summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2024-08-10Merge tag 'nfsd-6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Two minor fixes for recent changes * tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets sunrpc: avoid -Wformat-security warning
2024-08-08ethtool: Fix context creation with no parametersGal Pressman
The 'at least one change' requirement is not applicable for context creation, skip the check in such case. This allows a command such as 'ethtool -X eth0 context new' to work. The command works by mistake when using older versions of userspace ethtool due to an incompatibility issue where rxfh.input_xfrm is passed as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent userspace. This patch does not try to solve the incompatibility issue. Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/ Fixes: 84a1d9c48200 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20240807173352.3501746-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08net: ethtool: fix off-by-one error in max RSS context IDsEdward Cree
Both ethtool_ops.rxfh_max_context_id and the default value used when it's not specified are supposed to be exclusive maxima (the former is documented as such; the latter, U32_MAX, cannot be used as an ID since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an inclusive maximum. Subtract one from 'limit' to produce an inclusive maximum, and pass that to xa_alloc(). Increase bnxt's max by one to prevent a (very minor) regression, as BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a leftover from old driver code that managed context IDs itself. Rename rxfh_max_context_id to rxfh_max_num_contexts to make its semantics (hopefully) more obvious. Fixes: 847a8ab18676 ("net: ethtool: let the core choose RSS context IDs") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-08l2tp: fix lockdep splatJames Chapman
When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07Merge tag 'for-net-2024-08-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - hci_sync: avoid dup filtering when passive scanning with adv monitor - hci_qca: don't call pwrseq_power_off() twice for QCA6390 - hci_qca: fix QCA6390 support on non-DT platforms - hci_qca: fix a NULL-pointer derefence at shutdown - l2cap: always unlock channel in l2cap_conless_channel() * tag 'for-net-2024-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor Bluetooth: l2cap: always unlock channel in l2cap_conless_channel() Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 ==================== Link: https://patch.msgid.link/20240807210103.142483-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07net/smc: add the max value of fallback reason countZhengchao Shao
The number of fallback reasons defined in the smc_clc.h file has reached 36. For historical reasons, some are no longer quoted, and there's 33 actually in use. So, add the max value of fallback reason count to 36. Fixes: 6ac1e6563f59 ("net/smc: support smc v2.x features validate") Fixes: 7f0620b9940b ("net/smc: support max connections per lgr negotiation") Fixes: 69b888e3bb4b ("net/smc: support max links per lgr negotiation in clc handshake") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20240805043856.565677-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-07Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitorAnton Khirnov
This restores behaviour (including the comment) from now-removed hci_request.c, and also matches existing code for active scanning. Without this, the duplicates filter is always active when passive scanning, which makes it impossible to work with devices that send nontrivial dynamic data in their advertisement reports. Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Anton Khirnov <anton@khirnov.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-07Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()Dmitry Antipov
Add missing call to 'l2cap_chan_unlock()' on receive error handling path in 'l2cap_conless_channel()'. Fixes: a24cce144b98 ("Bluetooth: Fix reference counting of global L2CAP channels") Reported-by: syzbot+45ac74737e866894acb0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=45ac74737e866894acb0 Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-06net: linkwatch: use system_unbound_wqEric Dumazet
linkwatch_event() grabs possibly very contended RTNL mutex. system_wq is not suitable for such work. Inspired by many noisy syzbot reports. 3 locks held by kworker/0:7/5266: #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3206 [inline] #0: ffff888015480948 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x90a/0x1830 kernel/workqueue.c:3312 #1: ffffc90003f6fd00 ((linkwatch_work).work){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3207 [inline] , at: process_scheduled_works+0x945/0x1830 kernel/workqueue.c:3312 #2: ffffffff8fa6f208 (rtnl_mutex){+.+.}-{3:3}, at: linkwatch_event+0xe/0x60 net/core/link_watch.c:276 Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240805085821.1616528-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-05net: bridge: mcast: wait for previous gc cycles when removing portNikolay Aleksandrov
syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437 Reported-by: syzbot+263426984509be19c9a0@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0 Fixes: e12cec65b554 ("net: bridge: mcast: destroy all entries via gc") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20240802080730.3206303-1-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-04net/tcp: Disable TCP-AO static key after RCU grace periodDmitry Safonov
The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr Cc: stable@kernel.org Fixes: 67fa83f7c86a ("net/tcp: Add static_key for TCP-AO") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-02sctp: Fix null-ptr-deref in reuseport_add_sock().Kuniyuki Iwashima
syzbot reported a null-ptr-deref while accessing sk2->sk_reuseport_cb in reuseport_add_sock(). [0] The repro first creates a listener with SO_REUSEPORT. Then, it creates another listener on the same port and concurrently closes the first listener. The second listen() calls reuseport_add_sock() with the first listener as sk2, where sk2->sk_reuseport_cb is not expected to be cleared concurrently, but the close() does clear it by reuseport_detach_sock(). The problem is SCTP does not properly synchronise reuseport_alloc(), reuseport_add_sock(), and reuseport_detach_sock(). The caller of reuseport_alloc() and reuseport_{add,detach}_sock() must provide synchronisation for sockets that are classified into the same reuseport group. Otherwise, such sockets form multiple identical reuseport groups, and all groups except one would be silently dead. 1. Two sockets call listen() concurrently 2. No socket in the same group found in sctp_ep_hashtable[] 3. Two sockets call reuseport_alloc() and form two reuseport groups 4. Only one group hit first in __sctp_rcv_lookup_endpoint() receives incoming packets Also, the reported null-ptr-deref could occur. TCP/UDP guarantees that would not happen by holding the hash bucket lock. Let's apply the locking strategy to __sctp_hash_endpoint() and __sctp_unhash_endpoint(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 10230 Comm: syz-executor119 Not tainted 6.10.0-syzkaller-12585-g301927d2d2eb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:reuseport_add_sock+0x27e/0x5e0 net/core/sock_reuseport.c:350 Code: 00 0f b7 5d 00 bf 01 00 00 00 89 de e8 1b a4 ff f7 83 fb 01 0f 85 a3 01 00 00 e8 6d a0 ff f7 49 8d 7e 12 48 89 f8 48 c1 e8 03 <42> 0f b6 04 28 84 c0 0f 85 4b 02 00 00 41 0f b7 5e 12 49 8d 7e 14 RSP: 0018:ffffc9000b947c98 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8880252ddf98 RCX: ffff888079478000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000012 RBP: 0000000000000001 R08: ffffffff8993e18d R09: 1ffffffff1fef385 R10: dffffc0000000000 R11: fffffbfff1fef386 R12: ffff8880252ddac0 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f24e45b96c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcced5f7b8 CR3: 00000000241be000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sctp_hash_endpoint net/sctp/input.c:762 [inline] sctp_hash_endpoint+0x52a/0x600 net/sctp/input.c:790 sctp_listen_start net/sctp/socket.c:8570 [inline] sctp_inet_listen+0x767/0xa20 net/sctp/socket.c:8625 __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] __se_sys_listen net/socket.c:1900 [inline] __x64_sys_listen+0x5a/0x70 net/socket.c:1900 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f24e46039b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f24e45b9228 EFLAGS: 00000246 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 00007f24e468e428 RCX: 00007f24e46039b9 RDX: 00007f24e46039b9 RSI: 0000000000000003 RDI: 0000000000000004 RBP: 00007f24e468e420 R08: 00007f24e45b96c0 R09: 00007f24e45b96c0 R10: 00007f24e45b96c0 R11: 0000000000000246 R12: 00007f24e468e42c R13: 00007f24e465a5dc R14: 0020000000000001 R15: 00007ffcced5f7d8 </TASK> Modules linked in: Fixes: 6ba845740267 ("sctp: process sk_reuseport in sctp_get_port_local") Reported-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e6979a5d2f10ecb700e4 Tested-by: syzbot+e6979a5d2f10ecb700e4@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20240731234624.94055-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01mptcp: pm: do not ignore 'subflow' if 'signal' flag is also setMatthieu Baerts (NGI0)
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and 'subflow' flags, resulted in the creation of a subflow and an address announcement using the address linked to this endpoint. After this commit, only the address announcement was done, ignoring the 'subflow' flag. That's because the same bitmap is used for the two flags. It is OK to keep this single bitmap, the already selected local endpoint simply have to be re-used, but not via select_local_address() not to look at the just modified bitmap. Note that it is unusual to set the two flags together: creating a new subflow using a new local address will implicitly advertise it to the other peer. So in theory, no need to advertise it explicitly as well. Maybe there are use-cases -- the subflow might not reach the other peer that way, we can ask the other peer to try initiating the new subflow without delay -- or very likely the user is confused, and put both flags "just to be sure at least the right one is set". Still, if it is allowed, the kernel should do what has been asked: using this endpoint to announce the address and to create a new subflow from it. An alternative is to forbid the use of the two flags together, but that's probably too late, there are maybe use-cases, and