From cb2d956dd329caa11b5ece454dc52253aa038e73 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Mon, 17 Feb 2014 16:52:35 +0200 Subject: cfg80211: refactor cfg80211_can_use_iftype_chan() Separate the code that counts the interface types and channels from the code that check the interface combinations. The new function that checks for combinations is exported so it can be called by the drivers. This is done in preparation for moving the interface combinations checks out of cfg80211. Signed-off-by: Luciano Coelho Signed-off-by: Johannes Berg --- Documentation/DocBook/80211.tmpl | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index 044b76436e83..d9b9416c989f 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -100,6 +100,7 @@ !Finclude/net/cfg80211.h wdev_priv !Finclude/net/cfg80211.h ieee80211_iface_limit !Finclude/net/cfg80211.h ieee80211_iface_combination +!Finclude/net/cfg80211.h cfg80211_check_combinations Actions and configuration -- cgit v1.2.3 From a1a8b4594f8d30e650dad19832e17552219e5694 Mon Sep 17 00:00:00 2001 From: Clement Perrochaud Date: Wed, 2 Apr 2014 09:03:27 +0000 Subject: NFC: pn544: i2c: Add DTS Documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Describe the properties used by the PN544 NFC controller driver. Signed-off-by: Clément Perrochaud Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/net/nfc/pn544.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt new file mode 100644 index 000000000000..dab69f36167c --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/pn544.txt @@ -0,0 +1,35 @@ +* NXP Semiconductors PN544 NFC Controller + +Required properties: +- compatible: Should be "nxp,pn544-i2c". +- clock-frequency: IC work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- enable-gpios: Output GPIO pin used for enabling/disabling the PN544 +- firmware-gpios: Output GPIO pin used to enter firmware download mode + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with PN544 on I2C2): + +&i2c2 { + + status = "okay"; + + pn544: pn544@28 { + + compatible = "nxp,pn544-i2c"; + + reg = <0x28>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio1>; + interrupts = <17 GPIO_ACTIVE_HIGH>; + + enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + }; +}; -- cgit v1.2.3 From 3b82637813a9ea9f79ac6315341c59bfe408bf11 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 25 Mar 2014 08:54:41 -0700 Subject: NFC: trf7970a: Document the 'autosuspend-delay' DTS property The trf7970a driver recently had support added for the 'autosuspend-delay' property so document it. Signed-off-by: Mark A. Greer Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 8dd3ef7bc56b..1e436133685f 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -12,6 +12,7 @@ Required properties: Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- autosuspend-delay: Specify autosuspend delay in milliseconds. Example (for ARM-based BeagleBone with TRF7970A on SPI1): @@ -29,6 +30,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>, <&gpio2 5 GPIO_ACTIVE_LOW>; vin-supply = <&ldo3_reg>; + autosuspend-delay = <30000>; status = "okay"; }; }; -- cgit v1.2.3 From f9b0e251dfbf2c4da642ec9210db29a7ac63b81a Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Wed, 2 Apr 2014 12:29:46 +0200 Subject: drm: make mode_valid callback optional Many drm connectors do not need mode validation. The patch makes this callback optional and removes dumb implementations. v2: Rebase: - imx move to a shared (but still dummy) ->mode_valid implementation. - probe helpers have been extracted to drm_probe_helper.c Signed-off-by: Andrzej Hajda (v1) Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 6 +++--- drivers/gpu/drm/ast/ast_mode.c | 7 ------- drivers/gpu/drm/bridge/ptn3460.c | 7 ------- drivers/gpu/drm/cirrus/cirrus_mode.c | 8 -------- drivers/gpu/drm/drm_probe_helper.c | 2 +- drivers/gpu/drm/exynos/exynos_dp_core.c | 7 ------- drivers/gpu/drm/exynos/exynos_drm_dpi.c | 7 ------- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 7 ------- drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c | 7 ------- drivers/gpu/drm/rcar-du/rcar_du_vgacon.c | 7 ------- drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 7 ------- drivers/staging/imx-drm/imx-drm-core.c | 7 ------- drivers/staging/imx-drm/imx-drm.h | 2 -- drivers/staging/imx-drm/imx-hdmi.c | 1 - drivers/staging/imx-drm/imx-ldb.c | 1 - drivers/staging/imx-drm/imx-tve.c | 4 ---- drivers/staging/imx-drm/parallel-display.c | 1 - include/drm/drm_crtc_helper.h | 2 +- 18 files changed, 5 insertions(+), 85 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 677a02553ec0..c72e146e58d3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -1903,8 +1903,8 @@ void intel_crt_init(struct drm_device *dev) The function filters out modes larger than max_width and max_height - if specified. It then calls the connector - mode_valid helper operation for each mode in + if specified. It then calls the optional connector + mode_valid helper operation for each mode in the probed list to check whether the mode is valid for the connector. @@ -2265,7 +2265,7 @@ void intel_crt_init(struct drm_device *dev) Verify whether a mode is valid for the connector. Return MODE_OK for supported modes and one of the enum drm_mode_status values (MODE_*) - for unsupported modes. This operation is mandatory. + for unsupported modes. This operation is optional. As the mode rejection reason is currently not used beside for diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index a4afdc8bb578..e599d64a2620 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -743,12 +743,6 @@ static int ast_get_modes(struct drm_connector *connector) return 0; } -static int ast_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static void ast_connector_destroy(struct drm_connector *connector) { struct ast_connector *ast_connector = to_ast_connector(connector); @@ -765,7 +759,6 @@ ast_connector_detect(struct drm_connector *connector, bool force) } static const struct drm_connector_helper_funcs ast_connector_helper_funcs = { - .mode_valid = ast_mode_valid, .get_modes = ast_get_modes, .best_encoder = ast_best_single_encoder, }; diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c index b171901a3553..98fd17ae4916 100644 --- a/drivers/gpu/drm/bridge/ptn3460.c +++ b/drivers/gpu/drm/bridge/ptn3460.c @@ -225,12 +225,6 @@ out: return num_modes; } -static int ptn3460_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector) { struct ptn3460_bridge *ptn_bridge; @@ -242,7 +236,6 @@ struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector) struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = { .get_modes = ptn3460_get_modes, - .mode_valid = ptn3460_mode_valid, .best_encoder = ptn3460_best_encoder, }; diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index f59433b7610c..49332c5fe35b 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -505,13 +505,6 @@ static int cirrus_vga_get_modes(struct drm_connector *connector) return count; } -static int cirrus_vga_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - /* Any mode we've added is valid */ - return MODE_OK; -} - static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector *connector) { @@ -546,7 +539,6 @@ static void cirrus_connector_destroy(struct drm_connector *connector) struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = { .get_modes = cirrus_vga_get_modes, - .mode_valid = cirrus_vga_mode_valid, .best_encoder = cirrus_connector_best_encoder, }; diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index e70f54d4a581..d06340985a72 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -169,7 +169,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector, drm_mode_validate_flag(connector, mode_flags); list_for_each_entry(mode, &connector->modes, head) { - if (mode->status == MODE_OK) + if (mode->status == MODE_OK && connector_funcs->mode_valid) mode->status = connector_funcs->mode_valid(connector, mode); } diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index aed533bbfd31..bb74472b4e4b 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -949,12 +949,6 @@ static int exynos_dp_get_modes(struct drm_connector *connector) return 1; } -static int exynos_dp_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static struct drm_encoder *exynos_dp_best_encoder( struct drm_connector *connector) { @@ -965,7 +959,6 @@ static struct drm_encoder *exynos_dp_best_encoder( static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = { .get_modes = exynos_dp_get_modes, - .mode_valid = exynos_dp_mode_valid, .best_encoder = exynos_dp_best_encoder, }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_dpi.c b/drivers/gpu/drm/exynos/exynos_drm_dpi.c index 2b09c7c0bfcc..82e52c71bccc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dpi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dpi.c @@ -94,12 +94,6 @@ static int exynos_dpi_get_modes(struct drm_connector *connector) return 0; } -static int exynos_dpi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static struct drm_encoder * exynos_dpi_best_encoder(struct drm_connector *connector) { @@ -110,7 +104,6 @@ exynos_dpi_best_encoder(struct drm_connector *connector) static struct drm_connector_helper_funcs exynos_dpi_connector_helper_funcs = { .get_modes = exynos_dpi_get_modes, - .mode_valid = exynos_dpi_mode_valid, .best_encoder = exynos_dpi_best_encoder, }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 7afead9c3f30..b6980865dd50 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -533,12 +533,6 @@ static int vidi_get_modes(struct drm_connector *connector) return drm_add_edid_modes(connector, edid); } -static int vidi_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector) { struct vidi_context *ctx = ctx_from_connector(connector); @@ -548,7 +542,6 @@ static struct drm_encoder *vidi_best_encoder(struct drm_connector *connector) static struct drm_connector_helper_funcs vidi_connector_helper_funcs = { .get_modes = vidi_get_modes, - .mode_valid = vidi_mode_valid, .best_encoder = vidi_best_encoder, }; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c index 4f3ba93cd91d..289048d1c7b2 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c @@ -57,15 +57,8 @@ static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector) return 1; } -static int rcar_du_lvds_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static const struct drm_connector_helper_funcs connector_helper_funcs = { .get_modes = rcar_du_lvds_connector_get_modes, - .mode_valid = rcar_du_lvds_connector_mode_valid, .best_encoder = rcar_du_connector_best_encoder, }; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c index 41d563adfeaa..ccfe64c7188f 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vgacon.c @@ -25,15 +25,8 @@ static int rcar_du_vga_connector_get_modes(struct drm_connector *connector) return 0; } -static int rcar_du_vga_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static const struct drm_connector_helper_funcs connector_helper_funcs = { .get_modes = rcar_du_vga_connector_get_modes, - .mode_valid = rcar_du_vga_connector_mode_valid, .best_encoder = rcar_du_connector_best_encoder, }; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index e9e5e6d368cc..faf176b2daf9 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -674,12 +674,6 @@ static int shmob_drm_connector_get_modes(struct drm_connector *connector) return 1; } -static int shmob_drm_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} - static struct drm_encoder * shmob_drm_connector_best_encoder(struct drm_connector *connector) { @@ -690,7 +684,6 @@ shmob_drm_connector_best_encoder(struct drm_connector *connector) static const struct drm_connector_helper_funcs connector_helper_funcs = { .get_modes = shmob_drm_connector_get_modes, - .mode_valid = shmob_drm_connector_mode_valid, .best_encoder = shmob_drm_connector_best_encoder, }; diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c index 4144a75e5f71..53ff005245c5 100644 --- a/drivers/staging/imx-drm/imx-drm-core.c +++ b/drivers/staging/imx-drm/imx-drm-core.c @@ -200,13 +200,6 @@ static const struct file_operations imx_drm_driver_fops = { .llseek = noop_llseek, }; -int imx_drm_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - return MODE_OK; -} -EXPORT_SYMBOL(imx_drm_connector_mode_valid); - void imx_drm_connector_destroy(struct drm_connector *connector) { drm_sysfs_connector_remove(connector); diff --git a/drivers/staging/imx-drm/imx-drm.h b/drivers/staging/imx-drm/imx-drm.h index a322bac55414..7453ae00c412 100644 --- a/drivers/staging/imx-drm/imx-drm.h +++ b/drivers/staging/imx-drm/imx-drm.h @@ -50,8 +50,6 @@ int imx_drm_encoder_get_mux_id(struct device_node *node, int imx_drm_encoder_parse_of(struct drm_device *drm, struct drm_encoder *encoder, struct device_node *np); -int imx_drm_connector_mode_valid(struct drm_connector *connector, - struct drm_display_mode *mode); void imx_drm_connector_destroy(struct drm_connector *connector); void imx_drm_encoder_destroy(struct drm_encoder *encoder); diff --git a/drivers/staging/imx-drm/imx-hdmi.c b/drivers/staging/imx-drm/imx-hdmi.c index d47dedd2cdb4..9fbe6d6a989d 100644 --- a/drivers/staging/imx-drm/imx-hdmi.c +++ b/drivers/staging/imx-drm/imx-hdmi.c @@ -1492,7 +1492,6 @@ static struct drm_connector_funcs imx_hdmi_connector_funcs = { static struct drm_connector_helper_funcs imx_hdmi_connector_helper_funcs = { .get_modes = imx_hdmi_connector_get_modes, - .mode_valid = imx_drm_connector_mode_valid, .best_encoder = imx_hdmi_connector_best_encoder, }; diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c index fe4c1ef4e7a5..7e3f019d7e72 100644 --- a/drivers/staging/imx-drm/imx-ldb.c +++ b/drivers/staging/imx-drm/imx-ldb.c @@ -317,7 +317,6 @@ static struct drm_connector_funcs imx_ldb_connector_funcs = { static struct drm_connector_helper_funcs imx_ldb_connector_helper_funcs = { .get_modes = imx_ldb_connector_get_modes, .best_encoder = imx_ldb_connector_best_encoder, - .mode_valid = imx_drm_connector_mode_valid, }; static struct drm_encoder_funcs imx_ldb_encoder_funcs = { diff --git a/drivers/staging/imx-drm/imx-tve.c b/drivers/staging/imx-drm/imx-tve.c index 575533f4fd64..5a5a5287a86a 100644 --- a/drivers/staging/imx-drm/imx-tve.c +++ b/drivers/staging/imx-drm/imx-tve.c @@ -251,10 +251,6 @@ static int imx_tve_connector_mode_valid(struct drm_connector *connector, unsigned long rate; int ret; - ret = imx_drm_connector_mode_valid(connector, mode); - if (ret != MODE_OK) - return ret; - /* pixel clock with 2x oversampling */ rate = clk_round_rate(tve->clk, 2000UL * mode->clock) / 2000; if (rate == mode->clock) diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c index c60b6c645f42..52598e489a4b 100644 --- a/drivers/staging/imx-drm/parallel-display.c +++ b/drivers/staging/imx-drm/parallel-display.c @@ -148,7 +148,6 @@ static struct drm_connector_funcs imx_pd_connector_funcs = { static struct drm_connector_helper_funcs imx_pd_connector_helper_funcs = { .get_modes = imx_pd_connector_get_modes, .best_encoder = imx_pd_connector_best_encoder, - .mode_valid = imx_drm_connector_mode_valid, }; static struct drm_encoder_funcs imx_pd_encoder_funcs = { diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 36a5febac2a6..7ffb59232e84 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -114,7 +114,7 @@ struct drm_encoder_helper_funcs { /** * drm_connector_helper_funcs - helper operations for connectors * @get_modes: get mode list for this connector - * @mode_valid: is this mode valid on the given connector? + * @mode_valid (optional): is this mode valid on the given connector? * * The helper operations are called by the mid-layer CRTC helper. */ -- cgit v1.2.3 From 4cd3675ebf74d7f559038ded6aa8088e4099a83d Mon Sep 17 00:00:00 2001 From: Chema Gonzalez Date: Mon, 21 Apr 2014 09:21:24 -0700 Subject: filter: added BPF random opcode Added a new ancillary load (bpf call in eBPF parlance) that produces a 32-bit random number. We are implementing it as an ancillary load (instead of an ISA opcode) because (a) it is simpler, (b) allows easy JITing, and (c) seems more in line with generic ISAs that do not have "get a random number" as a instruction, but as an OS call. The main use for this ancillary load is to perform random packet sampling. Signed-off-by: Chema Gonzalez Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 13 +++++++++++++ include/linux/filter.h | 1 + include/uapi/linux/filter.h | 3 ++- net/core/filter.c | 12 ++++++++++++ tools/net/bpf_exp.l | 1 + tools/net/bpf_exp.y | 11 ++++++++++- 6 files changed, 39 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 81f940f4e884..82e1cb0b3da8 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -281,6 +281,7 @@ Possible BPF extensions are shown in the following table: cpu raw_smp_processor_id() vlan_tci vlan_tx_tag_get(skb) vlan_pr vlan_tx_tag_present(skb) + rand prandom_u32() These extensions can also be prefixed with '#'. Examples for low-level BPF: @@ -308,6 +309,18 @@ Examples for low-level BPF: ret #-1 drop: ret #0 +** icmp random packet sampling, 1 in 4 + ldh [12] + jne #0x800, drop + ldb [23] + jneq #1, drop + # get a random uint32 number + ld rand + mod #4 + jneq #1, drop + ret #-1 + drop: ret #0 + ** SECCOMP filter example: ld [4] /* offsetof(struct seccomp_data, arch) */ diff --git a/include/linux/filter.h b/include/linux/filter.h index 024fd03e5d18..759abf78dd61 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -223,6 +223,7 @@ enum { BPF_S_ANC_VLAN_TAG, BPF_S_ANC_VLAN_TAG_PRESENT, BPF_S_ANC_PAY_OFFSET, + BPF_S_ANC_RANDOM, }; #endif /* __LINUX_FILTER_H__ */ diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 8eb9ccaa5b48..253b4d42cf2b 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -130,7 +130,8 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_VLAN_TAG 44 #define SKF_AD_VLAN_TAG_PRESENT 48 #define SKF_AD_PAY_OFFSET 52 -#define SKF_AD_MAX 56 +#define SKF_AD_RANDOM 56 +#define SKF_AD_MAX 60 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/net/core/filter.c b/net/core/filter.c index cd58614660cf..78a636e60a0b 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -643,6 +643,12 @@ static u64 __get_raw_cpu_id(u64 ctx, u64 A, u64 X, u64 r4, u64 r5) return raw_smp_processor_id(); } +/* note that this only generates 32-bit random numbers */ +static u64 __get_random_u32(u64 ctx, u64 A, u64 X, u64 r4, u64 r5) +{ + return (u64)prandom_u32(); +} + /* Register mappings for user programs. */ #define A_REG 0 #define X_REG 7 @@ -779,6 +785,7 @@ static bool convert_bpf_extensions(struct sock_filter *fp, case SKF_AD_OFF + SKF_AD_NLATTR: case SKF_AD_OFF + SKF_AD_NLATTR_NEST: case SKF_AD_OFF + SKF_AD_CPU: + case SKF_AD_OFF + SKF_AD_RANDOM: /* arg1 = ctx */ insn->code = BPF_ALU64 | BPF_MOV | BPF_X; insn->a_reg = ARG1_REG; @@ -812,6 +819,9 @@ static bool convert_bpf_extensions(struct sock_filter *fp, case SKF_AD_OFF + SKF_AD_CPU: insn->imm = __get_raw_cpu_id - __bpf_call_base; break; + case SKF_AD_OFF + SKF_AD_RANDOM: + insn->imm = __get_random_u32 - __bpf_call_base; + break; } break; @@ -1362,6 +1372,7 @@ int sk_chk_filter(struct sock_filter *filter, unsigned int flen) ANCILLARY(VLAN_TAG); ANCILLARY(VLAN_TAG_PRESENT); ANCILLARY(PAY_OFFSET); + ANCILLARY(RANDOM); } /* ancillary operation unknown or unsupported */ @@ -1746,6 +1757,7 @@ void sk_decode_filter(struct sock_filter *filt, struct sock_filter *to) [BPF_S_ANC_VLAN_TAG] = BPF_LD|BPF_B|BPF_ABS, [BPF_S_ANC_VLAN_TAG_PRESENT] = BPF_LD|BPF_B|BPF_ABS, [BPF_S_ANC_PAY_OFFSET] = BPF_LD|BPF_B|BPF_ABS, + [BPF_S_ANC_RANDOM] = BPF_LD|BPF_B|BPF_ABS, [BPF_S_LD_W_LEN] = BPF_LD|BPF_W|BPF_LEN, [BPF_S_LD_W_IND] = BPF_LD|BPF_W|BPF_IND, [BPF_S_LD_H_IND] = BPF_LD|BPF_H|BPF_IND, diff --git a/tools/net/bpf_exp.l b/tools/net/bpf_exp.l index bf7be77ddd62..833a96611da6 100644 --- a/tools/net/bpf_exp.l +++ b/tools/net/bpf_exp.l @@ -92,6 +92,7 @@ extern void yyerror(const char *str); "#"?("cpu") { return K_CPU; } "#"?("vlan_tci") { return K_VLANT; } "#"?("vlan_pr") { return K_VLANP; } +"#"?("rand") { return K_RAND; } ":" { return ':'; } "," { return ','; } diff --git a/tools/net/bpf_exp.y b/tools/net/bpf_exp.y index d15efc989ef5..e6306c51c26f 100644 --- a/tools/net/bpf_exp.y +++ b/tools/net/bpf_exp.y @@ -56,7 +56,7 @@ static void bpf_set_jmp_label(char *label, enum jmp_type type); %token OP_LDXI %token K_PKT_LEN K_PROTO K_TYPE K_NLATTR K_NLATTR_NEST K_MARK K_QUEUE K_HATYPE -%token K_RXHASH K_CPU K_IFIDX K_VLANT K_VLANP K_POFF +%token K_RXHASH K_CPU K_IFIDX K_VLANT K_VLANP K_POFF K_RAND %token ':' ',' '[' ']' '(' ')' 'x' 'a' '+' 'M' '*' '&' '#' '%' @@ -164,6 +164,9 @@ ldb | OP_LDB K_POFF { bpf_set_curr_instr(BPF_LD | BPF_B | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_PAY_OFFSET); } + | OP_LDB K_RAND { + bpf_set_curr_instr(BPF_LD | BPF_B | BPF_ABS, 0, 0, + SKF_AD_OFF + SKF_AD_RANDOM); } ; ldh @@ -212,6 +215,9 @@ ldh | OP_LDH K_POFF { bpf_set_curr_instr(BPF_LD | BPF_H | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_PAY_OFFSET); } + | OP_LDH K_RAND { + bpf_set_curr_instr(BPF_LD | BPF_H | BPF_ABS, 0, 0, + SKF_AD_OFF + SKF_AD_RANDOM); } ; ldi @@ -265,6 +271,9 @@ ld | OP_LD K_POFF { bpf_set_curr_instr(BPF_LD | BPF_W | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_PAY_OFFSET); } + | OP_LD K_RAND { + bpf_set_curr_instr(BPF_LD | BPF_W | BPF_ABS, 0, 0, + SKF_AD_OFF + SKF_AD_RANDOM); } | OP_LD 'M' '[' number ']' { bpf_set_curr_instr(BPF_LD | BPF_MEM, 0, 0, $4); } | OP_LD '[' 'x' '+' number ']' { -- cgit v1.2.3 From bb0f1b5c1695b4399cfd2359c114ae63edbb3ad8 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 3 Nov 2013 21:09:27 +0100 Subject: drm: pass the irq explicitly to drm_irq_install Unfortunately this requires a drm-wide change, and I didn't see a sane way around that. Luckily it's fairly simple, we just need to inline the respective get_irq implementation from either drm_pci.c or drm_platform.c. With that we can now also remove drm_dev_to_irq from drm_irq.c. Reviewed-by: Thierry Reding Reviewed-by: Laurent Pinchart Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 10 +--------- drivers/gpu/drm/armada/armada_drv.c | 2 +- drivers/gpu/drm/drm_irq.c | 13 +++---------- drivers/gpu/drm/gma500/psb_drv.c | 2 +- drivers/gpu/drm/i915/i915_dma.c | 2 +- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/qxl/qxl_irq.c | 2 +- drivers/gpu/drm/radeon/radeon_irq_kms.c | 2 +- drivers/gpu/drm/shmobile/shmob_drm_drv.c | 2 +- drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 +- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +- include/drm/drmP.h | 2 +- 14 files changed, 17 insertions(+), 32 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 677a02553ec0..83dd0b043c28 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -341,14 +341,6 @@ char *date; Managed IRQ Registration - - Both the drm_irq_install and - drm_irq_uninstall functions get the device IRQ by - calling drm_dev_to_irq. This inline function will - call a bus-specific operation to retrieve the IRQ number. For platform - devices, platform_get_irq(..., 0) is used to - retrieve the IRQ number. - drm_irq_install starts by calling the irq_preinstall driver operation. The operation @@ -356,7 +348,7 @@ char *date; clearing all pending interrupt flags or disabling the interrupt. - The IRQ will then be requested by a call to + The passed-in IRQ will then be requested by a call to request_irq. If the DRIVER_IRQ_SHARED driver feature flag is set, a shared (IRQF_SHARED) IRQ handler will be requested. diff --git a/drivers/gpu/drm/armada/armada_drv.c b/drivers/gpu/drm/armada/armada_drv.c index 32982da82694..567cfbde0883 100644 --- a/drivers/gpu/drm/armada/armada_drv.c +++ b/drivers/gpu/drm/armada/armada_drv.c @@ -173,7 +173,7 @@ static int armada_drm_load(struct drm_device *dev, unsigned long flags) if (ret) goto err_kms; - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0)); if (ret) goto err_kms; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index cbf6f259bfe4..de38bc9b6581 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -233,11 +233,6 @@ static void drm_irq_vgaarb_nokms(void *cookie, bool state) } } -static inline int drm_dev_to_irq(struct drm_device *dev) -{ - return dev->driver->bus->get_irq(dev); -} - /** * Install IRQ handler. * @@ -247,14 +242,12 @@ static inline int drm_dev_to_irq(struct drm_device *dev) * \c irq_preinstall() and \c irq_postinstall() functions * before and after the installation. */ -int drm_irq_install(struct drm_device *dev) +int drm_irq_install(struct drm_device *dev, int irq) { - int ret, irq; + int ret; unsigned long sh_flags = 0; char *irqname; - irq = drm_dev_to_irq(dev); - if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return -EINVAL; @@ -399,7 +392,7 @@ int drm_control(struct drm_device *dev, void *data, ctl->irq != irq) return -EINVAL; mutex_lock(&dev->struct_mutex); - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, irq); mutex_unlock(&dev->struct_mutex); return ret; diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c index b686e56646eb..0a3101a3db19 100644 --- a/drivers/gpu/drm/gma500/psb_drv.c +++ b/drivers/gpu/drm/gma500/psb_drv.c @@ -354,7 +354,7 @@ static int psb_driver_load(struct drm_device *dev, unsigned long flags) PSB_WVDC32(0xFFFFFFFF, PSB_INT_MASK_R); spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags); - drm_irq_install(dev); + drm_irq_install(dev, dev->pdev->irq); dev->vblank_disable_allowed = true; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 283ff06001bc..42de2808e53d 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1327,7 +1327,7 @@ static int i915_load_modeset_init(struct drm_device *dev) intel_power_domains_init_hw(dev_priv); - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, dev->pdev->irq); if (ret) goto cleanup_gem_stolen; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 87ce105910f2..6124b491a19e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -574,7 +574,7 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings) mutex_unlock(&dev->struct_mutex); /* We need working interrupts for modeset enabling ... */ - drm_irq_install(dev); + drm_irq_install(dev, dev->pdev->irq); intel_modeset_init_hw(dev); @@ -752,7 +752,7 @@ int i915_reset(struct drm_device *dev) * being false when they shouldn't be able to. */ drm_irq_uninstall(dev); - drm_irq_install(dev); + drm_irq_install(dev, dev->pdev->irq); /* rps/rc6 re-init is necessary to restore state lost after the * reset and the re-install of drm irq. Skip for ironlake per diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d2cc19a7023f..a94938f08698 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4523,7 +4523,7 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, BUG_ON(!list_empty(&dev_priv->gtt.base.active_list)); - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, dev->pdev->irq); if (ret) goto cleanup_ringbuffer; mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index f9de156b9e65..50ec1bed5820 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -288,7 +288,7 @@ static int msm_load(struct drm_device *dev, unsigned long flags) } pm_runtime_get_sync(dev->dev); - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0)); pm_runtime_put_sync(dev->dev); if (ret < 0) { dev_err(dev->dev, "failed to install IRQ handler\n"); diff --git a/drivers/gpu/drm/qxl/qxl_irq.c b/drivers/gpu/drm/qxl/qxl_irq.c index 28f84b4fce32..34d6a85e9023 100644 --- a/drivers/gpu/drm/qxl/qxl_irq.c +++ b/drivers/gpu/drm/qxl/qxl_irq.c @@ -87,7 +87,7 @@ int qxl_irq_init(struct qxl_device *qdev) atomic_set(&qdev->irq_received_cursor, 0); atomic_set(&qdev->irq_received_io_cmd, 0); qdev->irq_received_error = 0; - ret = drm_irq_install(qdev->ddev); + ret = drm_irq_install(qdev->ddev, qdev->ddev->pdev->irq); qdev->ram_header->int_mask = QXL_INTERRUPT_MASK; if (unlikely(ret != 0)) { DRM_ERROR("Failed installing irq: %d\n", ret); diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 089c9ffb0aa9..16807afab362 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -287,7 +287,7 @@ int radeon_irq_kms_init(struct radeon_device *rdev) INIT_WORK(&rdev->reset_work, radeon_irq_reset_work_func); rdev->irq.installed = true; - r = drm_irq_install(rdev->ddev); + r = drm_irq_install(rdev->ddev, rdev->ddev->pdev->irq); if (r) { rdev->irq.installed = false; flush_work(&rdev->hotplug_work); diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c index c839c9c89efb..82c84c7fd4f6 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.c @@ -185,7 +185,7 @@ static int shmob_drm_load(struct drm_device *dev, unsigned long flags) goto done; } - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0)); if (ret < 0) { dev_err(&pdev->dev, "failed to install IRQ handler\n"); goto done; diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c index 171a8203892c..b20b69488dc9 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c @@ -268,7 +268,7 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) } pm_runtime_get_sync(dev->dev); - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0)); pm_runtime_put_sync(dev->dev); if (ret < 0) { dev_err(dev->dev, "failed to install IRQ handler\n"); diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 4a223bbea3b3..6bdd15eea7e8 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -806,7 +806,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset) } if (dev_priv->capabilities & SVGA_CAP_IRQMASK) { - ret = drm_irq_install(dev); + ret = drm_irq_install(dev, dev->pdev->irq); if (ret != 0) { DRM_ERROR("Failed installing irq: %d\n", ret); goto out_no_irq; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 8e8c392d6fa8..7a7cfe88b9bf 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1353,7 +1353,7 @@ extern void drm_core_reclaim_buffers(struct drm_device *dev, /* IRQ support (drm_irq.h) */ extern int drm_control(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int drm_irq_install(struct drm_device *dev); +extern int drm_irq_install(struct drm_device *dev, int irq); extern int drm_irq_uninstall(struct drm_device *dev); extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); -- cgit v1.2.3 From 2d283862dc62daead9db0dc89cd0d0351e91f765 Mon Sep 17 00:00:00 2001 From: Alexey Charkov Date: Tue, 22 Apr 2014 19:28:09 +0400 Subject: net: via-rhine: add OF bus binding This should make the driver usable with VIA/WonderMedia ARM-based Systems-on-Chip integrated Rhine III adapters. Note that these are always in MMIO mode, and don't have any known EEPROM. Signed-off-by: Alexey Charkov Acked-by: Rob Herring Signed-off-by: David S. Miller --- .../devicetree/bindings/net/via-rhine.txt | 17 ++ arch/arm/boot/dts/vt8500.dtsi | 6 + arch/arm/boot/dts/wm8650.dtsi | 6 + arch/arm/boot/dts/wm8850.dtsi | 6 + drivers/net/ethernet/via/Kconfig | 2 +- drivers/net/ethernet/via/via-rhine.c | 307 +++++++++++++-------- 6 files changed, 229 insertions(+), 115 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/via-rhine.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/via-rhine.txt b/Documentation/devicetree/bindings/net/via-rhine.txt new file mode 100644 index 000000000000..334eca2bf937 --- /dev/null +++ b/Documentation/devicetree/bindings/net/via-rhine.txt @@ -0,0 +1,17 @@ +* VIA Rhine 10/100 Network Controller + +Required properties: +- compatible : Should be "via,vt8500-rhine" for integrated + Rhine controllers found in VIA VT8500, WonderMedia WM8950 + and similar. These are listed as 1106:3106 rev. 0x84 on the + virtual PCI bus under vendor-provided kernels +- reg : Address and length of the io space +- interrupts : Should contain the controller interrupt line + +Examples: + +ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index 51d0e912c8f5..1929ad390d88 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -165,5 +165,11 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index 7525982262ac..b1c59a766a13 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -218,5 +218,11 @@ reg = <0xd8100000 0x10000>; interrupts = <48>; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index d98386dd2882..8fbccfbe75f3 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -298,5 +298,11 @@ bus-width = <4>; sdon-inverted; }; + + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; }; }; diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig index 8a049a2b4474..f66ddaee0c87 100644 --- a/drivers/net/ethernet/via/Kconfig +++ b/drivers/net/ethernet/via/Kconfig @@ -19,7 +19,7 @@ if NET_VENDOR_VIA config VIA_RHINE tristate "VIA Rhine support" - depends on PCI + depends on (PCI || USE_OF) select CRC32 select MII ---help--- diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c index 20b83f11004a..4fa92012ceac 100644 --- a/drivers/net/ethernet/via/via-rhine.c +++ b/drivers/net/ethernet/via/via-rhine.c @@ -94,6 +94,10 @@ static const int multicast_filter_limit = 32; #include #include #include +#include +#include +#include +#include #include #include #include @@ -279,6 +283,15 @@ static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = { }; MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); +/* OpenFirmware identifiers for platform-bus devices + * The .data field is currently only used to store chip revision + * (for quirks etc.) + */ +static struct of_device_id rhine_of_tbl[] = { + { .compatible = "via,vt8500-rhine", .data = (void *)0x84 }, + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(of, rhine_of_tbl); /* Offsets to the device registers. */ enum register_offsets { @@ -847,7 +860,8 @@ static void rhine_hw_init(struct net_device *dev, long pioaddr) msleep(5); /* Reload EEPROM controlled bytes cleared by soft reset */ - rhine_reload_eeprom(pioaddr, dev); + if (dev_is_pci(dev->dev.parent)) + rhine_reload_eeprom(pioaddr, dev); } static const struct net_device_ops rhine_netdev_ops = { @@ -868,125 +882,55 @@ static const struct net_device_ops rhine_netdev_ops = { #endif }; -static int rhine_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +static int rhine_init_one_common(struct device *hwdev, int revision, + long pioaddr, void __iomem *ioaddr, int irq) { struct net_device *dev; struct rhine_private *rp; - struct device *hwdev = &pdev->dev; - int revision = pdev->revision; - int i, rc; - u32 quirks; - long pioaddr; - long memaddr; - void __iomem *ioaddr; - int io_size, phy_id; + int i, rc, phy_id; const char *name; -#ifdef USE_MMIO - int bar = 1; -#else - int bar = 0; -#endif - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - pr_info_once("%s\n", version); -#endif - - io_size = 256; - phy_id = 0; - quirks = 0; - name = "Rhine"; - if (revision < VTunknown0) { - quirks = rqRhineI; - io_size = 128; - } else if (revision >= VT6102) { - quirks = rqWOL | rqForceReset; - if (revision < VT6105) { - name = "Rhine II"; - quirks |= rqStatusWBRace; /* Rhine-II exclusive */ - } else { - phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ - if (revision >= VT6105_B0) - quirks |= rq6patterns; - if (revision < VT6105M) - name = "Rhine III"; - else - name = "Rhine III (Management Adapter)"; - } - } - - rc = pci_enable_device(pdev); - if (rc) - goto err_out; /* this should always be supported */ rc = dma_set_mask(hwdev, DMA_BIT_MASK(32)); if (rc) { dev_err(hwdev, "32-bit DMA addresses not supported by the card!?\n"); - goto err_out_pci_disable; - } - - /* sanity check */ - if ((pci_resource_len(pdev, 0) < io_size) || - (pci_resource_len(pdev, 1) < io_size)) { - rc = -EIO; - dev_err(hwdev, "Insufficient PCI resources, aborting\n"); - goto err_out_pci_disable; + goto err_out; } - pioaddr = pci_resource_start(pdev, 0); - memaddr = pci_resource_start(pdev, 1); - - pci_set_master(pdev); - dev = alloc_etherdev(sizeof(struct rhine_private)); if (!dev) { rc = -ENOMEM; - goto err_out_pci_disable; + goto err_out; } SET_NETDEV_DEV(dev, hwdev); rp = netdev_priv(dev); rp->dev = dev; rp->revision = revision; - rp->quirks = quirks; rp->pioaddr = pioaddr; + rp->base = ioaddr; + rp->irq = irq; rp->msg_enable = netif_msg_init(debug, RHINE_MSG_DEFAULT); - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out_free_netdev; - - ioaddr = pci_iomap(pdev, bar, io_size); - if (!ioaddr) { - rc = -EIO; - dev_err(hwdev, - "ioremap failed for device %s, region 0x%X @ 0x%lX\n", - dev_name(hwdev), io_size, memaddr); - goto err_out_free_res; - } - -#ifdef USE_MMIO - enable_mmio(pioaddr, quirks); - - /* Check that selected MMIO registers match the PIO ones */ - i = 0; - while (mmio_verify_registers[i]) { - int reg = mmio_verify_registers[i++]; - unsigned char a = inb(pioaddr+reg); - unsigned char b = readb(ioaddr+reg); - if (a != b) { - rc = -EIO; - dev_err(hwdev, - "MMIO do not match PIO [%02x] (%02x != %02x)\n", - reg, a, b); - goto err_out_unmap; + phy_id = 0; + name = "Rhine"; + if (revision < VTunknown0) { + rp->quirks = rqRhineI; + } else if (revision >= VT6102) { + rp->quirks = rqWOL | rqForceReset; + if (revision < VT6105) { + name = "Rhine II"; + rp->quirks |= rqStatusWBRace; /* Rhine-II exclusive */ + } else { + phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ + if (revision >= VT6105_B0) + rp->quirks |= rq6patterns; + if (revision < VT6105M) + name = "Rhine III"; + else + name = "Rhine III (Management Adapter)"; } } -#endif /* USE_MMIO */ - - rp->base = ioaddr; - rp->irq = pdev->irq; u64_stats_init(&rp->tx_stats.syncp); u64_stats_init(&rp->rx_stats.syncp); @@ -1039,16 +983,10 @@ static int rhine_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* dev->name not defined before register_netdev()! */ rc = register_netdev(dev); if (rc) - goto err_out_unmap; + goto err_out_free_netdev; netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n", - name, -#ifdef USE_MMIO - memaddr, -#else - (long)ioaddr, -#endif - dev->dev_addr, rp->irq); + name, (long)ioaddr, dev->dev_addr, rp->irq); dev_set_drvdata(hwdev, dev); @@ -1079,18 +1017,126 @@ static int rhine_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; +err_out_free_netdev: + free_netdev(dev); +err_out: + return rc; +} + +static int rhine_init_one_pci(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct device *hwdev = &pdev->dev; + int i, rc; + long pioaddr, memaddr; + void __iomem *ioaddr; + int io_size = pdev->revision < VTunknown0 ? 128 : 256; + u32 quirks = pdev->revision < VTunknown0 ? rqRhineI : 0; +#ifdef USE_MMIO + int bar = 1; +#else + int bar = 0; +#endif + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + pr_info_once("%s\n", version); +#endif + + rc = pci_enable_device(pdev); + if (rc) + goto err_out; + + /* sanity check */ + if ((pci_resource_len(pdev, 0) < io_size) || + (pci_resource_len(pdev, 1) < io_size)) { + rc = -EIO; + dev_err(hwdev, "Insufficient PCI resources, aborting\n"); + goto err_out_pci_disable; + } + + pioaddr = pci_resource_start(pdev, 0); + memaddr = pci_resource_start(pdev, 1); + + pci_set_master(pdev); + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out_pci_disable; + + ioaddr = pci_iomap(pdev, bar, io_size); + if (!ioaddr) { + rc = -EIO; + dev_err(hwdev, + "ioremap failed for device %s, region 0x%X @ 0x%lX\n", + dev_name(hwdev), io_size, memaddr); + goto err_out_free_res; + } + +#ifdef USE_MMIO + enable_mmio(pioaddr, quirks); + + /* Check that selected MMIO registers match the PIO ones */ + i = 0; + while (mmio_verify_registers[i]) { + int reg = mmio_verify_registers[i++]; + unsigned char a = inb(pioaddr+reg); + unsigned char b = readb(ioaddr+reg); + + if (a != b) { + rc = -EIO; + dev_err(hwdev, + "MMIO do not match PIO [%02x] (%02x != %02x)\n", + reg, a, b); + goto err_out_unmap; + } + } +#endif /* USE_MMIO */ + + rc = rhine_init_one_common(&pdev->dev, pdev->revision, + pioaddr, ioaddr, pdev->irq); + if (!rc) + return 0; + err_out_unmap: pci_iounmap(pdev, ioaddr); err_out_free_res: pci_release_regions(pdev); -err_out_free_netdev: - free_netdev(dev); err_out_pci_disable: pci_disable_device(pdev); err_out: return rc; } +static int rhine_init_one_platform(struct platform_device *pdev) +{ + const struct of_device_id *match; + u32 revision; + int irq; + struct resource *res; + void __iomem *ioaddr; + + match = of_match_device(rhine_of_tbl, &pdev->dev); + if (!match) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ioaddr)) + return PTR_ERR(ioaddr); + + irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + if (!irq) + return -EINVAL; + + revision = (u32)match->data; + if (!revision) + return -EINVAL; + + return rhine_init_one_common(&pdev->dev, revision, + (long)ioaddr, ioaddr, irq); +} + static int alloc_ring(struct net_device* dev) { struct rhine_private *rp = netdev_priv(dev); @@ -2297,7 +2343,7 @@ static int rhine_close(struct net_device *dev) } -static void rhine_remove_one(struct pci_dev *pdev) +static void rhine_remove_one_pci(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct rhine_private *rp = netdev_priv(dev); @@ -2311,7 +2357,21 @@ static void rhine_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static void rhine_shutdown (struct pci_dev *pdev) +static int rhine_remove_one_platform(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct rhine_private *rp = netdev_priv(dev); + + unregister_netdev(dev); + + iounmap(rp->base); + + free_netdev(dev); + + return 0; +} + +static void rhine_shutdown_pci(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct rhine_private *rp = netdev_priv(dev); @@ -2378,7 +2438,7 @@ static int rhine_suspend(struct device *device) netif_device_detach(dev); if (dev_is_pci(device)) - rhine_shutdown(to_pci_dev(device)); + rhine_shutdown_pci(to_pci_dev(device)); return 0; } @@ -2418,15 +2478,26 @@ static SIMPLE_DEV_PM_OPS(rhine_pm_ops, rhine_suspend, rhine_resume); #endif /* !CONFIG_PM_SLEEP */ -static struct pci_driver rhine_driver = { +static struct pci_driver rhine_driver_pci = { .name = DRV_NAME, .id_table = rhine_pci_tbl, - .probe = rhine_init_one, - .remove = rhine_remove_one, - .shutdown = rhine_shutdown, + .probe = rhine_init_one_pci, + .remove = rhine_remove_one_pci, + .shutdown = rhine_shutdown_pci, .driver.pm = RHINE_PM_OPS, }; +static struct platform_driver rhine_driver_platform = { + .probe = rhine_init_one_platform, + .remove = rhine_remove_one_platform, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = rhine_of_tbl, + .pm = RHINE_PM_OPS, + } +}; + static struct dmi_system_id rhine_dmi_table[] __initdata = { { .ident = "EPIA-M", @@ -2447,6 +2518,8 @@ static struct dmi_system_id rhine_dmi_table[] __initdata = { static int __init rhine_init(void) { + int ret_pci, ret_platform; + /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE pr_info("%s\n", version); @@ -2459,13 +2532,19 @@ static int __init rhine_init(void) else if (avoid_D3) pr_info("avoid_D3 set\n"); - return pci_register_driver(&rhine_driver); + ret_pci = pci_register_driver(&rhine_driver_pci); + ret_platform = platform_driver_register(&rhine_driver_platform); + if ((ret_pci < 0) && (ret_platform < 0)) + return ret_pci; + + return 0; } static void __exit rhine_cleanup(void) { - pci_unregister_driver(&rhine_driver); + platform_driver_unregister(&rhine_driver_platform); + pci_unregister_driver(&rhine_driver_pci); } -- cgit v1.2.3 From 376e242429bf8539ef39a080ac113c8799840b13 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 17 Apr 2014 17:17:05 +0900 Subject: kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria Cc: Ananth N Mavinakayanahalli Cc: Andrew Morton Cc: Anil S Keshavamurthy Cc: Arnd Bergmann Cc: Christopher Li Cc: Chris Wright Cc: David S. Miller Cc: Jan-Simon Möller Cc: Jeremy Fitzhardinge Cc: Linus Torvalds Cc: Randy Dunlap Cc: Rusty Russell Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar --- Documentation/kprobes.txt | 16 +++++- arch/x86/include/asm/asm.h | 7 +++ arch/x86/kernel/paravirt.c | 4 ++ include/asm-generic/vmlinux.lds.h | 9 ++++ include/linux/compiler.h | 2 + include/linux/kprobes.h | 20 ++++++-- kernel/kprobes.c | 100 ++++++++++++++++++++------------------ kernel/sched/core.c | 1 + 8 files changed, 107 insertions(+), 52 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 0cfb00fd86ff..4bbeca8483ed 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -22,8 +22,9 @@ Appendix B: The kprobes sysctl interface Kprobes enables you to dynamically break into any kernel routine and collect debugging and performance information non-disruptively. You -can trap at almost any kernel code address, specifying a handler +can trap at almost any kernel code address(*), specifying a handler routine to be invoked when the breakpoint is hit. +(*: some parts of the kernel code can not be trapped, see 1.5 Blacklist) There are currently three types of probes: kprobes, jprobes, and kretprobes (also called return probes). A kprobe can be inserted @@ -273,6 +274,19 @@ using one of the following techniques: or - Execute 'sysctl -w debug.kprobes_optimization=n' +1.5 Blacklist + +Kprobes can probe most of the kernel except itself. This means +that there are some functions where kprobes cannot probe. Probing +(trapping) such functions can cause a recursive trap (e.g. double +fault) or the nested probe handler may never be called. +Kprobes manages such functions as a blacklist. +If you want to add a function into the blacklist, you just need +to (1) include linux/kprobes.h and (2) use NOKPROBE_SYMBOL() macro +to specify a blacklisted function. +Kprobes checks the given probe address against the blacklist and +rejects registering it, if the given address is in the blacklist. + 2. Architectures Supported Kprobes, jprobes, and return probes are implemented on the following diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h index 4582e8e1cd1a..7730c1c5c83a 100644 --- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -57,6 +57,12 @@ .long (from) - . ; \ .long (to) - . + 0x7ffffff0 ; \ .popsection + +# define _ASM_NOKPROBE(entry) \ + .pushsection "_kprobe_blacklist","aw" ; \ + _ASM_ALIGN ; \ + _ASM_PTR (entry); \ + .popsection #else # define _ASM_EXTABLE(from,to) \ " .pushsection \"__ex_table\",\"a\"\n" \ @@ -71,6 +77,7 @@ " .long (" #from ") - .\n" \ " .long (" #to ") - . + 0x7ffffff0\n" \ " .popsection\n" +/* For C file, we already have NOKPROBE_SYMBOL macro */ #endif #endif /* _ASM_X86_ASM_H */ diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 1b10af835c31..e136869ae42e 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -389,6 +390,9 @@ __visible struct pv_cpu_ops pv_cpu_ops = { .end_context_switch = paravirt_nop, }; +/* At this point, native_get_debugreg has a real function entry */ +NOKPROBE_SYMBOL(native_get_debugreg); + struct pv_apic_ops pv_apic_ops = { #ifdef CONFIG_X86_LOCAL_APIC .startup_ipi_hook = paravirt_nop, diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 146e4fffd710..40ceb3ceba79 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -109,6 +109,14 @@ #define BRANCH_PROFILE() #endif +#ifdef CONFIG_KPROBES +#define KPROBE_BLACKLIST() VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \ + *(_kprobe_blacklist) \ + VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .; +#else +#define KPROBE_BLACKLIST() +#endif + #ifdef CONFIG_EVENT_TRACING #define FTRACE_EVENTS() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_ftrace_events) = .; \ @@ -507,6 +515,7 @@ *(.init.rodata) \ FTRACE_EVENTS() \ TRACE_SYSCALLS() \ + KPROBE_BLACKLIST() \ MEM_DISCARD(init.rodata) \ CLK_OF_TABLES() \ RESERVEDMEM_OF_TABLES() \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index ee7239ea1583..0300c0f5c88b 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -374,7 +374,9 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); /* Ignore/forbid kprobes attach on very low level functions marked by this attribute: */ #ifdef CONFIG_KPROBES # define __kprobes __attribute__((__section__(".kprobes.text"))) +# define nokprobe_inline __always_inline #else # define __kprobes +# define nokprobe_inline inline #endif #endif /* __LINUX_COMPILER_H */ diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index cdf9251f8249..e059507c465d 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -205,10 +205,10 @@ struct kretprobe_blackpoint { void *addr; }; -struct kprobe_blackpoint { - const char *name; +struct kprobe_blacklist_entry { + struct list_head list; unsigned long start_addr; - unsigned long range; + unsigned long end_addr; }; #ifdef CONFIG_KPROBES @@ -477,4 +477,18 @@ static inline int enable_jprobe(struct jprobe *jp) return enable_kprobe(&jp->kp); } +#ifdef CONFIG_KPROBES +/* + * Blacklist ganerating macro. Specify functions which is not probed + * by using this macro. + */ +#define __NOKPROBE_SYMBOL(fname) \ +static unsigned long __used \ + __attribute__((section("_kprobe_blacklist"))) \ + _kbl_addr_##fname = (unsigned long)fname; +#define NOKPROBE_SYMBOL(fname) __NOKPROBE_SYMBOL(fname) +#else +#define NOKPROBE_SYMBOL(fname) +#endif + #endif /* _LINUX_KPROBES_H */ diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 5b5ac76671e7..5ffc6875d2a7 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -86,18 +86,8 @@ static raw_spinlock_t *kretprobe_table_lock_ptr(unsigned long hash) return &(kretprobe_table_locks[hash].lock); } -/* - * Normally, functions that we'd want to prohibit kprobes in, are marked - * __kprobes. But, there are cases where such functions already belong to - * a different section (__sched for preempt_schedule) - * - * For such cases, we now have a blacklist - */ -static struct kprobe_blackpoint kprobe_blacklist[] = { - {"preempt_schedule",}, - {"native_get_debugreg",}, - {NULL} /* Terminator */ -}; +/* Blacklist -- list of struct kprobe_blacklist_entry */ +static LIST_HEAD(kprobe_blacklist); #ifdef __ARCH_WANT_KPROBES_INSN_SLOT /* @@ -1328,24 +1318,22 @@ bool __weak arch_within_kprobe_blacklist(unsigned long addr) addr < (unsigned long)__kprobes_text_end; } -static int __kprobes in_kprobes_functions(unsigned long addr) +static bool __kprobes within_kprobe_blacklist(unsigned long addr) { - struct kprobe_blackpoint *kb; + struct kprobe_blacklist_entry *ent; if (arch_within_kprobe_blacklist(addr)) - return -EINVAL; + return true; /* * If there exists a kprobe_blacklist, verify and * fail any probe registration in the prohibited area */ - for (kb = kprobe_blacklist; kb->name != NULL; kb++) { - if (kb->start_addr) { - if (addr >= kb->start_addr && - addr < (kb->start_addr + kb->range)) - return -EINVAL; - } + list_for_each_entry(ent, &kprobe_blacklist, list) { + if (addr >= ent->start_addr && addr < ent->end_addr) + return true; } - return 0; + + return false; } /* @@ -1436,7 +1424,7 @@ static __kprobes int check_kprobe_address_safe(struct kprobe *p, /* Ensure it is not in reserved area nor out of text */ if (!kernel_text_address((unsigned long) p->addr) || - in_kprobes_functions((unsigned long) p->addr) || + within_kprobe_blacklist((unsigned long) p->addr) || jump_label_text_reserved(p->addr, p->addr)) { ret = -EINVAL; goto out; @@ -2022,6 +2010,38 @@ void __kprobes dump_kprobe(struct kprobe *kp) kp->symbol_name, kp->addr, kp->offset); } +/* + * Lookup and populate the kprobe_blacklist. + * + * Unlike the kretprobe blacklist, we'll need to determine + * the range of addresses that belong to the said functions, + * since a kprobe need not necessarily be at the beginning + * of a function. + */ +static int __init populate_kprobe_blacklist(unsigned long *start, + unsigned long *end) +{ + unsigned long *iter; + struct kprobe_blacklist_entry *ent; + unsigned long offset = 0, size = 0; + + for (iter = start; iter < end; iter++) { + if (!kallsyms_lookup_size_offset(*iter, &size, &offset)) { + pr_err("Failed to find blacklist %p\n", (void *)*iter); + continue; + } + + ent = kmalloc(sizeof(*ent), GFP_KERNEL); + if (!ent) + return -ENOMEM; + ent->start_addr = *iter; + ent->end_addr = *iter + size; + INIT_LIST_HEAD(&ent->list); + list_add_tail(&ent->list, &kprobe_blacklist); + } + return 0; +} + /* Module notifier call back, checking kprobes on the module */ static int __kprobes kprobes_module_callback(struct notifier_block *nb, unsigned long val, void *data) @@ -2065,14 +2085,13 @@ static struct notifier_block kprobe_module_nb = { .priority = 0 }; +/* Markers of _kprobe_blacklist section */ +extern unsigned long __start_kprobe_blacklist[]; +extern unsigned long __stop_kprobe_blacklist[]; + static int __init init_kprobes(void) { int i, err = 0; - unsigned long offset = 0, size = 0; - char *modname, namebuf[KSYM_NAME_LEN]; - const char *symbol_name; - void *addr; - struct kprobe_blackpoint *kb; /* FIXME allocate the probe table, currently defined statically */ /* initialize all list heads */ @@ -2082,26 +2101,11 @@ static int __init init_kprobes(void) raw_spin_lock_init(&(kretprobe_table_locks[i].lock)); } - /* - * Lookup and populate the kprobe_blacklist. - * - * Unlike the kretprobe blacklist, we'll need to determine - * the range of addresses that belong to the said functions, - * since a kprobe need not necessarily be at the beginning - * of a function. - */ - for (kb = kprobe_blacklist; kb->name != NULL; kb++) { - kprobe_lookup_name(kb->name, addr); - if (!addr) - continue; - - kb->start_addr = (unsigned long)addr; - symbol_name = kallsyms_lookup(kb->start_addr, - &size, &offset, &modname, namebuf); - if (!symbol_name) - kb->range = 0; - else - kb->range = size; + err = populate_kprobe_blacklist(__start_kprobe_blacklist, + __stop_kprobe_blacklist); + if (err) { + pr_err("kprobes: failed to populate blacklist: %d\n", err); + pr_err("Please take care of using kprobes.