From c3c4f22b7c814a6ee485ce294065836f8ede30fa Mon Sep 17 00:00:00 2001 From: Devyn Liu Date: Tue, 30 Jul 2024 11:20:39 +0800 Subject: spi: hisi-kunpeng: Add validation for the minimum value of speed_hz The speed specified by the user is used to calculate the clk_div based on the max_speed_hz in hisi_calc_effective_speed. A very low speed value can lead to a clk_div larger than the variable range. Avoid this by setting the min_speed_hz so that such a small speed value is rejected. __spi_validate() in spi.c will return -EINVAL for the specified speed_hz lower than min_speed_hz. Signed-off-by: Devyn Liu Reviewed-by: Jay Fang Link: https://patch.msgid.link/20240730032040.3156393-2-liudingyuan@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi-hisi-kunpeng.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c index 77e9738e42f6..6910b4d4c427 100644 --- a/drivers/spi/spi-hisi-kunpeng.c +++ b/drivers/spi/spi-hisi-kunpeng.c @@ -495,6 +495,7 @@ static int hisi_spi_probe(struct platform_device *pdev) host->transfer_one = hisi_spi_transfer_one; host->handle_err = hisi_spi_handle_err; host->dev.fwnode = dev->fwnode; + host->min_speed_hz = DIV_ROUND_UP(host->max_speed_hz, CLK_DIV_MAX); hisi_spi_hw_init(hs); -- cgit v1.2.3 From 5127c42c77de18651aa9e8e0a3ced190103b449c Mon Sep 17 00:00:00 2001 From: Devyn Liu Date: Tue, 30 Jul 2024 11:20:40 +0800 Subject: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned. Signed-off-by: Devyn Liu Reviewed-by: Jay Fang Link: https://patch.msgid.link/20240730032040.3156393-3-liudingyuan@huawei.com Signed-off-by: Mark Brown --- drivers/spi/spi-hisi-kunpeng.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-hisi-kunpeng.c b/drivers/spi/spi-hisi-kunpeng.c index 6910b4d4c427..16054695bdb0 100644 --- a/drivers/spi/spi-hisi-kunpeng.c +++ b/drivers/spi/spi-hisi-kunpeng.c @@ -481,6 +481,9 @@ static int hisi_spi_probe(struct platform_device *pdev) return -EINVAL; } + if (host->max_speed_hz == 0) + return dev_err_probe(dev, -EINVAL, "spi-max-frequency can't be 0\n"); + ret = device_property_read_u16(dev, "num-cs", &host->num_chipselect); if (ret) -- cgit v1.2.3 From e4c4638b6a10427d30e29d22351c375886025f47 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 30 Jul 2024 15:35:47 +0200 Subject: spi: spidev: Add missing spi_device_id for bh2228fv When the of_device_id entry for "rohm,bh2228fv" was added, the corresponding spi_device_id was forgotten, causing a warning message during boot-up: SPI driver spidev has no spi_device_id for rohm,bh2228fv Fix module autoloading and shut up the warning by adding the missing entry. Fixes: fc28d1c1fe3b3e2f ("spi: spidev: add correct compatible for Rohm BH2228FV") Signed-off-by: Geert Uytterhoeven Link: https://patch.msgid.link/cb571d4128f41175f31319cd9febc829417ea167.1722346539.git.geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 05e6d007f9a7..5304728c68c2 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -700,6 +700,7 @@ static const struct class spidev_class = { }; static const struct spi_device_id spidev_spi_ids[] = { + { .name = "bh2228fv" }, { .name = "dh2228fv" }, { .name = "ltc2488" }, { .name = "sx1301" }, -- cgit v1.2.3 From 730bbfaf7d4890bd99e637db7767dc68cfeb24e7 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 4 Aug 2024 13:36:11 +0200 Subject: spi: spi-fsl-lpspi: Fix scldiv calculation The effective SPI clock frequency should never exceed speed_hz otherwise this might result in undefined behavior of the SPI device. Currently the scldiv calculation could violate this constraint. For the example parameters perclk_rate = 24 MHz and speed_hz = 7 MHz, the function fsl_lpspi_set_bitrate will determine perscale = 0 and scldiv = 1, which is a effective SPI clock of 8 MHz. So fix this by rounding up the quotient of perclk_rate and speed_hz. While this never change within the loop, we can pull this out. Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Stefan Wahren Link: https://patch.msgid.link/20240804113611.83613-1-wahrenst@gmx.net Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-lpspi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 32baa14dfd83..be261ac09df8 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -296,7 +296,7 @@ static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi) static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) { struct lpspi_config config = fsl_lpspi->config; - unsigned int perclk_rate, scldiv; + unsigned int perclk_rate, scldiv, div; u8 prescale; perclk_rate = clk_get_rate(fsl_lpspi->clk_per); @@ -313,8 +313,10 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) return -EINVAL; } + div = DIV_ROUND_UP(perclk_rate, config.speed_hz); + for (prescale = 0; prescale < 8; prescale++) { - scldiv = perclk_rate / config.speed_hz / (1 << prescale) - 2; + scldiv = div / (1 << prescale) - 2; if (scldiv < 256) { fsl_lpspi->config.prescale = prescale; break; -- cgit v1.2.3