| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
|
|
The only user of these was io_uring, and it's not using them anymore.
Make them static and remove them from the socket header file.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/1b6089d3-c1cf-464a-abd3-b0f0b6bb2523@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the Andes AX45 JSON files that allows specifying symbolic event
names for the raw PMU events.
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-11-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-5-namhyung@kernel.org
|
|
It's not used anymore and the code is coverted to use a hash map. Now
sym_hist has a static size, so no need to have sizeof_sym_hist in the
struct annotated_source.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-4-namhyung@kernel.org
|
|
Use annotated_source.samples hashmap instead of addr array in the
struct sym_hist.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-3-namhyung@kernel.org
|
|
Now symbol histogram uses an array to save per-offset sample counts.
But it wastes a lot of memory if the symbol has a few samples only.
Add a hashmap to save values only for actual samples.
For now, it has duplicate histogram (one in the existing array and
another in the new hash map). Once it can convert to use the hash
in all places, we can get rid of the array later.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-2-namhyung@kernel.org
|
|
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc568f ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
|
|
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
|
|
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
|
|
Move thread_rb_node into the machine.c file. This hides the
implementation of threads from the rest of the code allowing for it to
be refactored.
Locking discipline is tightened up in this change. As the lock is now
encapsulated in threads, the findnew function requires holding it (as
it already did in machine). Rather than do conditionals with locks
based on whether the thread should be created (which could potentially
be error prone with a read lock match with a write unlock), have a
separate threads__find that won't create the thread and only holds the
read lock. This effectively duplicates the findnew logic, with the
existing findnew logic only operating under a write lock assuming
creation is necessary as a previous find failed. The creation may
still fail with the write lock due to another thread. The duplication
is removed in a later next patch that delegates the implementation to
hashtable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-5-irogers@google.com
|
|
Avoid exposing the threads data structure by switching to the callback
machine__for_each_thread approach. machine__fprintf is only used in
tests and verbose >3 output so don't turn to list and sort. Add
machine__threads_nr to be refactored later.
Note, all existing *_fprintf routines ignore fprintf errors.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-4-irogers@google.com
|
|
Commit 91e467bc568f ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf trace
--summary output sorts and prints each hash bucket, rather than all
threads globally. Change this behavior by turn all threads into a
list, sort the list by number of trace events then by tids, finally
print the list. This also allows the rbtree in threads to be not
accessed outside of machine.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-3-irogers@google.com
|
|
Commit 91e467bc568f ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf report
--tasks output now shows child threads in an order determined by the
hashing. For example, in this snippet tid 3 appears after tid 256 even
though they have the same ppid 2:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
2 2 0 | kthreadd
256 256 2 | kworker/12:1H-k
693761 693761 2 | kworker/10:1-mm
1301762 1301762 2 | kworker/1:1-mm_
1302530 1302530 2 | kworker/u32:0-k
3 3 2 | rcu_gp
...
```
The output is easier to read if threads appear numerically
increasing. To allow for this, read all threads into a list then sort
with a comparator that orders by the child task's of the first common
parent. The list creation and deletion are created as utilities on
machine. The indentation is possible by counting the number of
parents a child has.
With this change the output for the same data file is now like:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
1 1 0 | systemd
823 823 1 | systemd-journal
853 853 1 | systemd-udevd
3230 3230 1 | systemd-timesyn
3236 3236 1 | auditd
3239 3239 3236 | audisp-syslog
3321 3321 1 | accounts-daemon
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-2-irogers@google.com
|
|
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c313 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
|
|
This is useful for scripts that work with Perf and ETM trace. Rather
than them trying to parse Perf's error output at runtime to see if it
was linked or not.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: al.grant@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301133829.346286-1-james.clark@arm.com
|
|
UMasks were being dropped leading to all PCU
UNC_P_POWER_STATE_OCCUPANCY events having the same encoding. Don't
drop the umask trying to be consistent with other sources of events
like libpfm4 [1]. Older models need to use occ_sel rather than umask,
correct these values too. This applies the change from [2].
[1] https://sourceforge.net/p/perfmon2/libpfm4/ci/master/tree/lib/events/intel_skx_unc_pcu_events.h#l30
[2] https://github.com/captain5050/perfmon/commit/cbd4aee81023e5bfa09677b1ce170ff69e9c423d
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240228170529.4035675-1-irogers@google.com
|
|
The find will get the map, ensure puts are done on all paths.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229062048.558799-1-irogers@google.com
|
|
Currently it accounts the contention using delta between timestamps in
lock:contention_begin and lock:contention_end tracepoints. But it means
the lock should see the both events during the monitoring period.
