmalloc.h +++ b/include/asm-arm/arch-at91rm9200/vmalloc.h @@ -21,6 +21,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (AT91_IO_VIRT_BASE & PGDIR_MASK) +#define VMALLOC_END (AT91_SRAM_VIRT_BASE & PGDIR_MASK) #endif -- cgit v1.2.3 From 37f2e4bc120bd784e7f69f961233e1c16b74d170 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:26:52 +0100 Subject: [ARM] 3582/1: AT91RM9200 IRQ trigger types Patch from Andrew Victor The AIC interrupt controller's set_irq_type() can also be used for internal interrupts. IRQT_LOW and IRQT_FALLING are the only options not supported for the internal interrupts. [Original patch from Karl Olsen] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/irq.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index cb62bc83a1dd..cc545b2c4388 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -92,10 +92,6 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type) { unsigned int smr, srctype; - /* change triggering only for FIQ and external IRQ0..IRQ6 */ - if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ)) - return -EINVAL; - switch (type) { case IRQT_HIGH: srctype = AT91_AIC_SRCTYPE_HIGH; @@ -104,9 +100,13 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQT_LOW: + if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + return -EINVAL; srctype = AT91_AIC_SRCTYPE_LOW; break; case IRQT_FALLING: + if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + return -EINVAL; srctype = AT91_AIC_SRCTYPE_FALLING; break; default: -- cgit v1.2.3 From 683c66bf75ce277b90d658da0c1a0bf1a55cce4c Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:26:53 +0100 Subject: [ARM] 3583/1: AT91RM9200 IRQ suspend/resume support Patch from Andrew Victor Added suspend/resume/set_wake support for the AT91RM9200's AIC interrupt controller. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/irq.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index cc545b2c4388..70f4d7ac1533 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -118,11 +118,47 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type) return 0; } +#ifdef CONFIG_PM + +static u32 wakeups; +static u32 backups; + +static int at91rm9200_irq_set_wake(unsigned irq, unsigned value) +{ + if (unlikely(irq >= 32)) + return -EINVAL; + + if (value) + wakeups |= (1 << irq); + else + wakeups &= ~(1 << irq); + + return 0; +} + +void at91_irq_suspend(void) +{ + backups = at91_sys_read(AT91_AIC_IMR); + at91_sys_write(AT91_AIC_IDCR, backups); + at91_sys_write(AT91_AIC_IECR, wakeups); +} + +void at91_irq_resume(void) +{ + at91_sys_write(AT91_AIC_IDCR, wakeups); + at91_sys_write(AT91_AIC_IECR, backups); +} + +#else +#define at91rm9200_irq_set_wake NULL +#endif + static struct irqchip at91rm9200_irq_chip = { .ack = at91rm9200_mask_irq, .mask = at91rm9200_mask_irq, .unmask = at91rm9200_unmask_irq, .set_type = at91rm9200_irq_type, + .set_wake = at91rm9200_irq_set_wake, }; /* -- cgit v1.2.3 From 814138ffa488824393d2f49f2720dcd197a7d4cf Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 15:26:54 +0100 Subject: [ARM] 3584/1: AT91RM9200 GPIO suspend/resume support Patch from Andrew Victor This patch adds suspend/resume/set_wake support for the AT91RM9200's GPIO interrupts. Original patch from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/gpio.c | 87 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 5ab46274e1a3..3430ea054662 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -213,6 +213,84 @@ EXPORT_SYMBOL(at91_get_gpio_value); /*--------------------------------------------------------------------------*/ +#ifdef CONFIG_PM + +static u32 wakeups[BGA_GPIO_BANKS]; +static u32 backups[BGA_GPIO_BANKS]; + +static int gpio_irq_set_wake(unsigned pin, unsigned state) +{ + unsigned mask = pin_to_mask(pin); + + pin -= PIN_BASE; + pin /= 32; + + if (unlikely(pin >= BGA_GPIO_BANKS)) + return -EINVAL; + + if (state) + wakeups[pin] |= mask; + else + wakeups[pin] &= ~mask; + + return 0; +} + +void at91_gpio_suspend(void) +{ + int i; + + for (i = 0; i < BGA_GPIO_BANKS; i++) { + u32 pio = pio_controller_offset[i]; + + /* + * Note: drivers should have disabled GPIO interrupts that + * aren't supposed to be wakeup sources. + * But that is not much good on ARM..... disable_irq() does + * not update the hardware immediately, so the hardware mask + * (IMR) has the wrong value (not current, too much is + * permitted). + * + * Our workaround is to disable all non-wakeup IRQs ... + * which is exactly what correct drivers asked for in the + * first place! + */ + backups[i] = at91_sys_read(pio + PIO_IMR); + at91_sys_write(pio_controller_offset[i] + PIO_IDR, backups[i]); + at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]); + + if (!wakeups[i]) { + disable_irq_wake(AT91_ID_PIOA + i); + at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i)); + } else { + enable_irq_wake(AT91_ID_PIOA + i); +#ifdef CONFIG_PM_DEBUG + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); +#endif + } + } +} + +void at91_gpio_resume(void) +{ + int i; + + for (i = 0; i < BGA_GPIO_BANKS; i++) { + at91_sys_write(pio_controller_offset[i] + PIO_IDR, wakeups[i]); + at91_sys_write(pio_controller_offset[i] + PIO_IER, backups[i]); + } + + at91_sys_write(AT91_PMC_PCER, + (1 << AT91_ID_PIOA) + | (1 << AT91_ID_PIOB) + | (1 << AT91_ID_PIOC) + | (1 << AT91_ID_PIOD)); +} + +#else +#define gpio_irq_set_wake NULL +#endif + /* Several AIC controller irqs are dispatched through this GPIO handler. * To use any AT91_PIN_* as an externally triggered IRQ, first call @@ -252,6 +330,7 @@ static struct irqchip gpio_irqchip = { .mask = gpio_irq_mask, .unmask = gpio_irq_unmask, .set_type = gpio_irq_type, + .set_wake = gpio_irq_set_wake, }; static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs) @@ -266,6 +345,7 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs /* temporarily mask (level sensitive) parent IRQ */ desc->chip->ack(irq); for (;;) { + /* reading ISR acks the pending (edge triggered) GPIO interrupt */ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); if (!isr) break; @@ -315,15 +395,16 @@ void __init at91_gpio_irq_setup(unsigned banks) set_irq_chipdata(id, controller); for (i = 0; i < 32; i++, pin++) { + /* + * Can use the "simple" and not "edge" handler since it's + * shorter, and the AIC handles interupts sanely. + */ set_irq_chip(pin, &gpio_irqchip); set_irq_handler(pin, do_simple_IRQ); set_irq_flags(pin, IRQF_VALID); } set_irq_chained_handler(id, gpio_irq_handler); - - /* enable the PIO peripheral clock */ - at91_sys_write(AT91_PMC_PCER, 1 << id); } pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks); } -- cgit v1.2.3 From bb6d8c8828123e01e2ae6c9d9c4870477889fd94 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:27:53 +0100 Subject: [ARM] 3567/2: arm: base support for Hilscher netX Patch from Sascha Hauer This patch adds the base support for Hilscher's netX network processors. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/Kconfig | 8 ++ arch/arm/Makefile | 1 + arch/arm/mach-netx/Makefile | 11 ++ arch/arm/mach-netx/Makefile.boot | 2 + arch/arm/mach-netx/generic.c | 193 ++++++++++++++++++++++++++++++++ arch/arm/mach-netx/generic.h | 24 ++++ arch/arm/mach-netx/time.c | 88 +++++++++++++++ arch/arm/mm/Kconfig | 4 +- include/asm-arm/arch-netx/debug-macro.S | 38 +++++++ include/asm-arm/arch-netx/dma.h | 21 ++++ include/asm-arm/arch-netx/entry-macro.S | 35 ++++++ include/asm-arm/arch-netx/hardware.h | 39 +++++++ include/asm-arm/arch-netx/io.h | 29 +++++ include/asm-arm/arch-netx/irqs.h | 70 ++++++++++++ include/asm-arm/arch-netx/memory.h | 36 ++++++ include/asm-arm/arch-netx/param.h | 18 +++ include/asm-arm/arch-netx/system.h | 38 +++++++ include/asm-arm/arch-netx/timex.h | 20 ++++ include/asm-arm/arch-netx/uncompress.h | 76 +++++++++++++ include/asm-arm/arch-netx/vmalloc.h | 19 ++++ 20 files changed, 768 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-netx/Makefile create mode 100644 arch/arm/mach-netx/Makefile.boot create mode 100644 arch/arm/mach-netx/generic.c create mode 100644 arch/arm/mach-netx/generic.h create mode 100644 arch/arm/mach-netx/time.c create mode 100644 include/asm-arm/arch-netx/debug-macro.S create mode 100644 include/asm-arm/arch-netx/dma.h create mode 100644 include/asm-arm/arch-netx/entry-macro.S create mode 100644 include/asm-arm/arch-netx/hardware.h create mode 100644 include/asm-arm/arch-netx/io.h create mode 100644 include/asm-arm/arch-netx/irqs.h create mode 100644 include/asm-arm/arch-netx/memory.h create mode 100644 include/asm-arm/arch-netx/param.h create mode 100644 include/asm-arm/arch-netx/system.h create mode 100644 include/asm-arm/arch-netx/timex.h create mode 100644 include/asm-arm/arch-netx/uncompress.h create mode 100644 include/asm-arm/arch-netx/vmalloc.h (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f47cf9af3bc8..dfb97fe045d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -275,6 +275,12 @@ config ARCH_PNX4008 help This enables support for Philips PNX4008 mobile platform. +config ARCH_NETX + bool "Hilscher NetX based" + select ARM_VIC + help + This enables support for systems based on the Hilscher NetX Soc + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -319,6 +325,8 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-at91rm9200/Kconfig" +source "arch/arm/mach-netx/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6c97aa70d3bc..282b14e2f464 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -117,6 +117,7 @@ endif machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_PNX4008) := pnx4008 + machine-$(CONFIG_ARCH_NETX) := netx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile new file mode 100644 index 000000000000..257d02ef66d8 --- /dev/null +++ b/arch/arm/mach-netx/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). + +# Object file lists. + +obj-y += time.o generic.o + diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot new file mode 100644 index 000000000000..b81cf6aff0ac --- /dev/null +++ b/arch/arm/mach-netx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x80008000 + diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c new file mode 100644 index 000000000000..af0b13534cfd --- /dev/null +++ b/arch/arm/mach-netx/generic.c @@ -0,0 +1,193 @@ +/* + * arch/arm/mach-netx/generic.c + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct map_desc netx_io_desc[] __initdata = { + { + .virtual = NETX_IO_VIRT, + .pfn = __phys_to_pfn(NETX_IO_PHYS), + .length = NETX_IO_SIZE, + .type = MT_DEVICE + } +}; + +void __init netx_map_io(void) +{ + iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc)); +} + +static struct resource netx_rtc_resources[] = { + [0] = { + .start = 0x00101200, + .end = 0x00101220, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device netx_rtc_device = { + .name = "netx-rtc", + .id = 0, + .num_resources = ARRAY_SIZE(netx_rtc_resources), + .resource = netx_rtc_resources, +}; + +static struct platform_device *devices[] __initdata = { + &netx_rtc_device, +}; + +#if 0 +#define DEBUG_IRQ(fmt...) printk(fmt) +#else +#define DEBUG_IRQ(fmt...) while (0) {} +#endif + +static void +netx_hif_demux_handler(unsigned int irq_unused, struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned int irq = NETX_IRQ_HIF_CHAINED(0); + unsigned int stat; + + stat = ((readl(NETX_DPMAS_INT_EN) & + readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f; + + desc = irq_desc + NETX_IRQ_HIF_CHAINED(0); + + while (stat) { + if (stat & 1) { + DEBUG_IRQ("handling irq %d\n", irq); + desc_handle_irq(irq, desc, regs); + } + irq++; + desc++; + stat >>= 1; + } +} + +static int +netx_hif_irq_type(unsigned int _irq, unsigned int type) +{ + unsigned int val, irq; + + val = readl(NETX_DPMAS_IF_CONF1); + + irq = _irq - NETX_IRQ_HIF_CHAINED(0); + + if (type & __IRQT_RISEDGE) { + DEBUG_IRQ("rising edges\n"); + val |= (1 << 26) << irq; + } + if (type & __IRQT_FALEDGE) { + DEBUG_IRQ("falling edges\n"); + val &= ~((1 << 26) << irq); + } + if (type & __IRQT_LOWLVL) { + DEBUG_IRQ("low level\n"); + val &= ~((1 << 26) << irq); + } + if (type & __IRQT_HIGHLVL) { + DEBUG_IRQ("high level\n"); + val |= (1 << 26) << irq; + } + + writel(val, NETX_DPMAS_IF_CONF1); + + return 0; +} + +static void +netx_hif_ack_irq(unsigned int _irq) +{ + unsigned int val, irq; + + irq = _irq - NETX_IRQ_HIF_CHAINED(0); + writel((1 << 24) << irq, NETX_DPMAS_INT_STAT); + + val = readl(NETX_DPMAS_INT_EN); + val &= ~((1 << 24) << irq); + writel(val, NETX_DPMAS_INT_EN); + + DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); +} + +static void +netx_hif_mask_irq(unsigned int _irq) +{ + unsigned int val, irq; + + irq = _irq - NETX_IRQ_HIF_CHAINED(0); + val = readl(NETX_DPMAS_INT_EN); + val &= ~((1 << 24) << irq); + writel(val, NETX_DPMAS_INT_EN); + DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); +} + +static void +netx_hif_unmask_irq(unsigned int _irq) +{ + unsigned int val, irq; + + irq = _irq - NETX_IRQ_HIF_CHAINED(0); + val = readl(NETX_DPMAS_INT_EN); + val |= (1 << 24) << irq; + writel(val, NETX_DPMAS_INT_EN); + DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq); +} + +static struct irqchip netx_hif_chip = { + .ack = netx_hif_ack_irq, + .mask = netx_hif_mask_irq, + .unmask = netx_hif_unmask_irq, + .set_type = netx_hif_irq_type, +}; + +void __init netx_init_irq(void) +{ + int irq; + + vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0); + + for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { + set_irq_chip(irq, &netx_hif_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN); + set_irq_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler); +} + +static int __init netx_init(void) +{ + return platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +subsys_initcall(netx_init); + diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h new file mode 100644 index 000000000000..ede2d35341c3 --- /dev/null +++ b/arch/arm/mach-netx/generic.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-netx/generic.h + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +extern void __init netx_map_io(void); +extern void __init netx_init_irq(void); + +struct sys_timer; +extern struct sys_timer netx_timer; diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c new file mode 100644 index 000000000000..edfbdf40c600 --- /dev/null +++ b/arch/arm/mach-netx/time.c @@ -0,0 +1,88 @@ +/* + * arch/arm/mach-netx/time.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include +#include + +/* + * Returns number of us since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + */ +static unsigned long netx_gettimeoffset(void) +{ + return readl(NETX_GPIO_COUNTER_CURRENT(0)) / 100; +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t +netx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + timer_tick(regs); + write_sequnlock(&xtime_lock); + + /* acknowledge interrupt */ + writel(COUNTER_BIT(0), NETX_GPIO_IRQ); + + return IRQ_HANDLED; +} + + +static struct irqaction netx_timer_irq = { + .name = "NetX Timer Tick", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = netx_timer_interrupt, +}; + +/* + * Set up timer interrupt + */ +static void __init netx_timer_init(void) +{ + /* disable timer initially */ + writel(0, NETX_GPIO_COUNTER_CTRL(0)); + + /* Reset the timer value to zero */ + writel(0, NETX_GPIO_COUNTER_CURRENT(0)); + + writel(LATCH, NETX_GPIO_COUNTER_MAX(0)); + + /* acknowledge interrupt */ + writel(COUNTER_BIT(0), NETX_GPIO_IRQ); + + /* Enable the interrupt in the specific timer register and start timer */ + writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE); + writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN, + NETX_GPIO_COUNTER_CTRL(0)); + + setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq); +} + +struct sys_timer netx_timer = { + .init = netx_timer_init, + .offset = netx_gettimeoffset, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 1ff2f073a55d..4221d054a1e9 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -121,8 +121,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_CACHE_VIVT diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S new file mode 100644 index 000000000000..a940d0e80cb2 --- /dev/null +++ b/include/asm-arm/arch-netx/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-netx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include "hardware.h" + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x00100000 @ physical + movne \rx, #io_p2v(0x00100000) @ virtual + orr \rx, \rx, #0x00000a00 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1002b + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] + tst \rd, #(1 << 3) + bne 1001b + .endm diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h new file mode 100644 index 000000000000..4eda5feed81c --- /dev/null +++ b/include/asm-arm/arch-netx/dma.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-netx/dma.