| Age | Commit message (Collapse) | Author |
|---|
|
Through code analysis, I realized that the ds->untag_bridge_pvid logic
is contradictory - see the newly added FIXME above the kernel-doc for
dsa_software_untag_vlan_unaware_bridge().
Moreover, for the Felix driver, I need something very similar, but which
is actually _not_ contradictory: untag the bridge PVID on RX, but for
VLAN-aware bridges. The existing logic does it for VLAN-unaware bridges.
Since I don't want to change the functionality of drivers which were
supposedly properly tested with the ds->untag_bridge_pvid flag, I have
introduced a new one: ds->untag_vlan_aware_bridge_pvid, and I have
refactored the DSA reception code into a common path for both flags.
TODO: both flags should be unified under a single ds->software_vlan_untag,
which users of both current flags should set. This is not something that
can be carried out right away. It needs very careful examination of all
drivers which make use of this functionality, since some of them
actually get this wrong in the first place.
For example, commit 9130c2d30c17 ("net: dsa: microchip: ksz8795: Use
software untagging on CPU port") uses this in a driver which has
ds->configure_vlan_while_not_filtering = true. The latter mechanism has
been known for many years to be broken by design:
https://lore.kernel.org/netdev/CABumfLzJmXDN_W-8Z=p9KyKUVi_HhS7o_poBkeKHS2BkAiyYpw@mail.gmail.com/
and we have the situation of 2 bugs canceling each other. There is no
private VLAN, and the port follows the PVID of the VLAN-unaware bridge.
So, it's kinda ok for that driver to use the ds->untag_bridge_pvid
mechanism, in a broken way.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add
spinlock for frame transmission from CPU") which is for a similar
hardware design, multiple CPUs can simultaneously perform injection
or extraction. There are only 2 register groups for injection and 2
for extraction, and the driver only uses one of each. So we'd better
serialize access using spin locks, otherwise frame corruption is
possible.
Note that unlike in sparx5, FDMA in ocelot does not have this issue
because struct ocelot_fdma_tx_ring already contains an xmit_lock.
I guess this is mostly a problem for NXP LS1028A, as that is dual core.
I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka
the felix DSA driver) started using register-based packet injection and
extraction.
Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
register injection
Problem description
-------------------
On an NXP LS1028A (felix DSA driver) with the following configuration:
- ocelot-8021q tagging protocol
- VLAN-aware bridge (with STP) spanning at least swp0 and swp1
- 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700
- ptp4l on swp0.700 and swp1.700
we see that the ptp4l instances do not see each other's traffic,
and they all go to the grand master state due to the
ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition.
Jumping to the conclusion for the impatient
-------------------------------------------
There is a zero-day bug in the ocelot switchdev driver in the way it
handles VLAN-tagged packet injection. The correct logic already exists in
the source code, in function ocelot_xmit_get_vlan_info() added by commit
5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit").
But it is used only for normal NPI-based injection with the DSA "ocelot"
tagging protocol. The other injection code paths (register-based and
FDMA-based) roll their own wrong logic. This affects and was noticed on
the DSA "ocelot-8021q" protocol because it uses register-based injection.
By moving ocelot_xmit_get_vlan_info() to a place that's common for both
the DSA tagger and the ocelot switch library, it can also be called from
ocelot_port_inject_frame() in ocelot.c.
We need to touch the lines with ocelot_ifh_port_set()'s prototype
anyway, so let's rename it to something clearer regarding what it does,
and add a kernel-doc. ocelot_ifh_set_basic() should do.
Investigation notes
-------------------
Debugging reveals that PTP event (aka those carrying timestamps, like
Sync) frames injected into swp0.700 (but also swp1.700) hit the wire
with two VLAN tags:
00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc
~~~~~~~~~~~
00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00
~~~~~~~~~~~
00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03
00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00
00000040: 00 00
The second (unexpected) VLAN tag makes felix_check_xtr_pkt() ->
ptp_classify_raw() fail to see these as PTP packets at the link
partner's receiving end, and return PTP_CLASS_NONE (because the BPF
classifier is not written to expect 2 VLAN tags).
The reason why packets have 2 VLAN tags is because the transmission
code treats VLAN incorrectly.
Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX
feature. Therefore, at xmit time, all VLANs should be in the skb head,
and none should be in the hwaccel area. This is done by:
static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb,
netdev_features_t features)
{
if (skb_vlan_tag_present(skb) &&
!vlan_hw_offload_capable(features, skb->vlan_proto))
skb = __vlan_hwaccel_push_inside(skb);
return skb;
}
But ocelot_port_inject_frame() handles things incorrectly:
ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb));
void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op)
{
(...)
if (vlan_tag)
ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
(...)
}
The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head
is by calling:
static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb)
{
skb->vlan_present = 0;
}
which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get().
This means that ocelot, when it calls skb_vlan_tag_get(), sees
(and uses) a residual skb->vlan_tci, while the same VLAN tag is
_already_ in the skb head.
The trivial fix for double VLAN headers is to replace the content of
ocelot_ifh_port_set() with:
if (skb_vlan_tag_present(skb))
ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));
but this would not be correct either, because, as mentioned,
vlan_hw_offload_capable() is false for us, so we'd be inserting dead
code and we'd always transmit packets with VID=0 in the injection frame
header.
I can't actually test the ocelot switchdev driver and rely exclusively
on code inspection, but I don't think traffic from 8021q uppers has ever
been injected properly, and not double-tagged. Thus I'm blaming the
introduction of VLAN fields in the injection header - early driver code.
As hinted at in the early conclusion, what we _want_ to happen for
VLAN transmission was already described once in commit 5ca721c54d86
("net: dsa: tag_ocelot: set the classified VLAN during xmit").
ocelot_xmit_get_vlan_info() intends to ensure that if the port through
which we're transmitting is under a VLAN-aware bridge, the outer VLAN
tag from the skb head is stripped from there and inserted into the
injection frame header (so that the packet is processed in hardware
through that actual VLAN). And in all other cases, the packet is sent
with VID=0 in the injection frame header, since the port is VLAN-unaware
and has logic to strip this VID on egress (making it invisible to the
wire).
Fixes: 08d02364b12f ("net: mscc: fix the injection header")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In several cases we are freeing pages which were not allocated using
common page allocators. For such cases, in order to keep allocation
accounting correct, we should clear the page tag to indicate that the page
being freed is expected to not have a valid allocation tag. Introduce
clear_page_tag_ref() helper function to be used for this.
Link: https://lkml.kernel.org/r/20240813150758.855881-1-surenb@google.com
Fixes: d224eb0287fb ("codetag: debug: mark codetags for reserved pages as empty")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix invalid access to pgdat during hot-remove operation:
ndctl users reported a GPF when trying to destroy a namespace:
$ ndctl destroy-namespace all -r all -f
Segmentation fault
dmesg:
Oops: general protection fault, probably for
non-canonical address 0xdffffc0000005650: 0000 [#1] PREEMPT SMP KASAN
PTI
KASAN: probably user-memory-access in range
[0x000000000002b280-0x000000000002b287]
CPU: 26 UID: 0 PID: 1868 Comm: ndctl Not tainted 6.11.0-rc1 #1
Hardware name: Dell Inc. PowerEdge R640/08HT8T, BIOS
2.20.1 09/13/2023
RIP: 0010:mod_node_page_state+0x2a/0x110
cxl-test users report a GPF when trying to unload the test module:
$ modrpobe -r cxl-test
dmesg
BUG: unable to handle page fault for address: 0000000000004200
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 UID: 0 PID: 1076 Comm: modprobe Tainted: G O N 6.11.0-rc1 #197
Tainted: [O]=OOT_MODULE, [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/15
RIP: 0010:mod_node_page_state+0x6/0x90
Currently, when memory is hot-plugged or hot-removed the accounting is
done based on the assumption that memmap is allocated from the same node
as the hot-plugged/hot-removed memory, which is not always the case.
In addition, there are challenges with keeping the node id of the memory
that is being remove to the time when memmap accounting is actually
performed: since this is done after remove_pfn_range_from_zone(), and
also after remove_memory_block_devices(). Meaning that we cannot use
pgdat nor walking though memblocks to get the nid.
Given all of that, account the memmap overhead system wide instead.
For this we are going to be using global atomic counters, but given that
memmap size is rarely modified, and normally is only modified either
during early boot when there is only one CPU, or under a hotplug global
mutex lock, therefore there is no need for per-cpu optimizations.
