| Age | Commit message (Collapse) | Author |
|---|
|
The EVM_NEW_FILE flag is unset if the file already existed at the time
of open and this can be checked without looking at i_writecount.
Not accessing it reduces traffic on the cacheline during parallel open
of the same file and drop the evm_file_release routine from second place
to bottom of the profile.
Fixes: 75a323e604fc ("evm: Make it independent from 'integrity' LSM")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
To be consistent with most LSM hooks, convert the return value of
hook inode_copy_up_xattr to 0 or a negative error code.
Before:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, 1 when
discarding xattr, -EOPNOTSUPP if it does not know xattr, or any
other negative error code otherwise.
After:
- Hook inode_copy_up_xattr returns 0 when accepting xattr, *-ECANCELED*
when discarding xattr, -EOPNOTSUPP if it does not know xattr, or
any other negative error code otherwise.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Rename is_unsupported_fs to is_unsupported_hmac_fs since now only HMAC is
unsupported.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Now that EVM supports RSA signatures for previously completely
unsupported filesystems rename the flag SB_I_EVM_UNSUPPORTED to
SB_I_EVM_HMAC_UNSUPPORTED to reflect that only HMAC is not supported.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Unsupported filesystems currently do not enforce any signatures. Add
support for signature enforcement of the "original" and "portable &
immutable" signatures when EVM_INIT_X509 is enabled.
The "original" signature type contains filesystem specific metadata.
Thus it cannot be copied up and verified. However with EVM_INIT_X509
and EVM_ALLOW_METADATA_WRITES enabled, the "original" file signature
may be written.
When EVM_ALLOW_METADATA_WRITES is not set or once it is removed from
/sys/kernel/security/evm by setting EVM_INIT_HMAC for example, it is not
possible to write or remove xattrs on the overlay filesystem.
This change still prevents EVM from writing HMAC signatures on
unsupported filesystem when EVM_INIT_HMAC is enabled.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
On stacked filesystem the metadata inode may be different than the one
file data inode and therefore changes to it need to be detected
independently. Therefore, store the i_version, device number, and inode
number associated with the file metadata inode.
Implement a function to detect changes to the inode and if a change is
detected reset the evm_status. This function will be called by IMA when
IMA detects that the metadata inode is different from the file's inode.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
To support "portable and immutable signatures" on otherwise unsupported
filesystems, determine the EVM signature type by the content of a file's
xattr. If the file has the appropriate signature type then allow it to be
copied up. All other signature types are discarded as before.
"Portable and immutable" EVM signatures can be copied up by stacked file-
system since the metadata their signature covers does not include file-
system-specific data such as a file's inode number, generation, and UUID.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Copying up xattrs is solely based on the security xattr name. For finer
granularity add a dentry parameter to the security_inode_copy_up_xattr
hook definition, allowing decisions to be based on the xattr content as
well.
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM,SELinux)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Define a new structure for EVM-specific metadata, called evm_iint_cache,
and embed it in the inode security blob. Introduce evm_iint_inode() to
retrieve metadata, and register evm_inode_alloc_security() for the
inode_alloc_security LSM hook, to initialize the structure (before
splitting metadata, this task was done by iint_init_always()).
Keep the non-NULL checks after calling evm_iint_inode() except in
evm_inode_alloc_security(), to take into account inodes for which
security_inode_alloc() was not called. When using shared metadata,
obtaining a NULL pointer from integrity_iint_find() meant that the file
wasn't in the IMA policy. Now, because IMA and EVM use disjoint metadata,
the EVM status has to be stored for every inode regardless of the IMA
policy.
Given that from now on EVM relies on its own metadata, remove the iint
parameter from evm_verifyxattr(). Also, directly retrieve the iint in
evm_verify_hmac(), called by both evm_verifyxattr() and
evm_verify_current_integrity(), since now there is no performance penalty
in retrieving EVM metadata (constant time).
Replicate the management of the IMA_NEW_FILE flag, by introducing
evm_post_path_mknod() and evm_file_release() to respectively set and clear
the newly introduced flag EVM_NEW_FILE, at the same time IMA does. Like for
IMA, select CONFIG_SECURITY_PATH when EVM is enabled, to ensure that files
are marked as new.
