summaryrefslogtreecommitdiff
path: root/sound/soc/intel/boards
AgeCommit message (Collapse)Author
2020-07-20ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loadedKai Vehmanen
The mc_private->hdmi_pcm_list is populated by elements loaded during DSP topology load. Valid topologies for this machine driver will always have PCM nodes for HDMI, but driver should fail gracefully even in the case this is not true. Add a sanity check to sof_sdw_hdmi_card_late_probe() for this case. Without the fix, a null pcm handle gets dereferenced. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20ASoC: Intel: sof_sdw: add support for systems without i915 audioKai Vehmanen
Extend the generic SOF Soundwire machine driver to support systems where iDisp HDMI/DP audio codec is disabled for some reason (i915 driver disabled, HDMI/DP implemented with a discrete GPU, etc). Switch codecs to SoC dummy in the affected DAI links. This allows to reuse existing topologies for this case. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20ASoC: Intel: sof_sdw_rt711: remove properties in card removePierre-Louis Bossart
The rt711 jack detection properties are set from the machine drivers during the card probe, as done in other ASoC examples. KASAN reports a use-after-free error when unbinding drivers due to a confusing sequence between the ACPI core, the device core and the SoundWire device cleanups. Rather than fixing this sequence, follow the recommendation to have the same caller add and remove properties, add an explicit device_remove_properties() in the card .remove() callback. In future patches the use of device_add/remove_properties will be replaced by a direct handling of a swnode, but the sequence will remain the same. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20ASoC: Intel: sof_sdw_rt711: remove hard-coded codec nameBard Liao
We can get codec name from dai link. Suggested-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200717211337.31956-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-20Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis ↵Mark Brown
Bossart <pierre-louis.bossart@linux.intel.com>: Small patchset to harden the SoundWire machine driver, change bad HIDs, update PLL settings and avoid memory leaks. Given that the SoundWire core parts are not upstream it's probably not necessary to provide the patches to stable branches. Bard Liao (1): ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name Kai Vehmanen (2): ASoC: Intel: sof_sdw: add support for systems without i915 audio ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded Libin Yang (1): ASoC: Intel: common: change match table ehl-rt5660 Pierre-Louis Bossart (1): ASoC: Intel: sof_sdw_rt711: remove properties in card remove Yong Zhi (1): ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq sound/soc/intel/boards/sof_rt5682.c | 9 +++++- sound/soc/intel/boards/sof_sdw.c | 31 +++++++++++++------ sound/soc/intel/boards/sof_sdw_common.h | 2 ++ sound/soc/intel/boards/sof_sdw_hdmi.c | 6 ++++ sound/soc/intel/boards/sof_sdw_rt711.c | 17 +++++++++- .../intel/common/soc-acpi-intel-ehl-match.c | 2 +- 6 files changed, 54 insertions(+), 13 deletions(-) base-commit: 22e9b54307987787efa0ee534aa9e31982ec1161 -- 2.25.1
2020-07-16ASoC: Intel: bytcht_es8316: Add missed put_device()Jing Xiangfeng
snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error path. Add the missed function call to fix it. Fixes: ba49cf6f8e4a ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200714080918.148196-1-jingxiangfeng@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-10ASoC: Intel: cht_bsw_rt5672: Improve dai-set-fmt comment in cht_codec_fixup()Hans de Goede
As Pierre-Louis Bossart pointed out, saying that the default mode for the SSP is TDM 4 slot is not entirely accurate. There really are 2 default modes: The default mode for the SSP configuration is TDM 4 slot for the cpu-dai (hard-coded in DSP firmware), The default mode for the SSP configuration is I2S for the codec-dai (hard-coded in the 'SSP2-Codec" .dai_fmt masks, so far unused). This commit updates the comment in cht_codec_fixup() to properly reflect this. Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200703103840.333732-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: Intel: sdw_max98373: add card_late_probe supportranderwang
Disable Left and Right Spk pin after boot so that sof can get suspended. This follows the same logic added to another machine driver with commit 94d2d0897474 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger function") Signed-off-by: randerwang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200708203215.231776-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: Intel: sof-sdw: add MAX98373 I2C dependenciesPierre-Louis Bossart
Reflect Kconfig changes and add both SoundWire and I2C modes Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200708203215.231776-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: codecs: max98373: split I2C and common partsPierre-Louis Bossart
To prepare support for SoundWire, let's first split the I2C and common parts. No new functionality, just indents and formatting to make checkpatch happy. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200708203215.231776-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-08ASoC: Intel: bdw-rt5677: fix non BE conversionPierre-Louis Bossart
When SOF is used, the normal links are converted into DPCM ones. This generates an error [ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd Wake on Voice does not support playback [ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on Voice :-22 Fix by forcing the capture direction. Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02ASoC: Intel: bxt-da7219-max98357a: return -EINVAL on unrecognized speaker ↵Colin Ian King
