summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2015-10-22ASoC: tas2552: fix dBscale-min declarationAndreas Dannenberg
commit e2600460bc3aa14ca1df86318a327cbbabedf9a8 upstream. The minimum volume level for the TAS2552 (control register value 0x00) is -7dB however the driver declares it as -0.07dB. Running amixer before the patch reports: dBscale-min=-0.07dB,step=1.00dB,mute=0 Running amixer with the patch applied reports: dBscale-min=-7.00dB,step=1.00dB,mute=0 Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probeGianluca Renzi
commit e256da84a04ea31c3c215997c847609af224e8f4 upstream. Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ASoC: arizona: Poll for FLL clock OK rather than use interruptsCharles Keepax
commit 0e7659712836ca59b4735bc5cc94de38698a5e01 upstream. The extcon driver takes the DAPM mutex from within the interrupt thread in several places, which makes it possible to get into a situation where the interrupt thread is blocked waiting on the DAPM mutex whilst a DAPM sequence is running which is attempting to configure the FLL. In this case the FLL completion can't be completed as as the IRQ handler is ONE_SHOT, which cause the FLL lock to use the full time out (250mS) and report that the process timed out. It is not really practical to make the extcon driver not take the DAPM mutex from within the interrupt thread, at least not without extensive modification. So this patch fixes the issue by switching the wait for the FLL lock to polling. A few fast polls are done first as the FLL should lock quickly for a good quality reference clock, (indeed it hits on the first poll on my system) and it will poll every 20mS after that until it times out. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ASoC: arizona: Fix gain settings of FLL in free-run modeNikesh Oswal
commit 1cf5a330c05ae37a0a98ac7c9800a6f50d5579ec upstream. The wrong register was used to set the gain of ref loop, when changing the FLL output on an active FLL. This patch corrects the offset of the gain register. Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ASoC: adav80x: Remove .read_flag_mask setting from adav80x_regmap_configAxel Lin
commit 9d8352864907f0ad76124c5b28f65b5a382d7d7c upstream. Don't set .read_flag_mask for adav803, it's for adav801 only. Fixes: 0c2d69645628 ("ASoC: adav80x: Split SPI and I2C code into different modules") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ASoC: rt5645: Add struct dmi_system_id "Google Celes" for chrome platformOder Chiou
commit c1713485f9fc06e1f4de9800b43f6486f2527379 upstream. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-21ASoC: rt5640: fix line out no sound issueJohn Lin
commit 9b850ca4f1c5acd7fcbbd4b38a2d27132801a8d5 upstream. The power for line out was not turned on when line out is enabled. So we add "LOUT amp" widget to turn on the power for line out. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-06Merge remote-tracking branches 'asoc/fix/cs4265', 'asoc/fix/intel' and ↵Mark Brown
'asoc/fix/topology' into asoc-linus
2015-08-06Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown
2015-08-03ASoC: rt5645: Fix lost pin setting for DMIC1Bard Liao
I2S2_DAC pin can be used for I2S or GPIO. We should set it as GPIO if we use GPIO5 as DMIC1 data pin. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24ASoC: cs4265: Fix setting dai format for Left/Right JustifiedAxel Lin
The settings in current code does not match the datasheet, fix it. DAC Control - Address 03h DAC Digital Interface Format (Bits 5:4) DAC_DIF1 DAC_DIF0 Description 0 0 Left Justified, up to 24-bit data (default) 0 1 I²S, up to 24-bit data 1 0 Right-Justified, 16-bit Data 1 1 Right-Justified, 24-bit Data Transmitter Control 2 - Address 12h Transmitter Digital Interface Format (Bits 7:6) Tx_DIF1 Tx_DIF0 Description Format Figure 0 0 Left Justified, up to 24-bit data (default) 0 1 I²S, up to 24-bit data 1 0 Right-Justified, 16-bit Data 1 1 Right-Justified, 24-bit Data Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24Merge remote-tracking branches 'asoc/fix/sgtl5000', 'asoc/fix/topology' and ↵Mark Brown
'asoc/fix/zx' into asoc-linus
2015-07-24Merge remote-tracking branch 'asoc/fix/ssm4567' into asoc-linusMark Brown
2015-07-24Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown
2015-07-24ASoC: pcm1681: Fix setting de-emphasis sampling rate selectionAxel Lin
The de-emphasis sampling rate selection is controlled by BIT[3:4] of PCM1681_DEEMPH_CONTROL register. Do proper left shift to set it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-07-22ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmtBen Zhang
The regmap_write in ssm4567_set_dai_fmt accidentally clears the TDM_BCLKS field which was set earlier by ssm4567_set_tdm_slot. This patch fixes it by using regmap_update_bits with proper mask. Signed-off-by: Ben Zhang <benzh@chromium.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-07-22ASoC: sgtl5000: Fix up define for SGTL5000_SMALL_POPAxel Lin
Currently, below code actually does not update any bit because SGTL5000_SMALL_POP is 0. snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL, SGTL5000_SMALL_POP, 1); The SGTL5000_SMALL_POP should be BIT(0) rather than 0, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-By: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17ASoC: rt5645: Check if codec is initialized in workqueue handlerNicolas Boichat
This fixes kernel panic on boot, if rt5645->codec is NULL when rt5645_jack_detect_work is first called. rt5645_jack_detect_work needs rt5645->codec to be initialized to setup dapm pins. Also, reporting jack events is useless, as the jacks cannot be set before the codec is ready. Since we manually call the interrupt handler in rt5645_set_jack_detect, the initial jack state will be reported correctly, and dapm pins will be setup at that time. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-22Merge remote-tracking branch 'asoc/topic/arizona' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branch 'asoc/topic/wm8995' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branches 'asoc/topic/wm8523' and 'asoc/topic/wm8741' ↵Mark Brown
into asoc-next
2015-06-22Merge remote-tracking branch 'asoc/topic/tas2552' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', ↵Mark Brown
'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' ↵Mark Brown
and 'asoc/topic/omap' into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/intel' and 'asoc/topic/max98090' ↵Mark Brown
into asoc-next
