From 70cea0a95331fe7593f125e2d791c2d5ae454c94 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 12 Jun 2014 14:34:12 -0500 Subject: spi: qup: Add support for v1.1.1 This patch adds support for v1.1.1 of the SPI QUP controller. Signed-off-by: Andy Gross Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/qcom,spi-qup.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index b82a268f1bd4..775a2d86f502 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. Required properties: -- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1" +- compatible: Should contain: + "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. + "qcom,spi-qup-v2.1.1" for 8974 and later + "qcom,spi-qup-v2.2.1" for 8974 v2 and later. + - reg: Should contain base register location and length - interrupts: Interrupt number used by this controller -- cgit v1.2.3 From 765d52b598e1eaa8edae7aa492b99e193ea2c30b Mon Sep 17 00:00:00 2001 From: addy ke Date: Tue, 1 Jul 2014 09:02:57 +0800 Subject: spi/rockchip: add rockchip spi DT binding Signed-off-by: addy ke Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/spi-rockchip.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt new file mode 100644 index 000000000000..7bab35575817 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -0,0 +1,37 @@ +* Rockchip SPI Controller + +The Rockchip SPI controller is used to interface with various devices such as flash +and display controllers using the SPI communication interface. + +Required Properties: + +- compatible: should be one of the following. + "rockchip,rk3066-spi" for rk3066. + "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188. + "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for + the peripheral clock. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Example: + + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + }; -- cgit v1.2.3