From ab6a44ce1da48d35fe7ec95fa068aa617bd7e8dd Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 6 Jun 2011 14:35:27 -0400 Subject: Revert "mac80211: Skip tailroom reservation for full HW-crypto devices" This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6. Conflicts: net/mac80211/key.c That commit has a race that causes a warning, as documented in the thread here: http://marc.info/?l=linux-wireless&m=130717684914101&w=2 Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 3 --- net/mac80211/key.c | 21 ++------------------- net/mac80211/tx.c | 7 ++++++- 3 files changed, 8 insertions(+), 23 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2025af52b195..090b0ec1e056 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -775,9 +775,6 @@ struct ieee80211_local { int tx_headroom; /* required headroom for hardware/radiotap */ - /* count for keys needing tailroom space allocation */ - int crypto_tx_tailroom_needed_cnt; - /* Tasklet and skb queue to process calls from IRQ mode. All frames * added to skb_queue will be processed, but frames in * skb_queue_unreliable may be dropped if the total length of these diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 31afd712930d..f825e2f0a57e 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -101,11 +101,6 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key) if (!ret) { key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE; - - if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) || - (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))) - key->local->crypto_tx_tailroom_needed_cnt--; - return 0; } @@ -161,10 +156,6 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) key->conf.keyidx, sta ? sta->addr : bcast_addr, ret); key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; - - if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) || - (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))) - key->local->crypto_tx_tailroom_needed_cnt++; } void ieee80211_key_removed(struct ieee80211_key_conf *key_conf) @@ -403,10 +394,8 @@ static void __ieee80211_key_destroy(struct ieee80211_key *key) ieee80211_aes_key_free(key->u.ccmp.tfm); if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC) ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm); - if (key->local) { + if (key->local) ieee80211_debugfs_key_remove(key); - key->local->crypto_tx_tailroom_needed_cnt--; - } kfree(key); } @@ -468,8 +457,6 @@ int ieee80211_key_link(struct ieee80211_key *key, ieee80211_debugfs_key_add(key); - key->local->crypto_tx_tailroom_needed_cnt++; - ret = ieee80211_key_enable_hw_accel(key); mutex_unlock(&sdata->local->key_mtx); @@ -511,12 +498,8 @@ void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata) mutex_lock(&sdata->local->key_mtx); - sdata->local->crypto_tx_tailroom_needed_cnt = 0; - - list_for_each_entry(key, &sdata->key_list, list) { - sdata->local->crypto_tx_tailroom_needed_cnt++; + list_for_each_entry(key, &sdata->key_list, list) ieee80211_key_enable_hw_accel(key); - } mutex_unlock(&sdata->local->key_mtx); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 64e0f7587e6d..3104c844b544 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1480,7 +1480,12 @@ static int ieee80211_skb_resize(struct ieee80211_local *local, { int tail_need = 0; - if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) { + /* + * This could be optimised, devices that do full hardware + * crypto (including TKIP MMIC) need no tailroom... But we + * have no drivers for such devices currently. + */ + if (may_encrypt) { tail_need = IEEE80211_ENCRYPT_TAILROOM; tail_need -= skb_tailroom(skb); tail_need = max_t(int, tail_need, 0); -- cgit v1.2.3 From 42b70a5f6d18165a075d189d1bee82fad7cdbf29 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 26 May 2011 17:14:22 +0200 Subject: iwlagn: use cts-to-self protection on 5000 adapters series This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 1 - drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 12 ++---------- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 8 ++++++++ 3 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 5b721c56aee9..f99f9c193352 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -423,7 +423,6 @@ static struct iwl_base_params iwl5000_base_params = { }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ }; #define IWL_DEVICE_5000 \ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index b12c72d63ccb..23fa93deae96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -163,17 +163,9 @@ static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, __le16 fc, __le32 *tx_flags) { if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || - info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || + info->flags & IEEE80211_TX_CTL_AMPDU) *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } - - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation && - info->flags & IEEE80211_TX_CTL_AMPDU) { - *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } } /* Calc max signal level (dBm) among 3 possible receivers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 2532c7db3aff..018874964602 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -325,6 +325,14 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return 0; } + /* + * force CTS-to-self frames protection if RTS-CTS is not preferred + * one aggregation protection method + */ + if (!