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define MAX_DMA_CHANNELS 0 +#define MAX_DMA_ADDRESS ~0 diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S new file mode 100644 index 000000000000..658df4d60ff3 --- /dev/null +++ b/include/asm-arm/arch-netx/entry-macro.S @@ -0,0 +1,35 @@ +/* + * include/asm-arm/arch-netx/entry-macro.S + * + * Low-level IRQ helper macros for Hilscher netX based platforms + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov \base, #io_p2v(0x00100000) + add \base, \base, #0x000ff000 + + ldr \irqstat, [\base, #0] + clz \irqnr, \irqstat + rsb \irqnr, \irqnr, #31 + cmp \irqstat, #0 + .endm + diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h new file mode 100644 index 000000000000..7786c45455cd --- /dev/null +++ b/include/asm-arm/arch-netx/hardware.h @@ -0,0 +1,39 @@ +/* + * include/asm-arm/arch-netx/hardware.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#define NETX_IO_PHYS 0x00100000 +#define NETX_IO_VIRT 0xe0000000 +#define NETX_IO_SIZE 0x00100000 + +#define SRAM_INTERNAL_PHYS_0 0x00000 +#define SRAM_INTERNAL_PHYS_1 0x08000 +#define SRAM_INTERNAL_PHYS_2 0x10000 +#define SRAM_INTERNAL_PHYS_3 0x18000 +#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) + +#define XPEC_MEM_SIZE 0x4000 +#define XMAC_MEM_SIZE 0x1000 +#define SRAM_MEM_SIZE 0x8000 + +#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) +#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) + +#endif diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h new file mode 100644 index 000000000000..81b7bc47747e --- /dev/null +++ b/include/asm-arm/arch-netx/io.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/arch-netx/io.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h new file mode 100644 index 000000000000..a487dc6e2661 --- /dev/null +++ b/include/asm-arm/arch-netx/irqs.h @@ -0,0 +1,70 @@ +/* + * include/asm-arm/arch-netx/irqs.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define NETX_IRQ_VIC_START 0 +#define NETX_IRQ_SOFTINT 0 +#define NETX_IRQ_TIMER0 1 +#define NETX_IRQ_TIMER1 2 +#define NETX_IRQ_TIMER2 3 +#define NETX_IRQ_SYSTIME_NS 4 +#define NETX_IRQ_SYSTIME_S 5 +#define NETX_IRQ_GPIO_15 6 +#define NETX_IRQ_WATCHDOG 7 +#define NETX_IRQ_UART0 8 +#define NETX_IRQ_UART1 9 +#define NETX_IRQ_UART2 10 +#define NETX_IRQ_USB 11 +#define NETX_IRQ_SPI 12 +#define NETX_IRQ_I2C 13 +#define NETX_IRQ_LCD 14 +#define NETX_IRQ_HIF 15 +#define NETX_IRQ_GPIO_0_14 16 +#define NETX_IRQ_XPEC0 17 +#define NETX_IRQ_XPEC1 18 +#define NETX_IRQ_XPEC2 19 +#define NETX_IRQ_XPEC3 20 +#define NETX_IRQ_XPEC(no) (17 + (no)) +#define NETX_IRQ_MSYNC0 21 +#define NETX_IRQ_MSYNC1 22 +#define NETX_IRQ_MSYNC2 23 +#define NETX_IRQ_MSYNC3 24 +#define NETX_IRQ_IRQ_PHY 25 +#define NETX_IRQ_ISO_AREA 26 +/* int 27 is reserved */ +/* int 28 is reserved */ +#define NETX_IRQ_TIMER3 29 +#define NETX_IRQ_TIMER4 30 +/* int 31 is reserved */ + +#define NETX_IRQS 32 + +/* for multiplexed irqs on gpio 0..14 */ +#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) +#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) + +/* Host interface interrupts */ +#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) +#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) +#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) +#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) +#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) +#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) +#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) + +#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h new file mode 100644 index 000000000000..6d8d2df3e99d --- /dev/null +++ b/include/asm-arm/arch-netx/memory.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-netx/memory.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x80000000) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif + diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h new file mode 100644 index 000000000000..7a80c26178a8 --- /dev/null +++ b/include/asm-arm/arch-netx/param.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/arch-netx/param.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/include/asm-arm/arch-netx/system.h b/include/asm-arm/arch-netx/system.h new file mode 100644 index 000000000000..52adf368d765 --- /dev/null +++ b/include/asm-arm/arch-netx/system.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-netx/system.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include +#include "netx-regs.h" + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, + NETX_SYSTEM_RES_CR); +} + +#endif + diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h new file mode 100644 index 000000000000..7fdb42da0b40 --- /dev/null +++ b/include/asm-arm/arch-netx/timex.h @@ -0,0 +1,20 @@ +/* + * include/asm-arm/arch-netx/timex.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE 100000000 diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h new file mode 100644 index 000000000000..f89434547102 --- /dev/null +++ b/include/asm-arm/arch-netx/uncompress.h @@ -0,0 +1,76 @@ +/* + * include/asm-arm/arch-netx/uncompress.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ + +#define REG(x) (*(volatile unsigned long *)(x)) + +#define UART1_BASE 0x100a00 +#define UART2_BASE 0x100a80 + +#define UART_DR 0x0 + +#define UART_CR 0x14 +#define CR_UART_EN (1<<0) + +#define UART_FR 0x18 +#define FR_BUSY (1<<3) +#define FR_TXFF (1<<5) + +static void putc(char c) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_TXFF); + REG(base + UART_DR) = c; +} + +static inline void flush(void) +{ + unsigned long base; + + if (REG(UART1_BASE + UART_CR) & CR_UART_EN) + base = UART1_BASE; + else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) + base = UART2_BASE; + else + return; + + while (REG(base + UART_FR) & FR_BUSY); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h new file mode 100644 index 000000000000..da2da5a595da --- /dev/null +++ b/include/asm-arm/arch-netx/vmalloc.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-netx/vmalloc.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) -- cgit v1.2.3 From ef70cd4d247defcd7c0f789a5a98deab0afadf53 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:28:19 +0100 Subject: [ARM] 3568/2: netX: pointer fifo driver Patch from Sascha Hauer This patch adds support for the pointer FIFOs on netX. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/Makefile | 2 +- arch/arm/mach-netx/pfifo.c | 68 +++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/pfifo.h | 54 +++++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-netx/pfifo.c create mode 100644 include/asm-arm/arch-netx/pfifo.h (limited to 'arch') diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index 257d02ef66d8..cd424083e5b9 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -7,5 +7,5 @@ # Object file lists. -obj-y += time.o generic.o +obj-y += time.o generic.o pfifo.o diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c new file mode 100644 index 000000000000..44dea61a9de4 --- /dev/null +++ b/arch/arm/mach-netx/pfifo.c @@ -0,0 +1,68 @@ +/* + * arch/arm/mach-netx/pfifo.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +static DEFINE_MUTEX(pfifo_lock); + +static unsigned int pfifo_used = 0; + +int pfifo_request(unsigned int pfifo_mask) +{ + int err = 0; + unsigned int val; + + mutex_lock(&pfifo_lock); + + if (pfifo_mask & pfifo_used) { + err = -EBUSY; + goto out; + } + + pfifo_used |= pfifo_mask; + + val = readl(NETX_PFIFO_RESET); + writel(val | pfifo_mask, NETX_PFIFO_RESET); + writel(val, NETX_PFIFO_RESET); + +out: + mutex_unlock(&pfifo_lock); + return err; +} + +void pfifo_free(unsigned int pfifo_mask) +{ + mutex_lock(&pfifo_lock); + pfifo_used &= ~pfifo_mask; + mutex_unlock(&pfifo_lock); +} + +EXPORT_SYMBOL(pfifo_push); +EXPORT_SYMBOL(pfifo_pop); +EXPORT_SYMBOL(pfifo_fill_level); +EXPORT_SYMBOL(pfifo_empty); +EXPORT_SYMBOL(pfifo_request); +EXPORT_SYMBOL(pfifo_free); diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h new file mode 100644 index 000000000000..4af2ee4a32c1 --- /dev/null +++ b/include/asm-arm/arch-netx/pfifo.h @@ -0,0 +1,54 @@ +/* + * include/asm-arm/arch-netx/pfifo.h + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef ASM_ARCH_PFIFO_H +#define ASM_ARCH_PFIFO_H + +static inline int pfifo_push(int no, unsigned int pointer) +{ + writel(pointer, NETX_PFIFO_BASE(no)); + return 0; +} + +static inline unsigned int pfifo_pop(int no) +{ + return readl(NETX_PFIFO_BASE(no)); +} + +static inline int pfifo_fill_level(int no) +{ + + return readl(NETX_PFIFO_FILL_LEVEL(no)); +} + +static inline int pfifo_full(int no) +{ + return readl(NETX_PFIFO_FULL) & (1< Date: Mon, 19 Jun 2006 15:28:20 +0100 Subject: [ARM] 3569/2: netX: driver for XMAC/XPEC engines Patch from Sascha Hauer The netX processors have generic network bitstream engines (XMAC/XPEC). This driver adds support for firmware loading and start, stop, reset commands. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/Makefile | 2 +- arch/arm/mach-netx/xc.c | 255 +++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-netx/xc.h | 42 +++++++ 3 files changed, 298 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-netx/xc.c create mode 100644 include/asm-arm/arch-netx/xc.h (limited to 'arch') diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index cd424083e5b9..b2b7dd25f218 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -7,5 +7,5 @@ # Object file lists. -obj-y += time.o generic.o pfifo.o +obj-y += time.o generic.o pfifo.o xc.o diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c new file mode 100644 index 000000000000..172a058ddd66 --- /dev/null +++ b/arch/arm/mach-netx/xc.c @@ -0,0 +1,255 @@ +/* + * arch/arm/mach-netx/xc.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include + +static DEFINE_MUTEX(xc_lock); + +static int xc_in_use = 0; + +struct fw_desc { + unsigned int ofs; + unsigned int size; + unsigned int patch_ofs; + unsigned int patch_entries; +}; + +struct fw_header { + unsigned int magic; + unsigned int type; + unsigned int version; + unsigned int reserved[5]; + struct fw_desc fw_desc[3]; +} __attribute__ ((packed)); + +int xc_stop(struct xc *x) +{ + writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS); + writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS); + writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS); + return 0; +} + +int xc_start(struct xc *x) +{ + writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS); + writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS); + writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS); + return 0; +} + +int xc_running(struct xc *x) +{ + return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC) + || (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC) + || (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ? + 0 : 1; +} + +int xc_reset(struct xc *x) +{ + writel(0, x->xpec_base + NETX_XPEC_PC_OFS); + return 0; +} + +static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size) +{ + if (adr >= NETX_PA_XMAC(x->no) && + adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE) + return 0; + + if (adr >= NETX_PA_XPEC(x->no) && + adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE) + return 0; + + dev_err(x->dev, "Illegal pointer in firmware found. aborting\n"); + + return -1; +} + +static int xc_patch(struct xc *x, void *patch, int count) +{ + unsigned int val, adr; + unsigned int *data = patch; + + int i; + for (i = 0; i < count; i++) { + adr = *data++; + val = *data++; + if (xc_check_ptr(x, adr, 4) < 0) + return -EINVAL; + + writel(val, (void __iomem *)io_p2v(adr)); + } + return 0; +} + +int xc_request_firmware(struct xc *x) +{ + int ret; + char name[16]; + const struct firmware *fw; + struct fw_header *head; + unsigned int size; + int i; + void *src; + unsigned long dst; + + sprintf(name, "xc%d.bin", x->no); + + ret = request_firmware(&fw, name, x->dev); + + if (ret < 0) { + dev_err(x->dev, "request_firmware failed\n"); + return ret; + } + + head = (struct fw_header *)fw->data; + if (head->magic != 0x4e657458) { + if (head->magic == 0x5874654e) { + dev_err(x->dev, + "firmware magic is 'XteN'. Endianess problems?\n"); + ret = -ENODEV; + goto exit_release_firmware; + } + dev_err(x->dev, "unrecognized firmware magic 0x%08x\n", + head->magic); + ret = -ENODEV; + goto exit_release_firmware; + } + + x->type = head->type; + x->version = head->version; + + ret = -EINVAL; + + for (i = 0; i < 3; i++) { + src = fw->data + head->fw_desc[i].ofs; + dst = *(unsigned int *)src; + src += sizeof (unsigned int); + size = head->fw_desc[i].size - sizeof (unsigned int); + + if (xc_check_ptr(x, dst, size)) + goto exit_release_firmware; + + memcpy((void *)io_p2v(dst), src, size); + + src = fw->data + head->fw_desc[i].patch_ofs; + size = head->fw_desc[i].patch_entries; + ret = xc_patch(x, src, size); + if (ret < 0) + goto exit_release_firmware; + } + + ret = 0; + + exit_release_firmware: + release_firmware(fw); + + return ret; +} + +struct xc *request_xc(int xcno, struct device *dev) +{ + struct xc *x = NULL; + + mutex_lock(&xc_lock); + + if (xcno > 3) + goto exit; + if (xc_in_use & (1 << xcno)) + goto exit; + + x = kmalloc(sizeof (struct xc), GFP_KERNEL); + if (!x) + goto exit; + + if (!request_mem_region + (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, dev->kobj.name)) + goto exit_free; + + if (!request_mem_region + (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, dev->kobj.name)) + goto exit_release_1; + + if (!request_mem_region + (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, dev->kobj.name)) + goto exit_release_2; + + x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno)); + x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno)); + x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); + if (!x->sram_base) + goto exit_release_3; + + x->irq = NETX_IRQ_XPEC(xcno); + + x->no = xcno; + x->dev = dev; + + xc_in_use |= (1 << xcno); + + goto exit; + + exit_release_3: + release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); + exit_release_2: + release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE); + exit_release_1: + release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE); + exit_free: + kfree(x); + x = NULL; + exit: + mutex_unlock(&xc_lock); + return x; +} + +void free_xc(struct xc *x) +{ + int xcno = x->no; + + mutex_lock(&xc_lock); + + iounmap(x->sram_base); + release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); + release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE); + release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE); + xc_in_use &= ~(1 << x->no); + kfree(x); + + mutex_unlock(&xc_lock); +} + +EXPORT_SYMBOL(free_xc); +EXPORT_SYMBOL(request_xc); +EXPORT_SYMBOL(xc_request_firmware); +EXPORT_SYMBOL(xc_reset); +EXPORT_SYMBOL(xc_running); +EXPORT_SYMBOL(xc_start); +EXPORT_SYMBOL(xc_stop); diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h new file mode 100644 index 000000000000..659af19512a9 --- /dev/null +++ b/include/asm-arm/arch-netx/xc.h @@ -0,0 +1,42 @@ +/* + * linux/include/asm-arm/arch-netx/xc.h + * + * Copyright (C) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_XC_H +#define __ASM_ARCH_XC_H + +struct xc { + int no; + unsigned int type; + unsigned int version; + void __iomem *xpec_base; + void __iomem *xmac_base; + void __iomem *sram_base; + int irq; + struct device *dev; +}; + +int xc_reset(struct xc *x); +int xc_stop(struct xc* x); +int xc_start(struct xc *x); +int xc_running(struct xc *x); +int xc_request_firmware(struct xc* x); +struct xc* request_xc(int xcno, struct device *dev); +void free_xc(struct xc *x); + +#endif /* __ASM_ARCH_XC_H */ -- cgit v1.2.3 From 693532dcff871543639743e9c2e2b99c492f8f8d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:29:43 +0100 Subject: [ARM] 3574/1: netX: board support for NXDKN development board Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXDKN development board. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/Kconfig | 10 +++++ arch/arm/mach-netx/Makefile | 3 ++ arch/arm/mach-netx/nxdkn.c | 103 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 116 insertions(+) create mode 100644 arch/arm/mach-netx/Kconfig create mode 100644 arch/arm/mach-netx/nxdkn.c (limited to 'arch') diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig new file mode 100644 index 000000000000..a236dd0c64f5 --- /dev/null +++ b/arch/arm/mach-netx/Kconfig @@ -0,0 +1,10 @@ +menu "NetX Implementations" + depends on ARCH_NETX + +config MACH_NXDKN + bool "Enable Hilscher nxdkn Eval Board support" + depends on ARCH_NETX + help + Board support for the Hilscher NetX Eval Board + +endmenu diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index b2b7dd25f218..c5e3b18b7989 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -9,3 +9,6 @@ obj-y += time.o generic.o pfifo.o xc.o +# Specific board support +obj-$(CONFIG_MACH_NXDKN) += nxdkn.o + diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c new file mode 100644 index 000000000000..7e26c42d1ac7 --- /dev/null +++ b/arch/arm/mach-netx/nxdkn.c @@ -0,0 +1,103 @@ +/* + * arch/arm/mach-netx/nxdkn.