summaryrefslogtreecommitdiff
path: root/kernel/cpu.c
AgeCommit message (Collapse)Author
2022-12-02cpu/hotplug: Do not bail-out in DYING/STARTING sectionsVincent Donnefort
The DYING/STARTING callbacks are not expected to fail. However, as reported by Derek, buggy drivers such as tboot are still free to return errors within those sections, which halts the hot(un)plug and leaves the CPU in an unrecoverable state. As there is no rollback possible, only log the failures and proceed with the following steps. This restores the hotplug behaviour prior to commit 453e41085183 ("cpu/hotplug: Add cpuhp_invoke_callback_range()") Fixes: 453e41085183 ("cpu/hotplug: Add cpuhp_invoke_callback_range()") Reported-by: Derek Dolney <z23@posteo.net> Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Derek Dolney <z23@posteo.net> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215867 Link: https://lore.kernel.org/r/20220927101259.1149636-1-vdonnefort@google.com
2022-12-02cpu/hotplug: Set cpuhp target for boot cpuPhil Auld
Since the boot cpu does not go through the hotplug process it ends up with state == CPUHP_ONLINE but target == CPUHP_OFFLINE. So set the target to match in boot_cpu_hotplug_init(). Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20221117162329.3164999-3-pauld@redhat.com
2022-12-02cpu/hotplug: Make target_store() a nop when target == statePhil Auld
Writing the current state back in hotplug/target calls cpu_down() which will set cpu dying even when it isn't and then nothing will ever clear it. A stress test that reads values and writes them back for all cpu device files in sysfs will trigger the BUG() in select_fallback_rq once all cpus are marked as dying. kernel/cpu.c::target_store() ... if (st->state < target) ret = cpu_up(dev->id, target); else ret = cpu_down(dev->id, target); cpu_down() -> cpu_set_state() bool bringup = st->state < target; ... if (cpu_dying(cpu) != !bringup) set_cpu_dying(cpu, !bringup); Fix this by letting state==target fall through in the target_store() conditional. Also make sure st->target == target in that case. Fixes: 757c989b9994 ("cpu/hotplug: Make target state writeable") Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Valentin Schneider <vschneid@redhat.com> Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
2022-05-23Merge tag 'x86_tdx_for_v5.19_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Intel TDX support from Borislav Petkov: "Intel Trust Domain Extensions (TDX) support. This is the Intel version of a confidential computing solution called Trust Domain Extensions (TDX). This series adds support to run the kernel as part of a TDX guest. It provides similar guest protections to AMD's SEV-SNP like guest memory and register state encryption, memory integrity protection and a lot more. Design-wise, it differs from AMD's solution considerably: it uses a software module which runs in a special CPU mode called (Secure Arbitration Mode) SEAM. As the name suggests, this module serves as sort of an arbiter which the confidential guest calls for services it needs during its lifetime. Just like AMD's SNP set, this series reworks and streamlines certain parts of x86 arch code so that this feature can be properly accomodated" * tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) x86/tdx: Fix RETs in TDX asm x86/tdx: Annotate a noreturn function x86/mm: Fix spacing within memory encryption features message x86/kaslr: Fix build warning in KASLR code in boot stub Documentation/x86: Document TDX kernel architecture ACPICA: Avoid cache flush inside virtual machines x86/tdx/ioapic: Add shared bit for IOAPIC base address x86/mm: Make DMA memory shared for TD guest x86/mm/cpa: Add support for TDX shared memory x86/tdx: Make pages shared in ioremap() x86/topology: Disable CPU online/offline control for TDX guests x86/boot: Avoid #VE during boot for TDX platforms x86/boot: Set CR0.NE early and keep it set during the boot x86/acpi/x86/boot: Add multiprocessor wake-up support x86/boot: Add a trampoline for booting APs via firmware handoff x86/tdx: Wire up KVM hypercalls x86/tdx: Port I/O: Add early boot support x86/tdx: Port I/O: Add runtime hypercalls x86/boot: Port I/O: Add decompression-time support for TDX x86/boot: Port I/O: Allow to hook up alternative helpers ...