it was working before. This patch will avoid people complaining subflows are not created using the endpoint they added with the 'subflow' and 'signal' flag. Note that with the current patch, the subflow might not be created in some corner cases, e.g. if the 'subflows' limit was reached when sending the ADD_ADDR, but changed later on. It is probably not worth splitting id_avail_bitmap per target ('signal', 'subflow'), which will add another large field to the msk "just" to track (again) endpoints. Anyway, currently when the limits are changed, the kernel doesn't check if new subflows can be created or removed, because we would need to keep track of the received ADD_ADDR, and more. It sounds OK to assume that the limits should be properly configured before establishing new connections. Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01mptcp: pm: don't try to create sf if alloc failedMatthieu Baerts (NGI0)
It sounds better to avoid wasting cycles and / or put extreme memory pressure on the system by trying to create new subflows if it was not possible to add a new item in the announce list. While at it, a warning is now printed if the entry was already in the list as it should not happen with the in-kernel path-manager. With this PM, mptcp_pm_alloc_anno_list() should only fail in case of memory pressure. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01mptcp: pm: reduce indentation blocksMatthieu Baerts (NGI0)
That will simplify the following commits. No functional changes intended. Suggested-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01mptcp: pm: deny endp with signal + subflow + portMatthieu Baerts (NGI0)
As mentioned in the 'Fixes' commit, the port flag is only supported by the 'signal' flag, and not by the 'subflow' one. Then if both the 'signal' and 'subflow' flags are set, the problem is the same: the feature cannot work with the 'subflow' flag. Technically, if both the 'signal' and 'subflow' flags are set, it will be possible to create the listening socket, but not to establish a subflow using this source port. So better to explicitly deny it, not to create some confusions because the expected behaviour is not possible. Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01mptcp: fully established after ADD_ADDR echo on MPJMatthieu Baerts (NGI0)
Before this patch, receiving an ADD_ADDR echo on the just connected MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was resulting in an MP_RESET. That's because only ACKs with a DSS or ADD_ADDRs without the echo bit were allowed. Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as we are not supposed to send an ADD_ADDR before because it requires to be in full established mode first. For the MP_JOIN 3WHS, that's different: the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo can be received on the recently created one. The other peer will already be in fully established, so it is allowed to send that. We can then relax the conditions here to accept the ADD_ADDR echo for MPJ subflows. Fixes: 67b12f792d5e ("mptcp: full fully established support after ADD_ADDR") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-01Merge tag 'net-6.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wireless, bleutooth, BPF and netfilter. Current release - regressions: - core: drop bad gso csum_start and offset in virtio_net_hdr - wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove - eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic() - phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c Current release - new code bugs: - smc: prevent UAF in inet_create() - bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend - eth: bnxt: reject unsupported hash functions Previous releases - regressions: - sched: act_ct: take care of padding in struct zones_ht_key - netfilter: fix null-ptr-deref in iptable_nat_table_init(). - tcp: adjust clamping window for applications specifying SO_RCVBUF Previous releases - always broken: - ethtool: rss: small fixes to spec and GET - mptcp: - fix signal endpoint re-add - pm: fix backup support in signal endpoints - wifi: ath12k: fix soft lockup on suspend - eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings() - eth: ice: fix AF_XDP ZC timeout and concurrency issues - eth: mlx5: - fix missing lock on sync reset reload - fix error handling in irq_pool_request_irq" * tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) mptcp: fix duplicate data handling mptcp: fix bad RCVPRUNED mib accounting ipv6: fix ndisc_is_useropt() handling for PIO igc: Fix double reset adapter triggered from a single taprio cmd net: MAINTAINERS: Demote Qualcomm IPA to "maintained" net: wan: fsl_qmc_hdlc: Discard received CRC net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys net/mlx5e: Fix CT entry update leaks of modify header context net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability net/mlx5: Fix missing lock on sync reset reload net/mlx5: Lag, don't use the hardcoded value of the first port net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule net/mlx5: Fix error handling in irq_pool_request_irq net/mlx5: Always drain health in shutdown callback net: Add skbuff.h to MAINTAINERS r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). net: drop bad gso csum_start and offset in virtio_net_hdr ...
