From 093c3f94e922d83a734fc4da08cc5814990f32c6 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 5 Dec 2019 16:01:20 -0800 Subject: ARM: dts: BCM5301X: Fix MDIO node address/size cells The MDIO node on BCM5301X had an reversed #address-cells and #size-cells properties, correct those, silencing checker warnings: .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected Reported-by: Simon Horman Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT") Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 372dc1eb88a0..2d9b4dd05830 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -353,8 +353,8 @@ mdio: mdio@18003000 { compatible = "brcm,iproc-mdio"; reg = <0x18003000 0x8>; - #size-cells = <1>; - #address-cells = <0>; + #size-cells = <0>; + #address-cells = <1>; }; mdio-bus-mux@18003000 { -- cgit v1.2.3 From 0634a2dc9566de977970c78a06c7ea15cd9c890f Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Wed, 4 Dec 2019 13:56:33 +0100 Subject: ARM: dts: bcm2711: fix soc's node dma-ranges Raspberry Pi's firmware has a feature to select how much memory to reserve for its GPU called 'gpu_mem'. The possible values go from 16MB to 944MB, with a default of 64MB. This memory resides in the topmost part of the lower 1GB memory area and grows bigger expanding towards the begging of memory. It turns out that with low 'gpu_mem' values (16MB and 32MB) the size of the memory available to the system in the lower 1GB area can outgrow the interconnect's dma-range as its size was selected based on the maximum system memory available given the default gpu_mem configuration. This makes that memory slice unavailable for DMA. And may cause nasty kernel warnings if CMA happens to include it. Change soc's dma-ranges to really reflect it's HW limitation, which is being able to only DMA to the lower 1GB area. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Phil Elwell Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm2711.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 961bed832755..e2f6ffb00aa9 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -43,7 +43,7 @@ <0x7c000000 0x0 0xfc000000 0x02000000>, <0x40000000 0x0 0xff800000 0x00800000>; /* Emulate a contiguous 30-bit address range for DMA */ - dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; + dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>; /* * This node is the provider for the enable-method for -- cgit v1.2.3 From fac2c2da3596d77c343988bb0d41a8c533b2e73c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 6 Dec 2019 10:19:09 -0800 Subject: ARM: dts: Cygnus: Fix MDIO node address/size cells The MDIO node on Cygnus had an reversed #address-cells and #size-cells properties, correct those. Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY") Reported-by: Simon Horman Reviewed-by: Ray Jui Reviewed-by: Simon Horman Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 2dac3efc7640..1bc45cfd5453 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -174,8 +174,8 @@ mdio: mdio@18002000 { compatible = "brcm,iproc-mdio"; reg = <0x18002000 0x8>; - #size-cells = <1>; - #address-cells = <0>; + #size-cells = <0>; + #address-cells = <1>; status = "disabled"; gphy0: ethernet-phy@0 { -- cgit v1.2.3 From 30e647a764d446723a7e0fb08d209e0104f16173 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 30 Nov 2019 13:31:13 +0100 Subject: ARM: dts: bcm283x: Fix critical trip point During definition of the CPU thermal zone of BCM283x SoC family there was a misunderstanding of the meaning "criticial trip point" and the thermal throttling range of the VideoCore firmware. The latter one takes effect when the core temperature is at least 85 degree celsius or higher So the current critical trip point doesn't make sense, because the thermal shutdown appears before the firmware has a chance to throttle the ARM core(s). Fix these unwanted shutdowns by increasing the critical trip point to a value which shouldn't be reached with working thermal throttling. Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point") Signed-off-by: Stefan Wahren Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm283x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 3caaa57eb6c8..839491628e87 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -37,7 +37,7 @@ trips { cpu-crit { - temperature = <80000>; + temperature = <90000>; hysteresis = <0>; type = "critical"; }; -- cgit v1.2.3