Also, while we are here rename nr_memmap to nr_memmap_pages, and
nr_memmap_boot to nr_memmap_boot_pages to be self explanatory that the
units are in page count.
[pasha.tatashin@soleen.com: address a few nits from David Hildenbrand]
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240809191020.1142142-4-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-4-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-cxl/CAHj4cs9Ax1=CoJkgBGP_+sNu6-6=6v=_L-ZBZY0bVLD3wUWZQg@mail.gmail.com
Reported-by: Alison Schofield <alison.schofield@intel.com>
Closes: https://lore.kernel.org/linux-mm/Zq0tPd2h6alFz8XF@aschofie-mobl2/#t
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
/proc/vmstat contains events and stats, events can only grow, but stats
can grow and shrink.
vmstat has the following:
-------------------------
NR_VM_ZONE_STAT_ITEMS: per-zone stats
NR_VM_NUMA_EVENT_ITEMS: per-numa events
NR_VM_NODE_STAT_ITEMS: per-numa stats
NR_VM_WRITEBACK_STAT_ITEMS: system-wide background-writeback and
dirty-throttling tresholds.
NR_VM_EVENT_ITEMS: system-wide events
-------------------------
Rename NR_VM_WRITEBACK_STAT_ITEMS to NR_VM_STAT_ITEMS, to track the
system-wide stats, we are going to add per-page metadata stats to this
category in the next patch.
Also delete unused writeback_stat_name().
Link: https://lkml.kernel.org/r/20240809191020.1142142-2-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240808213437.682006-3-pasha.tatashin@soleen.com
Fixes: 15995a352474 ("mm: report per-page metadata information")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We recently made GUP's common page table walking code to also walk hugetlb
VMAs without most hugetlb special-casing, preparing for the future of
having less hugetlb-specific page table walking code in the codebase.
Turns out that we missed one page table locking detail: page table locking
for hugetlb folios that are not mapped using a single PMD/PUD.
Assume we have hugetlb folio that spans multiple PTEs (e.g., 64 KiB
hugetlb folios on arm64 with 4 KiB base page size). GUP, as it walks the
page tables, will perform a pte_offset_map_lock() to grab the PTE table
lock.
However, hugetlb that concurrently modifies these page tables would
actually grab the mm->page_table_lock: with USE_SPLIT_PTE_PTLOCKS, the
locks would differ. Something similar can happen right now with hugetlb
folios that span multiple PMDs when USE_SPLIT_PMD_PTLOCKS.
This issue can be reproduced [1], for example triggering:
[ 3105.936100] ------------[ cut here ]------------
[ 3105.939323] WARNING: CPU: 31 PID: 2732 at mm/gup.c:142 try_grab_folio+0x11c/0x188
[ 3105.944634] Modules linked in: [...]
[ 3105.974841] CPU: 31 PID: 2732 Comm: reproducer Not tainted 6.10.0-64.eln141.aarch64 #1
[ 3105.980406] Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-4.fc40 05/24/2024
[ 3105.986185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3105.991108] pc : try_grab_folio+0x11c/0x188
[ 3105.994013] lr : follow_page_pte+0xd8/0x430
[ 3105.996986] sp : ffff80008eafb8f0
[ 3105.999346] x29: ffff80008eafb900 x28: ffffffe8d481f380 x27: 00f80001207cff43
[ 3106.004414] x26: 0000000000000001 x25: 0000000000000000 x24: ffff80008eafba48
[ 3106.009520] x23: 0000ffff9372f000 x22: ffff7a54459e2000 x21: ffff7a546c1aa978
[ 3106.014529] x20: ffffffe8d481f3c0 x19: 0000000000610041 x18: 0000000000000001
[ 3106.019506] x17: 0000000000000001 x16: ffffffffffffffff x15: 0000000000000000
[ 3106.024494] x14: ffffb85477fdfe08 x13: 0000ffff9372ffff x12: 0000000000000000
[ 3106.029469] x11: 1fffef4a88a96be1 x10: ffff7a54454b5f0c x9 : ffffb854771b12f0
[ 3106.034324] x8 : 0008000000000000 x7 : ffff7a546c1aa980 x6 : 0008000000000080
[ 3106.038902] x5 : 00000000001207cf x4 : 0000ffff9372f000 x3 : ffffffe8d481f000
[ 3106.043420] x2 : 0000000000610041 x1 : 0000000000000001 x0 : 0000000000000000
[ 3106.047957] Call trace:
[ 3106.049522] try_grab_folio+0x11c/0x188
[ 3106.051996] follow_pmd_mask.constprop.0.isra.0+0x150/0x2e0
[ 3106.055527] follow_page_mask+0x1a0/0x2b8
[ 3106.058118] __get_user_pages+0xf0/0x348
[ 3106.060647] faultin_page_range+0xb0/0x360
[ 3106.063651] do_madvise+0x340/0x598
Let's make huge_pte_lockptr() effectively use the same PT locks as any
core-mm page table walker would. Add ptep_lockptr() to obtain the PTE
page table lock using a pte pointer -- unfortunately we cannot convert
pte_lockptr() because virt_to_page() doesn't work with kmap'ed page tables
we can have with CONFIG_HIGHPTE.
