From f2a0dfefec5fac797a5c6defa7e29db933a67a80 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 25 Sep 2012 19:33:33 +0300 Subject: ARM: OMAP3+: PM: VP: use uV for max and min voltage limits Every PMIC has it's own eccentricities, For example, one of the PMIC has MSB set to 1 for a specific function - voltage enable! using an hardcoded value specific for TWL when copied over to such an implementation causes the system to crash as the MSB bit was 0 and the voltage got disabled!. Instead we use actual values and depend on the convertion routines to abstract out the eccentricities of each PMIC. With this, we can now move the voltages to a common location in voltage.h as they are no longer dependent on PMICs and expect the PMIC's conversion routines to set a cap if the voltage is out of reach for the PMIC. Reported-by: Jon Hunter Signed-off-by: Nishanth Menon Signed-off-by: Vishwanath BS Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index f515a1a056d5..df4e7c38f7c6 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -30,16 +30,6 @@ #define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04 #define OMAP3_VP_VLIMITTO_TIMEOUT_US 200 -#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14 -#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42 -#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18 -#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c - -#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18 -#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c -#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18 -#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30 - #define OMAP4_SRI2C_SLAVE_ADDR 0x12 #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 #define OMAP4_VDD_MPU_SR_CMD_REG 0x56 @@ -53,13 +43,6 @@ #define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 #define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 -#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA -#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39 -#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA -#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D -#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA -#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28 - static bool is_offset_valid; static u8 smps_offset; /* -- cgit v1.2.3 From b254012b21e3f0dec798de8d12e3ce009d1c09e0 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:34 +0300 Subject: ARM: OMAP: voltage: renamed vp_vddmin and vp_vddmax fields These are now called vddmin and vddmax, as these fields will be used globally for selecting voltage ranges for a pmic channel, and not only for voltage processor. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 28 ++++++++++++++-------------- arch/arm/mach-omap2/voltage.h | 4 ++-- arch/arm/mach-omap2/vp.c | 4 ++-- 3 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index df4e7c38f7c6..c38a530a7f47 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -149,8 +149,8 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, - .vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, - .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, + .vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, + .vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, @@ -170,8 +170,8 @@ static struct omap_voltdm_pmic omap3_core_pmic = { .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, - .vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, - .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, + .vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, + .vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, @@ -191,8 +191,8 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, - .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, + .vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, @@ -213,8 +213,8 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, - .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, + .vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, @@ -235,8 +235,8 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, - .