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" + +static struct netxeth_platform_data eth0_platform_data = { + .xcno = 0, +}; + +static struct platform_device nxdkn_eth0_device = { + .name = "netx-eth", + .id = 0, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð0_platform_data, + } +}; + +static struct netxeth_platform_data eth1_platform_data = { + .xcno = 1, +}; + +static struct platform_device nxdkn_eth1_device = { + .name = "netx-eth", + .id = 1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð1_platform_data, + } +}; + +static struct resource netx_uart0_resources[] = { + [0] = { + .start = 0x00100A00, + .end = 0x00100A3F, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (NETX_IRQ_UART0), + .end = (NETX_IRQ_UART0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device netx_uart0_device = { + .name = "netx-uart", + .id = 0, + .num_resources = ARRAY_SIZE(netx_uart0_resources), + .resource = netx_uart0_resources, +}; + +static struct platform_device *devices[] __initdata = { + &nxdkn_eth0_device, + &nxdkn_eth1_device, + &netx_uart0_device, +}; + +static void __init nxdkn_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(NXDKN, "Hilscher nxdkn") + .phys_io = 0x00100000, + .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = netx_map_io, + .init_irq = netx_init_irq, + .timer = &netx_timer, + .init_machine = nxdkn_init, +MACHINE_END -- cgit v1.2.3 From af614ba072dab2940471fec1f30bd59b8272fc6b Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:29:44 +0100 Subject: [ARM] 3575/1: netX: board support for NXDB500 development board Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXDB500 development board. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/Kconfig | 7 ++ arch/arm/mach-netx/Makefile | 2 +- arch/arm/mach-netx/nxdb500.c | 210 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 218 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-netx/nxdb500.c (limited to 'arch') diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index a236dd0c64f5..93dda3bd347b 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -7,4 +7,11 @@ config MACH_NXDKN help Board support for the Hilscher NetX Eval Board +config MACH_NXDB500 + bool "Enable Hilscher nxdb500 Eval Board support" + depends on ARCH_NETX + select ARM_AMBA + help + Board support for the Hilscher nxdb500 Eval Board + endmenu diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index c5e3b18b7989..eafb24fd0e14 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -11,4 +11,4 @@ obj-y += time.o generic.o pfifo.o xc.o # Specific board support obj-$(CONFIG_MACH_NXDKN) += nxdkn.o - +obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c new file mode 100644 index 000000000000..e4a133d62846 --- /dev/null +++ b/arch/arm/mach-netx/nxdb500.c @@ -0,0 +1,210 @@ +/* + * arch/arm/mach-netx/nxdb500.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "fb.h" + +static struct clcd_panel qvga = { + .mode = { + .name = "QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 187617, + .left_margin = 6, + .right_margin = 26, + .upper_margin = 0, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = 16, + .cntl = CNTL_LCDTFT | CNTL_BGR, + .bpp = 16, + .grayscale = 0, +}; + +static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) +{ + var->green.length = 5; + var->green.msb_right = 0; + + return clcdfb_check(fb, var); +} + +static int nxdb500_clcd_setup(struct clcd_fb *fb) +{ + unsigned int val; + + fb->fb.var.green.length = 5; + fb->fb.var.green.msb_right = 0; + + /* enable asic control */ + val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); + writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); + + writel(3, NETX_SYSTEM_IOC_CR); + + val = readl(NETX_PIO_OUTPIO); + writel(val | 1, NETX_PIO_OUTPIO); + + val = readl(NETX_PIO_OEPIO); + writel(val | 1, NETX_PIO_OEPIO); + return netx_clcd_setup(fb); +} + +static struct clcd_board clcd_data = { + .name = "netX", + .check = nxdb500_check, + .decode = clcdfb_decode, + .enable = netx_clcd_enable, + .setup = nxdb500_clcd_setup, + .mmap = netx_clcd_mmap, + .remove = netx_clcd_remove, +}; + +static struct netxeth_platform_data eth0_platform_data = { + .xcno = 0, +}; + +static struct platform_device netx_eth0_device = { + .name = "netx-eth", + .id = 0, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð0_platform_data, + } +}; + +static struct netxeth_platform_data eth1_platform_data = { + .xcno = 1, +}; + +static struct platform_device netx_eth1_device = { + .name = "netx-eth", + .id = 1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð1_platform_data, + } +}; + +static struct resource netx_uart0_resources[] = { + [0] = { + .start = 0x00100A00, + .end = 0x00100A3F, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (NETX_IRQ_UART0), + .end = (NETX_IRQ_UART0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device netx_uart0_device = { + .name = "netx-uart", + .id = 0, + .num_resources = ARRAY_SIZE(netx_uart0_resources), + .resource = netx_uart0_resources, +}; + +static struct resource netx_uart1_resources[] = { + [0] = { + .start = 0x00100A40, + .end = 0x00100A7F, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (NETX_IRQ_UART1), + .end = (NETX_IRQ_UART1), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device netx_uart1_device = { + .name = "netx-uart", + .id = 1, + .num_resources = ARRAY_SIZE(netx_uart1_resources), + .resource = netx_uart1_resources, +}; + +static struct resource netx_uart2_resources[] = { + [0] = { + .start = 0x00100A80, + .end = 0x00100ABF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (NETX_IRQ_UART2), + .end = (NETX_IRQ_UART2), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device netx_uart2_device = { + .name = "netx-uart", + .id = 2, + .num_resources = ARRAY_SIZE(netx_uart2_resources), + .resource = netx_uart2_resources, +}; + +static struct platform_device *devices[] __initdata = { + &netx_eth0_device, + &netx_eth1_device, + &netx_uart0_device, + &netx_uart1_device, + &netx_uart2_device, +}; + +static void __init nxdb500_init(void) +{ + netx_fb_init(&clcd_data, &qvga); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(NXDB500, "Hilscher nxdb500") + .phys_io = 0x00100000, + .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = netx_map_io, + .init_irq = netx_init_irq, + .timer = &netx_timer, + .init_machine = nxdb500_init, +MACHINE_END -- cgit v1.2.3 From 2697c5e1f799f201366d5fd7d25e96a21587f1a9 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:29:45 +0100 Subject: [ARM] 3576/1: netX: board support for NXEB500HMI development board Patch from Sascha Hauer This patch adds the board specific code for the Hilscher NXEB500HMI development board. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-netx/Kconfig | 7 ++ arch/arm/mach-netx/Makefile | 1 + arch/arm/mach-netx/nxeb500hmi.c | 187 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 195 insertions(+) create mode 100644 arch/arm/mach-netx/nxeb500hmi.c (limited to 'arch') diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 93dda3bd347b..3d90ef19be2b 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -14,4 +14,11 @@ config MACH_NXDB500 help Board support for the Hilscher nxdb500 Eval Board +config MACH_NXEB500HMI + bool "Enable Hilscher nxeb500hmi Eval Board support" + depends on ARCH_NETX + select ARM_AMBA + help + Board support for the Hilscher nxeb500hmi Eval Board + endmenu diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile index eafb24fd0e14..18785ff37657 100644 --- a/arch/arm/mach-netx/Makefile +++ b/arch/arm/mach-netx/Makefile @@ -12,3 +12,4 @@ obj-y += time.o generic.o pfifo.o xc.o # Specific board support obj-$(CONFIG_MACH_NXDKN) += nxdkn.o obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o +obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c new file mode 100644 index 000000000000..53e10a9849f9 --- /dev/null +++ b/arch/arm/mach-netx/nxeb500hmi.c @@ -0,0 +1,187 @@ +/* + * arch/arm/mach-netx/nxeb500hmi.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "fb.h" + +static struct clcd_panel qvga = { + .mode = { + .name = "QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 187617, + .left_margin = 6, + .right_margin = 26, + .upper_margin = 0, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = 16, + .cntl = CNTL_LCDTFT | CNTL_BGR, + .bpp = 16, + .grayscale = 0, +}; + +static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) +{ + var->green.length = 5; + var->green.msb_right = 0; + + return clcdfb_check(fb, var); +} + +static int nxeb500hmi_clcd_setup(struct clcd_fb *fb) +{ + unsigned int val; + + fb->fb.var.green.length = 5; + fb->fb.var.green.msb_right = 0; + + /* enable asic control */ + val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); + writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); + + writel(3, NETX_SYSTEM_IOC_CR); + + /* GPIO 14 is used for display enable on newer boards */ + writel(9, NETX_GPIO_CFG(14)); + + val = readl(NETX_PIO_OUTPIO); + writel(val | 1, NETX_PIO_OUTPIO); + + val = readl(NETX_PIO_OEPIO); + writel(val | 1, NETX_PIO_OEPIO); + return netx_clcd_setup(fb); +} + +static struct clcd_board clcd_data = { + .name = "netX", + .check = nxeb500hmi_check, + .decode = clcdfb_decode, + .enable = netx_clcd_enable, + .setup = nxeb500hmi_clcd_setup, + .mmap = netx_clcd_mmap, + .remove = netx_clcd_remove, +}; + +static struct netxeth_platform_data eth0_platform_data = { + .xcno = 0, +}; + +static struct platform_device netx_eth0_device = { + .name = "netx-eth", + .id = 0, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð0_platform_data, + } +}; + +static struct netxeth_platform_data eth1_platform_data = { + .xcno = 1, +}; + +static struct platform_device netx_eth1_device = { + .name = "netx-eth", + .id = 1, + .num_resources = 0, + .resource = NULL, + .dev = { + .platform_data = ð1_platform_data, + } +}; + +static struct resource netx_cf_resources[] = { + [0] = { + .start = 0x20000000, + .end = 0x25ffffff, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + }, +}; + +static struct platform_device netx_cf_device = { + .name = "netx-cf", + .id = 0, + .resource = netx_cf_resources, + .num_resources = ARRAY_SIZE(netx_cf_resources), +}; + +static struct resource netx_uart0_resources[] = { + [0] = { + .start = 0x00100A00, + .end = 0x00100A3F, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (NETX_IRQ_UART0), + .end = (NETX_IRQ_UART0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device netx_uart0_device = { + .name = "netx-uart", + .id = 0, + .num_resources = ARRAY_SIZE(netx_uart0_resources), + .resource = netx_uart0_resources, +}; + +static struct platform_device *devices[] __initdata = { + &netx_eth0_device, + &netx_eth1_device, + &netx_cf_device, + &netx_uart0_device, +}; + +static void __init nxeb500hmi_init(void) +{ + netx_fb_init(&clcd_data, &qvga); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") + .phys_io = 0x00100000, + .io_pg_offst = (io_p2v(0x00100000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = netx_map_io, + .init_irq = netx_init_irq, + .timer = &netx_timer, + .init_machine = nxeb500hmi_init, +MACHINE_END -- cgit v1.2.3 From 5e6423871772b89120c9fb356d2eabb67fea60bd Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 19 Jun 2006 15:30:21 +0100 Subject: [ARM] 3577/1: netX: Default config for netx based boards Patch from Sascha Hauer This patch adds the default config file for netx based boards. Signed-off-by: Robert Schwebel Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/configs/netx_defconfig | 926 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 926 insertions(+) create mode 100644 arch/arm/configs/netx_defconfig (limited to 'arch') diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig new file mode 100644 index 000000000000..61115a773382 --- /dev/null +++ b/arch/arm/configs/netx_defconfig @@ -0,0 +1,926 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc6 +# Tue Jun 6 15:26:53 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_NETX=y + +# +# NetX Implementations +# +CONFIG_MACH_NXDKN=y +CONFIG_MACH_NXDB500=y +CONFIG_MACH_NXEB500HMI=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_VIC=y + +# +# Bus support +# +CONFIG_ARM_AMBA=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySMX0,115200" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set +CONFIG_IP_NF_QUEUE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_PLATRAM=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_NET_NETX=y +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_NETX=y +CONFIG_SERIAL_NETX_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_NVRAM=m +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m + +# +# RTC drivers +# +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_NETX=m +# CONFIG_RTC_DRV_TEST is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y -- cgit v1.2.3 From 2e83640270b4a76a3855131953c82bbc1919e589 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 16:31:55 +0100 Subject: [ARM] 3585/1: AT91RM9200 Platform devices Patch from Andrew Victor This patch updates the platform device support for the AT91RM9200. The changes include: 1. USB Host device renamed to "at91_ohci" since the driver is also usable on the AT91SAM9261 processor. 2. Enabling multidrive on the USB Device's pullup pin should not be done for all boards. Moved into board-specific files. [Patch from David Brownell] 3. Move enabling of PCMCIA/Compact Flash pins out of the driver. 4. Added SPI device and resources. 5. Added Watchdog device and resources. [Patch from David Brownell] 6. Added UART device and resources. 7. The simple devices (watchdog, rtc, i2c) are now automatically registered and don't have to be registered separately in each board-specific file. [Patch from David Brownell] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/devices.c | 406 +++++++++++++++++++++++++++++++++++-- 1 file changed, 389 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index bfe47bd6e50c..bf753e306a3a 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -16,9 +16,15 @@ #include #include +#include #include -#include +#include +#include "generic.h" + +#define SZ_512 0x00000200 +#define SZ_256 0x00000100 +#define SZ_16 0x00000010 /* -------------------------------------------------------------------- * USB Host @@ -28,7 +34,7 @@ static u64 ohci_dmamask = 0xffffffffUL; static struct at91_usbh_data usbh_data; -static struct resource at91_usbh_resource[] = { +static struct resource at91_usbh_resources[] = { [0] = { .start = AT91_UHP_BASE, .end = AT91_UHP_BASE + SZ_1M - 1, @@ -42,15 +48,15 @@ static struct resource at91_usbh_resource[] = { }; static struct platform_device at91rm9200_usbh_device = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .id = -1, .dev = { .dma_mask = &ohci_dmamask, .coherent_dma_mask = 0xffffffff, .platform_data = &usbh_data, }, - .resource = at91_usbh_resource, - .num_resources = ARRAY_SIZE(at91_usbh_resource), + .resource = at91_usbh_resources, + .num_resources = ARRAY_SIZE(at91_usbh_resources), }; void __init at91_add_device_usbh(struct at91_usbh_data *data) @@ -74,11 +80,16 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} static struct at91_udc_data udc_data; static struct resource at91_udc_resources[] = { - { + [0] = { .start = AT91_BASE_UDP, .end = AT91_BASE_UDP + SZ_16K - 1, .flags = IORESOURCE_MEM, - } + }, + [1] = { + .start = AT91_ID_UDP, + .end = AT91_ID_UDP, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device at91rm9200_udc_device = { @@ -100,10 +111,8 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_gpio_input(data->vbus_pin, 0); at91_set_deglitch(data->vbus_pin, 1); } - if (data->pullup_pin) { + if (data->pullup_pin) at91_set_gpio_output(data->pullup_pin, 0); - at91_set_multi_drive(data->pullup_pin, 1); - } udc_data = *data; platform_device_register(&at91rm9200_udc_device); @@ -197,7 +206,7 @@ static struct at91_cf_data cf_data; static struct resource at91_cf_resources[] = { [0] = { .start = AT91_CF_BASE, - /* ties up CS4, CS5, and CS6 */ + /* ties up CS4, CS5 and CS6 */ .end = AT91_CF_BASE + (0x30000000 - 1), .