From 8d0afa1a93be2da954c85392bbc7b2264c9d241c Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Tue, 15 Sep 2015 17:39:20 -0700 Subject: PCI: iproc: Update PCIe device tree bindings Update the device tree bindings with added support for outbound mapping configurations. Signed-off-by: Ray Jui Signed-off-by: Bjorn Helgaas --- .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index f7ce50e38ed4..45c2a8094a9f 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -17,6 +17,21 @@ Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done +by the ASIC after power on reset. In this case, SW needs to configure it + +If the brcm,pcie-ob property is present, the following properties become +effective: + +Required: +- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal +address used by the iProc PCIe core (not the PCIe address) +- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) + +Optional: +- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to +increase the outbound window size + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -38,6 +53,11 @@ Example: phys = <&phy 0 5>; phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; }; pcie1: pcie@18013000 { -- cgit v1.2.3 From f6225c3a0c1f2ef908244c31b91d62066360ce1d Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 8 Oct 2015 12:54:16 -0700 Subject: PCI: generic: Fix address window calculation for non-zero starting bus Make the offset from the beginning of the "reg" property be from the starting bus number, rather than zero. Hoist the invariant size calculation out of the mapping for loop. Update host-generic-pci.txt to clarify the semantics of the "reg" property with respect to non-zero starting bus numbers. Signed-off-by: David Daney Signed-off-by: Bjorn Helgaas Reviewed-by: Arnd Bergmann Acked-by: Rob Herring --- Documentation/devicetree/bindings/pci/host-generic-pci.txt | 5 +++-- drivers/pci/host/pci-host-generic.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt index cf3e205e0b7e..3f1d3fca62bb 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -34,8 +34,9 @@ Properties of the host controller node: - #size-cells : Must be 2. - reg : The Configuration Space base address and size, as accessed - from the parent bus. - + from the parent bus. The base address corresponds to + the first bus in the "bus-range" property. If no + "bus-range" is specified, this will be bus 0 (the default). Properties of the /chosen node: diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c index 895c0e39ca3b..5434c90db243 100644 --- a/drivers/pci/host/pci-host-generic.c +++ b/drivers/pci/host/pci-host-generic.c @@ -169,6 +169,7 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci) struct resource *bus_range; struct device *dev = pci->host.dev.parent; struct device_node *np = dev->of_node; + u32 sz = 1 << pci->cfg.ops->bus_shift; err = of_address_to_resource(np, 0, &pci->cfg.res); if (err) { @@ -196,10 +197,9 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci) bus_range = pci->cfg.bus_range; for (busn = bus_range->start; busn <= bus_range->end; ++busn) { u32 idx = busn - bus_range->start; - u32 sz = 1 << pci->cfg.ops->bus_shift; pci->cfg.win[idx] = devm_ioremap(dev, - pci->cfg.res.start + busn * sz, + pci->cfg.res.start + idx * sz, sz); if (!pci->cfg.win[idx]) return -ENOMEM; -- cgit v1.2.3 From eaa6111b70a7cb43b7536eacea8ef501fc4fc235 Mon Sep 17 00:00:00 2001 From: Ley Foon Tan Date: Fri, 23 Oct 2015 18:27:12 +0800 Subject: PCI: altera: Add Altera PCIe host controller driver Add the Altera PCIe host controller driver. [bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI dependency from Arnd] Signed-off-by: Ley Foon Tan Signed-off-by: Bjorn Helgaas Reviewed-by: Marc Zyngier Acked-by: Rob Herring (DT binding) --- .../devicetree/bindings/pci/altera-pcie.txt | 49 ++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 9 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-altera.c | 579 +++++++++++++++++++++ 5 files changed, 646 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie.txt create mode 100644 drivers/pci/host/pcie-altera.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt new file mode 100644 index 000000000000..2951a6a50704 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -0,0 +1,49 @@ +* Altera PCIe controller + +Required properties: +- compatible : should contain "altr,pcie-root-port-1.0" +- reg: a list of physical base address and length for TXS and CRA. +- reg-names: must include the following entries: + "Txs": TX slave port region + "Cra": Control register access region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt controller. + The format of the interrupt specifier depends on the parent interrupt + controller. +- device_type: must be "pci" +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- ranges: describes the translation of addresses for root ports and standard + PCI regions. +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe + controller. +- bus-range: PCI bus numbers covered + +Example + pcie_0: pcie@0xc00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 40 4>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xFF>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 1>, + <0 0 0 2 &pcie_0 2>, + <0 0 0 3 &pcie_0 3>, + <0 0 0 4 &pcie_0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7ba7ab749c85..d8fc71ec8cb8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7938,6 +7938,14 @@ F: include/linux/pci* F: arch/x86/pci/ F: arch/x86/kernel/quirks.c +PCI DRIVER FOR ALTERA PCIE IP +M: Ley Foon Tan +L: rfi@lists.rocketboards.org (moderated for non-subscribers) +L: linux-pci@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/altera-pcie.txt +F: drivers/pci/host/pcie-altera.c + PCI DRIVER FOR ARM VERSATILE PLATFORM M: Rob Herring L: linux-pci@vger.kernel.org diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index d5e58bae95cf..f48e6d004425 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -145,4 +145,13 @@ config PCIE_IPROC_BCMA Say Y here if you want to use the Broadcom iProc PCIe controller through the BCMA bus interface +config PCIE_ALTERA + bool "Altera PCIe controller" + depends on ARM || NIOS2 + depends on OF_PCI + select PCI_DOMAINS + help + Say Y here if you want to enable PCIe controller support on Altera + FPGA. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 140d66f796e4..6954f7666ac1 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c new file mode 100644 index 000000000000..e5dda38bdde5 --- /dev/null +++ b/drivers/pci/host/pcie-altera.c @@ -0,0 +1,579 @@ +/* + * Copyright Altera Corporation (C) 2013-2015. All rights reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RP_TX_REG0 0x2000 +#define RP_TX_REG1 0x2004 +#define RP_TX_CNTRL 0x2008 +#define RP_TX_EOP 0x2 +#define RP_TX_SOP 0x1 +#define RP_RXCPL_STATUS 0x2010 +#define RP_RXCPL_EOP 0x2 +#define RP_RXCPL_SOP 0x1 +#define RP_RXCPL_REG0 0x2014 +#define RP_RXCPL_REG1 0x2018 +#define P2A_INT_STATUS 0x3060 +#define P2A_INT_STS_ALL 0xf +#define P2A_INT_ENABLE 0x3070 +#define P2A_INT_ENA_ALL 0xf +#define RP_LTSSM 0x3c64 +#define LTSSM_L0 0xf + +/* TLP configuration type 0 and 1 */ +#define TLP_FMTTYPE_CFGRD0 0x04 /* Configuration Read Type 0 */ +#define TLP_FMTTYPE_CFGWR0 0x44 /* Configuration Write Type 0 */ +#define TLP_FMTTYPE_CFGRD1 0x05 /* Configuration Read Type 1 */ +#define TLP_FMTTYPE_CFGWR1 0x45 /* Configuration Write Type 1 */ +#define TLP_PAYLOAD_SIZE 0x01 +#define TLP_READ_TAG 0x1d +#define TLP_WRITE_TAG 0x10 +#define TLP_CFG_DW0(fmttype) (((fmttype) << 24) | TLP_PAYLOAD_SIZE) +#define TLP_CFG_DW1(reqid, tag, be) (((reqid) << 16) | (tag << 8) | (be)) +#define TLP_CFG_DW2(bus, devfn, offset) \ + (((bus) << 24) | ((devfn) << 16) | (offset)) +#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) +#define TLP_HDR_SIZE 3 +#define TLP_LOOP 500 + +#define INTX_NUM 4 + +#define DWORD_MASK 3 + +struct altera_pcie { + struct platform_device *pdev; + void __iomem *cra_base; + int irq; + u8 root_bus_nr; + struct irq_domain *irq_domain; + struct resource bus_range; + struct list_head resources; +}; + +struct tlp_rp_regpair_t { + u32 ctrl; + u32 reg0; + u32 reg1; +}; + +static void altera_pcie_retrain(struct pci_dev *dev) +{ + u16 linkcap, linkstat; + + /* + * Set the retrain bit if the PCIe rootport support > 2.5GB/s, but + * current speed is 2.5 GB/s. + */ + pcie_capability_read_word(dev, PCI_EXP_LNKCAP, &linkcap); + + if ((linkcap & PCI_EXP_LNKCAP_SLS) <= PCI_EXP_LNKCAP_SLS_2_5GB) + return; + + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &linkstat); + if ((linkstat & PCI_EXP_LNKSTA_CLS) == PCI_EXP_LNKSTA_CLS_2_5GB) + pcie_capability_set_word(dev, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_RL); +} +DECLARE_PCI_FIXUP_EARLY(0x1172, PCI_ANY_ID, altera_pcie_retrain); + +/* + * Altera PCIe port uses BAR0 of RC's configuration space as the translation + * from PCI bus to native BUS. Entire DDR region is mapped into PCIe space + * using these registers, so it can be reached by DMA from EP devices. + * This BAR0 will also access to MSI vector when receiving MSI/MSIX interrupt + * from EP devices, eventually trigger interrupt to GIC. The BAR0 of bridge + * should be hidden during enumeration to avoid the sizing and resource + * allocation by PCIe core. + */ +static bool altera_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int devfn, + int offset) +{ + if (pci_is_root_bus(bus) && (devfn == 0) && + (offset == PCI_BASE_ADDRESS_0)) + return true; + + return false; +} + +static inline void cra_writel(struct altera_pcie *pcie, const u32 value, + const u32 reg) +{ + writel_relaxed(value, pcie->cra_base + reg); +} + +static inline u32 cra_readl(struct altera_pcie *pcie, const u32 reg) +{ + return readl_relaxed(pcie->cra_base + reg); +} + +static void tlp_write_tx(struct altera_pcie *pcie, + struct tlp_rp_regpair_t *tlp_rp_regdata) +{ + cra_writel(pcie, tlp_rp_regdata->reg0, RP_TX_REG0); + cra_writel(pcie, tlp_rp_regdata->reg1, RP_TX_REG1); + cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL); +} + +static bool altera_pcie_link_is_up(struct altera_pcie *pcie) +{ + return !!(cra_readl(pcie, RP_LTSSM) & LTSSM_L0); +} + +static bool altera_pcie_valid_config(struct altera_pcie *pcie, + struct pci_bus *bus, int dev) +{ + /* If there is no link, then there is no device */ + if (bus->number != pcie->root_bus_nr) { + if (!altera_pcie_link_is_up(pcie)) + return false; + } + + /* access only one slot on each root port */ + if (bus->number == pcie->root_bus_nr && dev > 0) + return false; + + /* + * Do not read more than one device on the bus directly attached + * to root port, root port can only attach to one downstream port. + */ + if (bus->primary == pcie->root_bus_nr && dev > 0) + return false; + + return true; +} + +static int tlp_read_packet(struct altera_pcie *pcie, u32 *value) +{ + u8 loop; + bool sop = 0; + u32 ctrl; + u32 reg0, reg1; + + /* + * Minimum 2 loops to read TLP headers and 1 loop to read data + * payload. + */ + for (loop = 0; loop < TLP_LOOP; loop++) { + ctrl = cra_readl(pcie, RP_RXCPL_STATUS); + if ((ctrl & RP_RXCPL_SOP) || (ctrl & RP_RXCPL_EOP) || sop) { + reg0 = cra_readl(pcie, RP_RXCPL_REG0); + reg1 = cra_readl(pcie, RP_RXCPL_REG1); + + if (ctrl & RP_RXCPL_SOP) + sop = true; + + if (ctrl & RP_RXCPL_EOP) { + if (value) + *value = reg0; + return PCIBIOS_SUCCESSFUL; + } + } + udelay(5); + } + + return -ENOENT; +} + +static void tlp_write_packet(struct altera_pcie *pcie, u32 *headers, + u32 data, bool