| Age | Commit message (Collapse) | Author |
|---|
|
Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable
bitfields. Missing breaks in a switch caused 8-byte reads always. This can
confuse libbpf because it does strict checks that memory load size corresponds
to the original size of the field, which in this case quite often would be
wrong.
After fixing that, we run into another problem, which quite subtle, so worth
documenting here. The issue is in Clang optimization and CO-RE relocation
interactions. Without that asm volatile construct (also known as
barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and
will apply BYTE_OFFSET 4 times for each switch case arm. This will result in
the same error from libbpf about mismatch of memory load size and original
field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *),
*(u32 *), and *(u64 *) memory loads, three of which will fail. Using
barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to
calculate p, after which value of p is used without relocation in each of
switch case arms, doing appropiately-sized memory load.
Here's the list of relevant relocations and pieces of generated BPF code
before and after this patch for test_core_reloc_bitfields_direct selftests.
BEFORE
=====
#45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
#46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
160: b7 02 00 00 04 00 00 00 r2 = 4
; BYTE_SIZE relocation here ^^^
161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63>
162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65>
163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66>
164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69>
0000000000000528 <LBB0_66>:
165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69>
0000000000000548 <LBB0_63>:
169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67>
170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68>
171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69>
0000000000000560 <LBB0_68>:
172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69>
0000000000000580 <LBB0_65>:
176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8)
; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^
179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
00000000000005a0 <LBB0_67>:
180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8)
; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^
00000000000005b8 <LBB0_69>:
183: 67 01 00 00 20 00 00 00 r1 <<= 32
184: b7 02 00 00 00 00 00 00 r2 = 0
185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
186: c7 01 00 00 20 00 00 00 r1 s>>= 32
187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000005e0 <LBB0_71>:
188: 77 01 00 00 20 00 00 00 r1 >>= 32
AFTER
=====
#30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32
#31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32
129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll
131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1
132: b7 01 00 00 08 00 00 00 r1 = 8
; BYTE_OFFSET relo here ^^^
; no size check for non-memory dereferencing instructions
133: 0f 12 00 00 00 00 00 00 r2 += r1
134: b7 03 00 00 04 00 00 00 r3 = 4
; BYTE_SIZE relocation here ^^^
135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63>
136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65>
137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66>
138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69>
0000000000000458 <LBB0_66>:
139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69>
0000000000000468 <LBB0_63>:
141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67>
142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68>
143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69>
0000000000000480 <LBB0_68>:
144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69>
0000000000000490 <LBB0_65>:
146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69>
00000000000004a0 <LBB0_67>:
148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0)
; NO CO-RE relocation here ^^^^^^^^^^^^^^^^
00000000000004a8 <LBB0_69>:
149: 67 01 00 00 20 00 00 00 r1 <<= 32
150: b7 02 00 00 00 00 00 00 r2 = 0
151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71>
152: c7 01 00 00 20 00 00 00 r1 s>>= 32
153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72>
00000000000004d0 <LBB0_71>:
154: 77 01 00 00 20 00 00 00 r1 >>= 323
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org
|
|
Add BTF_KIND_FLOAT support when doing CO-RE field type compatibility check.
Without this, relocations against float/double fields will fail.
Also adjust one error message to emit instruction index instead of less
convenient instruction byte offset.
Fixes: 22541a9eeb0d ("libbpf: Add BTF_KIND_FLOAT support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210426192949.416837-3-andrii@kernel.org
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add extra logic to handle map externs (only BTF-defined maps are supported for
linking). Re-use the map parsing logic used during bpf_object__open(). Map
externs are currently restricted to always match complete map definition. So
all the specified attributes will be compared (down to pining, map_flags,
numa_node, etc). In the future this restriction might be relaxed with no
backwards compatibility issues. If any attribute is mismatched between extern
and actual map definition, linker will report an error, pointing out which one
mismatches.
The original intent was to allow for extern to specify attributes that matters
(to user) to enforce. E.g., if you specify just key information and omit
value, then any value fits. Similarly, it should have been possible to enforce
map_flags, pinning, and any other possible map attribute. Unfortunately, that
means that multiple externs can be only partially overlapping with each other,
which means linker would need to combine their type definitions to end up with
the most restrictive and fullest map definition. This requires an extra amount
of BTF manipulation which at this time was deemed unnecessary and would
require further extending generic BTF writer APIs. So that is left for future
follow ups, if there will be demand for that. But the idea seems intresting
and useful, so I want to document it here.