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, }, @@ -231,6 +240,12 @@ void __init at91_add_device_cf(struct at91_cf_data *data) at91_set_gpio_output(data->vcc_pin, 0); at91_set_gpio_output(data->rst_pin, 0); + /* force poweron defaults for these pins ... */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */ + at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ + cf_data = *data; platform_device_register(&at91rm9200_cf_device); } @@ -319,6 +334,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) void __init at91_add_device_mmc(struct at91_mmc_data *data) {} #endif + /* -------------------------------------------------------------------- * NAND / SmartMedia * -------------------------------------------------------------------- */ @@ -399,23 +415,111 @@ void __init at91_add_device_i2c(void) {} #endif +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) +static u64 spi_dmamask = 0xffffffffUL; + +static struct resource at91_spi_resources[] = { + [0] = { + .start = AT91_BASE_SPI, + .end = AT91_BASE_SPI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SPI, + .end = AT91_ID_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_spi_device = { + .name = "at91_spi", + .id = 0, + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .resource = at91_spi_resources, + .num_resources = ARRAY_SIZE(at91_spi_resources), +}; + +static const unsigned at91_spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; + +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) +{ + int i; + unsigned long cs_pin; + + at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */ + + /* Enable SPI chip-selects */ + for (i = 0; i < nr_devices; i++) { + if (devices[i].controller_data) + cs_pin = (unsigned long) devices[i].controller_data; + else + cs_pin = at91_spi_standard_cs[devices[i].chip_select]; + +#ifdef CONFIG_SPI_AT91_MANUAL_CS + at91_set_gpio_output(cs_pin, 1); +#else + at91_set_A_periph(cs_pin, 0); +#endif + + /* pass chip-select pin to driver */ + devices[i].controller_data = (void *) cs_pin; + } + + spi_register_board_info(devices, nr_devices); + at91_clock_associate("spi0_clk", &at91rm9200_spi_device.dev, "spi"); + platform_device_register(&at91rm9200_spi_device); +} +#else +void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} +#endif + + /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91_RTC) || defined(CONFIG_AT91_RTC_MODULE) +#if defined(CONFIG_RTC_DRV_AT91) || defined(CONFIG_RTC_DRV_AT91_MODULE) static struct platform_device at91rm9200_rtc_device = { .name = "at91_rtc", .id = -1, .num_resources = 0, }; -void __init at91_add_device_rtc(void) +static void __init at91_add_device_rtc(void) { platform_device_register(&at91rm9200_rtc_device); } #else -void __init at91_add_device_rtc(void) {} +static void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_WATCHDOG) || defined(CONFIG_AT91_WATCHDOG_MODULE) +static struct platform_device at91rm9200_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91rm9200_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} #endif @@ -429,13 +533,281 @@ u8 at91_leds_timer; void __init at91_init_leds(u8 cpu_led, u8 timer_led) { - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; } - #else void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * UART + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_SERIAL_AT91) +static struct resource dbgu_resources[] = { + [0] = { + .start = AT91_VA_BASE_SYS + AT91_DBGU, + .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_SYS, + .end = AT91_ID_SYS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct at91_uart_data dbgu_data = { + .use_dma_tx = 0, + .use_dma_rx = 0, /* DBGU not capable of receive DMA */ +}; + +static struct platform_device at91rm9200_dbgu_device = { + .name = "at91_usart", + .id = 0, + .dev = { + .platform_data = &dbgu_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = dbgu_resources, + .num_resources = ARRAY_SIZE(dbgu_resources), +}; + +static inline void configure_dbgu_pins(void) +{ + at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */ +} + +static struct resource uart0_resources[] = { + [0] = { + .start = AT91_BASE_US0, + .end = AT91_BASE_US0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_US0, + .end = AT91_ID_US0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct at91_uart_data uart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91rm9200_uart0_device = { + .name = "at91_usart", + .id = 1, + .dev = { + .platform_data = &uart0_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart0_resources, + .num_resources = ARRAY_SIZE(uart0_resources), +}; + +static inline void configure_usart0_pins(void) +{ + at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ + at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ + + /* + * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); +} + +static struct resource uart1_resources[] = { + [0] = { + .start = AT91_BASE_US1, + .end = AT91_BASE_US1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_US1, + .end = AT91_ID_US1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct at91_uart_data uart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91rm9200_uart1_device = { + .name = "at91_usart", + .id = 2, + .dev = { + .platform_data = &uart1_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart1_resources, + .num_resources = ARRAY_SIZE(uart1_resources), +}; + +static inline void configure_usart1_pins(void) +{ + at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ + at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ + at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ +} + +static struct resource uart2_resources[] = { + [0] = { + .start = AT91_BASE_US2, + .end = AT91_BASE_US2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_US2, + .end = AT91_ID_US2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct at91_uart_data uart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91rm9200_uart2_device = { + .name = "at91_usart", + .id = 3, + .dev = { + .platform_data = &uart2_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart2_resources, + .num_resources = ARRAY_SIZE(uart2_resources), +}; + +static inline void configure_usart2_pins(void) +{ + at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ + at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ +} + +static struct resource uart3_resources[] = { + [0] = { + .start = AT91_BASE_US3, + .end = AT91_BASE_US3 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_US3, + .end = AT91_ID_US3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct at91_uart_data uart3_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; + +static struct platform_device at91rm9200_uart3_device = { + .name = "at91_usart", + .id = 4, + .dev = { + .platform_data = &uart3_data, + .coherent_dma_mask = 0xffffffff, + }, + .resource = uart3_resources, + .num_resources = ARRAY_SIZE(uart3_resources), +}; + +static inline void configure_usart3_pins(void) +{ + at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ + at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ +} + +struct platform_device *at91_uarts[AT91_NR_UART]; /* the UARTs to use */ +struct platform_device *at91_default_console_device; /* the serial console device */ + +void __init at91_init_serial(struct at91_uart_config *config) +{ + int i; + + /* Fill in list of supported UARTs */ + for (i = 0; i < config->nr_tty; i++) { + switch (config->tty_map[i]) { + case 0: + configure_usart0_pins(); + at91_uarts[i] = &at91rm9200_uart0_device; + at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); + break; + case 1: + configure_usart1_pins(); + at91_uarts[i] = &at91rm9200_uart1_device; + at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); + break; + case 2: + configure_usart2_pins(); + at91_uarts[i] = &at91rm9200_uart2_device; + at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); + break; + case 3: + configure_usart3_pins(); + at91_uarts[i] = &at91rm9200_uart3_device; + at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); + break; + case 4: + configure_dbgu_pins(); + at91_uarts[i] = &at91rm9200_dbgu_device; + at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); + break; + default: + continue; + } + at91_uarts[i]->id = i; /* update ID number to mapped ID */ + } + + /* Set serial console device */ + if (config->console_tty < AT91_NR_UART) + at91_default_console_device = at91_uarts[config->console_tty]; + if (!at91_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + +void __init at91_add_device_serial(void) +{ + int i; + + for (i = 0; i < AT91_NR_UART; i++) { + if (at91_uarts[i]) + platform_device_register(at91_uarts[i]); + } +} +#else +void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_add_device_serial(void) {} +#endif + + /* -------------------------------------------------------------------- */ + +/* + * These devices are always present and don't need any board-specific + * setup. + */ +static int __init at91_add_standard_devices(void) +{ + at91_add_device_rtc(); + at91_add_device_watchdog(); + return 0; +} + +arch_initcall(at91_add_standard_devices); -- cgit v1.2.3 From 466e6227e6a54d9b94b50972612fe8bf0450f786 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 17:26:23 +0100 Subject: [ARM] 3588/1: AT91RM9200 CSB337/637 board update Patch from Andrew Victor This patch updates the support for the Cogent CSB337 and CSB637 boards. The changes include: 1. Use the new at91_uart_config structure and device registration functions for the UARTs. 2. Registration of I2C and SPI platform devices. 3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs. [Patch from David Brownell] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/board-csb337.c | 43 +++++++++++++++++++-------------- arch/arm/mach-at91rm9200/board-csb637.c | 30 +++++++++++------------ 2 files changed, 39 insertions(+), 34 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index f45104ceea8f..3b9de181ae32 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -35,8 +36,8 @@ #include #include -#include #include +#include #include "generic.h" @@ -54,32 +55,24 @@ static void __init csb337_init_irq(void) * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ -#define CSB337_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -#define CSB337_SERIAL_CONSOLE 0 /* ttyS0 */ +static struct at91_uart_config __initdata csb337_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; static void __init csb337_map_io(void) { - int serial[AT91_NR_UART] = CSB337_UART_MAP; - int i; - at91rm9200_map_io(); /* Initialize clocks: 3.6864 MHz crystal */ at91_clock_init(3686400); /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - -#ifdef CONFIG_SERIAL_AT91 - at91_console_port = CSB337_SERIAL_CONSOLE; - memcpy(at91_serial_map, serial, sizeof(serial)); - - /* Register UARTs */ - for (i = 0; i < AT91_NR_UART; i++) { - if (serial[i] >= 0) - at91_register_uart(i, serial[i]); - } -#endif + at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); + + /* Setup the serial ports and console */ + at91_init_serial(&csb337_uart_config); } static struct at91_eth_data __initdata csb337_eth_data = { @@ -118,17 +111,31 @@ static struct at91_mmc_data __initdata csb337_mmc_data = { .wp_pin = AT91_PIN_PD6, }; +static struct spi_board_info csb337_spi_devices[] = { + { /* CAN controller */ + .modalias = "sak82c900", + .chip_select = 0, + .max_speed_hz = 6 * 1000 * 1000, + }, +}; + static void __init csb337_board_init(void) { + /* Serial */ + at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&csb337_eth_data); /* USB Host */ at91_add_device_usbh(&csb337_usbh_data); /* USB Device */ at91_add_device_udc(&csb337_udc_data); + /* I2C */ + at91_add_device_i2c(); /* Compact Flash */ at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */ at91_add_device_cf(&csb337_cf_data); + /* SPI */ + at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ at91_add_device_mmc(&csb337_mmc_data); } diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index f2c2d6e79bc6..2c4470d110da 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -35,8 +35,8 @@ #include #include -#include #include +#include #include "generic.h" @@ -54,14 +54,14 @@ static void __init csb637_init_irq(void) * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ -#define CSB637_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -#define CSB637_SERIAL_CONSOLE 0 /* ttyS0 */ +static struct at91_uart_config __initdata csb637_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; static void __init csb637_map_io(void) { - int serial[AT91_NR_UART] = CSB637_UART_MAP; - int i; - at91rm9200_map_io(); /* Initialize clocks: 3.6864 MHz crystal */ @@ -70,16 +70,8 @@ static void __init csb637_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); -#ifdef CONFIG_SERIAL_AT91 - at91_console_port = CSB637_SERIAL_CONSOLE; - memcpy(at91_serial_map, serial, sizeof(serial)); - - /* Register UARTs */ - for (i = 0; i < AT91_NR_UART; i++) { - if (serial[i] >= 0) - at91_register_uart(i, serial[i]); - } -#endif + /* Setup the serial ports and console */ + at91_init_serial(&csb637_uart_config); } static struct at91_eth_data __initdata csb637_eth_data = { @@ -98,12 +90,18 @@ static struct at91_udc_data __initdata csb637_udc_data = { static void __init csb637_board_init(void) { + /* Serial */ + at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&csb637_eth_data); /* USB Host */ at91_add_device_usbh(&csb637_usbh_data); /* USB Device */ at91_add_device_udc(&csb637_udc_data); + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(NULL, 0); } MACHINE_START(CSB637, "Cogent CSB637") -- cgit v1.2.3 From 067bbada4cc574eaa4fa577483ecae4012049477 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 19 Jun 2006 18:16:45 +0100 Subject: [ARM] 3589/1: AT91RM9200 DK/EK board update Patch from Andrew Victor This patch updates the support for the Atmel DK and EK boards. The changes include: 1. Use the new at91_uart_config structure and device registration functions for the UARTs. 2. Registration of I2C and SPI platform devices. 3. The USB Device pullup line is connected to reset, so multidrive needs to be enabled on the line. [Patch from David Brownell]. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/board-dk.c | 57 ++++++++++++++++++++++++++----------- arch/arm/mach-at91rm9200/board-ek.c | 47 +++++++++++++++++++----------- 2 files changed, 72 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index 2d7200ed66ed..eb02ca95be79 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -38,8 +39,8 @@ #include #include -#include #include +#include #include "generic.h" @@ -57,14 +58,14 @@ static void __init dk_init_irq(void) * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ -#define DK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -#define DK_SERIAL_CONSOLE 0 /* ttyS0 */ +static struct at91_uart_config __initdata dk_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; static void __init dk_map_io(void) { - int serial[AT91_NR_UART] = DK_UART_MAP; - int i; - at91rm9200_map_io(); /* Initialize clocks: 18.432 MHz crystal */ @@ -73,16 +74,8 @@ static void __init dk_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); -#ifdef CONFIG_SERIAL_AT91 - at91_console_port = DK_SERIAL_CONSOLE; - memcpy(at91_serial_map, serial, sizeof(serial)); - - /* Register UARTs */ - for (i = 0; i < AT91_NR_UART; i++) { - if (at91_serial_map[i] >= 0) - at91_register_uart(i, at91_serial_map[i]); - } -#endif + /* Setup the serial ports and console */ + at91_init_serial(&dk_uart_config); } static struct at91_eth_data __initdata dk_eth_data = { @@ -111,16 +104,48 @@ static struct at91_mmc_data __initdata dk_mmc_data = { .wire4 = 1, }; +static struct spi_board_info dk_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, + { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ + .modalias = "ur6hcps2", + .chip_select = 1, + .max_speed_hz = 250 * 1000, + }, + { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ + .modalias = "tlv1504", + .chip_select = 2, + .max_speed_hz = 20 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + } +#endif +}; + static void __init dk_board_init(void) { + /* Serial */ + at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&dk_eth_data); /* USB Host */ at91_add_device_usbh(&dk_usbh_data); /* USB Device */ at91_add_device_udc(&dk_udc_data); + at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* Compact Flash */ at91_add_device_cf(&dk_cf_data); + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD /* DataFlash card */ at91_set_gpio_output(AT91_PIN_PB7, 0); diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index 80d90f5135a1..4d7468e42679 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -38,8 +39,8 @@ #include #include -#include #include +#include #include "generic.h" @@ -57,14 +58,14 @@ static void __init ek_init_irq(void) * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ -#define EK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -#define EK_SERIAL_CONSOLE 0 /* ttyS0 */ +static struct at91_uart_config __initdata ek_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; static void __init ek_map_io(void) { - int serial[AT91_NR_UART] = EK_UART_MAP; - int i; - at91rm9200_map_io(); /* Initialize clocks: 18.432 MHz crystal */ @@ -73,16 +74,8 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); -#ifdef CONFIG_SERIAL_AT91 - at91_console_port = EK_SERIAL_CONSOLE; - memcpy(at91_serial_map, serial, sizeof(serial)); - - /* Register UARTs */ - for (i = 0; i < AT91_NR_UART; i++) { - if (serial[i] >= 0) - at91_register_uart(i, serial[i]); - } -#endif + /* Setup the serial ports and console */ + at91_init_serial(&ek_uart_config); } static struct at91_eth_data __initdata ek_eth_data = { @@ -106,14 +99,36 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .wp_pin = AT91_PIN_PA17, }; +static struct spi_board_info ek_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + }, +#endif +}; + static void __init ek_board_init(void) { + /* Serial */ + at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&ek_eth_data); /* USB Host */ at91_add_device_usbh(&ek_usbh_data); /* USB Device */ at91_add_device_udc(&ek_udc_data); + at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD /* DataFlash card */ at91_set_gpio_output(AT91_PIN_PB22, 0); -- cgit v1.2.3 From bf1c56a3aaa67ac74bc74e631ecc2a2673597cae Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 19 Jun 2006 18:30:04 +0100 Subject: [ARM] 3591/1: Anubis: IDE device definitions Patch from Ben Dooks Platform device definitions for the two IDE ports on the Simtec Anubis board. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/mach-s3c2410/mach-anubis.c | 50 +++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 52bf718137d4..4a92d6f92d6b 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -239,6 +239,54 @@ static struct s3c2410_platform_nand anubis_nand_info = { .select_chip = anubis_nand_select, }; +/* IDE channels */ + +static struct resource anubis_ide0_resource[] = { + { + .start = S3C2410_CS3, + .end = S3C2410_CS3 + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = S3C2410_CS3 + (1<<26), + .end = S3C2410_CS3 + (1<<26) + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_IDE0, + .end = IRQ_IDE0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device anubis_device_ide0 = { + .name = "simtec-ide", + .id = 0, + .num_resources = ARRAY_SIZE(anubis_ide0_resource), + .resource = anubis_ide0_resource, +}; + +static struct resource anubis_ide1_resource[] = { + { + .start = S3C2410_CS4, + .end = S3C2410_CS4 + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = S3C2410_CS4 + (1<<26), + .end = S3C2410_CS4 + (1<<26) + (8*32) - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_IDE0, + .end = IRQ_IDE0, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device anubis_device_ide1 = { + .name = "simtec-ide", + .id = 1, + .num_resources = ARRAY_SIZE(anubis_ide1_resource), + .resource = anubis_ide1_resource, +}; /* Standard Anubis devices */ @@ -249,6 +297,8 @@ static struct platform_device *anubis_devices[] __initdata = { &s3c_device_i2c, &s3c_device_rtc, &s3c_device_nand, + &anubis_device_ide0, + &anubis_device_ide1, }; static struct clk *anubis_clocks[] = { -- cgit v1.2.3 From 74617fb6b825ea370ae72565f7543306bc08ef6e Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 19 Jun 2006 19:57:12 +0100 Subject: [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds Patch from Richard Purdie Add functionality to allow machine specific reboot handlers on ARM. Add machine specific reboot and poweroff handlers for all PXA Zaurus models. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/kernel/process.c | 61 ++++++++++++++++++++++----------------- arch/arm/mach-pxa/corgi.c | 25 ++++++++++++++++ arch/arm/mach-pxa/poodle.c | 17 +++++++++++ arch/arm/mach-pxa/spitz.c | 25 ++++++++++++++++ arch/arm/mach-pxa/tosa.c | 25 ++++++++++++++++ include/asm-arm/arch-pxa/system.h | 1 + include/asm-arm/system.h | 3 ++ 7 files changed, 131 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 7df6e1aaa323..17c38dbf2f3c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -71,8 +72,36 @@ static int __init hlt_setup(char *__unused) __setup("nohlt", nohlt_setup); __setup("hlt", hlt_setup); +void arm_machine_restart(char mode) +{ + /* + * Clean and disable cache, and turn off interrupts + */ + cpu_proc_fin(); + + /* + * Tell the mm system that we are going to reboot - + * we may need it to insert some 1:1 mappings so that + * soft boot works. + */ + setup_mm_for_reboot(mode); + + /* + * Now call the architecture specific reboot code. + */ + arch_reset(mode); + + /* + * Whoops - the architecture was unable to reboot. + * Tell the user! + */ + mdelay(1000); + printk("Reboot failed -- System halted\n"); + while (1); +} + /* - * The following aren't currently used. + * Function pointers to optional machine specific functions */ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); @@ -80,6 +109,10 @@ EXPORT_SYMBOL(pm_idle); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); +void (*arm_pm_restart)(char str) = arm_machine_restart; +EXPORT_SYMBOL_GPL(arm_pm_restart); + + /* * This is our default idle handler. We need to disable * interrupts here to ensure we don't miss a wakeup call. @@ -151,33 +184,9 @@ void machine_power_off(void) pm_power_off(); } - void machine_restart(char * __unused) { - /* - * Clean and disable cache, and turn off interrupts - */ - cpu_proc_fin(); - - /* - * Tell the mm system that we are going to reboot - - * we may need it to insert some 1:1 mappings so that - * soft boot works. - */ - setup_mm_for_reboot(reboot_mode); - - /* - * Now call the architecture specific reboot code. - */ - arch_reset(reboot_mode); - - /* - * Whoops - the architecture was unable to reboot. - * Tell the user! - */ - mdelay(1000); - printk("Reboot failed -- System halted\n"); - while (1); + arm_pm_restart(reboot_mode); } void __show_regs(struct pt_regs *regs) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index d6d726036361..bf6648a83901 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -26,6 +27,7 @@ #include #include #include +#include #include #include @@ -310,8 +312,31 @@ static struct platform_device *devices[] __initdata = { &corgiled_device, }; +static void corgi_poweroff(void) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + if (!machine_is_corgi()) + /* Green LED off tells the bootloader to halt */ + reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); + arm_machine_restart('h'); +} + +static void corgi_restart(char mode) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + if (!machine_is_corgi()) + /* Green LED on tells the bootloader to reboot */ + set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN); + arm_machine_restart('h'); +} + static void __init corgi_init(void) { + pm_power_off = corgi_poweroff; + arm_pm_restart = corgi_restart; + /* setup sleep mode values */ PWER = 0x00000002; PFER = 0x00000000; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index a042473deedd..1d516d317e89 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -18,11 +18,13 @@ #include #include #include +#include #include #include #include #include +#include #include #include @@ -247,10 +249,25 @@ static struct platform_device *devices[] __initdata = { &poodle_scoop_device, }; +static void poodle_poweroff(void) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + arm_machine_restart('h'); +} + +static void poodle_restart(char mode) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + arm_machine_restart('h'); +} + static void __init poodle_init(void) { int ret = 0; + pm_power_off = poodle_poweroff; + arm_pm_restart = poodle_restart; + /* setup sleep mode values */ PWER = 0x00000002; PFER = 0x00000000; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 44bcb8097c7a..eb9937f6f5cd 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -27,6 +28,7 @@ #include #include #include +#include #include #include @@ -432,8 +434,31 @@ static struct platform_device *devices[] __initdata = { &spitzled_device, }; +static void spitz_poweroff(void) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT); + GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET); + + mdelay(1000); + arm_machine_restart('h'); +} + +static void spitz_restart(char mode) +{ + /* Bootloader magic for a reboot */ + if((MSC0 & 0xffff0000) == 0x7ff00000) + MSC0 = (MSC0 & 0xffff) | 0x7ee00000; + + spitz_poweroff(); +} + static void __init common_init(void) { + pm_power_off = spitz_poweroff; + arm_pm_restart = spitz_restart; + PMCR = 0x00; /* setup sleep mode values */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 76c0e7f0a219..afa223b9e7a2 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -19,12 +19,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include @@ -266,8 +268,31 @@ static struct platform_device *devices[] __initdata = { &tosaled_device, }; +static void tosa_poweroff(void) +{ + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); + GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); + + mdelay(1000); + arm_machine_restart('h'); +} + +static void tosa_restart(char mode) +{ + /* Bootloader magic for a reboot */ + if((MSC0 & 0xffff0000) == 0x7ff00000) + MSC0 = (MSC0 & 0xffff) | 0x7ee00000; + + tosa_poweroff(); +} + static void __init tosa_init(void) { + pm_power_off = tosa_poweroff; + arm_pm_restart = tosa_restart; + pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN); pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN); diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 840a46bfbc54..1d56a3ef89fd 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include "hardware.h" #include "pxa-regs.h" diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 7c9568d30307..e6b762b31488 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -108,6 +108,9 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +void arm_machine_restart(char mode); +extern void (*arm_pm_restart)(char str); + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For -- cgit v1.2.3 From 88660351cb6daa85baf9700f12dff3af564dc14a Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 19 Jun 2006 19:58:51 +0100 Subject: [ARM] 3561/1: Poodle: Correct the MMC/SD power control Patch from Richard Purdie Correct the Poodle power control for the MMC/SD port. Also add write protection switch support. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/poodle.c | 22 ++++++++++++++++++---- include/asm-arm/arch-pxa/poodle.h | 2 ++ 2 files changed, 20 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 1d516d317e89..234877a09dfb 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -143,7 +144,9 @@ static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)( pxa_gpio_mode(GPIO6_MMCCLK_MD); pxa_gpio_mode(GPIO8_MMCCS0_MD); pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN); + pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN); pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT); + pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT); poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250); @@ -162,12 +165,22 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; - if (( 1 << vdd) & p_d->ocr_mask) - GPSR1 = GPIO_bit(POODLE_GPIO_SD_PWR); - else - GPCR1 = GPIO_bit(POODLE_GPIO_SD_PWR); + if (( 1 << vdd) & p_d->ocr_mask) { + GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR); + mdelay(2); + GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1); + } else { + GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1); + GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR); + } +} + +static int poodle_mci_get_ro(struct device *dev) +{ + return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP); } + static void poodle_mci_exit(struct device *dev, void *data) { free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data); @@ -176,6 +189,7 @@ static void poodle_mci_exit(struct device *dev, void *data) static struct pxamci_platform_data poodle_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = poodle_mci_init, + .get_ro = poodle_mci_get_ro, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, }; diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h index 6b5ac5144e70..6079e0aa1ab9 100644 --- a/include/asm-arm/arch-pxa/poodle.h +++ b/include/asm-arm/arch-pxa/poodle.h @@ -31,6 +31,7 @@ #define POODLE_GPIO_CF_CD (14) #define POODLE_GPIO_CF_STSCHG (14) #define POODLE_GPIO_SD_PWR (33) +#define POODLE_GPIO_SD_PWR1 (3) #define POODLE_GPIO_nSD_CLK (6) #define POODLE_GPIO_nSD_WP (7) #define POODLE_GPIO_nSD_INT (8) @@ -42,6 +43,7 @@ #define POODLE_GPIO_BYPASS_ON (36) #define POODLE_GPIO_CHRG_ON (38) #define POODLE_GPIO_CHRG_FULL (16) +#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ /* PXA GPIOs */ #define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -- cgit v1.2.3 From f8703dc8cb10eca7f6fe6ef364d8e106fe07f034 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 19 Jun 2006 19:58:52 +0100 Subject: [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters Patch from Richard Purdie Abstract some machine specific parameters from the sharpsl_pm core into the machine specific drivers. This allows the core to support tosa/poodle. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/common/sharpsl_pm.c | 28 +++++++++++----------------- arch/arm/mach-pxa/corgi_pm.c | 23 ++++++++++++++++++++--- arch/arm/mach-pxa/sharpsl_pm.c | 7 +++++-- arch/arm/mach-pxa/spitz_pm.c | 15 +++++++++++++++ include/asm-arm/hardware/sharpsl_pm.h | 11 +++++++++++ 5 files changed, 62 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 3cd8c9ee4510..045e37e07330 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -49,13 +49,6 @@ #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ -#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ -#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ -#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ -#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ -#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ -#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ - /* * Prototypes */ @@ -82,12 +75,13 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); static int get_percentage(int voltage) { int i = sharpsl_pm.machinfo->bat_levels - 1; + int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; struct battery_thresh *thresh; if (sharpsl_pm.charge_mode == CHRG_ON) - thresh=sharpsl_pm.machinfo->bat_levels_acin; + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin; else - thresh=sharpsl_pm.machinfo->bat_levels_noac; + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac; while (i > 0 && (voltage > thresh[i].voltage)) i--; @@ -131,7 +125,7 @@ static void sharpsl_battery_thread(void *private_) sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); /* Corgi cannot confirm when battery fully charged so periodically kick! */ - if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) schedule_work(&toggle_charger); @@ -166,11 +160,11 @@ static void sharpsl_battery_thread(void *private_) && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - corgibl_limit_intensity(1); + sharpsl_pm.machinfo->backlight_limit(1); sharpsl_pm.flags |= SHARPSL_BL_LIMIT; } } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - corgibl_limit_intensity(0); + sharpsl_pm.machinfo->backlight_limit(0); sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; } @@ -418,7 +412,7 @@ static int sharpsl_check_battery_temp(void) val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > SHARPSL_CHARGE_ON_TEMP) + if (val > sharpsl_pm.machinfo->charge_on_temp) return -1; return 0; @@ -450,7 +444,7 @@ static int sharpsl_check_battery_voltage(void) val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); - if (val < SHARPSL_CHARGE_ON_VOLT) + if (val < sharpsl_pm.machinfo->charge_on_volt) return -1; return 0; @@ -468,7 +462,7 @@ static int sharpsl_ac_check(void) temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { + if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); return -1; } @@ -627,8 +621,8 @@ static int sharpsl_fatal_check(void) temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || - (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || + (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) return -1; return 0; } diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 7a1ab73e9e10..4c3de4008a43 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -27,6 +27,13 @@ #include #include "sharpsl.h" +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + static void corgi_charger_init(void) { pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT); @@ -195,9 +202,16 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, - .bat_levels = 40, - .bat_levels_noac = spitz_battery_levels_noac, - .bat_levels_acin = spitz_battery_levels_acin, + .backlight_limit = corgibl_limit_intensity, + .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, + .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, + .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, + .charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW, + .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT, + .