2024-08-01mptcp: fix duplicate data handlingPaolo Abeni
When a subflow receives and discards duplicate data, the mptcp stack assumes that the consumed offset inside the current skb is zero. With multiple subflows receiving data simultaneously such assertion does not held true. As a result the subflow-level copied_seq will be incorrectly increased and later on the same subflow will observe a bad mapping, leading to subflow reset. Address the issue taking into account the skb consumed offset in mptcp_subflow_discard_data(). Fixes: 04e4cd4f7ca4 ("mptcp: cleanup mptcp_subflow_discard_data()") Cc: stable@vger.kernel.org Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-01mptcp: fix bad RCVPRUNED mib accountingPaolo Abeni
Since its introduction, the mentioned MIB accounted for the wrong event: wake-up being skipped as not-needed on some edge condition instead of incoming skb being dropped after landing in the (subflow) receive queue. Move the increment in the correct location. Fixes: ce599c516386 ("mptcp: properly account bulk freed memory") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-01Merge tag 'nf-24-07-31' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Fix a possible null-ptr-deref sometimes triggered by iptables-restore at boot time. Register iptables {ipv4,ipv6} nat table pernet in first place to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima. netfilter pull request 24-07-31 * tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). ==================== Link: https://patch.msgid.link/20240731213046.6194-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-01ipv6: fix ndisc_is_useropt() handling for PIOMaciej Żenczykowski
The current logic only works if the PIO is between two other ND user options. This fixes it so that the PIO can also be either before or after other ND user options (for example the first or last option in the RA). side note: there's actually Android tests verifying a portion of the old broken behaviour, so: https://android-review.googlesource.com/c/kernel/tests/+/3196704 fixes those up. Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Patrick Rohr <prohr@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Fixes: 048c796beb6e ("ipv6: adjust ndisc_is_useropt() to also return true for PIO") Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-31netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().Kuniyuki Iwashima
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id], but the function is exposed to user space before the entry is allocated via register_pernet_subsys(). Let's call register_pernet_subsys() before xt_register_template(). Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-07-31netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().Kuniyuki Iwashima
We had a report that iptables-restore sometimes triggered null-ptr-deref at boot time. [0] The problem is that iptable_nat_table_init() is exposed to user space before the kernel fully initialises netns. In the small race window, a user could call iptable_nat_table_init() that accesses net_generic(net, iptable_nat_net_id), which is available only after registering iptable_nat_net_ops. Let's call register_pernet_subsys() before xt_register_template(). [0]: bpfilter: Loaded bpfilter_umh pid 11702 Started bpfilter BUG: kernel NULL pointer dereference, address: 0000000000000013 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page PGD 0 P4D 0 PREEMPT SMP NOPTI CPU: 2 PID: 11879 Comm: iptables-restor Not tainted 6.1.92-99.174.amzn2023.x86_64 #1 Hardware name: Amazon EC2 c6i.4xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat Code: 10 4c 89 f6 48 89 ef e8 0b 19 bb ff 41 89 c4 85 c0 75 38 41 83 c7 01 49 83 c6 28 41 83 ff 04 75 dc 48 8b 44 24 08 48 8b 0c 24 <48> 89 08 4c 89 ef e8 a2 3b a2 cf 48 83 c4 10 44 89 e0 5b 5d 41 5c RSP: 0018:ffffbef902843cd0 EFLAGS: 00010246 RAX: 0000000000000013 RBX: ffff9f4b052caa20 RCX: ffff9f4b20988d80 RDX: 0000000000000000 RSI: 0000000000000064 RDI: ffffffffc04201c0 RBP: ffff9f4b29394000 R08: ffff9f4b07f77258 R09: ffff9f4b07f77240 R10: 0000000000000000 R11: ffff9f4b09635388 R12: 0000000000000000 R13: ffff9f4b1a3c6c00 R14: ffff9f4b20988e20 R15: 0000000000000004 FS: 00007f6284340000(0000) GS:ffff9f51fe280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000013 CR3: 00000001d10a6005 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? xt_find_table_lock (net/netfilter/x_tables.c:1259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? page_fault_oops (arch/x86/mm/fault.c:727) ? exc_page_fault (./arch/x86/include/asm/irqflags.h:40 ./arch/x86/include/asm/irqflags.h:75 arch/x86/mm/fault.c:1470 arch/x86/mm/fault.c:1518) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:570) ? iptable_nat_table_init (net/ipv4/netfilter/iptable_nat.c:87 