\n"); } if (kretprobe_blacklist_size) { diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 268a45ea238c..6863631e8cd0 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -2804,6 +2804,7 @@ asmlinkage void __sched notrace preempt_schedule(void) barrier(); } while (need_resched()); } +NOKPROBE_SYMBOL(preempt_schedule); EXPORT_SYMBOL(preempt_schedule); #endif /* CONFIG_PREEMPT */ -- cgit v1.2.3 From f05b42eaa22cd7c6736d31316e6046c5127f8721 Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Tue, 22 Apr 2014 16:30:20 -0700 Subject: bonding: Added bond_tlb_xmit() for tlb mode. Re-organized the xmit function for the lb mode separating tlb xmit from the alb mode. This will enable use of the hashing policies like 802.3ad mode. Also extended use of xmit-hash-policy to tlb mode. Now the tlb-mode defaults to BOND_XMIT_POLICY_LAYER2 if the xmit policy module parameter is not set (just like 802.3ad, or Xor mode). Change-Id: I140257403d272df75f477b380207338d0f04963e Signed-off-by: Mahesh Bandewar Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 2 +- drivers/net/bonding/bond_alb.c | 26 ++++++++++++++++++++++++++ drivers/net/bonding/bond_alb.h | 1 + drivers/net/bonding/bond_main.c | 6 ++++-- drivers/net/bonding/bond_options.c | 2 +- 5 files changed, 33 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index a383c00392d0..a97c567f24e8 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -769,7 +769,7 @@ use_carrier xmit_hash_policy Selects the transmit hash policy to use for slave selection in - balance-xor and 802.3ad modes. Possible values are: + balance-xor, 802.3ad, and tlb modes. Possible values are: layer2 diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 5cd36016c393..153232ed4b3f 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1381,6 +1381,32 @@ out: return NETDEV_TX_OK; } +int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev) +{ + struct bonding *bond = netdev_priv(bond_dev); + struct ethhdr *eth_data; + struct slave *tx_slave = NULL; + u32 hash_index; + + skb_reset_mac_header(skb); + eth_data = eth_hdr(skb); + + /* Do not TX balance any multicast or broadcast */ + if (!is_multicast_ether_addr(eth_data->h_dest)) { + switch (skb->protocol) { + case htons(ETH_P_IP): + case htons(ETH_P_IPX): + /* In case of IPX, it will falback to L2 hash */ + case htons(ETH_P_IPV6): + hash_index = bond_xmit_hash(bond, skb); + tx_slave = tlb_choose_channel(bond, hash_index & 0xFF, skb->len); + break; + } + } + + return bond_do_alb_xmit(skb, bond, tx_slave); +} + int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h index e09dd4bfafff..5fc76c01636c 100644 --- a/drivers/net/bonding/bond_alb.h +++ b/drivers/net/bonding/bond_alb.h @@ -175,6 +175,7 @@ void bond_alb_deinit_slave(struct bonding *bond, struct slave *slave); void bond_alb_handle_link_change(struct bonding *bond, struct slave *slave, char link); void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave); int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev); +int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev); void bond_alb_monitor(struct work_struct *); int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr); void bond_alb_clear_vlan(struct bonding *bond, unsigned short vlan_id); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c7046350c4b5..1fd32a16cbc5 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3774,8 +3774,9 @@ static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev case BOND_MODE_8023AD: return bond_3ad_xmit_xor(skb, dev); case BOND_MODE_ALB: - case BOND_MODE_TLB: return bond_alb_xmit(skb, dev); + case BOND_MODE_TLB: + return bond_tlb_xmit(skb, dev); default: /* Should never happen, mode already checked */ pr_err("%s: Error: Unknown bonding mode %d\n", @@ -3996,7 +3997,8 @@ static int bond_check_params(struct bond_params *params) if (xmit_hash_policy) { if ((bond_mode != BOND_MODE_XOR) && - (bond_mode != BOND_MODE_8023AD)) { + (bond_mode != BOND_MODE_8023AD) && + (bond_mode != BOND_MODE_TLB)) { pr_info("xmit_hash_policy param is irrelevant in mode %s\n", bond_mode_name(bond_mode)); } else { diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 724e30fa20b9..dc3893841752 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -199,7 +199,7 @@ static const struct bond_option bond_opts[] = { [BOND_OPT_XMIT_HASH] = { .id = BOND_OPT_XMIT_HASH, .name = "xmit_hash_policy", - .desc = "balance-xor and 802.3ad hashing method", + .desc = "balance-xor, 802.3ad, and tlb hashing method", .values = bond_xmit_hashtype_tbl, .set = bond_option_xmit_hash_policy_set }, -- cgit v1.2.3 From e9f0fb88493570200b8dc1cc02d3e676412d25bc Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Tue, 22 Apr 2014 16:30:22 -0700 Subject: bonding: Add tlb_dynamic_lb parameter for tlb mode The aggresive load balancing causes packet re-ordering as active flows are moved from a slave to another within the group. Sometime this aggresive lb is not necessary if the preference is for less re-ordering. This parameter if used with value "0" disables this dynamic flow shuffling minimizing packet re-ordering. Of course the side effect is that it has to live with the static load balancing that the hashing distribution provides. This impact is less severe if the correct xmit-hashing-policy is used for the tlb setup. The default value of the parameter is set to "1" mimicing the earlier behavior. Ran the netperf test with 200 stream for 1 min between two hosts with 4x1G trunk (xmit-lb mode with xmit-policy L3+4) before and after these changes. Following was the command used for those 200 instances - netperf -t TCP_RR -l 60 -s 5 -H -- -r81920,81920 Transactions per second: Before change: 1,367.11 After change: 1,470.65 Change-Id: Ie3f75c77282cf602e83a6e833c6eb164e72a0990 Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 42 ++++++++++++++++++++++++++++++------ drivers/net/bonding/bond_alb.c | 19 ++++++++++++---- drivers/net/bonding/bond_main.c | 4 +++- drivers/net/bonding/bond_options.c | 27 +++++++++++++++++++++++ drivers/net/bonding/bond_options.h | 1 + drivers/net/bonding/bond_sysfs.c | 29 +++++++++++++++++++++++++ drivers/net/bonding/bonding.h | 1 + 7 files changed, 111 insertions(+), 12 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index a97c567f24e8..9c723ecd0025 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -585,13 +585,19 @@ mode balance-tlb or 5 Adaptive transmit load balancing: channel bonding that - does not require any special switch support. The - outgoing traffic is distributed according to the - current load (computed relative to the speed) on each - slave. Incoming traffic is received by the current - slave. If the receiving slave fails, another slave - takes over the MAC address of the failed receiving - slave. + does not require any special switch support. + + In tlb_dynamic_lb=1 mode; the outgoing traffic is + distributed according to the current load (computed + relative to the speed) on each slave. + + In tlb_dynamic_lb=0 mode; the load balancing based on + current load is disabled and the load is distributed + only using the hash distribution. + + Incoming traffic is received by the current slave. + If the receiving slave fails, another slave takes over + the MAC address of the failed receiving slave. Prerequisite: @@ -736,6 +742,28 @@ primary_reselect This option was added for bonding version 3.6.0. +tlb_dynamic_lb + + Specifies if dynamic shuffling of flows is enabled in tlb + mode. The value has no effect on any other modes. + + The default behavior of tlb mode is to shuffle active flows across + slaves based on the load in that interval. This gives nice lb + characteristics but can cause packet reordering. If re-ordering is + a concern use this variable to disable flow shuffling and rely on + load balancing provided solely by the hash distribution. + xmit-hash-policy can be used to select the appropriate hashing for + the setup. + + The sysfs entry can be used to change the setting per bond device + and the initial value is derived from the module parameter. The + sysfs entry is allowed to be changed only if the bond device is + down. + + The default value is "1" that enables flow shuffling while value "0" + disables it. This option was added in bonding driver 3.7.1 + + updelay Specifies the time, in milliseconds, to wait before enabling a diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 153232ed4b3f..70de039dad2e 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1356,7 +1356,8 @@ static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond, if (!tx_slave) { /* unbalanced or unassigned, send through primary */ tx_slave = rcu_dereference(bond->curr_active_slave); - bond_info->unbalanced_load += skb->len; + if (bond->params.tlb_dynamic_lb) + bond_info->unbalanced_load += skb->len; } if (tx_slave && SLAVE_IS_OK(tx_slave)) { @@ -1369,7 +1370,7 @@ static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond, goto out; } - if (tx_slave) { + if (tx_slave && bond->params.tlb_dynamic_lb) { _lock_tx_hashtbl(bond); __tlb_clear_slave(bond, tx_slave, 0); _unlock_tx_hashtbl(bond); @@ -1399,11 +1400,21 @@ int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev) /* In case of IPX, it will falback to L2 hash */ case htons(ETH_P_IPV6): hash_index = bond_xmit_hash(bond, skb); - tx_slave = tlb_choose_channel(bond, hash_index & 0xFF, skb->len); + if (bond->params.tlb_dynamic_lb) { + tx_slave = tlb_choose_channel(bond, + hash_index & 0xFF, + skb->len); + } else { + struct list_head *iter; + int idx = hash_index % bond->slave_cnt; + + bond_for_each_slave_rcu(bond, tx_slave, iter) + if (--idx < 0) + break; + } break; } } - return bond_do_alb_xmit(skb, bond, tx_slave); } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1fd32a16cbc5..9d08e007d853 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3096,7 +3096,8 @@ static int bond_open(struct net_device *bond_dev) */ if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) return -ENOMEM; - queue_delayed_work(bond->wq, &bond->alb_work, 0); + if (bond->params.tlb_dynamic_lb) + queue_delayed_work(bond->wq, &bond->alb_work, 0); } if (bond->params.miimon) /* link check interval, in milliseconds. */ @@ -4304,6 +4305,7 @@ static int bond_check_params(struct bond_params *params) params->min_links = min_links; params->lp_interval = lp_interval; params->packets_per_slave = packets_per_slave; + params->tlb_dynamic_lb = 1; /* Default value */ if (packets_per_slave > 0) { params->reciprocal_packets_per_slave = reciprocal_value(packets_per_slave); diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index dc3893841752..9fba7a1e6d51 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -70,6 +70,8 @@ static int bond_option_mode_set(struct bonding *bond, const struct bond_opt_value *newval); static int bond_option_slaves_set(struct bonding *bond, const struct bond_opt_value *newval); +static int bond_option_tlb_dynamic_lb_set(struct bonding *bond, + const struct bond_opt_value *newval); static const struct bond_opt_value bond_mode_tbl[] = { @@ -179,6 +181,12 @@ static const struct bond_opt_value bond_lp_interval_tbl[] = { { NULL, -1, 0}, }; +static const struct bond_opt_value bond_tlb_dynamic_lb_tbl[] = { + { "off", 0, 0}, + { "on", 1, BOND_VALFLAG_DEFAULT}, + { NULL, -1, 0} +}; + static const struct bond_option bond_opts[] = { [BOND_OPT_MODE] = { .id = BOND_OPT_MODE, @@ -364,6 +372,15 @@ static const struct bond_option bond_opts[] = { .flags = BOND_OPTFLAG_RAWVAL, .set = bond_option_slaves_set }, + [BOND_OPT_TLB_DYNAMIC_LB] = { + .id = BOND_OPT_TLB_DYNAMIC_LB, + .name = "dynamic_lb", + .desc = "Enable dynamic flow shuffling", + .unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_TLB)), + .values = bond_tlb_dynamic_lb_tbl, + .flags = BOND_OPTFLAG_IFDOWN, + .set = bond_option_tlb_dynamic_lb_set, + }, { } }; @@ -1337,3 +1354,13 @@ err_no_cmd: ret = -EPERM; goto out; } + +static int bond_option_tlb_dynamic_lb_set(struct bonding *bond, + const struct bond_opt_value *newval) +{ + pr_info("%s: Setting dynamic-lb to %s (%llu)\n", + bond->dev->name, newval->string, newval->value); + bond->params.tlb_dynamic_lb = newval->value; + + return 0; +} diff --git a/drivers/net/bonding/bond_options.h b/drivers/net/bonding/bond_options.h index 12be9e1bfb0c..c1860f06145a 100644 --- a/drivers/net/bonding/bond_options.h +++ b/drivers/net/bonding/bond_options.h @@ -62,6 +62,7 @@ enum { BOND_OPT_RESEND_IGMP, BOND_OPT_LP_INTERVAL, BOND_OPT_SLAVES, + BOND_OPT_TLB_DYNAMIC_LB, BOND_OPT_LAST }; diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 0e8b268da0a0..431892f1a4ce 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1039,6 +1039,34 @@ static ssize_t bonding_store_lp_interval(struct device *d, static DEVICE_ATTR(lp_interval, S_IRUGO | S_IWUSR, bonding_show_lp_interval, bonding_store_lp_interval); +static ssize_t bonding_show_tlb_dynamic_lb(struct device *d, + struct device_attribute *attr, + char *buf) +{ + struct bonding *bond = to_bond(d); + return sprintf(buf, "%d\n", bond->params.tlb_dynamic_lb); +} + +static ssize_t bonding_store_tlb_dynamic_lb(struct device *d, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct bonding *bond = to_bond(d); + int ret; + + ret = bond_opt_tryset_rtnl(bond, BOND_OPT_TLB_DYNAMIC_LB, + (char *)buf); + if (!ret) + ret = count; + + return ret; +} + +static DEVICE_ATTR(tlb_dynamic_lb, S_IRUGO | S_IWUSR, + bonding_show_tlb_dynamic_lb, + bonding_store_tlb_dynamic_lb); + static ssize_t bonding_show_packets_per_slave(struct device *d, struct device_attribute *attr, char *buf) @@ -1099,6 +1127,7 @@ static struct attribute *per_bond_attrs[] = { &dev_attr_min_links.attr, &dev_attr_lp_interval.attr, &dev_attr_packets_per_slave.attr, + &dev_attr_tlb_dynamic_lb.attr, NULL, }; diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index c0948ca26389..c1c7c2f12ac4 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -174,6 +174,7 @@ struct bond_params { int resend_igmp; int lp_interval; int packets_per_slave; + int tlb_dynamic_lb; struct reciprocal_value reciprocal_packets_per_slave; }; -- cgit v1.2.3 From 0dbfc8fd32f3dbe3069969fd6120ce3c61964c40 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 24 Apr 2014 19:09:06 +0200 Subject: devicetree: add at86rf230 bindings This patch adds devicetree bindings for the at86rf230 IEEE 802.15.4 SPI device driver. Signed-off-by: Alexander Aring Signed-off-by: David S. Miller --- .../bindings/net/ieee802154/at86rf230.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt new file mode 100644 index 000000000000..d3bbdded4cbe --- /dev/null +++ b/Documentation/devicetree/bindings/net/ieee802154/at86rf230.txt @@ -0,0 +1,23 @@ +* AT86RF230 IEEE 802.15.4 * + +Required properties: + - compatible: should be "atmel,at86rf230", "atmel,at86rf231", + "atmel,at86rf233" or "atmel,at86rf212" + - spi-max-frequency: maximal bus speed, should be set to 7500000 depends + sync or async operation mode + - reg: the chipselect index + - interrupts: the interrupt generated by the device + +Optional properties: + - reset-gpio: GPIO spec for the rstn pin + - sleep-gpio: GPIO spec for the slp_tr pin + +Example: + + at86rf231@0 { + compatible = "atmel,at86rf231"; + spi-max-frequency = <7500000>; + reg = <0>; + interrupts = <19 1>; + interrupt-parent = <&gpio3>; + }; -- cgit v1.2.3 From fcecaeb026f9b35e679c12aed8a92bee3a673da0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 24 Apr 2014 18:08:58 -0700 Subject: Documentation: add Broadcom SYSTEMPORT Device Tree bindings Add the Device Tree bindings documentation for the Broadcom SYSTEMPORT Ethernet MAC controller hardware. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- .../bindings/net/broadcom-systemport.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/broadcom-systemport.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt new file mode 100644 index 000000000000..1b7600e022dd --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt @@ -0,0 +1,29 @@ +* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT) + +Required properties: +- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" +- reg: address and length of the register set for the device. +- interrupts: interrupts for the device, first cell must be for the the rx + interrupts, and the second cell should be for the transmit queues +- local-mac-address: Ethernet MAC address (48 bits) of this adapter +- phy-mode: Should be a string describing the PHY interface to the + Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt +- fixed-link: see Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for + the property specific details + +Optional properties: +- systemport,num-tier2-arb: number of tier 2 arbiters, an integer +- systemport,num-tier1-arb: number of tier 1 arbiters, an integer +- systemport,num-txq: number of HW transmit queues, an integer +- systemport,num-rxq: number of HW receive queues, an integer + +Example: +ethernet@f04a0000 { + compatible = "brcm,systemport-v1.00"; + reg = <0xf04a0000 0x4650>; + local-mac-address = [ 00 11 22 33 44 55 ]; + fixed-link = <0 1 1000 0 0>; + phy-mode = "gmii"; + interrupts = <0x0 0x16 0x0>, + <0x0 0x17 0x0>; +}; -- cgit v1.2.3 From 6d48f44b7b2af67b33c1ae5994b8f642685c8bc8 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 30 Apr 2014 15:23:33 +0300 Subject: mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_free Add a resource managed devm_mdiobus_alloc[_size]()/devm_mdiobus_free() to automatically clean up MDIO bus alocations made by MDIO drivers, thus leading to simplified MDIO drivers code. Cc: Florian Fainelli Cc: Sergei Shtylyov Acked-and-tested-by: Lad, Prabhakar Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- Documentation/driver-model/devres.txt | 5 +++ drivers/net/phy/mdio_bus.c | 67 +++++++++++++++++++++++++++++++++++ include/linux/phy.h | 7 ++++ 3 files changed, 79 insertions(+) (limited to 'Documentation') diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 4f7897e99cba..c74e04494ade 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -308,3 +308,8 @@ SLAVE DMA ENGINE SPI devm_spi_register_master() + +MDIO + devm_mdiobus_alloc() + devm_mdiobus_alloc_size() + devm_mdiobus_free() diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 76f54b32a120..68a9a3867c0f 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -69,6 +69,73 @@ struct mii_bus *mdiobus_alloc_size(size_t size) } EXPORT_SYMBOL(mdiobus_alloc_size); +static void _devm_mdiobus_free(struct device *dev, void *res) +{ + mdiobus_free(*(struct mii_bus **)res); +} + +static int devm_mdiobus_match(struct device *dev, void *res, void *data) +{ + struct mii_bus **r = res; + + if (WARN_ON(!r || !*r)) + return 0; + + return *r == data; +} + +/** + * devm_mdiobus_alloc_size - Resource-managed mdiobus_alloc_size() + * @dev: Device to allocate mii_bus for + * @sizeof_priv: Space to allocate for private structure. + * + * Managed mdiobus_alloc_size. mii_bus allocated with this function is + * automatically freed on driver detach. + * + * If an mii_bus allocated with this function needs to be freed separately, + * devm_mdiobus_free() must be used. + * + * RETURNS: + * Pointer to allocated mii_bus on success, NULL on failure. + */ +struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv) +{ + struct mii_bus **ptr, *bus; + + ptr = devres_alloc(_devm_mdiobus_free, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return NULL; + + /* use raw alloc_dr for kmalloc caller tracing */ + bus = mdiobus_alloc_size(sizeof_priv); + if (bus) { + *ptr = bus; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return bus; +} +EXPORT_SYMBOL_GPL(devm_mdiobus_alloc); + +/** + * devm_mdiobus_free - Resource-managed mdiobus_free() + * @dev: Device this mii_bus belongs to + * @bus: the mii_bus associated with the device + * + * Free mii_bus allocated with devm_mdiobus_alloc_size(). + */ +void devm_mdiobus_free(struct device *dev, struct mii_bus *bus) +{ + int rc; + + rc = devres_release(dev, _devm_mdiobus_free, + devm_mdiobus_match, bus); + WARN_ON(rc); +} +EXPORT_SYMBOL_GPL(devm_mdiobus_free); + /** * mdiobus_release - mii_bus device release callback * @d: the target struct device that contains the mii_bus diff --git a/include/linux/phy.h b/include/linux/phy.h index 51d15f684e7e..864ddafad8cc 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -198,6 +198,13 @@ static inline struct mii_bus *mdiobus_alloc(void) int mdiobus_register(struct mii_bus *bus); void mdiobus_unregister(struct mii_bus *bus); void mdiobus_free(struct mii_bus *bus); +struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); +static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) +{ + return devm_mdiobus_alloc_size(dev, 0); +} + +void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); -- cgit v1.2.3 From dfee07cceff94af498a8465353554e0b63c3b152 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 1 May 2014 08:16:03 -0700 Subject: net: filter: doc: expand and improve BPF documentation In particular, this patch tries to clarify internal BPF calling convention and adds internal BPF examples, JIT guide, use cases. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 158 +++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 82e1cb0b3da8..748fd385535d 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -613,7 +613,7 @@ Some core changes of the new internal format: Therefore, BPF calling convention is defined as: - * R0 - return value from in-kernel function + * R0 - return value from in-kernel function, and exit value for BPF program * R1 - R5 - arguments from BPF program to in-kernel function * R6 - R9 - callee saved registers that in-kernel function will preserve * R10 - read-only frame pointer to access stack @@ -659,9 +659,140 @@ Some core changes of the new internal format: - Introduces bpf_call insn and register passing convention for zero overhead calls from/to other kernel functions: - After a kernel function call, R1 - R5 are reset to unreadable and R0 has a - return type of the function. Since R6 - R9 are callee saved, their state is - preserved across the call. + Before an in-kernel function call, the internal BPF program needs to + place function arguments into R1 to R5 registers to satisfy calling + convention, then the interpreter will take them from registers and pass + to in-kernel function. If R1 - R5 registers are mapped to CPU registers + that are used for argument passing on given architecture, the JIT compiler + doesn't need to emit extra moves. Function arguments will be in the correct + registers and BPF_CALL instruction will be JITed as single 'call' HW + instruction. This calling convention was picked to cover common call + situations without performance penalty. + + After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has + a return value of the function. Since R6 - R9 are callee saved, their state + is preserved across the call. + + For example, consider three C functions: + + u64 f1() { return (*_f2)(1); } + u64 f2(u64 a) { return f3(a + 1, a); } + u64 f3(u64 a, u64 b) { return a - b; } + + GCC can compile f1, f3 into x86_64: + + f1: + movl $1, %edi + movq _f2(%rip), %rax + jmp *%rax + f3: + movq %rdi, %rax + subq %rsi, %rax + ret + + Function f2 in BPF may look like: + + f2: + bpf_mov R2, R1 + bpf_add R1, 1 + bpf_call f3 + bpf_exit + + If f2 is JITed and the pointer stored to '_f2'. The calls f1 -> f2 -> f3 and + returns will be seamless. Without JIT, __sk_run_filter() interpreter needs to + be used to call into f2. + + For practical reasons all BPF programs have only one argument 'ctx' which is + already placed into R1 (e.g. on __sk_run_filter() startup) and the programs + can call kernel functions with up to 5 arguments. Calls with 6 or more arguments + are currently not supported, but these restrictions can be lifted if necessary + in the future. + + On 64-bit architectures all register map to HW registers one to one. For + example, x86_64 JIT compiler can map them as ... + + R0 - rax + R1 - rdi + R2 - rsi + R3 - rdx + R4 - rcx + R5 - r8 + R6 - rbx + R7 - r13 + R8 - r14 + R9 - r15 + R10 - rbp + + ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing + and rbx, r12 - r15 are callee saved. + + Then the following internal BPF pseudo-program: + + bpf_mov R6, R1 /* save ctx */ + bpf_mov R2, 2 + bpf_mov R3, 3 + bpf_mov R4, 4 + bpf_mov R5, 5 + bpf_call foo + bpf_mov R7, R0 /* save foo() return value */ + bpf_mov R1, R6 /* restore ctx for next call */ + bpf_mov R2, 6 + bpf_mov R3, 7 + bpf_mov R4, 8 + bpf_mov R5, 9 + bpf_call bar + bpf_add R0, R7 + bpf_exit + + After JIT to x86_64 may look like: + + push %rbp + mov %rsp,%rbp + sub $0x228,%rsp + mov %rbx,-0x228(%rbp) + mov %r13,-0x220(%rbp) + mov %rdi,%rbx + mov $0x2,%esi + mov $0x3,%edx + mov $0x4,%ecx + mov $0x5,%r8d + callq foo + mov %rax,%r13 + mov %rbx,%rdi + mov $0x2,%esi + mov $0x3,%edx + mov $0x4,%ecx + mov $0x5,%r8d + callq bar + add %r13,%rax + mov -0x228(%rbp),%rbx + mov -0x220(%rbp),%r13 + leaveq + retq + + Which is in this example equivalent in C to: + + u64 bpf_filter(u64 ctx) + { + return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9); + } + + In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64 + arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper + registers and place their return value into '%rax' which is R0 in BPF. + Prologue and epilogue are emitted by JIT and are implicit in the + interpreter. R0-R5 are scratch registers, so BPF program needs to preserve + them across the calls as defined by calling convention. + + For example the following program is invalid: + + bpf_mov R1, 1 + bpf_call foo + bpf_mov R0, R1 + bpf_exit + + After the call the registers R1-R5 contain junk values and cannot be read. + In the future a BPF verifier can be used to validate internal BPF programs. Also in the new design, BPF is limited to 4096 insns, which means that any program will terminate quickly and will only call a fixed number of kernel @@ -676,6 +807,25 @@ A program, that is translated internally consists of the following elements: op:16, jt:8, jf:8, k:32 ==> op:8, a_reg:4, x_reg:4, off:16, imm:32 +So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field +has room for new instructions. Some of them may use 16/24/32 byte encoding. New +instructions must be multiple of 8 bytes to preserve backward compatibility. + +Internal BPF is a general purpose RISC instruction set. Not every register and +every instruction are used during translation from original BPF to new format. +For example, socket filters are not using 'exclusive add' instruction, but +tracing filters may do to maintain counters of events, for example. Register R9 +is not used by socket filters either, but more complex filters may be running +out of registers and would have to resort to spill/fill to stack. + +Internal BPF can used as generic assembler for last step performance +optimizations, socket filters and seccomp are using it as assembler. Tracing +filters may use it as assembler to generate code from kernel. In kernel usage +may not be bounded by security considerations, since generated internal BPF code +may be optimizing internal code path and not being exposed to the user space. +Safety of internal BPF can come from a verifier (TBD). In such use cases as +described, it may be used as safe instruction set. + Just like the original BPF, the new format runs within a controlled environment, is deterministic and the kernel can easily prove that. The safety of the program can be determined in two steps: first step does depth-first-search to disallow -- cgit v1.2.3 From 122b250511e28c87043a6583988d4616895b5b53 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 25 Apr 2014 16:59:00 +0200 Subject: drm/i915: Integrate cmd parser kerneldoc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ville noticed that we have this nice kerneldoc but it's not integrated anywhere. Fix this asap! Cc: Ville Syrjälä Cc: Brad Volkin Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 5 +++++ drivers/gpu/drm/i915/i915_cmd_parser.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 83dd0b043c28..1c51d43f2548 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2942,6 +2942,11 @@ int num_ioctls; This sections covers all things related to the GEM implementation in the i915 driver. + + Batchbuffer Parsing +!Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser +!Idrivers/gpu/drm/i915/i915_cmd_parser.c + diff --git a/drivers/gpu/drm/i915/i915_cmd_parser.c b/drivers/gpu/drm/i915/i915_cmd_parser.c index 9bac0979a294..6ea94139e20b 100644 --- a/drivers/gpu/drm/i915/i915_cmd_parser.c +++ b/drivers/gpu/drm/i915/i915_cmd_parser.c @@ -28,7 +28,7 @@ #include "i915_drv.h" /** - * DOC: i915 batch buffer command parser + * DOC: batch buffer command parser * * Motivation: * Certain OpenGL features (e.g. transform feedback, performance monitoring) -- cgit v1.2.3 From d8d3d94b80aa1a1c0ca75c58b8abdc7356f38418 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 4 Mar 2014 21:27:34 -0500 Subject: pass iov_iter to ->direct_IO() unmodified, for now Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 3 +-- Documentation/filesystems/vfs.txt | 3 +-- drivers/staging/lustre/lustre/llite/rw26.c | 17 ++++++++--------- fs/9p/vfs_addr.c | 5 ++--- fs/block_dev.c | 9 +++++---- fs/btrfs/inode.c | 12 ++++++------ fs/ceph/addr.c | 4 ++-- fs/cifs/file.c | 4 ++-- fs/exofs/inode.c | 2 +- fs/ext2/inode.c | 11 ++++++----- fs/ext3/inode.c | 16 +++++++--------- fs/ext4/inode.c | 11 +++++------ fs/f2fs/data.c | 8 ++++---- fs/fat/inode.c | 13 +++++++------ fs/fuse/file.c | 10 +++++----- fs/gfs2/aops.c | 11 +++++------ fs/hfs/inode.c | 8 ++++---- fs/hfsplus/inode.c | 6 +++--- fs/jfs/inode.c | 8 ++++---- fs/nfs/direct.c | 8 ++++---- fs/nilfs2/inode.c | 10 +++++----- fs/ocfs2/aops.c | 7 +++---- fs/reiserfs/inode.c | 9 ++++----- fs/udf/file.c | 4 ++-- fs/udf/inode.c | 8 ++++---- fs/xfs/xfs_aops.c | 15 +++++++-------- include/linux/fs.h | 3 +-- include/linux/nfs_fs.h | 3 +-- mm/filemap.c | 9 ++++----- mm/page_io.c | 6 ++++-- 30 files changed, 117 insertions(+), 126 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index eba790134253..9b0d5a33c8bf 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -196,8 +196,7 @@ prototypes: void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - int (*direct_IO)(int, struct kiocb *, const struct iovec *iov, - loff_t offset, unsigned long nr_segs); + int (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset); int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **, unsigned long *); int (*migratepage)(struct address_space *, struct page *, struct page *); diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 617f6d70c077..1846374a5add 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -589,8 +589,7 @@ struct address_space_operations { void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, int); void (*freepage)(struct page *); - ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, - loff_t offset, unsigned long nr_segs); + ssize_t (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset); struct page* (*get_xip_page)(struct address_space *, sector_t, int); /* migrate the contents of a page to the specified target */ diff --git a/drivers/staging/lustre/lustre/llite/rw26.c b/drivers/staging/lustre/lustre/llite/rw26.c index 7e3e0967993b..66e05c6f4d27 100644 --- a/drivers/staging/lustre/lustre/llite/rw26.c +++ b/drivers/staging/lustre/lustre/llite/rw26.c @@ -363,15 +363,14 @@ static ssize_t ll_direct_IO_26_seg(const struct lu_env *env, struct cl_io *io, #define MAX_DIO_SIZE ((MAX_MALLOC / sizeof(struct brw_page) * PAGE_CACHE_SIZE) & \ ~(DT_MAX_BRW_SIZE - 1)) static ssize_t ll_direct_IO_26(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t file_offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t file_offset) { struct lu_env *env; struct cl_io *io; struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; struct ccc_object *obj = cl_inode2ccc(inode); - long count = iov_length(iov, nr_segs); + long count = iov_length(iter->iov, iter->nr_segs); long tot_bytes = 0, result = 0; struct ll_inode_info *lli = ll_i2info(inode); unsigned long seg = 0; @@ -392,9 +391,9 @@ static ssize_t ll_direct_IO_26(int rw, struct kiocb *iocb, MAX_DIO_SIZE >> PAGE_CACHE_SHIFT); /* Check that all user buffers are aligned as well */ - for (seg = 0; seg < nr_segs; seg++) { - if (((unsigned long)iov[seg].iov_base & ~CFS_PAGE_MASK) || - (iov[seg].iov_len & ~CFS_PAGE_MASK)) + for (seg = 0; seg < iter->nr_segs; seg++) { + if (((unsigned long)iter->iov[seg].iov_base & ~CFS_PAGE_MASK) || + (iter->iov[seg].iov_len & ~CFS_PAGE_MASK)) return -EINVAL; } @@ -411,9 +410,9 @@ static ssize_t ll_direct_IO_26(int rw, struct kiocb *iocb, mutex_lock(&inode->i_mutex); LASSERT(obj->cob_transient_pages == 0); - for (seg = 0; seg < nr_segs; seg++) { - long iov_left = iov[seg].iov_len; - unsigned long user_addr = (unsigned long)iov[seg].iov_base; + for (seg = 0; seg < iter->nr_segs; seg++) { + long iov_left = iter->iov[seg].iov_len; + unsigned long user_addr = (unsigned long)iter->iov[seg].iov_base; if (rw == READ) { if (file_offset >= i_size_read(inode)) diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c index c71e88602ff4..cc1cfae726b3 100644 --- a/fs/9p/vfs_addr.c +++ b/fs/9p/vfs_addr.c @@ -259,8 +259,7 @@ static int v9fs_launder_page(struct page *page) * */ static ssize_t -v9fs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t pos, unsigned long nr_segs) +v9fs_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, loff_t pos) { /* * FIXME @@ -269,7 +268,7 @@ v9fs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, */ p9_debug(P9_DEBUG_VFS, "v9fs_direct_IO: v9fs_direct_IO (%s) off/no(%lld/%lu) EINVAL\n", iocb->ki_filp->f_path.dentry->d_name.name, - (long long)pos, nr_segs); + (long long)pos, iter->nr_segs); return -EINVAL; } diff --git a/fs/block_dev.c b/fs/block_dev.c index 552a8d13bc32..938fc707d769 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -165,14 +165,15 @@ blkdev_get_block(struct inode *inode, sector_t iblock, } static ssize_t -blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t offset, unsigned long nr_segs) +blkdev_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iov, offset, - nr_segs, blkdev_get_block, NULL, NULL, 0); + return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iter->iov, + offset, iter->nr_segs, blkdev_get_block, + NULL, NULL, 0); } int __sync_blockdev(struct block_device *bdev, int wait) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5f805bc944fa..30a6cc51f32c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7433,8 +7433,7 @@ out: } static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; @@ -7444,8 +7443,8 @@ static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, bool relock = false; ssize_t ret; - if (check_direct_IO(BTRFS_I(inode)->root, rw, iocb, iov, - offset, nr_segs)) + if (check_direct_IO(BTRFS_I(inode)->root, rw, iocb, iter->iov, + offset, iter->nr_segs)) return 0; atomic_inc(&inode->i_dio_count); @@ -7457,7 +7456,7 @@ static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, * we need to flush the dirty pages again to make absolutely sure * that any outstanding dirty pages are on disk. */ - count = iov_length(iov, nr_segs); + count = iov_length(iter->iov, iter->nr_segs); if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT, &BTRFS_I(inode)->runtime_flags)) filemap_fdatawrite_range(inode->i_mapping, offset, count); @@ -7484,7 +7483,8 @@ static ssize_t btrfs_direct_IO(int rw, struct kiocb *iocb, ret = __blockdev_direct_IO(rw, iocb, inode, BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev, - iov, offset, nr_segs, btrfs_get_blocks_direct, NULL, + iter->iov, offset, iter->nr_segs, + btrfs_get_blocks_direct, NULL, btrfs_submit_direct, flags); if (rw & WRITE) { if (ret < 0 && ret != -EIOCBQUEUED) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index b53278c9fd97..342ca5e423f9 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -1187,8 +1187,8 @@ static int ceph_write_end(struct file *file, struct address_space *mapping, * never get called. */ static ssize_t ceph_direct_io(int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t pos, unsigned long nr_segs) + struct iov_iter *iter, + loff_t pos) { WARN_ON(1); return -EINVAL; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 2900d150654e..a4ccc39e6c11 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3702,8 +3702,8 @@ void cifs_oplock_break(struct work_struct *work) * Direct IO is not yet supported in the cached mode. */ static ssize_t -cifs_direct_io(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t pos, unsigned long nr_segs) +cifs_direct_io(int rw, struct kiocb *iocb, struct iov_iter *iter, + loff_t pos) { /* * FIXME diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index d1c244d67667..3f9cafd73931 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -964,7 +964,7 @@ static void exofs_invalidatepage(struct page *page, unsigned int offset, /* TODO: Should be easy enough to do proprly */ static ssize_t exofs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { return 0; } diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c index b1d2a4675d42..47fbe760a7f8 100644 --- a/fs/ext2/inode.c +++ b/fs/ext2/inode.c @@ -850,18 +850,19 @@ static sector_t ext2_bmap(struct address_space *mapping, sector_t block) } static ssize_t -ext2_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t offset, unsigned long nr_segs) +ext2_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; struct inode *inode = mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - ext2_get_block); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, ext2_get_block); if (ret < 0 && (rw & WRITE)) - ext2_write_failed(mapping, offset + iov_length(iov, nr_segs)); + ext2_write_failed(mapping, offset + + iov_length(iter->iov, iter->nr_segs)); return ret; } diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index f5157d0d1b43..7a5c501dc31b 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1820,8 +1820,7 @@ static int ext3_releasepage(struct page *page, gfp_t wait) * VFS code falls back into buffered path in that case so we are safe. */ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; @@ -1829,10 +1828,10 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, handle_t *handle; ssize_t ret; int orphan = 0; - size_t count = iov_length(iov, nr_segs); + size_t count = iov_length(iter->iov, iter->nr_segs); int retries = 0; - trace_ext3_direct_IO_enter(inode, offset, iov_length(iov, nr_segs), rw); + trace_ext3_direct_IO_enter(inode, offset, count, rw); if (rw == WRITE) { loff_t final_size = offset + count; @@ -1856,15 +1855,15 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } retry: - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - ext3_get_block); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, ext3_get_block); /* * In case of error extending write may have instantiated a few * blocks outside i_size. Trim these off again. */ if (unlikely((rw & WRITE) && ret < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + count; if (end > isize) ext3_truncate_failed_direct_write(inode); @@ -1909,8 +1908,7 @@ retry: ret = err; } out: - trace_ext3_direct_IO_exit(inode, offset, - iov_length(iov, nr_segs), rw, ret); + trace_ext3_direct_IO_exit(inode, offset, count, rw, ret); return ret; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d7b7462a0e13..f51db730da39 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3222,8 +3222,7 @@ retake_lock: } static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; @@ -3239,13 +3238,13 @@ static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, if (ext4_has_inline_data(inode)) return 0; - trace_ext4_direct_IO_enter(inode, offset, iov_length(iov, nr_segs), rw); + trace_ext4_direct_IO_enter(inode, offset, iov_length(iter->iov, iter->nr_segs), rw); if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) - ret = ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs); + ret = ext4_ext_direct_IO(rw, iocb, iter->iov, offset, iter->nr_segs); else - ret = ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); + ret = ext4_ind_direct_IO(rw, iocb, iter->iov, offset, iter->nr_segs); trace_ext4_direct_IO_exit(inode, offset, - iov_length(iov, nr_segs), rw, ret); + iov_length(iter->iov, iter->nr_segs), rw, ret); return ret; } diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 45abd60e2bff..3a6ef121c095 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -1010,7 +1010,7 @@ static int check_direct_IO(struct inode *inode, int rw, } static ssize_t f2fs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; @@ -1019,11 +1019,11 @@ static ssize_t f2fs_direct_IO(int rw, struct kiocb *iocb, if (f2fs_has_inline_data(inode)) return 0; - if (check_direct_IO(inode, rw, iov, offset, nr_segs)) + if (check_direct_IO(inode, rw, iter->iov, offset, iter->nr_segs)) return 0; - return blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - get_data_block); + return blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, get_data_block); } static void f2fs_invalidate_data_page(struct page *page, unsigned int offset, diff --git a/fs/fat/inode.c b/fs/fat/inode.c index b3361fe2bcb5..d5237a199055 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -185,8 +185,8 @@ static int fat_write_end(struct file *file, struct address_space *mapping, } static ssize_t fat_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; @@ -203,7 +203,7 @@ static ssize_t fat_direct_IO(int rw, struct kiocb *iocb, * * Return 0, and fallback to normal buffered write. */ - loff_t size = offset + iov_length(iov, nr_segs); + loff_t size = offset + iov_length(iter->iov, iter->nr_segs); if (MSDOS_I(inode)->mmu_private < size) return 0; } @@ -212,10 +212,11 @@ static ssize_t fat_direct_IO(int rw, struct kiocb *iocb, * FAT need to use the DIO_LOCKING for avoiding the race * condition of fat_get_block() and ->truncate(). */ - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - fat_get_block); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, fat_get_block); if (ret < 0 && (rw & WRITE)) - fat_write_failed(mapping, offset + iov_length(iov, nr_segs)); + fat_write_failed(mapping, offset + + iov_length(iter->iov, iter->nr_segs)); return ret; } diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 9c7f346879e7..17d96f36df15 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2890,8 +2890,8 @@ static inline loff_t fuse_round_up(loff_t off) } static ssize_t -fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t offset, unsigned long nr_segs) +fuse_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, + loff_t offset) { ssize_t ret = 0; struct file *file = iocb->ki_filp; @@ -2900,7 +2900,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t pos = 0; struct inode *inode; loff_t i_size; - size_t count = iov_length(iov, nr_segs); + size_t count = iov_length(iter->iov, iter->nr_segs); struct fuse_io_priv *io; pos = offset; @@ -2944,9 +2944,9 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, io->async = false; if (rw == WRITE) - ret = __fuse_direct_write(io, iov, nr_segs, &pos); + ret = __fuse_direct_write(io, iter->iov, iter->nr_segs, &pos); else - ret = __fuse_direct_read(io, iov, nr_segs, &pos, count); + ret = __fuse_direct_read(io, iter->iov, iter->nr_segs, &pos, count); if (io->async) { fuse_aio_complete(io, ret < 0 ? ret : 0, -1); diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c index ce62dcac90b6..e84ddaa42104 100644 --- a/fs/gfs2/aops.c +++ b/fs/gfs2/aops.c @@ -1041,8 +1041,7 @@ static int gfs2_ok_for_dio(struct gfs2_inode *ip, int rw, loff_t offset) static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; @@ -1082,7 +1081,7 @@ static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb, */ if (mapping->nrpages) { loff_t lstart = offset & (PAGE_CACHE_SIZE - 1); - loff_t len = iov_length(iov, nr_segs); + loff_t len = iov_length(iter->iov, iter->nr_segs); loff_t end = PAGE_ALIGN(offset + len) - 1; rv = 0; @@ -1097,9 +1096,9 @@ static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb, truncate_inode_pages_range(mapping, lstart, end); } - rv = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, - offset, nr_segs, gfs2_get_block_direct, - NULL, NULL, 0); + rv = __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, + iter->iov, offset, iter->nr_segs, + gfs2_get_block_direct, NULL, NULL, 0); out: gfs2_glock_dq(&gh); gfs2_holder_uninit(&gh); diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c index 9e2fecd62f62..09cff13528c5 100644 --- a/fs/hfs/inode.c +++ b/fs/hfs/inode.c @@ -125,15 +125,15 @@ static int hfs_releasepage(struct page *page, gfp_t mask) } static ssize_t hfs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; struct inode *inode = file_inode(file)->i_mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - hfs_get_block); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, hfs_get_block); /* * In case of error extending write may have instantiated a few @@ -141,7 +141,7 @@ static ssize_t hfs_direct_IO(int rw, struct kiocb *iocb, */ if (unlikely((rw & WRITE) && ret < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + iov_length(iter->iov, iter->nr_segs); if (end > isize) hfs_write_failed(mapping, end); diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c index a4f45bd88a63..7f894a5b5eaf 100644 --- a/fs/hfsplus/inode.c +++ b/fs/hfsplus/inode.c @@ -123,14 +123,14 @@ static int hfsplus_releasepage(struct page *page, gfp_t mask) } static ssize_t hfsplus_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; struct inode *inode = file_inode(file)->i_mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, iter->nr_segs, hfsplus_get_block); /* @@ -139,7 +139,7 @@ static ssize_t hfsplus_direct_IO(int rw, struct kiocb *iocb, */ if (unlikely((rw & WRITE) && ret < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + iov_length(iter->iov, iter->nr_segs); if (end > isize) hfsplus_write_failed(mapping, end); diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c index 6f8fe72c2a7a..7052744d5107 100644 --- a/fs/jfs/inode.c +++ b/fs/jfs/inode.c @@ -331,15 +331,15 @@ static sector_t jfs_bmap(struct address_space *mapping, sector_t block) } static ssize_t jfs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; struct inode *inode = file->f_mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - jfs_get_block); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, jfs_get_block); /* * In case of error extending write may have instantiated a few @@ -347,7 +347,7 @@ static ssize_t jfs_direct_IO(int rw, struct kiocb *iocb, */ if (unlikely((rw & WRITE) && ret < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + iov_length(iter->iov, iter->nr_segs); if (end > isize) jfs_write_failed(mapping, end); diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index b8797ae6831f..e9cde3935001 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -121,20 +121,20 @@ static inline int put_dreq(struct nfs_direct_req *dreq) * shunt off direct read and write requests before the VFS gets them, * so this method is only ever called for swap. */ -ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t pos, unsigned long nr_segs) +ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, loff_t pos) { #ifndef CONFIG_NFS_SWAP dprintk("NFS: nfs_direct_IO (%pD) off/no(%Ld/%lu) EINVAL\n", - iocb->ki_filp, (long long) pos, nr_segs); + iocb->ki_filp, (long long) pos, iter->nr_segs); return -EINVAL; #else VM_BUG_ON(iocb->ki_nbytes != PAGE_SIZE); if (rw == READ || rw == KERNEL_READ) - return nfs_file_direct_read(iocb, iov, nr_segs, pos, + return nfs_file_direct_read(iocb, iter->iov, iter->nr_segs, pos, rw == READ ? true : false); - return nfs_file_direct_write(iocb, iov, nr_segs, pos, + return nfs_file_direct_write(iocb, iter->iov, iter->nr_segs, pos, rw == WRITE ? true : false); #endif /* CONFIG_NFS_SWAP */ } diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index b9c5726120e3..1c0e8fedc095 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -298,8 +298,8 @@ static int nilfs_write_end(struct file *file, struct address_space *mapping, } static ssize_t -nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, - loff_t offset, unsigned long nr_segs) +nilfs_direct_IO(int rw, struct kiocb *iocb, struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; @@ -310,8 +310,8 @@ nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, return 0; /* Needs synchronization with the cleaner */ - size = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - nilfs_get_block); + size = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, nilfs_get_block); /* * In case of error extending write may have instantiated a few @@ -319,7 +319,7 @@ nilfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, */ if (unlikely((rw & WRITE) && size < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + iov_length(iter->iov, iter->nr_segs); if (end > isize) nilfs_write_failed(mapping, end); diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index d310d12a9adc..799fd0afcb35 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -599,9 +599,8 @@ static int ocfs2_releasepage(struct page *page, gfp_t wait) static ssize_t ocfs2_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file_inode(file)->i_mapping->host; @@ -618,7 +617,7 @@ static ssize_t ocfs2_direct_IO(int rw, return 0; return __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, - iov, offset, nr_segs, + iter->iov, offset, iter->nr_segs, ocfs2_direct_IO_get_blocks, ocfs2_dio_end_io, NULL, 0); } diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index bc8b8009897d..17bf4c41a509 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -3083,15 +3083,14 @@ static int reiserfs_releasepage(struct page *page, gfp_t unused_gfp_flags) /* We thank Mingming Cao for helping us understand in great detail what to do in this section of the code. */ static ssize_t reiserfs_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, loff_t offset) { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - reiserfs_get_blocks_direct_io); + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, + iter->nr_segs, reiserfs_get_blocks_direct_io); /* * In case of error extending write may have instantiated a few @@ -3099,7 +3098,7 @@ static ssize_t reiserfs_direct_IO(int rw, struct kiocb *iocb, */ if (unlikely((rw & WRITE) && ret < 0)) { loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); + loff_t end = offset + iov_length(iter->iov, iter->nr_segs); if ((end > isize) && inode_newsize_ok(inode, isize) == 0) { truncate_setsize(inode, isize); diff --git a/fs/udf/file.c b/fs/udf/file.c index d2c170f8b035..ade886401658 100644 --- a/fs/udf/file.c +++ b/fs/udf/file.c @@ -119,8 +119,8 @@ static int udf_adinicb_write_end(struct file *file, } static ssize_t udf_adinicb_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, + loff_t offset) { /* Fallback to buffered I/O. */ return 0; diff --git a/fs/udf/inode.c b/fs/udf/inode.c index 5d643706212f..5b184c7f7dcb 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -217,18 +217,18 @@ static int udf_write_begin(struct file *file, struct address_space *mapping, } static ssize_t udf_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t offset, unsigned long nr_segs) + struct iov_iter *iter, + loff_t offset) { struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; struct inode *inode = mapping->host; ssize_t ret; - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, + ret = blockdev_direct_IO(rw, iocb, inode, iter->iov, offset, iter->nr_segs, udf_get_block); if (unlikely(ret < 0 && (rw & WRITE))) - udf_write_failed(mapping, offset + iov_length(iov, nr_segs)); + udf_write_failed(mapping, offset + iov_length(iter->iov, iter->nr_segs)); return ret; } diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 0479c32c5eb1..330d7b1c4be3 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1449,9 +1449,8 @@ STATIC ssize_t xfs_vm_direct_IO( int rw, struct kiocb *iocb, - const struct iovec *iov, - loff_t offset, - unsigned long nr_segs) + struct iov_iter *iter, + loff_t offset) { struct inode *inode = iocb->ki_filp->f_mapping->host; struct block_device *bdev = xfs_find_bdev_for_inode(inode); @@ -1459,7 +1458,7 @@ xfs_vm_direct_IO( ssize_t ret; if (rw & WRITE) { - size_t size = iov_length(iov, nr_segs); + size_t size = iov_length(iter->iov, iter->nr_segs); /* * We cannot preallocate a size update transaction here as we @@ -1471,16 +1470,16 @@ xfs_vm_direct_IO( if (offset + size > XFS_I(inode)->i_d.di_size) ioend->io_isdirect = 1; - ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov, - offset, nr_segs, + ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iter->iov, + offset, iter->nr_segs, xfs_get_blocks_direct, xfs_end_io_direct_write, NULL, DIO_ASYNC_EXTEND); if (ret != -EIOCBQUEUED && iocb->private) goto out_destroy_ioend; } else { - ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iov, - offset, nr_segs, + ret = __blockdev_direct_IO(rw, iocb, inode, bdev, iter->iov, + offset, iter->nr_segs, xfs_get_blocks_direct, NULL, NULL, 0); } diff --git a/include/linux/fs.h b/include/linux/fs.h index 796de742fe4a..399a338c92b5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -343,8 +343,7 @@ struct address_space_operations { void (*invalidatepage) (struct page *, unsigned int, unsigned int); int (*releasepage) (struct page *, gfp_t); void (*freepage)(struct page *); - ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, - loff_t offset, unsigned long nr_segs); + ssize_t (*direct_IO)(int, struct kiocb *, struct iov_iter *iter, loff_t offset); int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **, unsigned long *); /* diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index fa6918b0f829..5a0d78ec739d 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -459,8 +459,7 @@ extern int nfs3_removexattr (struct dentry *, const char *name); /* * linux/fs/nfs/direct.c */ -extern ssize_t nfs_direct_IO(int, struct kiocb *, const struct iovec *, loff_t, - unsigned long); +extern ssize_t nfs_direct_IO(int, struct kiocb *, struct iov_iter *, loff_t); extern ssize_t nfs_file_direct_read(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos, bool uio); diff --git a/mm/filemap.c b/mm/filemap.c index 7c1417b0bd7b..139641274f1e 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1699,10 +1699,9 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov, size = i_size_read(inode); retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); - if (!retval) { - retval = mapping->a_ops->direct_IO(READ, iocb, - iov, pos, nr_segs); - } + if (!retval) + retval = mapping->a_ops->direct_IO(READ, iocb, &i, pos); + if (retval > 0) { *ppos = pos + retval; count -= retval; @@ -2383,7 +2382,7 @@ generic_file_direct_write(struct kiocb *iocb, struct iov_iter *from, } } - written = mapping->a_ops->direct_IO(WRITE, iocb, from->iov, pos, from->nr_segs); + written = mapping->a_ops->direct_IO(WRITE, iocb, from, pos); /* * Finally, try again to invalidate clean pages which might have been diff --git a/mm/page_io.c b/mm/page_io.c index 7c59ef681381..0ed0644c73db 100644 --- a/mm/page_io.c +++ b/mm/page_io.c @@ -263,16 +263,18 @@ int __swap_writepage(struct page *page, struct writeback_control *wbc, .iov_base = kmap(page), .iov_len = PAGE_SIZE, }; + struct iov_iter from; init_sync_kiocb(&kiocb, swap_file); kiocb.ki_pos = page_file_offset(page); kiocb.ki_nbytes = PAGE_SIZE; + iov_iter_init(&from, &iov, 1, PAGE_SIZE, 0); set_page_writeback(page); unlock_page(page); ret = mapping->a_ops->direct_IO(KERNEL_WRITE, - &kiocb, &iov, - kiocb.ki_pos, 1); + &kiocb, &from, + kiocb.ki_pos); kunmap(page); if (ret == PAGE_SIZE) { count_vm_event(PSWPOUT); -- cgit v1.2.3 From 293bc9822fa9b3c9d4b7893bcb241e085580771a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 11 Feb 2014 18:37:41 -0500 Subject: new methods: ->read_iter() and ->write_iter() Beginning to introduce those. Just the callers for now, and it's clumsier than it'll eventually become; once we finish converting aio_read and aio_write instances, the things will get nicer. For now, these guys are in parallel to ->aio_read() and ->aio_write(); they take iocb and iov_iter, with everything in iov_iter already validated. File offset is passed in iocb->ki_pos, iov/nr_segs - in iov_iter. Main concerns in that series are stack footprint and ability to split the damn thing cleanly. [fix from Peter Ujfalusi folded] Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 2 + Documentation/filesystems/vfs.txt | 10 ++++- fs/aio.c | 14 +++++- fs/file_table.c | 6 ++- fs/open.c | 6 ++- fs/read_write.c | 90 ++++++++++++++++++++++++++++++++++++--- include/linux/fs.h | 6 +++ 7 files changed, 121 insertions(+), 13 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 9b0d5a33c8bf..b18dd1779029 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -430,6 +430,8 @@ prototypes: ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 1846374a5add..a1d0d7a30165 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -806,6 +806,8 @@ struct file_operations { ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); @@ -836,11 +838,15 @@ otherwise noted. read: called by read(2) and related system calls - aio_read: called by io_submit(2) and other asynchronous I/O operations + aio_read: vectored, possibly asynchronous read + + read_iter: possibly asynchronous read with iov_iter as destination write: called by write(2) and related system calls - aio_write: called by io_submit(2) and other asynchronous I/O operations + aio_write: vectored, possibly asynchronous write + + write_iter: possibly asynchronous write with iov_iter as source iterate: called when the VFS needs to read the directory contents diff --git a/fs/aio.c b/fs/aio.c index a0ed6c7d2cd2..56b28607c32d 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1241,6 +1241,7 @@ SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx) typedef ssize_t (aio_rw_op)(struct kiocb *, const struct iovec *, unsigned long, loff_t); +typedef ssize_t (rw_iter_op)(struct kiocb *, struct iov_iter *); static ssize_t aio_setup_vectored_rw(struct kiocb *kiocb, int rw, char __user *buf, @@ -1298,7 +1299,9 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, int rw; fmode_t mode; aio_rw_op *rw_op; + rw_iter_op *iter_op; struct iovec inline_vec, *iovec = &inline_vec; + struct iov_iter iter; switch (opcode) { case IOCB_CMD_PREAD: @@ -1306,6 +1309,7 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, mode = FMODE_READ; rw = READ; rw_op = file->f_op->aio_read; + iter_op = file->f_op->read_iter; goto rw_common; case IOCB_CMD_PWRITE: @@ -1313,12 +1317,13 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, mode = FMODE_WRITE; rw = WRITE; rw_op = file->f_op->aio_write; + iter_op = file->f_op->write_iter; goto rw_common; rw_common: if (unlikely(!(file->f_mode & mode))) return -EBADF; - if (!rw_op) + if (!rw_op && !iter_op) return -EINVAL; ret = (opcode == IOCB_CMD_PREADV || @@ -1347,7 +1352,12 @@ rw_common: if (rw == WRITE) file_start_write(file); - ret = rw_op(req, iovec, nr_segs, req->ki_pos); + if (iter_op) { + iov_iter_init(&iter, rw, iovec, nr_segs, req->ki_nbytes); + ret = iter_op(req, &iter); + } else { + ret = rw_op(req, iovec, nr_segs, req->ki_pos); + } if (rw == WRITE) file_end_write(file); diff --git a/fs/file_table.c b/fs/file_table.c index be73cbc48c12..f8cc881fbbfb 100644 --- a/fs/file_table.c +++ b/fs/file_table.c @@ -175,9 +175,11 @@ struct file *alloc_file(struct path *path, fmode_t mode, file->f_path = *path; file->f_inode = path->dentry->d_inode; file->f_mapping = path->dentry->d_inode->i_mapping; - if ((mode & FMODE_READ) && likely(fop->read || fop->aio_read)) + if ((mode & FMODE_READ) && + likely(fop->read || fop->aio_read || fop->read_iter)) mode |= FMODE_CAN_READ; - if ((mode & FMODE_WRITE) && likely(fop->write || fop->aio_write)) + if ((mode & FMODE_WRITE) && + likely(fop->write || fop->aio_write || fop->write_iter)) mode |= FMODE_CAN_WRITE; file->f_mode = mode; file->f_op = fop; diff --git a/fs/open.c b/fs/open.c index 39d3d0468ee6..36662d036237 100644 --- a/fs/open.c +++ b/fs/open.c @@ -725,9 +725,11 @@ static int do_dentry_open(struct file *f, } if ((f->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) i_readcount_inc(inode); - if ((f->f_mode & FMODE_READ) && likely(f->f_op->read || f->f_op->aio_read)) + if ((f->f_mode & FMODE_READ) && + likely(f->f_op->read || f->f_op->aio_read || f->f_op->read_iter)) f->f_mode |= FMODE_CAN_READ; - if ((f->f_mode & FMODE_WRITE) && likely(f->f_op->write || f->f_op->aio_write)) + if ((f->f_mode & FMODE_WRITE) && + likely(f->f_op->write || f->f_op->aio_write || f->f_op->write_iter)) f->f_mode |= FMODE_CAN_WRITE; f->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC); diff --git a/fs/read_write.c b/fs/read_write.c index d29d2a361d2c..fe2f9d5e3536 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -25,6 +25,7 @@ typedef ssize_t (*io_fn_t)(struct file *, char __user *, size_t, loff_t *); typedef ssize_t (*iov_fn_t)(struct kiocb *, const struct iovec *, unsigned long, loff_t); +typedef ssize_t (*iter_fn_t)(struct kiocb *, struct iov_iter *); const struct file_operations generic_ro_fops = { .llseek = generic_file_llseek, @@ -390,6 +391,27 @@ ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *pp EXPORT_SYMBOL(do_sync_read); +ssize_t new_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos) +{ + struct iovec iov = { .iov_base = buf, .iov_len = len }; + struct kiocb kiocb; + struct iov_iter iter; + ssize_t ret; + + init_sync_kiocb(&kiocb, filp); + kiocb.ki_pos = *ppos; + kiocb.ki_nbytes = len; + iov_iter_init(&iter, READ, &iov, 1, len); + + ret = filp->f_op->read_iter(&kiocb, &iter); + if (-EIOCBQUEUED == ret) + ret = wait_on_sync_kiocb(&kiocb); + *ppos = kiocb.ki_pos; + return ret; +} + +EXPORT_SYMBOL(new_sync_read); + ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { ssize_t ret; @@ -406,8 +428,10 @@ ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) count = ret; if (file->f_op->read) ret = file->f_op->read(file, buf, count, pos); - else + else if (file->f_op->aio_read) ret = do_sync_read(file, buf, count, pos); + else + ret = new_sync_read(file, buf, count, pos); if (ret > 0) { fsnotify_access(file); add_rchar(current, ret); @@ -439,6 +463,27 @@ ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, lof EXPORT_SYMBOL(do_sync_write); +ssize_t new_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos) +{ + struct iovec iov = { .iov_base = (void __user *)buf, .iov_len = len }; + struct kiocb kiocb; + struct iov_iter iter; + ssize_t ret; + + init_sync_kiocb(&kiocb, filp); + kiocb.ki_pos = *ppos; + kiocb.ki_nbytes = len; + iov_iter_init(&iter, WRITE, &iov, 1, len); + + ret = filp->f_op->write_iter(&kiocb, &iter); + if (-EIOCBQUEUED == ret) + ret = wait_on_sync_kiocb(&kiocb); + *ppos = kiocb.ki_pos; + return ret; +} + +EXPORT_SYMBOL(new_sync_write); + ssize_t __kernel_write(struct file *file, const char *buf, size_t count, loff_t *pos) { mm_segment_t old_fs; @@ -455,8 +500,10 @@ ssize_t __kernel_write(struct file *file, const char *buf, size_t count, loff_t count = MAX_RW_COUNT; if (file->f_op->write) ret = file->f_op->write(file, p, count, pos); - else + else if (file->f_op->aio_write) ret = do_sync_write(file, p, count, pos); + else + ret = new_sync_write(file, p, count, pos); set_fs(old_fs); if (ret > 0) { fsnotify_modify(file); @@ -483,8 +530,10 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_ file_start_write(file); if (file->f_op->write) ret = file->f_op->write(file, buf, count, pos); - else + else if (file->f_op->aio_write) ret = do_sync_write(file, buf, count, pos); + else + ret = new_sync_write(file, buf, count, pos); if (ret > 0) { fsnotify_modify(file); add_wchar(current, ret); @@ -601,6 +650,25 @@ unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to) } EXPORT_SYMBOL(iov_shorten); +static ssize_t do_iter_readv_writev(struct file *filp, int rw, const struct iovec *iov, + unsigned long nr_segs, size_t len, loff_t *ppos, iter_fn_t fn) +{ + struct kiocb kiocb; + struct iov_iter iter; + ssize_t ret; + + init_sync_kiocb(&kiocb, filp); + kiocb.ki_pos = *ppos; + kiocb.ki_nbytes = len; + + iov_iter_init(&iter, rw, iov, nr_segs, len); + ret = fn(&kiocb, &iter); + if (ret == -EIOCBQUEUED) + ret = wait_on_sync_kiocb(&kiocb); + *ppos = kiocb.ki_pos; + return ret; +} + static ssize_t do_sync_readv_writev(struct file *filp, const struct iovec *iov, unsigned long nr_segs, size_t len, loff_t *ppos, iov_fn_t fn) { @@ -738,6 +806,7 @@ static ssize_t do_readv_writev(int type, struct file *file, ssize_t ret; io_fn_t fn; iov_fn_t fnv; + iter_fn_t iter_fn; ret = rw_copy_check_uvector(type, uvector, nr_segs, ARRAY_SIZE(iovstack), iovstack, &iov); @@ -753,13 +822,18 @@ static ssize_t do_readv_writev(int type, struct file *file, if (type == READ) { fn = file->f_op->read; fnv = file->f_op->aio_read; + iter_fn = file->f_op->read_iter; } else { fn = (io_fn_t)file->f_op->write; fnv = file->f_op->aio_write; + iter_fn = file->f_op->write_iter; file_start_write(file); } - if (fnv) + if (iter_fn) + ret = do_iter_readv_writev(file, type, iov, nr_segs, tot_len, + pos, iter_fn); + else if (fnv) ret = do_sync_readv_writev(file, iov, nr_segs, tot_len, pos, fnv); else @@ -912,6 +986,7 @@ static ssize_t compat_do_readv_writev(int type, struct file *file, ssize_t ret; io_fn_t fn; iov_fn_t fnv; + iter_fn_t iter_fn; ret = compat_rw_copy_check_uvector(type, uvector, nr_segs, UIO_FASTIOV, iovstack, &iov); @@ -927,13 +1002,18 @@ static ssize_t compat_do_readv_writev(int type, struct file *file, if (type == READ) { fn = file->f_op->read; fnv = file->f_op->aio_read; + iter_fn = file->f_op->read_iter; } else { fn = (io_fn_t)file->f_op->write; fnv = file->f_op->aio_write; + iter_fn = file->f_op->write_iter; file_start_write(file); } - if (fnv) + if (iter_fn) + ret = do_iter_readv_writev(file, type, iov, nr_segs, tot_len, + pos, iter_fn); + else if (fnv) ret = do_sync_readv_writev(file, iov, nr_segs, tot_len, pos, fnv); else diff --git a/include/linux/fs.h b/include/linux/fs.h index 75eb71357adf..17535e0a4547 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1451,6 +1451,8 @@ struct block_device_operations; #define HAVE_COMPAT_IOCTL 1 #define HAVE_UNLOCKED_IOCTL 1 +struct iov_iter; + struct file_operations { struct module *owner; loff_t (*llseek) (struct file *, loff_t, int); @@ -1458,6 +1460,8 @@ struct file_operations { ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); int (*iterate) (struct file *, struct dir_context *); unsigned int (*poll) (struct file *, struct poll_table_struct *); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); @@ -2415,6 +2419,8 @@ extern ssize_t generic_file_direct_write(struct kiocb *, struct iov_iter *, loff extern ssize_t generic_perform_write(struct file *, struct iov_iter *, loff_t); extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos); extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos); +extern ssize_t new_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos); +extern ssize_t new_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos); /* fs/block_dev.c */ extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, -- cgit v1.2.3 From 4b405efbe12de28b26289282b431323d73992381 Mon Sep 17 00:00:00 2001 From: Hubert Chaumette Date: Tue, 6 May 2014 09:40:16 +0200 Subject: Update Micrel KSZ90x1 binding documentation Renames micrel-ksz9021.txt to micrel-ksz90x1.txt and adds documentation for the KSZ9031 binding from patch 1. Also adds step increment information, and note about phy fixups. Signed-off-by: Hubert Chaumette Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- .../devicetree/bindings/net/micrel-ksz9021.txt | 49 ------------- .../devicetree/bindings/net/micrel-ksz90x1.txt | 83 ++++++++++++++++++++++ 2 files changed, 83 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/micrel-ksz9021.txt create mode 100644 Documentation/devicetree/bindings/net/micrel-ksz90x1.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt b/Documentation/devicetree/bindings/net/micrel-ksz9021.txt deleted file mode 100644 index 997a63f1aea1..000000000000 --- a/Documentation/devicetree/bindings/net/micrel-ksz9021.txt +++ /dev/null @@ -1,49 +0,0 @@ -Micrel KSZ9021 Gigabit Ethernet PHY - -Some boards require special tuning values, particularly when it comes to -clock delays. You can specify clock delay values by adding -micrel-specific properties to an Ethernet OF device node. - -All skew control options are specified in picoseconds. The minimum -value is 0, and the maximum value is 3000. - -Optional properties: - - rxc-skew-ps : Skew control of RXC pad - - rxdv-skew-ps : Skew control of RX CTL pad - - txc-skew-ps : Skew control of TXC pad - - txen-skew-ps : Skew control of TX_CTL pad - - rxd0-skew-ps : Skew control of RX data 0 pad - - rxd1-skew-ps : Skew control of RX data 1 pad - - rxd2-skew-ps : Skew control of RX data 2 pad - - rxd3-skew-ps : Skew control of RX data 3 pad - - txd0-skew-ps : Skew control of TX data 0 pad - - txd1-skew-ps : Skew control of TX data 1 pad - - txd2-skew-ps : Skew control of TX data 2 pad - - txd3-skew-ps : Skew control of TX data 3 pad - -Examples: - - /* Attach to an Ethernet device with autodetected PHY */ - &enet { - rxc-skew-ps = <3000>; - rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; - txen-skew-ps = <0>; - status = "okay"; - }; - - /* Attach to an explicitly-specified PHY */ - mdio { - phy0: ethernet-phy@0 { - rxc-skew-ps = <3000>; - rxdv-skew-ps = <0>; - txc-skew-ps = <3000>; - txen-skew-ps = <0>; - reg = <0>; - }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt new file mode 100644 index 000000000000..692076fda0e5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt @@ -0,0 +1,83 @@ +Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY + +Some boards require special tuning values, particularly when it comes to +clock delays. You can specify clock delay values by adding +micrel-specific properties to an Ethernet OF device node. + +Note that these settings are applied after any phy-specific fixup from +phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c), +and therefore may overwrite them. + +KSZ9021: + + All skew control options are specified in picoseconds. The minimum + value is 0, the maximum value is 3000, and it is incremented by 200ps + steps. + + Optional properties: + + - rxc-skew-ps : Skew control of RXC pad + - rxdv-skew-ps : Skew control of RX CTL pad + - txc-skew-ps : Skew control of TXC pad + - txen-skew-ps : Skew control of TX CTL pad + - rxd0-skew-ps : Skew control of RX data 0 pad + - rxd1-skew-ps : Skew control of RX data 1 pad + - rxd2-skew-ps : Skew control of RX data 2 pad + - rxd3-skew-ps : Skew control of RX data 3 pad + - txd0-skew-ps : Skew control of TX data 0 pad + - txd1-skew-ps : Skew control of TX data 1 pad + - txd2-skew-ps : Skew control of TX data 2 pad + - txd3-skew-ps : Skew control of TX data 3 pad + +KSZ9031: + + All skew control options are specified in picoseconds. The minimum + value is 0, and the maximum is property-dependent. The increment + step is 60ps. + + Optional properties: + + Maximum value of 1860: + + - rxc-skew-ps : Skew control of RX clock pad + - txc-skew-ps : Skew control of TX clock pad + + Maximum value of 900: + + - rxdv-skew-ps : Skew control of RX CTL pad + - txen-skew-ps : Skew control of TX CTL pad + - rxd0-skew-ps : Skew control of RX data 0 pad + - rxd1-skew-ps : Skew control of RX data 1 pad + - rxd2-skew-ps : Skew control of RX data 2 pad + - rxd3-skew-ps : Skew control of RX data 3 pad + - txd0-skew-ps : Skew control of TX data 0 pad + - txd1-skew-ps : Skew control of TX data 1 pad + - txd2-skew-ps : Skew control of TX data 2 pad + - txd3-skew-ps : Skew control of TX data 3 pad + +Examples: + + /* Attach to an Ethernet device with autodetected PHY */ + &enet { + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + status = "okay"; + }; + + /* Attach to an explicitly-specified PHY */ + mdio { + phy0: ethernet-phy@0 { + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + reg = <0>; + }; + }; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; -- cgit v1.2.3 From b0571e7e4ec4d62b27711758417c388042f7bae7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Apr 2014 15:20:24 -0700 Subject: leds: leds-pwm: add DT support for LEDs wired to supply The non-DT driver allowed an active low property to be specified, but DT is missing this in its description. Add the property to the DT binding document, making it optional. It defaults to active high, which retains compatibility with existing descriptions. This should only be used for causes where the LED is wired to supply, and the PWM does not sensibly support its own inversion. Signed-off-by: Russell King Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/leds-pwm.txt | 2 ++ drivers/leds/leds-pwm.c | 1 + 2 files changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt index 7297107cf832..6c6583c35f2f 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm.txt +++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt @@ -13,6 +13,8 @@ LED sub-node properties: For the pwms and pwm-names property please refer to: Documentation/devicetree/bindings/pwm/pwm.txt - max-brightness : Maximum brightness possible for the LED +- active-low : (optional) For PWMs where the LED is wired to supply + rather than ground. - label : (optional) see Documentation/devicetree/bindings/leds/common.txt - linux,default-trigger : (optional) diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 8bd225df14de..f5cf1b0f2748 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -154,6 +154,7 @@ static int led_pwm_create_of(struct device *dev, struct led_pwm_priv *priv) led.default_trigger = of_get_property(child, "linux,default-trigger", NULL); + led.active_low = of_property_read_bool(child, "active-low"); of_property_read_u32(child, "max-brightness", &led.max_brightness); -- cgit v1.2.3 From 9ef8c877e4ffca969fb2f1260ee133b12b563c2c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 5 May 2014 04:46:54 -0700 Subject: leds: lp55xx: add DT bindings for LP55231 The TI55231 appears to be fully compatible to the 5523 model from National Semicondutor. This patch just adds DT bindings for it. Signed-off-by: Daniel Mack Acked-by: Milo Kim Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 8 +++++++- drivers/leds/leds-lp5523.c | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt index c55b8c016a9e..1b66a413fb9d 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -1,7 +1,13 @@ Binding for TI/National Semiconductor LP55xx Led Drivers Required properties: -- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501" +- compatible: one of + national,lp5521 + national,lp5523 + ti,lp55231 + ti,lp5562 + ti,lp8501 + - reg: I2C slave address - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index cb5ed82994ba..9e1716f8098c 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -1,5 +1,5 @@ /* - * lp5523.c - LP5523 LED Driver + * lp5523.c - LP5523, LP55231 LED Driver * * Copyright (C) 2010 Nokia Corporation * Copyright (C) 2012 Texas Instruments @@ -814,6 +814,7 @@ MODULE_DEVICE_TABLE(i2c, lp5523_id); #ifdef CONFIG_OF static const struct of_device_id of_lp5523_leds_match[] = { { .compatible = "national,lp5523", }, + { .compatible = "ti,lp55231", }, {}, }; -- cgit v1.2.3 From d415fa1b88748d664b7b6a310dd8e699d2686cf7 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 9 May 2014 19:07:34 +0530 Subject: drivers: net: cpsw-phy-sel: add dra7xx support for phy sel Add dra7xx support for selecting the phy mode which is present in control module of dra7xx SoC Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- .../devicetree/bindings/net/cpsw-phy-sel.txt | 3 +- drivers/net/ethernet/ti/cpsw-phy-sel.c | 57 +++++++++++++++++++++- 2 files changed, 58 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt index 7ff57a119f81..d9da911b6eea 100644 --- a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt +++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt @@ -2,7 +2,8 @@ TI CPSW Phy mode Selection Device Tree Bindings ----------------------------------------------- Required properties: -- compatible : Should be "ti,am3352-cpsw-phy-sel" +- compatible : Should be "ti,am3352-cpsw-phy-sel" for am335x platform and + "ti,dra7xx-cpsw-phy-sel" for dra7xx platform - reg : physical base address and size of the cpsw registers map - reg-names : names of the register map given in "reg" node diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index 86b5dce04642..b93838db9a72 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -29,6 +29,8 @@ #define AM33XX_GMII_SEL_RMII2_IO_CLK_EN BIT(7) #define AM33XX_GMII_SEL_RMII1_IO_CLK_EN BIT(6) +#define GMII_SEL_MODE_MASK 0x3 + struct cpsw_phy_sel_priv { struct device *dev; u32 __iomem *gmii_sel; @@ -65,7 +67,7 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv, break; }; - mask = 0x3 << (slave * 2) | BIT(slave + 6); + mask = GMII_SEL_MODE_MASK << (slave * 2) | BIT(slave + 6); mode <<= slave * 2; if (priv->rmii_clock_external) { @@ -81,6 +83,55 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv, writel(reg, priv->gmii_sel); } +static void cpsw_gmii_sel_dra7xx(struct cpsw_phy_sel_priv *priv, + phy_interface_t phy_mode, int slave) +{ + u32 reg; + u32 mask; + u32 mode = 0; + + reg = readl(priv->gmii_sel); + + switch (phy_mode) { + case PHY_INTERFACE_MODE_RMII: + mode = AM33XX_GMII_SEL_MODE_RMII; + break; + + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mode = AM33XX_GMII_SEL_MODE_RGMII; + break; + + case PHY_INTERFACE_MODE_MII: + default: + mode = AM33XX_GMII_SEL_MODE_MII; + break; + }; + + switch (slave) { + case 0: + mask = GMII_SEL_MODE_MASK; + break; + case 1: + mask = GMII_SEL_MODE_MASK << 4; + mode <<= 4; + break; + default: + dev_err(priv->dev, "invalid slave number...\n"); + return; + } + + if (priv->rmii_clock_external) + dev_err(priv->dev, "RMII External clock is not supported\n"); + + reg &= ~mask; + reg |= mode; + + writel(reg, priv->gmii_sel); +} + static struct platform_driver cpsw_phy_sel_driver; static int match(struct device *dev, void *data) { @@ -112,6 +163,10 @@ static const struct of_device_id cpsw_phy_sel_id_table[] = { .compatible = "ti,am3352-cpsw-phy-sel", .data = &cpsw_gmii_sel_am3352, }, + { + .compatible = "ti,dra7xx-cpsw-phy-sel", + .data = &cpsw_gmii_sel_dra7xx, + }, {} }; MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table); -- cgit v1.2.3 From b80b93096bc05f013418e315ccc544ce2e8efc28 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Fri, 9 May 2014 19:07:35 +0530 Subject: drivers: net: cpsw-phy-sel: add am43xx platform support AM43xx phy mode selection is similar to AM33xx platform, so adding only the compatibility string to the driver Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw-phy-sel.txt | 1 + drivers/net/ethernet/ti/cpsw-phy-sel.c | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt index d9da911b6eea..764c0c79b43d 100644 --- a/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt +++ b/Documentation/devicetree/bindings/net/cpsw-phy-sel.txt @@ -4,6 +4,7 @@ TI CPSW Phy mode Selection Device Tree Bindings Required properties: - compatible : Should be "ti,am3352-cpsw-phy-sel" for am335x platform and "ti,dra7xx-cpsw-phy-sel" for dra7xx platform + "ti,am43xx-cpsw-phy-sel" for am43xx platform - reg : physical base address and size of the cpsw registers map - reg-names : names of the register map given in "reg" node diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index b93838db9a72..aa8bf45e53dc 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -167,6 +167,10 @@ static const struct of_device_id cpsw_phy_sel_id_table[] = { .compatible = "ti,dra7xx-cpsw-phy-sel", .data = &cpsw_gmii_sel_dra7xx, }, + { + .compatible = "ti,am43xx-cpsw-phy-sel", + .data = &cpsw_gmii_sel_am3352, + }, {} }; MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table); -- cgit v1.2.3 From a563babeb5fbe721a046adf6f1cdc02e0a207c8d Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Sun, 11 May 2014 10:47:14 +0200 Subject: net: cdc_mbim: add driver documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit An initial attempt on describing some of the odd APIs provided by this driver. Cc: Greg Suarez Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- Documentation/networking/cdc_mbim.txt | 339 ++++++++++++++++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 Documentation/networking/cdc_mbim.txt (limited to 'Documentation') diff --git a/Documentation/networking/cdc_mbim.txt b/Documentation/networking/cdc_mbim.txt new file mode 100644 index 000000000000..a15ea602aa52 --- /dev/null +++ b/Documentation/networking/cdc_mbim.txt @@ -0,0 +1,339 @@ + cdc_mbim - Driver for CDC MBIM Mobile Broadband modems + ======================================================== + +The cdc_mbim driver supports USB devices conforming to the "Universal +Serial Bus Communications Class Subclass Specification for Mobile +Broadband Interface Model" [1], which is a further development of +"Universal Serial Bus Communications Class Subclass Specifications for +Network Control Model Devices" [2] optimized for Mobile Broadband +devices, aka "3G/LTE modems". + + +Command Line Parameters +======================= + +The cdc_mbim driver has no parameters of its own. But the probing +behaviour for NCM 1.0 backwards compatible MBIM functions (an +"NCM/MBIM function" as defined in section 3.2 of [1]) is affected +by a cdc_ncm driver parameter: + +prefer_mbim +----------- +Type: Boolean +Valid Range: N/Y (0-1) +Default Value: Y (MBIM is preferred) + +This parameter sets the system policy for NCM/MBIM functions. Such +functions will be handled by either the cdc_ncm driver or the cdc_mbim +driver depending on the prefer_mbim setting. Setting prefer_mbim=N +makes the cdc_mbim driver ignore these functions and lets the cdc_ncm +driver handle them instead. + +The parameter is writable, and can be changed at any time. A manual +unbind/bind is required to make the change effective for NCM/MBIM +functions bound to the "wrong" driver + + +Basic usage +=========== + +MBIM functions are inactive when unmanaged. The cdc_mbim driver only +provides an userspace interface to the MBIM control channel, and will +not participate in the management of the function. This implies that a +userspace MBIM management application always is required to enable a +MBIM function. + +Such userspace applications includes, but are not limited to: + - mbimcli (included with the libmbim [3] library), and + - ModemManager [4] + +Establishing a MBIM IP session reequires at least these actions by the +management application: + - open the control channel + - configure network connection settings + - connect to network + - configure IP interface + +Management application development +---------------------------------- +The driver <-> userspace interfaces are described below. The MBIM +control channel protocol is described in [1]. + + +MBIM control channel userspace ABI +================================== + +/dev/cdc-wdmX character device +------------------------------ +The driver creates a two-way pipe to the MBIM function control channel +using the cdc-wdm driver as a subdriver. The userspace end of the +control channel pipe is a /dev/cdc-wdmX character device. + +The cdc_mbim driver does not process or police messages on the control +channel. The channel is fully delegated to the userspace management +application. It is therefore up to this application to ensure that it +complies with all the control channel requirements in [1]. + +The cdc-wdmX device is created as a child of the MBIM control +interface USB device. The character device associated with a specific +MBIM function can be looked up using sysfs. For example: + + bjorn@nemi:~$ ls /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc + cdc-wdm0 + + bjorn@nemi:~$ grep . /sys/bus/usb/drivers/cdc_mbim/2-4:2.12/usbmisc/cdc-wdm0/dev + 180:0 + + +USB configuration descriptors +----------------------------- +The wMaxControlMessage field of the CDC MBIM functional descriptor +limits the maximum control message size. The managament application is +responsible for negotiating a control message size complying with the +requirements in section 9.3.1 of [1], taking this descriptor field +into consideration. + +The userspace application can access the CDC MBIM functional +descriptor of a MBIM function using either of the two USB +configuration descriptor kernel interfaces described in [6] or [7]. + +See also the ioctl documentation below. + + +Fragmentation +------------- +The userspace application is responsible for all control message +fragmentation and defragmentaion, as described in section 9.5 of [1]. + + +/dev/cdc-wdmX write() +--------------------- +The MBIM control messages from the management application *must not* +exceed the negotiated control message size. + + +/dev/cdc-wdmX read() +-------------------- +The management application *must* accept control messages of up the +negotiated control message size. + + +/dev/cdc-wdmX ioctl() +-------------------- +IOCTL_WDM_MAX_COMMAND: Get Maximum Command Size +This ioctl returns the wMaxControlMessage field of the CDC MBIM +functional descriptor for MBIM devices. This is intended as a +convenience, eliminating the need to parse the USB descriptors from +userspace. + + #include + #include + #include + #include + #include + int main() + { + __u16 max; + int fd = open("/dev/cdc-wdm0", O_RDWR); + if (!ioctl(fd, IOCTL_WDM_MAX_COMMAND, &max)) + printf("wMaxControlMessage is %d\n", max); + } + + +Custom device services +---------------------- +The MBIM specification allows vendors to freely define additional +services. This is fully supported by the cdc_mbim driver. + +Support for new MBIM services, including vendor specified services, is +implemented entirely in userspace, like the rest of the MBIM control +protocol + +New services should be registered in the MBIM Registry [5]. + + + +MBIM data channel userspace ABI +=============================== + +wwanY network device +-------------------- +The cdc_mbim driver represents the MBIM data channel as a single +network device of the "wwan" type. This network device is initially +mapped to MBIM IP session 0. + + +Multiplexed IP sessions (IPS) +----------------------------- +MBIM allows multiplexing up to 256 IP sessions over a single USB data +channel. The cdc_mbim driver models such IP sessions as 802.1q VLAN +subdevices of the master wwanY device, mapping MBIM IP session Z to +VLAN ID Z for all values of Z greater than 0. + +The device maximum Z is given in the MBIM_DEVICE_CAPS_INFO structure +described in section 10.5.1 of [1]. + +The userspace management application is responsible for adding new +VLAN links prior to establishing MBIM IP sessions where the SessionId +is greater than 0. These links can be added by using the normal VLAN +kernel interfaces, either ioctl or netlink. + +For example, adding a link for a MBIM IP session with SessionId 3: + + ip link add link wwan0 name wwan0.3 type vlan id 3 + +The driver will automatically map the "wwan0.3" network device to MBIM +IP session 3. + + +Device Service Streams (DSS) +---------------------------- +MBIM also allows up to 256 non-IP data streams to be multiplexed over +the same shared USB data channel. The cdc_mbim driver models these +sessions as another set of 802.1q VLAN subdevices of the master wwanY +device, mapping MBIM DSS session A to VLAN ID (256 + A) for all values +of A. + +The device maximum A is given in the MBIM_DEVICE_SERVICES_INFO +structure described in section 10.5.29 of [1]. + +The DSS VLAN subdevices are used as a practical interface between the +shared MBIM data channel and a MBIM DSS aware userspace application. +It is not intended to be presented as-is to an end user. The +assumption is that an userspace application initiating a DSS session +also takes care of the necessary framing of the DSS data, presenting +the stream to the end user in an appropriate way for the stream type. + +The network device ABI requires a dummy ethernet header for every DSS +data frame being transported. The contents of this header is +arbitrary, with the following exceptions: + - TX frames using an IP protocol (0x0800 or 0x86dd) will be dropped + - RX frames will have the protocol field set to ETH_P_802_3 (but will + not be properly formatted 802.3 frames) + - RX frames will have the destination address set to the hardware + address of the master device + +The DSS supporting userspace management application is responsible for +adding the dummy ethernet header on TX and stripping it on RX. + +This is a simple example using tools commonly available, exporting +DssSessionId 5 as a pty character device pointed to by a /dev/nmea +symlink: + + ip link add link wwan0 name wwan0.dss5 type vlan id 261 + ip link set dev wwan0.dss5 up + socat INTERFACE:wwan0.dss5,type=2 PTY:,echo=0,link=/dev/nmea + +This is only an example, most suitable for testing out a DSS +service. Userspace applications supporting specific MBIM DSS services +are expected to use the tools and programming interfaces required by +that service. + +Note that adding VLAN links for DSS sessions is entirely optional. A +management application may instead choose to bind a packet socket +directly to the master network device, using the received VLAN tags to +map frames to the correct DSS session and adding 18 byte VLAN ethernet +headers with the appropriate tag on TX. In this case using a socket +filter is recommended, matching only the DSS VLAN subset. This avoid +unnecessary copying of unrelated IP session data to userspace. For +example: + + static struct sock_filter dssfilter[] = { + /* use special negative offsets to get VLAN tag */ + BPF_STMT(BPF_LD|BPF_B|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG_PRESENT), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 1, 0, 6), /* true */ + + /* verify DSS VLAN range */ + BPF_STMT(BPF_LD|BPF_H|BPF_ABS, SKF_AD_OFF + SKF_AD_VLAN_TAG), + BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 256, 0, 4), /* 256 is first DSS VLAN */ + BPF_JUMP(BPF_JMP|BPF_JGE|BPF_K, 512, 3, 0), /* 511 is last DSS VLAN */ + + /* verify ethertype */ + BPF_STMT(BPF_LD|BPF_H|BPF_ABS, 2 * ETH_ALEN), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, ETH_P_802_3, 0, 1), + + BPF_STMT(BPF_RET|BPF_K, (u_int)-1), /* accept */ + BPF_STMT(BPF_RET|BPF_K, 0), /* ignore */ + }; + + + +Tagged IP session 0 VLAN +------------------------ +As described above, MBIM IP session 0 is treated as special by the +driver. It is initially mapped to untagged frames on the wwanY +network device. + +This mapping implies a few restrictions on multiplexed IPS and DSS +sessions, which may not always be practical: + - no IPS or DSS session can use a frame size greater than the MTU on + IP session 0 + - no IPS or DSS session can be in the up state unless the network + device representing IP session 0 also is up + +These problems can be avoided by optionally making the driver map IP +session 0 to a VLAN subdevice, similar to all other IP sessions. This +behaviour is triggered by adding a VLAN link for the magic VLAN ID +4094. The driver will then immediately start mapping MBIM IP session +0 to this VLAN, and will drop untagged frames on the master wwanY +device. + +Tip: It might be less confusing to the end user to name this VLAN +subdevice after the MBIM SessionID instead of the VLAN ID. For +example: + + ip link add link wwan0 name wwan0.0 type vlan id 4094 + + +VLAN mapping +------------ + +Summarizing the cdc_mbim driver mapping described above, we have this +relationship between VLAN tags on the wwanY network device and MBIM +sessions on the shared USB data channel: + + VLAN ID MBIM type MBIM SessionID Notes + --------------------------------------------------------- + untagged IPS 0 a) + 1 - 255 IPS 1 - 255 + 256 - 511 DSS 0 - 255 + 512 - 4093 b) + 4094 IPS 0 c) + + a) if no VLAN ID 4094 link exists, else dropped + b) unsupported VLAN range, unconditionally dropped + c) if a VLAN ID 4094 link exists, else dropped + + + + +References +========== + +[1] USB Implementers Forum, Inc. - "Universal Serial Bus + Communications Class Subclass Specification for Mobile Broadband + Interface Model", Revision 1.0 (Errata 1), May 1, 2013 + - http://www.usb.org/developers/docs/devclass_docs/ + +[2] USB Implementers Forum, Inc. - "Universal Serial Bus + Communications Class Subclass Specifications for Network Control + Model Devices", Revision 1.0 (Errata 1), November 24, 2010 + - http://www.usb.org/developers/docs/devclass_docs/ + +[3] libmbim - "a glib-based library for talking to WWAN modems and + devices which speak the Mobile Interface Broadband Model (MBIM) + protocol" + - http://www.freedesktop.org/wiki/Software/libmbim/ + +[4] ModemManager - "a DBus-activated daemon which controls mobile + broadband (2G/3G/4G) devices and connections" + - http://www.freedesktop.org/wiki/Software/ModemManager/ + +[5] "MBIM (Mobile Broadband Interface Model) Registry" + - http://compliance.usb.org/mbim/ + +[6] "/proc/bus/usb filesystem output" + - Documentation/usb/proc_usb_info.txt + +[7] "/sys/bus/usb/devices/.../descriptors" + - Documentation/ABI/stable/sysfs-bus-usb -- cgit v1.2.3 From 5888bcc5d24acf911c3d12719d72968c9b27a02f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 14 May 2014 10:33:45 +0930 Subject: Documentation: Update kernel-parameters.tx 1) __setup() is messy, prefer module_param and core_param. 2) Document -- 3) Document modprobe scraping /proc/cmdline. 4) Document handing of leftover parameters to init. 5) Document use of quotes to protect whitespace. Reported-by: Andrew Morton Signed-off-by: Rusty Russell --- Documentation/kernel-parameters.txt | 40 +++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 43842177b771..a42b9dd6b46b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1,27 +1,37 @@ Kernel Parameters ~~~~~~~~~~~~~~~~~ -The following is a consolidated list of the kernel parameters as implemented -(mostly) by the __setup() macro and sorted into English Dictionary order -(defined as ignoring all punctuation and sorting digits before letters in a -case insensitive manner), and with descriptions where known. - -Module parameters for loadable modules are specified only as the -parameter name with optional '=' and value as appropriate, such as: - - modprobe usbcore blinkenlights=1 - -Module parameters for modules that are built into the kernel image -are specified on the kernel command line with the module name plus -'.' plus parameter name, with '=' and value if appropriate, such as: - - usbcore.blinkenlights=1 +The following is a consolidated list of the kernel parameters as +implemented by the __setup(), core_param() and module_param() macros +and sorted into English Dictionary order (defined as ignoring all +punctuation and sorting digits before letters in a case insensitive +manner), and with descriptions where known. + +The kernel parses parameters from the kernel command line up to "--"; +if it doesn't recognize a parameter and it doesn't contain a '.', the +parameter gets passed to init: parameters with '=' go into init's +environment, others are passed as command line arguments to init. +Everything after "--" is passed as an argument to init. + +Module parameters can be specified in two ways: via the kernel command +line with a module name prefix, or via modprobe, e.g.: + + (kernel command line) usbcore.blinkenlights=1 + (modprobe command line) modprobe usbcore blinkenlights=1 + +Parameters for modules which are built into the kernel need to be +specified on the kernel command line. modprobe looks through the +kernel command line (/proc/cmdline) and collects module parameters +when it loads a module, so the kernel command line can be used for +loadable modules too. Hyphens (dashes) and underscores are equivalent in parameter names, so log_buf_len=1M print-fatal-signals=1 can also be entered as log-buf-len=1M print_fatal_signals=1 +Double-quotes can be used to protect spaces in values, e.g.: + param="spaces in here" This document may not be entirely up to date and comprehensive. The command "modinfo -p ${modulename}" shows a current list of all parameters of a loadable -- cgit v1.2.3 From 3be2a49e5c08d268f8af0dd4fe89a24ea8cdc339 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Fri, 16 May 2014 16:14:05 +0200 Subject: of: provide a binding for fixed link PHYs Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni Reviewed-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: David S. Miller --- .../devicetree/bindings/net/fixed-link.txt | 30 ++++++++++ drivers/of/of_mdio.c | 67 ++++++++++++++++++++++ include/linux/of_mdio.h | 15 +++++ 3 files changed, 112 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/fixed-link.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt new file mode 100644 index 000000000000..e956de1be935 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fixed-link.txt @@ -0,0 +1,30 @@ +Fixed link Device Tree binding +------------------------------ + +Some Ethernet MACs have a "fixed link", and are not connected to a +normal MDIO-managed PHY device. For those situations, a Device Tree +binding allows to describe a "fixed link". + +Such a fixed link situation is described by creating a 'fixed-link' +sub-node of the Ethernet MAC device node, with the following +properties: + +* 'speed' (integer, mandatory), to indicate the link speed. Accepted + values are 10, 100 and 1000 +* 'full-duplex' (boolean, optional), to indicate that full duplex is + used. When absent, half duplex is assumed. +* 'pause' (boolean, optional), to indicate that pause should be + enabled. +* 'asym-pause' (boolean, optional), to indicate that asym_pause should + be enabled. + +Example: + +ethernet@0 { + ... + fixed-link { + speed = <1000>; + full-duplex; + }; + ... +}; diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 9a95831bd065..1def0bb5cb37 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -301,3 +302,69 @@ struct phy_device *of_phy_attach(struct net_device *dev, return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy; } EXPORT_SYMBOL(of_phy_attach); + +#if defined(CONFIG_FIXED_PHY) +/* + * of_phy_is_fixed_link() and of_phy_register_fixed_link() must + * support two DT bindings: + * - the old DT binding, where 'fixed-link' was a property with 5 + * cells encoding various informations about the fixed PHY + * - the new DT binding, where 'fixed-link' is a sub-node of the + * Ethernet device. + */ +bool of_phy_is_fixed_link(struct device_node *np) +{ + struct device_node *dn; + int len; + + /* New binding */ + dn = of_get_child_by_name(np, "fixed-link"); + if (dn) { + of_node_put(dn); + return true; + } + + /* Old binding */ + if (of_get_property(np, "fixed-link", &len) && + len == (5 * sizeof(__be32))) + return true; + + return false; +} +EXPORT_SYMBOL(of_phy_is_fixed_link); + +int of_phy_register_fixed_link(struct device_node *np) +{ + struct fixed_phy_status status = {}; + struct device_node *fixed_link_node; + const __be32 *fixed_link_prop; + int len; + + /* New binding */ + fixed_link_node = of_get_child_by_name(np, "fixed-link"); + if (fixed_link_node) { + status.link = 1; + status.duplex = of_property_read_bool(np, "full-duplex"); + if (of_property_read_u32(fixed_link_node, "speed", &status.speed)) + return -EINVAL; + status.pause = of_property_read_bool(np, "pause"); + status.asym_pause = of_property_read_bool(np, "asym-pause"); + of_node_put(fixed_link_node); + return fixed_phy_register(PHY_POLL, &status, np); + } + + /* Old binding */ + fixed_link_prop = of_get_property(np, "fixed-link", &len); + if (fixed_link_prop && len == (5 * sizeof(__be32))) { + status.link = 1; + status.duplex = be32_to_cpu(fixed_link_prop[1]); + status.speed = be32_to_cpu(fixed_link_prop[2]); + status.pause = be32_to_cpu(fixed_link_prop[3]); + status.asym_pause = be32_to_cpu(fixed_link_prop[4]); + return fixed_phy_register(PHY_POLL, &status, np); + } + + return -ENODEV; +} +EXPORT_SYMBOL(of_phy_register_fixed_link); +#endif diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index 881a7c3571f4..0aa367e316cb 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -72,4 +72,19 @@ static inline struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np) } #endif /* CONFIG_OF */ +#if defined(CONFIG_OF) && defined(CONFIG_FIXED_PHY) +extern int of_phy_register_fixed_link(struct device_node *np); +extern bool of_phy_is_fixed_link(struct device_node *np); +#else +static inline int of_phy_register_fixed_link(struct device_node *np) +{ + return -ENOSYS; +} +static inline bool of_phy_is_fixed_link(struct device_node *np) +{ + return false; +} +#endif + + #endif /* __LINUX_OF_MDIO_H */ -- cgit v1.2.3 From 277bd320e7dd8b77de6d3b6b9757b08fcca0108b Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 2 Apr 2014 20:25:27 +0200 Subject: can: add documentation for CAN filter usage optimisation To benefit from special filters for single SFF or single EFF CAN identifier subscriptions the CAN_EFF_FLAG bit and the CAN_RTR_FLAG bit has to be set together with the CAN_(SFF|EFF)_MASK in can_filter.mask. Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- Documentation/networking/can.txt | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 2fa44cbe81b7..cdd381c5311d 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -469,6 +469,41 @@ solution for a couple of reasons: having this 'send only' use-case we may remove the receive list in the Kernel to save a little (really a very little!) CPU usage. + 4.1.1.1 CAN filter usage optimisation + + The CAN filters are processed in per-device filter lists at CAN frame + reception time. To reduce the number of checks that need to be performed + while walking through the filter lists the CAN core provides an optimized + filter handling when the filter subscription focusses on a single CAN ID. + + For the possible 2048 SFF CAN identifiers the identifier is used as an index + to access the corresponding subscription list without any further checks. + For the 2^29 possible EFF CAN identifiers a 10 bit XOR folding is used as + hash function to retrieve the EFF table index. + + To benefit from the optimized filters for single CAN identifiers the + CAN_SFF_MASK or CAN_EFF_MASK have to be set into can_filter.mask together + with set CAN_EFF_FLAG and CAN_RTR_FLAG bits. A set CAN_EFF_FLAG bit in the + can_filter.mask makes clear that it matters whether a SFF or EFF CAN ID is + subscribed. E.g. in the example from above + + rfilter[0].can_id = 0x123; + rfilter[0].can_mask = CAN_SFF_MASK; + + both SFF frames with CAN ID 0x123 and EFF frames with 0xXXXXX123 can pass. + + To filter for only 0x123 (SFF) and 0x12345678 (EFF) CAN identifiers the + filter has to be defined in this way to benefit from the optimized filters: + + struct can_filter rfilter[2]; + + rfilter[0].can_id = 0x123; + rfilter[0].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_SFF_MASK); + rfilter[1].can_id = 0x12345678 | CAN_EFF_FLAG; + rfilter[1].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_EFF_MASK); + + setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, &rfilter, sizeof(rfilter)); + 4.1.2 RAW socket option CAN_RAW_ERR_FILTER As described in chapter 3.4 the CAN interface driver can generate so -- cgit v1.2.3 From f517a5f370de4171afe1487d67345d7eef1f1822 Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Tue, 13 May 2014 22:03:40 +0200 Subject: NFC: dts: st21nfca_i2c: Add DTS Documentation Describe the properties used by the st21nfca NFC controller driver. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/net/nfc/st21nfca.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/nfc/st21nfca.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt new file mode 100644 index 000000000000..4724fe669172 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -0,0 +1,33 @@ +* STMicroelectronics SAS. ST21NFCA NFC Controller + +Required properties: +- compatible: Should be "st,st21nfca-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): + +&i2c2 { + + status = "okay"; + + st21nfca: st21nfca@1 { + + compatible = "st,st21nfca_i2c"; + + reg = <0x01>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + }; +}; -- cgit v1.2.3 From 8edffbb933619d568ea98edd3b55ec7c30df9274 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 8 May 2014 15:39:19 +0200 Subject: drm/doc: Discourage usage of MODESET_CTL ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Leftover from the old days of ums and should be used any longer. Since commit 29935554b384b1b3a7377d6f0b03b21d18a61683 Author: Laurent Pinchart Date: Wed May 30 00:58:09 2012 +0200 drm: Disallow DRM_IOCTL_MODESET_CTL for KMS drivers it is a complete no-Op for kms drivers. v2: Fix up mangled sentence spotted by Michel. Cc: Laurent Pinchart Cc: Michel Dänzer Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ec81c20a17db..ad93c3e6b859 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2861,12 +2861,12 @@ int num_ioctls; DRM_IOCTL_MODESET_CTL - This should be called by application level drivers before and - after mode setting, since on many devices the vertical blank - counter is reset at that time. Internally, the DRM snapshots - the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command, so that the counter won't go backwards - (which is dealt with when _DRM_POST_MODESET is used). + This was only used for user-mode-settind drivers around + modesetting changes to allow the kernel to update the vblank + interrupt after mode setting, since on many devices the vertical + blank counter is reset to 0 at some point during modeset. Modern + drivers should not call this any more since with kernel mode + setting it is a no-op. -- cgit v1.2.3 From f5752b38970990fa1495839751aed64bd178b9e0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 8 May 2014 16:41:51 +0200 Subject: drm/irq: kerneldoc polish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit - Integrate into the drm DocBook - Disable kerneldoc for functions not exported to drivers. - Properly document the new drm_vblank_on|off and add cautious comments explaining when drm_vblank_pre|post_modesets shouldn't be used. - General polish and OCD. v2: Polish as suggested by Thierry. Cc: Thierry Reding Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 5 +- drivers/gpu/drm/drm_irq.c | 165 +++++++++++++++++++++++++++++------------ 2 files changed, 121 insertions(+), 49 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ad93c3e6b859..62573c17091d 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2519,6 +2519,10 @@ void (*disable_vblank) (struct drm_device *dev, int crtc); with a call to drm_vblank_cleanup in the driver unload operation handler. + + Vertical Blanking and Interrupt Handling Functions Reference +!Edrivers/gpu/drm/drm_irq.c + @@ -2871,7 +2875,6 @@ int num_ioctls; - diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index dd786d84daab..f3dafccca456 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1,6 +1,5 @@ -/** - * \file drm_irq.c - * IRQ support +/* + * drm_irq.c IRQ and vblank support * * \author Rickard E. (Rik) Faith * \author Gareth Hughes @@ -156,6 +155,12 @@ static void vblank_disable_fn(unsigned long arg) spin_unlock_irqrestore(&dev->vbl_lock, irqflags); } +/** + * drm_vblank_cleanup - cleanup vblank support + * @dev: DRM device + * + * This function cleans up any resources allocated in drm_vblank_init. + */ void drm_vblank_cleanup(struct drm_device *dev) { int crtc; @@ -175,6 +180,16 @@ void drm_vblank_cleanup(struct drm_device *dev) } EXPORT_SYMBOL(drm_vblank_cleanup); +/** + * drm_vblank_init - initialize vblank support + * @dev: drm_device + * @num_crtcs: number of crtcs supported by @dev + * + * This function initializes vblank support for @num_crtcs display pipelines. + * + * Returns: + * Zero on success or a negative error code on failure. + */ int drm_vblank_init(struct drm_device *dev, int num_crtcs) { int i, ret = -ENOMEM; @@ -238,13 +253,21 @@ static void drm_irq_vgaarb_nokms(void *cookie, bool state) } /** - * Install IRQ handler. - * - * \param dev DRM device. + * drm_irq_install - install IRQ handler + * @dev: DRM device + * @irq: IRQ number to install the handler for * * Initializes the IRQ related data. Installs the handler, calling the driver - * \c irq_preinstall() and \c irq_postinstall() functions - * before and after the installation. + * irq_preinstall() and irq_postinstall() functions before and after the + * installation. + * + * This is the simplified helper interface provided for drivers with no special + * needs. Drivers which need to install interrupt handlers for multiple + * interrupts must instead set drm_device->irq_enabled to signal the DRM core + * that vblank interrupts are available. + * + * Returns: + * Zero on success or a negative error code on failure. */ int drm_irq_install(struct drm_device *dev, int irq) { @@ -304,11 +327,20 @@ int drm_irq_install(struct drm_device *dev, int irq) EXPORT_SYMBOL(drm_irq_install); /** - * Uninstall the IRQ handler. + * drm_irq_uninstall - uninstall the IRQ handler + * @dev: DRM device + * + * Calls the driver's irq_uninstall() function and unregisters the IRQ handler. + * This should only be called by drivers which used drm_irq_install() to set up + * their interrupt handler. Other drivers must only reset + * drm_device->irq_enabled to false. * - * \param dev DRM device. + * Note that for kernel modesetting drivers it is a bug if this function fails. + * The sanity checks are only to catch buggy user modesetting drivers which call + * the same function through an ioctl. * - * Calls the driver's \c irq_uninstall() function, and stops the irq. + * Returns: + * Zero on success or a negative error code on failure. */ int drm_irq_uninstall(struct drm_device *dev) { @@ -353,7 +385,7 @@ int drm_irq_uninstall(struct drm_device *dev) } EXPORT_SYMBOL(drm_irq_uninstall); -/** +/* * IRQ control ioctl. * * \param inode device inode. @@ -406,15 +438,14 @@ int drm_control(struct drm_device *dev, void *data, } /** - * drm_calc_timestamping_constants - Calculate vblank timestamp constants - * - * @crtc drm_crtc whose timestamp constants should be updated. - * @mode display mode containing the scanout timings + * drm_calc_timestamping_constants - calculate vblank timestamp constants + * @crtc: drm_crtc whose timestamp constants should be updated. + * @mode: display mode containing the scanout timings * * Calculate and store various constants which are later * needed by vblank and swap-completion timestamping, e.g, * by drm_calc_vbltimestamp_from_scanoutpos(). They are - * derived from crtc's true scanout timing, so they take + * derived from CRTC's true scanout timing, so they take * things like panel scaling or other adjustments into account. */ void drm_calc_timestamping_constants(struct drm_crtc *crtc, @@ -459,11 +490,22 @@ void drm_calc_timestamping_constants(struct drm_crtc *crtc, EXPORT_SYMBOL(drm_calc_timestamping_constants); /** - * drm_calc_vbltimestamp_from_scanoutpos - helper routine for kms - * drivers. Implements calculation of exact vblank timestamps from - * given drm_display_mode timings and current video scanout position - * of a crtc. This can be called from within get_vblank_timestamp() - * implementation of a kms driver to implement the actual timestamping. + * drm_calc_vbltimestamp_from_scanoutpos - precise vblank timestamp helper + * @dev: DRM device + * @crtc: Which CRTC's vblank timestamp to retrieve + * @max_error: Desired maximum allowable error in timestamps (nanosecs) + * On return contains true maximum error of timestamp + * @vblank_time: Pointer to struct timeval which should receive the timestamp + * @flags: Flags to pass to driver: + * 0 = Default, + * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler + * @refcrtc: CRTC which defines scanout timing + * @mode: mode which defines the scanout timings + * + * Implements calculation of exact vblank timestamps from given drm_display_mode + * timings and current video scanout position of a CRTC. This can be called from + * within get_vblank_timestamp() implementation of a kms driver to implement the + * actual timestamping. * * Should return timestamps conforming to the OML_sync_control OpenML * extension specification. The timestamp corresponds to the end of @@ -478,21 +520,11 @@ EXPORT_SYMBOL(drm_calc_timestamping_constants); * returns as no operation if a doublescan or interlaced video mode is * active. Higher level code is expected to handle this. * - * @dev: DRM device. - * @crtc: Which crtc's vblank timestamp to retrieve. - * @max_error: Desired maximum allowable error in timestamps (nanosecs). - * On return contains true maximum error of timestamp. - * @vblank_time: Pointer to struct timeval which should receive the timestamp. - * @flags: Flags to pass to driver: - * 0 = Default. - * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler. - * @refcrtc: drm_crtc* of crtc which defines scanout timing. - * @mode: mode which defines the scanout timings - * - * Returns negative value on error, failure or if not supported in current + * Returns: + * Negative value on error, failure or if not supported in current * video mode: * - * -EINVAL - Invalid crtc. + * -EINVAL - Invalid CRTC. * -EAGAIN - Temporary unavailable, e.g., called before initial modeset. * -ENOTSUPP - Function not supported in current display mode. * -EIO - Failed, e.g., due to failed scanout position query. @@ -641,23 +673,23 @@ static struct timeval get_drm_timestamp(void) /** * drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent - * vblank interval. - * + * vblank interval * @dev: DRM device - * @crtc: which crtc's vblank timestamp to retrieve + * @crtc: which CRTC's vblank timestamp to retrieve * @tvblank: Pointer to target struct timeval which should receive the timestamp * @flags: Flags to pass to driver: - * 0 = Default. - * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl irq handler. + * 0 = Default, + * DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler * * Fetches the system timestamp corresponding to the time of the most recent - * vblank interval on specified crtc. May call into kms-driver to + * vblank interval on specified CRTC. May call into kms-driver to * compute the timestamp with a high-precision GPU specific method. * * Returns zero if timestamp originates from uncorrected do_gettimeofday() * call, i.e., it isn't very precisely locked to the true vblank. * - * Returns non-zero if timestamp is considered to be very precise. + * Returns: + * Non-zero if timestamp is considered to be very precise, zero otherwise. */ u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc, struct timeval *tvblank, unsigned flags) @@ -692,6 +724,9 @@ EXPORT_SYMBOL(drm_get_last_vbltimestamp); * Fetches the "cooked" vblank count value that represents the number of * vblank events since the system was booted, including lost events due to * modesetting activity. + * + * Returns: + * The software vblank counter. */ u32 drm_vblank_count(struct drm_device *dev, int crtc) { @@ -710,8 +745,7 @@ EXPORT_SYMBOL(drm_vblank_count); * Fetches the "cooked" vblank count value that represents the number of * vblank events since the system was booted, including lost events due to * modesetting activity. Returns corresponding system timestamp of the time - * of the vblank interval that corresponds to the current value vblank counter - * value. + * of the vblank interval that corresponds to the current vblank counter value. */ u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc, struct timeval *vblanktime) @@ -882,7 +916,7 @@ static int drm_vblank_enable(struct drm_device *dev, int crtc) * Acquire a reference count on vblank events to avoid having them disabled * while in use. * - * RETURNS + * Returns: * Zero on success, nonzero on failure. */ int drm_vblank_get(struct drm_device *dev, int crtc) @@ -930,6 +964,13 @@ EXPORT_SYMBOL(drm_vblank_put); * drm_vblank_off - disable vblank events on a CRTC * @dev: DRM device * @crtc: CRTC in question + * + * Drivers can use this function to shut down the vblank interrupt handling when + * disabling a crtc. This function ensures that the latest vblank frame count is + * stored so that drm_vblank_on() can restore it again. + * + * Drivers must use this function when the hardware vblank counter can get + * reset, e.g. when suspending. */ void drm_vblank_off(struct drm_device *dev, int crtc) { @@ -966,6 +1007,11 @@ EXPORT_SYMBOL(drm_vblank_off); * drm_vblank_on - enable vblank events on a CRTC * @dev: DRM device * @crtc: CRTC in question + * + * This functions restores the vblank interrupt state captured with + * drm_vblank_off() again. Note that calls to drm_vblank_on() and + * drm_vblank_off() can be unbalanced and so can also be unconditionaly called + * in driver load code to reflect the current hardware state of the crtc. */ void drm_vblank_on(struct drm_device *dev, int crtc) { @@ -986,6 +1032,21 @@ EXPORT_SYMBOL(drm_vblank_on); * * Account for vblank events across mode setting events, which will likely * reset the hardware frame counter. + * + * This is done by grabbing a temporary vblank reference to ensure that the + * vblank interrupt keeps running across the modeset sequence. With this the + * software-side vblank frame counting will ensure that there are no jumps or + * discontinuities. + * + * Unfortunately this approach is racy and also doesn't work when the vblank + * interrupt stops running, e.g. across system suspend resume. It is therefore + * highly recommended that drivers use the newer drm_vblank_off() and + * drm_vblank_on() instead. drm_vblank_pre_modeset() only works correctly when + * using "cooked" software vblank frame counters and not relying on any hardware + * counters. + * + * Drivers must call drm_vblank_post_modeset() when re-enabling the same crtc + * again. */ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) { @@ -1007,6 +1068,14 @@ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) } EXPORT_SYMBOL(drm_vblank_pre_modeset); +/** + * drm_vblank_post_modeset - undo drm_vblank_pre_modeset changes + * @dev: DRM device + * @crtc: CRTC in question + * + * This function again drops the temporary vblank reference acquired in + * drm_vblank_pre_modeset. + */ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) { unsigned long irqflags; @@ -1028,7 +1097,7 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) } EXPORT_SYMBOL(drm_vblank_post_modeset); -/** +/* * drm_modeset_ctl - handle vblank event counter changes across mode switch * @DRM_IOCTL_ARGS: standard ioctl arguments * @@ -1141,7 +1210,7 @@ err_put: return ret; } -/** +/* * Wait for VBLANK. * * \param inode device inode. @@ -1152,7 +1221,7 @@ err_put: * * This function enables the vblank interrupt on the pipe requested, then * sleeps waiting for the requested sequence number to occur, and drops - * the vblank interrupt refcount afterwards. (vblank irq disable follows that + * the vblank interrupt refcount afterwards. (vblank IRQ disable follows that * after a timeout with no further vblank waits scheduled). */ int drm_wait_vblank(struct drm_device *dev, void *data, -- cgit v1.2.3 From 0e76718923ca71548636bf02adc48e6104e4fb05 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 25 Apr 2014 20:14:31 +0300 Subject: drm/i915: Add a brief description of the VLV display PHY internals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Document the internal structure of the VLV display PHY a bit to help people understand how the different register blocks relate to each other. v2: Add a bit more text Make it a DOC: comment, but leave the ascii art out since it would get mangled Signed-off-by: Ville Syrjälä Reviewed-by: Chon Ming Lee Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 4 ++ drivers/gpu/drm/i915/i915_reg.h | 85 +++++++++++++++++++++++++++++++++++++++-- 2 files changed, 85 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 62573c17091d..b4f12d455166 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2937,6 +2937,10 @@ int num_ioctls; probing, so those sections fully apply. + + DPIO +!Pdrivers/gpu/drm/i915/i915_reg.h DPIO + diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index bab5d17f67d1..9b3681ee4a69 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -575,12 +575,89 @@ enum punit_power_well { #define DSI_PLL_M1_DIV_MASK (0x1ff << 0) #define CCK_DISPLAY_CLOCK_CONTROL 0x6b -/* - * DPIO - a special bus for various display related registers to hide behind +/** + * DOC: DPIO + * + * VLV and CHV have slightly peculiar display PHYs for driving DP/HDMI + * ports. DPIO is the name given to such a display PHY. These PHYs + * don't follow the standard programming model using direct MMIO + * registers, and instead their registers must be accessed trough IOSF + * sideband. VLV has one such PHY for driving ports B and C, and CHV + * adds another PHY for driving port D. Each PHY responds to specific + * IOSF-SB port. + * + * Each display PHY is made up of one or two channels. Each channel + * houses a common lane part which contains the PLL and other common + * logic. CH0 common lane also contains the IOSF-SB logic for the + * Common Register Interface (CRI) ie. the DPIO registers. CRI clock + * must be running when any DPIO registers are accessed. + * + * In addition to having their own registers, the PHYs are also + * controlled through some dedicated signals from the display + * controller. These include PLL reference clock enable, PLL enable, + * and CRI clock selection, for example. + * + * Eeach channel also has two splines (also called data lanes), and + * each spline is made up of one Physical Access Coding Sub-Layer + * (PCS) block and two TX lanes. So each channel has two PCS blocks + * and four TX lanes. The TX lanes are used as DP lanes or TMDS + * data/clock pairs depending on the output type. + * + * Additionally the PHY also contains an AUX lane with AUX blocks + * for each channel. This is used for DP AUX communication, but + * this fact isn't really relevant for the driver since AUX is + * controlled from the display controller side. No DPIO registers + * need to be accessed during AUX communication, + * + * Generally the common lane corresponds to the pipe and + * the spline (PCS/TX) correponds to the port. + * + * For dual channel PHY (VLV/CHV): + * + * pipe A == CMN/PLL/REF CH0 * - * DPIO is VLV only. + * pipe B == CMN/PLL/REF CH1 + * + * port B == PCS/TX CH0 + * + * port C == PCS/TX CH1 + * + * This is especially important when we cross the streams + * ie. drive port B with pipe B, or port C with pipe A. + * + * For single channel PHY (CHV): + * + * pipe C == CMN/PLL/REF CH0 + * + * port D == PCS/TX CH0 + * + * Note: digital port B is DDI0, digital port C is DDI1, + * digital port D is DDI2 + */ +/* + * Dual channel PHY (VLV/CHV) + * --------------------------------- + * | CH0 | CH1 | + * | CMN/PLL/REF | CMN/PLL/REF | + * |---------------|---------------| Display PHY + * | PCS01 | PCS23 | PCS01 | PCS23 | + * |-------|-------|-------|-------| + * |TX0|TX1|TX2|TX3|TX0|TX1|TX2|TX3| + * --------------------------------- + * | DDI0 | DDI1 | DP/HDMI ports + * --------------------------------- * - * Note: digital port B is DDI0, digital pot C is DDI1 + * Single channel PHY (CHV) + * ----------------- + * | CH0 | + * | CMN/PLL/REF | + * |---------------| Display PHY + * | PCS01 | PCS23 | + * |-------|-------| + * |TX0|TX1|TX2|TX3| + * ----------------- + * | DDI2 | DP/HDMI port + * ----------------- */ #define DPIO_DEVFN 0 -- cgit v1.2.3 From 111a9c1467483f41a39282ec9f8146133c5524c2 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 25 Apr 2014 20:14:32 +0300 Subject: drm/i915: Provide DPIO diagrams as docboox tables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ascii art version of the DPIO diagram gets mangled by docbook, so we can't use it there. Insted provide another version built using . Signed-off-by: Ville Syrjälä Reviewed-by: Chon Ming Lee Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter --- Documentation/DocBook/drm.tmpl | 86 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index b4f12d455166..9574bf24daaa 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2940,6 +2940,92 @@ int num_ioctls; DPIO !Pdrivers/gpu/drm/i915/i915_reg.h DPIO +
+ Dual channel PHY (VLV/CHV) + + + + + + + + + + + + + + + + + + CH0 + CH1 + + + + + CMN/PLL/REF + CMN/PLL/REF + + + PCS01 + PCS23 + PCS01 + PCS23 + + + TX0 + TX1 + TX2 + TX3 + TX0 + TX1 + TX2 + TX3 + + + DDI0 + DDI1 + + + +
+ + Single channel PHY (CHV) + + + + + + + + + + + CH0 + + + + + CMN/PLL/REF + + + PCS01 + PCS23 + + + TX0 + TX1 + TX2 + TX3 + + + DDI2 + + + +
-- cgit v1.2.3 From 91c1d980d6013dec4292309aa1700af36b400477 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 22 May 2014 09:47:43 -0700 Subject: Documentation: devicetree: add old and deprecated 'fixed-link' Update the fixed-link Device Tree binding documentation to contain information about the old and deprecated 5-digit 'fixed-link' property. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/fixed-link.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/fixed-link.txt b/Documentation/devicetree/bindings/net/fixed-link.txt index e956de1be935..82bf7e0f47b6 100644 --- a/Documentation/devicetree/bindings/net/fixed-link.txt +++ b/Documentation/devicetree/bindings/net/fixed-link.txt @@ -18,6 +18,18 @@ properties: * 'asym-pause' (boolean, optional), to indicate that asym_pause should be enabled. +Old, deprecated 'fixed-link' binding: + +* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the + form with the following accepted values: + - a: emulated PHY ID, choose any but but unique to the all specified + fixed-links, from 0 to 31 + - b: duplex configuration: 0 for half duplex, 1 for full duplex + - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000 + - d: pause configuration: 0 for no pause, 1 for pause + - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for + asymmetric pause + Example: ethernet@0 { -- cgit v1.2.3 From ae21888f9ef34fc2584b6caceb93f0b496dd21d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 22 May 2014 09:47:44 -0700 Subject: Documentation: devicetree: net: refer to fixed-link.txt Update the Freescale TSEC PHY, Broadcom GENET & SYSTEMPORT Device Tree binding documentation to refer to the fixed-link Device Tree binding in fixed-link.txt. Reviewed-by: Thomas Petazzoni Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt | 2 +- Documentation/devicetree/bindings/net/broadcom-systemport.txt | 2 +- Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 5 +---- 3 files changed, 3 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt index f2febb94550e..451fef26b4df 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt @@ -24,7 +24,7 @@ Optional properties: - fixed-link: When the GENET interface is connected to a MoCA hardware block or when operating in a RGMII to RGMII type of connection, or when the MDIO bus is voluntarily disabled, this property should be used to describe the "fixed link". - See Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for information on + See Documentation/devicetree/bindings/net/fixed-link.txt for information on the property specifics Required child nodes: diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt index 1b7600e022dd..c183ea90d9bc 100644 --- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt +++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt @@ -8,7 +8,7 @@ Required properties: - local-mac-address: Ethernet MAC address (48 bits) of this adapter - phy-mode: Should be a string describing the PHY interface to the Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt -- fixed-link: see Documentation/devicetree/bindings/net/fsl-tsec-phy.txt for +- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for the property specific details Optional properties: diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 737cdef4f903..be6ea8960f20 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -42,10 +42,7 @@ Properties: interrupt. For TSEC and eTSEC devices, the first interrupt is transmit, the second is receive, and the third is error. - phy-handle : See ethernet.txt file in the same directory. - - fixed-link : where a is emulated phy id - choose any, - but unique to the all specified fixed-links, b is duplex - 0 half, - 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no - pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. + - fixed-link : See fixed-link.txt in the same directory. - phy-connection-type : See ethernet.txt file in the same directory. This property is only really needed if the connection is of type "rgmii-id", as all other connection types are detected by hardware. -- cgit v1.2.3 From 04caa489301c5e01ac4e5d1c13abcecb2041300b Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 23 May 2014 18:43:59 +0200 Subject: net: filter: doc: add section for BPF test suite Mention the recently added test suite in the documentation file. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 748fd385535d..dc7dcc8c8184 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -833,6 +833,20 @@ loops and other CFG validation; second step starts from the first insn and descends all possible paths. It simulates execution of every insn and observes the state change of registers and stack. +Testing +------- + +Next to the BPF toolchain, the kernel also ships a test module that contains +various test cases for classic and internal BPF that can be executed against +the BPF interpreter and JIT compiler. It can be found in lib/test_bpf.c and +enabled via Kconfig: + + CONFIG_TEST_BPF=m + +After the module has been built and installed, the test suite can be executed +via insmod or modprobe against 'test_bpf' module. Results of the test cases +including timings in nsec can be found in the kernel log (dmesg). + Misc ---- -- cgit v1.2.3 From 481300ccf3ef5a79bb7ba59f77c96035134606d9 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 23 May 2014 12:57:17 -0700 Subject: devicetree: bindings: Properly document micrel ks8851 SPI chips The ks8851 SPI ethernet wasn't documented, but we documented the optional regulator supply for it under the mll based ethernet chip. Furthermore, that compatible string needed another 'l'. Fix all of this and document the optional vdd-io and reset-gpios properties. Cc: Nishanth Menon Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/micrel-ks8851.txt | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/micrel-ks8851.txt b/Documentation/devicetree/bindings/net/micrel-ks8851.txt index d54d0cc79487..bbdf9a7359a2 100644 --- a/Documentation/devicetree/bindings/net/micrel-ks8851.txt +++ b/Documentation/devicetree/bindings/net/micrel-ks8851.txt @@ -1,9 +1,18 @@ -Micrel KS8851 Ethernet mac +Micrel KS8851 Ethernet mac (MLL) Required properties: -- compatible = "micrel,ks8851-ml" of parallel interface +- compatible = "micrel,ks8851-mll" of parallel interface - reg : 2 physical address and size of registers for data and command - interrupts : interrupt connection +Micrel KS8851 Ethernet mac (SPI) + +Required properties: +- compatible = "micrel,ks8851" or the deprecated "ks8851" +- reg : chip select number +- interrupts : interrupt connection + Optional properties: -- vdd-supply: supply for Ethernet mac +- vdd-supply: analog 3.3V supply for Ethernet mac +- vdd-io-supply: digital 1.8V IO supply for Ethernet mac +- reset-gpios: reset_n input pin -- cgit v1.2.3 From 4ea7ceea5189f018800b9ed3b354bb4e2c39cd1a Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Tue, 20 May 2014 21:45:04 +0200 Subject: NFC: dts: st21nfca_i2c: Correct minor typo in documentation Replaced st,st21nfca-i2c by st,st21nfca_i2c to be concistent with below configuration and driver in drivers/nfc/st21nfca/ Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- Documentation/devicetree/bindings/net/nfc/st21nfca.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt index 4724fe669172..e4faa2e8dfeb 100644 --- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt +++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt @@ -1,7 +1,7 @@ * STMicroelectronics SAS. ST21NFCA NFC Controller Required properties: -- compatible: Should be "st,st21nfca-i2c". +- compatible: Should be "st,st21nfca_i2c". - clock-frequency: I²C work frequency. - reg: address on the bus - interrupt-parent: phandle for the interrupt gpio controller -- cgit v1.2.3 From 9a6594fc5241ad96cff727a134f336b1f1eaa0f7 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 15 May 2014 13:54:06 -0700 Subject: Documentation: fix typos in drm docbook Fix spelling typo in DocBook/drm.tmpl Signed-off-by: Masanari Iida Signed-off-by: Randy Dunlap Signed-off-by: Dave Airlie --- Documentation/DocBook/drm.tmpl | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ec81c20a17db..a21cdd5396ad 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -79,7 +79,7 @@ This first part of the DRM Developer's Guide documents core DRM code, - helper libraries for writting drivers and generic userspace interfaces + helper libraries for writing drivers and generic userspace interfaces exposed by DRM drivers. @@ -451,7 +451,7 @@ char *date; providing a solution to every graphics memory-related problems, GEM identified common code between drivers and created a support library to share it. GEM has simpler initialization and execution requirements than - TTM, but has no video RAM management capabitilies and is thus limited to + TTM, but has no video RAM management capabilities and is thus limited to UMA devices. @@ -881,7 +881,7 @@ int (*prime_fd_to_handle)(struct drm_device *dev, vice versa. Drivers must use the kernel dma-buf buffer sharing framework to manage the PRIME file descriptors. Similar to the mode setting API PRIME is agnostic to the underlying buffer object manager, as - long as handles are 32bit unsinged integers. + long as handles are 32bit unsigned integers. While non-GEM drivers must implement the operations themselves, GEM @@ -2348,7 +2348,7 @@ void intel_crt_init(struct drm_device *dev) first create properties and then create and associate individual instances of those properties to objects. A property can be instantiated multiple times and associated with different objects. Values are stored in property - instances, and all other property information are stored in the propery + instances, and all other property information are stored in the property and shared between all instances of the property. @@ -2689,10 +2689,10 @@ int num_ioctls; Legacy Support Code - The section very brievely covers some of the old legacy support code which + The section very briefly covers some of the old legacy support code which is only used by old DRM drivers which have done a so-called shadow-attach to the underlying device instead of registering as a real driver. This - also includes some of the old generic buffer mangement and command + also includes some of the old generic buffer management and command submission code. Do not use any of this in new and modern drivers. -- cgit v1.2.3 From 4cbe1bfa27dcc8e757c723f27e5a8e8b5fc32117 Mon Sep 17 00:00:00 2001 From: Daniel Thompson Date: Fri, 23 May 2014 16:01:43 +0100 Subject: drm: Add 800x600 (SVGA) screen resolution to the built-in EDIDs The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware. This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro. Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks. Signed-off-by: Daniel Thompson Cc: Randy Dunlap Cc: David Airlie Cc: Carsten Emde Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S (limited to 'Documentation') diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe31b32..6f3e4b75e49e 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe33a4d..bd9bef2a65af 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64cfd1f5..a45101c6160c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67cafcf2e..b0d7c69282b4 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d571d0a..3084355e81e7 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 000000000000..6644e26d5801 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/* + 800x600.S: EDID data set for standard 800x600 60 Hz monitor + + Copyright (C) 2011 Carsten Emde + Copyright (C) 2014 Linaro Limited + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1d9e8c..835db332289b 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae275fca..7ac03276d7a2 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11 +/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif + #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS /* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS /* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS /* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5442c5..6e09f615ebc9 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. "); -#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = { + "edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin", @@ -41,6 +42,24 @@ static const char *generic_edid_name[GENERIC_EDIDS] = { }; static const u8 generic_edid[GENERIC_EDIDS][128] = { + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, + 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, + 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2, + }, { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -- cgit v1.2.3 From 79499bca6c921d61f3ee5d20d71fb344ece1fdd2 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 23 May 2014 16:35:40 -0700 Subject: net: sysfs: add missing phys_port_id documentation Add documentation for the phys_port_id sysfs attribute of a network device. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/ABI/testing/sysfs-class-net | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index d922060e455d..416c5d59f52e 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -169,6 +169,14 @@ Description: "unknown", "notpresent", "down", "lowerlayerdown", "testing", "dormant", "up". +What: /sys/class/net//phys_port_id +Date: July 2013 +KernelVersion: 3.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface unique physical port identifier within + the NIC, as a string. + What: /sys/class/net//speed Date: October 2009 KernelVersion: 2.6.33 -- cgit v1.2.3 From 1a02ef76acfa0e172e7c3b08e4efb89db84ef0a5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 23 May 2014 16:35:41 -0700 Subject: net: sysfs: add documentation entries for /sys/class//queues Add sysfs documentation for the various attributes of a network interface exposed in /sys/class//queues/{rx,tx}-/ Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/ABI/testing/sysfs-class-net-queues | 79 ++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-net-queues (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues new file mode 100644 index 000000000000..5e9aeb91d355 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -0,0 +1,79 @@ +What: /sys/class//queues/rx-/rps_cpus +Date: March 2010 +KernelVersion: 2.6.35 +Contact: netdev@vger.kernel.org +Description: + Mask of the CPU(s) currently enabled to participate into the + Receive Packet Steering packet processing flow for this + network device queue. Possible values depend on the number + of available CPU(s) in the system. + +What: /sys/class//queues/rx-/rps_flow_cnt +Date: April 2010 +KernelVersion: 2.6.35 +Contact: netdev@vger.kernel.org +Description: + Number of Receive Packet Steering flows being currently + processed by this particular network device receive queue. + +What: /sys/class//queues/tx-/tx_timeout +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of transmit timeout events seen by this + network interface transmit queue. + +What: /sys/class//queues/tx-/xps_cpus +Date: November 2010 +KernelVersion: 2.6.38 +Contact: netdev@vger.kernel.org +Description: + Mask of the CPU(s) currently enabled to participate into the + Transmit Packet Steering packet processing flow for this + network device transmit queue. Possible vaules depend on the + number of available CPU(s) in the system. + +What: /sys/class//queues/tx-/byte_queue_limits/hold_time +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the hold time in milliseconds to measure the slack + of this particular network device transmit queue. + Default value is 1000. + +What: /sys/class//queues/tx-/byte_queue_limits/inflight +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes (objects) in flight on this + network device transmit queue. + +What: /sys/class//queues/tx-/byte_queue_limits/limit +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the current limit of bytes allowed to be queued + on this network device transmit queue. This value is clamped + to be within the bounds defined by limit_max and limit_min. + +What: /sys/class//queues/tx-/byte_queue_limits/limit_max +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the absolute maximum limit of bytes allowed to be + queued on this network device transmit queue. See + include/linux/dynamic_queue_limits.h for the default value. + +What: /sys/class//queues/tx-/byte_queue_limits/limit_min +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the absolute minimum limit of bytes allowed to be + queued on this network device transmit queue. Default value is + 0. -- cgit v1.2.3 From 6044f9700645264c52f69033a2b4457b856202f7 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 23 May 2014 16:35:42 -0700 Subject: net: sysfs: document /sys/class/net/statistics/* Document the network device statistics counter that are exposed as sysfs attributes. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- .../ABI/testing/sysfs-class-net-statistics | 201 +++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-net-statistics (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics new file mode 100644 index 000000000000..397118de7b5e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-statistics @@ -0,0 +1,201 @@ +What: /sys/class//statistics/collisions +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of collisions seen by this network device. + This value might not be relevant with all MAC layers. + +What: /sys/class//statistics/multicast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of multicast packets received by this + network device. + +What: /sys/class//statistics/rx_bytes +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes received by this network device. + See the network driver for the exact meaning of when this + value is incremented. + +What: /sys/class//statistics/rx_compressed +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of compressed packets received by this + network device. This value might only be relevant for interfaces + that support packet compression (e.g: PPP). + +What: /sys/class//statistics/rx_crc_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets received with a CRC (FCS) error + by this network device. Note that the specific meaning might + depend on the MAC layer used by the interface. + +What: /sys/class//statistics/rx_dropped +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets received by the network device + but dropped, that are not forwarded to the upper layers for + packet processing. See the network driver for the exact + meaning of this value. + +What: /sys/class//statistics/rx_fifo_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of receive FIFO errors seen by this + network device. See the network driver for the exact + meaning of this value. + +What: /sys/class//statistics/rx_frame_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received frames with error, such as + alignment errors. Note that the specific meaning depends on + on the MAC layer protocol used. See the network driver for + the exact meaning of this value. + +What: /sys/class//statistics/rx_length_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received error packet with a length + error, oversized or undersized. See the network driver for the + exact meaning of this value. + +What: /sys/class//statistics/rx_missed_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received packets that have been missed + due to lack of capacity in the receive side. See the network + driver for the exact meaning of this value. + +What: /sys/class//statistics/rx_over_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received packets that are oversized + compared to what the network device is configured to accept + (e.g: larger than MTU). See the network driver for the exact + meaning of this value. + +What: /sys/class//statistics/rx_packets +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the total number of good packets received by this + network device. + +What: /sys/class//statistics/tx_aborted_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets that have been aborted + during transmission by a network device (e.g: because of + a medium collision). See the network driver for the exact + meaning of this value. + +What: /sys/class//statistics/tx_bytes +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes transmitted by a network + device. See the network driver for the exact meaning of this + value, in particular whether this accounts for all successfully + transmitted packets or all packets that have been queued for + transmission. + +What: /sys/class//statistics/tx_carrier_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets that could not be transmitted + because of carrier errors (e.g: physical link down). See the + network driver for the exact meaning of this value. + +What: /sys/class//statistics/tx_compressed +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of transmitted compressed packets. Note + this might only be relevant for devices that support + compression (e.g: PPP). + +What: /sys/class//statistics/tx_dropped +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets dropped during transmission. + See the driver for the exact reasons as to why the packets were + dropped. + +What: /sys/class//statistics/tx_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets in error during transmission by + a network device. See the driver for the exact reasons as to + why the packets were dropped. + +What: /sys/class//statistics/tx_fifo_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets having caused a transmit + FIFO error. See the driver for the exact reasons as to why the + packets were dropped. + +What: /sys/class//statistics/tx_heartbeat_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets transmitted that have been + reported as heartbeat errors. See the driver for the exact + reasons as to why the packets were dropped. + +What: /sys/class//statistics/tx_packets +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets transmitted by a network + device. See the driver for whether this reports the number of all + attempted or successful transmissions. + +What: /sys/class//statistics/tx_window_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets not successfully transmitted + due to a window collision. The specific meaning depends on the + MAC layer used. On Ethernet this is usually used to report + late collisions errors. -- cgit v1.2.3 From e649c648469f947b4fa2ad79dd37510cdbafdce7 Mon Sep 17 00:00:00 2001 From: Kedareswara rao Appana Date: Wed, 21 May 2014 17:11:29 +0530 Subject: can: Add xilinx CAN device tree bindings documentation Add xilinx CAN bindings documentation. Signed-off-by: Kedareswara rao Appana Acked-by: Rob Herring Signed-off-by: Marc Kleine-Budde --- .../devicetree/bindings/net/can/xilinx_can.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/xilinx_can.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt new file mode 100644 index 000000000000..fe38847d8e26 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt @@ -0,0 +1,44 @@ +Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings +--------------------------------------------------------- + +Required properties: +- compatible : Should be "xlnx,zynq-can-1.0" for Zynq CAN + controllers and "xlnx,axi-can-1.00.a" for Axi CAN + controllers. +- reg : Physical base address and size of the Axi CAN/Zynq + CANPS registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller +- clock-names : List of input clock names - "can_clk", "pclk" + (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN) + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). +- tx-fifo-depth : Can Tx fifo depth. +- rx-fifo-depth : Can Rx fifo depth. + + +Example: + +For Zynq CANPS Dts file: + zynq_can_0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; +For Axi CAN Dts file: + axi_can_0: axi-can@40000000 { + compatible = "xlnx,axi-can-1.00.a"; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk","s_axi_aclk" ; + reg = <0x40000000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <0 59 1>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; -- cgit v1.2.3 From 6c6a3996f2c598b860f96731a158641837b50932 Mon Sep 17 00:00:00 2001 From: Sagar Kamble Date: Tue, 11 Mar 2014 19:55:29 +0530 Subject: Documentation: drm: describing drm properties exposed by various drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Started documenting drm properties for drm drivers. This patch provides information about properties in drm, i915, psb and cdv/gma-500. Information about other properties can be added on top of these. v2: Added description of drm properties in armada, exynos, i2c/ch7006, noveau, omap, qxl, radeon, rcar-du v3: Removed "Property Object" column since it is implementation related. Property type column refined.[Ville's review comments] v4: Removed whitespace warnings and minor nits. [Randy's review comments] v5: Restructured output for ENUM properties v6: Review comments on formatting the table. [Laurent's review comments] v7: Minor restructuring. [Laurent's review comments] Cc: Rob Landley Cc: Dave Airlie Cc: Daniel Vetter Acked-by: Laurent Pinchart Cc: David Herrmann Cc: Alex Deucher Cc: "Ville Syrjälä" Cc: Sagar Kamble Cc: "Purushothaman, Vijay A" Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sagar Kamble Signed-off-by: Dave Airlie --- Documentation/DocBook/drm.tmpl | 849 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 849 insertions(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index a21cdd5396ad..c1c9cf2a7b48 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2442,6 +2442,855 @@ void intel_crt_init(struct drm_device *dev) pointer to the target object, a pointer to the previously created property and an initial instance value. + + Existing KMS Properties + + The following table gives description of drm properties exposed by various + modules/drivers. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Owner Module/DriversGroupProperty NameTypeProperty ValuesObject attachedDescription/Restrictions
DRMGeneric“EDID”BLOB | IMMUTABLE0ConnectorContains id of edid blob ptr object.
“DPMS”ENUM{ “On”, “Standby”, “Suspend”, “Off” }ConnectorContains DPMS operation mode value.