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT, + .bat_levels = 40, + .bat_levels_noac = spitz_battery_levels_noac, + .bat_levels_acin = spitz_battery_levels_acin, .status_high_acin = 188, .status_low_acin = 178, .status_high_noac = 185, @@ -214,6 +228,9 @@ static int __devinit corgipm_init(void) if (!corgipm_device) return -ENOMEM; + if (!machine_is_corgi()) + corgi_pm_machinfo.batfull_irq = 1; + corgipm_device->dev.platform_data = &corgi_pm_machinfo; ret = platform_device_add(corgipm_device); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 6d402b262d8a..0f1648780c41 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -128,6 +128,9 @@ struct battery_thresh spitz_battery_levels_noac[] = { */ int sharpsl_pm_pxa_read_max1111(int channel) { + if (machine_is_tosa()) // Ugly, better move this function into another module + return 0; + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); } @@ -156,7 +159,7 @@ void sharpsl_pm_pxa_init(void) else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); } - if (!machine_is_corgi()) + if (sharpsl_pm.machinfo->batfull_irq) { /* Register interrupt handler. */ if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, SA_INTERRUPT, "CO", sharpsl_chrg_full_isr)) { @@ -174,6 +177,6 @@ void sharpsl_pm_pxa_remove(void) if (sharpsl_pm.machinfo->gpio_fatal) free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr); - if (!machine_is_corgi()) + if (sharpsl_pm.machinfo->batfull_irq) free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr); } diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 5e5bdc898482..40be833079c7 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -27,6 +27,13 @@ #include #include "sharpsl.h" +#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ +#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ +#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ +#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ +#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ +#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ + static int spitz_last_ac_status; static void spitz_charger_init(void) @@ -190,6 +197,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .gpio_batlock = SPITZ_GPIO_BAT_COVER, .gpio_acin = SPITZ_GPIO_AC_IN, .gpio_batfull = SPITZ_GPIO_CHRG_FULL, + .batfull_irq = 1, .gpio_fatal = SPITZ_GPIO_FATAL_BAT, .discharge = spitz_discharge, .discharge1 = spitz_discharge1, @@ -200,6 +208,13 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .read_devdata = spitzpm_read_devdata, .charger_wakeup = spitz_charger_wakeup, .should_wakeup = spitz_should_wakeup, + .backlight_limit = corgibl_limit_intensity, + .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, + .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, + .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, + .charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW, + .fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT, + .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT, .bat_levels = 40, .bat_levels_noac = spitz_battery_levels_noac, .bat_levels_acin = spitz_battery_levels_acin, diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/include/asm-arm/hardware/sharpsl_pm.h index 36983e5f3665..ecf15b83956f 100644 --- a/include/asm-arm/hardware/sharpsl_pm.h +++ b/include/asm-arm/hardware/sharpsl_pm.h @@ -16,6 +16,7 @@ struct sharpsl_charger_machinfo { void (*exit)(void); int gpio_acin; int gpio_batfull; + int batfull_irq; int gpio_batlock; int gpio_fatal; void (*discharge)(int); @@ -34,9 +35,19 @@ struct sharpsl_charger_machinfo { #define SHARPSL_STATUS_FATAL 7 unsigned long (*charger_wakeup)(void); int (*should_wakeup)(unsigned int resume_on_alarm); + void (*backlight_limit)(int); + int (*backlight_get_status) (void); + int charge_on_volt; + int charge_on_temp; + int charge_acin_high; + int charge_acin_low; + int fatal_acin_volt; + int fatal_noacin_volt; int bat_levels; struct battery_thresh *bat_levels_noac; struct battery_thresh *bat_levels_acin; + struct battery_thresh *bat_levels_noac_bl; + struct battery_thresh *bat_levels_acin_bl; int status_high_acin; int status_low_acin; int status_high_noac; -- cgit v1.2.3 From faed568413e89f87cd60aa8b292cc4b9996bae42 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 19 Jun 2006 20:46:05 +0100 Subject: [ARM] 3594/1: Poodle: Add touchscreen support + other updates Patch from Richard Purdie Poodle Updates: * Update corgi_ssp to make the GPIO chip selects optional * Enable corgi_ssp for use by poodle * Add corgi touchscreen platform device for poodle * Export locomo platform device. * Set framebuffer device parent correctly Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/mach-pxa/Makefile | 2 +- arch/arm/mach-pxa/corgi_ssp.c | 42 ++++++++++++++++-------- arch/arm/mach-pxa/poodle.c | 69 +++++++++++++++++++++++++++++++++++++-- include/asm-arm/arch-pxa/poodle.h | 2 ++ 5 files changed, 99 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 0104fd142e70..ea5137f319c4 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -61,6 +61,7 @@ config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends PXA_SHARPSL_25x select SHARP_LOCOMO + select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4e8a983e2b83..1610690be419 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o -obj-$(CONFIG_MACH_POODLE) += poodle.o +obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o obj-$(CONFIG_MACH_TOSA) += tosa.o # Support for blinky lights diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 8a25a1c8019f..f9421318cb7a 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -50,12 +50,14 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) unsigned long ret,flag; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + if (ssp_machinfo->cs_ads7846 >= 0) + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); ssp_write_word(&corgi_ssp_dev,data); ret = ssp_read_word(&corgi_ssp_dev); - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock_irqrestore(&corgi_ssp_lock, flag); return ret; @@ -68,12 +70,14 @@ unsigned long corgi_ssp_ads7846_putget(ulong data) void corgi_ssp_ads7846_lock(void) { spin_lock(&corgi_ssp_lock); - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + if (ssp_machinfo->cs_ads7846 >= 0) + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); } void corgi_ssp_ads7846_unlock(void) { - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); spin_unlock(&corgi_ssp_lock); } @@ -110,11 +114,13 @@ unsigned long corgi_ssp_dac_put(ulong data) ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); ssp_enable(&corgi_ssp_dev); - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); + if (ssp_machinfo->cs_lcdcon >= 0) + GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_write_word(&corgi_ssp_dev,data); /* Read null data back from device to prevent SSP overflow */ ssp_read_word(&corgi_ssp_dev); - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); + if (ssp_machinfo->cs_lcdcon >= 0) + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); ssp_disable(&corgi_ssp_dev); ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); @@ -147,7 +153,8 @@ int corgi_ssp_max1111_get(ulong data) int voltage,voltage1,voltage2; spin_lock_irqsave(&corgi_ssp_lock, flag); - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); + if (ssp_machinfo->cs_max1111 >= 0) + GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); ssp_disable(&corgi_ssp_dev); ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); ssp_enable(&corgi_ssp_dev); @@ -169,7 +176,8 @@ int corgi_ssp_max1111_get(ulong data) ssp_disable(&corgi_ssp_dev); ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); ssp_enable(&corgi_ssp_dev); - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); + if (ssp_machinfo->cs_max1111 >= 0) + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); spin_unlock_irqrestore(&corgi_ssp_lock, flag); if (voltage1 & 0xc0 || voltage2 & 0x3f) @@ -196,9 +204,12 @@ static int __init corgi_ssp_probe(struct platform_device *dev) int ret; /* Chip Select - Disable All */ - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); + if (ssp_machinfo->cs_lcdcon >= 0) + pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); + if (ssp_machinfo->cs_max1111 >= 0) + pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); + if (ssp_machinfo->cs_ads7846 >= 0) + pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); @@ -229,9 +240,12 @@ static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) static int corgi_ssp_resume(struct platform_device *dev) { - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + if (ssp_machinfo->cs_lcdcon >= 0) + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + if (ssp_machinfo->cs_max1111 >= 0) + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); ssp_enable(&corgi_ssp_dev); diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 234877a09dfb..9a9fa87cea9f 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -37,12 +37,15 @@ #include #include #include +#include +#include #include #include #include #include "generic.h" +#include "sharpsl.h" static struct resource poodle_scoop_resources[] = { [0] = { @@ -120,13 +123,71 @@ static struct resource locomo_resources[] = { }, }; -static struct platform_device locomo_device = { +struct platform_device poodle_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; +EXPORT_SYMBOL(poodle_locomo_device); + +/* + * Poodle SSP Device + */ + +struct platform_device poodle_ssp_device = { + .name = "corgi-ssp", + .id = -1, +}; + +struct corgissp_machinfo poodle_ssp_machinfo = { + .port = 1, + .cs_lcdcon = -1, + .cs_ads7846 = -1, + .cs_max1111 = -1, + .clk_lcdcon = 2, + .clk_ads7846 = 36, + .clk_max1111 = 2, +}; + + +/* + * Poodle Touch Screen Device + */ +static struct resource poodlets_resources[] = { + [0] = { + .start = POODLE_IRQ_GPIO_TP_INT, + .end = POODLE_IRQ_GPIO_TP_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned long poodle_get_hsync_len(void) +{ + return 0; +} + +static void poodle_null_hsync(void) +{ +} + +static struct corgits_machinfo poodle_ts_machinfo = { + .get_hsync_len = poodle_get_hsync_len, + .put_hsync = poodle_null_hsync, + .wait_hsync = poodle_null_hsync, +}; + +static struct platform_device poodle_ts_device = { + .name = "corgi-ts", + .dev = { + .platform_data = &poodle_ts_machinfo, + }, + .id = -1, + .num_resources = ARRAY_SIZE(poodlets_resources), + .resource = poodlets_resources, +}; + /* * MMC/SD Device @@ -259,8 +320,10 @@ static struct pxafb_mach_info poodle_fb_info __initdata = { }; static struct platform_device *devices[] __initdata = { - &locomo_device, + &poodle_locomo_device, &poodle_scoop_device, + &poodle_ssp_device, + &poodle_ts_device, }; static void poodle_poweroff(void) @@ -319,6 +382,7 @@ static void __init poodle_init(void) GPSR1 = 0x00000000; GPSR2 = 0x00000000; + set_pxa_fb_parent(&poodle_locomo_device.dev); set_pxa_fb_info(&poodle_fb_info); pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT); pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT); @@ -332,6 +396,7 @@ static void __init poodle_init(void) if (ret) { printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n"); } + corgi_ssp_set_machinfo(&poodle_ssp_machinfo); } static void __init fixup_poodle(struct machine_desc *desc, diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h index 6079e0aa1ab9..4d6a40315764 100644 --- a/include/asm-arm/arch-pxa/poodle.h +++ b/include/asm-arm/arch-pxa/poodle.h @@ -70,4 +70,6 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) +extern struct platform_device poodle_locomo_device; + #endif /* __ASM_ARCH_POODLE_H */ -- cgit v1.2.3 From 6902f523a328bba5af036699b1352389c0746526 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Jun 2006 19:30:18 +0100 Subject: [ARM] 3604/1: AT91RM9200 New boards Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/boot/compressed/head-at91rm9200.S | 12 + arch/arm/configs/ateb9200_defconfig | 1312 ++++++++++++++++++++++++++++ arch/arm/configs/carmeva_defconfig | 723 +++++++++++++++ arch/arm/configs/kafa_defconfig | 884 +++++++++++++++++++ arch/arm/configs/kb9202_defconfig | 780 +++++++++++++++++ arch/arm/mach-at91rm9200/Kconfig | 12 + arch/arm/mach-at91rm9200/Makefile | 10 +- arch/arm/mach-at91rm9200/board-carmeva.c | 131 +++ arch/arm/mach-at91rm9200/board-eb9200.c | 130 +++ arch/arm/mach-at91rm9200/board-kafa.c | 116 +++ arch/arm/mach-at91rm9200/board-kb9202.c | 125 +++ 11 files changed, 4231 insertions(+), 4 deletions(-) create mode 100644 arch/arm/configs/ateb9200_defconfig create mode 100644 arch/arm/configs/carmeva_defconfig create mode 100644 arch/arm/configs/kafa_defconfig create mode 100644 arch/arm/configs/kb9202_defconfig create mode 100644 arch/arm/mach-at91rm9200/board-carmeva.c create mode 100644 arch/arm/mach-at91rm9200/board-eb9200.c create mode 100644 arch/arm/mach-at91rm9200/board-kafa.c create mode 100644 arch/arm/mach-at91rm9200/board-kb9202.c (limited to 'arch') diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S index 2119ea62b547..57a3b163b2cb 100644 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ b/arch/arm/boot/compressed/head-at91rm9200.S @@ -49,6 +49,18 @@ cmp r7, r3 beq 99f + @ Embest ATEB9200 : 923 + mov r3, #(MACH_TYPE_ATEB9200 & 0xff) + orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00) + cmp r7, r3 + beq 99f + + @ Sperry-Sun KAFA : 662 + mov r3, #(MACH_TYPE_KAFA & 0xff) + orr r3, r3, #(MACH_TYPE_KAFA & 0xff00) + cmp r7, r3 + beq 99f + @ Unknown board, use the AT91RM9200DK board @ mov r7, #MACH_TYPE_AT91RM9200 mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig new file mode 100644 index 000000000000..69c39e098743 --- /dev/null +++ b/arch/arm/configs/ateb9200_defconfig @@ -0,0 +1,1312 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc3 +# Sun May 7 16:53:18 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +CONFIG_MACH_ATEB9200=y +# CONFIG_MACH_KAFA is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=m + +# +# Kernel Features +# +CONFIG_PREEMPT=y +CONFIG_NO_IDLE_HZ=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_IEEE80211_SOFTMAC is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_AT91_DATAFLASH=y +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +# CONFIG_NET_WIRELESS_RTNETLINK is not set + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=m +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_USB_HIDDEV=y + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_GL620A=y +CONFIG_USB_NET_NET1080=y +CONFIG_USB_NET_PLUSB=y +CONFIG_USB_NET_RNDIS_HOST=y +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_NET_ZAURUS=y +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +CONFIG_USB_SERIAL_CP2101=m +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=m +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=m +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=m +CONFIG_MMC_AT91RM9200=m + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_AT91=y +# CONFIG_RTC_DRV_TEST is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_ZISOFS_FS=m +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig new file mode 100644 index 000000000000..5ccd29a7c1fb --- /dev/null +++ b/arch/arm/configs/carmeva_defconfig @@ -0,0 +1,723 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue Jun 14 12:05:24 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_SYSCTL is not set +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +CONFIG_MACH_CARMEVA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_DISCONTIGMEM is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_AT91_DATAFLASH=y +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +CONFIG_ARM_AT91_ETHER_RMII=y +# CONFIG_SMC91X is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=m +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_AT91_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=m +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=m +CONFIG_MMC_AT91RM9200=m + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +CONFIG_DEVPTS_FS_XATTR=y +CONFIG_DEVPTS_FS_SECURITY=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS_FS=y +CONFIG_JFFS_FS_VERBOSE=0 +CONFIG_JFFS_PROC_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_NAND=y +# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig new file mode 100644 index 000000000000..51ded20e3f64 --- /dev/null +++ b/arch/arm/configs/kafa_defconfig @@ -0,0 +1,884 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc3 +# Sun May 7 16:54:53 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# + +# +# AT91RM9200 Board Type +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ATEB9200 is not set +CONFIG_MACH_KAFA=y + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_LEDS=y +# CONFIG_LEDS_TIMER is not set +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +CONFIG_MTD_BLOCK_RO=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_AT91_DATAFLASH=y +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=32 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91_WATCHDOG=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_AT91=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_AT91=y +# CONFIG_RTC_DRV_TEST is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig new file mode 100644 index 000000000000..fee4f566452e --- /dev/null +++ b/arch/arm/configs/kb9202_defconfig @@ -0,0 +1,780 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.13-rc2 +# Sun Aug 14 19:26:59 