summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/rt5677.c
AgeCommit message (Collapse)Author
2023-07-09ASoC: rt5677: Sort headers alphabeticallyAndy Shevchenko
It's hard to see what's included and what's not on the glance. Sort headers alphabetically to improve maintenance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230630172155.83754-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-09ASoC: rt5677: Use device_get_match_data()Andy Shevchenko
Use device_get_match_data() to simplify the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230630172155.83754-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-09ASoC: rt5677: Use agnostic irq_domain_create_linear()Andy Shevchenko
Instead of irq_domain_add_linear() that requires of_node, use irq_domain_create_linear() that works outside of OF world. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230630172155.83754-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-09ASoC: rt5677: Refactor GPIO support codeAndy Shevchenko
After compiler complains: sound/soc/codecs/rt5677.c:4748:30: warning: dubious: x | !y I looked into the code and realized that we can refactor it for better reading and fixing above issue at the same time. Hence this change. It does not imply any functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230630172155.83754-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-16ASoC: rt5677: Add MODULE_FIRMWARE macroJuerg Haefliger
The module loads firmware so add a MODULE_FIRMWARE macro to provide that information via modinfo. Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Link: https://lore.kernel.org/r/20230616115549.1011903-1-juerg.haefliger@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-05-08ASoC: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
2023-04-08ELF: fix all "Elf" typosAlexey Dobriyan
ELF is acronym and therefore should be spelled in all caps. I left one exception at Documentation/arm/nwfpe/nwfpe.rst which looks like being written in the first person. Link: https://lkml.kernel.org/r/Y/3wGWQviIOkyLJW@p183 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-16i2c: Make remove callback return voidUwe Kleine-König
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-27ASoC: rt*: Remove now redundant non_legacy_dai_naming flagCharles Keepax
The ASoC core has now been changed to default to the non-legacy DAI naming, as such drivers using the new scheme no longer need to specify the non_legacy_dai_naming flag. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623125250.2355471-57-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-27ASoC: codecs: Fix spelling mistake "Unsupport" -> "Unsupported"Colin Ian King
There are spelling mistakes in dev_err error messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210924231003.144502-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5677: remove useless assignmentPierre-Louis Bossart
cppcheck warning: sound/soc/codecs/rt5677.c:5335:10: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] int ret = 0, loop, i, reg_irq, virq; ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302212527.55158-22-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-10ASoC: rt5677: clarify expressionPierre-Louis Bossart
cppcheck warning: sound/soc/codecs/rt5677.c:4571:61: style: Boolean result is used in bitwise operation. Clarify expression with parentheses. [clarifyCondition] (pll_code.m_bp ? 0 : pll_code.m_code) << RT5677_PLL_M_SFT | ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302212527.55158-21-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-09ASoC: codecs: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200709010359.GA18971@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: rt5677: rt5677_check_hotword() can be statickbuild test robot
Fixes: 21c00e5df439 ("ASoC: rt5677: Enable jack detect while DSP is running") Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20191114153304.n4pyix7qadu76tx4@4978f4969bb8 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Wait for DSP to boot before loading firmwareCurtis Malainey
Wait for hardware to startup. If we load before hardware is ready we could end up corrupting the firmware. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-12-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Set ADC clock to use PLL and enable ASRCCurtis Malainey
Use the PLL to kept the correct 24M clock rate so frequency shift does not occur when using the DSP VAD. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-11-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Allow VAD to be shut on/off at all timesCurtis Malainey
Due to limitations of the clocking configuration, we have no way of scheduling our hibernation before the bdw dsp hibernates. This causes issues when the system suspends with an open stream. We need userspace to toggle the kcontrol before we are suspended so that any writes on suspend are not lost and we don't corrupt the regmap. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-9-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Disable irq at suspendBen Zhang
The irq is disabled at suspend to avoid running the threaded irq handler after the codec has been powered off. At resume, codec irq is re-enabled and the interrupt status register is checked to see if headphone has been pluggnd/unplugged while the device is suspended. There is still a chance that the headphone gets enabled or disabled after the codec is suspended. disable_irq syncs the threaded irq handler, but soc-jack's threaded irq handler schedules a delayed work to poll gpios (for debounce). This is still OK. The codec won't be powered back on again because all audio paths have been suspended, and there are no force enabled supply widgets (MICBIAS1 is disabled). The gpio status read after codec power off could be wrong, so the gpio values are checked again after resume. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-8-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Stop and restart DSP over suspend/resumeBen Zhang