2022-04-13cpu/hotplug: Initialise all cpuhp_cpu_state structs earlierSteven Price
Rather than waiting until a CPU is first brought online, do the initialisation of the cpuhp_cpu_state structure for each CPU during the __init phase. This saves a (small) amount of non-__init memory and avoids potential confusion about when the cpuhp_cpu_state struct is valid. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220411152233.474129-3-steven.price@arm.com
2022-04-13cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_stateSteven Price
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in cpuhp_create() is too late as it is used earlier in _cpu_up(). If kzalloc_node() in __smpboot_create_thread() fails then the rollback will be done with st->cpu==0 causing CPU0 to be erroneously set to be dying, causing the scheduler to get mightily confused and throw its toys out of the pram. However the cpu number is actually available directly, so simply remove the 'cpu' member and avoid the problem in the first place. Fixes: 2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com
2022-04-07x86/topology: Disable CPU online/offline control for TDX guestsKuppuswamy Sathyanarayanan
Unlike regular VMs, TDX guests use the firmware hand-off wakeup method to wake up the APs during the boot process. This wakeup model uses a mailbox to communicate with firmware to bring up the APs. As per the design, this mailbox can only be used once for the given AP, which means after the APs are booted, the same mailbox cannot be used to offline/online the given AP. More details about this requirement can be found in Intel TDX Virtual Firmware Design Guide, sec titled "AP initialization in OS" and in sec titled "Hotplug Device". Since the architecture does not support any method of offlining the CPUs, disable CPU hotplug support in the kernel. Since this hotplug disable feature can be re-used by other VM guests, add a new CC attribute CC_ATTR_HOTPLUG_DISABLED and use it to disable the hotplug support. Attempt to offline CPU will fail with -EOPNOTSUPP. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20220405232939.73860-25-kirill.shutemov@linux.intel.com
2022-03-22Merge tag 'sched-core-2022-03-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Cleanups for SCHED_DEADLINE - Tracing updates/fixes - CPU Accounting fixes - First wave of changes to optimize the overhead of the scheduler build, from the fast-headers tree - including placeholder *_api.h headers for later header split-ups. - Preempt-dynamic using static_branch() for ARM64 - Isolation housekeeping mask rework; preperatory for further changes - NUMA-balancing: deal with CPU-less nodes - NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD) - Updates to RSEQ UAPI in preparation for glibc usage - Lots of RSEQ/selftests, for same - Add Suren as PSI co-maintainer * tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) sched/headers: ARM needs asm/paravirt_api_clock.h too sched/numa: Fix boot crash on arm64 systems headers/prep: Fix header to build standalone: <linux/psi.h> sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y cgroup: Fix suspicious rcu_dereference_check() usage warning sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity() sched/deadline,rt: Remove unused functions for !CONFIG_SMP sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy() sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file sched/deadline: Remove unused def_dl_bandwidth sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE sched/tracing: Don't re-read p->state when emitting sched_switch event sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race sched/cpuacct: Remove redundant RCU read lock sched/cpuacct: Optimize away RCU read lock sched/cpuacct: Fix charge percpu cpuusage sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies ...