Unlike ima_post_path_mknod(), evm_post_path_mknod() cannot check if a file
must be appraised. Thus, it marks all affected files. Also, it does not
clear EVM_NEW_FILE depending on i_version, but that is not a problem
because IMA_NEW_FILE is always cleared when set in ima_check_last_writer().
Move the EVM-specific flag EVM_IMMUTABLE_DIGSIG to
security/integrity/evm/evm.h, since that definition is now unnecessary in
the common integrity layer.
Finally, switch to the LSM reservation mechanism for the EVM xattr, and
consequently decrement by one the number of xattrs to allocate in
security_inode_init_security().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As for IMA, move hardcoded EVM function calls from various places in the
kernel to the LSM infrastructure, by introducing a new LSM named 'evm'
(last and always enabled like 'ima'). The order in the Makefile ensures
that 'evm' hooks are executed after 'ima' ones.
Make EVM functions as static (except for evm_inode_init_security(), which
is exported), and register them as hook implementations in init_evm_lsm().
Also move the inline functions evm_inode_remove_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_set_acl() from the public
evm.h header to evm_main.c.
Unlike before (see commit to move IMA to the LSM infrastructure),
evm_inode_post_setattr(), evm_inode_post_set_acl(),
evm_inode_post_remove_acl(), and evm_inode_post_removexattr() are not
executed for private inodes.
Finally, add the LSM_ID_EVM case in lsm_list_modules_test.c
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change evm_inode_post_setxattr() definition, so that it can be registered
as implementation of the inode_post_setxattr hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change evm_inode_setxattr() definition, so that it can be registered as
implementation of the inode_setxattr hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change evm_inode_post_setattr() definition, so that it can be registered as
implementation of the inode_post_setattr hook (to be introduced).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Identify EVM unsupported filesystems by defining a new flag
SB_I_EVM_UNSUPPORTED.
Don't verify, write, remove or update 'security.evm' on unsupported
filesystems.
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The security.evm HMAC and the original file signatures contain
filesystem specific data. As a result, the HMAC and signature
are not the same on the stacked and backing filesystems.
Don't copy up 'security.evm'.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The header file crypto/algapi.h is for internal use only. Use the
header file crypto/utils.h instead.
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently, evm_inode_init_security() processes a single LSM xattr from the
array passed by security_inode_init_security(), and calculates the HMAC on
it and other inode metadata.
As the LSM infrastructure now can pass to EVM an array with multiple
xattrs, scan them until the terminator (xattr name NULL), and calculate the
HMAC on all of them.
Also, double check that the xattrs array terminator is the first non-filled
slot (obtained with lsm_get_xattr_slot()). Consumers of the xattrs array,
such as the initxattrs() callbacks, rely on the terminator.
Finally, change the name of the lsm_xattr parameter of evm_init_hmac() to
xattrs, to reflect the new type of information passed.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Change the evm_inode_init_security() definition to align with the LSM
infrastructure. Keep the existing behavior of including in the HMAC
calculation only the first xattr provided by LSMs.
Changing the evm_inode_init_security() definition requires passing the
xattr array allocated by security_inode_init_security(), and the number of
xattrs filled by previously invoked LSMs.
Use the newly introduced lsm_get_xattr_slot() to position EVM correctly in
the xattrs array, like a regular LSM, and to increment the number of filled
slots. For now, the LSM infrastructure allocates enough xattrs slots to
store the EVM xattr, without using the reservation mechanism.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix build warnings (function parameters description) for
evm_read_protected_xattrs(), evm_set_key() and evm_verifyxattr().
Fixes: 7626676320f3 ("evm: provide a function to set the EVM key from the kernel") # v4.5+
Fixes: 8314b6732ae4 ("ima: Define new template fields xattrnames, xattrlengths and xattrvalues") # v5.14+
Fixes: 2960e6cb5f7c ("evm: additional parameter to pass integrity cache entry 'iint'") # v3.2+
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Add the description for missing parameters of evm_inode_setattr() to
avoid the warning arising with W=n compile option.