MCLK1 gets disabled at suspend and re-enabled at resume. Before MCLK1 is re-enabled, if the DSP is already on (either the DSP was left on during suspend, or the DSP is turned on early at resume), i2c register read returns garbage and corrupts the regmap cache. This patch stops the DSP before suspend and restarts it after resume with a dalay to ensure MCLK is on while loading firmware. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-7-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatileBen Zhang
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Add DAPM audio path for hotword streamBen Zhang
Add a DAPM audio path from "DMIC L1" to "DSP Buffer" so that when hotwording is enabled, DAPM does not power off the codec with SND_SOC_BIAS_OFF. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-5-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Enable jack detect while DSP is runningBen Zhang
Before a hotword is detected, GPIO1 pin is configured as IRQ output so that jack detect works. When a hotword is detected, the DSP firmware configures the GPIO1 pin as GPIO1 and drives a 1. rt5677_irq() is called after a rising edge on the GPIO1 pin, due to either jack detect event or hotword event, or both. All possible events are checked and handled in rt5677_irq() where GPIO1 pin is configured back to IRQ output if a hotword is detected. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-4-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Load firmware via SPI using delayed workBen Zhang
The firmware rt5677_elf_vad is an ELF binary obtained from request_firmware(). Sections of the ELF are loaded to the DSP via SPI. A model (e.g. en_us.mmap) can optionally be loaded to the DSP at RT5677_MODEL_ADDR to overwrite the baked-in model in rt5677_elf_vad. Then we switch to DSP mode, load firmware, and let DSP run. When a hotword is detected, an interrupt is fired and rt5677_irq() is called. When 'DSP VAD Switch' is turned off, the codec is set back to normal mode. The kcontrol 'DSP VAD Switch' is automatically enabled/disabled when the hotwording PCM stream is opened/closed. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-2-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFFBen Zhang
Instead of clearing RT5677_PWR_ANLG2 (MX-64h) to 0 at SND_SOC_BIAS_OFF, we only clear the RT5677_PWR_CORE bit which is set at SND_SOC_BIAS_PREPARE. MICBIAS control bits are left unchanged. This fixed the bug where if MICBIAS1 widget is forced on, MICBIAS control bits will be cleared at suspend and never turned back on again, since DAPM thinks the widget is always on. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190906194636.217881-3-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-09ASoC: rt5677: Remove magic number register writesCurtis Malainey
In order to simplify understanding what register values are being written to the codec for debugging more advanced features (such as hotwording) it is best to remove magic numbers Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190906194636.217881-2-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-12ASoC: rt5677: Revert remove superfluous setCurtis Malainey
Commit 4dc057a786dc23 ("ASoC: rt5677: remove superfluous set") was an attempted code cleanup but was incorrectly tested before sent and actually breaks the interrupt since it never resets the value on each loop now. The breakage is most testable when hotwording code is added and also uses the interrupt. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190809215952.155660-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-07-22ASoC: rt5677: remove superfluous setCurtis Malainey
We define this variable with the same value, no need to set it twice Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20190711002838.35363-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-26Merge tag 'v5.2-rc6' into asoc-5.3Mark Brown
Linux 5.2-rc6
2019-06-25ASoC: rt5677: depop stereo dacCurtis Malainey
Upon enabling the ASRC DAC we need a delay to avoid popping the speakers. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Cc: Ross Zwisler <zwisler@chromium.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19ASoC: rt5677: handle concurrent interruptsBen Zhang
The rt5677 driver writes to the IRQ control register within the IRQ handler in order to flip the polarity of the interrupts that have been signalled. If an interrupt fires in the interval between the regmap_read and the regmap_write, it will not trigger a new call to rt5677_irq. Add a bounded loop to rt5677_irq that keeps checking interrupts until none are seen, so that any interrupts that are signalled in that interval are correctly handled. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: rt5677: clear interrupts by polarity flipBen Zhang
The rt5677 jack detection function has a requirement that the polarity of an interrupt be flipped after it fires in order to clear the interrupt. This patch implements an irq_chip with irq_domain directly instead of using regmap-irq, so that interrupt source line polarities can be flipped in the irq handler. The reason that this patch does not add this feature within regmap-irq is that future patches will add hotword detection support to this irq handler. Those patches will require adding additional logic that would not make sense to have in regmap-irq. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: rt5677: move jack-detect init to i2c probeFletcher Woodruff
This patch moves the code to select the gpios for jack detection from rt5677_probe to rt5677_init_irq (called from rt5677_i2c_probe). It also sets some registers to fix bugs related to jack detection, and adds some constants and comments to make it easier to understand what certain register settings are controlling. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-17ASoC: rt5677: fall back to DT prop names on errorFletcher Woodruff
The rt5677 driver uses ACPI-style property names to read from the device API. However, these do not match the property names in _DSD used on the Chromebook Pixel 2015, which are closer to the Device Tree style. Unify the two functions for reading from the device API so that they try ACPI-style names first and fall back to the DT names on error. With this patch, plugging and unplugging the headphone jack switches between headphones and speakers automatically. Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-08ASoC: rt5677: Add component driver nameCurtis Malainey