2022-02-21random: clear fast pool, crng, and batches in cpuhp bring upJason A. Donenfeld
For the irq randomness fast pool, rather than having to use expensive atomics, which were visibly the most expensive thing in the entire irq handler, simply take care of the extreme edge case of resetting count to zero in the cpuhp online handler, just after workqueues have been reenabled. This simplifies the code a bit and lets us use vanilla variables rather than atomics, and performance should be improved. As well, very early on when the CPU comes up, while interrupts are still disabled, we clear out the per-cpu crng and its batches, so that it always starts with fresh randomness. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-02-16sched/isolation: Use single feature type while referring to housekeeping cpumaskFrederic Weisbecker
Refer to housekeeping APIs using single feature types instead of flags. This prevents from passing multiple isolation features at once to housekeeping interfaces, which soon won't be possible anymore as each isolation features will have their own cpumask. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Reviewed-by: Phil Auld <pauld@redhat.com> Link: https://lore.kernel.org/r/20220207155910.527133-5-frederic@kernel.org
2021-11-24sched/scs: Reset task stack state in bringup_cpu()Mark Rutland
To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done Fixes: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Tested-by: Qian Cai <quic_qiancai@quicinc.com> Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
2021-08-10cpu/hotplug: Add debug printks for hotplug callback failuresDongli Zhang
CPU hotplug callbacks can fail and cause a rollback to the previous state. These failures are silent and therefore hard to debug. Add pr_debug() to the up and down paths which provide information about the error code, the CPU and the failed state. The debug printks can be enabled via kernel command line or sysfs. [ tglx: Adopt to current mainline, massage printk and changelog ] Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Qais Yousef <qais.yousef@arm.com> Link: https://lore.kernel.org/r/20210409055316.1709-1-dongli.zhang@oracle.com
2021-08-10cpu/hotplug: Use DEVICE_ATTR_*() macroYueHaibing
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210527141105.2312-1-yuehaibing@huawei.com
2021-08-10cpu/hotplug: Eliminate all kernel-doc warningsRandy Dunlap
kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state ' kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step ' kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * cpuhp_invoke_callback _ Invoke the callbacks for a given state kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state' kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state' kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step' kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step' kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback' kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down' kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up' kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
2021-08-10cpu/hotplug: Fix kernel doc warnings for __cpuhp_setup_state_cpuslocked()Baokun Li
Fixes the following W=1 kernel build warning(s): kernel/cpu.c:1949: warning: Function parameter or member 'name' not described in '__cpuhp_setup_state_cpuslocked' Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210605063003.681049-1-libaokun1@huawei.com
2021-06-29Merge tag 'smp-urgent-2021-06-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Thomas Gleixner: "A fix for the CPU hotplug and cpusets interaction: cpusets delegate the hotplug work to a workqueue to prevent a lock order inversion vs. the CPU hotplug lock. The work is not flushed before the hotplug operation returns which creates user visible inconsistent state. Prevent this by flushing the work after dropping CPU hotplug lock and before releasing the outer mutex which serializes the CPU hotplug related sysfs interface operations" * tag 'smp-urgent-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Cure the cpusets trainwreck
2021-06-21cpu/hotplug: Cure the cpusets trainwreckThomas Gleixner
Alexey and Joshua tried to solve a cpusets related hotplug problem which is user space visible and results in unexpected behaviour for some time after a CPU has been plugged in and the corresponding uevent was delivered. cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a workqueue. This is done because the cpusets code has already a lock nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or waiting for the work to finish with cpu_hotplug_lock held can and will deadlock because that results in the reverse lock order. As a consequence the uevent can be delivered before cpusets have consistent state which means that a user space invocation of sched_setaffinity() to move a task to the plugged CPU fails up to the point where the scheduled work has been processed. The same is true for CPU unplug, but that does not create user observable failure (yet). It's still inconsistent to claim that an operation is finished before it actually is and that's the real issue at hand. uevents just make it reliably observable. Obviously the problem should be fixed in cpusets/cgroups, but