Weak definitions are also supported, but are pretty strict as well, just
like externs: all weak map definitions have to match exactly. In the follow up
patches this most probably will be relaxed, with __weak map definitions being
able to differ between each other (with non-weak definition always winning, of
course).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-13-andrii@kernel.org
|
|
Add BPF static linker logic to resolve extern variables and functions across
multiple linked together BPF object files.
For that, linker maintains a separate list of struct glob_sym structures,
which keeps track of few pieces of metadata (is it extern or resolved global,
is it a weak symbol, which ELF section it belongs to, etc) and ties together
BTF type info and ELF symbol information and keeps them in sync.
With adding support for extern variables/funcs, it's now possible for some
sections to contain both extern and non-extern definitions. This means that
some sections may start out as ephemeral (if only externs are present and thus
there is not corresponding ELF section), but will be "upgraded" to actual ELF
section as symbols are resolved or new non-extern definitions are appended.
Additional care is taken to not duplicate extern entries in sections like
.kconfig and .ksyms.
Given libbpf requires BTF type to always be present for .kconfig/.ksym
externs, linker extends this requirement to all the externs, even those that
are supposed to be resolved during static linking and which won't be visible
to libbpf. With BTF information always present, static linker will check not
just ELF symbol matches, but entire BTF type signature match as well. That
logic is stricter that BPF CO-RE checks. It probably should be re-used by
.ksym resolution logic in libbpf as well, but that's left for follow up
patches.
To make it unnecessary to rewrite ELF symbols and minimize BTF type
rewriting/removal, ELF symbols that correspond to externs initially will be
updated in place once they are resolved. Similarly for BTF type info, VAR/FUNC
and var_secinfo's (sec_vars in struct bpf_linker) are staying stable, but
types they point to might get replaced when extern is resolved. This might
leave some left-over types (even though we try to minimize this for common
cases of having extern funcs with not argument names vs concrete function with
names properly specified). That can be addresses later with a generic BTF
garbage collection. That's left for a follow up as well.
Given BTF type appending phase is separate from ELF symbol
appending/resolution, special struct glob_sym->underlying_btf_id variable is
used to communicate resolution and rewrite decisions. 0 means
underlying_btf_id needs to be appended (it's not yet in final linker->btf), <0
values are used for temporary storage of source BTF type ID (not yet
rewritten), so -glob_sym->underlying_btf_id is BTF type id in obj-btf. But by
the end of linker_append_btf() phase, that underlying_btf_id will be remapped
and will always be > 0. This is the uglies part of the whole process, but
keeps the other parts much simpler due to stability of sec_var and VAR/FUNC
types, as well as ELF symbol, so please keep that in mind while reviewing.
BTF-defined maps require some extra custom logic and is addressed separate in
the next patch, so that to keep this one smaller and easier to review.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-12-andrii@kernel.org
|
|
It should never fail, but if it does, it's better to know about this rather
than end up with nonsensical type IDs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-11-andrii@kernel.org
|
|
Add logic to validate extern symbols, plus some other minor extra checks, like
ELF symbol #0 validation, general symbol visibility and binding validations.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-10-andrii@kernel.org
|
|
Make skip_mods_and_typedefs(), btf_kind_str(), and btf_func_linkage() helpers
available outside of libbpf.c, to be used by static linker code.
Also do few cleanups (error code fixes, comment clean up, etc) that don't
deserve their own commit.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-9-andrii@kernel.org
|
|
Factor out logic for sanity checking SHT_SYMTAB and SHT_REL sections into
separate sections. They are already quite extensive and are suffering from too
deep indentation. Subsequent changes will extend SYMTAB sanity checking
further, so it's better to factor each into a separate function.
No functional changes are intended.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-8-andrii@kernel.org
|
|
Refactor BTF-defined maps parsing logic to allow it to be nicely reused by BPF
static linker. Further, at least for BPF static linker, it's important to know
which attributes of a BPF map were defined explicitly, so provide a bit set
for each known portion of BTF map definition. This allows BPF static linker to
do a simple check when dealing with extern map declarations.
The same capabilities allow to distinguish attributes explicitly set to zero
(e.g., __uint(max_entries, 0)) vs the case of not specifying it at all (no
max_entries attribute at all). Libbpf is currently not utilizing that, but it
could be useful for backwards compatibility reasons later.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-7-andrii@kernel.org
|
|
Currently libbpf is very strict about parsing BPF program instruction
sections. No gaps are allowed between sequential BPF programs within a given
ELF section. Libbpf enforced that by keeping track of the next section offset
that should start a new BPF (sub)program and cross-checks that by searching
for a corresponding STT_FUNC ELF symbol.