Handle CONFIG_PGTABLE_LEVELS correctly by checking in reverse order, such
that when e.g., CONFIG_PGTABLE_LEVELS==2 with
PGDIR_SIZE==P4D_SIZE==PUD_SIZE==PMD_SIZE will work as expected. Document
why that works.
There is one ugly case: powerpc 8xx, whereby we have an 8 MiB hugetlb
folio being mapped using two PTE page tables. While hugetlb wants to take
the PMD table lock, core-mm would grab the PTE table lock of one of both
PTE page tables. In such corner cases, we have to make sure that both
locks match, which is (fortunately!) currently guaranteed for 8xx as it
does not support SMP and consequently doesn't use split PT locks.
[1] https://lore.kernel.org/all/1bbfcc7f-f222-45a5-ac44-c5a1381c596d@redhat.com/
Link: https://lkml.kernel.org/r/20240801204748.99107-1-david@redhat.com
Fixes: 9cb28da54643 ("mm/gup: handle hugetlb in the generic follow_page_mask code")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement
(Thorsten Blum)
- kallsyms: Clean up interaction with LTO suffixes (Song Liu)
- refcount: Report UAF for refcount_sub_and_test(0) when counter==0
(Petr Pavlu)
- kunit/overflow: Avoid misallocation of driver name (Ivan Orlov)
* tag 'hardening-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kallsyms: Match symbols exactly with CONFIG_LTO_CLANG
kallsyms: Do not cleanup .llvm.<hash> suffix before sorting symbols
kunit/overflow: Fix UB in overflow_allocation_test
gcc-plugins: randstruct: Remove GCC 4.7 or newer requirement
refcount: Report UAF for refcount_sub_and_test(0) when counter==0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
|
|
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes: 220915857e29 ("Bluetooth: Adding driver and quirk defs for multi-role LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit bab2f5e8fd5d2f759db26b78d9db57412888f187.
Joel reported that this commit breaks userspace and stops sensors in
SDM845 from working. Also breaks other qcom SoC devices running postmarketOS.
Cc: stable <stable@kernel.org>
Cc: Ekansh Gupta <quic_ekangupt@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/9a9f5646-a554-4b65-8122-d212bb665c81@umsystem.edu
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: bab2f5e8fd5d ("misc: fastrpc: Restrict untrusted app to attach to privileged PD")
Link: https://lore.kernel.org/r/20240815094920.8242-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg
has been replaced with vsock_bpf_recvmsg(). Thus the following
recursiion could happen:
vsock_bpf_recvmsg()
-> __vsock_recvmsg()
-> vsock_connectible_recvmsg()
-> prot->recvmsg()
-> vsock_bpf_recvmsg() again
We need to fix it by calling the original ->recvmsg() without any BPF
sockmap logic in __vsock_recvmsg().
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com
Cc: Bobby Eshleman <bobby.eshleman@bytedance.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
qseecom_scm_dev(), qseecom_dma_alloc() and qseecom_dma_free() are no
longer used following the conversion to using tzmem. Remove them.