Actually there are 4 cases that happen with the monitoring:
monitoring period
/ \
| |
1: B------+-----------------------+--------E
2: B----+-------------E |
3: | B-----------+----E
4: | B-------------E |
| |
t0 t1
where B and E mean contention BEGIN and END, respectively. So it only
accounts the case 4 for now. It seems there's no way to handle the case
1. The case 2 might be handled if it saved the timestamp (t0), but it
lacks the information from the B notably the flags which shows the lock
types. Also it could be a nested lock which it currently ignores. So
I think we should ignore the case 2.
However we can handle the case 3 if we save the timestamp (t1) at the
end of the period. And then it can iterate the map entries in the
userspace and update the lock stat accordinly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviwed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240228053335.312776-1-namhyung@kernel.org
|
|
A metric may have no events, for example, the transaction metrics on
x86 are dependent on there being TSX events. Fix a segv where an evsel
of NULL is dereferenced for a metric leader value.
Fixes: a59fb796a36b ("perf metrics: Compute unmerged uncore metrics individually")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-2-irogers@google.com
|
|
The metric match function fails for cases like looking for "metric" in
the string "all;foo_metric;metric" as the "metric" in "foo_metric"
matches but isn't preceeded by a ';'. Fix this by matching the first
list item and recursively matching on failure the next item after a
semicolon.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-1-irogers@google.com
|
|
The commit in Fixes has reordered some code, but missed an error handling
path.
'goto err' now, in order to avoid a memory leak in case of error.
Fixes: f63a536f03a2 ("perf pmu: Merge JSON events with sysfs at load time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/9538b2b634894c33168dfe9d848d4df31fd4d801.1693085544.git.christophe.jaillet@wanadoo.fr
|
|
There is a spelling mistake in a pr_debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: kernel-janitors@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240226105326.3944887-1-colin.i.king@gmail.com
|
|
Just to make things clearer, return TEST_FAIL (-1) instead of an open
coded -1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdepeMsjagbf1ufD@x1
|
|
Arm64 doesn't have Model in /proc/cpuinfo and, thus, cpu_desc doesn't get
assigned.
Running
$ perf data convert --to-json perf.data.json
ends up calling output_json_string() with NULL pointer, which causes a
segmentation fault.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Evgeny Pistun <kotborealis@awooo.ru>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240223220458.15282-1-ilkka@os.amperecomputing.com
|
|
When building BPF skels perf will, by default, install a minimalistic
vmlinux.h file with the types needed by the BPF skels in
tools/perf/util/bpf_skel/ in its build directory.
When 29d16de26df17e94 ("perf augmented_raw_syscalls.bpf: Move 'struct
timespec64' to vmlinux.h") was added, a type used in the augmented_raw_syscalls
BPF skel, 'struct timespec64' was not found when building from a pre-existing
build directory, because the vmlinux.h there didn't contain that type,
ending up with this error, spotted in linux-next:
CLANG /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:29: note: forward declaration of 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:29: note: forward declaration of 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^
2 errors generated.
make[2]: *** [Makefile.perf:1158: /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:261: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
So add a Makefile dependency (Namhyung's suggestion) to make sure that
the new tools/perf/util/bpf_skel/vmlinux/vmlinux.h minimal vmlinux is
updated in the build directory, providing the moved 'struct timespec64'
type.
Fixes: 29d16de26df17e94 ("perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdoPrWg-qYFpBJbz@x1
|
|
In Makefiles, $(error ), $(warning ), and $(info ) expand to the empty
string, as explained in the GNU Make manual [1]:
"The result of the expansion of this function is the empty string."
Therefore, they are no-op except for logging purposes.
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is no-op except for creating the directory.
Remove meaningless assignments.
[1]: https://www.gnu.org/software/make/manual/make.html#Make-Control-Functions
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240221134201.2656908-1-masahiroy@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.
PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:
(a) Many PMUs lack support for any event filtering, and require all
perf_event_attr::exclude_* bits to be clear. This includes Alpha's
CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
ARMv7,
(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
requires that perf_event_attr::exclude_kernel is set.
(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
set as the hardware PMU does not count while a guest is running (but
might be extended in future to do so).
In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.
Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.
Since commit:
82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:
5c816728651ae425 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")
Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.
This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.
I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.
Note that this does not remove the need for commit:
a24d9d9dc096fc0d ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).