Fixes: 817b54aa45db ("evm: add evm_inode_setattr to prevent updating an invalid security.evm") # v3.2+
Fixes: c1632a0f1120 ("fs: port ->setattr() to pass mnt_idmap") # v6.3+
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improve the error handling in the device cgroup such that memory
allocation failures when updating the access policy do not
potentially alter the policy.
- Some minor fixes to reiserfs to ensure that it properly releases
LSM-related xattr values.
- Update the security_socket_getpeersec_stream() LSM hook to take
sockptr_t values.
Previously the net/BPF folks updated the getsockopt code in the
network stack to leverage the sockptr_t type to make it easier to
pass both kernel and __user pointers, but unfortunately when they did
so they didn't convert the LSM hook.
While there was/is no immediate risk by not converting the LSM hook,
it seems like this is a mistake waiting to happen so this patch
proactively does the LSM hook conversion.
- Convert vfs_getxattr_alloc() to return an int instead of a ssize_t
and cleanup the callers. Internally the function was never going to
return anything larger than an int and the callers were doing some
very odd things casting the return value; this patch fixes all that
and helps bring a bit of sanity to vfs_getxattr_alloc() and its
callers.
- More verbose, and helpful, LSM debug output when the system is booted
with "lsm.debug" on the command line. There are examples in the
commit description, but the quick summary is that this patch provides
better information about which LSMs are enabled and the ordering in
which they are processed.
- General comment and kernel-doc fixes and cleanups.
* tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: Fix description of fs_context_parse_param
lsm: Add/fix return values in lsm_hooks.h and fix formatting
lsm: Clarify documentation of vm_enough_memory hook
reiserfs: Add missing calls to reiserfs_security_free()
lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths
device_cgroup: Roll back to original exceptions after copy failure
LSM: Better reporting of actual LSMs at boot
lsm: make security_socket_getpeersec_stream() sockptr_t safe
audit: Fix some kernel-doc warnings
lsm: remove obsoleted comments for security hooks
fs: edit a comment made in bad taste
|
|
The vfs_getxattr_alloc() function currently returns a ssize_t value
despite the fact that it only uses int values internally for return
values. Fix this by converting vfs_getxattr_alloc() to return an
int type and adjust the callers as necessary. As part of these
caller modifications, some of the callers are fixed to properly free
the xattr value buffer on both success and failure to ensure that
memory is not leaked in the failure case.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When evm_status is INTEGRITY_PASS then this function returns early and so
later codepaths that check for evm_status != INTEGRITY_PASS can be removed
as they are dead code.
Fixes: e61b135f7bfe ("integrity: implement get and set acl hook")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The security and integrity infrastructure has dedicated hooks now so
evm_xattr_acl_change() is dead code. Before this commit the callchain was:
evm_protect_xattr()
-> evm_xattr_change()
-> evm_xattr_acl_change()
where evm_protect_xattr() was hit from evm_inode_setxattr() and
evm_inode_removexattr(). But now we have evm_inode_set_acl() and
evm_inode_remove_acl() and have switched over the vfs to rely on the posix
acl api so the code isn't hit anymore.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
So far posix acls were passed as a void blob to the security and
integrity modules. Some of them like evm then proceed to interpret the
void pointer and convert it into the kernel internal struct posix acl
representation to perform their integrity checking magic. This is
obviously pretty problematic as that requires knowledge that only the
vfs is guaranteed to have and has lead to various bugs. Add a proper
security hook for setting posix acls and pass down the posix acls in
their appropriate vfs format instead of hacking it through a void
pointer stored in the uapi format.
I spent considerate time in the security module and integrity
infrastructure and audited all codepaths. EVM is the only part that
really has restrictions based on the actual posix acl values passed
through it (e.g., i_mode). Before this dedicated hook EVM used to translate
from the uapi posix acl format sent to it in the form of a void pointer
into the vfs format. This is not a good thing. Instead of hacking around in
the uapi struct give EVM the posix acls in the appropriate vfs format and
perform sane permissions checks that mirror what it used to to in the
generic xattr hook.
IMA doesn't have any restrictions on posix acls. When posix acls are
changed it just wants to update its appraisal status to trigger an EVM
revalidation.