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +# CONFIG_KOBJECT_UEVENT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91RM9200=y + +# +# AT91RM9200 Implementations +# +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_CARMEVA is not set +CONFIG_MACH_KB9200=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_ZBOOT_ROM=y +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933" + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +CONFIG_DEBUG_DRIVER=y + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AT91=y +CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_AT91_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_AT91_SPI is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_DEVPTS_FS_XATTR=y +# CONFIG_DEVPTS_FS_SECURITY is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_MAGIC_SYSRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91rm9200/Kconfig index 4b7218fc3eb1..1ab5b7828318 100644 --- a/arch/arm/mach-at91rm9200/Kconfig +++ b/arch/arm/mach-at91rm9200/Kconfig @@ -40,6 +40,18 @@ config MACH_KB9200 help Select this if you are using KwikByte's KB920x board +config MACH_ATEB9200 + bool "Embest's ATEB9200" + depends on ARCH_AT91RM9200 + help + Select this if you are using Embest's ATEB9200 board + +config MACH_KAFA + bool "Sperry-Sun KAFA board" + depends on ARCH_AT91RM9200 + help + Select this if you are using Sperry-Sun's KAFA board + comment "AT91RM9200 Feature Selections" diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index ef88c4128edc..c8f544b789c0 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -12,16 +12,18 @@ obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o -#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o -#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o +obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o +obj-$(CONFIG_MACH_KB9200) += board-kb9202.o +obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o +obj-$(CONFIG_MACH_KAFA) += board-kafa.o # LEDs support led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o led-$(CONFIG_MACH_AT91RM9200EK) += leds.o led-$(CONFIG_MACH_CSB337) += leds.o led-$(CONFIG_MACH_CSB637) += leds.o -#led-$(CONFIG_MACH_KB9200) += leds.o -#led-$(CONFIG_MACH_KAFA) += leds.o +led-$(CONFIG_MACH_KB9200) += leds.o +led-$(CONFIG_MACH_KAFA) += leds.o obj-$(CONFIG_LEDS) += $(led-y) # VGA support diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c new file mode 100644 index 000000000000..9183cb75ccd0 --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-carmeva.c @@ -0,0 +1,131 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-carmeva.c + * + * Copyright (c) 2005 Peer Georgi + * Conitec Datasystems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init carmeva_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata carmeva_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init carmeva_map_io(void) +{ + at91rm9200_map_io(); + + /* Initialize clocks: 20.000 MHz crystal */ + at91_clock_init(20000000); + + /* Setup the serial ports and console */ + at91_init_serial(&carmeva_uart_config); +} + +static struct at91_eth_data __initdata carmeva_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata carmeva_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata carmeva_udc_data = { + .vbus_pin = AT91_PIN_PD12, + .pullup_pin = AT91_PIN_PD9, +}; + +/* FIXME: user dependend */ +// static struct at91_cf_data __initdata carmeva_cf_data = { +// .det_pin = AT91_PIN_PB0, +// .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +// }; + +static struct at91_mmc_data __initdata carmeva_mmc_data = { + .is_b = 0, + .wire4 = 1, +}; + +static void __init carmeva_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&carmeva_eth_data); + /* USB Host */ + at91_add_device_usbh(&carmeva_usbh_data); + /* USB Device */ + at91_add_device_udc(&carmeva_udc_data); + /* I2C */ + at91_add_device_i2c(); + /* Compact Flash */ +// at91_add_device_cf(&carmeva_cf_data); + /* SPI */ +// at91_add_device_spi(NULL, 0); + /* MMC */ + at91_add_device_mmc(&carmeva_mmc_data); +} + +MACHINE_START(CARMEVA, "Carmeva") + /* Maintainer: Conitec Datasystems */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = carmeva_map_io, + .init_irq = carmeva_init_irq, + .init_machine = carmeva_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c new file mode 100644 index 000000000000..c7e4546a262d --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-eb9200.c @@ -0,0 +1,130 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-eb9200.c + * + * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest + * by Andrew Patrikalakis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init eb9200_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(BGA_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata eb9200_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init eb9200_map_io(void) +{ + at91rm9200_map_io(); + + /* Initialize clocks: 18.432 MHz crystal */ + at91_clock_init(18432000); + + /* Setup the serial ports and console */ + at91_init_serial(&eb9200_uart_config); +} + +static struct at91_eth_data __initdata eb9200_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata eb9200_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata eb9200_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +static struct at91_cf_data __initdata eb9200_cf_data = { + .det_pin = AT91_PIN_PB0, + .rst_pin = AT91_PIN_PC5, + // .irq_pin = ... not connected + // .vcc_pin = ... always powered +}; + +static struct at91_mmc_data __initdata eb9200_mmc_data = { + .is_b = 0, + .wire4 = 1, +}; + +static void __init eb9200_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&eb9200_eth_data); + /* USB Host */ + at91_add_device_usbh(&eb9200_usbh_data); + /* USB Device */ + at91_add_device_udc(&eb9200_udc_data); + /* I2C */ + at91_add_device_i2c(); + /* Compact Flash */ + at91_add_device_cf(&eb9200_cf_data); + /* SPI */ + at91_add_device_spi(NULL, 0); + /* MMC */ + /* only supports 1 or 4 bit interface, not wired through to SPI */ + at91_add_device_mmc(&eb9200_mmc_data); +} + +MACHINE_START(ATEB9200, "Embest ATEB9200") + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = eb9200_map_io, + .init_irq = eb9200_init_irq, + .init_machine = eb9200_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c new file mode 100644 index 000000000000..35d459fdfcf1 --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-kafa.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-kafa.c + * + * Copyright (C) 2006 Sperry-Sun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init kafa_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(PQFP_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata kafa_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 2, + .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init kafa_map_io(void) +{ + at91rm9200_map_io(); + + /* Initialize clocks: 18.432 MHz crystal */ + at91_clock_init(18432000); + + /* Set up the LEDs */ + at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); + + /* Setup the serial ports and console */ + at91_init_serial(&kafa_uart_config); +} + +static struct at91_eth_data __initdata kafa_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata kafa_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata kafa_udc_data = { + .vbus_pin = AT91_PIN_PB6, + .pullup_pin = AT91_PIN_PB7, +}; + +static void __init kafa_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&kafa_eth_data); + /* USB Host */ + at91_add_device_usbh(&kafa_usbh_data); + /* USB Device */ + at91_add_device_udc(&kafa_udc_data); + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(NULL, 0); +} + +MACHINE_START(KAFA, "Sperry-Sun KAFA") + /* Maintainer: Sergei Sharonov */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = kafa_map_io, + .init_irq = kafa_init_irq, + .init_machine = kafa_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c new file mode 100644 index 000000000000..6ba65ef48809 --- /dev/null +++ b/arch/arm/mach-at91rm9200/board-kb9202.c @@ -0,0 +1,125 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-kb9202.c + * + * Copyright (c) 2005 kb_admin + * KwikByte, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + +static void __init kb9202_init_irq(void) +{ + /* Initialize AIC controller */ + at91rm9200_init_irq(NULL); + + /* Set up the GPIO interrupts */ + at91_gpio_irq_setup(PQFP_GPIO_BANKS); +} + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata kb9202_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 3, + .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init kb9202_map_io(void) +{ + at91rm9200_map_io(); + + /* Initialize clocks: 10 MHz crystal */ + at91_clock_init(10000000); + + /* Set up the LEDs */ + at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); + + /* Setup the serial ports and console */ + at91_init_serial(&kb9202_uart_config); +} + +static struct at91_eth_data __initdata kb9202_eth_data = { + .phy_irq_pin = AT91_PIN_PB29, + .is_rmii = 0, +}; + +static struct at91_usbh_data __initdata kb9202_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata kb9202_udc_data = { + .vbus_pin = AT91_PIN_PB24, + .pullup_pin = AT91_PIN_PB22, +}; + +static struct at91_mmc_data __initdata kb9202_mmc_data = { + .det_pin = AT91_PIN_PB2, + .is_b = 0, + .wire4 = 1, +}; + +static void __init kb9202_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&kb9202_eth_data); + /* USB Host */ + at91_add_device_usbh(&kb9202_usbh_data); + /* USB Device */ + at91_add_device_udc(&kb9202_udc_data); + /* MMC */ + at91_add_device_mmc(&kb9202_mmc_data); + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(NULL, 0); +} + +MACHINE_START(KB9200, "KB920x") + /* Maintainer: KwikByte, Inc. */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = kb9202_map_io, + .init_irq = kb9202_init_irq, + .init_machine = kb9202_board_init, +MACHINE_END -- cgit v1.2.3 From 907d6deb625cd7ff5fea3ef4b20dfb6c1c19c3ee Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Jun 2006 19:30:19 +0100 Subject: [ARM] 3605/1: AT91RM9200 Power Management Patch from Andrew Victor This patch adds the core Power Management support for the AT91RM9200 processor. It will support suspend-to-RAM and standby modes. The suspend-to-RAM functionality is not 100% complete. The code that needs to be execute from the internal SRAM to restore the system is outstanding. For now we just fall through to Standby mode. The AT91-specific at91_suspend_entering_slow_clock() function will eventually be replaced by clk_must_disable() once that functionality is added to mainline clock API. Patch from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/generic.h | 7 + arch/arm/mach-at91rm9200/pm.c | 225 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-at91rm9200/gpio.h | 5 + 3 files changed, 237 insertions(+) create mode 100644 arch/arm/mach-at91rm9200/pm.c (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h index 9bd541eba0a0..f0d969d7d874 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91rm9200/generic.h @@ -16,3 +16,10 @@ extern struct sys_timer at91rm9200_timer; extern void __init at91rm9200_map_io(void); extern int __init at91_clock_init(unsigned long main_clock); +struct device; +extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); + + /* Power Management */ +extern void at91_irq_suspend(void); +extern void at91_irq_resume(void); + diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c new file mode 100644 index 000000000000..47e5480feb7e --- /dev/null +++ b/arch/arm/mach-at91rm9200/pm.c @@ -0,0 +1,225 @@ +/* + * arch/arm/mach-at91rm9200/pm.c + * AT91 Power Management + * + * Copyright (C) 2005 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "generic.h" + + +static int at91_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + + +static suspend_state_t target_state; + +/* + * Called after processes are frozen, but before we shutdown devices. + */ +static int at91_pm_prepare(suspend_state_t state) +{ + target_state = state; + return 0; +} + +/* + * Verify that all the clocks are correct before entering + * slow-clock mode. + */ +static int at91_pm_verify_clocks(void) +{ + unsigned long scsr; + int i; + + scsr = at91_sys_read(AT91_PMC_SCSR); + + /* USB must not be using PLLB */ + if ((scsr & (AT91_PMC_UHP | AT91_PMC_UDP)) != 0) { + pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); + return 0; + } + +#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ + for (i = 0; i < 4; i++) { + u32 css; + + if ((scsr & (AT91_PMC_PCK0 << i)) == 0) + continue; + + css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; + if (css != AT91_PMC_CSS_SLOW) { + pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); + return 0; + } + } +#endif + + return 1; +} + +/* + * Call this from platform driver suspend() to see how deeply to suspend. + * For example, some controllers (like OHCI) need one of the PLL clocks + * in order to act as a wakeup source, and those are not available when + * going into slow clock mode. + * + * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have + * the very same problem (but not using at91 main_clk), and it'd be better + * to add one generic API rather than lots of platform-specific ones. + */ +int at91_suspend_entering_slow_clock(void) +{ + return (target_state == PM_SUSPEND_MEM); +} +EXPORT_SYMBOL(at91_suspend_entering_slow_clock); + + +static void (*slow_clock)(void); + + + +static int at91_pm_enter(suspend_state_t state) +{ + at91_gpio_suspend(); + at91_irq_suspend(); + + pr_debug("AT91: PM - wake mask %08x, pm state %d\n", + /* remember all the always-wake irqs */ + (at91_sys_read(AT91_PMC_PCSR) + | (1 << AT91_ID_FIQ) + | (1 << AT91_ID_SYS) + | (1 << AT91_ID_IRQ0) + | (1 << AT91_ID_IRQ1) + | (1 << AT91_ID_IRQ2) + | (1 << AT91_ID_IRQ3) + | (1 << AT91_ID_IRQ4) + | (1 << AT91_ID_IRQ5) + | (1 << AT91_ID_IRQ6)) + & at91_sys_read(AT91_AIC_IMR), + state); + + switch (state) { + /* + * Suspend-to-RAM is like STANDBY plus slow clock mode, so + * drivers must suspend more deeply: only the master clock + * controller may be using the main oscillator. + */ + case PM_SUSPEND_MEM: + /* + * Ensure that clocks are in a valid state. + */ + if (!at91_pm_verify_clocks()) + goto error; + + /* + * Enter slow clock mode by switching over to clk32k and + * turning off the main oscillator; reverse on wakeup. + */ + if (slow_clock) { + slow_clock(); + break; + } else { + /* DEVELOPMENT ONLY */ + pr_info("AT91: PM - no slow clock mode yet ...\n"); + /* FALLTHROUGH leaving master clock alone */ + } + + /* + * STANDBY mode has *all* drivers suspended; ignores irqs not + * marked as 'wakeup' event sources; and reduces DRAM power. + * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and + * nothing fancy done with main or cpu clocks. + */ + case PM_SUSPEND_STANDBY: + /* + * NOTE: the Wait-for-Interrupt instruction needs to be + * in icache so the SDRAM stays in self-refresh mode until + * the wakeup IRQ occurs. + */ + asm("b 1f; .align 5; 1:"); + asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ + at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ + /* fall though to next state */ + + case PM_SUSPEND_ON: + asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ + break; + + default: + pr_debug("AT91: PM - bogus suspend state %d\n", state); + goto error; + } + + pr_debug("AT91: PM - wakeup %08x\n", + at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); + +error: + target_state = PM_SUSPEND_ON; + at91_irq_resume(); + at91_gpio_resume(); + return 0; +} + + +static struct pm_ops at91_pm_ops ={ + .pm_disk_mode = 0, + .valid = at91_pm_valid_state, + .prepare = at91_pm_prepare, + .enter = at91_pm_enter, +}; + +static int __init at91_pm_init(void) +{ + printk("AT91: Power Management\n"); + +#ifdef CONFIG_AT91_PM_SLOW_CLOCK + /* REVISIT allocations of SRAM should be dynamically managed. + * FIQ handlers and other components will want SRAM/TCM too... + */ + slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); + memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); +#endif + + /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ + at91_sys_write(AT91_SDRAMC_LPR, 0); + + pm_set_ops(&at91_pm_ops); + + return 0; +} +arch_initcall(at91_pm_init); diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index 6176ab2dc417..dbde1baaf251 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_AT91RM9200_GPIO_H #define __ASM_ARCH_AT91RM9200_GPIO_H +#include + #define PIN_BASE NR_AIC_IRQS #define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ @@ -188,6 +190,9 @@ extern int at91_set_multi_drive(unsigned pin, int is_on); /* callable at any time */ extern int at91_set_gpio_value(unsigned pin, int value); extern int at91_get_gpio_value(unsigned pin); + +extern void at91_gpio_suspend(void); +extern void at91_gpio_resume(void); #endif #endif -- cgit v1.2.3 From 5c3fddced9f62f4b175ce400bb96b23f47626e50 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Jun 2006 19:30:20 +0100 Subject: [ARM] 3607/1: AT91RM9200 misc fixes Patch from Andrew Victor This final patch includes some general fixes. 