net/ipv4/netfilter/iptable_nat.c:121) iptable_nat xt_find_table_lock (net/netfilter/x_tables.c:1259) xt_request_find_table_lock (net/netfilter/x_tables.c:1287) get_info (net/ipv4/netfilter/ip_tables.c:965) ? security_capable (security/security.c:809 (discriminator 13)) ? ns_capable (kernel/capability.c:376 kernel/capability.c:397) ? do_ipt_get_ctl (net/ipv4/netfilter/ip_tables.c:1656) ? bpfilter_send_req (net/bpfilter/bpfilter_kern.c:52) bpfilter nf_getsockopt (net/netfilter/nf_sockopt.c:116) ip_getsockopt (net/ipv4/ip_sockglue.c:1827) __sys_getsockopt (net/socket.c:2327) __x64_sys_getsockopt (net/socket.c:2342 net/socket.c:2339 net/socket.c:2339) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:81) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) RIP: 0033:0x7f62844685ee Code: 48 8b 0d 45 28 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 09 RSP: 002b:00007ffd1f83d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00007ffd1f83d680 RCX: 00007f62844685ee RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 0000000000000004 R08: 00007ffd1f83d670 R09: 0000558798ffa2a0 R10: 00007ffd1f83d680 R11: 0000000000000246 R12: 00007ffd1f83e3b2 R13: 00007f628455baa0 R14: 00007ffd1f83d7b0 R15: 00007f628457a008 </TASK> Modules linked in: iptable_nat(+) bpfilter rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache veth xt_state xt_connmark xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 vfat fat ghash_clmulni_intel aesni_intel ena crypto_simd ptp cryptd i8042 pps_core serio button sunrpc sch_fq_codel configfs loop dm_mod fuse dax dmi_sysfs crc32_pclmul crc32c_intel efivarfs CR2: 0000000000000013 Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Takahiro Kawahara <takawaha@amazon.co.jp> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-07-30net: drop bad gso csum_start and offset in virtio_net_hdrWillem de Bruijn
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871 Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org Fixes: e269d79c7d35 ("net: missing check virtio") Cc: stable@vger.kernel.org Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net/iucv: fix use after free in iucv_sock_close()Alexandra Winter
iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/ Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely") Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30net/smc: prevent UAF in inet_create()D. Wythe
Following syzbot repro crashes the kernel: socketpair(0x2, 0x1, 0x100, &(0x7f0000000140)) (fail_nth: 13) Fix this by not calling sk_common_release() from smc_create_clcsk(). Stack trace: socket: no more sockets ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5092 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 5092 Comm: syz-executor424 Not tainted 6.10.0-syzkaller-04483-g0be9ae5486cd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Code: 80 f3 1f 8c e8 e7 69 a8 fc 90 0f 0b 90 90 eb 99 e8 cb 4f e6 fc c6 05 8a 8d e8 0a 01 90 48 c7 c7 e0 f3 1f 8c e8 c7 69 a8 fc 90 <0f> 0b 90 90 e9 76 ff ff ff e8 a8 4f e6 fc c6 05 64 8d e8 0a 01 90 RSP: 0018:ffffc900034cfcf0 EFLAGS: 00010246 RAX: 3b9fcde1c862f700 RBX: ffff888022918b80 RCX: ffff88807b39bc00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000003 R08: ffffffff815878a2 R09: fffffbfff1c39d94 R10: dffffc0000000000 R11: fffffbfff1c39d94 R12: 00000000ffffffe9 R13: 1ffff11004523165 R14: ffff888022918b28 R15: ffff888022918b00 FS: 00005555870e7380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000007582e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> inet_create+0xbaf/0xe70 __sock_create+0x490/0x920 net/socket.c:1571 sock_create net/socket.c:1622 [inline] __sys_socketpair+0x2ca/0x720 net/socket.c:1769 __do_sys_socketpair net/socket.c:1822 [inline] __se_sys_socketpair net/socket.c:1819 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbcb9259669 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 a1 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffe931c6d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 00007fffe931c6f0 RCX: 00007fbcb9259669 RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000002 RBP: 0000000000000002 R08: 00007fffe931c476 R09: 00000000000000a0 R10: 0000000020000140 R11: 0000000000000246 R12: 00007fffe931c6ec R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK> Link: https://lore.kernel.org/r/20240723175809.537291-1-edumazet@google.com/ Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/1722224415-30999-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: fix backup support in signal endpointsMatthieu Baerts (NGI0)