Add name to component driver so it is possible to lookup the component when needed. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-07ASoC: rt5677: use more of the volume range from DACsDylan Reid
The DACs volume can go over 0, both according to the data sheet and real world testing. The control can go up to +30dB. This was tested by playing audio at full volume on a samus chromebook. Signed-off-by: Dylan Reid <dgreid@chromium.org> Reviewed-by: Hsinyu Chao <hychao@chromium.org> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07ASoC: codecs: fix kernel doc descriptionsPierre-Louis Bossart
Missing or spurious parameter descriptions. Fix warnings with W=1 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-08ASoC: rt5677: Fix initialization of rt5677_of_match.dataMatthias Kaehlcke
The driver expects to find the device id in rt5677_of_match.data, however it is currently assigned to rt5677_of_match.type. Fix this. The problem was found with the help of clang: sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to zero treated as a null pointer constant of type 'const void *' [-Wnon-literal-null-conversion] { .compatible = "realtek,rt5677", RT5677 }, ^~~~~~ Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-02ASoC: rt5677: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1271174 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-18ASoC: rt5677: Convert I2C driver to ->probe_new()Andy Shevchenko
There is no platform code that uses i2c module table. Remove it altogether and adjust ->probe() to be ->probe_new(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-02-12ASoC: rt5645/rt5677: replace codec to componentKuninori Morimoto
Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-09-01Merge remote-tracking branches 'asoc/topic/rt5665', 'asoc/topic/rt5670', ↵Mark Brown
'asoc/topic/rt5677' and 'asoc/topic/samsung' into asoc-next
2017-09-01Merge remote-tracking branch 'asoc/topic/msm8916' into asoc-nextMark Brown
2017-08-25Merge tag 'sound-4.13-rc7' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-rt5677 sound fixes for 4.13-rc7 We're keeping in a good shape, this batch contains just a few small fixes (a regression fix for ASoC rt5677 codec, NULL dereference and error-path fixes in firewire, and a corner-case ioctl error fix for user TLV), as well as usual quirks for USB-audio and HD-audio.
2017-08-24ASoC: rt5677: Reintroduce I2C device IDsTom Rini
Not all devices with ACPI and this combination of sound devices will have the required information provided via ACPI. Reintroduce the I2C device ID to restore sound functionality on on the Chromebook 'Samus' model. [ More background note: the commit a36afb0ab648 ("ASoC: rt5677: Introduce proper table...") moved the i2c ID probed via ACPI ("RT5677CE:00") to a proper acpi_device_id table. Although the action itself is correct per se, the overseen issue is the reference id->driver_data at rt5677_i2c_probe() for retrieving the corresponding chip model for the given id. Since id=NULL is passed for ACPI matching case, we get an Oops now. We already have queued more fixes for 4.14 and they already address the issue, but they are bigger changes that aren't preferable for the late 4.13-rc stage. So, this patch just papers over the bug as a once-off quick fix for a particular ACPI matching. -- tiwai ] Fixes: a36afb0ab648 ("ASoC: rt5677: Introduce proper table for ACPI enumeration") Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-10ASoC: codecs: add const to snd_soc_codec_driver structuresBhumika Goyal
Declare snd_soc_codec_driver structures as const as they are only passed as an argument to the function snd_soc_register_codec. This argument is of type const, so declare the structures with this property as const. In file codecs/sn95031.c, snd_soc_codec_driver structure is also used in a copy operation along with getting passed to snd_soc_register_codec. So, it can be made const too. Done using Coccinelle: @match disable optional_qualifier@ identifier s; position p; @@ static struct snd_soc_codec_driver s@p={...}; @good1@ identifier match.s; position p; @@ snd_soc_register_codec(...,&s@p,...) @bad@ identifier match.s; position p!={match.p,good1.p}; @@ s@p @depends on !bad disable optional_qualifier@ identifier match.s; @@ static +const struct snd_soc_codec_driver s={...}; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-20ASoC: rt5677: Remove never used variablesAndy Shevchenko
There are two variables that have never been used. sound/soc/codecs/rt5677.c:785:35: warning: ‘in_vol_tlv’ defined but not used [-Wunused-const-variable=] static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); sound/soc/codecs/rt5677.c:783:35: warning: ‘out_vol_tlv’ defined but not used [-Wunused-const-variable=] static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); Simple remove them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-19ASoC: rt5677: Refactor code to avoid comparison unsigned >= 0Andy Shevchenko
rt5677_to_irq() has couple of redundant conditionals, one of which compares unsigned variable to be great than or equal to zero which is always true as compiler notices: sound/soc/codecs/rt5677.c: In function ‘rt5677_to_irq’: sound/soc/codecs/rt5677.c:4626:13: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Refactor the code by removing redundant conditionals. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-07-19ASoC: rt5677: Hide platform data in the module sourcesAndy Shevchenko
There is no user of legacy platform data. Remove separate header and hide its content inside module sources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-16ASoC: rt5677: Move platform code to board fileAndy Shevchenko
GPIO ACPI mapping table is defined on platform basis. Codec driver shouldn't have known what platform is using it. Make codec driver more generic by moving platform code to where it belongs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>