2015-06-22Merge remote-tracking branches 'asoc/topic/adsp' and 'asoc/topic/atmel' into ↵Mark Brown
asoc-next
2015-06-22Merge remote-tracking branch 'asoc/topic/rt5670' into asoc-nextMark Brown
2015-06-22Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-nextMark Brown
2015-06-22Merge tag 'asoc-v4.2' into asoc-nextMark Brown
ASoC: Updates for v4.2 The big thing this release has been Liam's addition of topology support to the core. We've also seen quite a bit of driver work and the continuation of Lars' refactoring for component support. - Support for loading ASoC topology maps from firmware, intended to be used to allow self-describing DSP firmware images to be built which can map controls added by the DSP to userspace without the kernel needing to know about individual DSP firmwares. - Lots of refactoring to avoid direct access to snd_soc_codec where it's not needed supporting future refactoring. - Big refactoring and cleanup serieses for the Wolfson ADSP and TI TAS2552 drivers. - Support for TI TAS571x power amplifiers. - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs. - Support for x86 systems with RT5650 and Qualcomm Storm. # gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0 # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2015-06-22Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', ↵Mark Brown
'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus
2015-06-22Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', ↵Mark Brown
'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus
2015-06-22Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linusMark Brown
2015-06-19ASoC: wm_adsp: Move DSP Rate controls into the codecRichard Fitzgerald
The rate controls are codec-specific, it's not possible to generically say what the range or the meaning of each control is (or even if they exist at all) - that depends on the particular codec. This is currently being handled for Arizona codecs by putting an Arizona-specific table of controls inside the wm_adsp driver. This creates a dependency between wm_adsp and arizona.c, and is an awkward solution if the ADSP is used in another family of codecs Fix this by moving the Arizona-specific rate controls into the Arizona codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-19Merge branches 'topic/adsp' and 'topic/dapm' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2015-06-17ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 caseAxel Lin
Fix trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5645: move RT5650 muxes to rt5650_specific_dapm_widgetsMichele Curti
Developing a driver for an Asus X205TA laptop I get these dmesg errors: rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC1 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC2 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC3 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 R Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 R Mux has no paths so, move these muxes to the rt5650_specific_dapm_widgets[] list. Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5670: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5670_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: max98090: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: rt5640: Constify ACPI device ids and register defaultsMathias Krause
Constify the ACPI device ID array and the register map, no need to have them writable at runtime. Also drop the unneeded RT5640_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15ASoC: ml26124: Remove duplicate codeAxel Lin
Current code has duplicate code for 16000, 32000 and 48000 sample rates. get_srate() returns negative error code for unsupported rate, so we can remove the duplicate code in the swith cases by calling get_srate() first. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: wm8523: Set bclk ratio for master modeJulian Scheel
When running in master mode the bclk divider must be configured to generate a sane bitclock. Pick the smallest fs multiplicator, which can hold all transmitted bits. Signed-off-by: Julian Scheel <julian@jusst.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1]Zidan Wang
the enum of "DAC Polarity" should be wm8960_enum[1]. Signed-off-by: Zidan Wang <zidan.wang@freescale.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-12ASoC: rt5645: Use devm_gpiod_get_optional for hp-detectAxel Lin
Since hp-detect is optional, use devm_gpiod_get_optional instead. In additional, it should return error if devm_gpiod_get_optional fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: rt5645: Add the device tree parserOder Chiou
Modify the RT5645 driver to parse platform data from device tree. This is missing from previous patch in sound/soc/codecs/rt5645.c, that was present in v3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12ASoC: rt286: Add RL6347A class device shared support for RT286Oder Chiou
The patch separates the IO function from the rt286. It is prepared to share for new chips that support the same IO function. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: tas2552: Use devm_gpiod_get_optional for enable-gpioAxel Lin
commit ea178d1456dc ("ASoC: tas2552: Make the enable-gpio really optional") makes enable-gpio optional. devm_gpiod_get_optional() is the better function for optional gpio, so let's switch to use it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: Add basic debugfs entriesRichard Fitzgerald
This patch adds some debugfs nodes to get information about the currently running firmware. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: create ALSA controls from wm_adsp driverRichard Fitzgerald
Now that we have a codec_probe stage initialization in the wm_adsp driver, we can make the wm_adsp driver create its own ALSA controls instead of having that responsibility pushed to every codec driver. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-11ASoC: wm_adsp: Add codec_probe and codec_remove stubsRichard Fitzgerald
Currently the only init function in wm_adsp is called by the codec driver early in its probe before the codec has been registered with SOC. This patch adds stubs for the codec_probe and codec_remove stages and calls them from WM5102 and WM5110 codec drivers. This allows us to hang anything that needs setup during the codec probe stage off these functions without further modification of the codec drivers. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10ASoC: rt5645: change gpio to gpiod APIsOder Chiou
Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>