align) +{ + struct tlp_rp_regpair_t tlp_rp_regdata; + + tlp_rp_regdata.reg0 = headers[0]; + tlp_rp_regdata.reg1 = headers[1]; + tlp_rp_regdata.ctrl = RP_TX_SOP; + tlp_write_tx(pcie, &tlp_rp_regdata); + + if (align) { + tlp_rp_regdata.reg0 = headers[2]; + tlp_rp_regdata.reg1 = 0; + tlp_rp_regdata.ctrl = 0; + tlp_write_tx(pcie, &tlp_rp_regdata); + + tlp_rp_regdata.reg0 = data; + tlp_rp_regdata.reg1 = 0; + } else { + tlp_rp_regdata.reg0 = headers[2]; + tlp_rp_regdata.reg1 = data; + } + + tlp_rp_regdata.ctrl = RP_TX_EOP; + tlp_write_tx(pcie, &tlp_rp_regdata); +} + +static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus, u32 devfn, + int where, u8 byte_en, u32 *value) +{ + u32 headers[TLP_HDR_SIZE]; + + if (bus == pcie->root_bus_nr) + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD0); + else + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGRD1); + + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn), + TLP_READ_TAG, byte_en); + headers[2] = TLP_CFG_DW2(bus, devfn, where); + + tlp_write_packet(pcie, headers, 0, false); + + return tlp_read_packet(pcie, value); +} + +static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus, u32 devfn, + int where, u8 byte_en, u32 value) +{ + u32 headers[TLP_HDR_SIZE]; + int ret; + + if (bus == pcie->root_bus_nr) + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR0); + else + headers[0] = TLP_CFG_DW0(TLP_FMTTYPE_CFGWR1); + + headers[1] = TLP_CFG_DW1(TLP_REQ_ID(pcie->root_bus_nr, devfn), + TLP_WRITE_TAG, byte_en); + headers[2] = TLP_CFG_DW2(bus, devfn, where); + + /* check alignment to Qword */ + if ((where & 0x7) == 0) + tlp_write_packet(pcie, headers, value, true); + else + tlp_write_packet(pcie, headers, value, false); + + ret = tlp_read_packet(pcie, NULL); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + /* + * Monitor changes to PCI_PRIMARY_BUS register on root port + * and update local copy of root bus number accordingly. + */ + if ((bus == pcie->root_bus_nr) && (where == PCI_PRIMARY_BUS)) + pcie->root_bus_nr = (u8)(value); + + return PCIBIOS_SUCCESSFUL; +} + +static int altera_pcie_cfg_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + struct altera_pcie *pcie = bus->sysdata; + int ret; + u32 data; + u8 byte_en; + + if (altera_pcie_hide_rc_bar(bus, devfn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!altera_pcie_valid_config(pcie, bus, PCI_SLOT(devfn))) { + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + switch (size) { + case 1: + byte_en = 1 << (where & 3); + break; + case 2: + byte_en = 3 << (where & 3); + break; + default: + byte_en = 0xf; + break; + } + + ret = tlp_cfg_dword_read(pcie, bus->number, devfn, + (where & ~DWORD_MASK), byte_en, &data); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + switch (size) { + case 1: + *value = (data >> (8 * (where & 0x3))) & 0xff; + break; + case 2: + *value = (data >> (8 * (where & 0x2))) & 0xffff; + break; + default: + *value = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int altera_pcie_cfg_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + struct altera_pcie *pcie = bus->sysdata; + u32 data32; + u32 shift = 8 * (where & 3); + u8 byte_en; + + if (altera_pcie_hide_rc_bar(bus, devfn, where)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!altera_pcie_valid_config(pcie, bus, PCI_SLOT(devfn))) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (size) { + case 1: + data32 = (value & 0xff) << shift; + byte_en = 1 << (where & 3); + break; + case 2: + data32 = (value & 0xffff) << shift; + byte_en = 3 << (where & 3); + break; + default: + data32 = value; + byte_en = 0xf; + break; + } + + return tlp_cfg_dword_write(pcie, bus->number, devfn, + (where & ~DWORD_MASK), byte_en, data32); +} + +static struct pci_ops altera_pcie_ops = { + .read = altera_pcie_cfg_read, + .write = altera_pcie_cfg_write, +}; + +static int altera_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + + return 0; +} + +static const struct irq_domain_ops intx_domain_ops = { + .map = altera_pcie_intx_map, +}; + +static void altera_pcie_isr(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct altera_pcie *pcie; + unsigned long status; + u32 bit; + u32 virq; + + chained_irq_enter(chip, desc); + pcie = irq_desc_get_handler_data(desc); + + while ((status = cra_readl(pcie, P2A_INT_STATUS) + & P2A_INT_STS_ALL) != 0) { + for_each_set_bit(bit, &status, INTX_NUM) { + /* clear interrupts */ + cra_writel(pcie, 1 << bit, P2A_INT_STATUS); + + virq = irq_find_mapping(pcie->irq_domain, bit + 1); + if (virq) + generic_handle_irq(virq); + else + dev_err(&pcie->pdev->dev, + "unexpected IRQ, INT%d\n", bit); + } + } + + chained_irq_exit(chip, desc); +} + +static void altera_pcie_release_of_pci_ranges(struct altera_pcie *pcie) +{ + pci_free_resource_list(&pcie->resources); +} + +static int altera_pcie_parse_request_of_pci_ranges(struct altera_pcie *pcie) +{ + int err, res_valid = 0; + struct device *dev = &pcie->pdev->dev; + struct device_node *np = dev->of_node; + struct resource_entry *win; + + err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pcie->resources, + NULL); + if (err) + return err; + + resource_list_for_each_entry(win, &pcie->resources) { + struct resource *parent, *res = win->res; + + switch (resource_type(res)) { + case IORESOURCE_MEM: + parent = &iomem_resource; + res_valid |= !