Fixes: 82fe2e45cdb00de4 ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
|
|
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-9-irogers@google.com
|
|
Rather than special shell test logic, do a single pass to create an
array of test suites. Hold the shell test file name in the test suite
priv field. This makes the special shell test logic in builtin-test.c
redundant so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-8-irogers@google.com
|
|
Avoid filename appending buffers by using openat, faccessat and
scandirat more widely. Turn the script's path back to a file name
using readlink from /proc/<pid>/fd/<fd>.
Read the script's description using api/io.h to avoid fdopen
conversions. Whilst reading perform additional sanity checks on the
script's contents.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-7-irogers@google.com
|
|
builtin-test-list is primarily concerned with shell script
tests. Rename the file to better reflect this and add a missed header
guard.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-6-irogers@google.com
|
|
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
|
|
scandirat is used during the printing of tracepoint events but may be
missing from certain libcs. Add a compatibility implementation that
uses the symlink of an fd in /proc as a path for the reliably present
scandir.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-3-irogers@google.com
|
|
Scanning /proc is inherently racy. Scanning /proc/pid/task within that
is also racy as the pid can terminate. Rather than failing in
__thread_map__new_all_cpus, skip pids for such failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-2-irogers@google.com
|
|
Correct the short description of the following events:
DCW_REQ, DCW_REQ_CHIP_HIT, DCW_REQ_DRAWER_HIT, DCW_REQ_IV,
DCW_ON_CHIP, DCW_ON_CHIP_IV, DCW_ON_CHIP_CHIP_HIT,
DCW_ON_CHIP_DRAWER_HIT, CW_ON_MODULE, DCW_ON_DRAWER,
DCW_OFF_DRAWER, IDCW_ON_MODULE_IV, IDCW_ON_MODULE_CHIP_HIT,
IDCW_ON_MODULE_DRAWER_HIT, IDCW_ON_DRAWER_IV, IDCW_ON_DRAWER_CHIP_HIT,
IDCW_ON_DRAWER_DRAWER_HIT, IDCW_OFF_DRAWER_IV, IDCW_OFF_DRAWER_CHIP_HIT,
IDCW_OFF_DRAWER_DRAWER_HIT, ICW_REQ, ICW_REQ_IV, CW_REQ_CHIP_HIT,
ICW_REQ_DRAWER_HIT, ICW_ON_CHIP, ICW_ON_CHIP_IV, ICW_ON_CHIP_CHIP_HIT,
ICW_ON_CHIP_DRAWER_HIT, ICW_ON_MODULE and ICW_OFF_DRAWER.
The second Cache should be L2-Cache.
Output before (display diff of the first four events)
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from Cache with Intervention. \
Unit: cpum_cf]
Output after:
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from L2-Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from L2-Cache with \
Intervention. Unit: cpum_cf]
Fixes: 7f76b3113068 ("perf list: Add IBM z16 event description for s390")
Reported-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221091908.1759083-1-tmricht@linux.ibm.com
|
|
Aggregation index was being computed using the evsel's cpumap which
may have a different (typically the same or fewer) entries.
Before:
```
$ perf stat --metric-only -A -M memory_bandwidth_total -a sleep 1
Performance counter stats for 'system wide':
MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total
CPU0 12.8 0.0 12.9 12.7 0.0 12.6
CPU1
1.007806367 seconds time elapsed
```
After:
```
$ perf stat --metric-only -A -M memory_bandwidth_total -a sleep 1
Performance counter stats for 'system wide':
MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total MB/s memory_bandwidth_total
CPU0 15.4 0.0 15.3 15.0 0.0 14.9
CPU18 0.0 0.0 13.5 5.2 0.0 11.9
1.007858736 seconds time elapsed
```
Signed-off-by: Ian Rogers <irogers@google.com> |
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221070754.4163916-3-irogers@google.com
|
|
When merging counts from multiple uncore PMUs the metric is only
computed for the metric leader. When merging/aggregation is disabled,
prior to this patch just the leader's metric would be computed. Fix
this by computing the metric for each PMU.