untangling that is pretty much impossible because according to the changelog of the commit which introduced this 8 years ago: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and the whole code is built around that. So bite the bullet and invoke the relevant cpuset function, which waits for the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and only when tasks are not frozen by suspend/hibernate because that would obviously wait forever. Waiting there with cpu_add_remove_lock, which is protecting the present and possible CPU maps, held is not a problem at all because neither work queues nor cpusets/cgroups have any lockchains related to that lock. Waiting in the hotplug machinery is not problematic either because there are already state callbacks which wait for hardware queues to drain. It makes the operations slightly slower, but hotplug is slow anyway. This ensures that state is consistent before returning from a hotplug up/down operation. It's still inconsistent during the operation, but that's a different story. Add a large comment which explains why this is done and why this is not a dump ground for the hack of the day to work around half thought out locking schemes. Document also the implications vs. hotplug operations and serialization or the lack of it. Thanks to Alexy and Joshua for analyzing why this temporary sched_setaffinity() failure happened. Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()") Reported-by: Alexey Klimov <aklimov@redhat.com> Reported-by: Joshua Baker <jobaker@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexey Klimov <aklimov@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
2021-05-25cpu/hotplug: Simplify access to percpu cpuhp_stateYuan ZhaoXiong
It is unnecessary to invoke per_cpu_ptr() everytime to access cpuhp_state. Use the available pointer instead. Signed-off-by: Yuan ZhaoXiong <yuanzhaoxiong@baidu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/1621776690-13264-1-git-send-email-yuanzhaoxiong@baidu.com
2021-04-21cpumask/hotplug: Fix cpu_dying() state trackingPeter Zijlstra
Vincent reported that for states with a NULL startup/teardown function we do not call cpuhp_invoke_callback() (because there is none) and as such we'll not update the cpu_dying() state. The stale cpu_dying() can eventually lead to triggering BUG(). Rectify this by updating cpu_dying() in the exact same places the hotplug machinery tracks its directional state, namely cpuhp_set_state() and cpuhp_reset_state(). Reported-by: Vincent Donnefort <vincent.donnefort@arm.com> Suggested-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/YH7r+AoQEReSvxBI@hirez.programming.kicks-ass.net
2021-04-16cpumask: Introduce DYING maskPeter Zijlstra
Introduce a cpumask that indicates (for each CPU) what direction the CPU hotplug is currently going. Notably, it tracks rollbacks. Eg. when an up fails and we do a roll-back down, it will accurately reflect the direction. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20210310150109.151441252@infradead.org
2021-03-06cpu/hotplug: Add cpuhp_invoke_callback_range()Vincent Donnefort
Factorizing and unifying cpuhp callback range invocations, especially for the hotunplug path, where two different ways of decrementing were used. The first one, decrements before the callback is called: cpuhp_thread_fun() state = st->state; st->state--; cpuhp_invoke_callback(state); The second one, after: take_down_cpu()|cpuhp_down_callbacks() cpuhp_invoke_callback(st->state); st->state--; This is problematic for rolling back the steps in case of error, as depending on the decrement, the rollback will start from N or N-1. It also makes tracing inconsistent, between steps run in the cpuhp thread and the others. Additionally, avoid useless cpuhp_thread_fun() loops by skipping empty steps. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210216103506.416286-4-vincent.donnefort@arm.com
2021-03-06cpu/hotplug: CPUHP_BRINGUP_CPU failure exceptionVincent Donnefort
The atomic states (between CPUHP_AP_IDLE_DEAD and CPUHP_AP_ONLINE) are triggered by the CPUHP_BRINGUP_CPU step. If the latter fails, no atomic state can be rolled back. DEAD callbacks too can't fail and disallow recovery. As a consequence, during hotunplug, the fail injection interface should prohibit all states from CPUHP_BRINGUP_CPU to CPUHP_ONLINE. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210216103506.416286-3-vincent.donnefort@arm.com
2021-03-06cpu/hotplug: Allowing to reset fail injectionVincent Donnefort
Currently, the only way of resetting the fail injection is to trigger a hotplug, hotunplug or both. This is rather annoying for testing and, as the default value for this file is -1, it seems pretty natural to let a user write it. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210216103506.416286-2-vincent.donnefort@arm.com
2021-01-06cpu/hotplug: Add lockdep_is_cpus_held()Frederic Weisbecker
This commit adds a lockdep_is_cpus_held() function to verify that the proper locks are held and that various operations are running in the correct context. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-12-14Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-11-27kernel/cpu: add arch override for clear_tasks_mm_cpumask() mm handlingNicholas Piggin