(res->flags & IORESOURCE_PREFETCH); + break; + default: + continue; + } + + err = devm_request_resource(dev, parent, res); + if (err) + goto out_release_res; + } + + if (!res_valid) { + dev_err(dev, "non-prefetchable memory resource required\n"); + err = -EINVAL; + goto out_release_res; + } + + return 0; + +out_release_res: + altera_pcie_release_of_pci_ranges(pcie); + return err; +} + +static int altera_pcie_init_irq_domain(struct altera_pcie *pcie) +{ + struct device *dev = &pcie->pdev->dev; + struct device_node *node = dev->of_node; + + /* Setup INTx */ + pcie->irq_domain = irq_domain_add_linear(node, INTX_NUM, + &intx_domain_ops, pcie); + if (!pcie->irq_domain) { + dev_err(dev, "Failed to get a INTx IRQ domain\n"); + return -ENOMEM; + } + + return 0; +} + +static int altera_pcie_parse_dt(struct altera_pcie *pcie) +{ + struct resource *cra; + struct platform_device *pdev = pcie->pdev; + + cra = platform_get_resource_byname(pdev, IORESOURCE_MEM, "Cra"); + if (!cra) { + dev_err(&pdev->dev, "no Cra memory resource defined\n"); + return -ENODEV; + } + + pcie->cra_base = devm_ioremap_resource(&pdev->dev, cra); + if (IS_ERR(pcie->cra_base)) { + dev_err(&pdev->dev, "failed to map cra memory\n"); + return PTR_ERR(pcie->cra_base); + } + + /* setup IRQ */ + pcie->irq = platform_get_irq(pdev, 0); + if (pcie->irq <= 0) { + dev_err(&pdev->dev, "failed to get IRQ: %d\n", pcie->irq); + return -EINVAL; + } + + irq_set_chained_handler_and_data(pcie->irq, altera_pcie_isr, pcie); + + return 0; +} + +static int altera_pcie_probe(struct platform_device *pdev) +{ + struct altera_pcie *pcie; + struct pci_bus *bus; + struct pci_bus *child; + int ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + + ret = altera_pcie_parse_dt(pcie); + if (ret) { + dev_err(&pdev->dev, "Parsing DT failed\n"); + return ret; + } + + INIT_LIST_HEAD(&pcie->resources); + + ret = altera_pcie_parse_request_of_pci_ranges(pcie); + if (ret) { + dev_err(&pdev->dev, "Failed add resources\n"); + return ret; + } + + ret = altera_pcie_init_irq_domain(pcie); + if (ret) { + dev_err(&pdev->dev, "Failed creating IRQ Domain\n"); + return ret; + } + + /* clear all interrupts */ + cra_writel(pcie, P2A_INT_STS_ALL, P2A_INT_STATUS); + /* enable all interrupts */ + cra_writel(pcie, P2A_INT_ENA_ALL, P2A_INT_ENABLE); + + bus = pci_scan_root_bus(&pdev->dev, pcie->root_bus_nr, &altera_pcie_ops, + pcie, &pcie->resources); + if (!bus) + return -ENOMEM; + + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); + pci_assign_unassigned_bus_resources(bus); + + /* Configure PCI Express setting. */ + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + + pci_bus_add_devices(bus); + + platform_set_drvdata(pdev, pcie); + return ret; +} + +static const struct of_device_id altera_pcie_of_match[] = { + { .compatible = "altr,pcie-root-port-1.0", }, + {}, +}; +MODULE_DEVICE_TABLE(of, altera_pcie_of_match); + +static struct platform_driver altera_pcie_driver = { + .probe = altera_pcie_probe, + .driver = { + .name = "altera-pcie", + .of_match_table = altera_pcie_of_match, + .suppress_bind_attrs = true, + }, +}; + +static int altera_pcie_init(void) +{ + return platform_driver_register(&altera_pcie_driver); +} +module_init(altera_pcie_init); + +MODULE_AUTHOR("Ley Foon Tan "); +MODULE_DESCRIPTION("Altera PCIe host controller driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 907fce0902539ecde609e485eb2ecd7119a7a623 Mon Sep 17 00:00:00 2001 From: Gabriele Paoloni Date: Tue, 29 Sep 2015 00:03:10 +0800 Subject: PCI: designware: Make "num-lanes" an optional DT property Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used if we call dw_pcie_setup_rc() while bringing up the link. If the link has already been brought up by firmware, we need not call dw_pcie_setup_rc(), and "num-lanes" is unnecessary. Only complain about "num-lanes" if we actually need it and we didn't find a valid value. [bhelgaas: changelog] Signed-off-by: Gabriele Paoloni Signed-off-by: Bjorn Helgaas --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 3 ++- drivers/pci/host/pcie-designware.c | 10 ++++++---- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 9f4faa8e8d00..0036ab3065b8 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -14,7 +14,6 @@ Required properties: - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. -- num-lanes: number of lanes to use - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: @@ -22,6 +21,8 @@ Required properties: - "pcie_bus" Optional properties: +- num-lanes: number of lanes to use (this property should be specified unless + the link is brought already up in BIOS) - reset-gpio: gpio pin number of power good signal - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index b77535f3967b..fb89ca23d9a8 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -534,10 +534,9 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - if (of_property_read_u32(np, "num-lanes", &pp->lanes)) { - dev_err(pp->dev, "Failed to parse the number of lanes\n"); - return -EINVAL; - } + ret = of_property_read_u32(np, "num-lanes", &pp->lanes); + if (ret) + pp->lanes = 0; if (IS_ENABLED(CONFIG_PCI_MSI)) { if (!pp->ops->msi_host_init) { @@ -814,6 +813,9 @@ void dw_pcie_setup_rc(struct pcie_port *pp) case 8: val |= PORT_LINK_MODE_8_LANES; break; + default: + dev_err(pp->dev, "num-lanes %u: invalid value\n", pp->lanes); + return; } dw_pcie_writel_rc(pp, val, PCIE_PORT_LINK_CONTROL); -- cgit v1.2.3 From df7701621b8ba6a5b387b451e409276ed9c034e5 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Mon, 2 Nov 2015 14:46:53 -0600 Subject: PCI: designware: Make "clocks" and "clock-names" optional DT properties Move the clock-related properties in the DesignWare PCIe controller bindings to 'optional' set of properties. [bhelgaas: move to separate patch] Signed-off-by: Bhupesh Sharma Signed-off-by: Bjorn Helgaas Acked-by: Arnd Bergmann --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 0036ab3065b8..5b0853df9d5a 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -14,11 +14,7 @@ Required properties: - interrupt-map-mask and interrupt-map: standard PCI properties to define the mapping of the PCIe interface to interrupt numbers. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "pcie" - - "pcie_bus" +- num-lanes: number of lanes to use Optional properties: - num-lanes: number of lanes to use (this property should be specified unless @@ -27,3 +23,8 @@ Optional properties: - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff is assumed if not present) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "pcie" + - "pcie_bus" -- cgit v1.2.3 From 5192ec7b24dd78bd82fe554995b8889d317da0c1 Mon Sep 17 00:00:00 2001 From: Minghuan Lian Date: Fri, 16 Oct 2015 15:19:19 +0800 Subject: PCI: layerscape: Add support for LS1043a and LS2080a Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have similar PCIe implementation. LUT is added to controller. Add LS1043a and LS2080a support. [bhelgaas: move unused field removal into separate patch, include DT update] Signed-off-by: Bhupesh Sharma (DT update) Signed-off-by: Minghuan Lian Signed-off-by: Bjorn Helgaas Acked-by: Arnd Bergmann (DT update) --- .../devicetree/bindings/pci/layerscape-pci.txt | 14 ++++- drivers/pci/host/Kconfig | 2 +- drivers/pci/host/pci-layerscape.c | 71 ++++++++++++++++++++-- 3 files changed, 80 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 6286f049bf18..e3767857d30d 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -1,10 +1,20 @@ Freescale Layerscape PCIe controller -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + Required properties: -- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" +- compatible: should contain the platform identifier such as: + "fsl,ls1021a-pcie", "snps,dw-pcie" + "fsl,ls2080a-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index d5e58bae95cf..fcf08a03535d 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -105,7 +105,7 @@ config PCI_XGENE_MSI config PCI_LAYERSCAPE bool "Freescale Layerscape PCIe controller" - depends on OF && ARM + depends on OF && (ARM || ARCH_LAYERSCAPE) select PCIE_DW select MFD_SYSCON help diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c index 7d61cbb9bab1..0f6dd4456409 100644 --- a/drivers/pci/host/pci-layerscape.c +++ b/drivers/pci/host/pci-layerscape.c @@ -3,7 +3,7 @@ * * Copyright (C) 2014 Freescale Semiconductor. * - * Author: Minghuan Lian + * Author: Minghuan Lian * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -31,20 +31,26 @@ #define LTSSM_STATE_MASK 0x3f #define LTSSM_PCIE_L0 0x11 /* L0 state */ -/* Symbol Timer Register and Filter Mask Register 1 */ -#define PCIE_STRFMR1 0x71c +/* PEX Internal Configuration Registers */ +#define PCIE_STRFMR1 0x71c /* Symbol Timer & Filter Mask Register1 */ +#define PCIE_DBI_RO_WR_EN 0x8bc /* DBI Read-Only Write Enable Register */ + +/* PEX LUT registers */ +#define PCIE_LUT_DBG 0x7FC /* PEX LUT Debug Register */ struct ls_pcie_drvdata { + u32 lut_offset; + u32 ltssm_shift; struct pcie_host_ops *ops; }; struct ls_pcie { void __iomem *dbi; + void __iomem *lut; struct regmap *scfg; struct pcie_port pp; const struct ls_pcie_drvdata *drvdata; int index; - int msi_irq; }; #define to_ls_pcie(x) container_of(x, struct ls_pcie, pp) @@ -59,6 +65,18 @@ static bool ls_pcie_is_bridge(struct ls_pcie *pcie) return header_type == PCI_HEADER_TYPE_BRIDGE; } +/* Clear multi-function bit */ +static void ls_pcie_clear_multifunction(struct ls_pcie *pcie) +{ + iowrite8(PCI_HEADER_TYPE_BRIDGE, pcie->dbi + PCI_HEADER_TYPE); +} + +/* Fix class value */ +static void ls_pcie_fix_class(struct ls_pcie *pcie) +{ + iowrite16(PCI_CLASS_BRIDGE_PCI, pcie->dbi + PCI_CLASS_DEVICE); +} + static int ls1021_pcie_link_up(struct pcie_port *pp) { u32 state; @@ -107,17 +125,61 @@ static void ls1021_pcie_host_init(struct pcie_port *pp) iowrite32(val, pcie->dbi + PCIE_STRFMR1); } +static int ls_pcie_link_up(struct pcie_port *pp) +{ + struct ls_pcie *pcie = to_ls_pcie(pp); + u32 state; + + state = (ioread32(pcie->lut + PCIE_LUT_DBG) >> + pcie->drvdata->ltssm_shift) & + LTSSM_STATE_MASK; + + if (state < LTSSM_PCIE_L0) + return 0; + + return 1; +} + +static void ls_pcie_host_init(struct pcie_port *pp) +{ + struct ls_pcie *pcie = to_ls_pcie(pp); + + iowrite32(1, pcie->dbi + PCIE_DBI_RO_WR_EN); + ls_pcie_fix_class(pcie); + ls_pcie_clear_multifunction(pcie); + iowrite32(0, pcie->dbi + PCIE_DBI_RO_WR_EN); +} + static struct pcie_host_ops ls1021_pcie_host_ops = { .link_up = ls1021_pcie_link_up, .host_init = ls1021_pcie_host_init, }; +static struct pcie_host_ops ls_pcie_host_ops = { + .link_up = ls_pcie_link_up, + .host_init = ls_pcie_host_init, +}; + static struct ls_pcie_drvdata ls1021_drvdata = { .ops = &ls1021_pcie_host_ops, }; +static struct ls_pcie_drvdata ls1043_drvdata = { + .lut_offset = 0x10000, + .ltssm_shift = 24, + .ops = &ls_pcie_host_ops, +}; + +static struct ls_pcie_drvdata ls2080_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, + .ops = &ls_pcie_host_ops, +}; + static const struct of_device_id ls_pcie_of_match[] = { { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, + { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, { }, }; MODULE_DEVICE_TABLE(of, ls_pcie_of_match); @@ -164,6 +226,7 @@ static int __init ls_pcie_probe(struct platform_device *pdev) } pcie->drvdata = match->data; + pcie->lut = pcie->dbi + pcie->drvdata->lut_offset; if (!ls_pcie_is_bridge(pcie)) return -ENODEV; -- cgit v1.2.3 From 500a1d9a43e0a16e3cfc48f4b192ad421d4de376 Mon Sep 17 00:00:00 2001 From: Zhou Wang Date: Thu, 29 Oct 2015 20:02:51 -0500 Subject: PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver Add PCIe host support for HiSilicon SoC Hip05, related DT binding documentation, and maintainer update. [bhelgaas: changelog, 32-bit only config write warning text] Signed-off-by: Zhou Wang Signed-off-by: Gabriele Paoloni Signed-off-by: liudongdong Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring (DT binding) --- .../bindings/arm/hisilicon/hisilicon.txt | 17 ++ .../devicetree/bindings/pci/hisilicon-pcie.txt | 44 +++++ MAINTAINERS | 7 + drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-hisi.c | 198 +++++++++++++++++++++ 6 files changed, 275 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt create mode 100644 drivers/pci/host/pcie-hisi.