The removal of posix acls is equivalent to passing NULL to the posix set
acl hooks. This is the same as before through the generic xattr api.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Acked-by: Paul Moore <paul@paul-moore.com> (LSM)
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
The uapi POSIX ACL struct passed through the value argument during
setxattr() contains {g,u}id values encoded via ACL_{GROUP,USER} entries
that should actually be stored in the form of k{g,u}id_t (See [1] for a
long explanation of the issue.).
In 0c5fd887d2bb ("acl: move idmapped mount fixup into vfs_{g,s}etxattr()")
we took the mount's idmapping into account in order to let overlayfs
handle POSIX ACLs on idmapped layers correctly. The fixup is currently
performed directly in vfs_setxattr() which piles on top of the earlier
hackiness by handling the mount's idmapping and stuff the vfs{g,u}id_t
values into the uapi struct as well. While that is all correct and works
fine it's just ugly.
Now that we have introduced vfs_make_posix_acl() earlier move handling
idmapped mounts out of vfs_setxattr() and into the POSIX ACL handler
where it belongs.
Note that we also need to call vfs_make_posix_acl() for EVM which
interpretes POSIX ACLs during security_inode_setxattr(). Leave them a
longer comment for future reference.
All filesystems that support idmapped mounts via FS_ALLOW_IDMAP use the
standard POSIX ACL xattr handlers and are covered by this change. This
includes overlayfs which simply calls vfs_{g,s}etxattr().
The following filesystems use custom POSIX ACL xattr handlers: 9p, cifs,
ecryptfs, and ntfs3 (and overlayfs but we've covered that in the paragraph
above) and none of them support idmapped mounts yet.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org/ [1]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Aside from the one EVM cleanup patch, all the other changes are kexec
related.
On different architectures different keyrings are used to verify the
kexec'ed kernel image signature. Here are a number of preparatory
cleanup patches and the patches themselves for making the keyrings -
builtin_trusted_keyring, .machine, .secondary_trusted_keyring, and
.platform - consistent across the different architectures"
* tag 'integrity-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification
arm64: kexec_file: use more system keyrings to verify kernel image signature
kexec, KEYS: make the code in bzImage64_verify_sig generic
kexec: clean up arch_kexec_kernel_verify_sig
kexec: drop weak attribute from functions
kexec_file: drop weak attribute from functions
evm: Use IS_ENABLED to initialize .enabled
|
|
Use IS_ENABLED(CONFIG_XXX) instead of #ifdef/#endif statements to
initialize .enabled, minor simplicity improvement.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Now that we introduced new infrastructure to increase the type safety
for filesystems supporting idmapped mounts port the first part of the
vfs over to them.
This ports the attribute changes codepaths to rely on the new better
helpers using a dedicated type.
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Fileystems raising FS_ALLOW_IDMAP can't simply write ia_vfs{g,u}id to
inode->i_{g,u}id since they are different types. Instead they need to
use the dedicated vfs{g,u}id_to_k{g,u}id() helpers that map the
vfs{g,u}id into the filesystem.
The other nice effect is that filesystems like overlayfs don't need to
care about idmappings explicitly anymore and can simply set up struct
iattr accordingly directly.
Link: https://lore.kernel.org/lkml/CAHk-=win6+ahs1EwLkcq8apqLi_1wXFWbrPf340zYEhObpz4jA@mail.gmail.com [1]
Link: https://lore.kernel.org/r/20220621141454.2914719-9-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Before this change we used to take a shortcut and place the actual
values that would be written to inode->i_{g,u}id into struct iattr. This
had the advantage that we moved idmappings mostly out of the picture
early on but it made reasoning about changes more difficult than it
should be.
The filesystem was never explicitly told that it dealt with an idmapped
mount. The transition to the value that needed to be stored in
inode->i_{g,u}id appeared way too early and increased the probability of
bugs in various codepaths.
We know place the same value in struct iattr no matter if this is an
idmapped mount or not. The vfs will only deal with type safe
vfs{g,u}id_t. This makes it massively safer to perform permission checks
as the type will tell us what checks we need to perform and what helpers
we need to use.
Adapt the security_inode_setattr() helper to pass down the mount's
idmapping to account for that change.
