From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/sound/oss/CS4232 | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/sound/oss/CS4232 (limited to 'Documentation/sound/oss/CS4232') diff --git a/Documentation/sound/oss/CS4232 b/Documentation/sound/oss/CS4232 new file mode 100644 index 000000000000..7d6af7a5c1c2 --- /dev/null +++ b/Documentation/sound/oss/CS4232 @@ -0,0 +1,23 @@ +To configure the Crystal CS423x sound chip and activate its DSP functions, +modules may be loaded in this order: + + modprobe sound + insmod ad1848 + insmod uart401 + insmod cs4232 io=* irq=* dma=* dma2=* + +This is the meaning of the parameters: + + io--I/O address of the Windows Sound System (normally 0x534) + irq--IRQ of this device + dma and dma2--DMA channels (DMA2 may be 0) + +On some cards, the board attempts to do non-PnP setup, and fails. If you +have problems, use Linux' PnP facilities. + +To get MIDI facilities add + + insmod opl3 io=* + +where "io" is the I/O address of the OPL3 synthesizer. This will be shown +in /proc/sys/pnp and is normally 0x388. -- cgit v1.2.3