Fixes: 6612103ec35a ("firmware: qcom: qseecom: convert to using the TZ allocator")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240731-tzmem-efivars-fix-v2-2-f0e84071ec07@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix failure to start guests with kvm.use_gisa=0
- Panic if (un)share fails to maintain security.
ARM:
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
- Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
- Fix smatch issues
- Small cleanups
- Make x2APIC ID 100% readonly
- Fix typo in uapi constant
Generic:
- Use synchronize_srcu_expedited() on irqfd shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG
KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
KVM: eventfd: Use synchronize_srcu_expedited() on shutdown
KVM: selftests: Add a testcase to verify x2APIC is fully readonly
KVM: x86: Make x2APIC ID 100% readonly
KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id())
KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page()
KVM: SVM: Fix an error code in sev_gmem_post_populate()
KVM: SVM: Fix uninitialized variable bug
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
s390/uv: Panic for set and remove shared access UVC errors
KVM: s390: fix validity interception issue when gisa is switched off
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
...
|
|
Replace IS_ENABLED() with IS_REACHABLE() to substitute empty stubs for:
i2c_acpi_get_i2c_resource()
i2c_acpi_client_count()
i2c_acpi_find_bus_speed()
i2c_acpi_new_device_by_fwnode()
i2c_adapter *i2c_acpi_find_adapter_by_handle()
i2c_acpi_waive_d0_probe()
commit f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI
functions") partially fixed this conditional to depend on CONFIG_I2C,
but used IS_ENABLED(), which is wrong since CONFIG_I2C is tristate.
CONFIG_ACPI is boolean but let's also change it to use IS_REACHABLE()
to future-proof it against becoming tristate.
Somehow despite testing various combinations of CONFIG_I2C and CONFIG_ACPI
we missed the combination CONFIG_I2C=m, CONFIG_ACPI=y.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f17c06c6608a ("i2c: Fix conditional for substituting empty ACPI functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408141333.gYnaitcV-lkp@intel.com/
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
"INVALID" is misspelt in "SEV_RET_INAVLID_CONFIG". Since this is part of
the UAPI, keep the current definition and add a new one with the fix.
Fix-suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Message-ID: <20240814083113.21622-1-amit@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disallow read-only memslots for SEV-{ES,SNP} VM types, as KVM can't
directly emulate instructions for ES/SNP, and instead the guest must
explicitly request emulation. Unless the guest explicitly requests
emulation without accessing memory, ES/SNP relies on KVM creating an MMIO
SPTE, with the subsequent #NPF being reflected into the guest as a #VC.
But for read-only memslots, KVM deliberately doesn't create MMIO SPTEs,
because except for ES/SNP, doing so requires setting reserved bits in the
SPTE, i.e. the SPTE can't be readable while also generating a #VC on
writes. Because KVM never creates MMIO SPTEs and jumps directly to
emulation, the guest never gets a #VC. And since KVM simply resumes the
guest if ES/SNP guests trigger emulation, KVM effectively puts the vCPU
into an infinite #NPF loop if the vCPU attempts to write read-only memory.
Disallow read-only memory for all VMs with protected state, i.e. for
upcoming TDX VMs as well as ES/SNP VMs. For TDX, it's actually possible
to support read-only memory, as TDX uses EPT Violation #VE to reflect the
fault into the guest, e.g. KVM could configure read-only SPTEs with RX
protections and SUPPRESS_VE=0. But there is no strong use case for
supporting read-only memslots on TDX, e.g. the main historical usage is
to emulate option ROMs, but TDX disallows executing from shared memory.
And if someone comes along with a legitimate, strong use case, the
restriction can always be lifted for TDX.
Don't bother trying to retroactively apply the restriction to SEV-ES
VMs that are created as type KVM_X86_DEFAULT_VM. Read-only memslots can't
possibly work for SEV-ES, i.e. disallowing such memslots is really just
means reporting an error to userspace instead of silently hanging vCPUs.
Trying to deal with the ordering between KVM_SEV_INIT and memslot creation
isn't worth the marginal benefit it would provide userspace.
Fixes: 26c44aa9e076 ("KVM: SEV: define VM types for SEV and SEV-ES")
Fixes: 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support")
Cc: Peter Gonda <pgonda@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240809190319.1710470-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Fix the name of file lease slab cache. When file leases were split
out of file locks the name of the file lock slab cache was used for
the file leases slab cache as well.