powerpc/64s keeps a counter in the mm which counts bits set in mm_cpumask as well as other things. This means it can't use generic code to clear bits out of the mask and doesn't adjust the arch specific counter. Add an arch override that allows powerpc/64s to use clear_tasks_mm_cpumask(). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
2020-11-10sched/hotplug: Consolidate task migration on CPU unplugThomas Gleixner
With the new mechanism which kicks tasks off the outgoing CPU at the end of schedule() the situation on an outgoing CPU right before the stopper thread brings it down completely is: - All user tasks and all unbound kernel threads have either been migrated away or are not running and the next wakeup will move them to a online CPU. - All per CPU kernel threads, except cpu hotplug thread and the stopper thread have either been unbound or parked by the responsible CPU hotplug callback. That means that at the last step before the stopper thread is invoked the cpu hotplug thread is the last legitimate running task on the outgoing CPU. Add a final wait step right before the stopper thread is kicked which ensures that any still running tasks on the way to park or on the way to kick themself of the CPU are either sleeping or gone. This allows to remove the migrate_tasks() crutch in sched_cpu_dying(). If sched_cpu_dying() detects that there is still another running task aside of the stopper thread then it will explode with the appropriate fireworks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Link: https://lkml.kernel.org/r/20201023102346.547163969@infradead.org
2020-06-03Merge tag 'sched-core-2020-06-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The changes in this cycle are: - Optimize the task wakeup CPU selection logic, to improve scalability and reduce wakeup latency spikes - PELT enhancements - CFS bandwidth handling fixes - Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending - Optimize IPI cross-calls by making flush_smp_call_function_queue() process sync callbacks first. - Misc fixes and enhancements" * tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too sched/headers: Split out open-coded prototypes into kernel/sched/smp.h sched: Replace rq::wake_list sched: Add rq::ttwu_pending irq_work, smp: Allow irq_work on call_single_queue smp: Optimize send_call_function_single_ipi() smp: Move irq_work_run() out of flush_smp_call_function_queue() smp: Optimize flush_smp_call_function_queue() sched: Fix smp_call_function_single_async() usage for ILB sched/core: Offload wakee task activation if it the wakee is descheduling sched/core: Optimize ttwu() spinning on p->on_cpu sched: Defend cfs and rt bandwidth quota against overflow sched/cpuacct: Fix charge cpuacct.usage_sys sched/fair: Replace zero-length array with flexible-array sched/pelt: Sync util/runnable_sum with PELT window when propagating sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr() sched/fair: Optimize enqueue_task_fair() sched: Make scheduler_ipi inline sched: Clean up scheduler_ipi() sched/core: Simplify sched_init() ...
2020-05-07cpu/hotplug: Remove __freeze_secondary_cpus()Qais Yousef
The refactored function is no longer required as the codepaths that call freeze_secondary_cpus() are all suspend/resume related now. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20200430114004.17477-2-qais.yousef@arm.com
2020-05-07cpu/hotplug: Remove disable_nonboot_cpus()Qais Yousef
The single user could have called freeze_secondary_cpus() directly. Since this function was a source of confusion, remove it as it's just a pointless wrapper. While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to preserve the naming symmetry. Done automatically via: git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g' Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
2020-04-30sched/core: Fix illegal RCU from offline CPUsPeter Zijlstra
In the CPU-offline process, it calls mmdrop() after idle entry and the subsequent call to cpuhp_report_idle_dead(). Once execution passes the call to rcu_report_dead(), RCU is ignoring the CPU, which results in lockdep complaining when mmdrop() uses RCU from either memcg or debugobjects below. Fix it by cleaning up the active_mm state from BP instead. Every arch which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit() from AP. The only exception is parisc because it switches them to &init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()), but the patch will still work there because it calls mmgrab(&init_mm) in smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu(). WARNING: suspicious RCU usage ----------------------------- kernel/workqueue.c:710 RCU or wq_pool_mutex should be held! other info that might help us debug this: RCU used illegally from offline CPU! Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 get_work_pool+0x110/0x150 __queue_work+0x1bc/0xca0 queue_work_on+0x114/0x120 css_release+0x9c/0xc0 percpu_ref_put_many+0x204/0x230 free_pcp_prepare+0x264/0x570 free_unref_page+0x38/0xf0 __mmdrop+0x21c/0x2c0 idle_task_exit+0x170/0x1b0 pnv_smp_cpu_kill_self+0x38/0x2e0 cpu_die+0x48/0x64 arch_cpu_idle_dead+0x30/0x50 do_idle+0x2f4/0x470 cpu_startup_entry+0x38/0x40 start_secondary+0x7a8/0xa80 start_secondary_resume+0x10/0x14 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
