From c680b77efe4542830bb170e1cc40db1c47c569bc Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 18 Sep 2006 23:24:52 +0100
Subject: [ARM] 3830/1: iop3xx: board support file cleanup

Revamp the iop3xx board support: move the support code for each iop
board type into its own file, start using platform serial and platform
physmap flash devices, switch to a per-board time tick rate, and get
rid of the ARCH_EP80219 and STEPD config options by doing the relevant
checks at run time.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-iop33x/uart.c | 106 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
 create mode 100644 arch/arm/mach-iop33x/uart.c

(limited to 'arch/arm/mach-iop33x/uart.c')

diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
new file mode 100644
index 000000000000..d221d4abaa87
--- /dev/null
+++ b/arch/arm/mach-iop33x/uart.c
@@ -0,0 +1,106 @@
+/*
+ * linux/arch/arm/mach-iop33x/uart.c
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#define IOP331_UART_XTAL 33334000
+
+static struct plat_serial8250_port iop33x_uart0_data[] = {
+	{
+		.membase	= (char *)IOP331_UART0_VIRT,
+		.mapbase	= IOP331_UART0_PHYS,
+		.irq		= IRQ_IOP331_UART0,
+		.uartclk	= IOP331_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct resource iop33x_uart0_resources[] = {
+	[0] = {
+		.start	= IOP331_UART0_PHYS,
+		.end	= IOP331_UART0_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP331_UART0,
+		.end	= IRQ_IOP331_UART0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device iop33x_uart0_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iop33x_uart0_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart0_resources,
+};
+
+
+static struct resource iop33x_uart1_resources[] = {
+	[0] = {
+		.start	= IOP331_UART1_PHYS,
+		.end	= IOP331_UART1_PHYS + 0x3f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP331_UART1,
+		.end	= IRQ_IOP331_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct plat_serial8250_port iop33x_uart1_data[] = {
+	{
+		.membase	= (char *)IOP331_UART1_VIRT,
+		.mapbase	= IOP331_UART1_PHYS,
+		.irq		= IRQ_IOP331_UART1,
+		.uartclk	= IOP331_UART_XTAL,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+struct platform_device iop33x_uart1_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data		= iop33x_uart1_data,
+	},
+	.num_resources	= 2,
+	.resource	= iop33x_uart1_resources,
+};
-- 
cgit v1.2.3