- Fix a type in take_fd() helper.
- Fix infinite directory iteration for stable offsets in tmpfs.
- When the icache is pruned all reclaimable inodes are marked with
I_FREEING and other processes that try to lookup such inodes will
block.
But some filesystems like ext4 can trigger lookups in their inode
evict callback causing deadlocks. Ext4 does such lookups if the
ea_inode feature is used whereby a separate inode may be used to
store xattrs.
Introduce I_LRU_ISOLATING which pins the inode while its pages are
reclaimed. This avoids inode deletion during inode_lru_isolate()
avoiding the deadlock and evict is made to wait until
I_LRU_ISOLATING is done.
netfs:
- Fault in smaller chunks for non-large folio mappings for
filesystems that haven't been converted to large folios yet.
- Fix the CONFIG_NETFS_DEBUG config option. The config option was
renamed a short while ago and that introduced two minor issues.
First, it depended on CONFIG_NETFS whereas it wants to depend on
CONFIG_NETFS_SUPPORT. The former doesn't exist, while the latter
does. Second, the documentation for the config option wasn't fixed
up.
- Revert the removal of the PG_private_2 writeback flag as ceph is
using it and fix how that flag is handled in netfs.
- Fix DIO reads on 9p. A program watching a file on a 9p mount
wouldn't see any changes in the size of the file being exported by
the server if the file was changed directly in the source
filesystem. Fix this by attempting to read the full size specified
when a DIO read is requested.
- Fix a NULL pointer dereference bug due to a data race where a
cachefiles cookies was retired even though it was still in use.
Check the cookie's n_accesses counter before discarding it.
nsfs:
- Fix ioctl declaration for NS_GET_MNTNS_ID from _IO() to _IOR() as
the kernel is writing to userspace.
pidfs:
- Prevent the creation of pidfds for kthreads until we have a
use-case for it and we know the semantics we want. It also confuses
userspace why they can get pidfds for kthreads.
squashfs:
- Fix an unitialized value bug reported by KMSAN caused by a
corrupted symbolic link size read from disk. Check that the
symbolic link size is not larger than expected"
* tag 'vfs-6.11-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Squashfs: sanity check symbolic link size
9p: Fix DIO read through netfs
vfs: Don't evict inode under the inode lru traversing context
netfs: Fix handling of USE_PGPRIV2 and WRITE_TO_CACHE flags
netfs, ceph: Revert "netfs: Remove deprecated use of PG_private_2 as a second writeback flag"
file: fix typo in take_fd() comment
pidfd: prevent creation of pidfds for kthreads
netfs: clean up after renaming FSCACHE_DEBUG config
libfs: fix infinite directory reads for offset dir
nsfs: fix ioctl declaration
fs/netfs/fscache_cookie: add missing "n_accesses" check
filelock: fix name of file_lease slab cache
netfs: Fault in smaller chunks for non-large folio mappings
|
|
commit 779dbc2e78d7 ("printk: Avoid non-panic CPUs writing
to ringbuffer") disabled non-panic CPUs to further write messages to
ringbuffer after panicked.
Since the commit, non-panicked CPU's are not allowed to write to
ring buffer after panicked and CPU backtrace which is triggered
after panicked to sample non-panicked CPUs' backtrace no longer
serves its function as it has nothing to print.
Fix the issue by allowing non-panicked CPUs to write into ringbuffer
while CPU backtrace is in flight.
Fixes: 779dbc2e78d7 ("printk: Avoid non-panic CPUs writing to ringbuffer")
Signed-off-by: Ryo Takakura <takakura@valinux.co.jp>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240812072703.339690-1-takakura@valinux.co.jp
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The inode reclaiming process(See function prune_icache_sb) collects all
reclaimable inodes and mark them with I_FREEING flag at first, at that
time, other processes will be stuck if they try getting these inodes
(See function find_inode_fast), then the reclaiming process destroy the
inodes by function dispose_list(). Some filesystems(eg. ext4 with
ea_inode feature, ubifs with xattr) may do inode lookup in the inode
evicting callback function, if the inode lookup is operated under the
inode lru traversing context, deadlock problems may happen.