2020-04-27cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted"Ethon Paul
Signed-off-by: Ethon Paul <ethp@qq.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200417164008.6541-1-ethp@qq.com
2020-03-30Merge tag 'smp-core-2020-03-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
2020-03-28cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()Thomas Gleixner
A recent change to freeze_secondary_cpus() which added an early abort if a wakeup is pending missed the fact that the function is also invoked for shutdown, reboot and kexec via disable_nonboot_cpus(). In case of disable_nonboot_cpus() the wakeup event needs to be ignored as the purpose is to terminate the currently running kernel. Add a 'suspend' argument which is only set when the freeze is in context of a suspend operation. If not set then an eventually pending wakeup event is ignored. Fixes: a66d955e910a ("cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending") Reported-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/874kuaxdiz.fsf@nanos.tec.linutronix.de
2020-03-25cpu/hotplug: Hide cpu_up/down()Qais Yousef
Use separate functions for the device core to bring a CPU up and down. Users outside the device core must use add/remove_cpu() which will take care of extra housekeeping work like keeping sysfs in sync. Make cpu_up/down() static and replace the extra layer of indirection. [ tglx: Removed the extra wrapper functions and adjusted function names ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-18-qais.yousef@arm.com
2020-03-25cpu/hotplug: Move bringup of secondary CPUs out of smp_init()Qais Yousef
This is the last direct user of cpu_up() before it can become an internal implementation detail of the cpu subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-17-qais.yousef@arm.com
2020-03-25cpu/hotplug: Provide bringup_hibernate_cpu()Qais Yousef
arm64 uses cpu_up() in the resume from hibernation code to ensure that the CPU on which the system hibernated is online. Provide a core function for this. [ tglx: Split out from the combo arm64 patch ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-9-qais.yousef@arm.com
2020-03-25cpu/hotplug: Create a new function to shutdown nonboot cpusQais Yousef
This function will be used later in machine_shutdown() for some architectures. disable_nonboot_cpus() is not safe to use when doing machine_down(), because it relies on freeze_secondary_cpus() which in turn is a suspend/resume related freeze and could abort if the logic detects any pending activities that can prevent finishing the offlining process. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-3-qais.yousef@arm.com
2020-03-25cpu/hotplug: Add new {add,remove}_cpu() functionsQais Yousef
The new functions use device_{online,offline}() which are userspace safe. This is in preparation to move cpu_{up, down} kernel users to use a safer interface that is not racy with userspace. Suggested-by: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-2-qais.yousef@arm.com
2020-02-11locking/percpu-rwsem, lockdep: Make percpu-rwsem use its own lockdep_mapPeter Zijlstra
As preparation for replacing the embedded rwsem, give percpu-rwsem its own lockdep_map. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Will Deacon <will@kernel.org> Acked-by: Waiman Long <longman@redhat.com> Tested-by: Juri Lelli <juri.lelli@redhat.com> Link: https://lkml.kernel.org/r/20200131151539.927625541@infradead.org
2020-01-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "These were the main changes in this cycle: - More -rt motivated separation of CONFIG_PREEMPT and CONFIG_PREEMPTION. - Add more low level scheduling topology sanity checks and warnings to filter out nonsensical topologies that break scheduling. - Extend uclamp constraints to influence wakeup CPU placement - Make the RT scheduler more aware of asymmetric topologies and CPU capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y - Make idle CPU selection more consistent - Various fixes, smaller cleanups, updates and enhancements - please see the git log for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) sched/fair: Define sched_idle_cpu() only for SMP configurations sched/topology: Assert non-NUMA topology masks don't (partially) overlap idle: fix spelling mistake "iterrupts" -> "interrupts" sched/fair: Remove redundant call to cpufreq_update_util() sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP sched/fair: calculate delta runnable load only when it's needed sched/cputime: move rq parameter in irqtime_account_process_tick stop_machine: Make stop_cpus() static sched/debug: Reset watchdog on all CPUs while processing sysrq-t sched/core: Fix size of rq::uclamp initialization sched/uclamp: Fix a bug in propagating uclamp value in new cgroups sched/fair: Load balance aggressively for SCHED_IDLE CPUs sched/fair : Improve update_sd_pick_busiest for spare capacity case watchdog: Remove soft_lockup_hrtimer_cnt and related code sched/rt: Make RT capacity-aware sched/fair: Make EAS wakeup placement consider uclamp restrictions sched/fair: Make task_fits_capacity() consider uclamp restrictions sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with() sched/uclamp: Make uclamp util helpers use and return UL values ...
