From c9a8a92a9961dcd822015ee406e1a011b772112e Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Wed, 2 Jan 2019 20:35:52 +0100 Subject: ARM: dts: rockchip: remove qos_cif1 from rk3188 power-domain While the rk3066 does have 2 camera interfaces, the rk3188 does not, so there also isn't a QoS block for that non-existing interface, so remove it. Fixes: e6e1869f0b71 ("ARM: dts: rockchip: add rk3066/rk3188 power-domains") Signed-off-by: Johan Jonker Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 4acb501dd3f8..3ed49898f4b2 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -719,7 +719,6 @@ pm_qos = <&qos_lcdc0>, <&qos_lcdc1>, <&qos_cif0>, - <&qos_cif1>, <&qos_ipp>, <&qos_rga>; }; -- cgit v1.2.3 From d0243693fbf6fbd48b4efb2ba7210765983b03e3 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 15 Jan 2019 10:09:38 -0800 Subject: ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type Commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") started warning about incorrect dts usage for irqs. ARM GIC only supports active-high interrupts for SPI (Shared Peripheral Interrupts), and the Palmas PMIC by default is active-low. Palmas PMIC allows changing the interrupt polarity using register PALMAS_POLARITY_CTRL_INT_POLARITY, but configuring sys_nirq1 with a pull-down and setting PALMAS_POLARITY_CTRL_INT_POLARITY made the Palmas RTC interrupts stop working. This can be easily tested with kernel tools rtctest.c. Turns out the SoC inverts the sys_nirq pins for GIC as they do not go through a peripheral device but go directly to the MPUSS wakeupgen. I've verified this by muxing the interrupt line temporarily to gpio_wk16 instead of sys_nirq1. with a gpio, the interrupt works fine both active-low and active-high with the SoC internal pull configured and palmas polarity configured. But as sys_nirq1, the interrupt only works when configured ACTIVE_LOW for palmas, and ACTIVE_HIGH for GIC. Note that there was a similar issue earlier with tegra114 and palmas interrupt polarity that got fixed by commit df545d1cd01a ("mfd: palmas: Provide irq flags through DT/platform data"). However, the difference between omap5 and tegra114 is that tegra inverts the palmas interrupt twice, once when entering tegra PMC, and again when exiting tegra PMC to GIC. Let's fix the issue by adding a custom wakeupgen_irq_set_type() for wakeupgen and invert any interrupts with wrong polarity. Let's also warn about any non-sysnirq pins using wrong polarity. Note that we also need to update the dts for the level as IRQ_TYPE_NONE never has irq_set_type() called, and let's add some comments and use proper pin nameing to avoid more confusion later on. Cc: Belisko Marek Cc: Dmitry Lifshitz Cc: "Dr. H. Nikolaus Schaller" Cc: Jon Hunter Cc: Keerthy Cc: Laxman Dewangan Cc: Nishanth Menon Cc: Peter Ujfalusi Cc: Richard Woodruff Cc: Santosh Shilimkar Cc: Tero Kristo Cc: Thierry Reding Cc: stable@vger.kernel.org # v4.17+ Reported-by: Belisko Marek Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 9 +++++--- arch/arm/boot/dts/omap5-cm-t54.dts | 12 ++++++++++- arch/arm/mach-omap2/omap-wakeupgen.c | 36 ++++++++++++++++++++++++++++++- 3 files changed, 52 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index bc853ebeda22..61a06f6add3c 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -317,7 +317,8 @@ palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { pinctrl-single,pins = < - OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) >; }; @@ -385,7 +386,8 @@ palmas: palmas@48 { compatible = "ti,palmas"; - interrupts = ; /* IRQ_SYS_1N */ + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = ; reg = <0x48>; interrupt-controller; #interrupt-cells = <2>; @@ -651,7 +653,8 @@ pinctrl-names = "default"; pinctrl-0 = <&twl6040_pins>; - interrupts = ; /* IRQ_SYS_2N cascaded to gic */ + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = ; /* audpwron gpio defined in the board specific dts */ diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 5e21fb430a65..e78d3718f145 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -181,6 +181,13 @@ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */ >; }; + + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + /* sys_nirq1 is pulled down as the SoC is inverting it for GIC */ + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; }; &omap5_pmx_core { @@ -414,8 +421,11 @@ palmas: palmas@48 { compatible = "ti,palmas"; - interrupts = ; /* IRQ_SYS_1N */ reg = <0x48>; + pinctrl-0 = <&palmas_sys_nirq_pins>; + pinctrl-names = "default"; + /* sys_nirq/ext_sys_irq pins get inverted at mpuss wakeupgen */ + interrupts = ; interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index fc5fb776a710..17558be4bf0a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -50,6 +50,9 @@ #define OMAP4_NR_BANKS 4 #define OMAP4_NR_IRQS 128 +#define SYS_NIRQ1_EXT_SYS_IRQ_1 7 +#define SYS_NIRQ2_EXT_SYS_IRQ_2 119 + static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_RAW_SPINLOCK(wakeupgen_lock); @@ -153,6 +156,37 @@ static void wakeupgen_unmask(struct irq_data *d) irq_chip_unmask_parent(d); } +/* + * The sys_nirq pins bypass peripheral modules and are wired directly + * to MPUSS wakeupgen. They get automatically inverted for GIC. + */ +static int wakeupgen_irq_set_type(struct irq_data *d, unsigned int type) +{ + bool inverted = false; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + type &= ~IRQ_TYPE_LEVEL_MASK; + type |= IRQ_TYPE_LEVEL_HIGH; + inverted = true; + break; + case IRQ_TYPE_EDGE_FALLING: + type &= ~IRQ_TYPE_EDGE_BOTH; + type |= IRQ_TYPE_EDGE_RISING; + inverted = true; + break; + default: + break; + } + + if (inverted && d->hwirq != SYS_NIRQ1_EXT_SYS_IRQ_1 && + d->hwirq != SYS_NIRQ2_EXT_SYS_IRQ_2) + pr_warn("wakeupgen: irq%li polarity inverted in dts\n", + d->hwirq); + + return irq_chip_set_type_parent(d, type); +} + #ifdef CONFIG_HOTPLUG_CPU static DEFINE_PER_CPU(u32 [MAX_NR_REG_BANKS], irqmasks); @@ -446,7 +480,7 @@ static struct irq_chip wakeupgen_chip = { .irq_mask = wakeupgen_mask, .irq_unmask = wakeupgen_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, - .irq_set_type = irq_chip_set_type_parent, + .irq_set_type = wakeupgen_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, -- cgit v1.2.3 From 0840242e887586268f665bf58d5e1a7d6ebf35ed Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 22 Jan 2019 08:21:01 -0800 Subject: ARM: dts: Configure clock parent for pwm vibra Commit 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") moved some omap4 timers to probe with ti-sysc interconnect target module. Turns out this broke pwm-omap-dmtimer for reparenting of the timer clock. With ti-sysc, we can now configure the clock sources in the dts with assigned-clocks and assigned-clock-parents. Fixes: 84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe them with ti-sysc") Cc: Bartosz Golaszewski Cc: Daniel Lezcano Cc: H. Nikolaus Schaller Cc: Keerthy Cc: Ladislav Michl Cc: Pavel Machek Cc: Sebastian Reichel Cc: Tero Kristo Cc: Thierry Reding Cc: Thomas Gleixner Reported-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 04758a2a87f0..67d77eee9433 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -644,6 +644,17 @@ }; }; +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_clkin_ck>; +}; + /* * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for * uart1 wakeirq. -- cgit v1.2.3