From 238dd317f74250983aefbde6dc0a1f345a717993 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 29 Aug 2010 17:08:44 +0200 Subject: MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by: Xin Zhen Signed-off-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/1563/ Signed-off-by: Ralf Baechle --- --- arch/mips/ar7/platform.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) (limited to 'arch/mips/ar7/platform.c') diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index 0da5b2b8dd88..7d2fab392327 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -357,6 +357,11 @@ static struct gpio_led default_leds[] = { }, }; +static struct gpio_led titan_leds[] = { + { .name = "status", .gpio = 8, .active_low = 1, }, + { .name = "wifi", .gpio = 13, .active_low = 1, }, +}; + static struct gpio_led dsl502t_leds[] = { { .name = "status", @@ -495,6 +500,9 @@ static void __init detect_leds(void) } else if (strstr(prid, "DG834")) { ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); ar7_led_data.leds = dg834g_leds; + } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) { + ar7_led_data.num_leds = ARRAY_SIZE(titan_leds); + ar7_led_data.leds = titan_leds; } } @@ -560,6 +568,51 @@ static int __init ar7_register_uarts(void) return 0; } +static void __init titan_fixup_devices(void) +{ + /* Set vlynq0 data */ + vlynq_low_data.reset_bit = 15; + vlynq_low_data.gpio_bit = 14; + + /* Set vlynq1 data */ + vlynq_high_data.reset_bit = 16; + vlynq_high_data.gpio_bit = 7; + + /* Set vlynq0 resources */ + vlynq_low_res[0].start = TITAN_REGS_VLYNQ0; + vlynq_low_res[0].end = TITAN_REGS_VLYNQ0 + 0xff; + vlynq_low_res[1].start = 33; + vlynq_low_res[1].end = 33; + vlynq_low_res[2].start = 0x0c000000; + vlynq_low_res[2].end = 0x0fffffff; + vlynq_low_res[3].start = 80; + vlynq_low_res[3].end = 111; + + /* Set vlynq1 resources */ + vlynq_high_res[0].start = TITAN_REGS_VLYNQ1; + vlynq_high_res[0].end = TITAN_REGS_VLYNQ1 + 0xff; + vlynq_high_res[1].start = 34; + vlynq_high_res[1].end = 34; + vlynq_high_res[2].start = 0x40000000; + vlynq_high_res[2].end = 0x43ffffff; + vlynq_high_res[3].start = 112; + vlynq_high_res[3].end = 143; + + /* Set cpmac0 data */ + cpmac_low_data.phy_mask = 0x40000000; + + /* Set cpmac1 data */ + cpmac_high_data.phy_mask = 0x80000000; + + /* Set cpmac0 resources */ + cpmac_low_res[0].start = TITAN_REGS_MAC0; + cpmac_low_res[0].end = TITAN_REGS_MAC0 + 0x7ff; + + /* Set cpmac1 resources */ + cpmac_high_res[0].start = TITAN_REGS_MAC1; + cpmac_high_res[0].end = TITAN_REGS_MAC1 + 0x7ff; +} + static int __init ar7_register_devices(void) { void __iomem *bootcr; @@ -574,6 +627,9 @@ static int __init ar7_register_devices(void) if (res) pr_warning("unable to register physmap-flash: %d\n", res); + if (ar7_is_titan()) + titan_fixup_devices(); + ar7_device_disable(vlynq_low_data.reset_bit); res = platform_device_register(&vlynq_low); if (res) -- cgit v1.2.3