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, + .vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, @@ -272,10 +272,10 @@ int __init omap3_twl_init(void) return -ENODEV; if (cpu_is_omap3630()) { - omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; - omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; - omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; - omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; + omap3_mpu_pmic.vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; + omap3_mpu_pmic.vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; + omap3_core_pmic.vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; + omap3_core_pmic.vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; } /* diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 700469561b4d..a3607b83790d 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -136,8 +136,8 @@ struct omap_voltdm_pmic { u8 vp_erroroffset; u8 vp_vstepmin; u8 vp_vstepmax; - u32 vp_vddmin; - u32 vp_vddmax; + u32 vddmin; + u32 vddmax; u8 vp_timeout_us; bool i2c_high_speed; u8 i2c_mcode; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 47c89eba57ca..c7e0507bfbd3 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -58,8 +58,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm) sys_clk_rate = voltdm->sys_clk.rate / 1000; timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; - vddmin = voltdm->pmic->uv_to_vsel(voltdm->pmic->vp_vddmin); - vddmax = voltdm->pmic->uv_to_vsel(voltdm->pmic->vp_vddmax); + vddmin = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmin); + vddmax = voltdm->pmic->uv_to_vsel(voltdm->pmic->vddmax); waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate, 1000 * voltdm->pmic->slew_rate); -- cgit v1.2.3 From 8b5d8c0d718379ce29dad74b4bda8b669fc1f1c2 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:35 +0300 Subject: ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains These new structs will hold the sleep voltage levels (omap_vc_params) and voltage processor min / max voltages (omap_vp_params.) Previously these were part of the PMIC struct, but they do not really belong there, as they are OMAP chip specific, not PMIC specific parameters. voltdm code is also changed to use the new structs. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 20 --------------- arch/arm/mach-omap2/vc.c | 35 ++++++++++++++++++++++++--- arch/arm/mach-omap2/vc.h | 7 ++++++ arch/arm/mach-omap2/vc3xxx_data.c | 22 +++++++++++++++++ arch/arm/mach-omap2/vc44xx_data.c | 28 +++++++++++++++++++++ arch/arm/mach-omap2/voltage.h | 18 +++++++++++--- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 5 ++++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 8 ++++++ arch/arm/mach-omap2/vp.h | 7 ++++++ arch/arm/mach-omap2/vp3xxx_data.c | 10 ++++++++ arch/arm/mach-omap2/vp44xx_data.c | 15 ++++++++++++ 11 files changed, 147 insertions(+), 28 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index c38a530a7f47..dca1d662d5e0 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -141,10 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, - .on_volt = 1200000, - .onlp_volt = 1000000, - .ret_volt = 975000, - .off_volt = 600000, .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, @@ -162,10 +158,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, - .on_volt = 1200000, - .onlp_volt = 1000000, - .ret_volt = 975000, - .off_volt = 600000, .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, @@ -183,10 +175,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1375000, - .onlp_volt = 1375000, - .ret_volt = 830000, - .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -205,10 +193,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1188000, - .onlp_volt = 1188000, - .ret_volt = 830000, - .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -227,10 +211,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1200000, - .onlp_volt = 1200000, - .ret_volt = 830000, - .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b17012..4c3c41fd2637 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -135,6 +135,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); voltdm->write(vc_cmdval, vc->cmdval_reg); + voltdm->vc_param->on = target_volt; + omap_vp_update_errorgain(voltdm, target_volt); return 0; @@ -284,6 +286,30 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) initialized = true; } +/** + * omap_vc_calc_vsel - calculate vsel value for a channel + * @voltdm: channel to calculate value for + * @uvolt: microvolt value to convert to vsel + * + * Converts a microvolt value to vsel value for the used PMIC. + * This checks whether the microvolt value is out of bounds, and + * adjusts the value accordingly. If unsupported value detected, + * warning is thrown. + */ +static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt) +{ + if (voltdm->pmic->vddmin > uvolt) + uvolt = voltdm->pmic->vddmin; + if (voltdm->pmic->vddmax < uvolt) { + WARN(1, "%s: voltage not supported by pmic: %u vs max %u\n", + __func__, uvolt, voltdm->pmic->vddmax); + /* Lets try maximum value anyway */ + uvolt = voltdm->pmic->vddmax; + } + + return voltdm->pmic->uv_to_vsel(uvolt); +} + void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; @@ -335,10 +361,11 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) } /* Set up the on, inactive, retention and off voltage */ - on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt); - onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt); - ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt); - off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt); + on_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->on); + onlp_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->onlp); + ret_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->ret); + off_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->off); + val = ((on_vsel << vc->common->cmd_on_shift) | (onlp_vsel << vc->common->cmd_onlp_shift) | (ret_vsel << vc->common->cmd_ret_shift) | diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 478bf6b432c4..7618b69811d0 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -111,6 +111,13 @@ extern struct omap_vc_channel omap4_vc_mpu; extern struct omap_vc_channel omap4_vc_iva; extern struct omap_vc_channel omap4_vc_core; +extern struct omap_vc_param omap3_mpu_vc_data; +extern struct omap_vc_param omap3_core_vc_data; + +extern struct omap_vc_param omap4_mpu_vc_data; +extern struct omap_vc_param omap4_iva_vc_data; +extern struct omap_vc_param omap4_core_vc_data; + void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 5d8eaf31569c..75bc4aa22b3a 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -71,3 +71,25 @@ struct omap_vc_channel omap3_vc_core = { .smps_cmdra_mask = OMAP3430_CMDRA1_MASK, .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, }; + +/* + * Voltage levels for different operating modes: on, sleep, retention and off + */ +#define OMAP3_ON_VOLTAGE_UV 1200000 +#define OMAP3_ONLP_VOLTAGE_UV 1000000 +#define OMAP3_RET_VOLTAGE_UV 975000 +#define OMAP3_OFF_VOLTAGE_UV 600000 + +struct omap_vc_param omap3_mpu_vc_data = { + .on = OMAP3_ON_VOLTAGE_UV, + .onlp = OMAP3_ONLP_VOLTAGE_UV, + .ret = OMAP3_RET_VOLTAGE_UV, + .off = OMAP3_OFF_VOLTAGE_UV, +}; + +struct omap_vc_param omap3_core_vc_data = { + .on = OMAP3_ON_VOLTAGE_UV, + .onlp = OMAP3_ONLP_VOLTAGE_UV, + .ret = OMAP3_RET_VOLTAGE_UV, + .off = OMAP3_OFF_VOLTAGE_UV, +}; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index d70b930f2739..085e5d6a04fd 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -87,3 +87,31 @@ struct omap_vc_channel omap4_vc_core = { .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT, }; +/* + * Voltage levels for different operating modes: on, sleep, retention and off + */ +#define OMAP4_ON_VOLTAGE_UV 1375000 +#define OMAP4_ONLP_VOLTAGE_UV 1375000 +#define OMAP4_RET_VOLTAGE_UV 837500 +#define OMAP4_OFF_VOLTAGE_UV 0 + +struct omap_vc_param omap4_mpu_vc_data = { + .on = OMAP4_ON_VOLTAGE_UV, + .onlp = OMAP4_ONLP_VOLTAGE_UV, + .ret = OMAP4_RET_VOLTAGE_UV, + .off = OMAP4_OFF_VOLTAGE_UV, +}; + +struct omap_vc_param omap4_iva_vc_data = { + .on = OMAP4_ON_VOLTAGE_UV, + .onlp = OMAP4_ONLP_VOLTAGE_UV, + .ret = OMAP4_RET_VOLTAGE_UV, + .off = OMAP4_OFF_VOLTAGE_UV, +}; + +struct omap_vc_param omap4_core_vc_data = { + .on = OMAP4_ON_VOLTAGE_UV, + .onlp = OMAP4_ONLP_VOLTAGE_UV, + .ret = OMAP4_RET_VOLTAGE_UV, + .off = OMAP4_OFF_VOLTAGE_UV, +}; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index a3607b83790d..697095551bb6 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -74,6 +74,8 @@ struct voltagedomain { const struct omap_vfsm_instance *vfsm; struct omap_vp_instance *vp; struct omap_voltdm_pmic *pmic; + struct omap_vp_param *vp_param; + struct omap_vc_param *vc_param; /* VC/VP register access functions: SoC specific */ u32 (*read) (u8 offset); @@ -125,10 +127,6 @@ struct voltagedomain { struct omap_voltdm_pmic { int slew_rate; int step_size; - u32 on_volt; - u32 onlp_volt; - u32 ret_volt; - u32 off_volt; u16 volt_setup_time; u16 i2c_slave_addr; u16 volt_reg_addr; @@ -145,6 +143,18 @@ struct omap_voltdm_pmic { u8 (*uv_to_vsel) (unsigned long uV); }; +struct omap_vp_param { + u32 vddmax; + u32 vddmin; +}; + +struct omap_vc_param { + u32 on; + u32 onlp; + u32 ret; + u32 off; +}; + void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 63afbfed3cbc..261bb7cb4e60 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -117,6 +117,11 @@ void __init omap3xxx_voltagedomains_init(void) } #endif + omap3_voltdm_mpu.vp_param = &omap3_mpu_vp_data; + omap3_voltdm_core.vp_param = &omap3_core_vp_data; + omap3_voltdm_mpu.vc_param = &omap3_mpu_vc_data; + omap3_voltdm_core.vc_param = &omap3_core_vc_data; + if (soc_is_am35xx()) voltdms = voltagedomains_am35xx; else diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index c3115f6853d4..a2d7d9ca2380 