But this is too restrictive once we allow to have weak BPF programs and link
together two or more BPF object files. In such case, some weak BPF programs
might be "overridden" by either non-weak BPF program with the same name and
signature, or even by another weak BPF program that just happened to be linked
first. That, in turn, leaves BPF instructions of the "lost" BPF (sub)program
intact, but there is no corresponding ELF symbol, because no one is going to
be referencing it.
Libbpf already correctly handles such cases in the sense that it won't append
such dead code to actual BPF programs loaded into kernel. So the only change
that needs to be done is to relax the logic of parsing BPF instruction
sections. Instead of assuming next BPF (sub)program section offset, iterate
available STT_FUNC ELF symbols to discover all available BPF subprograms and
programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-6-andrii@kernel.org
|
|
Define __hidden helper macro in bpf_helpers.h, which is a short-hand for
__attribute__((visibility("hidden"))). Add libbpf support to mark BPF
subprograms marked with __hidden as static in BTF information to enforce BPF
verifier's static function validation algorithm, which takes more information
(caller's context) into account during a subprogram validation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-5-andrii@kernel.org
|
|
When used on externs SEC() macro will trigger compilation warning about
inapplicable `__attribute__((used))`. That's expected for extern declarations,
so suppress it with the corresponding _Pragma.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-4-andrii@kernel.org
|
|
Similarly to BPF_SEQ_PRINTF, this macro turns variadic arguments into an
array of u64, making it more natural to call the bpf_snprintf helper.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-6-revest@chromium.org
|
|
When initializing the __param array with a one liner, if all args are
const, the initial array value will be placed in the rodata section but
because libbpf does not support relocation in the rodata section, any
pointer in this array will stay NULL.
Fixes: c09add2fbc5a ("tools/libbpf: Add bpf_iter support")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210419155243.1632274-5-revest@chromium.org
|
|
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
relo->processed is set, but not used. Remove it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210415141817.53136-1-alexei.starovoitov@gmail.com
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
|
|
Wait until after the UMEM is checked for null to dereference it.
Fixes: 43f1bc1efff1 ("libbpf: Restore umem state after socket create failure")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210408052009.7844-1-ciara.loftus@intel.com
|
|
Add missing ')' for KERNEL_VERSION macro.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210405040119.802188-1-hengqi.chen@gmail.com
|
|
Remove redundant semi-colon in finalize_btf_ext().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210402012634.1965453-1-yangyingliang@huawei.com
|
|
Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.
Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-4-ciara.loftus@intel.com
|
|
If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-3-ciara.loftus@intel.com
|
|
Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210331061218.1647-2-ciara.loftus@intel.com
|
|
Currently, if there are multiple xdpsock instances running on a single
interface and in case one of the instances is terminated, the rest of
them are left in an inoperable state due to the fact of unloaded XDP
prog from interface.
Consider the scenario below:
// load xdp prog and xskmap and add entry to xskmap at idx 10
$ sudo ./xdpsock -i ens801f0 -t -q 10
// add entry to xskmap at idx 11
$ sudo ./xdpsock -i ens801f0 -t -q 11
terminate one of the processes and another one is unable to work due to
the fact that the XDP prog was unloaded from interface.
To address that, step away from setting bpf prog in favour of bpf_link.
This means that refcounting of BPF resources will be done automatically
by bpf_link itself.
Provide backward compatibility by checking if underlying system is
bpf_link capable. Do this by looking up/creating bpf_link on loopback
device. If it failed in any way, stick with netlink-based XDP prog.
therwise, use bpf_link-based logic.
When setting up BPF resources during xsk socket creation, check whether
bpf_link for a given ifindex already exists via set of calls to
bpf_link_get_next_id -> bpf_link_get_fd_by_id -> bpf_obj_get_info_by_fd
and comparing the ifindexes from bpf_link and xsk socket.
For case where resources exist but they are not AF_XDP related, bail out
and ask user to remove existing prog and then retry.
Lastly, do a bit of refactoring within __xsk_setup_xdp_prog and pull out
existing code branches based on prog_id value onto separate functions
that are responsible for resource initialization if prog_id was 0 and
for lookup existing resources for non-zero prog_id as that implies that
XDP program is present on the underlying net device. This in turn makes
it easier to follow, especially the teardown part of both branches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-7-maciej.fijalkowski@intel.com
|
|
Free temporary allocated memory used to construct finalized .BTF.ext data.