There was a support for signal endpoints, but only when the endpoint's flag was changed during a connection. If an endpoint with the signal and backup was already present, the MP_JOIN reply was not containing the backup flag as expected. That's confusing to have this inconsistent behaviour. On the other hand, the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was already there, it was just never set before. Now when requesting the local ID from the path-manager, the backup status is also requested. Note that when the userspace PM is used, the backup flag can be set if the local address was already used before with a backup flag, e.g. if the address was announced with the 'backup' flag, or a subflow was created with the 'backup' flag. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: mib: count MPJ with backup flagMatthieu Baerts (NGI0)
Without such counters, it is difficult to easily debug issues with MPJ not having the backup flags on production servers. This is not strictly a fix, but it eases to validate the following patches without requiring to take packet traces, to query ongoing connections with Netlink with admin permissions, or to guess by looking at the behaviour of the packet scheduler. Also, the modification is self contained, isolated, well controlled, and the increments are done just after others, there from the beginning. It looks then safe, and helpful to backport this. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: only set request_bkup flag when sending MP_PRIOMatthieu Baerts (NGI0)
The 'backup' flag from mptcp_subflow_context structure is supposed to be set only when the other peer flagged a subflow as backup, not the opposite. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: distinguish rcv vs sent backup flag in requestsMatthieu Baerts (NGI0)
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow as 'backup' by setting the flag with the same name. Before this patch, the backup was set if the other peer set it in its MP_JOIN + SYN request. It is not correct: the backup flag should be set in the MPJ+SYN+ACK only if the host asks for it, and not mirroring what was done by the other peer. It is then required to have a dedicated bit for each direction, similar to what is done in the subflow context. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: sched: check both directions for backupMatthieu Baerts (NGI0)
The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Before this patch, the scheduler was only looking at the 'backup' flag. That can make sense in some cases, but it looks like that's not what we wanted for the general use, because either the path-manager was setting both of them when sending an MP_PRIO, or the receiver was duplicating the 'backup' flag in the subflow request. Note that the use of these two flags in the path-manager are going to be fixed in the next commits, but this change here is needed not to modify the behaviour. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-29mptcp: fix NL PM announced address accountingPaolo Abeni
Currently the per connection announced address counter is never decreased. As a consequence, after connection establishment, if the NL PM deletes an endpoint and adds a new/different one, no additional subflow is created for the new endpoint even if the current limits allow that. Address the issue properly updating the signaled address counter every time the NL PM removes such addresses. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29mptcp: fix user-space PM announced address accountingPaolo Abeni
Currently the per-connection announced address counter is never decreased. When the user-space PM is in use, this just affect the information exposed via diag/sockopt, but it could still foul the PM to wrong decision. Add the missing accounting for the user-space PM's sake. Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29rtnetlink: Don't ignore IFLA_TARGET_NETNSID when ifname is specified in ↵Kuniyuki Iwashima
rtnl_dellink(). The cited commit accidentally replaced tgt_net with net in rtnl_dellink(). As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified with IFLA_IFNAME or IFLA_ALT_IFNAME. Let's pass tgt_net to rtnl_dev_get(). Fixes: cc6090e985d7 ("net: rtnetlink: introduce helper to get net_device instance by ifname") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tcp: Adjust clamping window for applications specifying SO_RCVBUFSubash Abhinov Kasiviswanathan