On a SkylakeX:
Before:
```
$ perf stat -A -M memory_bandwidth_total -a sleep 1
Performance counter stats for 'system wide':
CPU0 82,217 UNC_M_CAS_COUNT.RD [uncore_imc_0] # 9.2 MB/s memory_bandwidth_total
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_0] # 0.0 MB/s memory_bandwidth_total
CPU0 61,395 UNC_M_CAS_COUNT.WR [uncore_imc_0]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_0]
CPU0 0 UNC_M_CAS_COUNT.RD [uncore_imc_1]
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_1]
CPU0 0 UNC_M_CAS_COUNT.WR [uncore_imc_1]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_1]
CPU0 81,570 UNC_M_CAS_COUNT.RD [uncore_imc_2]
CPU18 113,886 UNC_M_CAS_COUNT.RD [uncore_imc_2]
CPU0 62,330 UNC_M_CAS_COUNT.WR [uncore_imc_2]
CPU18 66,942 UNC_M_CAS_COUNT.WR [uncore_imc_2]
CPU0 75,489 UNC_M_CAS_COUNT.RD [uncore_imc_3]
CPU18 27,958 UNC_M_CAS_COUNT.RD [uncore_imc_3]
CPU0 55,864 UNC_M_CAS_COUNT.WR [uncore_imc_3]
CPU18 38,727 UNC_M_CAS_COUNT.WR [uncore_imc_3]
CPU0 0 UNC_M_CAS_COUNT.RD [uncore_imc_4]
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_4]
CPU0 0 UNC_M_CAS_COUNT.WR [uncore_imc_4]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_4]
CPU0 75,423 UNC_M_CAS_COUNT.RD [uncore_imc_5]
CPU18 104,527 UNC_M_CAS_COUNT.RD [uncore_imc_5]
CPU0 57,596 UNC_M_CAS_COUNT.WR [uncore_imc_5]
CPU18 56,777 UNC_M_CAS_COUNT.WR [uncore_imc_5]
CPU0 1,003,440,851 ns duration_time
1.003440851 seconds time elapsed
```
After:
```
$ perf stat -A -M memory_bandwidth_total -a sleep 1
Performance counter stats for 'system wide':
CPU0 88,968 UNC_M_CAS_COUNT.RD [uncore_imc_0] # 9.5 MB/s memory_bandwidth_total
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_0] # 0.0 MB/s memory_bandwidth_total
CPU0 59,498 UNC_M_CAS_COUNT.WR [uncore_imc_0]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_0]
CPU0 0 UNC_M_CAS_COUNT.RD [uncore_imc_1] # 0.0 MB/s memory_bandwidth_total
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_1] # 0.0 MB/s memory_bandwidth_total
CPU0 0 UNC_M_CAS_COUNT.WR [uncore_imc_1]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_1]
CPU0 88,635 UNC_M_CAS_COUNT.RD [uncore_imc_2] # 9.5 MB/s memory_bandwidth_total
CPU18 117,975 UNC_M_CAS_COUNT.RD [uncore_imc_2] # 11.5 MB/s memory_bandwidth_total
CPU0 60,829 UNC_M_CAS_COUNT.WR [uncore_imc_2]
CPU18 62,105 UNC_M_CAS_COUNT.WR [uncore_imc_2]
CPU0 82,238 UNC_M_CAS_COUNT.RD [uncore_imc_3] # 8.7 MB/s memory_bandwidth_total
CPU18 22,906 UNC_M_CAS_COUNT.RD [uncore_imc_3] # 3.6 MB/s memory_bandwidth_total
CPU0 53,959 UNC_M_CAS_COUNT.WR [uncore_imc_3]
CPU18 32,990 UNC_M_CAS_COUNT.WR [uncore_imc_3]
CPU0 0 UNC_M_CAS_COUNT.RD [uncore_imc_4] # 0.0 MB/s memory_bandwidth_total
CPU18 0 UNC_M_CAS_COUNT.RD [uncore_imc_4] # 0.0 MB/s memory_bandwidth_total
CPU0 0 UNC_M_CAS_COUNT.WR [uncore_imc_4]
CPU18 0 UNC_M_CAS_COUNT.WR [uncore_imc_4]
CPU0 83,595 UNC_M_CAS_COUNT.RD [uncore_imc_5] # 8.9 MB/s memory_bandwidth_total
CPU18 110,151 UNC_M_CAS_COUNT.RD [uncore_imc_5] # 10.5 MB/s memory_bandwidth_total
CPU0 56,540 UNC_M_CAS_COUNT.WR [uncore_imc_5]
CPU18 53,816 UNC_M_CAS_COUNT.WR [uncore_imc_5]
CPU0 1,003,353,416 ns duration_time
```
Signed-off-by: Ian Rogers <irogers@google.com> |
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221070754.4163916-2-irogers@google.com
|
|
Pass metric_expr and evsel rather than specific variables from the
struct, thereby reducing the number of arguments. This will enable
later fixes.
