From 5990378b393429244559f4750f2ee3a50929b932 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 11 Feb 2011 10:00:02 +0200 Subject: usb: musb: fix build breakage commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index d74a8113ae74..e6400be8a0f8 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -488,6 +488,15 @@ struct musb { unsigned set_address:1; unsigned test_mode:1; unsigned softconnect:1; + + u8 address; + u8 test_mode_nr; + u16 ackpend; /* ep0 */ + enum musb_g_ep0_state ep0_state; + struct usb_gadget g; /* the gadget */ + struct usb_gadget_driver *gadget_driver; /* its driver */ +#endif + /* * FIXME: Remove this flag. * @@ -501,14 +510,6 @@ struct musb { */ unsigned double_buffer_not_ok:1 __deprecated; - u8 address; - u8 test_mode_nr; - u16 ackpend; /* ep0 */ - enum musb_g_ep0_state ep0_state; - struct usb_gadget g; /* the gadget */ - struct usb_gadget_driver *gadget_driver; /* its driver */ -#endif - struct musb_hdrc_config *config; #ifdef MUSB_CONFIG_PROC_FS -- cgit v1.2.3 From b193b412e62b134adf69af286c7e7f8e99259350 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: usb: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Johan Hovold Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc41..bc8badd16897 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3 From 3c18e30f87ac5466bddbb05cf955605efd7db025 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Feb 2011 10:26:38 -0500 Subject: USB: add quirks entry for Keytouch QWERTY Panel This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel firmware, used in the IEC 60945 keyboard. This device crashes during enumeration when the computer asks for its configuration string descriptor. Signed-off-by: Alan Stern Tested-by: kholis CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 44c595432d6f..92ce90b83126 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -68,6 +68,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Keytouch QWERTY Panel keyboard */ + { USB_DEVICE(0x0926, 0x3333), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, -- cgit v1.2.3 From acb52cb1613e1d3c8a8c650717cc51965c60d7d4 Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Mon, 7 Feb 2011 12:42:36 +0100 Subject: USB: Add Samsung SGH-I500/Android modem ID switch to visor driver [USB]Add Samsung SGH-I500/Android modem ID switch to visor driver Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the modem part of some of their Android phones. At least Galaxy Spica is affected. This modem needs ACM driver and does not work with visor driver which binds the conflicting ID for SGH-I500. Because SGH-I500 is pretty an old hardware its best to add switch to visor driver in cause somebody still wants to use that phone with Linux. Note that this is needed only when using the Android phone as modem, not in USB storage or ADB mode. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 15a5d89b7f39..1c11959a7d58 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "visor.h" /* @@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial, dbg("%s", __func__); + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); -- cgit v1.2.3 From 72a012ce0a02c6c616676a24b40ff81d1aaeafda Mon Sep 17 00:00:00 2001 From: Maciej Szmigiero Date: Sat, 5 Feb 2011 21:52:00 +0100 Subject: USB: Add quirk for Samsung Android phone modem My Galaxy Spica needs this quirk when in modem mode, otherwise it causes endless USB bus resets and is unusable in this mode. Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500 for the modem part. That's why in addition to this patch the visor driver must be prevented from binding to SPH-I500 ID, so ACM driver can do that. Signed-off-by: Maciej Szmigiero Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 92ce90b83126..81ce6a8e1d94 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -48,6 +48,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ + { USB_DEVICE(0x04e8, 0x6601), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3 From 637d11bfb814637ec7b81e878db3ffea6408a89a Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Fri, 11 Feb 2011 11:33:10 -0800 Subject: USB: Reset USB 3.0 devices on (re)discovery If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Signed-off-by: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d041c6826e43..0f299b7aad60 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,17 +2681,13 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - if (!udev->config && oldspeed == USB_SPEED_SUPER) { - /* Don't reset USB 3.0 devices during an initial setup */ - usb_set_device_state(udev, USB_STATE_DEFAULT); - } else { - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - } + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3 From 38237fd2be9421c104f84cc35665097bdce89013 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Feb 2011 15:55:07 +0100 Subject: USB: serial/usb_wwan, fix tty NULL dereference tty_port_tty_get may return without any problems NULL. Handle this case and do not oops in