Found by Coverity static analysis on libbpf's Github repo.
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210327042502.969745-1-andrii@kernel.org
|
|
This patch is to make libbpf able to handle the following extern
kernel function declaration and do the needed relocations before
loading the bpf program to the kernel.
extern int foo(struct sock *) __attribute__((section(".ksyms")))
In the collect extern phase, needed changes is made to
bpf_object__collect_externs() and find_extern_btf_id() to collect
extern function in ".ksyms" section. The func in the BTF datasec also
needs to be replaced by an int var. The idea is similar to the existing
handling in extern var. In case the BTF may not have a var, a dummy ksym
var is added at the beginning of bpf_object__collect_externs()
if there is func under ksyms datasec. It will also change the
func linkage from extern to global which the kernel can support.
It also assigns a param name if it does not have one.
In the collect relo phase, it will record the kernel function
call as RELO_EXTERN_FUNC.
bpf_object__resolve_ksym_func_btf_id() is added to find the func
btf_id of the running kernel.
During actual relocation, it will patch the BPF_CALL instruction with
src_reg = BPF_PSEUDO_FUNC_CALL and insn->imm set to the running
kernel func's btf_id.
The required LLVM patch: https://reviews.llvm.org/D93563
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015234.1548923-1-kafai@fb.com
|
|
This patch records the extern sym relocs first before recording
subprog relocs. The later patch will have relocs for extern
kernel function call which is also using BPF_JMP | BPF_CALL.
It will be easier to handle the extern symbols first in
the later patch.
is_call_insn() helper is added. The existing is_ldimm64() helper
is renamed to is_ldimm64_insn() for consistency.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015227.1548623-1-kafai@fb.com
|
|
This patch renames RELO_EXTERN to RELO_EXTERN_VAR.
It is to avoid the confusion with a later patch adding
RELO_EXTERN_FUNC.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015221.1547722-1-kafai@fb.com
|
|
This patch refactors code, that finds kernel btf_id by kind
and symbol name, to a new function find_ksym_btf_id().
It also adds a new helper __btf_kind_str() to return
a string by the numeric kind value.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015214.1547069-1-kafai@fb.com
|
|
This patch refactors most of the logic from
bpf_object__resolve_ksyms_btf_id() into a new function
bpf_object__resolve_ksym_var_btf_id().
It is to get ready for a later patch adding
bpf_object__resolve_ksym_func_btf_id() which resolves
a kernel function to the running kernel btf_id.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015207.1546749-1-kafai@fb.com
|
|
Ensure that BPF static linker preserves all DATASEC BTF types, even if some of
them might not have any variable information at all. This may happen if the
compiler promotes local initialized variable contents into .rodata section and
there are no global or static functions in the program.
For example,
$ cat t.c
struct t { char a; char b; char c; };
void bar(struct t*);
void find() {
struct t tmp = {1, 2, 3};
bar(&tmp);
}
$ clang -target bpf -O2 -g -S t.c
.long 104 # BTF_KIND_DATASEC(id = 8)
.long 251658240 # 0xf000000
.long 0
.ascii ".rodata" # string offset=104
$ clang -target bpf -O2 -g -c t.c
$ readelf -S t.o | grep data
[ 4] .rodata PROGBITS 0000000000000000 00000090
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210326043036.3081011-1-andrii@kernel.org
|
|
The current code bails out with negative and positive returns.
If the callback returns a positive return code, 'ring_buffer__consume()'
and 'ring_buffer__poll()' will return a spurious number of records
consumed, but mostly important will continue the processing loop.
This patch makes positive returns from the callback a no-op.
Fixes: bf99c936f947 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325150115.138750-1-pctammela@mojatatu.com
|
|
Unfortunately some distros don't have their kernel version defined
accurately in <linux/version.h> due to different long term support
reasons.
It is important to have a way to override the bpf kern_version
attribute during runtime: some old kernels might still check for
kern_version attribute during bpf_prog_load().
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@ubuntu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210323040952.2118241-1-rafaeldtinoco@ubuntu.com
|
|
bpf_program__get_type() and bpf_program__get_expected_attach_type() shouldn't
modify given bpf_program, so mark input parameter as const struct bpf_program.
This eliminates unnecessary compilation warnings or explicit casts in user
programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210324172941.2609884-1-andrii@kernel.org
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-24
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).
