From e9976d7c96423ac1991396aa82335206ded55bcf Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 27 Jun 2012 07:33:38 +0000 Subject: netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs Add a driver for BCM8706 and BCM8727 devices. These are a 10Gig PHYs which use MII_ADDR_C45 addressing. They are always 10G full duplex, so there is no autonegotiation. All we do is report link state and send interrupts when it changes. If the PHY has a device tree of_node associated with it, the "broadcom,c45-reg-init" property is used to supply register initialization values when config_init() is called. Signed-off-by: David Daney Signed-off-by: David S. Miller --- .../devicetree/bindings/net/broadcom-bcm87xx.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt new file mode 100644 index 000000000000..7c86d5e28a0e --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt @@ -0,0 +1,29 @@ +The Broadcom BCM87XX devices are a family of 10G Ethernet PHYs. They +have these bindings in addition to the standard PHY bindings. + +Compatible: Should contain "broadcom,bcm8706" or "broadcom,bcm8727" and + "ethernet-phy-ieee802.3-c45" + +Optional Properties: + +- broadcom,c45-reg-init : one of more sets of 4 cells. The first cell + is the MDIO Manageable Device (MMD) address, the second a register + address within the MMD, the third cell contains a mask to be ANDed + with the existing register value, and the fourth cell is ORed with + he result to yield the new register value. If the third cell has a + value of zero, no read of the existing value is performed. + +Example: + + ethernet-phy@5 { + reg = <5>; + compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + /* + * Set PMD Digital Control Register for + * GPIO[1] Tx/Rx + * GPIO[0] R64 Sync Acquired + */ + broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>; + }; -- cgit v1.2.3