DVI-I“subconnector”ENUM{ “Unknown”, “DVI-D”, “DVI-A” }ConnectorTBD
“select subconnector”ENUM{ “Automatic”, “DVI-D”, “DVI-A” }ConnectorTBD
TV“subconnector”ENUM{ "Unknown", "Composite", "SVIDEO", "Component", "SCART" }ConnectorTBD
“select subconnector”ENUM{ "Automatic", "Composite", "SVIDEO", "Component", "SCART" }ConnectorTBD
“mode”ENUM{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.ConnectorTBD
“left margin”RANGEMin=0, Max=100ConnectorTBD
“right margin”RANGEMin=0, Max=100ConnectorTBD
“top margin”RANGEMin=0, Max=100ConnectorTBD
“bottom margin”RANGEMin=0, Max=100ConnectorTBD
“brightness”RANGEMin=0, Max=100ConnectorTBD
“contrast”RANGEMin=0, Max=100ConnectorTBD
“flicker reduction”RANGEMin=0, Max=100ConnectorTBD
“overscan”RANGEMin=0, Max=100ConnectorTBD
“saturation”RANGEMin=0, Max=100ConnectorTBD
“hue”RANGEMin=0, Max=100ConnectorTBD
Optional“scaling mode”ENUM{ "None", "Full", "Center", "Full aspect" }ConnectorTBD
“dirty”ENUM | IMMUTABLE{ "Off", "On", "Annotate" }ConnectorTBD
i915Generic"Broadcast RGB"ENUM{ "Automatic", "Full", "Limited 16:235" }ConnectorTBD
“audio”ENUM{ "force-dvi", "off", "auto", "on" }ConnectorTBD
Standard name as in DRMStandard type as in DRMStandard value as in DRMStandard Object as in DRMTBD
SDVO-TV“mode”ENUM{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.ConnectorTBD
"left_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"right_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"top_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"bottom_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
“hpos”RANGEMin=0, Max= SDVO dependentConnectorTBD
“vpos”RANGEMin=0, Max= SDVO dependentConnectorTBD
“contrast”RANGEMin=0, Max= SDVO dependentConnectorTBD
“saturation”RANGEMin=0, Max= SDVO dependentConnectorTBD
“hue”RANGEMin=0, Max= SDVO dependentConnectorTBD
“sharpness”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter_adaptive”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter_2d”RANGEMin=0, Max= SDVO dependentConnectorTBD
“tv_chroma_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“tv_luma_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“dot_crawl”RANGEMin=0, Max=1ConnectorTBD
SDVO-TV/LVDS“brightness”RANGEMin=0, Max= SDVO dependentConnectorTBD
CDV gma-500Generic"Broadcast RGB"ENUM{ “Full”, “Limited 16:235” }ConnectorTBD
"Broadcast RGB"ENUM{ “off”, “auto”, “on” }ConnectorTBD
Standard name as in DRMStandard type as in DRMStandard value as in DRMStandard Object as in DRMTBD
PoulsboGeneric“backlight”RANGEMin=0, Max=100ConnectorTBD
Standard name as in DRMStandard type as in DRMStandard value as in DRMStandard Object as in DRMTBD
SDVO-TV“mode”ENUM{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.ConnectorTBD
"left_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"right_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"top_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
"bottom_margin"RANGEMin=0, Max= SDVO dependentConnectorTBD
“hpos”RANGEMin=0, Max= SDVO dependentConnectorTBD
“vpos”RANGEMin=0, Max= SDVO dependentConnectorTBD
“contrast”RANGEMin=0, Max= SDVO dependentConnectorTBD
“saturation”RANGEMin=0, Max= SDVO dependentConnectorTBD
“hue”RANGEMin=0, Max= SDVO dependentConnectorTBD
“sharpness”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter_adaptive”RANGEMin=0, Max= SDVO dependentConnectorTBD
“flicker_filter_2d”RANGEMin=0, Max= SDVO dependentConnectorTBD
“tv_chroma_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“tv_luma_filter”RANGEMin=0, Max= SDVO dependentConnectorTBD
“dot_crawl”RANGEMin=0, Max=1ConnectorTBD
SDVO-TV/LVDS“brightness”RANGEMin=0, Max= SDVO dependentConnectorTBD
armadaCRTC"CSC_YUV"ENUM{ "Auto" , "CCIR601", "CCIR709" }CRTCTBD
"CSC_RGB"ENUM{ "Auto", "Computer system", "Studio" }CRTCTBD
Overlay"colorkey"RANGEMin=0, Max=0xffffffPlaneTBD
"colorkey_min"RANGEMin=0, Max=0xffffffPlaneTBD
"colorkey_max"RANGEMin=0, Max=0xffffffPlaneTBD
"colorkey_val"RANGEMin=0, Max=0xffffffPlaneTBD
"colorkey_alpha"RANGEMin=0, Max=0xffffffPlaneTBD
"colorkey_mode"ENUM{ "disabled", "Y component", "U component" + , "V component", "RGB", “R component", "G component", "B component" }PlaneTBD
"brightness"RANGEMin=0, Max=256 + 255PlaneTBD
"contrast"RANGEMin=0, Max=0x7fffPlaneTBD
"saturation"RANGEMin=0, Max=0x7fffPlaneTBD
exynosCRTC“mode”ENUM{ "normal", "blank" }CRTCTBD
Overlay“zpos”RANGEMin=0, Max=MAX_PLANE-1PlaneTBD
i2c/ch7006_drvGeneric“scale”RANGEMin=0, Max=2ConnectorTBD
TVStandard names as in DRMStandard types as in DRMStandard Values as in DRMStandard object as in DRMTBD
“mode”ENUM{ "PAL", "PAL-M","PAL-N"}, ”PAL-Nc" + , "PAL-60", "NTSC-M", "NTSC-J" }ConnectorTBD
noveauNV10 Overlay"colorkey"RANGEMin=0, Max=0x01ffffffPlaneTBD
“contrast”RANGEMin=0, Max=8192-1PlaneTBD
“brightness”RANGEMin=0, Max=1024PlaneTBD
“hue”RANGEMin=0, Max=359PlaneTBD
“saturation”RANGEMin=0, Max=8192-1PlaneTBD
“iturbt_709”RANGEMin=0, Max=1PlaneTBD
Nv04 Overlay“colorkey”RANGEMin=0, Max=0x01ffffffPlaneTBD
“brightness”RANGEMin=0, Max=1024PlaneTBD
Display“dithering mode”ENUM{ "auto", "off", "on" }ConnectorTBD
“dithering depth”ENUM{ "auto", "off", "on", "static 2x2", "dynamic 2x2", "temporal" }ConnectorTBD
“underscan”ENUM{ "auto", "6 bpc", "8 bpc" }ConnectorTBD
“underscan hborder”RANGEMin=0, Max=128ConnectorTBD
“underscan vborder”RANGEMin=0, Max=128ConnectorTBD
“vibrant hue”RANGEMin=0, Max=180ConnectorTBD
“color vibrance”RANGEMin=0, Max=200ConnectorTBD
GenericStandard name as in DRMStandard type as in DRMStandard value as in DRMStandard Object as in DRMTBD
omapGeneric“rotation”BITMASK{ 0, "rotate-0" }, + { 1, "rotate-90" }, + { 2, "rotate-180" }, + { 3, "rotate-270" }, + { 4, "reflect-x" }, + { 5, "reflect-y" }CRTC, PlaneTBD
“zorder”RANGEMin=0, Max=3CRTC, PlaneTBD
qxlGeneric“hotplug_mode_update"RANGEMin=0, Max=1ConnectorTBD
radeonDVI-I“coherent”RANGEMin=0, Max=1ConnectorTBD
DAC enable load detect“load detection”RANGEMin=0, Max=1ConnectorTBD
TV Standard"tv standard"ENUM{ "ntsc", "pal", "pal-m", "pal-60", "ntsc-j" + , "scart-pal", "pal-cn", "secam" }ConnectorTBD
legacy TMDS PLL detect"tmds_pll"ENUM{ "driver", "bios" }-TBD
Underscan"underscan"ENUM{ "off", "on", "auto" }ConnectorTBD
"underscan hborder"RANGEMin=0, Max=128ConnectorTBD
"underscan vborder"RANGEMin=0, Max=128ConnectorTBD
Audio“audio”ENUM{ "off", "on", "auto" }ConnectorTBD
FMT Dithering“dither”ENUM{ "off", "on" }ConnectorTBD
GenericStandard name as in DRMStandard type as in DRMStandard value as in DRMStandard Object as in DRMTBD
rcar-duGeneric"alpha"RANGEMin=0, Max=255PlaneTBD
"colorkey"RANGEMin=0, Max=0x01ffffffPlaneTBD
"zpos"RANGEMin=1, Max=7PlaneTBD
+ -- cgit v1.2.3 From e7cd1d1eb16fcdf53001b926187a82f1f3e1a7e6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 20 May 2014 11:17:54 -0700 Subject: mfd: twl4030-power: Add generic reset configuration The twl4030 PMIC needs to be configured properly for things like warm reset and deeper idle states so the PMIC manages the regulators properly based on the hardware triggers from the SoC. Earlier we have configured twl4030 using platform data, but we want to do it for device tree based booting also. In some cases configuring twl4030 is needed for things to work. For example, when rebooting an OMAP3530 at 125 MHz, it hangs. With this patch, TWL4030 will be reset when a warm reset occures, and OMAP3530 does not hang on reboot. Let's add device tree support and configure things for warm reset as the default when compatible = "ti,twl4030-power". More complicated configurations can be added to the driver based on other compatible flags. Note we now also make the pdata const like it should be. This allows use it for match->data with the device tree related functions. Based on earlier patch by Matthias Brugger and Lesly A M . Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/twl4030-power.txt | 7 +- drivers/mfd/twl4030-power.c | 109 ++++++++++++++++++--- include/linux/i2c/twl.h | 3 + 3 files changed, 105 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index 8e15ec35ac99..b90611650cd9 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -5,7 +5,12 @@ to control the power resources, including power scripts. For now, the binding only supports the complete shutdown of the system after poweroff. Required properties: -- compatible : must be "ti,twl4030-power" +- compatible : must be one of the following + "ti,twl4030-power" + "ti,twl4030-power-reset" + +The use of ti,twl4030-power-reset is recommended at least on +3530 that needs a special configuration for warm reset to work. Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 0b037dca46a8..cb5b0cb8f933 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -128,6 +129,40 @@ static u8 res_config_addrs[] = { [RES_MAIN_REF] = 0x94, }; +/* + * Usable values for .remap_sleep and .remap_off + * Based on table "5.3.3 Resource Operating modes" + */ +enum { + TWL_REMAP_OFF = 0, + TWL_REMAP_SLEEP = 8, + TWL_REMAP_ACTIVE = 9, +}; + +/* + * Macros to configure the PM register states for various resources. + * Note that we can make MSG_SINGULAR etc private to this driver once + * omap3 has been made DT only. + */ +#define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ +#define TWL_RESOURCE_SET(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } +#define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) +#define TWL_RESOURCE_OFF(res) TWL_RESOURCE_SET(res, RES_STATE_OFF) +#define TWL_RESOURCE_RESET(res) TWL_RESOURCE_SET(res, RES_STATE_WRST) +/* + * It seems that type1 and type2 is just the resource init order + * number for the type1 and type2 group. + */ +#define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ + RES_STATE_WRST), TWL_DFLT_DELAY } +#define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, \ + .remap_sleep = TWL_REMAP_SLEEP, } + static int twl4030_write_script_byte(u8 address, u8 byte) { int err; @@ -502,7 +537,8 @@ int twl4030_remove_script(u8 flags) return err; } -static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) +static int +twl4030_power_configure_scripts(const struct twl4030_power_data *pdata) { int err; int i; @@ -518,7 +554,8 @@ static int twl4030_power_configure_scripts(struct twl4030_power_data *pdata) return 0; } -static int twl4030_power_configure_resources(struct twl4030_power_data *pdata) +static int +twl4030_power_configure_resources(const struct twl4030_power_data *pdata) { struct twl4030_resconfig *resconfig = pdata->resource_config; int err; @@ -550,7 +587,7 @@ void twl4030_power_off(void) pr_err("TWL4030 Unable to power off\n"); } -static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, +static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata, struct device_node *node) { if (pdata && pdata->use_poweroff) @@ -562,10 +599,60 @@ static bool twl4030_power_use_poweroff(struct twl4030_power_data *pdata, return false; } +#ifdef CONFIG_OF + +/* Generic warm reset configuration for omap3 */ + +static struct twl4030_ins omap3_wrst_seq[] = { + TWL_RESOURCE_OFF(RES_NRES_PWRON), + TWL_RESOURCE_OFF(RES_RESET), + TWL_RESOURCE_RESET(RES_MAIN_REF), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2), + TWL_RESOURCE_RESET(RES_VUSB_3V1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1), + TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0), + TWL_RESOURCE_ON(RES_RESET), + TWL_RESOURCE_ON(RES_NRES_PWRON), +}; + +static struct twl4030_script omap3_wrst_script = { + .script = omap3_wrst_seq, + .size = ARRAY_SIZE(omap3_wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *omap3_reset_scripts[] = { + &omap3_wrst_script, +}; + +static struct twl4030_resconfig omap3_rconfig[] = { + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, -1, -1), + TWL_REMAP_SLEEP(RES_VDD1, DEV_GRP_P1, -1, -1), + TWL_REMAP_SLEEP(RES_VDD2, DEV_GRP_P1, -1, -1), + { 0, 0 }, +}; + +static struct twl4030_power_data omap3_reset = { + .scripts = omap3_reset_scripts, + .num = ARRAY_SIZE(omap3_reset_scripts), + .resource_config = omap3_rconfig, +}; + +static struct of_device_id twl4030_power_of_match[] = { + { + .compatible = "ti,twl4030-power-reset", + .data = &omap3_reset, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl4030_power_of_match); +#endif /* CONFIG_OF */ + static int twl4030_power_probe(struct platform_device *pdev) { - struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); + const struct twl4030_power_data *pdata = dev_get_platdata(&pdev->dev); struct device_node *node = pdev->dev.of_node; + const struct of_device_id *match; int err = 0; int err2 = 0; u8 val; @@ -586,8 +673,12 @@ static int twl4030_power_probe(struct platform_device *pdev) return err; } + match = of_match_device(of_match_ptr(twl4030_power_of_match), + &pdev->dev); + if (match && match->data) + pdata = match->data; + if (pdata) { - /* TODO: convert to device tree */ err = twl4030_power_configure_scripts(pdata); if (err) { pr_err("TWL4030 failed to load scripts\n"); @@ -637,14 +728,6 @@ static int twl4030_power_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id twl4030_power_of_match[] = { - {.compatible = "ti,twl4030-power", }, - { }, -}; -MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -#endif - static struct platform_driver twl4030_power_driver = { .driver = { .name = "twl4030_power", diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index ade1c06d4ceb..5fe031375ed4 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -486,7 +486,10 @@ static inline int twl6030_mmc_card_detect(struct device *dev, int slot) #define RES_GRP_ALL 0x7 /* All resource groups */ #define RES_TYPE2_R0 0x0 +#define RES_TYPE2_R1 0x1 +#define RES_TYPE2_R2 0x2 +#define RES_TYPE_R0 0x0 #define RES_TYPE_ALL 0x7 /* Resource states */ -- cgit v1.2.3 From 76714d2c090f836fe005008116075a7b5bfde852 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 20 May 2014 11:17:54 -0700 Subject: mfd: twl4030-power: Add recommended idle configuration These settings are based on the "Recommended Sleep Sequences for the Zoom Platform". The settings assume most of the regulators are under control of Linux, and twl4030 only cuts off VDD1 and VDD2 during off-idle as Linux cannot do it. For any board specific changes to these, let's patch them in as changes to the generic data in the follow-up patches. This keeps the board specific changes small. Note that this does not consider the twl5030 errata 27 and 28. That can be added later on after it has been tested. For more information about errata 27 and 28. Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- .../devicetree/bindings/mfd/twl4030-power.txt | 4 + drivers/mfd/twl4030-power.c | 106 +++++++++++++++++++++ 2 files changed, 110 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index b90611650cd9..bbd66039202a 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -8,10 +8,14 @@ Required properties: - compatible : must be one of the following "ti,twl4030-power" "ti,twl4030-power-reset" + "ti,twl4030-power-idle" The use of ti,twl4030-power-reset is recommended at least on 3530 that needs a special configuration for warm reset to work. +When using ti,twl4030-power-idle, the TI recommended configuration +for idle modes is loaded to the tlw4030 PMIC. + Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the system poweroffs. diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index cb5b0cb8f933..2bfbb40ca9d2 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -145,6 +145,7 @@ enum { * omap3 has been made DT only. */ #define TWL_DFLT_DELAY 2 /* typically 2 32 KiHz cycles */ +#define TWL_DEV_GRP_P123 (DEV_GRP_P1 | DEV_GRP_P2 | DEV_GRP_P3) #define TWL_RESOURCE_SET(res, state) \ { MSG_SINGULAR(DEV_GRP_NULL, (res), (state)), TWL_DFLT_DELAY } #define TWL_RESOURCE_ON(res) TWL_RESOURCE_SET(res, RES_STATE_ACTIVE) @@ -154,14 +155,26 @@ enum { * It seems that type1 and type2 is just the resource init order * number for the type1 and type2 group. */ +#define TWL_RESOURCE_SET_ACTIVE(res, state) \ + { MSG_SINGULAR(DEV_GRP_NULL, (res), RES_STATE_ACTIVE), (state) } #define TWL_RESOURCE_GROUP_RESET(group, type1, type2) \ { MSG_BROADCAST(DEV_GRP_NULL, (group), (type1), (type2), \ RES_STATE_WRST), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_SLEEP(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_SLEEP), TWL_DFLT_DELAY } +#define TWL_RESOURCE_GROUP_ACTIVE(group, type, type2) \ + { MSG_BROADCAST(DEV_GRP_NULL, (group), (type), (type2), \ + RES_STATE_ACTIVE), TWL_DFLT_DELAY } #define TWL_REMAP_SLEEP(res, devgrp, typ, typ2) \ { .resource = (res), .devgroup = (devgrp), \ .type = (typ), .type2 = (typ2), \ .remap_off = TWL_REMAP_OFF, \ .remap_sleep = TWL_REMAP_SLEEP, } +#define TWL_REMAP_OFF(res, devgrp, typ, typ2) \ + { .resource = (res), .devgroup = (devgrp), \ + .type = (typ), .type2 = (typ2), \ + .remap_off = TWL_REMAP_OFF, .remap_sleep = TWL_REMAP_OFF, } static int twl4030_write_script_byte(u8 address, u8 byte) { @@ -638,11 +651,104 @@ static struct twl4030_power_data omap3_reset = { .resource_config = omap3_rconfig, }; +/* Recommended generic default idle configuration for off-idle */ + +/* Broadcast message to put res to sleep */ +static struct twl4030_ins omap3_idle_sleep_on_seq[] = { + TWL_RESOURCE_GROUP_SLEEP(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_sleep_on_script = { + .script = omap3_idle_sleep_on_seq, + .size = ARRAY_SIZE(omap3_idle_sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p12_seq[] = { + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p12_script = { + .script = omap3_idle_wakeup_p12_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p12_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +/* Broadcast message to put res to active */ +static struct twl4030_ins omap3_idle_wakeup_p3_seq[] = { + TWL_RESOURCE_SET_ACTIVE(RES_CLKEN, 0x37), + TWL_RESOURCE_GROUP_ACTIVE(RES_GRP_ALL, RES_TYPE_ALL, 0), +}; + +static struct twl4030_script omap3_idle_wakeup_p3_script = { + .script = omap3_idle_wakeup_p3_seq, + .size = ARRAY_SIZE(omap3_idle_wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_script *omap3_idle_scripts[] = { + &omap3_idle_wakeup_p12_script, + &omap3_idle_wakeup_p3_script, + &omap3_wrst_script, + &omap3_idle_sleep_on_script, +}; + +/* + * Recommended configuration based on "Recommended Sleep + * Sequences for the Zoom Platform": + * http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf + * Note that the type1 and type2 seem to be just the init order number + * for type1 and type2 groups as specified in the document mentioned + * above. + */ +static struct twl4030_resconfig omap3_idle_rconfig[] = { + TWL_REMAP_SLEEP(RES_VAUX1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX3, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VAUX4, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC1, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VMMC2, DEV_GRP_NULL, 0, 0), + TWL_REMAP_OFF(RES_VPLL1, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VPLL2, DEV_GRP_P1, 0, 0), + TWL_REMAP_SLEEP(RES_VSIM, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VDAC, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VINTANA1, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VINTANA2, TWL_DEV_GRP_P123, 0, 2), + TWL_REMAP_SLEEP(RES_VINTDIG, TWL_DEV_GRP_P123, 1, 2), + TWL_REMAP_SLEEP(RES_VIO, TWL_DEV_GRP_P123, 2, 2), + TWL_REMAP_OFF(RES_VDD1, DEV_GRP_P1, 4, 1), + TWL_REMAP_OFF(RES_VDD2, DEV_GRP_P1, 3, 1), + TWL_REMAP_SLEEP(RES_VUSB_1V5, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_1V8, DEV_GRP_NULL, 0, 0), + TWL_REMAP_SLEEP(RES_VUSB_3V1, TWL_DEV_GRP_P123, 0, 0), + /* Resource #20 USB charge pump skipped */ + TWL_REMAP_SLEEP(RES_REGEN, TWL_DEV_GRP_P123, 2, 1), + TWL_REMAP_SLEEP(RES_NRES_PWRON, TWL_DEV_GRP_P123, 0, 1), + TWL_REMAP_SLEEP(RES_CLKEN, TWL_DEV_GRP_P123, 3, 2), + TWL_REMAP_SLEEP(RES_SYSEN, TWL_DEV_GRP_P123, 6, 1), + TWL_REMAP_SLEEP(RES_HFCLKOUT, DEV_GRP_P3, 0, 2), + TWL_REMAP_SLEEP(RES_32KCLKOUT, TWL_DEV_GRP_P123, 0, 0), + TWL_REMAP_SLEEP(RES_RESET, TWL_DEV_GRP_P123, 6, 0), + TWL_REMAP_SLEEP(RES_MAIN_REF, TWL_DEV_GRP_P123, 0, 0), + { /* Terminator */ }, +}; + +static struct twl4030_power_data omap3_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, +}; + static struct of_device_id twl4030_power_of_match[] = { { .compatible = "ti,twl4030-power-reset", .data = &omap3_reset, }, + { + .compatible = "ti,twl4030-power-idle", + .data = &omap3_idle, + }, { }, }; MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -- cgit v1.2.3 From 43fef47f94a1ae46fb2720dada32fa3b5547bee2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 13 May 2014 18:34:09 -0700 Subject: mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle Some oscillators can be turned off during off-idle saving few a little bit power at the cost of the oscillator start up latency. If you board can do this, you can now enable it by using the ti,twl4030-power-idle-osc-off compatible flag. Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/twl4030-power.txt | 6 ++++++ drivers/mfd/twl4030-power.c | 17 +++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt index bbd66039202a..b9ee7b98d3e2 100644 --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt @@ -9,6 +9,7 @@ Required properties: "ti,twl4030-power" "ti,twl4030-power-reset" "ti,twl4030-power-idle" + "ti,twl4030-power-idle-osc-off" The use of ti,twl4030-power-reset is recommended at least on 3530 that needs a special configuration for warm reset to work. @@ -16,6 +17,11 @@ The use of ti,twl4030-power-reset is recommended at least on When using ti,twl4030-power-idle, the TI recommended configuration for idle modes is loaded to the tlw4030 PMIC. +When using ti,twl4030-power-idle-osc-off, the TI recommended +configuration is used with the external oscillator being shut +down during off-idle. Note that this does not work on all boards +depending on how the external oscillator is wired. + Optional properties: - ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the system poweroffs. diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c index 4846c7b48ebb..3bc969a5916b 100644 --- a/drivers/mfd/twl4030-power.c +++ b/drivers/mfd/twl4030-power.c @@ -761,6 +761,19 @@ static struct twl4030_power_data omap3_idle = { .resource_config = omap3_idle_rconfig, }; +/* Disable 32 KiHz oscillator during idle */ +static struct twl4030_resconfig osc_off_rconfig[] = { + TWL_REMAP_OFF(RES_CLKEN, DEV_GRP_P1 | DEV_GRP_P3, 3, 2), + { /* Terminator */ }, +}; + +static struct twl4030_power_data osc_off_idle = { + .scripts = omap3_idle_scripts, + .num = ARRAY_SIZE(omap3_idle_scripts), + .resource_config = omap3_idle_rconfig, + .board_config = osc_off_rconfig, +}; + static struct of_device_id twl4030_power_of_match[] = { { .compatible = "ti,twl4030-power-reset", @@ -770,6 +783,10 @@ static struct of_device_id twl4030_power_of_match[] = { .compatible = "ti,twl4030-power-idle", .data = &omap3_idle, }, + { + .compatible = "ti,twl4030-power-idle-osc-off", + .data = &osc_off_idle, + }, { }, }; MODULE_DEVICE_TABLE(of, twl4030_power_of_match); -- cgit v1.2.3 From aa76fcf473f6bfa839f37f77b6fdb71f0fb88d8f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 21 Feb 2014 17:36:21 +0200 Subject: CLK: TI: DPLL: add support for omap2 core dpll OMAP2 has slightly different DPLL compared to later OMAP generations. This patch adds support for the ti,omap2-dpll-core-clock and also adds the bindings documentation. Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/dpll.txt | 9 +++ arch/arm/mach-omap2/clock.h | 1 - arch/arm/mach-omap2/clock2xxx.h | 4 -- drivers/clk/ti/dpll.c | 78 +++++++++++++++++++--- include/linux/clk/ti.h | 6 ++ 5 files changed, 82 insertions(+), 16 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 30bfdb7c9f18..50a1a427608f 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -30,6 +30,7 @@ Required properties: "ti,am3-dpll-clock", "ti,am3-dpll-core-clock", "ti,am3-dpll-x2-clock", + "ti,omap2-dpll-core-clock", - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks, first entry lists reference clock @@ -41,6 +42,7 @@ Required properties: "mult-div1" - contains the multiplier / divider register base address "autoidle" - contains the autoidle register base address (optional) ti,am3-* dpll types do not have autoidle register + ti,omap2-* dpll type does not support idlest / autoidle registers Optional properties: - DPLL mode setting - defining any one or more of the following overrides @@ -73,3 +75,10 @@ Examples: clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x90>, <0x5c>, <0x68>; }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index bda767a9dea8..f6e9904d7a75 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -279,7 +279,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h index 539dc08afbba..45f41a411603 100644 --- a/arch/arm/mach-omap2/clock2xxx.h +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -21,10 +21,6 @@ unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, unsigned long parent_rate); -unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, - unsigned long parent_rate); -int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, - unsigned long parent_rate); void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index dda262db42ea..34e233990212 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -35,21 +35,18 @@ static const struct clk_ops dpll_m4xen_ck_ops = { .set_rate = &omap3_noncore_dpll_set_rate, .get_parent = &omap2_init_dpll_parent, }; +#else +static const struct clk_ops dpll_m4xen_ck_ops = {}; #endif +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ + defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) static const struct clk_ops dpll_core_ck_ops = { .recalc_rate = &omap3_dpll_recalc, .get_parent = &omap2_init_dpll_parent, }; -#ifdef CONFIG_ARCH_OMAP3 -static const struct clk_ops omap3_dpll_core_ck_ops = { - .get_parent = &omap2_init_dpll_parent, - .recalc_rate = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, -}; -#endif - static const struct clk_ops dpll_ck_ops = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, @@ -65,6 +62,33 @@ static const struct clk_ops dpll_no_gate_ck_ops = { .round_rate = &omap2_dpll_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; +#else +static const struct clk_ops dpll_core_ck_ops = {}; +static const struct clk_ops dpll_ck_ops = {}; +static const struct clk_ops dpll_no_gate_ck_ops = {}; +const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static const struct clk_ops omap2_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap2_dpllcore_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap2_reprogram_dpllcore, +}; +#else +static const struct clk_ops omap2_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#else +static const struct clk_ops omap3_dpll_core_ck_ops = {}; +#endif #ifdef CONFIG_ARCH_OMAP3 static const struct clk_ops omap3_dpll_ck_ops = { @@ -237,10 +261,27 @@ static void __init of_ti_dpll_setup(struct device_node *node, init->parent_names = parent_names; dd->control_reg = ti_clk_get_reg_addr(node, 0); - dd->idlest_reg = ti_clk_get_reg_addr(node, 1); - dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); - if (!dd->control_reg || !dd->idlest_reg || !dd->mult_div1_reg) + /* + * Special case for OMAP2 DPLL, register order is different due to + * missing idlest_reg, also clkhwops is different. Detected from + * missing idlest_mask. + */ + if (!dd->idlest_mask) { + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1); +#ifdef CONFIG_ARCH_OMAP2 + clk_hw->ops = &clkhwops_omap2xxx_dpll; + omap2xxx_clkt_dpllcore_init(&clk_hw->hw); +#endif + } else { + dd->idlest_reg = ti_clk_get_reg_addr(node, 1); + if (!dd->idlest_reg) + goto cleanup; + + dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2); + } + + if (!dd->control_reg || !dd->mult_div1_reg) goto cleanup; if (dd->autoidle_mask) { @@ -547,3 +588,18 @@ static void __init of_ti_am3_core_dpll_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", of_ti_am3_core_dpll_setup); + +static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .enable_mask = 0x3, + .mult_mask = 0x3ff << 12, + .div1_mask = 0xf << 8, + .max_divider = 16, + .min_divider = 1, + }; + + of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", + of_ti_omap2_core_dpll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 4a21a872dbbd..753878c6fa52 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -259,6 +259,11 @@ int omap2_dflt_clk_enable(struct clk_hw *hw); void omap2_dflt_clk_disable(struct clk_hw *hw); int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap3_clk_lock_dpll5(void); +unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); @@ -287,6 +292,7 @@ static inline void of_ti_clk_allow_autoidle_all(void) { } static inline void of_ti_clk_deny_autoidle_all(void) { } #endif +extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v1.2.3 From 4d008589e271e28eae728eef7f5fb1f658f12b9f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 24 Feb 2014 16:06:34 +0200 Subject: CLK: TI: APLL: add support for omap2 aplls This patch adds support for omap2 type aplls, which have gating and autoidle functionality. Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/apll.txt | 24 ++- arch/arm/mach-omap2/clock.h | 11 -- drivers/clk/ti/apll.c | 181 +++++++++++++++++++++ include/linux/clk/ti.h | 21 ++- 4 files changed, 220 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt index 7faf5a68b3be..ade4dd4c30f0 100644 --- a/Documentation/devicetree/bindings/clock/ti/apll.txt +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -14,18 +14,32 @@ a subtype of a DPLL [2], although a simplified one at that. [2] Documentation/devicetree/bindings/clock/ti/dpll.txt Required properties: -- compatible : shall be "ti,dra7-apll-clock" +- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock" - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of parent clocks (clk-ref and clk-bypass) - reg : address and length of the register set for controlling the APLL. It contains the information of registers in the following order: - "control" - contains the control register base address - "idlest" - contains the idlest register base address + "control" - contains the control register offset + "idlest" - contains the idlest register offset + "autoidle" - contains the autoidle register offset (OMAP2 only) +- ti,clock-frequency : static clock frequency for the clock (OMAP2 only) +- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only) +- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only) Examples: - apll_pcie_ck: apll_pcie_ck@4a008200 { + apll_pcie_ck: apll_pcie_ck { #clock-cells = <0>; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; - reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; + reg = <0x021c>, <0x0220>; compatible = "ti,dra7-apll-clock"; }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index f6e9904d7a75..eb441d137843 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -178,17 +178,6 @@ struct clksel { const struct clksel_rate *rates; }; -struct clk_hw_omap_ops { - void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); - void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, - u8 *other_bit); - void (*allow_idle)(struct clk_hw_omap *oclk); - void (*deny_idle)(struct clk_hw_omap *oclk); -}; - unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c index b986f61f5a77..5428c9c547cd 100644 --- a/drivers/clk/ti/apll.c +++ b/drivers/clk/ti/apll.c @@ -221,3 +221,184 @@ cleanup: kfree(init); } CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup); + +#define OMAP2_EN_APLL_LOCKED 0x3 +#define OMAP2_EN_APLL_STOPPED 0x0 + +static int omap2_apll_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ad->enable_mask; + + v >>= __ffs(ad->enable_mask); + + return v == OMAP2_EN_APLL_LOCKED ? 1 : 0; +} + +static unsigned long omap2_apll_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + if (omap2_apll_is_enabled(hw)) + return clk->fixed_rate; + + return 0; +} + +static int omap2_apll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + int i = 0; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_LOCKED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); + + while (1) { + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + if (v & ad->idlest_mask) + break; + if (i > MAX_APLL_WAIT_TRIES) + break; + i++; + udelay(1); + } + + if (i == MAX_APLL_WAIT_TRIES) { + pr_warn("%s failed to transition to locked\n", + __clk_get_name(clk->hw.clk)); + return -EBUSY; + } + + return 0; +} + +static void omap2_apll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= OMAP2_EN_APLL_STOPPED << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +static struct clk_ops omap2_apll_ops = { + .enable = &omap2_apll_enable, + .disable = &omap2_apll_disable, + .is_enabled = &omap2_apll_is_enabled, + .recalc_rate = &omap2_apll_recalc, +}; + +static void omap2_apll_set_autoidle(struct clk_hw_omap *clk, u32 val) +{ + struct dpll_data *ad = clk->dpll_data; + u32 v; + + v = ti_clk_ll_ops->clk_readl(ad->autoidle_reg); + v &= ~ad->autoidle_mask; + v |= val << __ffs(ad->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +#define OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP 0x3 +#define OMAP2_APLL_AUTOIDLE_DISABLE 0x0 + +static void omap2_apll_allow_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_LOW_POWER_STOP); +} + +static void omap2_apll_deny_idle(struct clk_hw_omap *clk) +{ + omap2_apll_set_autoidle(clk, OMAP2_APLL_AUTOIDLE_DISABLE); +} + +static struct clk_hw_omap_ops omap2_apll_hwops = { + .allow_idle = &omap2_apll_allow_idle, + .deny_idle = &omap2_apll_deny_idle, +}; + +static void __init of_omap2_apll_setup(struct device_node *node) +{ + struct dpll_data *ad = NULL; + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + struct clk *clk; + const char *parent_name; + u32 val; + + ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + + if (!ad || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = ad; + clk_hw->hw.init = init; + init->ops = &omap2_apll_ops; + init->name = node->name; + clk_hw->ops = &omap2_apll_hwops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents != 1) { + pr_err("%s must have one parent\n", node->name); + goto cleanup; + } + + parent_name = of_clk_get_parent_name(node, 0); + init->parent_names = &parent_name; + + if (of_property_read_u32(node, "ti,clock-frequency", &val)) { + pr_err("%s missing clock-frequency\n", node->name); + goto cleanup; + } + clk_hw->fixed_rate = val; + + if (of_property_read_u32(node, "ti,bit-shift", &val)) { + pr_err("%s missing bit-shift\n", node->name); + goto cleanup; + } + + clk_hw->enable_bit = val; + ad->enable_mask = 0x3 << val; + ad->autoidle_mask = 0x3 << val; + + if (of_property_read_u32(node, "ti,idlest-shift", &val)) { + pr_err("%s missing idlest-shift\n", node->name); + goto cleanup; + } + + ad->idlest_mask = 1 << val; + + ad->control_reg = ti_clk_get_reg_addr(node, 0); + ad->autoidle_reg = ti_clk_get_reg_addr(node, 1); + ad->idlest_reg = ti_clk_get_reg_addr(node, 2); + + if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg) + goto cleanup; + + clk = clk_register(NULL, &clk_hw->hw); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(init); + return; + } +cleanup: + kfree(ad); + kfree(clk_hw); + kfree(init); +} +CLK_OF_DECLARE(omap2_apll_clock, "ti,omap2-apll-clock", + of_omap2_apll_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 753878c6fa52..44bf84002a34 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -94,7 +94,26 @@ struct dpll_data { u8 flags; }; -struct clk_hw_omap_ops; +struct clk_hw_omap; + +/** + * struct clk_hw_omap_ops - OMAP clk ops + * @find_idlest: find idlest register information for a clock + * @find_companion: find companion clock register information for a clock, + * basically converts CM_ICLKEN* <-> CM_FCLKEN* + * @allow_idle: enables autoidle hardware functionality for a clock + * @deny_idle: prevent autoidle hardware functionality for a clock + */ +struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); + void (*find_companion)(struct clk_hw_omap *oclk, + void __iomem **other_reg, + u8 *other_bit); + void (*allow_idle)(struct clk_hw_omap *oclk); + void (*deny_idle)(struct clk_hw_omap *oclk); +}; /** * struct clk_hw_omap - OMAP struct clk -- cgit v1.2.3 From 9fa160cb9f2f51ef8274df7b4f390edf6ae491c3 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 27 Feb 2014 17:21:33 +0200 Subject: CLK: TI: gate: fixed DT binding documentation bugs ti,composite-gate-clock documentation was missing, also the register offset examples were wrong. Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/gate.txt | 29 +++++++++++++++++++--- 1 file changed, 25 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 125281aaa4ca..03f8fdee62a7 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -25,6 +25,11 @@ Required properties: to map clockdomains properly "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, required for a hardware errata + "ti,composite-gate-clock" - composite gate clock, to be part of composite + clock + "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait + for clock to be active before returning + from clk_enable() - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : offset for register controlling adjustable gate, not needed for @@ -41,7 +46,7 @@ Examples: #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&core_96m_fck>; - reg = <0x48004a00 0x4>; + reg = <0x0a00>; ti,bit-shift = <25>; }; @@ -57,7 +62,7 @@ Examples: #clock-cells = <0>; compatible = "ti,dss-gate-clock"; clocks = <&dpll4_m4x2_ck>; - reg = <0x48004e00 0x4>; + reg = <0x0e00>; ti,bit-shift = <0>; }; @@ -65,7 +70,7 @@ Examples: #clock-cells = <0>; compatible = "ti,am35xx-gate-clock"; clocks = <&ipss_ick>; - reg = <0x4800259c 0x4>; + reg = <0x059c>; ti,bit-shift = <1>; }; @@ -80,6 +85,22 @@ Examples: compatible = "ti,hsdiv-gate-clock"; clocks = <&dpll4_m2x2_mul_ck>; ti,bit-shift = <0x1b>; - reg = <0x48004d00 0x4>; + reg = <0x0d00>; ti,set-bit-to-disable; }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; -- cgit v1.2.3 From de742570745e12b53c70130ace958f2a60044000 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 25 Feb 2014 19:16:07 +0200 Subject: CLK: TI: interface: add support for omap2430 specific interface clock OMAP2430 I2CHS modules require specific hardware ops to be used, so added a new compatible string for this. Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/interface.txt | 2 ++ arch/arm/mach-omap2/clock.h | 1 - drivers/clk/ti/interface.c | 11 +++++++++++ include/linux/clk/ti.h | 1 + 4 files changed, 14 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 064e8caccac3..3111a409fea6 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling + "ti,omap2430-interface-clock" - interface clock with OMAP2430 specific HW + handling - #clock-cells : from common clock binding; shall be set to 0 - clocks : link to phandle of parent clock - reg : base address for the control register diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index eb441d137843..12f54d428d7c 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -268,7 +268,6 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; -extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; /* clksel_rate blocks shared between OMAP44xx and AM33xx */ extern const struct clksel_rate div_1_0_rates[]; diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c index 320a2b168bb2..9c3e8c4aaa40 100644 --- a/drivers/clk/ti/interface.c +++ b/drivers/clk/ti/interface.c @@ -94,6 +94,7 @@ static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node) CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock", of_ti_no_wait_interface_clk_setup); +#ifdef CONFIG_ARCH_OMAP3 static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node) { _of_ti_interface_clk_setup(node, @@ -123,3 +124,13 @@ static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node) } CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock", of_ti_am35xx_interface_clk_setup); +#endif + +#ifdef CONFIG_SOC_OMAP2430 +static void __init of_ti_omap2430_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_omap2430_i2chs_wait); +} +CLK_OF_DECLARE(ti_omap2430_interface_clk, "ti,omap2430-interface-clock", + of_ti_omap2430_interface_clk_setup); +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 44bf84002a34..a8390d478528 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -312,6 +312,7 @@ static inline void of_ti_clk_deny_autoidle_all(void) { } #endif extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; -- cgit v1.2.3 From 2d5e447914722f3c79103ad54baa1170661ac553 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 7 May 2014 13:20:46 +0300 Subject: dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings Audio Tracking Logic is designed to be used by HD Radio applications to synchronize the audio output clocks to the baseband clock. ATL can be also used to track errors between two reference clocks (BWS, AWS) and generate a modulated clock output which averages to some desired frequency. In essence ATL is generating a clock to be used by an audio codec and also to be used by the SoC as MCLK. To be able to integrate the ATL provided clocks to the clock tree we need two types of DT binding: - DT clock nodes to represent the ATL clocks towards the CCF - binding for the ATL IP itself which is going to handle the hw configuration The reason for this type of setup is that ATL itself is a separate device in the SoC, it has it's own address space and clock domain. Other IPs can use the ATL generated clock as their functional clock (McASPs for example) and external components like audio codecs can also use the very same clock as their MCLK. The ATL IP in DRA7 contains 4 ATL instences. Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- .../devicetree/bindings/clock/ti/dra7-atl.txt | 96 ++++++++++++++++++++++ include/dt-bindings/clk/ti-dra7-atl.h | 40 +++++++++ 2 files changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/ti/dra7-atl.txt create mode 100644 include/dt-bindings/clk/ti-dra7-atl.h (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt new file mode 100644 index 000000000000..585e8c191f50 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt @@ -0,0 +1,96 @@ +Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC. + +The ATL IP is used to generate clock to be used to synchronize baseband and +audio codec. A single ATL IP provides four ATL clock instances sharing the same +functional clock but can be configured to provide different clocks. +ATL can maintain a clock averages to some desired frequency based on the bws/aws +signals - can compensate the drift between the two ws signal. + +In order to provide the support for ATL and it's output clocks (which can be used +internally within the SoC or external components) two sets of bindings is needed: + +Clock tree binding: +This binding uses the common clock binding[1]. +To be able to integrate the ATL clocks with DT clock tree. +Provides ccf level representation of the ATL clocks to be used by drivers. +Since the clock instances are part of a single IP this binding is used as a node +for the DT clock tree, the IP driver is needed to handle the actual configuration +of the IP. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,dra7-atl-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles to functional clock of ATL + +Binding for the IP driver: +This binding is used to configure the IP driver which is going to handle the +configuration of the IP for the ATL clock instances. + +Required properties: +- compatible : shall be "ti,dra7-atl" +- reg : base address for the ATL IP +- ti,provided-clocks : List of phandles to the clocks associated with the ATL +- clocks : link phandles to functional clock of ATL +- clock-names : Shall be set to "fck" +- ti,hwmods : Shall be set to "atl" + +Optional properties: +Configuration of ATL instances: +- atl{0/1/2/3} { + - bws : Baseband word select signal selection + - aws : Audio word select signal selection +}; + +For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include +file. + +Examples: +/* clock bindings for atl provided clocks */ +atl_clkin0_ck: atl_clkin0_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin1_ck: atl_clkin1_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin2_ck: atl_clkin2_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +atl_clkin3_ck: atl_clkin3_ck { + #clock-cells = <0>; + compatible = "ti,dra7-atl-clock"; + clocks = <&atl_gfclk_mux>; +}; + +/* binding for the IP */ +atl: atl@4843c000 { + compatible = "ti,dra7-atl"; + reg = <0x4843c000 0x3ff>; + ti,hwmods = "atl"; + ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, + <&atl_clkin2_ck>, <&atl_clkin3_ck>; + clocks = <&atl_gfclk_mux>; + clock-names = "fck"; + status = "disabled"; +}; + +#include + +&atl { + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; diff --git a/include/dt-bindings/clk/ti-dra7-atl.h b/include/dt-bindings/clk/ti-dra7-atl.h new file mode 100644 index 000000000000..42dd4164f6f4 --- /dev/null +++ b/include/dt-bindings/clk/ti-dra7-atl.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for DRA7 ATL (Audio Tracking Logic) + * + * The constants defined in this header are used in dts files + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Peter Ujfalusi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_DRA7_ATL_H +#define _DT_BINDINGS_CLK_DRA7_ATL_H + +#define DRA7_ATL_WS_MCASP1_FSR 0 +#define DRA7_ATL_WS_MCASP1_FSX 1 +#define DRA7_ATL_WS_MCASP2_FSR 2 +#define DRA7_ATL_WS_MCASP2_FSX 3 +#define DRA7_ATL_WS_MCASP3_FSX 4 +#define DRA7_ATL_WS_MCASP4_FSX 5 +#define DRA7_ATL_WS_MCASP5_FSX 6 +#define DRA7_ATL_WS_MCASP6_FSX 7 +#define DRA7_ATL_WS_MCASP7_FSX 8 +#define DRA7_ATL_WS_MCASP8_FSX 9 +#define DRA7_ATL_WS_MCASP8_AHCLKX 10 +#define DRA7_ATL_WS_XREF_CLK3 11 +#define DRA7_ATL_WS_XREF_CLK0 12 +#define DRA7_ATL_WS_XREF_CLK1 13 +#define DRA7_ATL_WS_XREF_CLK2 14 +#define DRA7_ATL_WS_OSC1_X1 15 + +#endif -- cgit v1.2.3 From b8b52471e87a713e61d26fa2f546fda0fb04e8fd Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Tue, 22 Apr 2014 04:09:10 +0530 Subject: drm/exynos: dp: support hotplug detection via GPIO Certain bridge chips use a GPIO to indicate the cable status instead of the I_DP_HPD pin. This adds an optional device-tree property, "samsung,hpd-gpio", to the exynos-dp controller which indicates that the specified GPIO should be used for hotplug detection. The GPIO is then set up as an edge-triggered interrupt where the rising edge indicates hotplug-in and the falling edge indicates hotplug-out. Signed-off-by: Andrew Bresticker Signed-off-by: Rahul Sharma Signed-off-by: Ajay Kumar Acked-by: Jingoo Han Signed-off-by: Inki Dae --- .../devicetree/bindings/video/exynos_dp.txt | 4 ++ drivers/gpu/drm/exynos/exynos_dp_core.c | 32 ++++++++++++++-- drivers/gpu/drm/exynos/exynos_dp_core.h | 1 + drivers/gpu/drm/exynos/exynos_dp_reg.c | 44 ++++++++++++++++------ 4 files changed, 66 insertions(+), 15 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt index 57ccdde02c3a..53dbccfa80ca 100644 --- a/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt @@ -62,6 +62,10 @@ Optional properties for dp-controller: -hsync-active-high: HSYNC polarity configuration. High if defined, Low if not defined + -samsung,hpd-gpio: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug + detection Example: diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c index 1f8914b44714..2b30c55ab050 100644 --- a/drivers/gpu/drm/exynos/exynos_dp_core.c +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include #include + + KMS Locking +!Pdrivers/gpu/drm/drm_modeset_lock.c kms locking +!Iinclude/drm/drm_modeset_lock.h +!Edrivers/gpu/drm/drm_modeset_lock.c + diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 863db8415c22..dd2ba4269740 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -13,7 +13,8 @@ drm-y := drm_auth.o drm_buffer.o drm_bufs.o drm_cache.o \ drm_crtc.o drm_modes.o drm_edid.o \ drm_info.o drm_debugfs.o drm_encoder_slave.o \ drm_trace_points.o drm_global.o drm_prime.o \ - drm_rect.o drm_vma_manager.o drm_flip_work.o + drm_rect.o drm_vma_manager.o drm_flip_work.o \ + drm_modeset_lock.o drm-$(CONFIG_COMPAT) += drm_ioc32.o drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index f3b98d4b6f46..43735f38cd17 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "drm_crtc_internal.h" @@ -50,14 +51,42 @@ */ void drm_modeset_lock_all(struct drm_device *dev) { - struct drm_crtc *crtc; + struct drm_mode_config *config = &dev->mode_config; + struct drm_modeset_acquire_ctx *ctx; + int ret; - mutex_lock(&dev->mode_config.mutex); + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (WARN_ON(!ctx)) + return; - mutex_lock(&dev->mode_config.connection_mutex); + mutex_lock(&config->mutex); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - mutex_lock_nest_lock(&crtc->mutex, &dev->mode_config.mutex); + drm_modeset_acquire_init(ctx, 0); + +retry: + ret = drm_modeset_lock(&config->connection_mutex, ctx); + if (ret) + goto fail; + ret = drm_modeset_lock_all_crtcs(dev, ctx); + if (ret) + goto fail; + + WARN_ON(config->acquire_ctx); + + /* now we hold the locks, so now that it is safe, stash the + * ctx for drm_modeset_unlock_all(): + */ + config->acquire_ctx = ctx; + + drm_warn_on_modeset_not_all_locked(dev); + + return; + +fail: + if (ret == -EDEADLK) { + drm_modeset_backoff(ctx); + goto retry; + } } EXPORT_SYMBOL(drm_modeset_lock_all); @@ -69,12 +98,17 @@ EXPORT_SYMBOL(drm_modeset_lock_all); */ void drm_modeset_unlock_all(struct drm_device *dev) { - struct drm_crtc *crtc; + struct drm_mode_config *config = &dev->mode_config; + struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx; - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - mutex_unlock(&crtc->mutex); + if (WARN_ON(!ctx)) + return; + + config->acquire_ctx = NULL; + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); - mutex_unlock(&dev->mode_config.connection_mutex); + kfree(ctx); mutex_unlock(&dev->mode_config.mutex); } @@ -95,9 +129,9 @@ void drm_warn_on_modeset_not_all_locked(struct drm_device *dev) return; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) - WARN_ON(!mutex_is_locked(&crtc->mutex)); + WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); - WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); } EXPORT_SYMBOL(drm_warn_on_modeset_not_all_locked); @@ -671,6 +705,8 @@ void drm_framebuffer_remove(struct drm_framebuffer *fb) } EXPORT_SYMBOL(drm_framebuffer_remove); +DEFINE_WW_CLASS(crtc_ww_class); + /** * drm_crtc_init_with_planes - Initialise a new CRTC object with * specified primary and cursor planes. @@ -690,6 +726,7 @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, void *cursor, const struct drm_crtc_funcs *funcs) { + struct drm_mode_config *config = &dev->mode_config; int ret; crtc->dev = dev; @@ -697,8 +734,9 @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, crtc->invert_dimensions = false; drm_modeset_lock_all(dev); - mutex_init(&crtc->mutex); - mutex_lock_nest_lock(&crtc->mutex, &dev->mode_config.mutex); + drm_modeset_lock_init(&crtc->mutex); + /* dropped by _unlock_all(): */ + drm_modeset_lock(&crtc->mutex, config->acquire_ctx); ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); if (ret) @@ -706,8 +744,8 @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, crtc->base.properties = &crtc->properties; - list_add_tail(&crtc->head, &dev->mode_config.crtc_list); - dev->mode_config.num_crtc++; + list_add_tail(&crtc->head, &config->crtc_list); + config->num_crtc++; crtc->primary = primary; if (primary) @@ -735,6 +773,8 @@ void drm_crtc_cleanup(struct drm_crtc *crtc) kfree(crtc->gamma_store); crtc->gamma_store = NULL; + drm_modeset_lock_fini(&crtc->mutex); + drm_mode_object_put(dev, &crtc->base); list_del(&crtc->head); dev->mode_config.num_crtc--; @@ -1798,7 +1838,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id); mutex_lock(&dev->mode_config.mutex); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); connector = drm_connector_find(dev, out_resp->connector_id); if (!connector) { @@ -1897,7 +1937,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->count_encoders = encoders_count; out: - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); mutex_unlock(&dev->mode_config.mutex); return ret; @@ -2481,7 +2521,7 @@ static int drm_mode_cursor_common(struct drm_device *dev, return -ENOENT; } - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); if (req->flags & DRM_MODE_CURSOR_BO) { if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) { ret = -ENXIO; @@ -2505,7 +2545,7 @@ static int drm_mode_cursor_common(struct drm_device *dev, } } out: - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); return ret; @@ -4198,7 +4238,7 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev, if (!crtc) return -ENOENT; - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); if (crtc->primary->fb == NULL) { /* The framebuffer is currently unbound, presumably * due to a hotplug event, that userspace has not @@ -4282,7 +4322,7 @@ out: drm_framebuffer_unreference(fb); if (old_fb) drm_framebuffer_unreference(old_fb); - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); return ret; } @@ -4647,7 +4687,7 @@ EXPORT_SYMBOL(drm_format_vert_chroma_subsampling); void drm_mode_config_init(struct drm_device *dev) { mutex_init(&dev->mode_config.mutex); - mutex_init(&dev->mode_config.connection_mutex); + drm_modeset_lock_init(&dev->mode_config.connection_mutex); mutex_init(&dev->mode_config.idr_mutex); mutex_init(&dev->mode_config.fb_lock); INIT_LIST_HEAD(&dev->mode_config.fb_list); @@ -4747,5 +4787,6 @@ void drm_mode_config_cleanup(struct drm_device *dev) } idr_destroy(&dev->mode_config.crtc_idr); + drm_modeset_lock_fini(&dev->mode_config.connection_mutex); } EXPORT_SYMBOL(drm_mode_config_cleanup); diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index b55d27c872f6..eb1c062e04b2 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -89,8 +89,7 @@ bool drm_helper_encoder_in_use(struct drm_encoder *encoder) struct drm_device *dev = encoder->dev; WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); - + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); list_for_each_entry(connector, &dev->mode_config.connector_list, head) if (connector->encoder == encoder) return true; diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 1ddc17464250..43329cee299f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -331,6 +331,10 @@ static bool drm_fb_helper_force_kernel_mode(void) if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) continue; + /* NOTE: we use lockless flag below to avoid grabbing other + * modeset locks. So just trylock the underlying mutex + * directly: + */ if (!mutex_trylock(&dev->mode_config.mutex)) { error = true; continue; diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c new file mode 100644 index 000000000000..7c2497dea1e9 --- /dev/null +++ b/drivers/gpu/drm/drm_modeset_lock.c @@ -0,0 +1,247 @@ +/* + * Copyright (C) 2014 Red Hat + * Author: Rob Clark + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include + +/** + * DOC: kms locking + * + * As KMS moves toward more fine grained locking, and atomic ioctl where + * userspace can indirectly control locking order, it becomes necessary + * to use ww_mutex and acquire-contexts to avoid deadlocks. But because + * the locking is more distributed around the driver code, we want a bit + * of extra utility/tracking out of our acquire-ctx. This is provided + * by drm_modeset_lock / drm_modeset_acquire_ctx. + * + * For basic principles of ww_mutex, see: Documentation/ww-mutex-design.txt + * + * The basic usage pattern is to: + * + * drm_modeset_acquire_init(&ctx) + * retry: + * foreach (lock in random_ordered_set_of_locks) { + * ret = drm_modeset_lock(lock, &ctx) + * if (ret == -EDEADLK) { + * drm_modeset_backoff(&ctx); + * goto retry; + * } + * } + * + * ... do stuff ... + * + * drm_modeset_drop_locks(&ctx); + * drm_modeset_acquire_fini(&ctx); + */ + + +/** + * drm_modeset_acquire_init - initialize acquire context + * @ctx: the acquire context + * @flags: for future + */ +void drm_modeset_acquire_init(struct drm_modeset_acquire_ctx *ctx, + uint32_t flags) +{ + ww_acquire_init(&ctx->ww_ctx, &crtc_ww_class); + INIT_LIST_HEAD(&ctx->locked); +} +EXPORT_SYMBOL(drm_modeset_acquire_init); + +/** + * drm_modeset_acquire_fini - cleanup acquire context + * @ctx: the acquire context + */ +void drm_modeset_acquire_fini(struct drm_modeset_acquire_ctx *ctx) +{ + ww_acquire_fini(&ctx->ww_ctx); +} +EXPORT_SYMBOL(drm_modeset_acquire_fini); + +/** + * drm_modeset_drop_locks - drop all locks + * @ctx: the acquire context + * + * Drop all locks currently held against this acquire context. + */ +void drm_modeset_drop_locks(struct drm_modeset_acquire_ctx *ctx) +{ + WARN_ON(ctx->contended); + while (!list_empty(&ctx->locked)) { + struct drm_modeset_lock *lock; + + lock = list_first_entry(&ctx->locked, + struct drm_modeset_lock, head); + + drm_modeset_unlock(lock); + } +} +EXPORT_SYMBOL(drm_modeset_drop_locks); + +static inline int modeset_lock(struct drm_modeset_lock *lock, + struct drm_modeset_acquire_ctx *ctx, + bool interruptible, bool slow) +{ + int ret; + + WARN_ON(ctx->contended); + + if (interruptible && slow) { + ret = ww_mutex_lock_slow_interruptible(&lock->mutex, &ctx->ww_ctx); + } else if (interruptible) { + ret = ww_mutex_lock_interruptible(&lock->mutex, &ctx->ww_ctx); + } else if (slow) { + ww_mutex_lock_slow(&lock->mutex, &ctx->ww_ctx); + ret = 0; + } else { + ret = ww_mutex_lock(&lock->mutex, &ctx->ww_ctx); + } + if (!ret) { + WARN_ON(!list_empty(&lock->head)); + list_add(&lock->head, &ctx->locked); + } else if (ret == -EALREADY) { + /* we already hold the lock.. this is fine. For atomic + * we will need to be able to drm_modeset_lock() things + * without having to keep track of what is already locked + * or not. + */ + ret = 0; + } else if (ret == -EDEADLK) { + ctx->contended = lock; + } + + return ret; +} + +static int modeset_backoff(struct drm_modeset_acquire_ctx *ctx, + bool interruptible) +{ + struct drm_modeset_lock *contended = ctx->contended; + + ctx->contended = NULL; + + if (WARN_ON(!contended)) + return 0; + + drm_modeset_drop_locks(ctx); + + return modeset_lock(contended, ctx, interruptible, true); +} + +/** + * drm_modeset_backoff - deadlock avoidance backoff + * @ctx: the acquire context + * + * If deadlock is detected (ie. drm_modeset_lock() returns -EDEADLK), + * you must call this function to drop all currently held locks and + * block until the contended lock becomes available. + */ +void drm_modeset_backoff(struct drm_modeset_acquire_ctx *ctx) +{ + modeset_backoff(ctx, false); +} +EXPORT_SYMBOL(drm_modeset_backoff); + +/** + * drm_modeset_backoff_interruptible - deadlock avoidance backoff + * @ctx: the acquire context + * + * Interruptible version of drm_modeset_backoff() + */ +int drm_modeset_backoff_interruptible(struct drm_modeset_acquire_ctx *ctx) +{ + return modeset_backoff(ctx, true); +} +EXPORT_SYMBOL(drm_modeset_backoff_interruptible); + +/** + * drm_modeset_lock - take modeset lock + * @lock: lock to take + * @ctx: acquire ctx + * + * If ctx is not NULL, then its ww acquire context is used and the + * lock will be tracked by the context and can be released by calling + * drm_modeset_drop_locks(). If -EDEADLK is returned, this means a + * deadlock scenario has been detected and it is an error to attempt + * to take any more locks without first calling drm_modeset_backoff(). + */ +int drm_modeset_lock(struct drm_modeset_lock *lock, + struct drm_modeset_acquire_ctx *ctx) +{ + if (ctx) + return modeset_lock(lock, ctx, false, false); + + ww_mutex_lock(&lock->mutex, NULL); + return 0; +} +EXPORT_SYMBOL(drm_modeset_lock); + +/** + * drm_modeset_lock_interruptible - take modeset lock + * @lock: lock to take + * @ctx: acquire ctx + * + * Interruptible version of drm_modeset_lock() + */ +int drm_modeset_lock_interruptible(struct drm_modeset_lock *lock, + struct drm_modeset_acquire_ctx *ctx) +{ + if (ctx) + return modeset_lock(lock, ctx, true, false); + + return ww_mutex_lock_interruptible(&lock->mutex, NULL); +} +EXPORT_SYMBOL(drm_modeset_lock_interruptible); + +/** + * drm_modeset_unlock - drop modeset lock + * @lock: lock to release + */ +void drm_modeset_unlock(struct drm_modeset_lock *lock) +{ + list_del_init(&lock->head); + ww_mutex_unlock(&lock->mutex); +} +EXPORT_SYMBOL(drm_modeset_unlock); + +/* Temporary.. until we have sufficiently fine grained locking, there + * are a couple scenarios where it is convenient to grab all crtc locks. + * It is planned to remove this: + */ +int drm_modeset_lock_all_crtcs(struct drm_device *dev, + struct drm_modeset_acquire_ctx *ctx) +{ + struct drm_mode_config *config = &dev->mode_config; + struct drm_crtc *crtc; + int ret = 0; + + list_for_each_entry(crtc, &config->crtc_list, head) { + ret = drm_modeset_lock(&crtc->mutex, ctx); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL(drm_modeset_lock_all_crtcs); diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index f3e0a23abf4e..1b15643b4586 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -60,7 +60,7 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc, * need to grab the connection_mutex here to be able to make these * checks. */ - WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); list_for_each_entry(connector, &dev->mode_config.connector_list, head) if (connector->encoder && connector->encoder->crtc == crtc) { diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 1fc91df58296..5a045d3bd77e 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -630,6 +630,7 @@ intel_crt_detect(struct drm_connector *connector, bool force) enum intel_display_power_domain power_domain; enum drm_connector_status status; struct intel_load_detect_pipe tmp; + struct drm_modeset_acquire_ctx ctx; intel_runtime_pm_get(dev_priv); @@ -673,12 +674,12 @@ intel_crt_detect(struct drm_connector *connector, bool force) } /* for pre-945g platforms use load detect */ - if (intel_get_load_detect_pipe(connector, NULL, &tmp)) { + if (intel_get_load_detect_pipe(connector, NULL, &tmp, &ctx)) { if (intel_crt_detect_ddc(connector)) status = connector_status_connected; else status = intel_crt_load_detect(crt); - intel_release_load_detect_pipe(connector, &tmp); + intel_release_load_detect_pipe(connector, &tmp, &ctx); } else status = connector_status_unknown; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c2976ade823f..1ce4ad4626e4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2576,7 +2576,7 @@ void intel_display_handle_reset(struct drm_device *dev) for_each_crtc(dev, crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); /* * FIXME: Once we have proper support for primary planes (and * disabling them without disabling the entire crtc) allow again @@ -2587,7 +2587,7 @@ void intel_display_handle_reset(struct drm_device *dev) crtc->primary->fb, crtc->x, crtc->y); - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); } } @@ -8307,7 +8307,8 @@ mode_fits_in_fbdev(struct drm_device *dev, bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_display_mode *mode, - struct intel_load_detect_pipe *old) + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx) { struct intel_crtc *intel_crtc; struct intel_encoder *intel_encoder = @@ -8317,13 +8318,19 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_framebuffer *fb; - int i = -1; + struct drm_mode_config *config = &dev->mode_config; + int ret, i = -1; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, connector->name, encoder->base.id, encoder->name); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_acquire_init(ctx, 0); + +retry: + ret = drm_modeset_lock(&config->connection_mutex, ctx); + if (ret) + goto fail_unlock; /* * Algorithm gets a little messy: @@ -8339,7 +8346,9 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, if (encoder->crtc) { crtc = encoder->crtc; - mutex_lock(&crtc->mutex); + ret = drm_modeset_lock(&crtc->mutex, ctx); + if (ret) + goto fail_unlock; old->dpms_mode = connector->dpms; old->load_detect_temp = false; @@ -8367,10 +8376,12 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); - goto fail_unlock_connector; + goto fail_unlock; } - mutex_lock(&crtc->mutex); + ret = drm_modeset_lock(&crtc->mutex, ctx); + if (ret) + goto fail_unlock; intel_encoder->new_crtc = to_intel_crtc(crtc); to_intel_connector(connector)->new_encoder = intel_encoder; @@ -8420,15 +8431,21 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, intel_crtc->new_config = &intel_crtc->config; else intel_crtc->new_config = NULL; - mutex_unlock(&crtc->mutex); -fail_unlock_connector: - mutex_unlock(&dev->mode_config.connection_mutex); +fail_unlock: + if (ret == -EDEADLK) { + drm_modeset_backoff(ctx); + goto retry; + } + + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); return false; } void intel_release_load_detect_pipe(struct drm_connector *connector, - struct intel_load_detect_pipe *old) + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx) { struct intel_encoder *intel_encoder = intel_attached_encoder(connector); @@ -8452,8 +8469,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, drm_framebuffer_unreference(old->release_fb); } - mutex_unlock(&crtc->mutex); - mutex_unlock(&connector->dev->mode_config.connection_mutex); + goto unlock; return; } @@ -8461,8 +8477,9 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, if (old->dpms_mode != DRM_MODE_DPMS_ON) connector->funcs->dpms(connector, old->dpms_mode); - mutex_unlock(&crtc->mutex); - mutex_unlock(&connector->dev->mode_config.connection_mutex); +unlock: + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); } static int i9xx_pll_refclk(struct drm_device *dev, @@ -10995,7 +11012,7 @@ enum pipe intel_get_pipe_from_connector(struct intel_connector *connector) struct drm_encoder *encoder = connector->base.encoder; struct drm_device *dev = connector->base.dev; - WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); if (!encoder) return INVALID_PIPE; @@ -11805,6 +11822,7 @@ static void intel_enable_pipe_a(struct drm_device *dev) struct intel_connector *connector; struct drm_connector *crt = NULL; struct intel_load_detect_pipe load_detect_temp; + struct drm_modeset_acquire_ctx ctx; /* We can't just switch on the pipe A, we need to set things up with a * proper mode and output configuration. As a gross hack, enable pipe A @@ -11821,8 +11839,8 @@ static void intel_enable_pipe_a(struct drm_device *dev) if (!crt) return; - if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp)) - intel_release_load_detect_pipe(crt, &load_detect_temp); + if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, &ctx)) + intel_release_load_detect_pipe(crt, &load_detect_temp, &ctx); } diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index d01bb430b5bc..2d5d9b010073 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1154,7 +1154,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) u32 pp; u32 pp_stat_reg, pp_ctrl_reg; - WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); if (!intel_dp->want_panel_vdd && edp_have_panel_vdd(intel_dp)) { struct intel_digital_port *intel_dig_port = @@ -1191,9 +1191,9 @@ static void edp_panel_vdd_work(struct work_struct *__work) struct intel_dp, panel_vdd_work); struct drm_device *dev = intel_dp_to_dev(intel_dp); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) @@ -3666,9 +3666,9 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder) drm_encoder_cleanup(encoder); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } kfree(intel_dig_port); } @@ -4247,9 +4247,9 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, drm_dp_aux_unregister(&intel_dp->aux); if (is_edp(intel_dp)) { cancel_delayed_work_sync(&intel_dp->panel_vdd_work); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); edp_panel_vdd_off_sync(intel_dp); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); } drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f1d5897c96cd..0de04983501e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -748,9 +748,11 @@ void vlv_wait_port_ready(struct drm_i915_private *dev_priv, struct intel_digital_port *dport); bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_display_mode *mode, - struct intel_load_detect_pipe *old); + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx); void intel_release_load_detect_pipe(struct drm_connector *connector, - struct intel_load_detect_pipe *old); + struct intel_load_detect_pipe *old, + struct drm_modeset_acquire_ctx *ctx); int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, struct intel_engine_cs *pipelined); diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index b812e9d39f38..2e2c71fcc9ed 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -410,7 +410,7 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) if (bclp > 255) return ASLC_BACKLIGHT_FAILED; - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); /* * Update backlight on all connectors that support backlight (usually @@ -421,7 +421,7 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) intel_panel_set_backlight(intel_connector, bclp, 255); iowrite32(DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID, &asle->cblv); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); return 0; diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index e97ea33e0117..0396d1312b5c 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -688,7 +688,7 @@ static int intel_overlay_do_put_image(struct intel_overlay *overlay, u32 swidth, swidthsw, sheight, ostride; BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - BUG_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + BUG_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); BUG_ON(!overlay); ret = intel_overlay_release_old_vid(overlay); @@ -793,7 +793,7 @@ int intel_overlay_switch_off(struct intel_overlay *overlay) int ret; BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - BUG_ON(!mutex_is_locked(&dev->mode_config.connection_mutex)); + BUG_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); ret = intel_overlay_recover_from_interrupt(overlay); if (ret != 0) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index d4d415665475..2e1338a5d488 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -876,12 +876,12 @@ static int intel_backlight_device_update_status(struct backlight_device *bd) struct intel_connector *connector = bl_get_data(bd); struct drm_device *dev = connector->base.dev; - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); DRM_DEBUG_KMS("updating intel_backlight, brightness=%d/%d\n", bd->props.brightness, bd->props.max_brightness); intel_panel_set_backlight(connector, bd->props.brightness, bd->props.max_brightness); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); return 0; } @@ -893,9 +893,9 @@ static int intel_backlight_device_get_brightness(struct backlight_device *bd) int ret; intel_runtime_pm_get(dev_priv); - mutex_lock(&dev->mode_config.connection_mutex); + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); ret = intel_panel_get_backlight(connector); - mutex_unlock(&dev->mode_config.connection_mutex); + drm_modeset_unlock(&dev->mode_config.connection_mutex); intel_runtime_pm_put(dev_priv); return ret; diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d6acd6bd0bf0..1b66ddcdfb33 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -55,7 +55,7 @@ static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl int scanline, min, max, vblank_start; DEFINE_WAIT(wait); - WARN_ON(!mutex_is_locked(&crtc->base.mutex)); + WARN_ON(!drm_modeset_is_locked(&crtc->base.mutex)); vblank_start = mode->crtc_vblank_start; if (mode->flags & DRM_MODE_FLAG_INTERLACE) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 25850a86d70c..67c6c9a2eb1c 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1321,10 +1321,11 @@ intel_tv_detect(struct drm_connector *connector, bool force) if (force) { struct intel_load_detect_pipe tmp; + struct drm_modeset_acquire_ctx ctx; - if (intel_get_load_detect_pipe(connector, &mode, &tmp)) { + if (intel_get_load_detect_pipe(connector, &mode, &tmp, &ctx)) { type = intel_tv_detect_type(intel_tv, connector); - intel_release_load_detect_pipe(connector, &tmp); + intel_release_load_detect_pipe(connector, &tmp, &ctx); } else return connector_status_unknown; } else diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c index e3c47a8005ff..2d28dc337cfb 100644 --- a/drivers/gpu/drm/omapdrm/omap_crtc.c +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -319,13 +319,13 @@ static void page_flip_worker(struct work_struct *work) struct drm_display_mode *mode = &crtc->mode; struct drm_gem_object *bo; - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); omap_plane_mode_set(omap_crtc->plane, crtc, crtc->primary->fb, 0, 0, mode->hdisplay, mode->vdisplay, crtc->x << 16, crtc->y << 16, mode->hdisplay << 16, mode->vdisplay << 16, vblank_cb, crtc); - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); bo = omap_framebuffer_bo(crtc->primary->fb, 0); drm_gem_object_unreference_unlocked(bo); @@ -465,7 +465,7 @@ static void apply_worker(struct work_struct *work) * the callbacks and list modification all serialized * with respect to modesetting ioctls from userspace. */ - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); dispc_runtime_get(); /* @@ -510,7 +510,7 @@ static void apply_worker(struct work_struct *work) out: dispc_runtime_put(); - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); } int omap_crtc_apply(struct drm_crtc *crtc, @@ -518,7 +518,7 @@ int omap_crtc_apply(struct drm_crtc *crtc, { struct omap_crtc *omap_crtc = to_omap_crtc(crtc); - WARN_ON(!mutex_is_locked(&crtc->mutex)); + WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); /* no need to queue it again if it is already queued: */ if (apply->queued) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index e7199b454ca0..8f3edc4710f2 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -187,7 +187,7 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, * can do this since the caller in the drm core doesn't check anything * which is protected by any looks. */ - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); drm_modeset_lock_all(dev_priv->dev); /* A lot of the code assumes this */ @@ -252,7 +252,7 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, ret = 0; out: drm_modeset_unlock_all(dev_priv->dev); - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); return ret; } @@ -273,7 +273,7 @@ int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) * can do this since the caller in the drm core doesn't check anything * which is protected by any looks. */ - mutex_unlock(&crtc->mutex); + drm_modeset_unlock(&crtc->mutex); drm_modeset_lock_all(dev_priv->dev); vmw_cursor_update_position(dev_priv, shown, @@ -281,7 +281,7 @@ int vmw_du_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) du->cursor_y + du->hotspot_y); drm_modeset_unlock_all(dev_priv->dev); - mutex_lock(&crtc->mutex); + drm_modeset_lock(&crtc->mutex, NULL); return 0; } diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 76ccaabd0418..475ca5cf3c20 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1186,11 +1186,6 @@ static inline int drm_device_is_unplugged(struct drm_device *dev) return ret; } -static inline bool drm_modeset_is_locked(struct drm_device *dev) -{ - return mutex_is_locked(&dev->mode_config.mutex); -} - static inline bool drm_is_render_client(const struct drm_file *file_priv) { return file_priv->minor->type == DRM_MINOR_RENDER; diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 6c295df7b0df..a7fac5686915 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -33,6 +33,7 @@ #include #include #include +#include struct drm_device; struct drm_mode_set; @@ -205,6 +206,10 @@ struct drm_property { struct list_head enum_blob_list; }; +void drm_modeset_lock_all(struct drm_device *dev); +void drm_modeset_unlock_all(struct drm_device *dev); +void drm_warn_on_modeset_not_all_locked(struct drm_device *dev); + struct drm_crtc; struct drm_connector; struct drm_encoder; @@ -280,6 +285,7 @@ struct drm_crtc_funcs { * drm_crtc - central CRTC control structure * @dev: parent DRM device * @head: list management + * @mutex: per-CRTC locking * @base: base KMS object for ID tracking etc. * @primary: primary plane for this CRTC * @cursor: cursor plane for this CRTC @@ -314,7 +320,7 @@ struct drm_crtc { * state, ...) and a write lock for everything which can be update * without a full modeset (fb, cursor data, ...) */ - struct mutex mutex; + struct drm_modeset_lock mutex; struct drm_mode_object base; @@ -738,7 +744,8 @@ struct drm_mode_group { */ struct drm_mode_config { struct mutex mutex; /* protects configuration (mode lists etc.) */ - struct mutex connection_mutex; /* protects connector->encoder and encoder->crtc links */ + struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */ + struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */ struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ @@ -839,10 +846,6 @@ struct drm_prop_enum_list { char *name; }; -extern void drm_modeset_lock_all(struct drm_device *dev); -extern void drm_modeset_unlock_all(struct drm_device *dev); -extern void drm_warn_on_modeset_not_all_locked(struct drm_device *dev); - extern int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h new file mode 100644 index 000000000000..402aa7a6a058 --- /dev/null +++ b/include/drm/drm_modeset_lock.h @@ -0,0 +1,126 @@ +/* + * Copyright (C) 2014 Red Hat + * Author: Rob Clark + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_MODESET_LOCK_H_ +#define DRM_MODESET_LOCK_H_ + +#include + +struct drm_modeset_lock; + +/** + * drm_modeset_acquire_ctx - locking context (see ww_acquire_ctx) + * @ww_ctx: base acquire ctx + * @contended: used internally for -EDEADLK handling + * @locked: list of held locks + * + * Each thread competing for a set of locks must use one acquire + * ctx. And if any lock fxn returns -EDEADLK, it must backoff and + * retry. + */ +struct drm_modeset_acquire_ctx { + + struct ww_acquire_ctx ww_ctx; + + /** + * Contended lock: if a lock is contended you should only call + * drm_modeset_backoff() which drops locks and slow-locks the + * contended lock. + */ + struct drm_modeset_lock *contended; + + /** + * list of held locks (drm_modeset_lock) + */ + struct list_head locked; +}; + +/** + * drm_modeset_lock - used for locking modeset resources. + * @mutex: resource locking + * @head: used to hold it's place on state->locked list when + * part of an atomic update + * + * Used for locking CRTCs and other modeset resources. + */ +struct drm_modeset_lock { + /** + * modeset lock + */ + struct ww_mutex mutex; + + /** + * Resources that are locked as part of an atomic update are added + * to a list (so we know what to unlock at the end). + */ + struct list_head head; +}; + +extern struct ww_class crtc_ww_class; + +void drm_modeset_acquire_init(struct drm_modeset_acquire_ctx *ctx, + uint32_t flags); +void drm_modeset_acquire_fini(struct drm_modeset_acquire_ctx *ctx); +void drm_modeset_drop_locks(struct drm_modeset_acquire_ctx *ctx); +void drm_modeset_backoff(struct drm_modeset_acquire_ctx *ctx); +int drm_modeset_backoff_interruptible(struct drm_modeset_acquire_ctx *ctx); + +/** + * drm_modeset_lock_init - initialize lock + * @lock: lock to init + */ +static inline void drm_modeset_lock_init(struct drm_modeset_lock *lock) +{ + ww_mutex_init(&lock->mutex, &crtc_ww_class); + INIT_LIST_HEAD(&lock->head); +} + +/** + * drm_modeset_lock_fini - cleanup lock + * @lock: lock to cleanup + */ +static inline void drm_modeset_lock_fini(struct drm_modeset_lock *lock) +{ + WARN_ON(!list_empty(&lock->head)); +} + +/** + * drm_modeset_is_locked - equivalent to mutex_is_locked() + * @lock: lock to check + */ +static inline bool drm_modeset_is_locked(struct drm_modeset_lock *lock) +{ + return ww_mutex_is_locked(&lock->mutex); +} + +int drm_modeset_lock(struct drm_modeset_lock *lock, + struct drm_modeset_acquire_ctx *ctx); +int drm_modeset_lock_interruptible(struct drm_modeset_lock *lock, + struct drm_modeset_acquire_ctx *ctx); +void drm_modeset_unlock(struct drm_modeset_lock *lock); + +struct drm_device; +int drm_modeset_lock_all_crtcs(struct drm_device *dev, + struct drm_modeset_acquire_ctx *ctx); + +#endif /* DRM_MODESET_LOCK_H_ */ -- cgit v1.2.3 From 9161f5409798d52aa8598ff12575fde2327bed84 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Wed, 28 May 2014 21:36:43 -0700 Subject: locking/mutexes: Documentation update/rewrite Our mutexes have gone a long ways since the original implementation back in 2005/2006. However, the mutex-design.txt document is still stuck in the past, to the point where most of the information there is practically useless and, more important, simply incorrect. This patch pretty much rewrites it to resemble what we have nowadays. Since regular semaphores are almost much extinct in the kernel (most users now rely on mutexes or rwsems), it no longer makes sense to have such a close comparison, which was copied from most of the cover letter when Ingo introduced the generic mutex subsystem. Note that ww_mutexes are intentionally left out, leaving things as generic as possible. Signed-off-by: Davidlohr Bueso Cc: tim.c.chen@linux.intel.com Cc: paulmck@linux.vnet.ibm.com Cc: waiman.long@hp.com Cc: jason.low2@hp.com Cc: aswin@hp.com Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1401338203.2618.11.camel@buesod1.americas.hpqcorp.net Signed-off-by: Ingo Molnar --- Documentation/mutex-design.txt | 252 ++++++++++++++++++++++------------------- 1 file changed, 135 insertions(+), 117 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt index 1dfe62c3641d..ee231ed09ec6 100644 --- a/Documentation/mutex-design.txt +++ b/Documentation/mutex-design.txt @@ -1,139 +1,157 @@ Generic Mutex Subsystem started by Ingo Molnar +updated by Davidlohr Bueso - "Why on earth do we need a new mutex subsystem, and what's wrong - with semaphores?" +What are mutexes? +----------------- -firstly, there's nothing wrong with semaphores. But if the simpler -mutex semantics are sufficient for your code, then there are a couple -of advantages of mutexes: +In the Linux kernel, mutexes refer to a particular locking primitive +that enforces serialization on shared memory systems, and not only to +the generic term referring to 'mutual exclusion' found in academia +or similar theoretical text books. Mutexes are sleeping locks which +behave similarly to binary semaphores, and were introduced in 2006[1] +as an alternative to these. This new data structure provided a number +of advantages, including simpler interfaces, and at that time smaller +code (see Disadvantages). - - 'struct mutex' is smaller on most architectures: E.g. on x86, - 'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes. - A smaller structure size means less RAM footprint, and better - CPU-cache utilization. +[1] http://lwn.net/Articles/164802/ - - tighter code. On x86 i get the following .text sizes when - switching all mutex-alike semaphores in the kernel to the mutex - subsystem: +Implementation +-------------- - text data bss dec hex filename - 3280380 868188 396860 4545428 455b94 vmlinux-semaphore - 3255329 865296 396732 4517357 44eded vmlinux-mutex +Mutexes are represented by 'struct mutex', defined in include/linux/mutex.h +and implemented in kernel/locking/mutex.c. These locks use a three +state atomic counter (->count) to represent the different possible +transitions that can occur during the lifetime of a lock: - that's 25051 bytes of code saved, or a 0.76% win - off the hottest - codepaths of the kernel. (The .data savings are 2892 bytes, or 0.33%) - Smaller code means better icache footprint, which is one of the - major optimization goals in the Linux kernel currently. + 1: unlocked + 0: locked, no waiters + negative: locked, with potential waiters - - the mutex subsystem is slightly faster and has better scalability for - contended workloads. On an 8-way x86 system, running a mutex-based - kernel and testing creat+unlink+close (of separate, per-task files) - in /tmp with 16 parallel tasks, the average number of ops/sec is: +In its most basic form it also includes a wait-queue and a spinlock +that serializes access to it. CONFIG_SMP systems can also include +a pointer to the lock task owner (->owner) as well as a spinner MCS +lock (->osq), both described below in (ii). - Semaphores: Mutexes: +When acquiring a mutex, there are three possible paths that can be +taken, depending on the state of the lock: - $ ./test-mutex V 16 10 $ ./test-mutex V 16 10 - 8 CPUs, running 16 tasks. 8 CPUs, running 16 tasks. - checking VFS performance. checking VFS performance. - avg loops/sec: 34713 avg loops/sec: 84153 - CPU utilization: 63% CPU utilization: 22% +(i) fastpath: tries to atomically acquire the lock by decrementing the + counter. If it was already taken by another task it goes to the next + possible path. This logic is architecture specific. On x86-64, the + locking fastpath is 2 instructions: - i.e. in this workload, the mutex based kernel was 2.4 times faster - than the semaphore based kernel, _and_ it also had 2.8 times less CPU - utilization. (In terms of 'ops per CPU cycle', the semaphore kernel - performed 551 ops/sec per 1% of CPU time used, while the mutex kernel - performed 3825 ops/sec per 1% of CPU time used - it was 6.9 times - more efficient.) - - the scalability difference is visible even on a 2-way P4 HT box: - - Semaphores: Mutexes: - - $ ./test-mutex V 16 10 $ ./test-mutex V 16 10 - 4 CPUs, running 16 tasks. 8 CPUs, running 16 tasks. - checking VFS performance. checking VFS performance. - avg loops/sec: 127659 avg loops/sec: 181082 - CPU utilization: 100% CPU utilization: 34% - - (the straight performance advantage of mutexes is 41%, the per-cycle - efficiency of mutexes is 4.1 times better.) - - - there are no fastpath tradeoffs, the mutex fastpath is just as tight - as the semaphore fastpath. On x86, the locking fastpath is 2 - instructions: - - c0377ccb : - c0377ccb: f0 ff 08 lock decl (%eax) - c0377cce: 78 0e js c0377cde <.text..lock.mutex> - c0377cd0: c3 ret + 0000000000000e10 : + e21: f0 ff 0b lock decl (%rbx) + e24: 79 08 jns e2e the unlocking fastpath is equally tight: - c0377cd1 : - c0377cd1: f0 ff 00 lock incl (%eax) - c0377cd4: 7e 0f jle c0377ce5 <.text..lock.mutex+0x7> - c0377cd6: c3 ret - - - 'struct mutex' semantics are well-defined and are enforced if - CONFIG_DEBUG_MUTEXES is turned on. Semaphores on the other hand have - virtually no debugging code or instrumentation. The mutex subsystem - checks and enforces the following rules: - - * - only one task can hold the mutex at a time - * - only the owner can unlock the mutex - * - multiple unlocks are not permitted - * - recursive locking is not permitted - * - a mutex object must be initialized via the API - * - a mutex object must not be initialized via memset or copying - * - task may not exit with mutex held - * - memory areas where held locks reside must not be freed - * - held mutexes must not be reinitialized - * - mutexes may not be used in hardware or software interrupt - * contexts such as tasklets and timers - - furthermore, there are also convenience features in the debugging - code: - - * - uses symbolic names of mutexes, whenever they are printed in debug output - * - point-of-acquire tracking, symbolic lookup of function names - * - list of all locks held in the system, printout of them - * - owner tracking - * - detects self-recursing locks and prints out all relevant info - * - detects multi-task circular deadlocks and prints out all affected - * locks and tasks (and only those tasks) + 0000000000000bc0 : + bc8: f0 ff 07 lock incl (%rdi) + bcb: 7f 0a jg bd7 + + +(ii) midpath: aka optimistic spinning, tries to spin for acquisition + while the lock owner is running and there are no other tasks ready + to run that have higher priority (need_resched). The rationale is + that if the lock owner is running, it is likely to release the lock + soon. The mutex spinners are queued up using MCS lock so that only + one spinner can compete for the mutex. + + The MCS lock (proposed by Mellor-Crummey and Scott) is a simple spinlock + with the desirable properties of being fair and with each cpu trying + to acquire the lock spinning on a local variable. It avoids expensive + cacheline bouncing that common test-and-set spinlock implementations + incur. An MCS-like lock is specially tailored for optimistic spinning + for sleeping lock implementation. An important feature of the customized + MCS lock is that it has the extra property that spinners are able to exit + the MCS spinlock queue when they need to reschedule. This further helps + avoid situations where MCS spinners that need to reschedule would continue + waiting to spin on mutex owner, only to go directly to slowpath upon + obtaining the MCS lock. + + +(iii) slowpath: last resort, if the lock is still unable to be acquired, + the task is added to the wait-queue and sleeps until woken up by the + unlock path. Under normal circumstances it blocks as TASK_UNINTERRUPTIBLE. + +While formally kernel mutexes are sleepable locks, it is path (ii) that +makes them more practically a hybrid type. By simply not interrupting a +task and busy-waiting for a few cycles instead of immediately sleeping, +the performance of this lock has been seen to significantly improve a +number of workloads. Note that this technique is also used for rw-semaphores. + +Semantics +--------- + +The mutex subsystem checks and enforces the following rules: + + - Only one task can hold the mutex at a time. + - Only the owner can unlock the mutex. + - Multiple unlocks are not permitted. + - Recursive locking/unlocking is not permitted. + - A mutex must only be initialized via the API (see below). + - A task may not exit with a mutex held. + - Memory areas where held locks reside must not be freed. + - Held mutexes must not be reinitialized. + - Mutexes may not be used in hardware or software interrupt + contexts such as tasklets and timers. + +These semantics are fully enforced when CONFIG DEBUG_MUTEXES is enabled. +In addition, the mutex debugging code also implements a number of other +features that make lock debugging easier and faster: + + - Uses symbolic names of mutexes, whenever they are printed + in debug output. + - Point-of-acquire tracking, symbolic lookup of function names, + list of all locks held in the system, printout of them. + - Owner tracking. + - Detects self-recursing locks and prints out all relevant info. + - Detects multi-task circular deadlocks and prints out all affected + locks and tasks (and only those tasks). + + +Interfaces +---------- +Statically define the mutex: + DEFINE_MUTEX(name); + +Dynamically initialize the mutex: + mutex_init(mutex); + +Acquire the mutex, uninterruptible: + void mutex_lock(struct mutex *lock); + void mutex_lock_nested(struct mutex *lock, unsigned int subclass); + int mutex_trylock(struct mutex *lock); + +Acquire the mutex, interruptible: + int mutex_lock_interruptible_nested(struct mutex *lock, + unsigned int subclass); + int mutex_lock_interruptible(struct mutex *lock); + +Acquire the mutex, interruptible, if dec to 0: + int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock); + +Unlock the mutex: + void mutex_unlock(struct mutex *lock); + +Test if the mutex is taken: + int mutex_is_locked(struct mutex *lock); Disadvantages ------------- -The stricter mutex API means you cannot use mutexes the same way you -can use semaphores: e.g. they cannot be used from an interrupt context, -nor can they be unlocked from a different context that which acquired -it. [ I'm not aware of any other (e.g. performance) disadvantages from -using mutexes at the moment, please let me know if you find any. ] - -Implementation of mutexes -------------------------- - -'struct mutex' is the new mutex type, defined in include/linux/mutex.h and -implemented in kernel/locking/mutex.c. It is a counter-based mutex with a -spinlock and a wait-list. The counter has 3 states: 1 for "unlocked", 0 for -"locked" and negative numbers (usually -1) for "locked, potential waiters -queued". - -the APIs of 'struct mutex' have been streamlined: - - DEFINE_MUTEX(name); +Unlike its original design and purpose, 'struct mutex' is larger than +most locks in the kernel. E.g: on x86-64 it is 40 bytes, almost twice +as large as 'struct semaphore' (24 bytes) and 8 bytes shy of the +'struct rw_semaphore' variant. Larger structure sizes mean more CPU +cache and memory footprint. - mutex_init(mutex); +When to use mutexes +------------------- - void mutex_lock(struct mutex *lock); - int mutex_lock_interruptible(struct mutex *lock); - int mutex_trylock(struct mutex *lock); - void mutex_unlock(struct mutex *lock); - int mutex_is_locked(struct mutex *lock); - void mutex_lock_nested(struct mutex *lock, unsigned int subclass); - int mutex_lock_interruptible_nested(struct mutex *lock, - unsigned int subclass); - int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock); +Unless the strict semantics of mutexes are unsuitable and/or the critical +region prevents the lock from being shared, always prefer them to any other +locking primitive. -- cgit v1.2.3 From fff5de45ef82f12918d6558a07cdf27cdce7e3d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 15 May 2014 12:25:47 +0200 Subject: drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels The EDT ETM0700G0DH6 and ET070080DH6 are 7" 800x480 panels, which can be supported by the simple panel driver. Signed-off-by: Philipp Zabel Signed-off-by: Thierry Reding --- .../devicetree/bindings/panel/edt,et070080dh6.txt | 10 ++++++++ .../devicetree/bindings/panel/edt,etm0700g0dh6.txt | 10 ++++++++ drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++ 3 files changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/edt,et070080dh6.txt create mode 100644 Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt b/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt new file mode 100644 index 000000000000..20cb38e836e4 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt @@ -0,0 +1,10 @@ +Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "edt,et070080dh6" + +This panel is the same as ETM0700G0DH6 except for the touchscreen. +ET070080DH6 is the model with resistive touch. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt b/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt new file mode 100644 index 000000000000..ee4b18053e40 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt @@ -0,0 +1,10 @@ +Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "edt,etm0700g0dh6" + +This panel is the same as ET070080DH6 except for the touchscreen. +ETM0700G0DH6 is the model with capacitive multitouch. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 309f29e9234a..72da48cce7e4 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -328,6 +328,29 @@ static const struct panel_desc chunghwa_claa101wb01 = { }, }; +static const struct drm_display_mode edt_etm0700g0dh6_mode = { + .clock = 33260, + .hdisplay = 800, + .hsync_start = 800 + 40, + .hsync_end = 800 + 40 + 128, + .htotal = 800 + 40 + 128 + 88, + .vdisplay = 480, + .vsync_start = 480 + 10, + .vsync_end = 480 + 10 + 2, + .vtotal = 480 + 10 + 2 + 33, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, +}; + +static const struct panel_desc edt_etm0700g0dh6 = { + .modes = &edt_etm0700g0dh6_mode, + .num_modes = 1, + .size = { + .width = 152, + .height = 91, + }, +}; + static const struct drm_display_mode lg_lp129qe_mode = { .clock = 285250, .hdisplay = 2560, @@ -382,6 +405,12 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "chunghwa,claa101wb01", .data = &chunghwa_claa101wb01 + }, { + .compatible = "edt,et070080dh6", + .data = &edt_etm0700g0dh6, + }, { + .compatible = "edt,etm0700g0dh6", + .data = &edt_etm0700g0dh6, }, { .compatible = "lg,lp129qe", .data = &lg_lp129qe, -- cgit v1.2.3 From 26ab0065794de0317776e97e58364ac30b33f6b2 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Thu, 15 May 2014 11:38:45 +0200 Subject: drm/panel: add support for EDT ET057090DHU panel This panel is sold by Toradex for Colibri T20/T30 and Apalis T30 evaluation kits. Signed-off-by: Stefan Agner Signed-off-by: Thierry Reding --- .../devicetree/bindings/panel/edt,et057090dhu.txt | 7 ++++++ drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++ 2 files changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/edt,et057090dhu.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt b/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt new file mode 100644 index 000000000000..4903d7b1d947 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt @@ -0,0 +1,7 @@ +Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + +Required properties: +- compatible: should be "edt,et057090dhu" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 72da48cce7e4..a0d3cf11ca15 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -328,6 +328,29 @@ static const struct panel_desc chunghwa_claa101wb01 = { }, }; +static const struct drm_display_mode edt_et057090dhu_mode = { + .clock = 25175, + .hdisplay = 640, + .hsync_start = 640 + 16, + .hsync_end = 640 + 16 + 30, + .htotal = 640 + 16 + 30 + 114, + .vdisplay = 480, + .vsync_start = 480 + 10, + .vsync_end = 480 + 10 + 3, + .vtotal = 480 + 10 + 3 + 32, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static const struct panel_desc edt_et057090dhu = { + .modes = &edt_et057090dhu_mode, + .num_modes = 1, + .size = { + .width = 115, + .height = 86, + }, +}; + static const struct drm_display_mode edt_etm0700g0dh6_mode = { .clock = 33260, .hdisplay = 800, @@ -405,6 +428,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "chunghwa,claa101wb01", .data = &chunghwa_claa101wb01 + }, { + .compatible = "edt,et057090dhu", + .data = &edt_et057090dhu, }, { .compatible = "edt,et070080dh6", .data = &edt_etm0700g0dh6, -- cgit v1.2.3 From fb50a116bbbc25c7c11e00e6d10a53b9ec3c38e8 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 28 Feb 2014 16:57:34 +0100 Subject: drm/tegra: hdmi - Add connector supply support Revert commit 18ebc0f404d5 "drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC" and instead add a new supply for the +5V pin on the HDMI connector. The vdd-supply property refers to the regulator that supplies the AVDD_HDMI input on Tegra, rather than the +5V HDMI connector pin. This was never a problem before, because all boards had that pin hooked up to a regulator that was always on. Starting with Dalmore and continuing with Venice2, the +5V pin is controllable via a GPIO. For reasons unknown, the GPIO ended up as the controlling GPIO of the AVDD_HDMI supply in the Dalmore and Venice2 DTS files. But that's not correct. Instead, a separate supply must be introduced so that the +5V pin can be controlled separately from the supplies that feed the HDMI block within Tegra. A new hdmi-supply property is introduced that takes the place of the vdd-supply and vdd-supply is only enabled when HDMI is enabled rather than all the time. Signed-off-by: Thierry Reding --- .../bindings/gpu/nvidia,tegra20-host1x.txt | 1 + drivers/gpu/drm/tegra/hdmi.c | 32 ++++++++++++++++------ 2 files changed, 24 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index efa8b8451f93..f13a6b8263d3 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -136,6 +136,7 @@ of the following host1x client modules: - compatible: "nvidia,tegra-hdmi" - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. + - hdmi-supply: supply for the +5V HDMI connector pin - vdd-supply: regulator for supply voltage - pll-supply: regulator for PLL - clocks: Must contain an entry for each entry in clock-names. diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index 6928015d11a4..8b797913470a 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -42,6 +42,7 @@ struct tegra_hdmi { struct device *dev; bool enabled; + struct regulator *hdmi; struct regulator *vdd; struct regulator *pll; @@ -710,6 +711,12 @@ static int tegra_output_hdmi_enable(struct tegra_output *output) h_back_porch = mode->htotal - mode->hsync_end; h_front_porch = mode->hsync_start - mode->hdisplay; + err = regulator_enable(hdmi->vdd); + if (err < 0) { + dev_err(hdmi->dev, "failed to enable VDD regulator: %d\n", err); + return err; + } + err = regulator_enable(hdmi->pll); if (err < 0) { dev_err(hdmi->dev, "failed to enable PLL regulator: %d\n", err); @@ -950,6 +957,7 @@ static int tegra_output_hdmi_disable(struct tegra_output *output) reset_control_assert(hdmi->rst); clk_disable(hdmi->clk); regulator_disable(hdmi->pll); + regulator_disable(hdmi->vdd); hdmi->enabled = false; @@ -1256,13 +1264,6 @@ static int tegra_hdmi_init(struct host1x_client *client) struct tegra_hdmi *hdmi = host1x_client_to_hdmi(client); int err; - err = regulator_enable(hdmi->vdd); - if (err < 0) { - dev_err(client->dev, "failed to enable VDD regulator: %d\n", - err); - return err; - } - hdmi->output.type = TEGRA_OUTPUT_HDMI; hdmi->output.dev = client->dev; hdmi->output.ops = &hdmi_ops; @@ -1279,6 +1280,13 @@ static int tegra_hdmi_init(struct host1x_client *client) dev_err(client->dev, "debugfs setup failed: %d\n", err); } + err = regulator_enable(hdmi->hdmi); + if (err < 0) { + dev_err(client->dev, "failed to enable HDMI regulator: %d\n", + err); + return err; + } + return 0; } @@ -1287,6 +1295,8 @@ static int tegra_hdmi_exit(struct host1x_client *client) struct tegra_hdmi *hdmi = host1x_client_to_hdmi(client); int err; + regulator_disable(hdmi->hdmi); + if (IS_ENABLED(CONFIG_DEBUG_FS)) { err = tegra_hdmi_debugfs_exit(hdmi); if (err < 0) @@ -1306,8 +1316,6 @@ static int tegra_hdmi_exit(struct host1x_client *client) return err; } - regulator_disable(hdmi->vdd); - return 0; } @@ -1399,6 +1407,12 @@ static int tegra_hdmi_probe(struct platform_device *pdev) return err; } + hdmi->hdmi = devm_regulator_get(&pdev->dev, "hdmi"); + if (IS_ERR(hdmi->hdmi)) { + dev_err(&pdev->dev, "failed to get HDMI regulator\n"); + return PTR_ERR(hdmi->hdmi); + } + hdmi->vdd = devm_regulator_get(&pdev->dev, "vdd"); if (IS_ERR(hdmi->vdd)) { dev_err(&pdev->dev, "failed to get VDD regulator\n"); -- cgit v1.2.3 From 3b077afb3a7d84bffbf6598697a17655933671d2 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 14 Mar 2014 14:07:50 +0100 Subject: drm/tegra: dsi - Implement VDD supply support The DSI controllers are powered by a (typically 1.2V) regulator. Usually this is always on, so there was no need to support enabling or disabling it thus far. But in order not to consume any power when DSI is inactive, give the driver a chance to enable or disable the supply as needed. Signed-off-by: Thierry Reding --- .../devicetree/bindings/gpu/nvidia,tegra20-host1x.txt | 1 + drivers/gpu/drm/tegra/dsi.