(priv->cfg->ht_params && + priv->cfg->ht_params->use_rts_for_aggregation)) + ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; + if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; -- cgit v1.2.3 From 3bb42a64960253353278876ca8da6b0a7d3bea87 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 4 Jun 2011 16:48:54 +0200 Subject: rt2x00: fix rmmod crash Avoid queue and run autowakeup_work when device is not present anymore. That prevent rmmod and device remove crash introduced by: commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde Author: Ivo van Doorn Date: Sat Apr 30 17:18:18 2011 +0200 rt2x00: Add autowake support for USB hardware Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 3 ++- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 555180d8f4aa..b704e5b183d0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -250,7 +250,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2x00link_reset_tuner(rt2x00dev, false); - if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) && (conf->flags & IEEE80211_CONF_PS)) { beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c018d67aab8e..939821b4af2f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -146,6 +146,9 @@ static void rt2x00lib_autowakeup(struct work_struct *work) struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, autowakeup_work.work); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) ERROR(rt2x00dev, "Device failed to wakeup.\n"); clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); @@ -1160,6 +1163,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) * Stop all work. */ cancel_work_sync(&rt2x00dev->intf_work); + cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); if (rt2x00_is_usb(rt2x00dev)) { del_timer_sync(&rt2x00dev->txstatus_timer); cancel_work_sync(&rt2x00dev->rxdone_work); -- cgit v1.2.3 From 51892dbbd511911c0f965a36b431fc3e8f1e4f8a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 6 Jun 2011 15:11:30 +0200 Subject: iwl4965: set tx power after rxon_assoc Setting tx power can be deferred during scan or changing channel. If after that correct tx power settings will not be sent to device, we can observe transmission problems and timeouts. Force to send tx power settings also after partial rxon change, to assure device always be configured with up-to-date settings. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=36492 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index f9db25bb35c3..e1b89220c186 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1237,7 +1237,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); iwl_legacy_print_rx_config_cmd(priv, ctx); - return 0; + goto set_tx_power; } /* If we are currently associated and the new config requires @@ -1317,6 +1317,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c iwl4965_init_sensitivity(priv); +set_tx_power: /* If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames */ ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); -- cgit v1.2.3 From bb77f6341728624314f488ebd8b4c69f2caa33ea Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 7 Jun 2011 14:03:08 -0400 Subject: Revert "mac80211: stop queues before rate control updation" This reverts commit 1d38c16ce4156f63b45abbd09dd28ca2ef5172b4. The mac80211 maintainer raised complaints about abuse of the CSA stop reason, and about whether this patch actually serves its intended purpose at all. Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 456cccf26b51..d595265d6c22 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -232,9 +232,6 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type)); } - ieee80211_stop_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); - /* channel_type change automatically detected */ ieee80211_hw_config(local, 0); @@ -248,9 +245,6 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); } - ieee80211_wake_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); - ht_opmode = le16_to_cpu(hti->operation_mode); /* if bss configuration changed store the new one */ -- cgit v1.2.3 From 4fea2e0e59dab863a63fa1638b86d850896cd861 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Tue, 31 May 2011 08:50:24 +0900 Subject: rtlwifi: Fix logic in rx_interrupt Should pass along packet if there's no CRC and no hardware error. Signed-off-by: Mike McCormack Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 89100e7c553b..3e055c6bad36 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -700,7 +700,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) rtlpci->rxbuffersize, PCI_DMA_FROMDEVICE); - if (!stats.crc || !stats.hwerror) { + if (!stats.crc && !