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -106,6 +106,14 @@ void __init omap44xx_voltagedomains_init(void) omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; #endif + omap4_voltdm_mpu.vp_param = &omap4_mpu_vp_data; + omap4_voltdm_iva.vp_param = &omap4_iva_vp_data; + omap4_voltdm_core.vp_param = &omap4_core_vp_data; + + omap4_voltdm_mpu.vc_param = &omap4_mpu_vc_data; + omap4_voltdm_iva.vc_param = &omap4_iva_vc_data; + omap4_voltdm_core.vc_param = &omap4_core_vc_data; + for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7c155d248aa3..0fdf7080e4a6 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -117,6 +117,13 @@ extern struct omap_vp_instance omap4_vp_mpu; extern struct omap_vp_instance omap4_vp_iva; extern struct omap_vp_instance omap4_vp_core; +extern struct omap_vp_param omap3_mpu_vp_data; +extern struct omap_vp_param omap3_core_vp_data; + +extern struct omap_vp_param omap4_mpu_vp_data; +extern struct omap_vp_param omap4_iva_vp_data; +extern struct omap_vp_param omap4_core_vp_data; + void omap_vp_init(struct voltagedomain *voltdm); void omap_vp_enable(struct voltagedomain *voltdm); void omap_vp_disable(struct voltagedomain *voltdm); diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index bd89f80089f5..1914e026245e 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -77,3 +77,13 @@ struct omap_vp_instance omap3_vp_core = { .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, }; + +struct omap_vp_param omap3_mpu_vp_data = { + .vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, + .vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, +}; + +struct omap_vp_param omap3_core_vp_data = { + .vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, + .vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, +}; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 8c031d16879e..e62f6b018beb 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -87,3 +87,18 @@ struct omap_vp_instance omap4_vp_core = { .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, }; + +struct omap_vp_param omap4_mpu_vp_data = { + .vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, +}; + +struct omap_vp_param omap4_iva_vp_data = { + .vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, +}; + +struct omap_vp_param omap4_core_vp_data = { + .vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, + .vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, +}; -- cgit v1.2.3 From 5a84dc5bc5d7d35d3788f4d1a9c928912c3ad41b Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:42 +0300 Subject: ARM: OMAP: TWL: change the vddmin / vddmax voltages to spec As vddmin / vddmax voltages for the pmic only describe the pmic capabilities now, change the voltages to be according to spec. TWL data manuals give following values: TWL4030 (SWCS019L) : VDD1: 600mV ... 1450mV, VDD2: 600mV ... 1500mV TWL5030 (SWCS030E) : VDD1: 600mV ... 1450mV, VDD2: 600mV ... 1500mV TWL6030 (SWCS045A) : 0V ... 2100mV Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index dca1d662d5e0..188f21027c9a 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -145,8 +145,8 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, - .vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN, - .vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, + .vddmin = 600000, + .vddmax = 1450000, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, @@ -162,8 +162,8 @@ static struct omap_voltdm_pmic omap3_core_pmic = { .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, - .vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN, - .vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, + .vddmin = 600000, + .vddmax = 1450000, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, @@ -179,8 +179,8 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, - .vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, + .vddmin = 0, + .vddmax = 2100000, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, @@ -197,8 +197,8 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, - .vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, + .vddmin = 0, + .vddmax = 2100000, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, @@ -215,8 +215,8 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, - .vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, - .vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, + .vddmin = 0, + .vddmax = 2100000, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, @@ -251,13 +251,6 @@ int __init omap3_twl_init(void) if (!cpu_is_omap34xx()) return -ENODEV; - if (cpu_is_omap3630()) { - omap3_mpu_pmic.vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; - omap3_mpu_pmic.vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; - omap3_core_pmic.vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; - omap3_core_pmic.vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; - } - /* * The smartreflex bit on twl4030 specifies if the setting of voltage * is done over the I2C_SR path. Since this setting is independent of -- cgit v1.2.3 From d3965191a4d28fa6eb875c06e5cfaffa5a8aef29 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:46 +0300 Subject: ARM: OMAP3+: voltage: remove unused volt_setup_time parameter This is no longer needed as the ramp times are calculated from voltage deltas + slew rates. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 5 ----- arch/arm/mach-omap2/voltage.h | 1 - 2 files changed, 6 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 188f21027c9a..ecae9890f0f2 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -141,7 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, - .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, @@ -158,7 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, - .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, @@ -175,7 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, .step_size = 12660, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, @@ -193,7 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, .step_size = 12660, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, @@ -211,7 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, .step_size = 12660, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 990c440d5c51..78923f93efde 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -129,7 +129,6 @@ struct voltagedomain { struct omap_voltdm_pmic { int slew_rate; int step_size; - u16 volt_setup_time; u16 i2c_slave_addr; u16 volt_reg_addr; u16 cmd_reg_addr; -- cgit v1.2.3 From 00bd228ea9f7aad23f7933fa62a13d975d4b213a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:48 +0300 Subject: ARM: OMAP4: VC: setup I2C parameters based on board data VC code now provides a table of pre-calculated I2C setup parameters, which will be used based on the capacitance value calculated for the I2C trace on the PCB. A default trace length of 6.3cm is used unless board defines its own value during init. The parameters set will be the I2C internal pull setup and the I2C timing parameters for high speed use mode. Full speed mode is not supported as of now. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 3 + arch/arm/mach-omap2/pm.h | 2 + arch/arm/mach-omap2/vc.c | 149 ++++++++++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/voltage.h | 1 + 4 files changed, 147 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index ecae9890f0f2..611cb63d5ce6 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -183,6 +183,7 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, .i2c_high_speed = true, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -200,6 +201,7 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, .i2c_high_speed = true, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -216,6 +218,7 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, + .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 429028852103..4db7b238a0d5 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -132,9 +132,11 @@ static inline int omap4_twl_init(void) #ifdef CONFIG_PM extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut); extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut); +extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm); #else static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { } static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { } +static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { } #endif #endif diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d72b787a0d83..687aa86c0d5e 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -24,6 +24,7 @@ #include "prm44xx.h" #include "pm.h" #include "scrm44xx.h" +#include "control.h" /** * struct omap_vc_channel_cfg - describe the cfg_channel bitfield @@ -69,6 +70,9 @@ static struct omap_vc_channel_cfg vc_mutant_channel_cfg = { }; static struct omap_vc_channel_cfg *vc_cfg_bits; + +/* Default I2C trace length on pcb, 6.3cm. Used for capacitance calculations. */ +static u32 sr_i2c_pcb_length = 63; #define CFG_CHANNEL_MASK 0x1f /** @@ -464,22 +468,135 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { - static bool is_initialized; - u32 vc_val; - omap4_set_timings(voltdm, true); omap4_set_timings(voltdm, false); +} + +struct i2c_init_data { + u8 loadbits; + u8 load; + u8 hsscll_38_4; + u8 hsscll_26; + u8 hsscll_19_2; + u8 hsscll_16_8; + u8 hsscll_12; +}; + +static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = { + { + .load = 50, + .loadbits = 0x3, + .hsscll_38_4 = 13, + .hsscll_26 = 11, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 25, + .loadbits = 0x2, + .hsscll_38_4 = 13, + .hsscll_26 = 11, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 12, + .loadbits = 0x1, + .hsscll_38_4 = 11, + .hsscll_26 = 10, + .hsscll_19_2 = 9, + .hsscll_16_8 = 9, + .hsscll_12 = 8, + }, + { + .load = 0, + .loadbits = 0x0, + .hsscll_38_4 = 12, + .hsscll_26 = 10, + .hsscll_19_2 = 9, + .hsscll_16_8 = 8, + .hsscll_12 = 8, + }, +}; + +/** + * omap4_vc_i2c_timing_init - sets up board I2C timing parameters + * @voltdm: voltagedomain pointer to get data from + * + * Use PMIC + board supplied settings for calculating the total I2C + * channel capacitance and set the timing parameters based on this. + * Pre-calculated values are provided in data tables, as it is not + * too straightforward to calculate these runtime. + */ +static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) +{ + u32 capacitance; + u32 val; + u16 hsscll; + const struct i2c_init_data *i2c_data; + + if (!voltdm->pmic->i2c_high_speed) { + pr_warn("%s: only high speed supported!\n", __func__); + return; + } - if (is_initialized) + /* PCB trace capacitance, 0.125pF / mm => mm / 8 */ + capacitance = DIV_ROUND_UP(sr_i2c_pcb_length, 8); + + /* OMAP pad capacitance */ + capacitance += 4; + + /* PMIC pad capacitance */ + capacitance += voltdm->pmic->i2c_pad_load; + + /* Search for capacitance match in the table */ + i2c_data = omap4_i2c_timing_data; + + while (i2c_data->load > capacitance) + i2c_data++; + + /* Select proper values based on sysclk frequency */ + switch (voltdm->sys_clk.rate) { + case 38400000: + hsscll = i2c_data->hsscll_38_4; + break; + case 26000000: + hsscll = i2c_data->hsscll_26; + break; + case 19200000: + hsscll = i2c_data->hsscll_19_2; + break; + case 16800000: + hsscll = i2c_data->hsscll_16_8; + break; + case 12000000: + hsscll = i2c_data->hsscll_12; + break; + default: + pr_warn("%s: unsupported sysclk rate: %d!\n", __func__, + voltdm->sys_clk.rate); return; + } + + /* Loadbits define pull setup for the I2C channels */ + val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29; - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + /* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */ + __raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + + OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2)); - is_initialized = true; + /* HSSCLH can always be zero */ + val = hsscll << OMAP4430_HSSCLL_SHIFT; + val |= (0x28 << OMAP4430_SCLL_SHIFT | 0x2c << OMAP4430_SCLH_SHIFT); + + /* Write setup times to I2C config register */ + voltdm->write(val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); } + + /** * omap_vc_i2c_init - initialize I2C interface to PMIC * @voltdm: voltage domain containing VC data @@ -519,6 +636,9 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) mcode << __ffs(vc->common->i2c_mcode_mask), vc->common->i2c_cfg_reg); + if (cpu_is_omap44xx()) + omap4_vc_i2c_timing_init(voltdm); + initialized = true; } @@ -546,6 +666,19 @@ static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt) return voltdm->pmic->uv_to_vsel(uvolt); } +/** + * omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB + * @mm: length of the PCB trace in millimetres + * + * Sets the PCB trace length for the I2C channel. By default uses 63mm. + * This is needed for properly calculating the capacitance value for + * the PCB trace, and for setting the SR I2C channel timing parameters. + */ +void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm) +{ + sr_i2c_pcb_length = mm; +} + void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 78923f93efde..a0ce4f10ff13 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -139,6 +139,7 @@ struct omap_voltdm_pmic { u32 vddmax; u8 vp_timeout_us; bool i2c_high_speed; + u32 i2c_pad_load; u8 i2c_mcode; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); -- cgit v1.2.3 From 83b5b5519c24c2af3e31c723573fbfbf9ba1bbdb Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Sep 2012 19:33:49 +0300 Subject: ARM: OMAP4: TWL: enable high speed mode for PMIC communication With the new parameters, I2C can now be put to high speed mode for better performance. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-omap2/omap_twl.c') diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 611cb63d5ce6..7ff9667d9761 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -218,6 +218,7 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, + .i2c_high_speed = true, .i2c_pad_load = 3, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, -- cgit v1.2.3