2020-01-09cpu/SMT: Fix x86 link error without CONFIG_SYSFSArnd Bergmann
When CONFIG_SYSFS is disabled, but CONFIG_HOTPLUG_SMT is enabled, the kernel fails to link: arch/x86/power/cpu.o: In function `hibernate_resume_nonboot_cpu_disable': (.text+0x38d): undefined reference to `cpuhp_smt_enable' arch/x86/power/hibernate.o: In function `arch_resume_nosmt': hibernate.c:(.text+0x291): undefined reference to `cpuhp_smt_enable' hibernate.c:(.text+0x29c): undefined reference to `cpuhp_smt_disable' Move the exported functions out of the #ifdef section into its own with the correct conditions. The patch that caused this is marked for stable backports, so this one may need to be backported as well. Fixes: ec527c318036 ("x86/power: Fix 'nosmt' vs hibernation triple fault during resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191210195614.786555-1-arnd@arndb.de
2019-12-17cpu/hotplug, stop_machine: Fix stop_machine vs hotplug orderPeter Zijlstra
Paul reported a very sporadic, rcutorture induced, workqueue failure. When the planets align, the workqueue rescuer's self-migrate fails and then triggers a WARN for running a work on the wrong CPU. Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call could be ignored! When stopper->enabled is false, stop_machine will insta complete the work, without actually doing the work. Worse, it will not WARN about this (we really should fix this). It turns out there is a small window where a freshly online'ed CPU is marked 'online' but doesn't yet have the stopper task running: BP AP bringup_cpu() __cpu_up(cpu, idle) --> start_secondary() ... cpu_startup_entry() bringup_wait_for_ap() wait_for_ap_thread() <-- cpuhp_online_idle() while (1) do_idle() ... available to run kthreads ... stop_machine_unpark() stopper->enable = true; Close this by moving the stop_machine_unpark() into cpuhp_online_idle(), such that the stopper thread is ready before we start the idle loop and schedule. Reported-by: "Paul E. McKenney" <paulmck@kernel.org> Debugged-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
2019-11-26Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - A comprehensive rewrite of the robust/PI futex code's exit handling to fix various exit races. (Thomas Gleixner et al) - Rework the generic REFCOUNT_FULL implementation using atomic_fetch_* operations so that the performance impact of the cmpxchg() loops is mitigated for common refcount operations. With these performance improvements the generic implementation of refcount_t should be good enough for everybody - and this got confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and REFCOUNT_FULL entirely, leaving the generic implementation enabled unconditionally. (Will Deacon) - Other misc changes, fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) lkdtm: Remove references to CONFIG_REFCOUNT_FULL locking/refcount: Remove unused 'refcount_error_report()' function locking/refcount: Consolidate implementations of refcount_t locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions locking/refcount: Move saturation warnings out of line locking/refcount: Improve performance of generic REFCOUNT_FULL code locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header locking/refcount: Remove unused refcount_*_checked() variants locking/refcount: Ensure integer operands are treated as signed locking/refcount: Define constants for saturation and max refcount values futex: Prevent exit livelock futex: Provide distinct return value when owner is exiting futex: Add mutex around futex exit futex: Provide state handling for exec() as well futex: Sanitize exit state handling futex: Mark the begin of futex exit explicitly futex: Set task::futex_state to DEAD right after handling futex exit futex: Split futex_mm_release() for exit/exec exit/exec: Seperate mm_release() futex: Replace PF_EXITPIDONE with a state ...