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index c733e28e18e5..764c738bb3ba 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -166,6 +166,23 @@ Example: reboot-offset = <0x4>; }; +----------------------------------------------------------------------- +Hisilicon HiP05 PCIe-SAS system controller + +Required properties: +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; +- reg : Register address and size + +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in +HiP05 Soc to implement some basic configurations. + +Example: + /* for HiP05 PCIe-SAS system */ + pcie_sas: system_controller@0xb0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0xb0000000 0x10000>; + }; + ----------------------------------------------------------------------- Hisilicon CPU controller diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 000000000000..17c6ed9c6059 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,44 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7ba7ab749c85..944a229bb01e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8047,6 +8047,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt F: drivers/pci/host/pci-xgene-msi.c +PCIE DRIVER FOR HISILICON +M: Zhou Wang +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +F: drivers/pci/host/pcie-hisi.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index d5e58bae95cf..ae873beaff2b 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA Say Y here if you want to use the Broadcom iProc PCIe controller through the BCMA bus interface +config PCI_HISI + depends on OF && ARM64 + bool "HiSilicon SoC HIP05 PCIe controller" + select PCIEPORTBUS + select PCIE_DW + help + Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 140d66f796e4..ea1dbf28ae41 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +obj-$(CONFIG_PCI_HISI) += pcie-hisi.o diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c new file mode 100644 index 000000000000..35457ecd8e70 --- /dev/null +++ b/drivers/pci/host/pcie-hisi.c @@ -0,0 +1,198 @@ +/* + * PCIe host controller driver for HiSilicon Hip05 SoC + * + * Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com + * + * Author: Zhou Wang + * Dacai Zhu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include "pcie-designware.h" + +#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818 +#define PCIE_LTSSM_LINKUP_STATE 0x11 +#define PCIE_LTSSM_STATE_MASK 0x3F + +#define to_hisi_pcie(x) container_of(x, struct hisi_pcie, pp) + +struct hisi_pcie { + struct regmap *subctrl; + void __iomem *reg_base; + u32 port_id; + struct pcie_port pp; +}; + +static inline void hisi_pcie_apb_writel(struct hisi_pcie *pcie, + u32 val, u32 reg) +{ + writel(val, pcie->reg_base + reg); +} + +static inline u32 hisi_pcie_apb_readl(struct hisi_pcie *pcie, u32 reg) +{ + return readl(pcie->reg_base + reg); +} + +/* Hip05 PCIe host only supports 32-bit config access */ +static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size, + u32 *val) +{ + u32 reg; + u32 reg_val; + struct hisi_pcie *pcie = to_hisi_pcie(pp); + void *walker = ®_val; + + walker += (where & 0x3); + reg = where & ~0x3; + reg_val = hisi_pcie_apb_readl(pcie, reg); + + if (size == 1) + *val = *(u8 __force *) walker; + else if (size == 2) + *val = *(u16 __force *) walker; + else if (size != 4) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +/* Hip05 PCIe host only supports 32-bit config access */ +static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size, + u32 val) +{ + u32 reg_val; + u32 reg; + struct hisi_pcie *pcie = to_hisi_pcie(pp); + void *walker = ®_val; + + walker += (where & 0x3); + reg = where & ~0x3; + if (size == 4) + hisi_pcie_apb_writel(pcie, val, reg); + else if (size == 2) { + reg_val = hisi_pcie_apb_readl(pcie, reg); + *(u16 __force *) walker = val; + hisi_pcie_apb_writel(pcie, reg_val, reg); + } else if (size == 1) { + reg_val = hisi_pcie_apb_readl(pcie, reg); + *(u8 __force *) walker = val; + hisi_pcie_apb_writel(pcie, reg_val, reg); + } else + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static int hisi_pcie_link_up(struct pcie_port *pp) +{ + u32 val; + struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp); + + regmap_read(hisi_pcie->subctrl, PCIE_SUBCTRL_SYS_STATE4_REG + + 0x100 * hisi_pcie->port_id, &val); + + return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE); +} + +static struct pcie_host_ops hisi_pcie_host_ops = { + .rd_own_conf = hisi_pcie_cfg_read, + .wr_own_conf = hisi_pcie_cfg_write, + .link_up = hisi_pcie_link_up, +}; + +static int __init hisi_add_pcie_port(struct pcie_port *pp, + struct platform_device *pdev) +{ + int ret; + u32 port_id; + struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp); + + if (of_property_read_u32(pdev->dev.of_node, "port-id", &port_id)) { + dev_err(&pdev->dev, "failed to read port-id\n"); + return -EINVAL; + } + if (port_id > 3) { + dev_err(&pdev->dev, "Invalid port-id: %d\n", port_id); + return -EINVAL; + } + hisi_pcie->port_id = port_id; + + pp->ops = &hisi_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(&pdev->dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int __init hisi_pcie_probe(struct platform_device *pdev) +{ + struct hisi_pcie *hisi_pcie; + struct pcie_port *pp; + struct resource *reg; + int ret; + + hisi_pcie = devm_kzalloc(&pdev->dev, sizeof(*hisi_pcie), GFP_KERNEL); + if (!hisi_pcie) + return -ENOMEM; + + pp = &hisi_pcie->pp; + pp->dev = &pdev->dev; + + hisi_pcie->subctrl = + syscon_regmap_lookup_by_compatible("hisilicon,pcie-sas-subctrl"); + if (IS_ERR(hisi_pcie->subctrl)) { + dev_err(pp->dev, "cannot get subctrl base\n"); + return PTR_ERR(hisi_pcie->subctrl); + } + + reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi"); + hisi_pcie->reg_base = devm_ioremap_resource(&pdev->dev, reg); + if (IS_ERR(hisi_pcie->reg_base)) { + dev_err(pp->dev, "cannot get rc_dbi base\n"); + return PTR_ERR(hisi_pcie->reg_base); + } + + hisi_pcie->pp.dbi_base = hisi_pcie->reg_base; + + ret = hisi_add_pcie_port(pp, pdev); + if (ret) + return ret; + + platform_set_drvdata(pdev, hisi_pcie); + + dev_warn(pp->dev, "only 32-bit config accesses supported; smaller writes may corrupt adjacent RW1C fields\n"); + + return 0; +} + +static const struct of_device_id hisi_pcie_of_match[] = { + {.compatible = "hisilicon,hip05-pcie",}, + {}, +}; + +MODULE_DEVICE_TABLE(of, hisi_pcie_of_match); + +static struct platform_driver hisi_pcie_driver = { + .probe = hisi_pcie_probe, + .driver = { + .name = "hisi-pcie", + .of_match_table = hisi_pcie_of_match, + }, +}; + +module_platform_driver(hisi_pcie_driver); -- cgit v1.2.3 From af1169b48b179c9db6b5d57e14552cceccbc04eb Mon Sep 17 00:00:00 2001 From: Ley Foon Tan Date: Fri, 23 Oct 2015 18:27:13 +0800 Subject: PCI: altera: Add Altera PCIe MSI driver Add Altera PCIe MSI driver. This soft IP supports a configurable number of vectors, which is a DTS parameter. [bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace] Signed-off-by: Ley Foon Tan Signed-off-by: Bjorn Helgaas Reviewed-by: Marc Zyngier Acked-by: Rob Herring --- .../devicetree/bindings/pci/altera-pcie-msi.txt | 28 ++ MAINTAINERS | 8 + drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-altera-msi.c | 312 +++++++++++++++++++++ 5 files changed, 357 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie-msi.txt create mode 100644 drivers/pci/host/pcie-altera-msi.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt new file mode 100644 index 000000000000..09cd3bc4d038 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt @@ -0,0 +1,28 @@ +* Altera PCIe MSI controller + +Required properties: +- compatible: should contain "altr,msi-1.0" +- reg: specifies the physical base address of the controller and + the length of the memory mapped region. +- reg-names: must include the following entries: + "csr": CSR registers + "vector_slave": vectors slave port region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- num-vectors: number of vectors, range 1 to 32. +- msi-controller: indicates that this is MSI controller node + + +Example +msi0: msi@0xFF200000 { + compatible = "altr,msi-1.0"; + reg = <0xFF200000 0x00000010 + 0xFF200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 42 4>; + msi-controller; + num-vectors = <32>; +}; diff --git a/MAINTAINERS b/MAINTAINERS index d8fc71ec8cb8..eeb9ec999cda 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8047,6 +8047,14 @@ L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*spear* +PCI MSI DRIVER FOR ALTERA MSI IP +M: Ley Foon Tan +L: rfi@lists.rocketboards.org (moderated for non-subscribers) +L: linux-pci@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/altera-pcie-msi.txt +F: drivers/pci/host/pcie-altera-msi.c + PCI MSI DRIVER FOR APPLIEDMICRO XGENE M: Duc Dang L: linux-pci@vger.kernel.org diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index f48e6d004425..72d81457feaa 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -154,4 +154,12 @@ config PCIE_ALTERA Say Y here if you want to enable PCIe controller support on Altera FPGA. +config PCIE_ALTERA_MSI + bool "Altera PCIe MSI feature" + depends on PCIE_ALTERA && PCI_MSI + select PCI_MSI_IRQ_DOMAIN + help + Say Y here if you want PCIe MSI support for the Altera FPGA. + This MSI driver supports Altera MSI to GIC controller IP. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 6954f7666ac1..6c4913dfd235 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o +obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o diff --git a/drivers/pci/host/pcie-altera-msi.c b/drivers/pci/host/pcie-altera-msi.c new file mode 100644 index 000000000000..2c37e8620c37 --- /dev/null +++ b/drivers/pci/host/pcie-altera-msi.c @@ -0,0 +1,312 @@ +/* + * Copyright Altera Corporation (C) 2013-2015. All rights reserved + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MSI_STATUS 0x0 +#define MSI_ERROR 0x4 +#define MSI_INTMASK 0x8 + +#define MAX_MSI_VECTORS 32 + +struct altera_msi { + DECLARE_BITMAP(used, MAX_MSI_VECTORS); + struct mutex lock; /* protect "used" bitmap */ + struct platform_device *pdev; + struct irq_domain *msi_domain; + struct irq_domain *inner_domain; + void __iomem *csr_base; + void __iomem *vector_base; + phys_addr_t vector_phy; + u32 num_of_vectors; + int irq; +}; + +static inline void msi_writel(struct altera_msi *msi, const u32 value, + const u32 reg) +{ + writel_relaxed(value, msi->csr_base + reg); +} + +static inline u32 msi_readl(struct altera_msi *msi, const u32 reg) +{ + return readl_relaxed(msi->csr_base + reg); +} + +static void altera_msi_isr(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct altera_msi *msi; + unsigned long status; + u32 num_of_vectors; + u32 bit; + u32 virq; + + chained_irq_enter(chip, desc); + msi = irq_desc_get_handler_data(desc); + num_of_vectors = msi->num_of_vectors; + + while ((status = msi_readl(msi, MSI_STATUS)) != 0) { + for_each_set_bit(bit, &status, msi->num_of_vectors) { + /* Dummy read from vector to clear the interrupt */ + readl_relaxed(msi->vector_base + (bit * sizeof(u32))); + + virq = irq_find_mapping(msi->inner_domain, bit); + if (virq) + generic_handle_irq(virq); + else + dev_err(&msi->pdev->dev, "unexpected MSI\n"); + } + } + + chained_irq_exit(chip, desc); +} + +static struct irq_chip altera_msi_irq_chip = { + .name = "Altera PCIe MSI", + .irq_mask = pci_msi_mask_irq, + .irq_unmask = pci_msi_unmask_irq, +}; + +static struct msi_domain_info altera_msi_domain_info = { + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_PCI_MSIX), + .chip = &altera_msi_irq_chip, +}; + +static void altera_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) +{ + struct altera_msi *msi = irq_data_get_irq_chip_data(data); + phys_addr_t addr = msi->vector_phy + (data->hwirq * sizeof(u32)); + + msg->address_lo = lower_32_bits(addr); + msg->address_hi = upper_32_bits(addr); + msg->data = data->hwirq; + + dev_dbg(&msi->pdev->dev, "msi#%d address_hi %#x address_lo %#x\n", + (int)data->hwirq, msg->address_hi, msg->address_lo); +} + +static int altera_msi_set_affinity(struct irq_data *irq_data, + const struct cpumask *mask, bool force) +{ + return -EINVAL; +} + +static struct irq_chip altera_msi_bottom_irq_chip = { + .name = "Altera MSI", + .irq_compose_msi_msg = altera_compose_msi_msg, + .irq_set_affinity = altera_msi_set_affinity, +}; + +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *args) +{ + struct altera_msi *msi = domain->host_data; + unsigned long bit; + u32 mask; + + WARN_ON(nr_irqs != 1); + mutex_lock(&msi->lock); + + bit = find_first_zero_bit(msi->used, msi->num_of_vectors); + if (bit >= msi->num_of_vectors) { + mutex_unlock(&msi->lock); + return -ENOSPC; + } + + set_bit(bit, msi->used); + + mutex_unlock(&msi->lock); + + irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip, + domain->host_data, handle_simple_irq, + NULL, NULL); + + mask = msi_readl(msi, MSI_INTMASK); + mask |= 1 << bit; + msi_writel(msi, mask, MSI_INTMASK); + + return 0; +} + +static void altera_irq_domain_free(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs) +{ + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct altera_msi *msi = irq_data_get_irq_chip_data(d); + u32 mask; + + mutex_lock(&msi->lock); + + if (!test_bit(d->hwirq, msi->used)) { + dev_err(&msi->pdev->dev, "trying to free unused MSI#%lu\n", + d->hwirq); + } else { + __clear_bit(d->hwirq, msi->used); + mask = msi_readl(msi, MSI_INTMASK); + mask &= ~(1 << d->hwirq); + msi_writel(msi, mask, MSI_INTMASK); + } + + mutex_unlock(&msi->lock); +} + +static const struct irq_domain_ops msi_domain_ops = { + .alloc = altera_irq_domain_alloc, + .free = altera_irq_domain_free, +}; + +static int altera_allocate_domains(struct altera_msi *msi) +{ + msi->inner_domain = irq_domain_add_linear(NULL, msi->num_of_vectors, + &msi_domain_ops, msi); + if (!msi->inner_domain) { + dev_err(&msi->pdev->dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + msi->msi_domain = pci_msi_create_irq_domain(msi->pdev->dev.of_node, + &altera_msi_domain_info, msi->inner_domain); + if (!msi->msi_domain) { + dev_err(&msi->pdev->dev, "failed to create MSI domain\n"); + irq_domain_remove(msi->inner_domain); + return -ENOMEM; + } + + return 0; +} + +static void altera_free_domains(struct altera_msi *msi) +{ + irq_domain_remove(msi->msi_domain); + irq_domain_remove(msi->inner_domain); +} + +static int altera_msi_remove(struct platform_device *pdev) +{ + struct altera_msi *msi = platform_get_drvdata(pdev); + + msi_writel(msi, 0, MSI_INTMASK); + irq_set_chained_handler(msi->irq, NULL); + irq_set_handler_data(msi->irq, NULL); + + altera_free_domains(msi); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static int altera_msi_probe(struct platform_device *pdev) +{ + struct altera_msi *msi; + struct device_node *np = pdev->dev.of_node; + struct resource *res; + int ret; + + msi = devm_kzalloc(&pdev->dev, sizeof(struct altera_msi), + GFP_KERNEL); + if (!msi) + return -ENOMEM; + + mutex_init(&msi->lock); + msi->pdev = pdev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr"); + if (!res) { + dev_err(&pdev->dev, "no csr memory resource defined\n"); + return -ENODEV; + } + + msi->csr_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(msi->csr_base)) { + dev_err(&pdev->dev, "failed to map csr memory\n"); + return PTR_ERR(msi->csr_base); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "vector_slave"); + if (!res) { + dev_err(&pdev->dev, "no vector_slave memory resource defined\n"); + return -ENODEV; + } + + msi->vector_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(msi->vector_base)) { + dev_err(&pdev->dev, "failed to map vector_slave memory\n"); + return PTR_ERR(msi->vector_base); + } + + msi->vector_phy = res->start; + + if (of_property_read_u32(np, "num-vectors", &msi->num_of_vectors)) { + dev_err(&pdev->dev, "failed to parse the number of vectors\n"); + return -EINVAL; + } + + ret = altera_allocate_domains(msi); + if (ret) + return ret; + + msi->irq = platform_get_irq(pdev, 0); + if (msi->irq <= 0) { + dev_err(&pdev->dev, "failed to map IRQ: %d\n", msi->irq); + ret = -ENODEV; + goto err; + } + + irq_set_chained_handler_and_data(msi->irq, altera_msi_isr, msi); + platform_set_drvdata(pdev, msi); + + return 0; + +err: + altera_msi_remove(pdev); + return ret; +} + +static const struct of_device_id altera_msi_of_match[] = { + { .compatible = "altr,msi-1.0", NULL }, + { }, +}; + +static struct platform_driver altera_msi_driver = { + .driver = { + .name = "altera-msi", + .of_match_table = altera_msi_of_match, + }, + .probe = altera_msi_probe, + .remove = altera_msi_remove, +}; + +static int __init altera_msi_init(void) +{ + return platform_driver_register(&altera_msi_driver); +} +subsys_initcall(altera_msi_init); + +MODULE_AUTHOR("Ley Foon Tan "); +MODULE_DESCRIPTION("Altera PCIe MSI support"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3