The main changes are:
1) Static linking of multiple BPF ELF files, from Andrii.
2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.
3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Skip BTF fixup step when input object file is missing BTF altogether.
Fixes: 8fd27bf69b86 ("libbpf: Add BPF static linker BTF and BTF.ext support")
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210319205909.1748642-3-andrii@kernel.org
|
|
The vmlinux.h generated from BTF is invalid when building
drivers/phy/ti/phy-gmii-sel.c with clang:
vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’
61702 | const struct reg_field (*regfields)[3];
| ^~~~~~~~~
bpftool generates a forward declaration for this struct regfield, which
compilers aren't happy about. Here's a simplified reproducer:
struct inner {
int val;
};
struct outer {
struct inner (*ptr_to_array)[2];
} A;
After build with clang -> bpftool btf dump c -> clang/gcc:
./def-clang.h:11:23: error: array has incomplete element type 'struct inner'
struct inner (*ptr_to_array)[2];
Member ptr_to_array of struct outer is a pointer to an array of struct
inner. In the DWARF generated by clang, struct outer appears before
struct inner, so when converting BTF of struct outer into C, bpftool
issues a forward declaration to struct inner. With GCC the DWARF info is
reversed so struct inner gets fully defined.
That forward declaration is not sufficient when compilers handle an
array of the struct, even when it's only used through a pointer. Note
that we can trigger the same issue with an intermediate typedef:
struct inner {
int val;
};
typedef struct inner inner2_t[2];
struct outer {
inner2_t *ptr_to_array;
} A;
Becomes:
struct inner;
typedef struct inner inner2_t[2];
And causes:
./def-clang.h:10:30: error: array has incomplete element type 'struct inner'
typedef struct inner inner2_t[2];
To fix this, clear through_ptr whenever we encounter an intermediate
array, to make the inner struct part of a strong link and force full
declaration.
Fixes: 351131b51c7a ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org
|
|
Similar to
https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org/
When DECLARE_LIBBPF_OPTS is used with inline field initialization, e.g:
DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts,
.field_name = var_ident,
.indent_level = 2,
.strip_mods = strip_mods,
);
and compiled in debug mode, the compiler generates code which
leaves the padding uninitialized and triggers errors within libbpf APIs
which require strict zero initialization of OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes: 9f81654eebe8 ("libbpf: Expose BTF-to-C type declaration emitting API")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319192117.2310658-1-kpsingh@kernel.org
|
|
Add .BTF and .BTF.ext static linking logic.
When multiple BPF object files are linked together, their respective .BTF and
.BTF.ext sections are merged together. BTF types are not just concatenated,
but also deduplicated. .BTF.ext data is grouped by type (func info, line info,
core_relos) and target section names, and then all the records are
concatenated together, preserving their relative order. All the BTF type ID
references and string offsets are updated as necessary, to take into account
possibly deduplicated strings and types.
BTF DATASEC types are handled specially. Their respective var_secinfos are
accumulated separately in special per-section data and then final DATASEC
types are emitted at the very end during bpf_linker__finalize() operation,
just before emitting final ELF output file.
BTF data can also provide "section annotations" for some extern variables.
Such concept is missing in ELF, but BTF will have DATASEC types for such
special extern datasections (e.g., .kconfig, .ksyms). Such sections are called
"ephemeral" internally. Internally linker will keep metadata for each such
section, collecting variables information, but those sections won't be emitted
into the final ELF file.
Also, given LLVM/Clang during compilation emits BTF DATASECS that are
incomplete, missing section size and variable offsets for static variables,
BPF static linker will initially fix up such DATASECs, using ELF symbols data.
The final DATASECs will preserve section sizes and all variable offsets. This
is handled correctly by libbpf already, so won't cause any new issues. On the
other hand, it's actually a nice property to have a complete BTF data without
runtime adjustments done during bpf_object__open() by libbpf. In that sense,
BPF static linker is also a BTF normalizer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-8-andrii@kernel.org
|
|
Introduce BPF static linker APIs to libbpf. BPF static linker allows to
perform static linking of multiple BPF object files into a single combined
resulting object file, preserving all the BPF programs, maps, global
variables, etc.
Data sections (.bss, .data, .rodata, .maps, maps, etc) with the same name are
concatenated together. Similarly, code sections are also concatenated. All the
symbols and ELF relocations are also concatenated in their respective ELF
sections and are adjusted accordingly to the new object file layout.