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index f13a6b8263d3..b48f4ef31d93 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -181,6 +181,7 @@ of the following host1x client modules: See ../reset/reset.txt for details. - reset-names: Must include the following entries: - dsi + - avdd-dsi-supply: phandle of a supply that powers the DSI controller - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying which pads are used by this DSI output and need to be calibrated. See also ../mipi/nvidia,tegra114-mipi.txt. diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c index 5e2bd843dbe2..fbb13ce1ed18 100644 --- a/drivers/gpu/drm/tegra/dsi.c +++ b/drivers/gpu/drm/tegra/dsi.c @@ -14,6 +14,8 @@ #include #include +#include + #include #include @@ -48,6 +50,8 @@ struct tegra_dsi { struct tegra_mipi_device *mipi; struct mipi_dsi_host host; + + struct regulator *vdd; }; static inline struct tegra_dsi * @@ -821,6 +825,18 @@ static int tegra_dsi_probe(struct platform_device *pdev) return err; } + dsi->vdd = devm_regulator_get(&pdev->dev, "avdd-dsi-csi"); + if (IS_ERR(dsi->vdd)) { + dev_err(&pdev->dev, "cannot get VDD supply\n"); + return PTR_ERR(dsi->vdd); + } + + err = regulator_enable(dsi->vdd); + if (err < 0) { + dev_err(&pdev->dev, "cannot enable VDD supply\n"); + return err; + } + err = tegra_dsi_setup_clocks(dsi); if (err < 0) { dev_err(&pdev->dev, "cannot setup clocks\n"); @@ -876,6 +892,7 @@ static int tegra_dsi_remove(struct platform_device *pdev) mipi_dsi_host_unregister(&dsi->host); tegra_mipi_free(dsi->mipi); + regulator_disable(dsi->vdd); clk_disable_unprepare(dsi->clk_parent); clk_disable_unprepare(dsi->clk_lp); clk_disable_unprepare(dsi->clk); -- cgit v1.2.3 From c6a1af8a1621913e2658eaff419bab7028b2c42c Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 19 May 2014 13:39:07 +0200 Subject: drm: Add device registration documentation Describe how devices are registered using the drm_*_init() functions. Adding this to docbook requires a largish set of changes to the comments in drm_{pci,usb,platform}.c since they are doxygen-style rather than proper kernel-doc and therefore mess with the docbook generation. While at it, mark usage of drm_put_dev() as discouraged in favour of calling drm_dev_unregister() and drm_dev_unref() directly. Acked-by: Daniel Vetter Signed-off-by: Thierry Reding --- Documentation/DocBook/drm.tmpl | 10 ++++++ drivers/gpu/drm/drm_pci.c | 80 ++++++++++++++++++++---------------------- drivers/gpu/drm/drm_platform.c | 15 ++++---- drivers/gpu/drm/drm_stub.c | 22 ++++++------ drivers/gpu/drm/drm_usb.c | 20 ++++++++++- 5 files changed, 85 insertions(+), 62 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index efef63717ef6..ba09b6f1e5b3 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -281,6 +281,16 @@ char *date; + + Device Registration + + A number of functions are provided to help with device registration. + The functions deal with PCI, USB and platform devices, respectively. + +!Edrivers/gpu/drm/drm_pci.c +!Edrivers/gpu/drm/drm_usb.c +!Edrivers/gpu/drm/drm_platform.c + Driver Load diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c index d237de36a07a..020cfd934854 100644 --- a/drivers/gpu/drm/drm_pci.c +++ b/drivers/gpu/drm/drm_pci.c @@ -1,17 +1,3 @@ -/* drm_pci.h -- PCI DMA memory management wrappers for DRM -*- linux-c -*- */ -/** - * \file drm_pci.c - * \brief Functions and ioctls to manage PCI memory - * - * \warning These interfaces aren't stable yet. - * - * \todo Implement the remaining ioctl's for the PCI pools. - * \todo The wrappers here are so thin that they would be better off inlined.. - * - * \author José Fonseca - * \author Leif Delgass - */ - /* * Copyright 2003 José Fonseca. * Copyright 2003 Leif Delgass. @@ -42,12 +28,14 @@ #include #include -/**********************************************************************/ -/** \name PCI memory */ -/*@{*/ - /** - * \brief Allocate a PCI consistent memory block, for DMA. + * drm_pci_alloc - Allocate a PCI consistent memory block, for DMA. + * @dev: DRM device + * @size: size of block to allocate + * @align: alignment of block + * + * Return: A handle to the allocated memory block on success or NULL on + * failure. */ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align) { @@ -88,8 +76,8 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali EXPORT_SYMBOL(drm_pci_alloc); -/** - * \brief Free a PCI consistent memory block without freeing its descriptor. +/* + * Free a PCI consistent memory block without freeing its descriptor. * * This function is for internal use in the Linux-specific DRM core code. */ @@ -111,7 +99,9 @@ void __drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah) } /** - * \brief Free a PCI consistent memory block + * drm_pci_free - Free a PCI consistent memory block + * @dev: DRM device + * @dmah: handle to memory block */ void drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah) { @@ -226,17 +216,16 @@ static int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p) } /** - * Get interrupt from bus id. - * - * \param inode device inode. - * \param file_priv DRM file private. - * \param cmd command. - * \param arg user argument, pointing to a drm_irq_busid structure. - * \return zero on success or a negative number on failure. + * drm_irq_by_busid - Get interrupt from bus ID + * @dev: DRM device + * @data: IOCTL parameter pointing to a drm_irq_busid structure + * @file_priv: DRM file private. * * Finds the PCI device with the specified bus id and gets its IRQ number. * This IOCTL is deprecated, and will now return EINVAL for any busid not equal * to that of the device that this DRM instance attached to. + * + * Return: 0 on success or a negative error code on failure. */ int drm_irq_by_busid(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -285,15 +274,16 @@ static struct drm_bus drm_pci_bus = { }; /** - * Register. - * - * \param pdev - PCI device structure - * \param ent entry from the PCI ID table with device type flags - * \return zero on success or a negative number on failure. + * drm_get_pci_dev - Register a PCI device with the DRM subsystem + * @pdev: PCI device + * @ent: entry from the PCI ID table that matches @pdev + * @driver: DRM device driver * * Attempt to gets inter module "drm" information. If we are first * then register the character device and inter module information. * Try and register, if we fail to register, backout previous work. + * + * Return: 0 on success or a negative error code on failure. */ int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent, struct drm_driver *driver) @@ -346,15 +336,14 @@ err_free: EXPORT_SYMBOL(drm_get_pci_dev); /** - * PCI device initialization. Called direct from modules at load time. + * drm_pci_init - Register matching PCI devices with the DRM subsystem + * @driver: DRM device driver + * @pdriver: PCI device driver * - * \return zero on success or a negative number on failure. + * Initializes a drm_device structures, registering the stubs and initializing + * the AGP device. * - * Initializes a drm_device structures,registering the - * stubs and initializing the AGP device. - * - * Expands the \c DRIVER_PREINIT and \c DRIVER_POST_INIT macros before and - * after the initialization for driver customization. + * Return: 0 on success or a negative error code on failure. */ int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver) { @@ -458,7 +447,14 @@ int drm_pci_set_unique(struct drm_device *dev, EXPORT_SYMBOL(drm_pci_init); -/*@}*/ +/** + * drm_pci_exit - Unregister matching PCI devices from the DRM subsystem + * @driver: DRM device driver + * @pdriver: PCI device driver + * + * Unregisters one or more devices matched by a PCI driver from the DRM + * subsystem. + */ void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver) { struct drm_device *dev, *tmp; diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c index 234e0bc1ae51..d5b76f148c12 100644 --- a/drivers/gpu/drm/drm_platform.c +++ b/drivers/gpu/drm/drm_platform.c @@ -106,17 +106,16 @@ static struct drm_bus drm_platform_bus = { }; /** - * Platform device initialization. Called direct from modules. + * drm_platform_init - Register a platform device with the DRM subsystem + * @driver: DRM device driver + * @platform_device: platform device to register * - * \return zero on success or a negative number on failure. - * - * Initializes a drm_device structures,registering the - * stubs + * Registers the specified DRM device driver and platform device with the DRM + * subsystem, initializing a drm_device structure and calling the driver's + * .load() function. * - * Expands the \c DRIVER_PREINIT and \c DRIVER_POST_INIT macros before and - * after the initialization for driver customization. + * Return: 0 on success or a negative error code on failure. */ - int drm_platform_init(struct drm_driver *driver, struct platform_device *platform_device) { DRM_DEBUG("\n"); diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 6d55392376dd..14d16464000a 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -1,16 +1,11 @@ -/** - * \file drm_stub.h - * Stub support - * - * \author Rickard E. (Rik) Faith - */ - /* * Created: Fri Jan 19 10:48:35 2001 by faith@acm.org * * Copyright 2001 VA Linux Systems, Inc., Sunnyvale, California. * All Rights Reserved. * + * Author Rickard E. (Rik) Faith + * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation @@ -425,11 +420,15 @@ void drm_minor_release(struct drm_minor *minor) } /** - * Called via drm_exit() at module unload time or when pci device is - * unplugged. + * drm_put_dev - Unregister and release a DRM device + * @dev: DRM device * - * Cleans up all DRM device, calling drm_lastclose(). + * Called at module unload time or when a PCI device is unplugged. * + * Use of this function is discouraged. It will eventually go away completely. + * Please use drm_dev_unregister() and drm_dev_unref() explicitly instead. + * + * Cleans up all DRM device, calling drm_lastclose(). */ void drm_put_dev(struct drm_device *dev) { @@ -536,7 +535,7 @@ static void drm_fs_inode_free(struct inode *inode) } /** - * drm_dev_alloc - Allocate new drm device + * drm_dev_alloc - Allocate new DRM device * @driver: DRM driver to allocate device for * @parent: Parent device object * @@ -690,6 +689,7 @@ EXPORT_SYMBOL(drm_dev_unref); /** * drm_dev_register - Register DRM device * @dev: Device to register + * @flags: Flags passed to the driver's .load() function * * Register the DRM device @dev with the system, advertise device to user-space * and start normal device operation. @dev must be allocated via drm_dev_alloc() diff --git a/drivers/gpu/drm/drm_usb.c b/drivers/gpu/drm/drm_usb.c index c6c7c29ad46f..f2fe94aab901 100644 --- a/drivers/gpu/drm/drm_usb.c +++ b/drivers/gpu/drm/drm_usb.c @@ -45,7 +45,17 @@ static int drm_usb_set_busid(struct drm_device *dev, static struct drm_bus drm_usb_bus = { .set_busid = drm_usb_set_busid, }; - + +/** + * drm_usb_init - Register matching USB devices with the DRM subsystem + * @driver: DRM device driver + * @udriver: USB device driver + * + * Registers one or more devices matched by a USB driver with the DRM + * subsystem. + * + * Return: 0 on success or a negative error code on failure. + */ int drm_usb_init(struct drm_driver *driver, struct usb_driver *udriver) { int res; @@ -58,6 +68,14 @@ int drm_usb_init(struct drm_driver *driver, struct usb_driver *udriver) } EXPORT_SYMBOL(drm_usb_init); +/** + * drm_usb_exit - Unregister matching USB devices from the DRM subsystem + * @driver: DRM device driver + * @udriver: USB device driver + * + * Unregisters one or more devices matched by a USB driver from the DRM + * subsystem. + */ void drm_usb_exit(struct drm_driver *driver, struct usb_driver *udriver) { -- cgit v1.2.3 From b528ae7190867cd079bae5d6cf48c17d673428ae Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 23 Apr 2014 11:52:10 +0200 Subject: drm: Document how to register devices without struct drm_bus With the recent addition of the drm_set_unique() function, devices can now be registered without requiring a drm_bus. Add a brief description to the DRM docbook to show how that can be achieved. Reviewed-by: Daniel Vetter Signed-off-by: Thierry Reding --- Documentation/DocBook/drm.tmpl | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index ba09b6f1e5b3..d95027f6e977 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -141,6 +141,12 @@ and then pass it to one of the drm_*_init() functions to register it with the DRM subsystem. + + Newer drivers that no longer require a drm_bus + structure can alternatively use the low-level device initialization and + registration functions such as drm_dev_alloc() and + drm_dev_register() directly. + The drm_driver structure contains static information that describes the driver and features it supports, and @@ -290,6 +296,26 @@ char *date; !Edrivers/gpu/drm/drm_pci.c !Edrivers/gpu/drm/drm_usb.c !Edrivers/gpu/drm/drm_platform.c + + New drivers that no longer rely on the services provided by the + drm_bus structure can call the low-level + device registration functions directly. The + drm_dev_alloc() function can be used to allocate + and initialize a new drm_device structure. + Drivers will typically want to perform some additional setup on this + structure, such as allocating driver-specific data and storing a + pointer to it in the DRM device's dev_private + field. Drivers should also set the device's unique name using the + drm_dev_set_unique() function. After it has been + set up a device can be registered with the DRM subsystem by calling + drm_dev_register(). This will cause the device to + be exposed to userspace and will call the driver's + .load() implementation. When a device is + removed, the DRM device can safely be unregistered and freed by calling + drm_dev_unregister() followed by a call to + drm_dev_unref(). + +!Edrivers/gpu/drm/drm_stub.c Driver Load -- cgit v1.2.3 From 1c03a2d04d7ab6d27c1fef8614f08187d974bd21 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 2 Jun 2014 22:49:28 +0530 Subject: cpufreq: add support for intermediate (stable) frequencies Douglas Anderson, recently pointed out an interesting problem due to which udelay() was expiring earlier than it should. While transitioning between frequencies few platforms may temporarily switch to a stable frequency, waiting for the main PLL to stabilize. For example: When we transition between very low frequencies on exynos, like between 200MHz and 300MHz, we may temporarily switch to a PLL running at 800MHz. No CPUFREQ notification is sent for that. That means there's a period of time when we're running at 800MHz but loops_per_jiffy is calibrated at between 200MHz and 300MHz. And so udelay behaves badly. To get this fixed in a generic way, introduce another set of callbacks get_intermediate() and target_intermediate(), only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION unset. get_intermediate() should return a stable intermediate frequency platform wants to switch to, and target_intermediate() should set CPU to that frequency, before jumping to the frequency corresponding to 'index'. Core will take care of sending notifications and driver doesn't have to handle them in target_intermediate() or target_index(). NOTE: ->target_index() should restore to policy->restore_freq in case of failures as core would send notifications for that. Tested-by: Stephen Warren Signed-off-by: Viresh Kumar Reviewed-by: Doug Anderson Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/cpu-drivers.txt | 29 ++++++++++++++- drivers/cpufreq/cpufreq.c | 67 ++++++++++++++++++++++++++++++---- include/linux/cpufreq.h | 25 +++++++++++++ 3 files changed, 112 insertions(+), 9 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index b045fe54986a..14f4e6336d88 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -26,6 +26,7 @@ Contents: 1.4 target/target_index or setpolicy? 1.5 target/target_index 1.6 setpolicy +1.7 get_intermediate and target_intermediate 2. Frequency Table Helpers @@ -79,6 +80,10 @@ cpufreq_driver.attr - A pointer to a NULL-terminated list of "struct freq_attr" which allow to export values to sysfs. +cpufreq_driver.get_intermediate +and target_intermediate Used to switch to stable frequency while + changing CPU frequency. + 1.2 Per-CPU Initialization -------------------------- @@ -151,7 +156,7 @@ Some cpufreq-capable processors switch the frequency between certain limits on their own. These shall use the ->setpolicy call -1.4. target/target_index +1.5. target/target_index ------------- The target_index call has two arguments: struct cpufreq_policy *policy, @@ -160,6 +165,9 @@ and unsigned int index (into the exposed frequency table). The CPUfreq driver must set the new frequency when called here. The actual frequency must be determined by freq_table[index].frequency. +It should always restore to earlier frequency (i.e. policy->restore_freq) in +case of errors, even if we switched to intermediate frequency earlier. + Deprecated: ---------- The target call has three arguments: struct cpufreq_policy *policy, @@ -179,7 +187,7 @@ Here again the frequency table helper might assist you - see section 2 for details. -1.5 setpolicy +1.6 setpolicy --------------- The setpolicy call only takes a struct cpufreq_policy *policy as @@ -190,6 +198,23 @@ setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check the reference implementation in drivers/cpufreq/longrun.c +1.7 get_intermediate and target_intermediate +-------------------------------------------- + +Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION unset. + +get_intermediate should return a stable intermediate frequency platform wants to +switch to, and target_intermediate() should set CPU to to that frequency, before +jumping to the frequency corresponding to 'index'. Core will take care of +sending notifications and driver doesn't have to handle them in +target_intermediate() or target_index(). + +Drivers can return '0' from get_intermediate() in case they don't wish to switch +to intermediate frequency for some target frequency. In that case core will +directly call ->target_index(). + +NOTE: ->target_index() should restore to policy->restore_freq in case of +failures as core would send notifications for that. 2. Frequency Table Helpers diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index ae11dd51f81d..aed2b0cb83dc 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1816,20 +1816,55 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier); * GOVERNORS * *********************************************************************/ +/* Must set freqs->new to intermediate frequency */ +static int __target_intermediate(struct cpufreq_policy *policy, + struct cpufreq_freqs *freqs, int index) +{ + int ret; + + freqs->new = cpufreq_driver->get_intermediate(policy, index); + + /* We don't need to switch to intermediate freq */ + if (!freqs->new) + return 0; + + pr_debug("%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\n", + __func__, policy->cpu, freqs->old, freqs->new); + + cpufreq_freq_transition_begin(policy, freqs); + ret = cpufreq_driver->target_intermediate(policy, index); + cpufreq_freq_transition_end(policy, freqs, ret); + + if (ret) + pr_err("%s: Failed to change to intermediate frequency: %d\n", + __func__, ret); + + return ret; +} + static int __target_index(struct cpufreq_policy *policy, struct cpufreq_frequency_table *freq_table, int index) { - struct cpufreq_freqs freqs; + struct cpufreq_freqs freqs = {.old = policy->cur, .flags = 0}; + unsigned int intermediate_freq = 0; int retval = -EINVAL; bool notify; notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION); - if (notify) { - freqs.old = policy->cur; - freqs.new = freq_table[index].frequency; - freqs.flags = 0; + /* Handle switching to intermediate frequency */ + if (cpufreq_driver->get_intermediate) { + retval = __target_intermediate(policy, &freqs, index); + if (retval) + return retval; + + intermediate_freq = freqs.new; + /* Set old freq to intermediate */ + if (intermediate_freq) + freqs.old = freqs.new; + } + freqs.new = freq_table[index].frequency; pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n", __func__, policy->cpu, freqs.old, freqs.new); @@ -1841,9 +1876,23 @@ static int __target_index(struct cpufreq_policy *policy, pr_err("%s: Failed to change cpu frequency: %d\n", __func__, retval); - if (notify) + if (notify) { cpufreq_freq_transition_end(policy, &freqs, retval); + /* + * Failed after setting to intermediate freq? Driver should have + * reverted back to initial frequency and so should we. Check + * here for intermediate_freq instead of get_intermediate, in + * case we have't switched to intermediate freq at all. + */ + if (unlikely(retval && intermediate_freq)) { + freqs.old = intermediate_freq; + freqs.new = policy->restore_freq; + cpufreq_freq_transition_begin(policy, &freqs); + cpufreq_freq_transition_end(policy, &freqs, 0); + } + } + return retval; } @@ -1875,6 +1924,9 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, if (target_freq == policy->cur) return 0; + /* Save last value to restore later on errors */ + policy->restore_freq = policy->cur; + if (cpufreq_driver->target) retval = cpufreq_driver->target(policy, target_freq, relation); else if (cpufreq_driver->target_index) { @@ -2361,7 +2413,8 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) !(driver_data->setpolicy || driver_data->target_index || driver_data->target) || (driver_data->setpolicy && (driver_data->target_index || - driver_data->target))) + driver_data->target)) || + (!!driver_data->get_intermediate != !!driver_data->target_intermediate)) return -EINVAL; pr_debug("trying to register driver %s\n", driver_data->name); diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 3f458896d45c..ec4112d257bc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -75,6 +75,7 @@ struct cpufreq_policy { unsigned int max; /* in kHz */ unsigned int cur; /* in kHz, only needed if cpufreq * governors are used */ + unsigned int restore_freq; /* = policy->cur before transition */ unsigned int suspend_freq; /* freq to set during suspend */ unsigned int policy; /* see above */ @@ -221,11 +222,35 @@ struct cpufreq_driver { /* define one out of two */ int (*setpolicy) (struct cpufreq_policy *policy); + + /* + * On failure, should always restore frequency to policy->restore_freq + * (i.e. old freq). + */ int (*target) (struct cpufreq_policy *policy, /* Deprecated */ unsigned int target_freq, unsigned int relation); int (*target_index) (struct cpufreq_policy *policy, unsigned int index); + /* + * Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION + * unset. + * + * get_intermediate should return a stable intermediate frequency + * platform wants to switch to and target_intermediate() should set CPU + * to to that frequency, before jumping to the frequency corresponding + * to 'index'. Core will take care of sending notifications and driver + * doesn't have to handle them in target_intermediate() or + * target_index(). + * + * Drivers can return '0' from get_intermediate() in case they don't + * wish to switch to intermediate frequency for some target frequency. + * In that case core will directly call ->target_index(). + */ + unsigned int (*get_intermediate)(struct cpufreq_policy *policy, + unsigned int index); + int (*target_intermediate)(struct cpufreq_policy *policy, + unsigned int index); /* should be defined, if possible */ unsigned int (*get) (unsigned int cpu); -- cgit v1.2.3 From 7c123b6a1c5ce1d7900b4ef7bab5f0491e4f674e Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Thu, 5 Jun 2014 09:15:00 -0500 Subject: amd-xgbe: AMD 10GbE device bindings documentation This patch provides the documentation of the device bindings for the AMD 10GbE platform driver. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- .../devicetree/bindings/net/amd-xgbe-phy.txt | 17 +++++++++++ Documentation/devicetree/bindings/net/amd-xgbe.txt | 34 ++++++++++++++++++++++ 2 files changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/amd-xgbe-phy.txt create mode 100644 Documentation/devicetree/bindings/net/amd-xgbe.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt new file mode 100644 index 000000000000..d01ed63d3ebb --- /dev/null +++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt @@ -0,0 +1,17 @@ +* AMD 10GbE PHY driver (amd-xgbe-phy) + +Required properties: +- compatible: Should be "amd,xgbe-phy-seattle-v1a" and + "ethernet-phy-ieee802.3-c45" +- reg: Address and length of the register sets for the device + - SerDes Rx/Tx registers + - SerDes integration registers (1/2) + - SerDes integration registers (2/2) + +Example: + xgbe_phy@e1240800 { + compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; + reg = <0 0xe1240800 0 0x00400>, + <0 0xe1250000 0 0x00060>, + <0 0xe1250080 0 0x00004>; + }; diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt new file mode 100644 index 000000000000..ea0c7908a3b8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt @@ -0,0 +1,34 @@ +* AMD 10GbE driver (amd-xgbe) + +Required properties: +- compatible: Should be "amd,xgbe-seattle-v1a" +- reg: Address and length of the register sets for the device + - MAC registers + - PCS registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the amd-xgbe interrupt +- clocks: Should be the DMA clock for the amd-xgbe device (used for + calculating the correct Rx interrupt watchdog timer value on a DMA + channel for coalescing) +- clock-names: Should be the name of the DMA clock, "dma_clk" +- phy-handle: See ethernet.txt file in the same directory +- phy-mode: See ethernet.txt file in the same directory + +Optional properties: +- mac-address: mac address to be assigned to the device. Can be overridden + by UEFI. + +Example: + xgbe@e0700000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0 0xe0700000 0 0x80000>, + <0 0xe0780000 0 0x80000>; + interrupt-parent = <&gic>; + interrupts = <0 325 4>; + clocks = <&xgbe_clk>; + clock-names = "dma_clk"; + phy-handle = <&phy>; + phy-mode = "xgmii"; + mac-address = [ 02 a1 a2 a3 a4 a5 ]; + }; -- cgit v1.2.3 From b4be018921879ba7452379af8fb7320833a12bd4 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 16 May 2014 05:45:59 -0500 Subject: CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum frequency it can be locked at. Duty Cycle Correction circuit is used to recover a correct duty cycle for achieving higher frequencies (hardware internally switches output to M3 output(CLKOUTHIF) from M2 output (CLKOUT)). So provide support to setup required data to handle Duty cycle by the setting up the minimum frequency for DPLL. 1.4GHz is common for all these devices and is based on Technical Reference Manual information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output Clocks Parameters", and equivalent information from DRA75x, DRA72x documentation(SPRUHP2E, SPRUHI2P). Signed-off-by: Nishanth Menon [t-kristo@ti.com: updated for latest dpll init API call] Signed-off-by: Tero Kristo --- Documentation/devicetree/bindings/clock/ti/dpll.txt | 1 + drivers/clk/ti/dpll.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt index 50a1a427608f..df57009ff8e7 100644 --- a/Documentation/devicetree/bindings/clock/ti/dpll.txt +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -24,6 +24,7 @@ Required properties: "ti,omap4-dpll-core-clock", "ti,omap4-dpll-m4xen-clock", "ti,omap4-dpll-j-type-clock", + "ti,omap5-mpu-dpll-clock", "ti,am3-dpll-no-gate-clock", "ti,am3-dpll-j-type-clock", "ti,am3-dpll-no-gate-j-type-clock", diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c index 34e233990212..abd956d5f838 100644 --- a/drivers/clk/ti/dpll.c +++ b/drivers/clk/ti/dpll.c @@ -433,6 +433,27 @@ static void __init of_ti_omap4_dpll_setup(struct device_node *node) CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", of_ti_omap4_dpll_setup); +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) { const struct dpll_data dd = { -- cgit v1.2.3 From a333f7ad1db5e77eea411b058d95a5d3587ab141 Mon Sep 17 00:00:00 2001 From: Stéphane Marchesin Date: Fri, 23 May 2014 19:27:59 -0700 Subject: drm/panel: simple - Add AUO B133XTN01 panel support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This panel is used by nyan-big and can be supported by the simple-panel driver. Signed-off-by: Stéphane Marchesin [treding@nvidia.com: add device tree binding document] Signed-off-by: Thierry Reding --- .../devicetree/bindings/panel/auo,b133xtn01.txt | 7 ++++++ drivers/gpu/drm/panel/panel-simple.c | 25 ++++++++++++++++++++++ 2 files changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/auo,b133xtn01.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt b/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt new file mode 100644 index 000000000000..7443b7c76769 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel + +Required properties: +- compatible: should be "auo,b133xtn01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index abae40c58086..a25136132c31 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -291,6 +291,28 @@ static const struct panel_desc auo_b101aw03 = { }, }; +static const struct drm_display_mode auo_b133xtn01_mode = { + .clock = 69500, + .hdisplay = 1366, + .hsync_start = 1366 + 48, + .hsync_end = 1366 + 48 + 32, + .htotal = 1366 + 48 + 32 + 20, + .vdisplay = 768, + .vsync_start = 768 + 3, + .vsync_end = 768 + 3 + 6, + .vtotal = 768 + 3 + 6 + 13, + .vrefresh = 60, +}; + +static const struct panel_desc auo_b133xtn01 = { + .modes = &auo_b133xtn01_mode, + .num_modes = 1, + .size = { + .width = 293, + .height = 165, + }, +}; + static const struct drm_display_mode chunghwa_claa101wa01a_mode = { .clock = 72070, .hdisplay = 1366, @@ -429,6 +451,9 @@ static const struct of_device_id platform_of_match[] = { { .compatible = "auo,b101aw03", .data = &auo_b101aw03, + }, { + .compatible = "auo,b133xtn01", + .data = &auo_b133xtn01, }, { .compatible = "chunghwa,claa101wa01a", .data = &chunghwa_claa101wa01a -- cgit v1.2.3 From 9b758d4e293deb282dd4870503e4d2778cf69df0 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Mon, 9 Jun 2014 18:01:42 +0530 Subject: PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt Extend the year to 2014 in the copyright. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- Documentation/power/suspend-and-cpuhotplug.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.txt index e13dafc8e8f1..2850df3bf957 100644 --- a/Documentation/power/suspend-and-cpuhotplug.txt +++ b/Documentation/power/suspend-and-cpuhotplug.txt @@ -1,6 +1,6 @@ Interaction of Suspend code (S3) with the CPU hotplug infrastructure - (C) 2011 Srivatsa S. Bhat + (C) 2011 - 2014 Srivatsa S. Bhat I. How does the regular CPU hotplug code differ from how the Suspend-to-RAM -- cgit v1.2.3 From 4c0dae57873edb1560b738c6519361c5ecd443ae Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 9 Jun 2014 14:40:35 +0100 Subject: drm/doc: Fix nouveau typo Signed-off-by: Damien Lespiau Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- Documentation/DocBook/drm.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index d95027f6e977..c526d8194883 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -3081,7 +3081,7 @@ void intel_crt_init(struct drm_device *dev) TBD - noveau + nouveau NV10 Overlay "colorkey" RANGE -- cgit v1.2.3 From 597486164e4da173be643107b5d15da88f0d689a Mon Sep 17 00:00:00 2001 From: Damien Lespiau Date: Mon, 9 Jun 2014 14:20:22 +0100 Subject: drm/doc: Add the "type" plane property to the list of properties Matt aded this plane property before we had a table giving a summary of the properties. Add it there. Cc: Matt Roper Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie --- Documentation/DocBook/drm.tmpl | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index c526d8194883..7df3134ebc0e 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2502,7 +2502,7 @@ void intel_crt_init(struct drm_device *dev) Description/Restrictions - DRM + DRM Generic “EDID” BLOB | IMMUTABLE @@ -2518,6 +2518,14 @@ void intel_crt_init(struct drm_device *dev) Contains DPMS operation mode value. + Plane + “type” + ENUM | IMMUTABLE + { "Overlay", "Primary", "Cursor" } + Plane + Plane type + + DVI-I “subconnector” ENUM -- cgit v1.2.3 From 4be7f0a30bd85c82278ffd65527b5276ffa23fff Mon Sep 17 00:00:00 2001 From: Warren Turkal Date: Sun, 8 Jun 2014 22:19:29 -0700 Subject: kbuild: Fix a typo in documentation Signed-off-by: Warren Turkal Acked-by: Randy Dunlap Signed-off-by: Michal Marek --- Documentation/kbuild/modules.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt index 69372fb98cf8..3fb39e0116b4 100644 --- a/Documentation/kbuild/modules.txt +++ b/Documentation/kbuild/modules.txt @@ -470,7 +470,7 @@ build. Sometimes, an external module uses exported symbols from another external module. kbuild needs to have full knowledge of - all symbols to avoid spliitting out warnings about undefined + all symbols to avoid spitting out warnings about undefined symbols. Three solutions exist for this situation. NOTE: The method with a top-level kbuild file is recommended -- cgit v1.2.3 From e430f34ee5192c84bcabd3c79ab7e2388b5eec74 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 6 Jun 2014 14:46:06 -0700 Subject: net: filter: cleanup A/X name usage The macro 'A' used in internal BPF interpreter: #define A regs[insn->a_reg] was easily confused with the name of classic BPF register 'A', since 'A' would mean two different things depending on context. This patch is trying to clean up the naming and clarify its usage in the following way: - A and X are names of two classic BPF registers - BPF_REG_A denotes internal BPF register R0 used to map classic register A in internal BPF programs generated from classic - BPF_REG_X denotes internal BPF register R7 used to map classic register X in internal BPF programs generated from classic - internal BPF instruction format: struct sock_filter_int { __u8 code; /* opcode */ __u8 dst_reg:4; /* dest register */ __u8 src_reg:4; /* source register */ __s16 off; /* signed offset */ __s32 imm; /* signed immediate constant */ }; - BPF_X/BPF_K is 1 bit used to encode source operand of instruction In classic: BPF_X - means use register X as source operand BPF_K - means use 32-bit immediate as source operand In internal: BPF_X - means use 'src_reg' register as source operand BPF_K - means use 32-bit immediate as source operand Suggested-by: Chema Gonzalez Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Acked-by: Chema Gonzalez Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 2 +- arch/x86/net/bpf_jit_comp.c | 260 ++++++++++++++++++------------------ include/linux/filter.h | 156 ++++++++++++---------- net/core/filter.c | 198 +++++++++++++-------------- 4 files changed, 314 insertions(+), 302 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 58c443926647..9f49b8690500 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -805,7 +805,7 @@ to seccomp_data, for converted BPF filters R1 points to a skb. A program, that is translated internally consists of the following elements: - op:16, jt:8, jf:8, k:32 ==> op:8, a_reg:4, x_reg:4, off:16, imm:32 + op:16, jt:8, jf:8, k:32 ==> op:8, dst_reg:4, src_reg:4, off:16, imm:32 So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field has room for new instructions. Some of them may use 16/24/32 byte encoding. New diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 080f3f071bb0..99bef86ed6df 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -64,10 +64,10 @@ static inline bool is_simm32(s64 value) return value == (s64) (s32) value; } -/* mov A, X */ -#define EMIT_mov(A, X) \ - do {if (A != X) \ - EMIT3(add_2mod(0x48, A, X), 0x89, add_2reg(0xC0, A, X)); \ +/* mov dst, src */ +#define EMIT_mov(DST, SRC) \ + do {if (DST != SRC) \ + EMIT3(add_2mod(0x48, DST, SRC), 0x89, add_2reg(0xC0, DST, SRC)); \ } while (0) static int bpf_size_to_x86_bytes(int bpf_size) @@ -194,16 +194,16 @@ static inline u8 add_2mod(u8 byte, u32 r1, u32 r2) return byte; } -/* encode dest register 'a_reg' into x64 opcode 'byte' */ -static inline u8 add_1reg(u8 byte, u32 a_reg) +/* encode 'dst_reg' register into x64 opcode 'byte' */ +static inline u8 add_1reg(u8 byte, u32 dst_reg) { - return byte + reg2hex[a_reg]; + return byte + reg2hex[dst_reg]; } -/* encode dest 'a_reg' and src 'x_reg' registers into x64 opcode 'byte' */ -static inline u8 add_2reg(u8 byte, u32 a_reg, u32 x_reg) +/* encode 'dst_reg' and 'src_reg' registers into x64 opcode 'byte' */ +static inline u8 add_2reg(u8 byte, u32 dst_reg, u32 src_reg) { - return byte + reg2hex[a_reg] + (reg2hex[x_reg] << 3); + return byte + reg2hex[dst_reg] + (reg2hex[src_reg] << 3); } struct jit_context { @@ -286,9 +286,9 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, } for (i = 0; i < insn_cnt; i++, insn++) { - const s32 K = insn->imm; - u32 a_reg = insn->a_reg; - u32 x_reg = insn->x_reg; + const s32 imm32 = insn->imm; + u32 dst_reg = insn->dst_reg; + u32 src_reg = insn->src_reg; u8 b1 = 0, b2 = 0, b3 = 0; s64 jmp_offset; u8 jmp_cond; @@ -315,32 +315,32 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, case BPF_XOR: b2 = 0x31; break; } if (BPF_CLASS(insn->code) == BPF_ALU64) - EMIT1(add_2mod(0x48, a_reg, x_reg)); - else if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT1(add_2mod(0x40, a_reg, x_reg)); - EMIT2(b2, add_2reg(0xC0, a_reg, x_reg)); + EMIT1(add_2mod(0x48, dst_reg, src_reg)); + else if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT1(add_2mod(0x40, dst_reg, src_reg)); + EMIT2(b2, add_2reg(0xC0, dst_reg, src_reg)); break; - /* mov A, X */ + /* mov dst, src */ case BPF_ALU64 | BPF_MOV | BPF_X: - EMIT_mov(a_reg, x_reg); + EMIT_mov(dst_reg, src_reg); break; - /* mov32 A, X */ + /* mov32 dst, src */ case BPF_ALU | BPF_MOV | BPF_X: - if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT1(add_2mod(0x40, a_reg, x_reg)); - EMIT2(0x89, add_2reg(0xC0, a_reg, x_reg)); + if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT1(add_2mod(0x40, dst_reg, src_reg)); + EMIT2(0x89, add_2reg(0xC0, dst_reg, src_reg)); break; - /* neg A */ + /* neg dst */ case BPF_ALU | BPF_NEG: case BPF_ALU64 | BPF_NEG: if (BPF_CLASS(insn->code) == BPF_ALU64) - EMIT1(add_1mod(0x48, a_reg)); - else if (is_ereg(a_reg)) - EMIT1(add_1mod(0x40, a_reg)); - EMIT2(0xF7, add_1reg(0xD8, a_reg)); + EMIT1(add_1mod(0x48, dst_reg)); + else if (is_ereg(dst_reg)) + EMIT1(add_1mod(0x40, dst_reg)); + EMIT2(0xF7, add_1reg(0xD8, dst_reg)); break; case BPF_ALU | BPF_ADD | BPF_K: @@ -354,9 +354,9 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, case BPF_ALU64 | BPF_OR | BPF_K: case BPF_ALU64 | BPF_XOR | BPF_K: if (BPF_CLASS(insn->code) == BPF_ALU64) - EMIT1(add_1mod(0x48, a_reg)); - else if (is_ereg(a_reg)) - EMIT1(add_1mod(0x40, a_reg)); + EMIT1(add_1mod(0x48, dst_reg)); + else if (is_ereg(dst_reg)) + EMIT1(add_1mod(0x40, dst_reg)); switch (BPF_OP(insn->code)) { case BPF_ADD: b3 = 0xC0; break; @@ -366,10 +366,10 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, case BPF_XOR: b3 = 0xF0; break; } - if (is_imm8(K)) - EMIT3(0x83, add_1reg(b3, a_reg), K); + if (is_imm8(imm32)) + EMIT3(0x83, add_1reg(b3, dst_reg), imm32); else - EMIT2_off32(0x81, add_1reg(b3, a_reg), K); + EMIT2_off32(0x81, add_1reg(b3, dst_reg), imm32); break; case BPF_ALU64 | BPF_MOV | BPF_K: @@ -377,23 +377,23 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, * use 'mov eax, imm32' (which zero-extends imm32) * to save 2 bytes */ - if (K < 0) { + if (imm32 < 0) { /* 'mov rax, imm32' sign extends imm32 */ - b1 = add_1mod(0x48, a_reg); + b1 = add_1mod(0x48, dst_reg); b2 = 0xC7; b3 = 0xC0; - EMIT3_off32(b1, b2, add_1reg(b3, a_reg), K); + EMIT3_off32(b1, b2, add_1reg(b3, dst_reg), imm32); break; } case BPF_ALU | BPF_MOV | BPF_K: /* mov %eax, imm32 */ - if (is_ereg(a_reg)) - EMIT1(add_1mod(0x40, a_reg)); - EMIT1_off32(add_1reg(0xB8, a_reg), K); + if (is_ereg(dst_reg)) + EMIT1(add_1mod(0x40, dst_reg)); + EMIT1_off32(add_1reg(0xB8, dst_reg), imm32); break; - /* A %= X, A /= X, A %= K, A /= K */ + /* dst %= src, dst /= src, dst %= imm32, dst /= imm32 */ case BPF_ALU | BPF_MOD | BPF_X: case BPF_ALU | BPF_DIV | BPF_X: case BPF_ALU | BPF_MOD | BPF_K: @@ -406,14 +406,14 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, EMIT1(0x52); /* push rdx */ if (BPF_SRC(insn->code) == BPF_X) - /* mov r11, X */ - EMIT_mov(AUX_REG, x_reg); + /* mov r11, src_reg */ + EMIT_mov(AUX_REG, src_reg); else - /* mov r11, K */ - EMIT3_off32(0x49, 0xC7, 0xC3, K); + /* mov r11, imm32 */ + EMIT3_off32(0x49, 0xC7, 0xC3, imm32); - /* mov rax, A */ - EMIT_mov(BPF_REG_0, a_reg); + /* mov rax, dst_reg */ + EMIT_mov(BPF_REG_0, dst_reg); /* xor edx, edx * equivalent to 'xor rdx, rdx', but one byte less @@ -421,7 +421,7 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, EMIT2(0x31, 0xd2); if (BPF_SRC(insn->code) == BPF_X) { - /* if (X == 0) return 0 */ + /* if (src_reg == 0) return 0 */ /* cmp r11, 0 */ EMIT4(0x49, 0x83, 0xFB, 0x00); @@ -457,8 +457,8 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, EMIT1(0x5A); /* pop rdx */ EMIT1(0x58); /* pop rax */ - /* mov A, r11 */ - EMIT_mov(a_reg, AUX_REG); + /* mov dst_reg, r11 */ + EMIT_mov(dst_reg, AUX_REG); break; case BPF_ALU | BPF_MUL | BPF_K: @@ -468,15 +468,15 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, EMIT1(0x50); /* push rax */ EMIT1(0x52); /* push rdx */ - /* mov r11, A */ - EMIT_mov(AUX_REG, a_reg); + /* mov r11, dst_reg */ + EMIT_mov(AUX_REG, dst_reg); if (BPF_SRC(insn->code) == BPF_X) - /* mov rax, X */ - EMIT_mov(BPF_REG_0, x_reg); + /* mov rax, src_reg */ + EMIT_mov(BPF_REG_0, src_reg); else - /* mov rax, K */ - EMIT3_off32(0x48, 0xC7, 0xC0, K); + /* mov rax, imm32 */ + EMIT3_off32(0x48, 0xC7, 0xC0, imm32); if (BPF_CLASS(insn->code) == BPF_ALU64) EMIT1(add_1mod(0x48, AUX_REG)); @@ -491,8 +491,8 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, EMIT1(0x5A); /* pop rdx */ EMIT1(0x58); /* pop rax */ - /* mov A, r11 */ - EMIT_mov(a_reg, AUX_REG); + /* mov dst_reg, r11 */ + EMIT_mov(dst_reg, AUX_REG); break; /* shifts */ @@ -503,39 +503,39 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, case BPF_ALU64 | BPF_RSH | BPF_K: case BPF_ALU64 | BPF_ARSH | BPF_K: if (BPF_CLASS(insn->code) == BPF_ALU64) - EMIT1(add_1mod(0x48, a_reg)); - else if (is_ereg(a_reg)) - EMIT1(add_1mod(0x40, a_reg)); + EMIT1(add_1mod(0x48, dst_reg)); + else if (is_ereg(dst_reg)) + EMIT1(add_1mod(0x40, dst_reg)); switch (BPF_OP(insn->code)) { case BPF_LSH: b3 = 0xE0; break; case BPF_RSH: b3 = 0xE8; break; case BPF_ARSH: b3 = 0xF8; break; } - EMIT3(0xC1, add_1reg(b3, a_reg), K); + EMIT3(0xC1, add_1reg(b3, dst_reg), imm32); break; case BPF_ALU | BPF_END | BPF_FROM_BE: - switch (K) { + switch (imm32) { case 16: /* emit 'ror %ax, 8' to swap lower 2 bytes */ EMIT1(0x66); - if (is_ereg(a_reg)) + if (is_ereg(dst_reg)) EMIT1(0x41); - EMIT3(0xC1, add_1reg(0xC8, a_reg), 8); + EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8); break; case 32: /* emit 'bswap eax' to swap lower 4 bytes */ - if (is_ereg(a_reg)) + if (is_ereg(dst_reg)) EMIT2(0x41, 0x0F); else EMIT1(0x0F); - EMIT1(add_1reg(0xC8, a_reg)); + EMIT1(add_1reg(0xC8, dst_reg)); break; case 64: /* emit 'bswap rax' to swap 8 bytes */ - EMIT3(add_1mod(0x48, a_reg), 0x0F, - add_1reg(0xC8, a_reg)); + EMIT3(add_1mod(0x48, dst_reg), 0x0F, + add_1reg(0xC8, dst_reg)); break; } break; @@ -543,117 +543,117 @@ static int do_jit(struct sk_filter *bpf_prog, int *addrs, u8 *image, case BPF_ALU | BPF_END | BPF_FROM_LE: break; - /* ST: *(u8*)(a_reg + off) = imm */ + /* ST: *(u8*)(dst_reg + off) = imm */ case BPF_ST | BPF_MEM | BPF_B: - if (is_ereg(a_reg)) + if (is_ereg(dst_reg)) EMIT2(0x41, 0xC6); else EMIT1(0xC6); goto st; case BPF_ST | BPF_MEM | BPF_H: - if (is_ereg(a_reg)) + if (is_ereg(dst_reg)) EMIT3(0x66, 0x41, 0xC7); else EMIT2(0x66, 0xC7); goto st; case BPF_ST | BPF_MEM | BPF_W: - if (is_ereg(a_reg)) + if (is_ereg(dst_reg)) EMIT2(0x41, 0xC7); else EMIT1(0xC7); goto st; case BPF_ST | BPF_MEM | BPF_DW: - EMIT2(add_1mod(0x48, a_reg), 0xC7); + EMIT2(add_1mod(0x48, dst_reg), 0xC7); st: if (is_imm8(insn->off)) - EMIT2(add_1reg(0x40, a_reg), insn->off); + EMIT2(add_1reg(0x40, dst_reg), insn->off); else - EMIT1_off32(add_1reg(0x80, a_reg), insn->off); + EMIT1_off32(add_1reg(0x80, dst_reg), insn->off); - EMIT(K, bpf_size_to_x86_bytes(BPF_SIZE(insn->code))); + EMIT(imm32, bpf_size_to_x86_bytes(BPF_SIZE(insn->code))); break; - /* STX: *(u8*)(a_reg + off) = x_reg */ + /* STX: *(u8*)(dst_reg + off) = src_reg */ case BPF_STX | BPF_MEM | BPF_B: /* emit 'mov byte ptr [rax + off], al' */ - if (is_ereg(a_reg) || is_ereg(x_reg) || + if (is_ereg(dst_reg) || is_ereg(src_reg) || /* have to add extra byte for x86 SIL, DIL regs */ - x_reg == BPF_REG_1 || x_reg == BPF_REG_2) - EMIT2(add_2mod(0x40, a_reg, x_reg), 0x88); + src_reg == BPF_REG_1 || src_reg == BPF_REG_2) + EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88); else EMIT1(0x88); goto stx; case BPF_STX | BPF_MEM | BPF_H: - if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT3(0x66, add_2mod(0x40, a_reg, x_reg), 0x89); + if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT3(0x66, add_2mod(0x40, dst_reg, src_reg), 0x89); else EMIT2(0x66, 0x89); goto stx; case BPF_STX | BPF_MEM | BPF_W: - if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT2(add_2mod(0x40, a_reg, x_reg), 0x89); + if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x89); else EMIT1(0x89); goto stx; case BPF_STX | BPF_MEM | BPF_DW: - EMIT2(add_2mod(0x48, a_reg, x_reg), 0x89); + EMIT2(add_2mod(0x48, dst_reg, src_reg), 0x89); stx: if (is_imm8(insn->off)) - EMIT2(add_2reg(0x40, a_reg, x_reg), insn->off); + EMIT2(add_2reg(0x40, dst_reg, src_reg), insn->off); else - EMIT1_off32(add_2reg(0x80, a_reg, x_reg), + EMIT1_off32(add_2reg(0x80, dst_reg, src_reg), insn->off); break; - /* LDX: a_reg = *(u8*)(x_reg + off) */ + /* LDX: dst_reg = *(u8*)(src_reg + off) */ case BPF_LDX | BPF_MEM | BPF_B: /* emit 'movzx rax, byte ptr [rax + off]' */ - EMIT3(add_2mod(0x48, x_reg, a_reg), 0x0F, 0xB6); + EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB6); goto ldx; case BPF_LDX | BPF_MEM | BPF_H: /* emit 'movzx rax, word ptr [rax + off]' */ - EMIT3(add_2mod(0x48, x_reg, a_reg), 0x0F, 0xB7); + EMIT3(add_2mod(0x48, src_reg, dst_reg), 0x0F, 0xB7); goto ldx; case BPF_LDX | BPF_MEM | BPF_W: /* emit 'mov eax, dword ptr [rax+0x14]' */ - if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT2(add_2mod(0x40, x_reg, a_reg), 0x8B); + if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT2(add_2mod(0x40, src_reg, dst_reg), 0x8B); else EMIT1(0x8B); goto ldx; case BPF_LDX | BPF_MEM | BPF_DW: /* emit 'mov rax, qword ptr [rax+0x14]' */ - EMIT2(add_2mod(0x48, x_reg, a_reg), 0x8B); + EMIT2(add_2mod(0x48, src_reg, dst_reg), 0x8B); ldx: /* if insn->off == 0 we can save one extra byte, but * special case of x86 r13 which always needs an offset * is not worth the hassle */ if (is_imm8(insn->off)) - EMIT2(add_2reg(0x40, x_reg, a_reg), insn->off); + EMIT2(add_2reg(0x40, src_reg, dst_reg), insn->off); else - EMIT1_off32(add_2reg(0x80, x_reg, a_reg), + EMIT1_off32(add_2reg(0x80, src_reg, dst_reg), insn->off); break; - /* STX XADD: lock *(u32*)(a_reg + off) += x_reg */ + /* STX XADD: lock *(u32*)(dst_reg + off) += src_reg */ case BPF_STX | BPF_XADD | BPF_W: /* emit 'lock add dword ptr [rax + off], eax' */ - if (is_ereg(a_reg) || is_ereg(x_reg)) - EMIT3(0xF0, add_2mod(0x40, a_reg, x_reg), 0x01); + if (is_ereg(dst_reg) || is_ereg(src_reg)) + EMIT3(0xF0, add_2mod(0x40, dst_reg, src_reg), 0x01); else EMIT2(0xF0, 0x01); goto xadd; case BPF_STX | BPF_XADD | BPF_DW: - EMIT3(0xF0, add_2mod(0x48, a_reg, x_reg), 0x01); + EMIT3(0xF0, add_2mod(0x48, dst_reg, src_reg), 0x01); xadd: if (is_imm8(insn->off)) - EMIT2(add_2reg(0x40, a_reg, x_reg), insn->off); + EMIT2(add_2reg(0x40, dst_reg, src_reg), insn->off); else - EMIT1_off32(add_2reg(0x80, a_reg, x_reg), + EMIT1_off32(add_2reg(0x80, dst_reg, src_reg), insn->off); break; /* call */ case BPF_JMP | BPF_CALL: - func = (u8 *) __bpf_call_base + K; + func = (u8 *) __bpf_call_base + imm32; jmp_offset = func - (image + addrs[i]); if (ctx->seen_ld_abs) { EMIT2(0x41, 0x52); /* push %r10 */ @@ -663,9 +663,9 @@ xadd: if (is_imm8(insn->off)) */ jmp_offset += 4; } - if (!K || !is_simm32(jmp_offset)) { + if (!imm32 || !is_simm32(jmp_offset)) { pr_err("unsupported bpf func %d addr %p image %p\n", - K, func, image); + imm32, func, image); return -EINVAL; } EMIT1_off32(0xE8, jmp_offset); @@ -682,21 +682,21 @@ xadd: if (is_imm8(insn->off)) case BPF_JMP | BPF_JGE | BPF_X: case BPF_JMP | BPF_JSGT | BPF_X: case BPF_JMP | BPF_JSGE | BPF_X: - /* cmp a_reg, x_reg */ - EMIT3(add_2mod(0x48, a_reg, x_reg), 0x39, - add_2reg(0xC0, a_reg, x_reg)); + /* cmp dst_reg, src_reg */ + EMIT3(add_2mod(0x48, dst_reg, src_reg), 0x39, + add_2reg(0xC0, dst_reg, src_reg)); goto emit_cond_jmp; case BPF_JMP | BPF_JSET | BPF_X: - /* test a_reg, x_reg */ - EMIT3(add_2mod(0x48, a_reg, x_reg), 0x85, - add_2reg(0xC0, a_reg, x_reg)); + /* test dst_reg, src_reg */ + EMIT3(add_2mod(0x48, dst_reg, src_reg), 0x85, + add_2reg(0xC0, dst_reg, src_reg)); goto emit_cond_jmp; case BPF_JMP | BPF_JSET | BPF_K: - /* test a_reg, imm32 */ - EMIT1(add_1mod(0x48, a_reg)); - EMIT2_off32(0xF7, add_1reg(0xC0, a_reg), K); + /* test dst_reg, imm32 */ + EMIT1(add_1mod(0x48, dst_reg)); + EMIT2_off32(0xF7, add_1reg(0xC0, dst_reg), imm32); goto emit_cond_jmp; case BPF_JMP | BPF_JEQ | BPF_K: @@ -705,13 +705,13 @@ xadd: if (is_imm8(insn->off)) case BPF_JMP | BPF_JGE | BPF_K: case BPF_JMP | BPF_JSGT | BPF_K: case BPF_JMP | BPF_JSGE | BPF_K: - /* cmp a_reg, imm8/32 */ - EMIT1(add_1mod(0x48, a_reg)); + /* cmp dst_reg, imm8/32 */ + EMIT1(add_1mod(0x48, dst_reg)); - if (is_imm8(K)) - EMIT3(0x83, add_1reg(0xF8, a_reg), K); + if (is_imm8(imm32)) + EMIT3(0x83, add_1reg(0xF8, dst_reg), imm32); else - EMIT2_off32(0x81, add_1reg(0xF8, a_reg), K); + EMIT2_off32(0x81, add_1reg(0xF8, dst_reg), imm32); emit_cond_jmp: /* convert BPF opcode to x86 */ switch (BPF_OP(insn->code)) { @@ -773,27 +773,27 @@ emit_jmp: func = sk_load_word; goto common_load; case BPF_LD | BPF_ABS | BPF_W: - func = CHOOSE_LOAD_FUNC(K, sk_load_word); + func = CHOOSE_LOAD_FUNC(imm32, sk_load_word); common_load: ctx->seen_ld_abs = true; jmp_offset = func - (image + addrs[i]); if (!func || !is_simm32(jmp_offset)) { pr_err("unsupported bpf func %d addr %p image %p\n", - K, func, image); + imm32, func, image); return -EINVAL; } if (BPF_MODE(insn->code) == BPF_ABS) { /* mov %esi, imm32 */ - EMIT1_off32(0xBE, K); + EMIT1_off32(0xBE, imm32); } else { - /* mov %rsi, x_reg */ - EMIT_mov(BPF_REG_2, x_reg); - if (K) { - if (is_imm8(K)) + /* mov %rsi, src_reg */ + EMIT_mov(BPF_REG_2, src_reg); + if (imm32) { + if (is_imm8(imm32)) /* add %esi, imm8 */ - EMIT3(0x83, 0xC6, K); + EMIT3(0x83, 0xC6, imm32); else /* add %esi, imm32 */ - EMIT2_off32(0x81, 0xC6, K); + EMIT2_off32(0x81, 0xC6, imm32); } } /* skb pointer is in R6 (%rbx), it will be copied into @@ -808,13 +808,13 @@ common_load: ctx->seen_ld_abs = true; func = sk_load_half; goto common_load; case BPF_LD | BPF_ABS | BPF_H: - func = CHOOSE_LOAD_FUNC(K, sk_load_half); + func = CHOOSE_LOAD_FUNC(imm32, sk_load_half); goto common_load; case BPF_LD | BPF_IND | BPF_B: func = sk_load_byte; goto common_load; case BPF_LD | BPF_ABS | BPF_B: - func = CHOOSE_LOAD_FUNC(K, sk_load_byte); + func = CHOOSE_LOAD_FUNC(imm32, sk_load_byte); goto common_load; case BPF_JMP | BPF_EXIT: diff --git a/include/linux/filter.h b/include/linux/filter.h index f0c2ad43b4af..a7e3c48d73a7 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -78,161 +78,173 @@ enum { /* Helper macros for filter block array initializers. */ -/* ALU ops on registers, bpf_add|sub|...: A += X */ +/* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */ -#define BPF_ALU64_REG(OP, A, X) \ +#define BPF_ALU64_REG(OP, DST, SRC) \ ((struct sock_filter_int) { \ .code = BPF_ALU64 | BPF_OP(OP) | BPF_X, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = 0 }) -#define BPF_ALU32_REG(OP, A, X) \ +#define BPF_ALU32_REG(OP, DST, SRC) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_OP(OP) | BPF_X, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = 0 }) -/* ALU ops on immediates, bpf_add|sub|...: A += IMM */ +/* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */ -#define BPF_ALU64_IMM(OP, A, IMM) \ +#define BPF_ALU64_IMM(OP, DST, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU64 | BPF_OP(OP) | BPF_K, \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = 0, \ .imm = IMM }) -#define BPF_ALU32_IMM(OP, A, IMM) \ +#define BPF_ALU32_IMM(OP, DST, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_OP(OP) | BPF_K, \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = 0, \ .imm = IMM }) /* Endianess conversion, cpu_to_{l,b}e(), {l,b}e_to_cpu() */ -#define BPF_ENDIAN(TYPE, A, LEN) \ +#define BPF_ENDIAN(TYPE, DST, LEN) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_END | BPF_SRC(TYPE), \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = 0, \ .imm = LEN }) -/* Short form of mov, A = X */ +/* Short form of mov, dst_reg = src_reg */ -#define BPF_MOV64_REG(A, X) \ +#define BPF_MOV64_REG(DST, SRC) \ ((struct sock_filter_int) { \ .code = BPF_ALU64 | BPF_MOV | BPF_X, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = 0 }) -#define BPF_MOV32_REG(A, X) \ +#define BPF_MOV32_REG(DST, SRC) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_MOV | BPF_X, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = 0 }) -/* Short form of mov, A = IMM */ +/* Short form of mov, dst_reg = imm32 */ -#define BPF_MOV64_IMM(A, IMM) \ +#define BPF_MOV64_IMM(DST, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU64 | BPF_MOV | BPF_K, \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = 0, \ .imm = IMM }) -#define BPF_MOV32_IMM(A, IMM) \ +#define BPF_MOV32_IMM(DST, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_MOV | BPF_K, \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = 0, \ .imm = IMM }) -/* Short form of mov based on type, BPF_X: A = X, BPF_K: A = IMM */ +/* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */ -#define BPF_MOV64_RAW(TYPE, A, X, IMM) \ +#define BPF_MOV64_RAW(TYPE, DST, SRC, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU64 | BPF_MOV | BPF_SRC(TYPE), \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = IMM }) -#define BPF_MOV32_RAW(TYPE, A, X, IMM) \ +#define BPF_MOV32_RAW(TYPE, DST, SRC, IMM) \ ((struct sock_filter_int) { \ .code = BPF_ALU | BPF_MOV | BPF_SRC(TYPE), \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = 0, \ .imm = IMM }) -/* Direct packet access, R0 = *(uint *) (skb->data + OFF) */ +/* Direct packet access, R0 = *(uint *) (skb->data + imm32) */ -#define BPF_LD_ABS(SIZE, OFF) \ +#define BPF_LD_ABS(SIZE, IMM) \ ((struct sock_filter_int) { \ .code = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS, \ - .a_reg = 0, \ - .x_reg = 0, \ + .dst_reg = 0, \ + .src_reg = 0, \ .off = 0, \ - .imm = OFF }) + .imm = IMM }) -/* Indirect packet access, R0 = *(uint *) (skb->data + X + OFF) */ +/* Indirect packet access, R0 = *(uint *) (skb->data + src_reg + imm32) */ -#define BPF_LD_IND(SIZE, X, OFF) \ +#define BPF_LD_IND(SIZE, SRC, IMM) \ ((struct sock_filter_int) { \ .code = BPF_LD | BPF_SIZE(SIZE) | BPF_IND, \ - .a_reg = 0, \ - .x_reg = X, \ + .dst_reg = 0, \ + .src_reg = SRC, \ .off = 0, \ - .imm = OFF }) + .imm = IMM }) -/* Memory store, A = *(uint *) (X + OFF), and vice versa */ +/* Memory load, dst_reg = *(uint *) (src_reg + off16) */ -#define BPF_LDX_MEM(SIZE, A, X, OFF) \ +#define BPF_LDX_MEM(SIZE, DST, SRC, OFF) \ ((struct sock_filter_int) { \ .code = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = OFF, \ .imm = 0 }) -#define BPF_STX_MEM(SIZE, A, X, OFF) \ +/* Memory store, *(uint *) (dst_reg + off16) = src_reg */ + +#define BPF_STX_MEM(SIZE, DST, SRC, OFF) \ ((struct sock_filter_int) { \ .code = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = OFF, \ .imm = 0 }) -/* Conditional jumps against registers, if (A 'op' X) goto pc + OFF */ +/* Memory store, *(uint *) (dst_reg + off16) = imm32 */ + +#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \ + ((struct sock_filter_int) { \ + .code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \ + .dst_reg = DST, \ + .src_reg = 0, \ + .off = OFF, \ + .imm = IMM }) + +/* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */ -#define BPF_JMP_REG(OP, A, X, OFF) \ +#define BPF_JMP_REG(OP, DST, SRC, OFF) \ ((struct sock_filter_int) { \ .code = BPF_JMP | BPF_OP(OP) | BPF_X, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = OFF, \ .imm = 0 }) -/* Conditional jumps against immediates, if (A 'op' IMM) goto pc + OFF */ +/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */ -#define BPF_JMP_IMM(OP, A, IMM, OFF) \ +#define BPF_JMP_IMM(OP, DST, IMM, OFF) \ ((struct sock_filter_int) { \ .code = BPF_JMP | BPF_OP(OP) | BPF_K, \ - .a_reg = A, \ - .x_reg = 0, \ + .dst_reg = DST, \ + .src_reg = 0, \ .off = OFF, \ .imm = IMM }) @@ -241,18 +253,18 @@ enum { #define BPF_EMIT_CALL(FUNC) \ ((struct sock_filter_int) { \ .code = BPF_JMP | BPF_CALL, \ - .a_reg = 0, \ - .x_reg = 0, \ + .dst_reg = 0, \ + .src_reg = 0, \ .off = 0, \ .imm = ((FUNC) - __bpf_call_base) }) /* Raw code statement block */ -#define BPF_RAW_INSN(CODE, A, X, OFF, IMM) \ +#define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM) \ ((struct sock_filter_int) { \ .code = CODE, \ - .a_reg = A, \ - .x_reg = X, \ + .dst_reg = DST, \ + .src_reg = SRC, \ .off = OFF, \ .imm = IMM }) @@ -261,8 +273,8 @@ enum { #define BPF_EXIT_INSN() \ ((struct sock_filter_int) { \ .code = BPF_JMP | BPF_EXIT, \ - .a_reg = 0, \ - .x_reg = 0, \ + .dst_reg = 0, \ + .src_reg = 0, \ .off = 0, \ .imm = 0 }) @@ -287,8 +299,8 @@ enum { struct sock_filter_int { __u8 code; /* opcode */ - __u8 a_reg:4; /* dest register */ - __u8 x_reg:4; /* source register */ + __u8 dst_reg:4; /* dest register */ + __u8 src_reg:4; /* source register */ __s16 off; /* signed offset */ __s32 imm; /* signed immediate constant */ }; diff --git a/net/core/filter.c b/net/core/filter.c index 6bd2e350e751..b3f21751b238 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -59,12 +59,12 @@ #define BPF_R10 regs[BPF_REG_10] /* Named registers */ -#define A regs[insn->a_reg] -#define X regs[insn->x_reg] +#define DST regs[insn->dst_reg] +#define SRC regs[insn->src_reg] #define FP regs[BPF_REG_FP] #define ARG1 regs[BPF_REG_ARG1] #define CTX regs[BPF_REG_CTX] -#define K insn->imm +#define IMM insn->imm /* No hurry in this branch * @@ -264,7 +264,7 @@ static unsigned int __sk_run_filter(void *ctx, const struct sock_filter_int *ins FP = (u64) (unsigned long) &stack[ARRAY_SIZE(stack)]; ARG1 = (u64) (unsigned long) ctx; - /* Register for user BPF programs need to be reset first. */ + /* Registers used in classic BPF programs need to be reset first. */ regs[BPF_REG_A] = 0; regs[BPF_REG_X] = 0; @@ -274,16 +274,16 @@ select_insn: /* ALU */ #define ALU(OPCODE, OP) \ ALU64_##OPCODE##_X: \ - A = A OP X; \ + DST = DST OP SRC; \ CONT; \ ALU_##OPCODE##_X: \ - A = (u32) A OP (u32) X; \ + DST = (u32) DST OP (u32) SRC; \ CONT; \ ALU64_##OPCODE##_K: \ - A = A OP K; \ + DST = DST OP IMM; \ CONT; \ ALU_##OPCODE##_K: \ - A = (u32) A OP (u32) K; \ + DST = (u32) DST OP (u32) IMM; \ CONT; ALU(ADD, +) @@ -296,92 +296,92 @@ select_insn: ALU(MUL, *) #undef ALU ALU_NEG: - A = (u32) -A; + DST = (u32) -DST; CONT; ALU64_NEG: - A = -A; + DST = -DST; CONT; ALU_MOV_X: - A = (u32) X; + DST = (u32) SRC; CONT; ALU_MOV_K: - A = (u32) K; + DST = (u32) IMM; CONT; ALU64_MOV_X: - A = X; + DST = SRC; CONT; ALU64_MOV_K: - A = K; + DST = IMM; CONT; ALU64_ARSH_X: - (*(s64 *) &A) >>= X; + (*(s64 *) &DST) >>= SRC; CONT; ALU64_ARSH_K: - (*(s64 *) &A) >>= K; + (*(s64 *) &DST) >>= IMM; CONT; ALU64_MOD_X: - if (unlikely(X == 0)) + if (unlikely(SRC == 0)) return 0; - tmp = A; - A = do_div(tmp, X); + tmp = DST; + DST = do_div(tmp, SRC); CONT; ALU_MOD_X: - if (unlikely(X == 0)) + if (unlikely(SRC == 0)) return 0; - tmp = (u32) A; - A = do_div(tmp, (u32) X); + tmp = (u32) DST; + DST = do_div(tmp, (u32) SRC); CONT; ALU64_MOD_K: - tmp = A; - A = do_div(tmp, K); + tmp = DST; + DST = do_div(tmp, IMM); CONT; ALU_MOD_K: - tmp = (u32) A; - A = do_div(tmp, (u32) K); + tmp = (u32) DST; + DST = do_div(tmp, (u32) IMM); CONT; ALU64_DIV_X: - if (unlikely(X == 0)) + if (unlikely(SRC == 0)) return 0; - do_div(A, X); + do_div(DST, SRC); CONT; ALU_DIV_X: - if (unlikely(X == 0)) + if (unlikely(SRC == 0)) return 0; - tmp = (u32) A; - do_div(tmp, (u32) X); - A = (u32) tmp; + tmp = (u32) DST; + do_div(tmp, (u32) SRC); + DST = (u32) tmp; CONT; ALU64_DIV_K: - do_div(A, K); + do_div(DST, IMM); CONT; ALU_DIV_K: - tmp = (u32) A; - do_div(tmp, (u32) K); - A = (u32) tmp; + tmp = (u32) DST; + do_div(tmp, (u32) IMM); + DST = (u32) tmp; CONT; ALU_END_TO_BE: - switch (K) { + switch (IMM) { case 16: - A = (__force u16) cpu_to_be16(A); + DST = (__force u16) cpu_to_be16(DST); break; case 32: - A = (__force u32) cpu_to_be32(A); + DST = (__force u32) cpu_to_be32(DST); break; case 64: - A = (__force u64) cpu_to_be64(A); + DST = (__force u64) cpu_to_be64(DST); break; } CONT; ALU_END_TO_LE: - switch (K) { + switch (IMM) { case 16: - A = (__force u16) cpu_to_le16(A); + DST = (__force u16) cpu_to_le16(DST); break; case 32: - A = (__force u32) cpu_to_le32(A); + DST = (__force u32) cpu_to_le32(DST); break; case 64: - A = (__force u64) cpu_to_le64(A); + DST = (__force u64) cpu_to_le64(DST); break; } CONT; @@ -401,85 +401,85 @@ select_insn: insn += insn->off; CONT; JMP_JEQ_X: - if (A == X) { + if (DST == SRC) { insn += insn->off; CONT_JMP; } CONT; JMP_JEQ_K: - if (A == K) { + if (DST == IMM) { insn += insn->off; CONT_JMP; } CONT; JMP_JNE_X: - if (A != X) { + if (DST != SRC) { insn += insn->off; CONT_JMP; } CONT; JMP_JNE_K: - if (A != K) { + if (DST != IMM) { insn += insn->off; CONT_JMP; } CONT; JMP_JGT_X: - if (A > X) { + if (DST > SRC) { insn += insn->off; CONT_JMP; } CONT; JMP_JGT_K: - if (A > K) { + if (DST > IMM) { insn += insn->off; CONT_JMP; } CONT; JMP_JGE_X: - if (A >= X) { + if (DST >= SRC) { insn += insn->off; CONT_JMP; } CONT; JMP_JGE_K: - if (A >= K) { + if (DST >= IMM) { insn += insn->off; CONT_JMP; } CONT; JMP_JSGT_X: - if (((s64) A) > ((s64) X)) { + if (((s64) DST) > ((s64) SRC)) { insn += insn->off; CONT_JMP; } CONT; JMP_JSGT_K: - if (((s64) A) > ((s64) K)) { + if (((s64) DST) > ((s64) IMM)) { insn += insn->off; CONT_JMP; } CONT; JMP_JSGE_X: - if (((s64) A) >= ((s64) X)) { + if (((s64) DST) >= ((s64) SRC)) { insn += insn->off; CONT_JMP; } CONT; JMP_JSGE_K: - if (((s64) A) >= ((s64) K)) { + if (((s64) DST) >= ((s64) IMM)) { insn += insn->off; CONT_JMP; } CONT; JMP_JSET_X: - if (A & X) { + if (DST & SRC) { insn += insn->off; CONT_JMP; } CONT; JMP_JSET_K: - if (A & K) { + if (DST & IMM) { insn += insn->off; CONT_JMP; } @@ -488,15 +488,15 @@ select_insn: return BPF_R0; /* STX and ST and LDX*/ -#define LDST(SIZEOP, SIZE) \ - STX_MEM_##SIZEOP: \ - *(SIZE *)(unsigned long) (A + insn->off) = X; \ - CONT; \ - ST_MEM_##SIZEOP: \ - *(SIZE *)(unsigned long) (A + insn->off) = K; \ - CONT; \ - LDX_MEM_##SIZEOP: \ - A = *(SIZE *)(unsigned long) (X + insn->off); \ +#define LDST(SIZEOP, SIZE) \ + STX_MEM_##SIZEOP: \ + *(SIZE *)(unsigned long) (DST + insn->off) = SRC; \ + CONT; \ + ST_MEM_##SIZEOP: \ + *(SIZE *)(unsigned long) (DST + insn->off) = IMM; \ + CONT; \ + LDX_MEM_##SIZEOP: \ + DST = *(SIZE *)(unsigned long) (SRC + insn->off); \ CONT; LDST(B, u8) @@ -504,16 +504,16 @@ select_insn: LDST(W, u32) LDST(DW, u64) #undef LDST - STX_XADD_W: /* lock xadd *(u32 *)(A + insn->off) += X */ - atomic_add((u32) X, (atomic_t *)(unsigned long) - (A + insn->off)); + STX_XADD_W: /* lock xadd *(u32 *)(dst_reg + off16) += src_reg */ + atomic_add((u32) SRC, (atomic_t *)(unsigned long) + (DST + insn->off)); CONT; - STX_XADD_DW: /* lock xadd *(u64 *)(A + insn->off) += X */ - atomic64_add((u64) X, (atomic64_t *)(unsigned long) - (A + insn->off)); + STX_XADD_DW: /* lock xadd *(u64 *)(dst_reg + off16) += src_reg */ + atomic64_add((u64) SRC, (atomic64_t *)(unsigned long) + (DST + insn->off)); CONT; - LD_ABS_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + K)) */ - off = K; + LD_ABS_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + imm32)) */ + off = IMM; load_word: /* BPF_LD + BPD_ABS and BPF_LD + BPF_IND insns are * only appearing in the programs where ctx == @@ -527,51 +527,51 @@ load_word: * BPF_R6-BPF_R9, and store return value into BPF_R0. * * Implicit input: - * ctx + * ctx == skb == BPF_R6 == CTX * * Explicit input: - * X == any register - * K == 32-bit immediate + * SRC == any register + * IMM == 32-bit immediate * * Output: * BPF_R0 - 8/16/32-bit skb data converted to cpu endianness */ - ptr = load_pointer((struct sk_buff *) ctx, off, 4, &tmp); + ptr = load_pointer((struct sk_buff *) CTX, off, 4, &tmp); if (likely(ptr != NULL)) { BPF_R0 = get_unaligned_be32(ptr); CONT; } return 0; - LD_ABS_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + K)) */ - off = K; + LD_ABS_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + imm32)) */ + off = IMM; load_half: - ptr = load_pointer((struct sk_buff *) ctx, off, 2, &tmp); + ptr = load_pointer((struct sk_buff *) CTX, off, 2, &tmp); if (likely(ptr != NULL)) { BPF_R0 = get_unaligned_be16(ptr); CONT; } return 0; - LD_ABS_B: /* BPF_R0 = *(u8 *) (ctx + K) */ - off = K; + LD_ABS_B: /* BPF_R0 = *(u8 *) (skb->data + imm32) */ + off = IMM; load_byte: - ptr = load_pointer((struct sk_buff *) ctx, off, 1, &tmp); + ptr = load_pointer((struct sk_buff *) CTX, off, 1, &tmp); if (likely(ptr != NULL)) { BPF_R0 = *(u8 *)ptr; CONT; } return 0; - LD_IND_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + X + K)) */ - off = K + X; + LD_IND_W: /* BPF_R0 = ntohl(*(u32 *) (skb->data + src_reg + imm32)) */ + off = IMM + SRC; goto load_word; - LD_IND_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + X + K)) */ - off = K + X; + LD_IND_H: /* BPF_R0 = ntohs(*(u16 *) (skb->data + src_reg + imm32)) */ + off = IMM + SRC; goto load_half; - LD_IND_B: /* BPF_R0 = *(u8 *) (skb->data + X + K) */ - off = K + X; + LD_IND_B: /* BPF_R0 = *(u8 *) (skb->data + src_reg + imm32) */ + off = IMM + SRC; goto load_byte; default_label: @@ -675,7 +675,7 @@ static bool convert_bpf_extensions(struct sock_filter *fp, case SKF_AD_OFF + SKF_AD_PROTOCOL: BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, protocol) != 2); - /* A = *(u16 *) (ctx + offsetof(protocol)) */ + /* A = *(u16 *) (CTX + offsetof(protocol)) */ *insn++ = BPF_LDX_MEM(BPF_H, BPF_REG_A, BPF_REG_CTX, offsetof(struct sk_buff, protocol)); /* A = ntohs(A) [emitting a nop or swap16] */ @@ -741,7 +741,7 @@ static bool convert_bpf_extensions(struct sock_filter *fp, BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, vlan_tci) != 2); BUILD_BUG_ON(VLAN_TAG_PRESENT != 0x1000); - /* A = *(u16 *) (ctx + offsetof(vlan_tci)) */ + /* A = *(u16 *) (CTX + offsetof(vlan_tci)) */ *insn++ = BPF_LDX_MEM(BPF_H, BPF_REG_A, BPF_REG_CTX, offsetof(struct sk_buff, vlan_tci)); if (fp->k == SKF_AD_OFF + SKF_AD_VLAN_TAG) { @@ -760,13 +760,13 @@ static bool convert_bpf_extensions(struct sock_filter *fp, case SKF_AD_OFF + SKF_AD_NLATTR_NEST: case SKF_AD_OFF + SKF_AD_CPU: case SKF_AD_OFF + SKF_AD_RANDOM: - /* arg1 = ctx */ + /* arg1 = CTX */ *insn++ = BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_CTX); /* arg2 = A */ *insn++ = BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_A); /* arg3 = X */ *insn++ = BPF_MOV64_REG(BPF_REG_ARG3, BPF_REG_X); - /* Emit call(ctx, arg2=A, arg3=X) */ + /* Emit call(arg1=CTX, arg2=A, arg3=X) */ switch (fp->k) { case SKF_AD_OFF + SKF_AD_PAY_OFFSET: *insn = BPF_EMIT_CALL(__skb_get_pay_offset); @@ -941,12 +941,12 @@ do_pass: */ *insn++ = BPF_MOV32_IMM(BPF_REG_TMP, fp->k); - insn->a_reg = BPF_REG_A; - insn->x_reg = BPF_REG_TMP; + insn->dst_reg = BPF_REG_A; + insn->src_reg = BPF_REG_TMP; bpf_src = BPF_X; } else { - insn->a_reg = BPF_REG_A; - insn->x_reg = BPF_REG_X; + insn->dst_reg = BPF_REG_A; + insn->src_reg = BPF_REG_X; insn->imm = fp->k; bpf_src = BPF_SRC(fp->code); } -- cgit v1.2.3 From 6d1d14d5ce3e7880f91e7cfbdeca88128fe741ca Mon Sep 17 00:00:00 2001 From: Emilio López Date: Tue, 13 May 2014 13:29:26 -0300 Subject: clk: sunxi: document new A31 USB clock compatible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Support for the USB gates and resets on A31 has been recently added using a new compatible, so let's document it here. Signed-off-by: Emilio López --- Documentation/devicetree/bindings/clock/sunxi.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index a5160d8cbb5f..1f6d3f470c36 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -41,6 +41,7 @@ Required properties: "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 + "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 Required properties for all clocks: - reg : shall be the control register address for the clock. -- cgit v1.2.3 From 5c89a8b65760a60eea38e0b172d04152ec03a067 Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Thu, 15 May 2014 10:55:12 +0200 Subject: clk: sunxi: document PRCM clock compatible strings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Document new compatible strings for clock provided by the PRCM (Power/Reset/Clock Management) unit. Signed-off-by: Boris BREZILLON Signed-off-by: Emilio López --- Documentation/devicetree/bindings/clock/sunxi.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 1f6d3f470c36..b9ec668bfe62 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -20,12 +20,15 @@ Required properties: "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13 "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20 + "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31 "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31 "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31 "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock + "allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31 "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10 "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13 "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s + "allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31 "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20 "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing -- cgit v1.2.3 From e4ad403269ff0ecdfb137b2a72349c30941cec7a Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Tue, 10 Jun 2014 17:44:06 +0200 Subject: net: filter: mention eBPF terminology as well Since the term eBPF is used anyway on mailing list discussions, lets also document that in the main BPF documentation file and replace a couple of occurrences with eBPF terminology to be more clear. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 85 +++++++++++++++++++------------------ 1 file changed, 43 insertions(+), 42 deletions(-) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 9f49b8690500..1c7fc6baed84 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -561,42 +561,43 @@ toolchain for developing and testing the kernel's JIT compiler. BPF kernel internals -------------------- -Internally, for the kernel interpreter, a different BPF instruction set +Internally, for the kernel interpreter, a different instruction set format with similar underlying principles from BPF described in previous paragraphs is being used. However, the instruction set format is modelled closer to the underlying architecture to mimic native instruction sets, so -that a better performance can be achieved (more details later). +that a better performance can be achieved (more details later). This new +ISA is called 'eBPF' or 'internal BPF' interchangeably. (Note: eBPF which +originates from [e]xtended BPF is not the same as BPF extensions! While +eBPF is an ISA, BPF extensions date back to classic BPF's 'overloading' +of BPF_LD | BPF_{B,H,W} | BPF_ABS instruction.) It is designed to be JITed with one to one mapping, which can also open up -the possibility for GCC/LLVM compilers to generate optimized BPF code through -a BPF backend that performs almost as fast as natively compiled code. +the possibility for GCC/LLVM compilers to generate optimized eBPF code through +an eBPF backend that performs almost as fast as natively compiled code. The new instruction set was originally designed with the possible goal in -mind to write programs in "restricted C" and compile into BPF with a optional +mind to write programs in "restricted C" and compile into eBPF with a optional GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with -minimal performance overhead over two steps, that is, C -> BPF -> native code. +minimal performance overhead over two steps, that is, C -> eBPF -> native code. Currently, the new format is being used for running user BPF programs, which includes seccomp BPF, classic socket filters, cls_bpf traffic classifier, team driver's classifier for its load-balancing mode, netfilter's xt_bpf extension, PTP dissector/classifier, and much more. They are all internally converted by the kernel into the new instruction set representation and run -in the extended interpreter. For in-kernel handlers, this all works -transparently by using sk_unattached_filter_create() for setting up the -filter, resp. sk_unattached_filter_destroy() for destroying it. The macro -SK_RUN_FILTER(filter, ctx) transparently invokes the right BPF function to -run the filter. 'filter' is a pointer to struct sk_filter that we got from -sk_unattached_filter_create(), and 'ctx' the given context (e.g. skb pointer). -All constraints and restrictions from sk_chk_filter() apply before a -conversion to the new layout is being done behind the scenes! - -Currently, for JITing, the user BPF format is being used and current BPF JIT -compilers reused whenever possible. In other words, we do not (yet!) perform -a JIT compilation in the new layout, however, future work will successively -migrate traditional JIT compilers into the new instruction format as well, so -that they will profit from the very same benefits. Thus, when speaking about -JIT in the following, a JIT compiler (TBD) for the new instruction format is -meant in this context. +in the eBPF interpreter. For in-kernel handlers, this all works transparently +by using sk_unattached_filter_create() for setting up the filter, resp. +sk_unattached_filter_destroy() for destroying it. The macro +SK_RUN_FILTER(filter, ctx) transparently invokes eBPF interpreter or JITed +code to run the filter. 'filter' is a pointer to struct sk_filter that we +got from sk_unattached_filter_create(), and 'ctx' the given context (e.g. +skb pointer). All constraints and restrictions from sk_chk_filter() apply +before a conversion to the new layout is being done behind the scenes! + +Currently, the classic BPF format is being used for JITing on most of the +architectures. Only x86-64 performs JIT compilation from eBPF instruction set, +however, future work will migrate other JIT compilers as well, so that they +will profit from the very same benefits. Some core changes of the new internal format: @@ -605,35 +606,35 @@ Some core changes of the new internal format: The old format had two registers A and X, and a hidden frame pointer. The new layout extends this to be 10 internal registers and a read-only frame pointer. Since 64-bit CPUs are passing arguments to functions via registers - the number of args from BPF program to in-kernel function is restricted + the number of args from eBPF program to in-kernel function is restricted to 5 and one register is used to accept return value from an in-kernel function. Natively, x86_64 passes first 6 arguments in registers, aarch64/ sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers. - Therefore, BPF calling convention is defined as: + Therefore, eBPF calling convention is defined as: - * R0 - return value from in-kernel function, and exit value for BPF program - * R1 - R5 - arguments from BPF program to in-kernel function + * R0 - return value from in-kernel function, and exit value for eBPF program + * R1 - R5 - arguments from eBPF program to in-kernel function * R6 - R9 - callee saved registers that in-kernel function will preserve * R10 - read-only frame pointer to access stack - Thus, all BPF registers map one to one to HW registers on x86_64, aarch64, - etc, and BPF calling convention maps directly to ABIs used by the kernel on + Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64, + etc, and eBPF calling convention maps directly to ABIs used by the kernel on 64-bit architectures. On 32-bit architectures JIT may map programs that use only 32-bit arithmetic and may let more complex programs to be interpreted. - R0 - R5 are scratch registers and BPF program needs spill/fill them if - necessary across calls. Note that there is only one BPF program (== one BPF - main routine) and it cannot call other BPF functions, it can only call - predefined in-kernel functions, though. + R0 - R5 are scratch registers and eBPF program needs spill/fill them if + necessary across calls. Note that there is only one eBPF program (== one + eBPF main routine) and it cannot call other eBPF functions, it can only + call predefined in-kernel functions, though. - Register width increases from 32-bit to 64-bit: Still, the semantics of the original 32-bit ALU operations are preserved - via 32-bit subregisters. All BPF registers are 64-bit with 32-bit lower + via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower subregisters that zero-extend into 64-bit if they are being written to. That behavior maps directly to x86_64 and arm64 subregister definition, but makes other JITs more difficult. @@ -644,8 +645,8 @@ Some core changes of the new internal format: Operation is 64-bit, because on 64-bit architectures, pointers are also 64-bit wide, and we want to pass 64-bit values in/out of kernel functions, - so 32-bit BPF registers would otherwise require to define register-pair - ABI, thus, there won't be able to use a direct BPF register to HW register + so 32-bit eBPF registers would otherwise require to define register-pair + ABI, thus, there won't be able to use a direct eBPF register to HW register mapping and JIT would need to do combine/split/move operations for every register in and out of the function, which is complex, bug prone and slow. Another reason is the use of atomic 64-bit counters. @@ -690,7 +691,7 @@ Some core changes of the new internal format: subq %rsi, %rax ret - Function f2 in BPF may look like: + Function f2 in eBPF may look like: f2: bpf_mov R2, R1 @@ -702,7 +703,7 @@ Some core changes of the new internal format: returns will be seamless. Without JIT, __sk_run_filter() interpreter needs to be used to call into f2. - For practical reasons all BPF programs have only one argument 'ctx' which is + For practical reasons all eBPF programs have only one argument 'ctx' which is already placed into R1 (e.g. on __sk_run_filter() startup) and the programs can call kernel functions with up to 5 arguments. Calls with 6 or more arguments are currently not supported, but these restrictions can be lifted if necessary @@ -779,9 +780,9 @@ Some core changes of the new internal format: In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper - registers and place their return value into '%rax' which is R0 in BPF. + registers and place their return value into '%rax' which is R0 in eBPF. Prologue and epilogue are emitted by JIT and are implicit in the - interpreter. R0-R5 are scratch registers, so BPF program needs to preserve + interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve them across the calls as defined by calling convention. For example the following program is invalid: @@ -792,12 +793,12 @@ Some core changes of the new internal format: bpf_exit After the call the registers R1-R5 contain junk values and cannot be read. - In the future a BPF verifier can be used to validate internal BPF programs. + In the future an eBPF verifier can be used to validate internal BPF programs. -Also in the new design, BPF is limited to 4096 insns, which means that any +Also in the new design, eBPF is limited to 4096 insns, which means that any program will terminate quickly and will only call a fixed number of kernel functions. Original BPF and the new format are two operand instructions, -which helps to do one-to-one mapping between BPF insn and x86 insn during JIT. +which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT. The input context pointer for invoking the interpreter function is generic, its content is defined by a specific use case. For seccomp register R1 points -- cgit v1.2.3 From 783e327b69e24924055359a4e5779d04c052974a Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Tue, 10 Jun 2014 17:44:07 +0200 Subject: net: filter: document internal instruction encoding This patch adds a description of eBPFs instruction encoding in order to bring the documentation in line with the implementation. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 161 ++++++++++++++++++++++++++++++++++++ 1 file changed, 161 insertions(+) (limited to 'Documentation') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 1c7fc6baed84..ee78eba78a9d 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -834,6 +834,167 @@ loops and other CFG validation; second step starts from the first insn and descends all possible paths. It simulates execution of every insn and observes the state change of registers and stack. +eBPF opcode encoding +-------------------- + +eBPF is reusing most of the opcode encoding from classic to simplify conversion +of classic BPF to eBPF. For arithmetic and jump instructions the 8-bit 'code' +field is divided into three parts: + + +----------------+--------+--------------------+ + | 4 bits | 1 bit | 3 bits | + | operation code | source | instruction class | + +----------------+--------+--------------------+ + (MSB) (LSB) + +Three LSB bits store instruction class which is one of: + + Classic BPF classes: eBPF classes: + + BPF_LD 0x00 BPF_LD 0x00 + BPF_LDX 0x01 BPF_LDX 0x01 + BPF_ST 0x02 BPF_ST 0x02 + BPF_STX 0x03 BPF_STX 0x03 + BPF_ALU 0x04 BPF_ALU 0x04 + BPF_JMP 0x05 BPF_JMP 0x05 + BPF_RET 0x06 [ class 6 unused, for future if needed ] + BPF_MISC 0x07 BPF_ALU64 0x07 + +When BPF_CLASS(code) == BPF_ALU or BPF_JMP, 4th bit encodes source operand ... + + BPF_K 0x00 + BPF_X 0x08 + + * in classic BPF, this means: + + BPF_SRC(code) == BPF_X - use register X as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + + * in eBPF, this means: + + BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + +... and four MSB bits store operation code. + +If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of: + + BPF_ADD 0x00 + BPF_SUB 0x10 + BPF_MUL 0x20 + BPF_DIV 0x30 + BPF_OR 0x40 + BPF_AND 0x50 + BPF_LSH 0x60 + BPF_RSH 0x70 + BPF_NEG 0x80 + BPF_MOD 0x90 + BPF_XOR 0xa0 + BPF_MOV 0xb0 /* eBPF only: mov reg to reg */ + BPF_ARSH 0xc0 /* eBPF only: sign extending shift right */ + BPF_END 0xd0 /* eBPF only: endianness conversion */ + +If BPF_CLASS(code) == BPF_JMP, BPF_OP(code) is one of: + + BPF_JA 0x00 + BPF_JEQ 0x10 + BPF_JGT 0x20 + BPF_JGE 0x30 + BPF_JSET 0x40 + BPF_JNE 0x50 /* eBPF only: jump != */ + BPF_JSGT 0x60 /* eBPF only: signed '>' */ + BPF_JSGE 0x70 /* eBPF only: signed '>=' */ + BPF_CALL 0x80 /* eBPF only: function call */ + BPF_EXIT 0x90 /* eBPF only: function return */ + +So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF +and eBPF. There are only two registers in classic BPF, so it means A += X. +In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly, +BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous +src_reg = (u32) src_reg ^ (u32) imm32 in eBPF. + +Classic BPF is using BPF_MISC class to represent A = X and X = A moves. +eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no +BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean +exactly the same operations as BPF_ALU, but with 64-bit wide operands +instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.: +dst_reg = dst_reg + src_reg + +Classic BPF wastes the whole BPF_RET class to represent a single 'ret' +operation. Classic BPF_RET | BPF_K means copy imm32 into return register +and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT +in eBPF means function exit only. The eBPF program needs to store return +value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is currently +unused and reserved for future use. + +For load and store instructions the 8-bit 'code' field is divided as: + + +--------+--------+-------------------+ + | 3 bits | 2 bits | 3 bits | + | mode | size | instruction class | + +--------+--------+-------------------+ + (MSB) (LSB) + +Size modifier is one of ... + + BPF_W 0x00 /* word */ + BPF_H 0x08 /* half word */ + BPF_B 0x10 /* byte */ + BPF_DW 0x18 /* eBPF only, double word */ + +... which encodes size of load/store operation: + + B - 1 byte + H - 2 byte + W - 4 byte + DW - 8 byte (eBPF only) + +Mode modifier is one of: + + BPF_IMM 0x00 /* classic BPF only, reserved in eBPF */ + BPF_ABS 0x20 + BPF_IND 0x40 + BPF_MEM 0x60 + BPF_LEN 0x80 /* classic BPF only, reserved in eBPF */ + BPF_MSH 0xa0 /* classic BPF only, reserved in eBPF */ + BPF_XADD 0xc0 /* eBPF only, exclusive add */ + +eBPF has two non-generic instructions: (BPF_ABS | | BPF_LD) and +(BPF_IND | | BPF_LD) which are used to access packet data. + +They had to be carried over from classic to have strong performance of +socket filters running in eBPF interpreter. These instructions can only +be used when interpreter context is a pointer to 'struct sk_buff' and +have seven implicit operands. Register R6 is an implicit input that must +contain pointer to sk_buff. Register R0 is an implicit output which contains +the data fetched from the packet. Registers R1-R5 are scratch registers +and must not be used to store the data across BPF_ABS | BPF_LD or +BPF_IND | BPF_LD instructions. + +These instructions have implicit program exit condition as well. When +eBPF program is trying to access the data beyond the packet boundary, +the interpreter will abort the execution of the program. JIT compilers +therefore must preserve this property. src_reg and imm32 fields are +explicit inputs to these instructions. + +For example: + + BPF_IND | BPF_W | BPF_LD means: + + R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32)) + and R1 - R5 were scratched. + +Unlike classic BPF instruction set, eBPF has generic load/store operations: + +BPF_MEM | | BPF_STX: *(size *) (dst_reg + off) = src_reg +BPF_MEM | | BPF_ST: *(size *) (dst_reg + off) = imm32 +BPF_MEM | | BPF_LDX: dst_reg = *(size *) (src_reg + off) +BPF_XADD | BPF_W | BPF_STX: lock xadd *(u32 *)(dst_reg + off16) += src_reg +BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg + +Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and +2 byte atomic increments are not supported. + Testing ------- -- cgit v1.2.3 From 1a539d372edd9832444e7a3daa710c444c014dc9 Mon Sep 17 00:00:00 2001 From: Tomas Pop Date: Thu, 5 Jun 2014 15:24:19 -0700 Subject: hwmon: add support for Sensirion SHTC1 sensor Add support for Sensirion SHTC1 and compatible temperature and humidity sensors. Signed-off-by: Tomas Pop Signed-off-by: Guenter Roeck --- Documentation/hwmon/shtc1 | 43 ++++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/shtc1.c | 251 ++++++++++++++++++++++++++++++++++++ include/linux/platform_data/shtc1.h | 23 ++++ 5 files changed, 328 insertions(+) create mode 100644 Documentation/hwmon/shtc1 create mode 100644 drivers/hwmon/shtc1.c create mode 100644 include/linux/platform_data/shtc1.h (limited to 'Documentation') diff --git a/Documentation/hwmon/shtc1 b/Documentation/hwmon/shtc1 new file mode 100644 index 000000000000..6b1e05458f0f --- /dev/null +++ b/Documentation/hwmon/shtc1 @@ -0,0 +1,43 @@ +Kernel driver shtc1 +=================== + +Supported chips: + * Sensirion SHTC1 + Prefix: 'shtc1' + Addresses scanned: none + Datasheet: http://www.sensirion.com/file/datasheet_shtc1 + + * Sensirion SHTW1 + Prefix: 'shtw1' + Addresses scanned: none + Datasheet: Not publicly available + +Author: + Johannes Winkelmann + +Description +----------- + +This driver implements support for the Sensirion SHTC1 chip, a humidity and +temperature sensor. Temperature is measured in degrees celsius, relative +humidity is expressed as a percentage. Driver can be used as well for SHTW1 +chip, which has the same electrical interface. + +The device communicates with the I2C protocol. All sensors are set to I2C +address 0x70. See Documentation/i2c/instantiating-devices for methods to +instantiate the device. + +There are two options configurable by means of shtc1_platform_data: +1. blocking (pull the I2C clock line down while performing the measurement) or + non-blocking mode. Blocking mode will guarantee the fastest result but + the I2C bus will be busy during that time. By default, non-blocking mode + is used. Make sure clock-stretching works properly on your device if you + want to use blocking mode. +2. high or low accuracy. High accuracy is used by default and using it is + strongly recommended. + +sysfs-Interface +--------------- + +temp1_input - temperature input +humidity1_input - humidity input diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 00343166feb1..08531a128f53 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1124,6 +1124,16 @@ config SENSORS_SHT21 This driver can also be built as a module. If so, the module will be called sht21. +config SENSORS_SHTC1 + tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." + depends on I2C + help + If you say yes here you get support for the Sensiron SHTC1 and SHTW1 + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called shtc1. + config SENSORS_S3C tristate "Samsung built-in ADC" depends on S3C_ADC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 11798ad7e801..3dc0f02f71d2 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o obj-$(CONFIG_SENSORS_SCH5636) += sch5636.o obj-$(CONFIG_SENSORS_SHT15) += sht15.o obj-$(CONFIG_SENSORS_SHT21) += sht21.o +obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMM665) += smm665.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o diff --git a/drivers/hwmon/shtc1.c b/drivers/hwmon/shtc1.c new file mode 100644 index 000000000000..decd7df995ab --- /dev/null +++ b/drivers/hwmon/shtc1.c @@ -0,0 +1,251 @@ +/* Sensirion SHTC1 humidity and temperature sensor driver + * + * Copyright (C) 2014 Sensirion AG, Switzerland + * Author: Johannes Winkelmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* commands (high precision mode) */ +static const unsigned char shtc1_cmd_measure_blocking_hpm[] = { 0x7C, 0xA2 }; +static const unsigned char shtc1_cmd_measure_nonblocking_hpm[] = { 0x78, 0x66 }; + +/* commands (low precision mode) */ +static const unsigned char shtc1_cmd_measure_blocking_lpm[] = { 0x64, 0x58 }; +static const unsigned char shtc1_cmd_measure_nonblocking_lpm[] = { 0x60, 0x9c }; + +/* command for reading the ID register */ +static const unsigned char shtc1_cmd_read_id_reg[] = { 0xef, 0xc8 }; + +/* constants for reading the ID register */ +#define SHTC1_ID 0x07 +#define SHTC1_ID_REG_MASK 0x1f + +/* delays for non-blocking i2c commands, both in us */ +#define SHTC1_NONBLOCKING_WAIT_TIME_HPM 14400 +#define SHTC1_NONBLOCKING_WAIT_TIME_LPM 1000 + +#define SHTC1_CMD_LENGTH 2 +#define SHTC1_RESPONSE_LENGTH 6 + +struct shtc1_data { + struct i2c_client *client; + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + const unsigned char *command; + unsigned int nonblocking_wait_time; /* in us */ + + struct shtc1_platform_data setup; + + int temperature; /* 1000 * temperature in dgr C */ + int humidity; /* 1000 * relative humidity in %RH */ +}; + +static int shtc1_update_values(struct i2c_client *client, + struct shtc1_data *data, + char *buf, int bufsize) +{ + int ret = i2c_master_send(client, data->command, SHTC1_CMD_LENGTH); + if (ret != SHTC1_CMD_LENGTH) { + dev_err(&client->dev, "failed to send command: %d\n", ret); + return ret < 0 ? ret : -EIO; + } + + /* + * In blocking mode (clock stretching mode) the I2C bus + * is blocked for other traffic, thus the call to i2c_master_recv() + * will wait until the data is ready. For non blocking mode, we + * have to wait ourselves. + */ + if (!data->setup.blocking_io) + usleep_range(data->nonblocking_wait_time, + data->nonblocking_wait_time + 1000); + + ret = i2c_master_recv(client, buf, bufsize); + if (ret != bufsize) { + dev_err(&client->dev, "failed to read values: %d\n", ret); + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +/* sysfs attributes */ +static struct shtc1_data *shtc1_update_client(struct device *dev) +{ + struct shtc1_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned char buf[SHTC1_RESPONSE_LENGTH]; + int val; + int ret = 0; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { + ret = shtc1_update_values(client, data, buf, sizeof(buf)); + if (ret) + goto out; + + /* + * From datasheet: + * T = -45 + 175 * ST / 2^16 + * RH = 100 * SRH / 2^16 + * + * Adapted for integer fixed point (3 digit) arithmetic. + */ + val = be16_to_cpup((__be16 *)buf); + data->temperature = ((21875 * val) >> 13) - 45000; + val = be16_to_cpup((__be16 *)(buf + 3)); + data->humidity = ((12500 * val) >> 13); + + data->last_updated = jiffies; + data->valid = true; + } + +out: + mutex_unlock(&data->update_lock); + + return ret == 0 ? data : ERR_PTR(ret); +} + +static ssize_t temp1_input_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct shtc1_data *data = shtc1_update_client(dev); + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->temperature); +} + +static ssize_t humidity1_input_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct shtc1_data *data = shtc1_update_client(dev); + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", data->humidity); +} + +static DEVICE_ATTR_RO(temp1_input); +static DEVICE_ATTR_RO(humidity1_input); + +static struct attribute *shtc1_attrs[] = { + &dev_attr_temp1_input.attr, + &dev_attr_humidity1_input.attr, + NULL +}; + +ATTRIBUTE_GROUPS(shtc1); + +static void shtc1_select_command(struct shtc1_data *data) +{ + if (data->setup.high_precision) { + data->command = data->setup.blocking_io ? + shtc1_cmd_measure_blocking_hpm : + shtc1_cmd_measure_nonblocking_hpm; + data->nonblocking_wait_time = SHTC1_NONBLOCKING_WAIT_TIME_HPM; + + } else { + data->command = data->setup.blocking_io ? + shtc1_cmd_measure_blocking_lpm : + shtc1_cmd_measure_nonblocking_lpm; + data->nonblocking_wait_time = SHTC1_NONBLOCKING_WAIT_TIME_LPM; + } +} + +static int shtc1_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + char id_reg[2]; + struct shtc1_data *data; + struct device *hwmon_dev; + struct i2c_adapter *adap = client->adapter; + struct device *dev = &client->dev; + + if (!i2c_check_functionality(adap, I2C_FUNC_I2C)) { + dev_err(dev, "plain i2c transactions not supported\n"); + return -ENODEV; + } + + ret = i2c_master_send(client, shtc1_cmd_read_id_reg, SHTC1_CMD_LENGTH); + if (ret != SHTC1_CMD_LENGTH) { + dev_err(dev, "could not send read_id_reg command: %d\n", ret); + return ret < 0 ? ret : -ENODEV; + } + ret = i2c_master_recv(client, id_reg, sizeof(id_reg)); + if (ret != sizeof(id_reg)) { + dev_err(dev, "could not read ID register: %d\n", ret); + return -ENODEV; + } + if ((id_reg[1] & SHTC1_ID_REG_MASK) != SHTC1_ID) { + dev_err(dev, "ID register doesn't match\n"); + return -ENODEV; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->setup.blocking_io = false; + data->setup.high_precision = true; + data->client = client; + + if (client->dev.platform_data) + data->setup = *(struct shtc1_platform_data *)dev->platform_data; + shtc1_select_command(data); + mutex_init(&data->update_lock); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + client->name, + data, + shtc1_groups); + if (IS_ERR(hwmon_dev)) + dev_dbg(dev, "unable to register hwmon device\n"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +/* device ID table */ +static const struct i2c_device_id shtc1_id[] = { + { "shtc1", 0 }, + { "shtw1", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, shtc1_id); + +static struct i2c_driver shtc1_i2c_driver = { + .driver.name = "shtc1", + .probe = shtc1_probe, + .id_table = shtc1_id, +}; + +module_i2c_driver(shtc1_i2c_driver); + +MODULE_AUTHOR("Johannes Winkelmann "); +MODULE_DESCRIPTION("Sensirion SHTC1 humidity and temperature sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/shtc1.h b/include/linux/platform_data/shtc1.h new file mode 100644 index 000000000000..7b8c353f7dc8 --- /dev/null +++ b/include/linux/platform_data/shtc1.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Sensirion AG, Switzerland + * Author: Johannes Winkelmann + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SHTC1_H_ +#define __SHTC1_H_ + +struct shtc1_platform_data { + bool blocking_io; + bool high_precision; +}; +#endif /* __SHTC1_H_ */ -- cgit v1.2.3 From 6e8f21584a30ba6ce73cfef34f316d5bf3fadaab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Thu, 12 Jun 2014 17:53:09 -0700 Subject: x86/vdso/doc: Rename vdso_test.c to vdso_standalone_test_x86.c This thing is hopelessly x86_64-specific: it's an example of how to access the vDSO without any runtime support at all. Signed-off-by: Andy Lutomirski Link: http://lkml.kernel.org/r/3efc170e0e166e15f0150c9fdb37d52488b9c0a4.1402620737.git.luto@amacapital.net Signed-off-by: H. Peter Anvin --- Documentation/vDSO/vdso_standalone_test_x86.c | 111 ++++++++++++++++++++++++++ Documentation/vDSO/vdso_test.c | 111 -------------------------- 2 files changed, 111 insertions(+), 111 deletions(-) create mode 100644 Documentation/vDSO/vdso_standalone_test_x86.c delete mode 100644 Documentation/vDSO/vdso_test.c (limited to 'Documentation') diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c new file mode 100644 index 000000000000..1523f5d681f3 --- /dev/null +++ b/Documentation/vDSO/vdso_standalone_test_x86.c @@ -0,0 +1,111 @@ +/* + * vdso_test.c: Sample code to test parse_vdso.c on x86_64 + * Copyright (c) 2011 Andy Lutomirski + * Subject to the GNU General Public License, version 2 + * + * You can amuse yourself by compiling with: + * gcc -std=gnu99 -nostdlib + * -Os -fno-asynchronous-unwind-tables -flto + * vdso_standalone_test_x86.c parse_vdso.c + * to generate a small binary with no dependencies at all. + */ + +#include +#include +#include +#include + +extern void *vdso_sym(const char *version, const char *name); +extern void vdso_init_from_sysinfo_ehdr(uintptr_t base); +extern void vdso_init_from_auxv(void *auxv); + +/* We need a libc functions... */ +int strcmp(const char *a, const char *b) +{ + /* This implementation is buggy: it never returns -1. */ + while (*a || *b) { + if (*a != *b) + return 1; + if (*a == 0 || *b == 0) + return 1; + a++; + b++; + } + + return 0; +} + +/* ...and two syscalls. This is x86_64-specific. */ +static inline long linux_write(int fd, const void *data, size_t len) +{ + + long ret; + asm volatile ("syscall" : "=a" (ret) : "a" (__NR_write), + "D" (fd), "S" (data), "d" (len) : + "cc", "memory", "rcx", + "r8", "r9", "r10", "r11" ); + return ret; +} + +static inline void linux_exit(int code) +{ + asm volatile ("syscall" : : "a" (__NR_exit), "D" (code)); +} + +void to_base10(char *lastdig, uint64_t n) +{ + while (n) { + *lastdig = (n % 10) + '0'; + n /= 10; + lastdig--; + } +} + +__attribute__((externally_visible)) void c_main(void **stack) +{ + /* Parse the stack */ + long argc = (long)*stack; + stack += argc + 2; + + /* Now we're pointing at the environment. Skip it. */ + while(*stack) + stack++; + stack++; + + /* Now we're pointing at auxv. Initialize the vDSO parser. */ + vdso_init_from_auxv((void *)stack); + + /* Find gettimeofday. */ + typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz); + gtod_t gtod = (gtod_t)vdso_sym("LINUX_2.6", "__vdso_gettimeofday"); + + if (!gtod) + linux_exit(1); + + struct timeval tv; + long ret = gtod(&tv, 0); + + if (ret == 0) { + char buf[] = "The time is .000000\n"; + to_base10(buf + 31, tv.tv_sec); + to_base10(buf + 38, tv.tv_usec); + linux_write(1, buf, sizeof(buf) - 1); + } else { + linux_exit(ret); + } + + linux_exit(0); +} + +/* + * This is the real entry point. It passes the initial stack into + * the C entry point. + */ +asm ( + ".text\n" + ".global _start\n" + ".type _start,@function\n" + "_start:\n\t" + "mov %rsp,%rdi\n\t" + "jmp c_main" + ); diff --git a/Documentation/vDSO/vdso_test.c b/Documentation/vDSO/vdso_test.c deleted file mode 100644 index fff633432dff..000000000000 --- a/Documentation/vDSO/vdso_test.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * vdso_test.c: Sample code to test parse_vdso.c on x86_64 - * Copyright (c) 2011 Andy Lutomirski - * Subject to the GNU General Public License, version 2 - * - * You can amuse yourself by compiling with: - * gcc -std=gnu99 -nostdlib - * -Os -fno-asynchronous-unwind-tables -flto - * vdso_test.c parse_vdso.c -o vdso_test - * to generate a small binary with no dependencies at all. - */ - -#include -#include -#include -#include - -extern void *vdso_sym(const char *version, const char *name); -extern void vdso_init_from_sysinfo_ehdr(uintptr_t base); -extern void vdso_init_from_auxv(void *auxv); - -/* We need a libc functions... */ -int strcmp(const char *a, const char *b) -{ - /* This implementation is buggy: it never returns -1. */ - while (*a || *b) { - if (*a != *b) - return 1; - if (*a == 0 || *b == 0) - return 1; - a++; - b++; - } - - return 0; -} - -/* ...and two syscalls. This is x86_64-specific. */ -static inline long linux_write(int fd, const void *data, size_t len) -{ - - long ret; - asm volatile ("syscall" : "=a" (ret) : "a" (__NR_write), - "D" (fd), "S" (data), "d" (len) : - "cc", "memory", "rcx", - "r8", "r9", "r10", "r11" ); - return ret; -} - -static inline void linux_exit(int code) -{ - asm volatile ("syscall" : : "a" (__NR_exit), "D" (code)); -} - -void to_base10(char *lastdig, uint64_t n) -{ - while (n) { - *lastdig = (n % 10) + '0'; - n /= 10; - lastdig--; - } -} - -__attribute__((externally_visible)) void c_main(void **stack) -{ - /* Parse the stack */ - long argc = (long)*stack; - stack += argc + 2; - - /* Now we're pointing at the environment. Skip it. */ - while(*stack) - stack++; - stack++; - - /* Now we're pointing at auxv. Initialize the vDSO parser. */ - vdso_init_from_auxv((void *)stack); - - /* Find gettimeofday. */ - typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz); - gtod_t gtod = (gtod_t)vdso_sym("LINUX_2.6", "__vdso_gettimeofday"); - - if (!gtod) - linux_exit(1); - - struct timeval tv; - long ret = gtod(&tv, 0); - - if (ret == 0) { - char buf[] = "The time is .000000\n"; - to_base10(buf + 31, tv.tv_sec); - to_base10(buf + 38, tv.tv_usec); - linux_write(1, buf, sizeof(buf) - 1); - } else { - linux_exit(ret); - } - - linux_exit(0); -} - -/* - * This is the real entry point. It passes the initial stack into - * the C entry point. - */ -asm ( - ".text\n" - ".global _start\n" - ".type _start,@function\n" - "_start:\n\t" - "mov %rsp,%rdi\n\t" - "jmp c_main" - ); -- cgit v1.2.3 From 4ebbefd6b93c34d6da0d950b1d2e0dcca2f1e6ef Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Thu, 12 Jun 2014 17:53:10 -0700 Subject: x86/vdso/doc: Make vDSO examples more portable This adds a new vdso_test.c that's written entirely in C. It also makes all of the vDSO examples work on 32-bit x86. Cc: Stefani Seibold Signed-off-by: Andy Lutomirski Link: http://lkml.kernel.org/r/62b701fc44b79f118ac2b2d64d19965fc5c291fb.1402620737.git.luto@amacapital.net Signed-off-by: H. Peter Anvin --- Documentation/vDSO/parse_vdso.c | 67 ++++++++++++++++----------- Documentation/vDSO/vdso_standalone_test_x86.c | 45 ++++++++++++------ Documentation/vDSO/vdso_test.c | 52 +++++++++++++++++++++ 3 files changed, 123 insertions(+), 41 deletions(-) create mode 100644 Documentation/vDSO/vdso_test.c (limited to 'Documentation') diff --git a/Documentation/vDSO/parse_vdso.c b/Documentation/vDSO/parse_vdso.c index 85870208edcf..1dbb4b87268f 100644 --- a/Documentation/vDSO/parse_vdso.c +++ b/Documentation/vDSO/parse_vdso.c @@ -1,6 +1,6 @@ /* * parse_vdso.c: Linux reference vDSO parser - * Written by Andrew Lutomirski, 2011. + * Written by Andrew Lutomirski, 2011-2014. * * This code is meant to be linked in to various programs that run on Linux. * As such, it is available with as few restrictions as possible. This file @@ -11,13 +11,14 @@ * it starts a program. It works equally well in statically and dynamically * linked binaries. * - * This code is tested on x86_64. In principle it should work on any 64-bit + * This code is tested on x86. In principle it should work on any * architecture that has a vDSO. */ #include #include #include +#include #include /* @@ -45,11 +46,18 @@ extern void *vdso_sym(const char *version, const char *name); /* And here's the code. */ - -#ifndef __x86_64__ -# error Not yet ported to non-x86_64 architectures +#ifndef ELF_BITS +# if ULONG_MAX > 0xffffffffUL +# define ELF_BITS 64 +# else +# define ELF_BITS 32 +# endif #endif +#define ELF_BITS_XFORM2(bits, x) Elf##bits##_##x +#define ELF_BITS_XFORM(bits, x) ELF_BITS_XFORM2(bits, x) +#define ELF(x) ELF_BITS_XFORM(ELF_BITS, x) + static struct vdso_info { bool valid; @@ -59,14 +67,14 @@ static struct vdso_info uintptr_t load_offset; /* load_addr - recorded vaddr */ /* Symbol table */ - Elf64_Sym *symtab; + ELF(Sym) *symtab; const char *symstrings; - Elf64_Word *bucket, *chain; - Elf64_Word nbucket, nchain; + ELF(Word) *bucket, *chain; + ELF(Word) nbucket, nchain; /* Version table */ - Elf64_Versym *versym; - Elf64_Verdef *verdef; + ELF(Versym) *versym; + ELF(Verdef) *verdef; } vdso_info; /* Straight from the ELF specification. */ @@ -92,9 +100,14 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) vdso_info.load_addr = base; - Elf64_Ehdr *hdr = (Elf64_Ehdr*)base; - Elf64_Phdr *pt = (Elf64_Phdr*)(vdso_info.load_addr + hdr->e_phoff); - Elf64_Dyn *dyn = 0; + ELF(Ehdr) *hdr = (ELF(Ehdr)*)base; + if (hdr->e_ident[EI_CLASS] != + (ELF_BITS == 32 ? ELFCLASS32 : ELFCLASS64)) { + return; /* Wrong ELF class -- check ELF_BITS */ + } + + ELF(Phdr) *pt = (ELF(Phdr)*)(vdso_info.load_addr + hdr->e_phoff); + ELF(Dyn) *dyn = 0; /* * We need two things from the segment table: the load offset @@ -108,7 +121,7 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) + (uintptr_t)pt[i].p_offset - (uintptr_t)pt[i].p_vaddr; } else if (pt[i].p_type == PT_DYNAMIC) { - dyn = (Elf64_Dyn*)(base + pt[i].p_offset); + dyn = (ELF(Dyn)*)(base + pt[i].p_offset); } } @@ -118,7 +131,7 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) /* * Fish out the useful bits of the dynamic table. */ - Elf64_Word *hash = 0; + ELF(Word) *hash = 0; vdso_info.symstrings = 0; vdso_info.symtab = 0; vdso_info.versym = 0; @@ -131,22 +144,22 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) + vdso_info.load_offset); break; case DT_SYMTAB: - vdso_info.symtab = (Elf64_Sym *) + vdso_info.symtab = (ELF(Sym) *) ((uintptr_t)dyn[i].d_un.d_ptr + vdso_info.load_offset); break; case DT_HASH: - hash = (Elf64_Word *) + hash = (ELF(Word) *) ((uintptr_t)dyn[i].d_un.d_ptr + vdso_info.load_offset); break; case DT_VERSYM: - vdso_info.versym = (Elf64_Versym *) + vdso_info.versym = (ELF(Versym) *) ((uintptr_t)dyn[i].d_un.d_ptr + vdso_info.load_offset); break; case DT_VERDEF: - vdso_info.verdef = (Elf64_Verdef *) + vdso_info.verdef = (ELF(Verdef) *) ((uintptr_t)dyn[i].d_un.d_ptr + vdso_info.load_offset); break; @@ -168,8 +181,8 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) vdso_info.valid = true; } -static bool vdso_match_version(Elf64_Versym ver, - const char *name, Elf64_Word hash) +static bool vdso_match_version(ELF(Versym) ver, + const char *name, ELF(Word) hash) { /* * This is a helper function to check if the version indexed by @@ -188,7 +201,7 @@ static bool vdso_match_version(Elf64_Versym ver, /* First step: find the version definition */ ver &= 0x7fff; /* Apparently bit 15 means "hidden" */ - Elf64_Verdef *def = vdso_info.verdef; + ELF(Verdef) *def = vdso_info.verdef; while(true) { if ((def->vd_flags & VER_FLG_BASE) == 0 && (def->vd_ndx & 0x7fff) == ver) @@ -197,11 +210,11 @@ static bool vdso_match_version(Elf64_Versym ver, if (def->vd_next == 0) return false; /* No definition. */ - def = (Elf64_Verdef *)((char *)def + def->vd_next); + def = (ELF(Verdef) *)((char *)def + def->vd_next); } /* Now figure out whether it matches. */ - Elf64_Verdaux *aux = (Elf64_Verdaux*)((char *)def + def->vd_aux); + ELF(Verdaux) *aux = (ELF(Verdaux)*)((char *)def + def->vd_aux); return def->vd_hash == hash && !strcmp(name, vdso_info.symstrings + aux->vda_name); } @@ -213,10 +226,10 @@ void *vdso_sym(const char *version, const char *name) return 0; ver_hash = elf_hash(version); - Elf64_Word chain = vdso_info.bucket[elf_hash(name) % vdso_info.nbucket]; + ELF(Word) chain = vdso_info.bucket[elf_hash(name) % vdso_info.nbucket]; for (; chain != STN_UNDEF; chain = vdso_info.chain[chain]) { - Elf64_Sym *sym = &vdso_info.symtab[chain]; + ELF(Sym) *sym = &vdso_info.symtab[chain]; /* Check for a defined global or weak function w/ right name. */ if (ELF64_ST_TYPE(sym->st_info) != STT_FUNC) @@ -243,7 +256,7 @@ void *vdso_sym(const char *version, const char *name) void vdso_init_from_auxv(void *auxv) { - Elf64_auxv_t *elf_auxv = auxv; + ELF(auxv_t) *elf_auxv = auxv; for (int i = 0; elf_auxv[i].a_type != AT_NULL; i++) { if (elf_auxv[i].a_type == AT_SYSINFO_EHDR) { diff --git a/Documentation/vDSO/vdso_standalone_test_x86.c b/Documentation/vDSO/vdso_standalone_test_x86.c index 1523f5d681f3..d46240265c50 100644 --- a/Documentation/vDSO/vdso_standalone_test_x86.c +++ b/Documentation/vDSO/vdso_standalone_test_x86.c @@ -1,13 +1,14 @@ /* - * vdso_test.c: Sample code to test parse_vdso.c on x86_64 - * Copyright (c) 2011 Andy Lutomirski + * vdso_test.c: Sample code to test parse_vdso.c on x86 + * Copyright (c) 2011-2014 Andy Lutomirski * Subject to the GNU General Public License, version 2 * * You can amuse yourself by compiling with: * gcc -std=gnu99 -nostdlib - * -Os -fno-asynchronous-unwind-tables -flto + * -Os -fno-asynchronous-unwind-tables -flto -lgcc_s * vdso_standalone_test_x86.c parse_vdso.c - * to generate a small binary with no dependencies at all. + * to generate a small binary. On x86_64, you can omit -lgcc_s + * if you want the binary to be completely standalone. */ #include @@ -35,21 +36,31 @@ int strcmp(const char *a, const char *b) return 0; } -/* ...and two syscalls. This is x86_64-specific. */ -static inline long linux_write(int fd, const void *data, size_t len) +/* ...and two syscalls. This is x86-specific. */ +static inline long x86_syscall3(long nr, long a0, long a1, long a2) { - long ret; - asm volatile ("syscall" : "=a" (ret) : "a" (__NR_write), - "D" (fd), "S" (data), "d" (len) : +#ifdef __x86_64__ + asm volatile ("syscall" : "=a" (ret) : "a" (nr), + "D" (a0), "S" (a1), "d" (a2) : "cc", "memory", "rcx", "r8", "r9", "r10", "r11" ); +#else + asm volatile ("int $0x80" : "=a" (ret) : "a" (nr), + "b" (a0), "c" (a1), "d" (a2) : + "cc", "memory" ); +#endif return ret; } +static inline long linux_write(int fd, const void *data, size_t len) +{ + return x86_syscall3(__NR_write, fd, (long)data, (long)len); +} + static inline void linux_exit(int code) { - asm volatile ("syscall" : : "a" (__NR_exit), "D" (code)); + x86_syscall3(__NR_exit, code, 0, 0); } void to_base10(char *lastdig, uint64_t n) @@ -104,8 +115,14 @@ __attribute__((externally_visible)) void c_main(void **stack) asm ( ".text\n" ".global _start\n" - ".type _start,@function\n" - "_start:\n\t" - "mov %rsp,%rdi\n\t" - "jmp c_main" + ".type _start,@function\n" + "_start:\n\t" +#ifdef __x86_64__ + "mov %rsp,%rdi\n\t" + "jmp c_main" +#else + "push %esp\n\t" + "call c_main\n\t" + "int $3" +#endif ); diff --git a/Documentation/vDSO/vdso_test.c b/Documentation/vDSO/vdso_test.c new file mode 100644 index 000000000000..8daeb7d7032c --- /dev/null +++ b/Documentation/vDSO/vdso_test.c @@ -0,0 +1,52 @@ +/* + * vdso_test.c: Sample code to test parse_vdso.c + * Copyright (c) 2014 Andy Lutomirski + * Subject to the GNU General Public License, version 2 + * + * Compile with: + * gcc -std=gnu99 vdso_test.c parse_vdso.c + * + * Tested on x86, 32-bit and 64-bit. It may work on other architectures, too. + */ + +#include +#include +#include +#include +#include + +extern void *vdso_sym(const char *version, const char *name); +extern void vdso_init_from_sysinfo_ehdr(uintptr_t base); +extern void vdso_init_from_auxv(void *auxv); + +int main(int argc, char **argv) +{ + unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); + if (!sysinfo_ehdr) { + printf("AT_SYSINFO_EHDR is not present!\n"); + return 0; + } + + vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); + + /* Find gettimeofday. */ + typedef long (*gtod_t)(struct timeval *tv, struct timezone *tz); + gtod_t gtod = (gtod_t)vdso_sym("LINUX_2.6", "__vdso_gettimeofday"); + + if (!gtod) { + printf("Could not find __vdso_gettimeofday\n"); + return 1; + } + + struct timeval tv; + long ret = gtod(&tv, 0); + + if (ret == 0) { + printf("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + } else { + printf("__vdso_gettimeofday failed\n"); + } + + return 0; +} -- cgit v1.2.3