To reduce the size of the diff, local variables are added to match the
previous parameter names. This isn't done in the case of "name" as
evsel->name is more intention revealing. A whitespace issue is also
addressed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221070754.4163916-1-irogers@google.com
|
|
Now perf can show assembly instructions with libcapstone for x86, and the
capstone is better in general.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-6-changbin.du@huawei.com
|
|
Now '--insn-trace' accept a argument to specify the output format:
- raw: display raw instructions.
- disasm: display mnemonic instructions (if capstone is installed).
$ sudo perf script --insn-trace=raw
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: 48 89 e7
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: e8 e8 0c 00 00
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: f3 0f 1e fa
$ sudo perf script --insn-trace=disasm
ls 1443864 [006] 2275506.209908875: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908875: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
ls 1443864 [006] 2275506.209908875: 7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) illegal instruction
ls 1443864 [006] 2275506.209908875: 7f216b426df4 _dl_start+0x4 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df5 _dl_start+0x5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rbp
ls 1443864 [006] 2275506.209908875: 7f216b426df8 _dl_start+0x8 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) pushq %r15
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-5-changbin.du@huawei.com
|
|
In addition to the 'insn' field, this adds a new field 'disasm' to
display mnemonic instructions instead of the raw code.
$ sudo perf script -F +disasm
perf-exec 1443864 [006] 2275506.209848: psb: psb offs: 0 0 [unknown] ([unknown])
perf-exec 1443864 [006] 2275506.209848: cbr: cbr: 41 freq: 4100 MHz (114%) 0 [unknown] ([unknown])
ls 1443864 [006] 2275506.209905: 1 branches:uH: 7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) movq %rsp, %rdi
ls 1443864 [006] 2275506.209908: 1 branches:uH: 7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) callq _dl_start+0x0
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-4-changbin.du@huawei.com
|
|
Currently, the instructions of samples are shown as raw hex strings
which are hard to read. x86 has a special option '--xed' to disassemble
the hex string via intel XED tool.
Here we use capstone as our disassembler engine to give more friendly
instructions. We select libcapstone because capstone can provide more
insn details. Perf will fallback to raw instructions if libcapstone is
not available.
The advantages compared to XED tool:
* Support arm, arm64, x86-32, x86_64 (more could be supported),
xed only for x86_64.
* Immediate address operands are shown as symbol+offs.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-3-changbin.du@huawei.com
|
|
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
|
|
If perf list is invoked with 'metricgroups' include the description
unless it is invoked with flags to exclude it. Make the description of
metricgroup dumping dependent on the desc flag in print_state as with
metrics.
Before:
```
$ perf list metricgroups
List of pre-defined events (to be used in -e or -M):
Metric Groups:
Backend
Bad
BadSpec
...
```
After:
```
$ perf list metricgroups
List of pre-defined events (to be used in -e or -M):
Metric Groups:
Backend [Grouping from Top-down Microarchitecture Analysis Metrics spreadsheet]
Bad [Grouping from Top-down Microarchitecture Analysis Metrics spreadsheet]
BadSpec
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240216192044.119897-1-irogers@google.com
|
|
I got a strange error on ARM to fail on processing FINISHED_ROUND
record. It turned out that it was failing in symbol__alloc_hist()
because the symbol size is too big.
When a sample is captured on a specific BPF program, it failed. I've
added a debug code and found the end address of the symbol is from
the next module which is placed far way.
ffff800008795778-ffff80000879d6d8: bpf_prog_1bac53b8aac4bc58_netcg_sock [bpf]
ffff80000879d6d8-ffff80000ad656b4: bpf_prog_76867454b5944e15_netcg_getsockopt [bpf]
ffff80000ad656b4-ffffd69b7af74048: bpf_prog_1d50286d2eb1be85_hn_egress [bpf] <---------- here
ffffd69b7af74048-ffffd69b7af74048: $x.5 [sha3_generic]
ffffd69b7af74048-ffffd69b7af740b8: crypto_sha3_init [sha3_generic]
ffffd69b7af740b8-ffffd69b7af741e0: crypto_sha3_update [sha3_generic]
The logic in symbols__fixup_end() just uses curr->start to update the
prev->end. But in this case, it won't work as it's too different.
I think ARM has a different kernel memory layout for modules and BPF
than on x86. Actually there's a logic to handle kernel and module
boundary. Let's do the same for symbols between different modules.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Leo Yan <leo.yan@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240212233322.1855161-1-namhyung@kernel.org
|
|
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140
https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-31-irogers@google.com
|
|
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140
https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-30-irogers@google.com
|
|
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140
https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-29-irogers@google.com
|