1. Link in pm.o if CONFIG_PM is enabled. [Should have been included in patch 3605/1]. 2. Use __raw_readl()/__raw_writel() when accessing System Peripheral registers. 3. Removed some unnecessary includes Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/Makefile | 7 +++++++ include/asm-arm/arch-at91rm9200/hardware.h | 4 ++-- include/asm-arm/arch-at91rm9200/io.h | 1 - include/asm-arm/arch-at91rm9200/irqs.h | 2 -- 4 files changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index c8f544b789c0..81ebc6684ad2 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -7,6 +7,8 @@ obj-m := obj-n := obj- := +obj-$(CONFIG_PM) += pm.o + # Board-specific support obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o @@ -28,3 +30,8 @@ obj-$(CONFIG_LEDS) += $(led-y) # VGA support #obj-$(CONFIG_FB_S1D13XXX) += ics1523.o + + +ifeq ($(CONFIG_PM_DEBUG),y) +CFLAGS_pm.o += -DDEBUG +endif diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 87f40df57140..235d39d91107 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -84,14 +84,14 @@ static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - return readl(addr + reg_offset); + return __raw_readl(addr + reg_offset); } static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - writel(value, addr + reg_offset); + __raw_writel(value, addr + reg_offset); } #endif diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h index 23e670d85c9d..88fd1bebcef3 100644 --- a/include/asm-arm/arch-at91rm9200/io.h +++ b/include/asm-arm/arch-at91rm9200/io.h @@ -21,7 +21,6 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include #include #define IO_SPACE_LIMIT 0xFFFFFFFF diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index 27b0497f1b36..2dc93b174a8f 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -37,8 +37,6 @@ * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. */ -#include - #define NR_IRQS (NR_AIC_IRQS + (4 * 32)) -- cgit v1.2.3 From ec57b709c3dc2e8b7643c51fc4c3fdae42b29be2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 20 Jun 2006 19:31:06 +0100 Subject: [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig Patch from Ben Dooks Update s3c2410_defconfig to latest kernel with the latest patches Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/s3c2410_defconfig | 76 +++++++++++++++++++------------------- 1 file changed, 39 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 3cec29d56c8e..e17661380096 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Mon Mar 20 20:36:02 2006 +# Linux kernel version: 2.6.17 +# Tue Jun 20 18:57:01 2006 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 # # Code maturity level options @@ -27,6 +29,7 @@ CONFIG_SYSVIPC=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_UID16=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -42,10 +45,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -57,7 +56,6 @@ CONFIG_OBSOLETE_INTERMODULE=y # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -65,6 +63,7 @@ CONFIG_KMOD=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -92,6 +91,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -106,6 +106,8 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_NETX is not set # # S3C24XX Implementations @@ -116,14 +118,19 @@ CONFIG_ARCH_BAST=y CONFIG_BAST_PC104_IRQ=y CONFIG_ARCH_H1940=y CONFIG_MACH_N30=y +CONFIG_MACH_SMDK=y CONFIG_ARCH_SMDK2410=y CONFIG_ARCH_S3C2440=y +CONFIG_SMDK2440_CPU2440=y +CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_VR1000=y CONFIG_MACH_RX3715=y CONFIG_MACH_OTOM=y CONFIG_MACH_NEXCODER_2440=y CONFIG_CPU_S3C2410=y +CONFIG_CPU_S3C244X=y CONFIG_CPU_S3C2440=y +CONFIG_CPU_S3C2442=y # # S3C2410 Boot @@ -251,12 +258,15 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set # CONFIG_NETFILTER is not set # @@ -360,7 +370,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set @@ -385,7 +394,6 @@ CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -694,7 +702,6 @@ CONFIG_S3C2410_WATCHDOG=y # # CONFIG_USBPCWATCHDOG is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set CONFIG_S3C2410_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -743,9 +750,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -807,18 +812,29 @@ CONFIG_SENSORS_LM85=m # # -# Multimedia Capabilities Port drivers +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers # # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -828,6 +844,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set @@ -863,6 +880,7 @@ CONFIG_FONT_8x16=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -915,9 +933,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -930,15 +946,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_MDC800 is not set -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - # # USB Network Adapters # @@ -984,23 +991,18 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_ETH is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set # # MMC/SD Card support # # CONFIG_MMC is not set +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + # # File systems # @@ -1052,7 +1054,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1193,6 +1194,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y -- cgit v1.2.3 From 55c20c0af7fe7d5d09af4addfafcfe3bdc500f5d Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Jun 2006 19:31:39 +0100 Subject: [ARM] 3599/1: AT91RM9200 remove global variables Patch from Andrew Victor This patch removes some now unnecessary global variables - at91_master_clock, at91_serial_map, at91_console_port. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/clock.c | 5 +---- arch/arm/mach-at91rm9200/common.c | 11 ----------- include/asm-arm/arch-at91rm9200/board.h | 7 ------- 3 files changed, 1 insertion(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index 30042d2bac5f..fe71b834899b 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -28,10 +28,10 @@ #include #include -#include /* for master clock global */ #include "generic.h" + /* * There's a lot more which can be done with clocks, including cpufreq * integration, slow clock mode support (for system suspend), letting @@ -722,9 +722,6 @@ int __init at91_clock_init(unsigned long main_clock) (unsigned) main_clock / 1000000, ((unsigned) main_clock % 1000000) / 1000); - /* FIXME get rid of master_clock global */ - at91_master_clock = mck.rate_hz; - #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS /* establish PCK0..PCK3 parentage */ for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) { diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c index 40d29a73b5c5..1da68966e77f 100644 --- a/arch/arm/mach-at91rm9200/common.c +++ b/arch/arm/mach-at91rm9200/common.c @@ -108,14 +108,3 @@ void __init at91rm9200_map_io(void) iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } - -unsigned long at91_master_clock; - -EXPORT_SYMBOL(at91_master_clock); - - -int at91_serial_map[AT91_NR_UART]; -int at91_console_port; - -EXPORT_SYMBOL(at91_serial_map); -EXPORT_SYMBOL(at91_console_port); diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index 587948d56753..1fdd70b23809 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -31,13 +31,6 @@ #ifndef __ASM_ARCH_BOARD_H #define __ASM_ARCH_BOARD_H - /* Clocks */ -extern unsigned long at91_master_clock; - - /* Serial Port */ -extern int at91_serial_map[AT91_NR_UART]; -extern int at91_console_port; - #include #include #include -- cgit v1.2.3 From ea75ee9ab8835ece099589c729574aa8aa94c0a6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 20 Jun 2006 19:53:16 +0100 Subject: [ARM] Include asm/hardware.h not asm/arch/hardware.h Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/board-carmeva.c | 2 +- arch/arm/mach-at91rm9200/board-csb337.c | 2 +- arch/arm/mach-at91rm9200/board-csb637.c | 2 +- arch/arm/mach-at91rm9200/board-dk.c | 2 +- arch/arm/mach-at91rm9200/board-eb9200.c | 2 +- arch/arm/mach-at91rm9200/board-ek.c | 2 +- arch/arm/mach-at91rm9200/board-kafa.c | 2 +- arch/arm/mach-at91rm9200/board-kb9202.c | 2 +- arch/arm/mach-at91rm9200/clock.c | 2 +- arch/arm/mach-at91rm9200/common.c | 2 +- arch/arm/mach-at91rm9200/devices.c | 2 +- arch/arm/mach-at91rm9200/gpio.c | 2 +- arch/arm/mach-netx/fb.c | 2 +- arch/arm/mach-pnx4008/serial.c | 2 +- include/asm-arm/arch-at91rm9200/memory.h | 2 +- include/asm-arm/arch-at91rm9200/system.h | 2 +- include/asm-arm/arch-at91rm9200/timex.h | 2 +- include/asm-arm/arch-at91rm9200/uncompress.h | 2 +- 18 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91rm9200/board-carmeva.c index 9183cb75ccd0..2c138b542ebe 100644 --- a/arch/arm/mach-at91rm9200/board-carmeva.c +++ b/arch/arm/mach-at91rm9200/board-carmeva.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 3b9de181ae32..e94645d77f7a 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index 2c4470d110da..67d5f7786cdb 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index eb02ca95be79..48d7390fa584 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c index c7e4546a262d..a3e2df968a66 100644 --- a/arch/arm/mach-at91rm9200/board-eb9200.c +++ b/arch/arm/mach-at91rm9200/board-eb9200.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index 4d7468e42679..72202ed830ad 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91rm9200/board-kafa.c index 35d459fdfcf1..bf760c5e0c46 100644 --- a/arch/arm/mach-at91rm9200/board-kafa.c +++ b/arch/arm/mach-at91rm9200/board-kafa.c @@ -34,7 +34,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c index 6ba65ef48809..f06d2b54cc9a 100644 --- a/arch/arm/mach-at91rm9200/board-kb9202.c +++ b/arch/arm/mach-at91rm9200/board-kb9202.c @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index fe71b834899b..edc2cc837ae6 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include "generic.h" diff --git a/arch/arm/mach-at91rm9200/common.c b/arch/arm/mach-at91rm9200/common.c index 1da68966e77f..e836f8537a1d 100644 --- a/arch/arm/mach-at91rm9200/common.c +++ b/arch/arm/mach-at91rm9200/common.c @@ -16,7 +16,7 @@ #include #include -#include +#include #include "generic.h" static struct map_desc at91rm9200_io_desc[] __initdata = { diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index bf753e306a3a..1cf85d231baa 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -16,7 +16,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 3430ea054662..83c34747087b 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -16,7 +16,7 @@ #include #include -#include +#include #include static const u32 pio_controller_offset[4] = { diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index e169b683e4de..ef0ab6115c0b 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -24,7 +24,7 @@ #include #include -#include +#include struct clk {}; diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c index 2e1e04cc048c..10322384e45d 100644 --- a/arch/arm/mach-pnx4008/serial.c +++ b/arch/arm/mach-pnx4008/serial.c @@ -16,7 +16,7 @@ #include #include -#include +#include #include #include diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h index 462f1f0ad67c..3c327c404373 100644 --- a/include/asm-arm/arch-at91rm9200/memory.h +++ b/include/asm-arm/arch-at91rm9200/memory.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -#include +#include #define PHYS_OFFSET (AT91_SDRAM_BASE) diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h index 945e66507a78..8a2ff472e4cf 100644 --- a/include/asm-arm/arch-at91rm9200/system.h +++ b/include/asm-arm/arch-at91rm9200/system.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h index 3f112dd12587..88687cefe6eb 100644 --- a/include/asm-arm/arch-at91rm9200/timex.h +++ b/include/asm-arm/arch-at91rm9200/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include +#include #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index 7b38497c24b5..ec7811ab0a52 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include +#include /* * The following code assumes the serial port has already been -- cgit v1.2.3 From 4af6fee18822d012a15b4c9b8992e1f2793dfe0b Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Tue, 20 Jun 2006 21:30:44 +0100 Subject: [ARM] 3610/1: Make reboot work on Versatile Patch from Deepak Saxena This patch makes soft reboot work on the Versatile board. Thanks to Catalin Marinas @ ARM for pointing out the proper way to do this. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/Kconfig | 112 ++++++++++++++++---------------- include/asm-arm/arch-versatile/system.h | 16 ++--- 2 files changed, 63 insertions(+), 65 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dfb97fe045d0..1b7e5c2e90ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -93,15 +93,49 @@ choice prompt "ARM system type" default ARCH_VERSATILE +config ARCH_AAEC2000 + bool "Agilent AAEC-2000 based" + select ARM_AMBA + help + This enables support for systems based on the Agilent AAEC-2000 + +config ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + select ARM_AMBA + select ICST525 + help + Support for ARM's Integrator platform. + +config ARCH_REALVIEW + bool "ARM Ltd. RealView family" + select ARM_AMBA + select ICST307 + help + This enables support for ARM Ltd RealView boards. + +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + select ARM_AMBA + select ARM_VIC + select ICST307 + help + This enables support for ARM Ltd Versatile board. + +config ARCH_AT91RM9200 + bool "Atmel AT91RM9200" + help + Say Y here if you intend to run this kernel on an Atmel + AT91RM9200-based board. + config ARCH_CLPS7500 - bool "Cirrus-CL-PS7500FE" + bool "Cirrus CL-PS7500FE" select TIMER_ACORN select ISA help Support for the Cirrus Logic PS7500FE system-on-a-chip. config ARCH_CLPS711X - bool "CLPS711x/EP721x-based" + bool "Cirrus Logic CLPS711x/EP721x-based" help Support for Cirrus Logic 711x/721x based boards. @@ -135,12 +169,22 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_INTEGRATOR - bool "Integrator" - select ARM_AMBA - select ICST525 +config ARCH_NETX + bool "Hilscher NetX based" + select ARM_VIC help - Support for ARM's Integrator platform. + This enables support for systems based on the Hilscher NetX Soc + +config ARCH_H720X + bool "Hynix HMS720x-based" + select ISA_DMA_API + help + This enables support for systems based on the Hynix HMS720x + +config ARCH_IMX + bool "IMX" + help + Support for Motorola's i.MX family of processors (MX1, MXL). config ARCH_IOP3XX bool "IOP3xx-based" @@ -178,6 +222,11 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to . +config ARCH_PNX4008 + bool "Philips Nexperia PNX4008 Mobile" + help + This enables support for Philips PNX4008 mobile platform. + config ARCH_PXA bool "PXA2xx-based" select ARCH_MTD_XIP @@ -232,55 +281,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_VERSATILE - bool "Versatile" - select ARM_AMBA - select ARM_VIC - select ICST307 - help - This enables support for ARM Ltd Versatile board. - -config ARCH_REALVIEW - bool "RealView" - select ARM_AMBA - select ICST307 - help - This enables support for ARM Ltd RealView boards. - -config ARCH_IMX - bool "IMX" - help - Support for Motorola's i.MX family of processors (MX1, MXL). - -config ARCH_H720X - bool "Hynix-HMS720x-based" - select ISA_DMA_API - help - This enables support for systems based on the Hynix HMS720x - -config ARCH_AAEC2000 - bool "Agilent AAEC-2000 based" - select ARM_AMBA - help - This enables support for systems based on the Agilent AAEC-2000 - -config ARCH_AT91RM9200 - bool "AT91RM9200" - help - Say Y here if you intend to run this kernel on an Atmel - AT91RM9200-based board. - -config ARCH_PNX4008 - bool "Philips Nexperia PNX4008 Mobile" - help - This enables support for Philips PNX4008 mobile platform. - -config ARCH_NETX - bool "Hilscher NetX based" - select ARM_VIC - help - This enables support for systems based on the Hilscher NetX Soc - endchoice source "arch/arm/mach-clps711x/Kconfig" diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h index 8889a189739f..71c6254c0d9b 100644 --- a/include/asm-arm/arch-versatile/system.h +++ b/include/asm-arm/arch-versatile/system.h @@ -36,16 +36,14 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - unsigned int hdr_ctrl = (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_RESETCTL_OFFSET); - unsigned int val; + u32 val; - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - val = __raw_readl(hdr_ctrl); - val |= VERSATILE_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; + val |= 0x105; + + __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); + __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); + __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); } #endif -- cgit v1.2.3 From 905f14672e6d0552bfde954d5f7adb5f2c7a7960 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 20 Jun 2006 23:27:37 +0100 Subject: [ARM] Fix tosa build error tosa.c references mdelay(), but was missing linux/delay.h Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afa223b9e7a2..7152bc13680f 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3