Link: https://lore.kernel.org/r/20220621141454.2914719-8-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Earlier we introduced new helpers to abstract ownership update and
remove code duplication. This converts all filesystems supporting
idmapped mounts to make use of these new helpers.
For now we always pass the initial idmapping which makes the idmapping
functions these helpers call nops.
This is done because we currently always pass the actual value to be
written to i_{g,u}id via struct iattr. While this allowed us to treat
the {g,u}id values in struct iattr as values that can be directly
written to inode->i_{g,u}id it also increases the potential for
confusion for filesystems.
Now that we are have dedicated types to prevent this confusion we will
ultimately only map the value from the idmapped mount into a filesystem
value that can be written to inode->i_{g,u}id when the filesystem
actually updates the inode. So pass down the initial idmapping until we
finished that conversion at which point we pass down the mount's
idmapping.
No functional changes intended.
Link: https://lore.kernel.org/r/20220621141454.2914719-6-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Return INTEGRITY_PASS for the enum integrity_status rather than 0.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65c1 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The evm_fixmode is only configurable by command-line option and it is never
modified outside initcalls, so declaring it with __ro_after_init is better.
Signed-off-by: Austin Kim <austin.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Output the data used in calculating the EVM digest and the resulting
digest as ascii hexadecimal strings.
Suggested-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> (CONFIG_DYNAMIC_DEBUG)
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <lkp@intel.com> (Use %zu for size_t)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The endianness of a variable written to the measurement list cannot be
determined at compile time, as it depends on the value of the
ima_canonical_fmt global variable (set through a kernel option with the
same name if the machine is big endian).
If ima_canonical_fmt is false, the endianness of a variable is the same as
the machine; if ima_canonical_fmt is true, the endianness is little endian.
The warning arises due to this type of instruction:
var = cpu_to_leXX(var)
which tries to assign a value in little endian to a variable with native
endianness (little or big endian).
Given that the variables set with this instruction are not used in any
operation but just written to a buffer, it is safe to force the type of the
value being set to be the same of the type of the variable with:
var = (__force <var type>)cpu_to_leXX(var)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
This patch defines the new template fields xattrnames, xattrlengths and
xattrvalues, which contain respectively a list of xattr names (strings,
separated by |), lengths (u32, hex) and values (hex). If an xattr is not
present, the name and length are not displayed in the measurement list.
Reported-by: kernel test robot <lkp@intel.com> (Missing prototype def)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
Currently, the evm_config_default_xattrnames array contains xattr names
only related to LSMs which are enabled in the kernel configuration.
However, EVM portable signatures do not depend on local information and a
vendor might include in the signature calculation xattrs that are not
enabled in the target platform.
Just including all xattrs names in evm_config_default_xattrnames is not a
safe approach, because a target system might have already calculated
signatures or HMACs based only on the enabled xattrs. After applying this
patch, EVM would verify those signatures and HMACs with all xattrs instead.
The non-enabled ones, which could possibly exist, would cause a
verification error.
Thus, this patch adds a new field named enabled to the xattr_list
structure, which is set to true if the LSM associated to a given xattr name
is enabled in the kernel configuration. The non-enabled xattrs are taken
into account only in evm_calc_hmac_or_hash(), if the passed security.evm
type is EVM_XATTR_PORTABLE_DIGSIG.
The new function evm_protected_xattr_if_enabled() has been defined so that
IMA can include all protected xattrs and not only the enabled ones in the
measurement list, if the new template fields xattrnames, xattrlengths or
xattrvalues have been included in the template format.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
With the patch to allow xattr/attr operations if a portable signature
verification fails, cp and tar can copy all xattrs/attrs so that at the
end of the process verification succeeds.
However, it might happen that the xattrs/attrs are already set to the
correct value (taken at signing time) and signature verification succeeds
before the copy has completed. For example, an archive might contains files
owned by root and the archive is extracted by root.
Then, since portable signatures are immutable, all subsequent operations
fail (e.g. fchown()), even if the operation is legitimate (does not alter
the current value).
This patch avoids this problem by reporting successful operation to user
space when that operation does not alter the current value of xattrs/attrs.