amplifier Currently if the ctx->spkamp is not recognized an error message is reported but the code continues to set up the device with uninitialized variables such as the number of widgets. Fix this by returning -EINVAL for unrecognized speaker amplifier types. Fixes: e1435a1feb18 ("ASoC: Intel: bxt-da7219-max98357a: support MAX98390 speaker amp") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Addresses-Coverity: ("Uninitialized scalar variable") Link: https://lore.kernel.org/r/20200702114835.37889-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-01ASoC: Intel: bxt-da7219-max98357a: support MAX98390 speaker ampBrent Lu
Support MAX98390 speaker amplifier on cometlake platform. Driver now detects amplifier type in the probe function and installs corresponding controls and DAPM widgets/routes in the late_probe function. Signed-off-by: Brent Lu <brent.lu@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/1593596211-28344-1-git-send-email-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-29Merge branch 'for-5.8' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.9
2020-06-29ASoC: Intel: cht_bsw_rt5672: Change bus format to I2S 2 channelHans de Goede
The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards. One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S. Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound. Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere. This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel. This change has been tested on the following devices with a rt5672 codec: Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: sof_sdw: Add MAX98373 supportNaveen Manohar
Add max98373-sdw helper function, which configures 2x MAX98373 codecs to Link1. This patch shares code between the I2S and SoundWire modes of MAX98373 and adds the trigger already added for I2S. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200625192620.4312-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoc: Intel: cml_rt1011_rt5682: explicitly access first codecFred Oh
dailink.codecs is pointer to a codec array. Explicitly access first codec's dai_name. Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200625192458.4148-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: Boards: tgl_max98373: Update TDM configuration in hw_paramsDharageswari R
This patch updates tx_mask, so that (0-3)slots are reserved for Maxim amps to feedback data. V0->slot0, I0->slot1, V1->slot2, I1->slot3. also update slot_width in tdm configuration to 24 as the BE configuration is 24 in topology. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: intel: cml_rt1011_rt5682: use for_each_card_prelinksBard Liao
for_each_card_prelinks() is a common API to walk through each prelink in the card. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: Boards: cml_rt1011_rt5682: use statically define codec configFred Oh
When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by a quirk with a devm allocated structure and the probe is deferred, in the next probe we will see an use-after-free condition (verified with KASAN). This can be avoided by using statically allocated configurations - which simplifies the code quite a bit as well. KASAN issue fixed. [ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f [ 23.301875] ================================================================== [ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105 [ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3 [ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020 [ 23.302329] Workqueue: events deferred_probe_work_func [ 23.302331] Call Trace: [ 23.302339] dump_stack+0x76/0xa0 [ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e [ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0 [ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0 [ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302365] __kasan_report.cold+0x37/0x86 [ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302375] kasan_report+0x38/0x50 [ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682] [ 23.302389] platform_drv_probe+0x66/0xc0 Fixes: 629ba12e9998 ("ASoC: Intel: boards: split woofer and tweeter support") Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: Boards: cml_rt1011_rt5682: reduce log level for printing quirkFred Oh
Change dev_info to dev_dbg to reduce noise during multiple deferred probes. Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: intel: sof_rt5682: Add support for jsl-max98360a-rt5682Yong Zhi
Add support for max98360a speaker amp on SSP1 and ALC5682 on SSP0 for jsl+ platform. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: Boards: tgl_max98373: Fix the comment for max_98373_componentsDharageswari R
MAX_98373_DEV0_NAME is the Right speaker and MAX_98373_DEV1_NAME is the Left speaker, hence updating the comments for max98373 dailink components accordingly. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: Boards: tgl_max98373: add dai_trigger functionDharageswari R
Speaker amplifier feedback is not modeled as being dependent on any active output. Even when there is no playback happening, parts of the graph, specifically the IV sense->speaker protection->output remains active and this prevents the DSP from entering low-power states. This patch suggests a machine driver level approach where the speaker pins are enabled/disabled dynamically depending on stream start/stop events. DPAM graph representations show the feedback loop is indeed disabled and low-power states can be reached. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: boards: byt*.c: remove cast in dev_info quirk logPierre-Louis Bossart
