From 66579e29f7aba7c72146e608efe08c08ea1dc934 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 14 Nov 2016 15:44:07 +0000 Subject: ARM: dts: omap5: replace gpio-key,wakeup with wakeup-source property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: "Benoît Cousson" Signed-off-by: Sudeep Holla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 2fcdc516da45..a8c72611fbe3 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -41,7 +41,7 @@ label = "BTN1"; linux,code = <169>; gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ - gpio-key,wakeup; + wakeup-source; autorepeat; debounce_interval = <50>; }; -- cgit v1.2.3 From a291b6b3d287592da72d463e5e141a2a60e8ee04 Mon Sep 17 00:00:00 2001 From: Jyri Sarha Date: Thu, 17 Nov 2016 22:13:42 +0200 Subject: ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC node Add blue-and-red-wiring -property to LCDC node. Also adds comments on how to get support 24 bit RGB mode. After this patch am335x-boneblack support RGB565, BGR888, and XBGR8888 color formats. See details in Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt. The BBB has straight color wiring from am335x to tda19988, however the tda19988 can be configured to cross the blue and red wires. The comments show how to do that with video-ports property of tda19988 node and how to tell LCDC that blue and red wires are crossed, with blue-and-red-wiring LCDC node property. This changes supported color formats from 16 bit RGB and 24 bit BGR to 16 bit BGR and 24 bit RGB. Signed-off-by: Jyri Sarha Reviewed-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-boneblack.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 6bbb1fee0868..db00d8ef7b19 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -79,6 +79,14 @@ &lcdc { status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + port { lcdc_0: endpoint@0 { remote-endpoint = <&hdmi_0>; @@ -95,6 +103,9 @@ pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + #sound-dai-cells = <0>; audio-ports = < TDA998x_I2S 0x03>; -- cgit v1.2.3 From 3c558b3289e83a2010de99b60df3d36b93609c99 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:22 -0500 Subject: ARM: dts: am335x-icev2: Add Industrial input support The SN65HVS882 is available on the AM335x-ICEv2 and is attached to SPI0. Input is attached to the I/O header. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 85e04c205542..d46efc6a0772 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -187,6 +187,8 @@ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ >; }; @@ -224,6 +226,24 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_default>; + + sn65hvs882@1 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + + reg = <1>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + #include "tps65910.dtsi" &tps { -- cgit v1.2.3 From 722cb0fa07918bf0c77cb05b9cf52d7ee0ca8b5c Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:23 -0500 Subject: ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming The LEDs tied to the Industrial I/O output pins are meant for providing status feed-back and are not the primary use for the pins. Disable this use by default. Also unify the LED naming across IDK platforms. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index d46efc6a0772..fa3f5dc4ffa0 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -43,52 +43,52 @@ enable-active-high; }; - leds0 { + leds-iio { + status = "disabled"; compatible = "gpio-leds"; - - led0 { + led-out0 { label = "out0"; gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led1 { + led-out1 { label = "out1"; gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led2 { + led-out2 { label = "out2"; gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led3 { + led-out3 { label = "out3"; gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led4 { + led-out4 { label = "out4"; gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led5 { + led-out5 { label = "out5"; gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led6 { + led-out6 { label = "out6"; gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led7 { + led-out7 { label = "out7"; gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; default-state = "off"; -- cgit v1.2.3 From a59c2238d62b079c7ba9b072dcc258f274950542 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:24 -0500 Subject: ARM: dts: am335x-icev2: Add ADC support 7 of the 8 ADC inputs on the am335x are connected to the Industrial I/O header, add this here. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-icev2.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index fa3f5dc4ffa0..1463df3b5b19 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -244,6 +244,13 @@ }; }; +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <1 2 3 4 5 6 7>; + }; +}; + #include "tps65910.dtsi" &tps { -- cgit v1.2.3 From a2f8ad59881f26625478027074ec24f0af1525d2 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:25 -0500 Subject: ARM: dts: am437x-idk: Add Industrial input support The SN65HVS882 is available on the AM437x IDK and is attached to SPI1. Input is attached to the I/O header. Signed-off-by: Andrew F. Davis Reviewed-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-idk-evm.dts | 42 ++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 25ce611c6568..fff7ef6661a7 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -178,6 +178,24 @@ >; }; + spi1_pins_default: spi1_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2) /* mii1_col.spi1_sclk */ + AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2) /* mii1_rx_er.spi1_d1 */ + AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2) /* rmii1_ref_clk.spi1_cs0 */ + AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7) /* mii1_crs.gpio3_1 */ + >; + }; + + spi1_pins_sleep: spi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ @@ -292,6 +310,26 @@ clock-frequency = <100000>; }; +&spi1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_default>; + pinctrl-1 = <&spi1_pins_sleep>; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + &epwmss0 { status = "okay"; }; @@ -310,6 +348,10 @@ status = "okay"; }; +&gpio3 { + status = "okay"; +}; + &gpio4 { status = "okay"; }; -- cgit v1.2.3 From c0a0ee4693511643a4ebab949a97d6e79508b06d Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:26 -0500 Subject: ARM: dts: am437x-idk: Add Industrial output support The TPIC2810 is available on the AM437x IDK and is attached to I2C1. Output is attached to the I/O header and 10 LEDs. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-idk-evm.dts | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index fff7ef6661a7..b76a7c0264a5 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -117,6 +117,58 @@ compatible = "fixed-clock"; clock-frequency = <32768>; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &am43xx_pinmux { @@ -308,6 +360,13 @@ pinctrl-0 = <&i2c2_pins_default>; pinctrl-1 = <&i2c2_pins_sleep>; clock-frequency = <100000>; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &spi1 { -- cgit v1.2.3 From 8b43764f5d6859c6da9ee140b8b6f0d8c378064e Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:27 -0500 Subject: ARM: dts: am57xx-idk: Add Industrial input support The SN65HVS882 is available on both the AM572x and AM571x IDKs and is attached to SPI1. Input is attached to the I/O header. The load trigger is attached to GPIO3_19 on the AM572x IDK. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am572x-idk.dts | 4 ++++ arch/arm/boot/dts/am57xx-idk-common.dtsi | 15 +++++++++++++++ 2 files changed, 19 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index 87bbc66f0f21..27d9149cedba 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -83,3 +83,7 @@ bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */ }; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 03cec62260e1..438076e23a55 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -253,6 +253,21 @@ }; }; +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH -- cgit v1.2.3 From 50e95b6b854cf4c996d3b91ef3f19d779a2a7020 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 7 Oct 2016 09:44:28 -0500 Subject: ARM: dts: am57xx-idk: Add Industrial output support The TPIC2810 is available on both the AM571x and the AM572x IDKs and is attached to I2C1. Output is attached to the I/O header and 10 LEDs. Signed-off-by: Andrew F. Davis Signed-off-by: Sekhar Nori Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 59 ++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 438076e23a55..35e210ce68a1 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -43,6 +43,58 @@ regulator-always-on; regulator-boot-on; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &i2c1 { @@ -266,6 +318,13 @@ spi-max-frequency = <1000000>; spi-cpol; }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &uart3 { -- cgit v1.2.3 From 1f166499ce006b3770a3166122eda64e160736ab Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 10 Nov 2016 10:39:19 +0530 Subject: ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property The PMICs have POWERHOLD set by default which prevents PMIC shutdown even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority. So to enable pmic power off this property lets one over ride the default value and enable pmic power off. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 6df7829a2c15..78bee26361f1 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -204,6 +204,7 @@ interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; -- cgit v1.2.3 From 8804755bfb1f3cbc003e4ebe99eac491672f354c Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 10 Nov 2016 10:39:20 +0530 Subject: ARM: dts: am57xx-idk-common: Add overide powerhold property The PMICs have POWERHOLD set by default which prevents PMIC shutdown even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority. So to enable pmic power off this property lets one over ride the default value and enable pmic power off. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-idk-common.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 35e210ce68a1..555ae21f2b9a 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -109,6 +109,7 @@ #interrupt-cells = <2>; interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; -- cgit v1.2.3 From f5c59d165af1238d097f23f458b2c5d96a5e7d66 Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Wed, 23 Nov 2016 16:49:26 +0100 Subject: ARM: dts: am335x-baltos: use phy-phandle declarations phy-phandle is now a preferred method to reference a PHY device. Especially in regards to cpsw it enables PHY specific settings like max-speed etc. being specified in DTS. Signed-off-by: Yegor Yefremov Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos-ir2110.dts | 10 ++++++++-- arch/arm/boot/dts/am335x-baltos-ir3220.dts | 2 +- arch/arm/boot/dts/am335x-baltos-ir5221.dts | 2 +- arch/arm/boot/dts/am335x-baltos.dtsi | 5 ++++- 4 files changed, 14 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index a9a97307d66c..501c7527121b 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -54,16 +54,22 @@ dr_mode = "host"; }; +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index fe002a17c04b..19f53b8569e1 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -109,9 +109,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index f599350dd305..2b9d7f4db23f 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -127,9 +127,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 09b954154e6b..efb5eae290a8 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -364,11 +364,14 @@ }; &davinci_mdio { + status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; + phy1: ethernet-phy@1 { + reg = <7>; + }; }; &mmc1 { -- cgit v1.2.3 From 5817430ba7250cfc5a9c4a397935b07da16c9762 Mon Sep 17 00:00:00 2001 From: Schuyler Patton Date: Tue, 22 Nov 2016 09:47:32 +0530 Subject: ARM: dts: AM571x-IDK Initial Support The AM571x-IDK board is a board based on TI's AM5718 SOC which has a single core 1.5GHz A15 processor. This board is a development platform for the Industrial market with: - 1GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5718 Initial support is only for basic peripherals. Signed-off-by: Schuyler Patton Signed-off-by: Nishanth Menon Signed-off-by: Dave Gerlach Signed-off-by: Lokesh Vutla Acked-by: Rob Herring Signed-off-by: Tony Lindgren --- .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am571x-idk.dts | 81 ++++++++++++++++++++++ 3 files changed, 85 insertions(+) create mode 100644 arch/arm/boot/dts/am571x-idk.dts (limited to 'arch/arm/boot/dts') diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index f53e2ee65e35..6cf680ed8290 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -175,6 +175,9 @@ Boards: - AM5728 IDK compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" +- AM5718 IDK + compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 28df93f92701..02a0b1d01d95 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -589,6 +589,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am571x-idk.dtb \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts new file mode 100644 index 000000000000..d6e43e5184c1 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" +#include +#include +#include "am57xx-idk-common.dtsi" + +/ { + model = "TI AM5718 IDK"; + compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + usr1-led { + label = "status1:red:usr"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + usr2-led { + label = "status1:green:usr"; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; -- cgit v1.2.3