2019-11-04cpu/speculation: Uninline and export CPU mitigations helpersTyler Hicks
A kernel module may need to check the value of the "mitigations=" kernel command line parameter as part of its setup when the module needs to perform software mitigations for a CPU flaw. Uninline and export the helper functions surrounding the cpu_mitigations enum to allow for their usage from a module. Lastly, privatize the enum and cpu_mitigations variable since the value of cpu_mitigations can be checked with the exported helper functions. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-09locking/lockdep: Remove unused @nested argument from lock_release()Qian Cai
Since the following commit: b4adfe8e05f1 ("locking/lockdep: Remove unused argument in __lock_release") @nested is no longer used in lock_release(), so remove it from all lock_release() calls and friends. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: alexander.levin@microsoft.com Cc: daniel@iogearbox.net Cc: davem@davemloft.net Cc: dri-devel@lists.freedesktop.org Cc: duyuyang@gmail.com Cc: gregkh@linuxfoundation.org Cc: hannes@cmpxchg.org Cc: intel-gfx@lists.freedesktop.org Cc: jack@suse.com Cc: jlbec@evilplan.or Cc: joonas.lahtinen@linux.intel.com Cc: joseph.qi@linux.alibaba.com Cc: jslaby@suse.com Cc: juri.lelli@redhat.com Cc: maarten.lankhorst@linux.intel.com Cc: mark@fasheh.com Cc: mhocko@kernel.org Cc: mripard@kernel.org Cc: ocfs2-devel@oss.oracle.com Cc: rodrigo.vivi@intel.com Cc: sean@poorly.run Cc: st@kernel.org Cc: tj@kernel.org Cc: tytso@mit.edu Cc: vdavydov.dev@gmail.com Cc: vincent.guittot@linaro.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-09-24cpu/SMT: create and export cpu_smt_possible()Vitaly Kuznetsov
KVM needs to know if SMT is theoretically possible, this means it is supported and not forcefully disabled ('nosmt=force'). Create and export cpu_smt_possible() answering this question. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-25cpu/hotplug: Cache number of online CPUsThomas Gleixner
Re-evaluating the bitmap wheight of the online cpus bitmap in every invocation of num_online_cpus() over and over is a pretty useless exercise. Especially when num_online_cpus() is used in code paths like the IPI delivery of x86 or the membarrier code. Cache the number of online CPUs in the core and just return the cached variable. The accessor function provides only a snapshot when used without protection against concurrent CPU hotplug. The storage needs to use an atomic_t because the kexec and reboot code (ab)use set_cpu_online() in their 'shutdown' handlers without any form of serialization as pointed out by Mathieu. Regular CPU hotplug usage is properly serialized. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091622590.1634@nanos.tec.linutronix.de
2019-07-25smp/hotplug: Track booted once CPUs in a cpumaskThomas Gleixner
The booted once information which is required to deal with the MCE broadcast issue on X86 correctly is stored in the per cpu hotplug state, which is perfectly fine for the intended purpose. X86 needs that information for supporting NMI broadcasting via shortcuts, but retrieving it from per cpu data is cumbersome. Move it to a cpumask so the information can be checked against the cpu_present_mask quickly. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190722105219.818822855@linutronix.de
2019-07-08Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug updates from Thomas Gleixner: "A small set of updates for SMP and CPU hotplug: - Abort disabling secondary CPUs in the freezer when a wakeup is pending instead of evaluating it only after all CPUs have been offlined. - Remove the shared annotation for the strict per CPU cfd_data in the smp function call core code. - Remove the return values of smp_call_function() and on_each_cpu() as they are unconditionally 0. Fixup the few callers which actually bothered to check the return value" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Remove smp_call_function() and on_each_cpu() return values smp: Do not mark call_function_data as shared cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()