We don't need an explicit cast, using the right format is simple enough. Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: sof_sdw: add quirk override with kernel parameterPierre-Louis Bossart
During the bring-up of new platforms, or to take care of specific hardware reworks, it's useful to add a kernel parameter to override the default DMI-based quirks. For example, adding the following line in a .conf file in /etc/modprobe.d/ will change the default quirk and log the changes if dynamic debug is enabled. options snd_soc_sof_sdw quirk=0x802 [ 735.025785] sof_sdw sof_sdw: Overriding quirk 0x10 => 0x802 [ 735.025787] sof_sdw sof_sdw: quirk realtek,jack-detect-source 2 [ 735.025790] sof_sdw sof_sdw: quirk SOF_RT715_DAI_ID_FIX enabled Tested on ICL RVP with add-on board instead of default codec. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: bxt_rt298: add missing .owner fieldPierre-Louis Bossart
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 76016322ec56 ('ASoC: Intel: Add Broxton-P machine driver') Reported-by: Jaroslav Kysela <perex@perex.cz> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: sof_sdw: add missing .owner fieldPierre-Louis Bossart
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 52db12d193d4 ('ASoC: Intel: boards: add sof_sdw machine driver') Reported-by: Jaroslav Kysela <perex@perex.cz> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-26ASoC: Intel: cml_rt1011_rt5682: add missing .owner fieldPierre-Louis Bossart
This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 17fe95d6df93 ('ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682') Reported-by: Jaroslav Kysela <perex@perex.cz> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23ASoC: intel: cml_rt1011_rt5682: disable jack in dailink .exit()Fred Oh
When removing the machine driver, the rt5682 jack handler will oops if jack detection is not disabled. The jack can be disabled in the dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200622154241.29053-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23ASoC: intel: sof_rt5682: move disabling jack to dai link's exit()Fred Oh
Move disabling jack from platform driver's remove() to dai link's exit(). This is symmetrical change as jack is enabled in init(). Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200622154241.29053-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23ASoC: Intel: kbl-rt5660: use .exit() dailink callback to release gpiodPierre-Louis Bossart
The gpiod handling is inspired from the bdw-rt5677 code. Apply same fix to avoid reference count issue while removing modules for consistency. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200622154241.29053-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-23ASoC: Intel: bdw-rt5677: fix module load/unload issuesPierre-Louis Bossart
The mainline code currently prevents modules from being removed. The BE dailink .init() function calls devm_gpiod_get() using the codec component device as argument. When the machine driver is removed, the references to the gpiod are not released, and it's not possible to remove the codec driver module - which is the only entity which could free the gpiod. This conceptual deadlock can be avoided by invoking gpiod_get() in the .init() callback, and calling gpiod_put() in the exit() callback. Tested on SAMUS Chromebook with SOF driver. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Curtis Malainey <curtis@malainey.com> Link: https://lore.kernel.org/r/20200622154241.29053-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: Intel: broadwell: simplify card names for SOF usesPierre-Louis Bossart
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bdw <codec_name>" pattern for all Broadwell machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200617165616.18511-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: Intel: cht*: simplify card names for SOF usesPierre-Louis Bossart
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bytcht <codec_name>" pattern for all cht* machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617165616.18511-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: Intel: byt*: simplify card names for SOF usesPierre-Louis Bossart
Blindly adding an sof- prefix to the card name is not user friendly and causes UCM issues with a driver name truncated to 16 characters. Simplify to use "sof-bytcht <codec_name>" pattern for all byt* machine drivers. The sof- prefix is added by the core. A generic "SOF" driver name is used, and UCMv2 will detect the configuration for this driver by testing the card name. Legacy uses are unmodified. Suggested-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200617165616.18511-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-17ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_HPierre-Louis Bossart
We already have two configurations for CometLake, and a third one coming. On other platforms, we used a single Kconfig option, so we should follow the same trend by merging the two cases in a backwards compatible way. The backwards compatibility is handled by overloading the COMETLAKE_LP kconfig as COMETLAKE. In practice we've never seen a case where COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one of the two is enough. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200617164755.18104-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-09Merge series "ASoC: Fix dailink checks for DPCM" from Pierre-Louis Bossart ↵Mark Brown