With this patch, the one that introduces evm_hmac_disabled() and the one
that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM
portable signatures can be used without disabling metadata verification
(by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata
verification enabled, altering immutable metadata protected with a portable
signature that was successfully verified will be denied (existing
behavior).
Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function]
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
In preparation for 'evm: Allow setxattr() and setattr() for unmodified
metadata', this patch passes mnt_userns to the inode set/remove xattr hooks
so that the GID of the inode on an idmapped mount is correctly determined
by posix_acl_update_mode().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
If files with portable signatures are copied from one location to another
or are extracted from an archive, verification can temporarily fail until
all xattrs/attrs are set in the destination. Only portable signatures may
be moved or copied from one file to another, as they don't depend on
system-specific information such as the inode generation. Instead portable
signatures must include security.ima.
Unlike other security.evm types, EVM portable signatures are also
immutable. Thus, it wouldn't be a problem to allow xattr/attr operations
when verification fails, as portable signatures will never be replaced with
the HMAC on possibly corrupted xattrs/attrs.
This patch first introduces a new integrity status called
INTEGRITY_FAIL_IMMUTABLE, that allows callers of
evm_verify_current_integrity() to detect that a portable signature didn't
pass verification and then adds an exception in evm_protect_xattr() and
evm_inode_setattr() for this status and returns 0 instead of -EPERM.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
When a file is being created, LSMs can set the initial label with the
inode_init_security hook. If no HMAC key is loaded, the new file will have
LSM xattrs but not the HMAC. It is also possible that the file remains
without protected xattrs after creation if no active LSM provided it, or
because the filesystem does not support them.
Unfortunately, EVM will deny any further metadata operation on new files,
as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected
xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected
xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would
limit the usability of EVM when only a public key is loaded, as commands
such as cp or tar with the option to preserve xattrs won't work.
This patch introduces the evm_hmac_disabled() function to determine whether
or not it is safe to ignore verification errors, based on the ability of
EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be
loaded in the future due to the EVM_SETUP_COMPLETE initialization flag,
allowing an operation despite the attrs/xattrs being found invalid will not
make them valid.
Since the post hooks can be executed even when the HMAC key is not loaded,
this patch also ensures that the EVM_INIT_HMAC initialization flag is set
before the post hooks call evm_update_evmxattr().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
When EVM_ALLOW_METADATA_WRITES is set, EVM allows any operation on
metadata. Its main purpose is to allow users to freely set metadata when it
is protected by a portable signature, until an HMAC key is loaded.
However, callers of evm_verifyxattr() are not notified about metadata
changes and continue to rely on the last status returned by the function.
For example IMA, since it caches the appraisal result, will not call again
evm_verifyxattr() until the appraisal flags are cleared, and will grant
access to the file even if there was a metadata operation that made the
portable signature invalid.
This patch introduces evm_revalidate_status(), which callers of
evm_verifyxattr() can use in their xattr hooks to determine whether
re-validation is necessary and to do the proper actions. IMA calls it in
its xattr hooks to reset the appraisal flags, so that the EVM status is
re-evaluated after a metadata operation.
Lastly, this patch also adds a call to evm_reset_status() in
evm_inode_post_setattr() to invalidate the cached EVM status after a
setattr operation.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
evm_inode_init_security() requires an HMAC key to calculate the HMAC on
initial xattrs provided by LSMs. However, it checks generically whether a
key has been loaded, including also public keys, which is not correct as
public keys are not suitable to calculate the HMAC.
Originally, support for signature verification was introduced to verify a
possibly immutable initial ram disk, when no new files are created, and to
switch to HMAC for the root filesystem. By that time, an HMAC key should
have been loaded and usable to calculate HMACs for new files.
More recently support for requiring an HMAC key was removed from the
kernel, so that signature verification can be used alone. Since this is a
legitimate use case, evm_inode_init_security() should not return an error
when no HMAC key has been loaded.
This patch fixes this problem by replacing the evm_key_loaded() check with
a check of the EVM_INIT_HMAC flag in evm_initialized.
Fixes: 26ddabfe96b ("evm: enable EVM when X509 certificate is loaded")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.5.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