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); -- cgit v1.2.3 From 6633d649788e72400b02098bd389585e2c56a557 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Tue, 7 Jun 2011 08:58:31 +0900 Subject: rtlwifi: Avoid modifying skbs that are resubmitted In the case we fail to allocate a new skb, the old skb should be resubmitted unmodified. Fixes bug introduced in a9e12869758430424804. Signed-off-by: Mike McCormack Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 3e055c6bad36..9f8ccae93317 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -669,6 +669,19 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) &rx_status, (u8 *) pdesc, skb); + new_skb = dev_alloc_skb(rtlpci->rxbuffersize); + if (unlikely(!new_skb)) { + RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), + DBG_DMESG, + ("can't alloc skb for rx\n")); + goto done; + } + + pci_unmap_single(rtlpci->pdev, + *((dma_addr_t *) skb->cb), + rtlpci->rxbuffersize, + PCI_DMA_FROMDEVICE); + skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc, false, HW_DESC_RXPKT_LEN)); @@ -685,21 +698,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) hdr = rtl_get_hdr(skb); fc = rtl_get_fc(skb); - /* try for new buffer - if allocation fails, drop - * frame and reuse old buffer - */ - new_skb = dev_alloc_skb(rtlpci->rxbuffersize); - if (unlikely(!new_skb)) { - RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, - ("can't alloc skb for rx\n")); - goto done; - } - pci_unmap_single(rtlpci->pdev, - *((dma_addr_t *) skb->cb), - rtlpci->rxbuffersize, - PCI_DMA_FROMDEVICE); - if (!stats.crc && !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); -- cgit v1.2.3 From 57a27e1d6a3bb9ad4efeebd3a8c71156d6207536 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 7 Jun 2011 20:42:26 +0300 Subject: nl80211: fix overflow in ssid_len When one of the SSID's length passed in a scan or sched_scan request is larger than 255, there will be an overflow in the u8 that is used to store the length before checking. This causes the check to fail and we overrun the buffer when copying the SSID. Fix this by checking the nl80211 attribute length before copying it to the struct. This is a follow up for the previous commit 208c72f4fe44fe09577e7975ba0e7fa0278f3d03, which didn't fix the problem entirely. Reported-by: Ido Yariv Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 88a565f130a5..98fa8eb6cc4b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3406,11 +3406,11 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) i = 0; if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) { - request->ssids[i].ssid_len = nla_len(attr); - if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) { + if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; goto out_free; } + request->ssids[i].ssid_len = nla_len(attr); memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr)); i++; } @@ -3572,12 +3572,11 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) { - request->ssids[i].ssid_len = nla_len(attr); - if (request->ssids[i].ssid_len > - IEEE80211_MAX_SSID_LEN) { + if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; goto out_free; } + request->ssids[i].ssid_len = nla_len(attr); memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr)); i++; -- cgit v1.2.3 From 43e4e0b94984b45d52048e3ac027cac15c718b65 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 27 May 2011 08:40:24 -0700 Subject: iwlagn: send tx power command if defer cause by RXON not match During channge channel, tx power will not send to uCode, the tx power command should send after scan complete. but should also can send after RXON command. Stable fix identified by Stanislaw Gruszka . Signed-off-by: Wey-Yi Guy Cc: stable@kernel.org [2.6.38+] Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 018874964602..09f679d6046f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -370,6 +370,11 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } memcpy(active, &ctx->staging, sizeof(*active)); + /* + * We do not commit tx power settings while channel changing, + * do it now if after settings changed. + */ + iwl_set_tx_power(priv, priv->tx_power_next, false); return 0; } -- cgit v1.2.3 From f3209bea110cade12e2b133da8b8499689cb0e2e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 8 Jun 2011 13:27:29 +0200 Subject: mac80211: fix IBSS teardown race Ignacy reports that sometimes after leaving an IBSS joining a new one didn't work because there still were stations on the list. He fixed it by flushing stations when attempting to join a new IBSS, but this shouldn't be happening in the first case. When I looked into it I saw a race condition in teardown that could cause stations to be added after flush, and thus cause this situation. Ignacy confirms that after applying my patch he hasn't seen this happen again. Reported-by: Ignacy Gawedzki Debugged-by: Ignacy Gawedzki Tested-by: Ignacy Gawedzki Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 