<pierre-louis.bossart@linux.intel.com>: We've had a couple of changes that introduce regressions with the multi-cpu DAI solutions, and while trying to fix them we found additional inconsistencies that should also go to stable branches. Bard Liao (1): ASoC: core: only convert non DPCM link to DPCM link Pierre-Louis Bossart (3): ASoC: soc-pcm: dpcm: fix playback/capture checks ASoC: Intel: boards: replace capture_only by dpcm_capture ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98927.c | 4 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +- sound/soc/soc-core.c | 22 ++++++++-- sound/soc/soc-pcm.c | 44 ++++++++++++++----- sound/soc/sof/nocodec.c | 6 ++- 7 files changed, 62 insertions(+), 20 deletions(-) base-commit: 8a9144c1cf523221b37dd3393827253c91fcbf54 -- 2.20.1
2020-06-09ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tabletHans de Goede
The Toshiba Encore WT10-A tablet almost fully works with the default settings for Bay Trail CR devices. The only issue is that it uses a digital mic. connected the the DMIC1 input instead of an analog mic. Add a quirk for this model using the default settings with the input-map replaced with BYT_RT5640_DMIC1_MAP. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200608204634.93407-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-09ASoC: Intel: boards: replace capture_only by dpcm_capturePierre-Louis Bossart
It's not clear why specific FE dailinks use capture_only flags, likely blind copy/paste from Chromebook driver to the other. Replace by dpcm_capture, this will make future alignment and removal of flags easier. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200608194415.4663-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI conditionLibin Yang
As CONFIG_SND_HDA_CODEC_HDMI is always enabled in sof_pcm512x, let's remove the test of CONFIG_SND_HDA_CODEC_HDMI in the sof_pcm512x driver. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200529193547.6077-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC conditionLibin Yang
As CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC is always enabled in sof-soundwire driver, let's remove the test of CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC in the code. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200529193547.6077-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common hdmiLibin Yang
If the driver uses common hdmi, SND_SOC_SOF_HDA_AUDIO_CODEC is required to be enabled. Otherwise, the legacy hda codec driver will not be used. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200529193547.6077-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-28ASoC: rt5682: split i2c driver into separate moduleArnd Bergmann
With SND_SOC_AMD_RV_RT5682_MACH using the i2c version of the driver, we can easily get a build failure when I2C is built-in but soundwire is not: WARNING: unmet direct dependencies detected for SND_SOC_RT5682 Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (I2C [=y] || SOUNDWIRE [=m]) && (SOUNDWIRE [=m] || !SOUNDWIRE [=m]) && (I2C [=y] || !I2C [=y]) Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] Selected by [m]: - SND_SOC_RT5682_SDW [=m] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SOUNDWIRE [=m] && (I2C [=y] || !I2C [=y]) Rework the driver to have three separate modules, with the main driver just dealing with the common bits and the actual initialization as part of i2c and sdw specific modules. The conversion is fairly mechanical to keep it easy to review, i.e. it moves code around with the minimal required renaming and changes. Fixes: 6b8e4e7db3cd ("ASoC: amd: Add machine driver for Raven based platform") Fixes: fd443a20c2f0 ("ASoC: rt5682: fix I2C/Soundwire dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200528091851.2889754-1-arnd@arndb.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-27ASoC: Intel: byt/cht: add .pm_opsPierre-Louis Bossart
Add required .pm_ops to support suspend/resume on baytrail/cherrytrail machines. This .pm_ops is conditionally-added to avoid impacting the legacy driver where power management is handled differently. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200526203640.25980-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-27ASoC: Intel: bytcr_rt5640/51: remove .ignore_suspendPierre-Louis Bossart
Low-power playback was never enabled on Baytrail devices, remove what looks like copy/paste from other machine drivers which were never submitted upstream. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200526203640.25980-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-18ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tabletHans de Goede
The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low). Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-18ASoC: Intel: cht_bsw_nau8824: remap BTN_0 as KEY_PLAYPAUSEPierre-Louis Bossart
Use same mapping as in all other machine drivers: BTN_0 : KEY_PLAYPAUSE BTN_1 : KEY_VOICECOMMAND BTN_2 : KEY_VOLUMEUP BTN_3 : KEY_VOLUMEDOWN Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20200515210731.10942-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-18ASoC: Intel: sof_sdw_rt700: remap buttonsPierre-Louis Bossart
Use same mapping as in all other machine drivers: BTN_0 : KEY_PLAYPAUSE BTN_1 : KEY_VOICECOMMAND BTN_2 : KEY_VOLUMEUP BTN_3 : KEY_VOLUMEDOWN Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20200515210731.10942-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-18ASoC: Intel: sof_sdw_rt711: remap buttonsPierre-Louis Bossart
Use same mapping as in all other machine drivers: BTN_0 : KEY_PLAYPAUSE BTN_1 : KEY_VOICECOMMAND BTN_2 : KEY_VOLUMEUP BTN_3 : KEY_VOLUMEDOWN Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Link: https://lore.kernel.org/r/20200515210731.10942-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>