usb_wwan_indat_callback by dereferencing it. The oops: Unable to handle kernel paging request for data at address 0x000000d8 Faulting instruction address: 0xc0175b3c Oops: Kernel access of bad area, sig: 11 [#1] PowerPC 40x Platform last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:09.2/usb1/idVendor Modules linked in: NIP: c0175b3c LR: c0175e7c CTR: c0215c90 REGS: c77f7d50 TRAP: 0300 Not tainted (2.6.37-rc5) MSR: 00021030 CR: 88482028 XER: 2000005f DEAR: 000000d8, ESR: 00000000 TASK = c7141b90[1149] 'wvdial' THREAD: c2750000 GPR00: 00021030 c77f7e00 c7141b90 00000000 0000000e 00000000 0000000e c0410680 GPR08: c683db00 00000000 00000001 c03c81f8 88482028 10073ef4 ffffffb9 ffffff94 GPR16: 00000000 fde036c0 00200200 00100100 00000001 ffffff8d c34fabcc 00000000 GPR24: c71120d4 00000000 00000000 0000000e 00021030 00000000 00000000 0000000e NIP [c0175b3c] tty_buffer_request_room+0x2c/0x194 LR [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 Call Trace: [c77f7e00] [00000003] 0x3 (unreliable) [c77f7e30] [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 [c77f7e60] [c0215df4] usb_wwan_indat_callback+0x164/0x170 ... References: https://bugzilla.kernel.org/show_bug.cgi?id=24582 Cc: Amit Shah Cc: baoyb Signed-off-by: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb_wwan.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index b004b2a485c3..9c014e2ecd68 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb) __func__, status, endpoint); } else { tty = tty_port_tty_get(&port->port); - if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - } else - dbg("%s: empty read urb received", __func__); - tty_kref_put(tty); + if (tty) { + if (urb->actual_length) { + tty_insert_flip_string(tty, data, + urb->actual_length); + tty_flip_buffer_push(tty); + } else + dbg("%s: empty read urb received", __func__); + tty_kref_put(tty); + } /* Resubmit urb so we continue receiving */ if (status != -ESHUTDOWN) { -- cgit v1.2.3 From e1dc5157c574e7249dc1cd072fde2e48b3011533 Mon Sep 17 00:00:00 2001 From: Jon Thomas Date: Wed, 16 Feb 2011 11:02:34 -0500 Subject: sierra: add new ID for Airprime/Sierra USB IP modem I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code is 0x0f3d Looking up vendor and product id's I see: 0f3d Airprime, Incorporated 0112 CDMA 1xEVDO PC Card, PC 5220 Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might be have some common hardware with the AirPrime SL809x. Signed-off-by: Jon Thomas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7481ff8a49e4..0457813eebee 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } -- cgit v1.2.3 From 19b9a83e214d3d3ac52a56daca5ea0d033ca47bc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 11 Feb 2011 16:57:08 +0100 Subject: USB: musb: omap2430: fix kernel panic on reboot Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [] lr : [] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [] (musb_do_idle+0x24/0x138) from [] (run_timer_softirq+0x1a8/0x26) [] (run_timer_softirq+0x1a8/0x26c) from [] (__do_softirq+0x88/0x13) [] (__do_softirq+0x88/0x138) from [] (irq_exit+0x44/0x98) [] (irq_exit+0x44/0x98) from [] (asm_do_IRQ+0x7c/0xa0) [] (asm_do_IRQ+0x7c/0xa0) from [] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [] (__irq_svc+0x48/0xa8) from [] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index a3f12333fc41..bc8badd16897 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -362,6 +362,7 @@ static int omap2430_musb_init(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { + del_timer_sync(&musb_idle_timer); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- cgit v1.2.3 From 9ce4f80fb67b47b96c647ac6280a06dbd4bb50d2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 17 Feb 2011 14:39:36 -0800 Subject: Revert "USB: Reset USB 3.0 devices on (re)discovery" This reverts commit 637d11bfb814637ec7b81e878db3ffea6408a89a. Sarah wants to tweak it some more before it's applied to the tree. Cc: Luben Tuikov Cc: Sarah Sharp Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0f299b7aad60..d041c6826e43 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2681,13 +2681,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, mutex_lock(&usb_address0_mutex); - /* Reset the device; full speed may morph to high speed */ - /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ - retval = hub_port_reset(hub, port1, udev, delay); - if (retval < 0) /* error or disconnect */ - goto fail; - /* success, speed is known */ - + if (!udev->config && oldspeed == USB_SPEED_SUPER) { + /* Don't reset USB 3.0 devices during an initial setup */ + usb_set_device_state(udev, USB_STATE_DEFAULT); + } else { + /* Reset the device; full speed may morph to high speed */ + /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ + retval = hub_port_reset(hub, port1, udev, delay); + if (retval < 0) /* error or disconnect */ + goto fail; + /* success, speed is known */ + } retval = -ENODEV; if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { -- cgit v1.2.3