tp->scaling_ratio is not updated based on skb->len/skb->truesize once SO_RCVBUF is set leading to the maximum window scaling to be 25% of rcvbuf after commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") and 50% of rcvbuf after commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"). 50% tries to emulate the behavior of older kernels using sysctl_tcp_adv_win_scale with default value. Systems which were using a different values of sysctl_tcp_adv_win_scale in older kernels ended up seeing reduced download speeds in certain cases as covered in https://lists.openwall.net/netdev/2024/05/15/13 While the sysctl scheme is no longer acceptable, the value of 50% is a bit conservative when the skb->len/skb->truesize ratio is later determined to be ~0.66. Applications not specifying SO_RCVBUF update the window scaling and the receiver buffer every time data is copied to userspace. This computation is now used for applications setting SO_RCVBUF to update the maximum window scaling while ensuring that the receive buffer is within the application specified limit. Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix the state of additional contexts with old APIJakub Kicinski
We expect drivers implementing the new create/modify/destroy API to populate the defaults in struct ethtool_rxfh_context. In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key are NULL so drivers can't give us defaults even if they want to. Call get_rxfh() to fetch the values. We can reuse rxfh_dev for the get_rxfh(), rxfh stores the input from the user. This fixes IOCTL reporting 0s instead of the default key / indir table for drivers using legacy API. Add a check to try to catch drivers using the new API but not populating the key. Fixes: 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix setting key and resetting indir at onceJakub Kicinski
The indirection table and the key follow struct ethtool_rxfh in user memory. To reset the indirection table user space calls SET_RXFH with table of size 0 (OTOH to say "no change" it should use -1 / ~0). The logic for calculating the offset where they key sits is incorrect in this case, as kernel would still offset by the full table length, while for the reset there is no indir table and key is immediately after the struct. $ ethtool -X eth0 default hkey 01:02:03... $ ethtool -x eth0 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 [...] Fixes: 3de0b592394d ("ethtool: Support for configurable RSS hash key") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tun: Add missing bpf_net_ctx_clear() in do_xdp_generic()Jeongjun Park
There are cases where do_xdp_generic returns bpf_net_context without clearing it. This causes various memory corruptions, so the missing bpf_net_ctx_clear must be added. Reported-by: syzbot+44623300f057a28baf1e@syzkaller.appspotmail.com Fixes: fecef4cd42c6 ("tun: Assign missing bpf_net_context.") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reported-by: syzbot+3c2b6d5d4bec3b904933@syzkaller.appspotmail.com Reported-by: syzbot+707d98c8649695eaf329@syzkaller.appspotmail.com Reported-by: syzbot+c226757eb784a9da3e8b@syzkaller.appspotmail.com Reported-by: syzbot+61a1cfc2b6632363d319@syzkaller.appspotmail.com Reported-by: syzbot+709e4c85c904bcd62735@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-28minmax: add a few more MIN_T/MAX_T usersLinus Torvalds
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-26Merge tag 'for-net-2024-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix kernel crash when entering btmtk_usb_suspend - btmtk: Fix btmtk.c undefined reference build error - btintel: Fail setup on error - hci_sync: Fix suspending with wrong filter policy - hci_event: Fix setting DISCOVERY_FINDING for passive scanning * tag 'for-net-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning Bluetooth: btmtk: remove #ifdef around declarations Bluetooth: btmtk: Fix btmtk.c undefined reference build error harder Bluetooth: btmtk: Fix btmtk.c undefined reference build error Bluetooth: hci_sync: Fix suspending with wrong filter policy Bluetooth: btmtk: Fix kernel crash when entering btmtk_usb_suspend Bluetooth: btintel: Fail setup on error ==================== Link: https://patch.msgid.link/20240726150502.3300832-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Merge tag 'wireless-2024-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Couple of more urgent fixes: * ath12k: wowlan loop iteration issue * ath12k: fix soft lockup on suspend in certain scenarios * mt76: fix crash when removing an interface * mac80211: fix injection crash with some drivers that don't want monitor vif * cfg80211: fix S1G beacon parsing in scan * cfg80211: fix MLO link status reporting on connect * tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath12k: fix soft lockup on suspend wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() wifi: cfg80211: correct S1G beacon length calculation wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done wifi: mac80211: use monitor sdata with driver only if desired ==================== Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanningLuiz Augusto von Dentz