Static variables and functions are handled correctly as well, adjusting BPF
instructions offsets to reflect new variable/function offset within the
combined ELF section. Such relocations are referencing STT_SECTION symbols and
that stays intact.
Data sections in different files can have different alignment requirements, so
that is taken care of as well, adjusting sizes and offsets as necessary to
satisfy both old and new alignment requirements.
DWARF data sections are stripped out, currently. As well as LLLVM_ADDRSIG
section, which is ignored by libbpf in bpf_object__open() anyways. So, in
a way, BPF static linker is an analogue to `llvm-strip -g`, which is a pretty
nice property, especially if resulting .o file is then used to generate BPF
skeleton.
Original string sections are ignored and instead we construct our own set of
unique strings using libbpf-internal `struct strset` API.
To reduce the size of the patch, all the .BTF and .BTF.ext processing was
moved into a separate patch.
The high-level API consists of just 4 functions:
- bpf_linker__new() creates an instance of BPF static linker. It accepts
output filename and (currently empty) options struct;
- bpf_linker__add_file() takes input filename and appends it to the already
processed ELF data; it can be called multiple times, one for each BPF
ELF object file that needs to be linked in;
- bpf_linker__finalize() needs to be called to dump final ELF contents into
the output file, specified when bpf_linker was created; after
bpf_linker__finalize() is called, no more bpf_linker__add_file() and
bpf_linker__finalize() calls are allowed, they will return error;
- regardless of whether bpf_linker__finalize() was called or not,
bpf_linker__free() will free up all the used resources.
Currently, BPF static linker doesn't resolve cross-object file references
(extern variables and/or functions). This will be added in the follow up patch
set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-7-andrii@kernel.org
|
|
Add btf__add_type() API that performs shallow copy of a given BTF type from
the source BTF into the destination BTF. All the information and type IDs are
preserved, but all the strings encountered are added into the destination BTF
and corresponding offsets are rewritten. BTF type IDs are assumed to be
correct or such that will be (somehow) modified afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-6-andrii@kernel.org
|
|
Extract BTF logic for maintaining a set of strings data structure, used for
BTF strings section construction in writable mode, into separate re-usable
API. This data structure is going to be used by bpf_linker to maintains ELF
STRTAB section, which has the same layout as BTF strings section.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-5-andrii@kernel.org
|
|
Rename btf_add_mem() and btf_ensure_mem() helpers that abstract away details
of dynamically resizable memory to use libbpf_ prefix, as they are not
BTF-specific. No functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-4-andrii@kernel.org
|
|
Extract and generalize the logic to iterate BTF type ID and string offset
fields within BTF types and .BTF.ext data. Expose this internally in libbpf
for re-use by bpf_linker.
Additionally, complete strings deduplication handling for BTF.ext (e.g., CO-RE
access strings), which was previously missing. There previously was no
case of deduplicating .BTF.ext data, but bpf_linker is going to use it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-3-andrii@kernel.org
|
|
btf_type_by_id() is internal-only convenience API returning non-const pointer
to struct btf_type. Expose it outside of btf.c for re-use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-2-andrii@kernel.org
|
|
Given that vmlinux.h is not compatible with headers like stddef.h, NULL poses
an annoying problem: it is defined as #define, so is not captured in BTF, so
is not emitted into vmlinux.h. This leads to users either sticking to explicit
0, or defining their own NULL (as progs/skb_pkt_end.c does).
But it's easy for bpf_helpers.h to provide (conditionally) NULL definition.
Similarly, KERNEL_VERSION is another commonly missed macro that came up
multiple times. So this patch adds both of them, along with offsetof(), that
also is typically defined in stddef.h, just like NULL.
This might cause compilation warning for existing BPF applications defining
their own NULL and/or KERNEL_VERSION already:
progs/skb_pkt_end.c:7:9: warning: 'NULL' macro redefined [-Wmacro-redefined]
#define NULL 0
^
/tmp/linux/tools/testing/selftests/bpf/tools/include/vmlinux.h:4:9: note: previous definition is here
#define NULL ((void *)0)
^
It is trivial to fix, though, so long-term benefits outweight temporary
inconveniences.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20210317200510.1354627-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Otherwise, there exists a small window between the opening and closing
of the socket fd where it may leak into processes launched by some other
thread.
Fixes: 949abbe88436 ("libbpf: add function to setup XDP")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210317115857.6536-1-memxor@gmail.com
|