421eaa6b0c2b..56c24cabf26d 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -965,6 +965,10 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_lock(&sdata->u.ibss.mtx); + sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH; + memset(sdata->u.ibss.bssid, 0, ETH_ALEN); + sdata->u.ibss.ssid_len = 0; + active_ibss = ieee80211_sta_active_ibss(sdata); if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) { @@ -999,8 +1003,6 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) kfree_skb(skb); skb_queue_purge(&sdata->skb_queue); - memset(sdata->u.ibss.bssid, 0, ETH_ALEN); - sdata->u.ibss.ssid_len = 0; del_timer_sync(&sdata->u.ibss.timer); -- cgit v1.2.3 From 51e65257142a87fe46a1ce5c35c86c5baf012614 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Jun 2011 15:26:31 +0200 Subject: iwlegacy: fix channel switch locking We use priv->mutex to avoid race conditions between chswitch_done() and mac_channel_switch(), when marking channel switch in progress. But chswitch_done() can be called in atomic context from rx_csa() or with mutex already taken from commit_rxon(). To fix remove mutex from chswitch_done() and use atomic bitops for marking channel switch pending. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 9 +++------ drivers/net/wireless/iwlegacy/iwl-core.c | 30 ++++++++++++---------------- drivers/net/wireless/iwlegacy/iwl-core.h | 2 +- drivers/net/wireless/iwlegacy/iwl-dev.h | 13 +----------- drivers/net/wireless/iwlegacy/iwl4965-base.c | 20 +++++++++---------- 5 files changed, 28 insertions(+), 46 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index e1b89220c186..facc94e74b07 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1218,10 +1218,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c * receive commit_rxon request * abort any previous channel switch if still in process */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); + le16_to_cpu(priv->switch_channel)); iwl_legacy_chswitch_done(priv, false); } @@ -1404,9 +1404,6 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, return rc; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - return iwl_legacy_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); } diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index 42df8321dae8..3be76bd5499a 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -859,12 +859,8 @@ void iwl_legacy_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } EXPORT_SYMBOL(iwl_legacy_chswitch_done); @@ -876,19 +872,19 @@ void iwl_legacy_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active; - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, false); - } + iwl_legacy_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_legacy_chswitch_done(priv, false); } } EXPORT_SYMBOL(iwl_legacy_rx_csa); diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h index bc66c604106c..c5fbda0760de 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.h +++ b/drivers/net/wireless/iwlegacy/iwl-core.h @@ -560,7 +560,7 @@ void iwl_legacy_free_geos(struct iwl_priv *priv); #define STATUS_SCAN_HW 15 #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 - +#define STATUS_CHANNEL_SWITCH_PENDING 18 static inline int iwl_legacy_is_ready(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h index be0106c6a2da..ea30122669ee 100644 --- a/drivers/net/wireless/iwlegacy/iwl-dev.h +++ b/drivers/net/wireless/iwlegacy/iwl-dev.h @@ -854,17 +854,6 @@ struct traffic_stats { #endif }; -/* - * iwl_switch_rxon: "channel switch" structure - * - * @ switch_in_progress: channel switch in progress - * @ channel: new channel - */ -struct iwl_switch_rxon { - bool switch_in_progress; - __le16 channel; -}; - /* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled @@ -1115,7 +1104,7 @@ struct iwl_priv { struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - struct iwl_switch_rxon switch_rxon; + __le16 switch_channel; /* 1st responses from initialize and runtime uCode images. * _4965's initialize alive response contains some calibration data. */ diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c index af2ae22fcfd3..7157ba529680 100644 --- a/drivers/net/wireless/iwlegacy/iwl4965-base.c +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c @@ -2861,16 +2861,13 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, goto out; if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) goto out; if (!iwl_legacy_is_associated_ctx(ctx)) goto out; - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out; - if (priv->cfg->ops->lib->set_channel_switch) { ch = channel->hw_value; @@ -2919,15 +2916,18 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ - if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); + if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, + &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } } } out: mutex_unlock(&priv->mutex); - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); IWL_DEBUG_MAC80211(priv, "leave\n"); } -- cgit v1.2.3