DISCOVERY_FINDING shall only be set for active scanning as passive scanning is not meant to generate MGMT Device Found events causing discovering state to go out of sync since userspace would believe it is discovering when in fact it is just passive scanning. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1ba38 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26Bluetooth: hci_sync: Fix suspending with wrong filter policyLuiz Augusto von Dentz
When suspending the scan filter policy cannot be 0x00 (no acceptlist) since that means the host has to process every advertisement report waking up the system, so this attempts to check if hdev is marked as suspended and if the resulting filter policy would be 0x00 (no acceptlist) then skip passive scanning if thre no devices in the acceptlist otherwise reset the filter policy to 0x01 so the acceptlist is used since the devices programmed there can still wakeup be system. Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26wifi: cfg80211: correct S1G beacon length calculationJohannes Berg
The minimum header length calculation (equivalent to the start of the elements) for the S1G long beacon erroneously required only up to the start of u.s1g_beacon rather than the start of u.s1g_beacon.variable. Fix that, and also shuffle the branches around a bit to not assign useless values that are overwritten later. Reported-by: syzbot+0f3afa93b91202f21939@syzkaller.appspotmail.com Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Link: https://patch.msgid.link/20240724132912.9662972db7c1.I8779675b5bbda4994cc66f876b6b87a2361c3c0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_doneVeerendranath Jakkam
Individual MLO links connection status is not copied to EVENT_CONNECT_RESULT data while processing the connect response information in cfg80211_connect_done(). Due to this failed links are wrongly indicated with success status in EVENT_CONNECT_RESULT. To fix this, copy the individual MLO links status to the EVENT_CONNECT_RESULT data. Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com [commit message editorial changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: mac80211: use monitor sdata with driver only if desiredJohannes Berg
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by: ZeroBeat <ZeroBeat@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086 Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26sched: act_ct: take care of padding in struct zones_ht_keyEric Dumazet
Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 Fixes: 88c67aeb1407 ("sched: act_ct: add netns into the key of tcf_ct_flow_table") Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-25ethtool: rss: echo the context number backJakub Kicinski
The response to a GET request in Netlink should fully identify the queried object. RSS_GET accepts context id as an input, so it must echo that attribute back to the response. After (assuming context 1 has been created): $ ./cli.py --spec netlink/specs/ethtool.yaml \ --do rss-get \ --json '{"header": {"dev-index": 2}, "context": 1}' {'context': 1, 'header': {'dev-index': 2, 'dev-name': 'eth0'}, [...] Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25Merge tag 'net-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. A lot of networking people were at a conference last week, busy catching COVID, so relatively short PR. Current release - regressions: - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP Current release - new code bugs: - l2tp: protect session IDR and tunnel session list with one lock, make sure the state is coherent to avoid a warning - eth: bnxt_en: update xdp_rxq_info in queue restart logic - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field Previous releases - regressions: - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len, the field reuses previously un-validated pad Previous releases - always broken: - tap/tun: drop short frames to prevent crashes later in the stack - eth: ice: add a per-VF limit on number of FDIR filters - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash" * tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) tun: add missing verification for short frame tap: add missing verification for short frame mISDN: Fix a use after free in hfcmulti_tx() gve: Fix an edge case for TSO skb validity check bnxt_en: update xdp_rxq_info in queue restart logic tcp: process the 3rd ACK with sk_socket for TFO/MPTCP selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling MAINTAINERS: make Breno the netconsole maintainer MAINTAINERS: Update bonding entry net: nexthop: Initialize all fields in dumped nexthops net: stmmac: Correct byte order of perfect_match selftests: forwarding: skip if kernel not support setting bridge fdb learning limit tipc: Return non-zero value from tipc_udp_addr2str() on error netfilter: nft_set_pipapo_avx2: disable softinterrupts ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters net: bonding: correctly annotate RCU in bond_should_notify_peers() ...