Case 1: In function ext4_evict_inode(), the ea inode lookup could happen
if ea_inode feature is enabled, the lookup process will be stuck
under the evicting context like this:
1. File A has inode i_reg and an ea inode i_ea
2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea
3. Then, following three processes running like this:
PA PB
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// i_reg is added into lru, lru->i_ea->i_reg
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
i_ea->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(i_reg)
spin_unlock(&i_reg->i_lock)
spin_unlock(lru_lock)
rm file A
i_reg->nlink = 0
iput(i_reg) // i_reg->nlink is 0, do evict
ext4_evict_inode
ext4_xattr_delete_inode
ext4_xattr_inode_dec_ref_all
ext4_xattr_inode_iget
ext4_iget(i_ea->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(i_ea) ----→ AA deadlock
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&i_ea->i_state)
Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file
deleting process holds BASEHD's wbuf->io_mutex while getting the
xattr inode, which could race with inode reclaiming process(The
reclaiming process could try locking BASEHD's wbuf->io_mutex in
inode evicting function), then an ABBA deadlock problem would
happen as following:
1. File A has inode ia and a xattr(with inode ixa), regular file B has
inode ib and a xattr.
2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa
3. Then, following three processes running like this:
PA PB PC
echo 2 > /proc/sys/vm/drop_caches
shrink_slab
prune_dcache_sb
// ib and ia are added into lru, lru->ixa->ib->ia
prune_icache_sb
list_lru_walk_one
inode_lru_isolate
ixa->i_state |= I_FREEING // set inode state
inode_lru_isolate
__iget(ib)
spin_unlock(&ib->i_lock)
spin_unlock(lru_lock)
rm file B
ib->nlink = 0
rm file A
iput(ia)
ubifs_evict_inode(ia)
ubifs_jnl_delete_inode(ia)
ubifs_jnl_write_inode(ia)
make_reservation(BASEHD) // Lock wbuf->io_mutex
ubifs_iget(ixa->i_ino)
iget_locked
find_inode_fast
__wait_on_freeing_inode(ixa)
| iput(ib) // ib->nlink is 0, do evict
| ubifs_evict_inode
| ubifs_jnl_delete_inode(ib)
↓ ubifs_jnl_write_inode
ABBA deadlock ←-----make_reservation(BASEHD)
dispose_list // cannot be executed by prune_icache_sb
wake_up_bit(&ixa->i_state)
Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING
to pin the inode in memory while inode_lru_isolate() reclaims its pages
instead of using ordinary inode reference. This way inode deletion
cannot be triggered from inode_lru_isolate() thus avoiding the deadlock.
evict() is made to wait for I_LRU_ISOLATING to be cleared before
proceeding with inode cleanup.
Link: https://lore.kernel.org/all/37c29c42-7685-d1f0-067d-63582ffac405@huaweicloud.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219022
Fixes: e50e5129f384 ("ext4: xattr-in-inode support")
Fixes: 7959cf3a7506 ("ubifs: journal: Handle xattrs like files")
Cc: stable@vger.kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20240809031628.1069873-1-chengzhihao@huaweicloud.com
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A subsequent change will need to pass a depth argument to
acpi_execute_reg_methods(), so prepare that function for it.
No intentional functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/8451567.NyiUUSuA9g@rjwysocki.net
|
|
This reverts commit 0e6b6dedf168 ("Revert "ACPI: EC: Evaluate orphan
_REG under EC device") because the problem addressed by it will be
addressed differently in what follows.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/3236716.5fSG56mABF@rjwysocki.net
|
|
doorbell rings
After napi_complete_done() is called when NAPI is polling in the current
process context, another NAPI may be scheduled and start running in
softirq on another CPU and may ring the doorbell before the current CPU
does. When combined with unnecessary rings when there is no need to arm
the CQ, it triggers error paths in the hardware.
This patch fixes this by calling napi_complete_done() after doorbell
rings. It limits the number of unnecessary rings when there is
no need to arm. MANA hardware specifies that there must be one doorbell
ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as
soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical
workloads, the 4 CQ wraparounds proves to be big enough that it rarely
exceeds this limit before all the napi weight is consumed.
To implement this, add a per-CQ counter cq->work_done_since_doorbell,
and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 0c9f17877891 ("iommu: Remove guest pasid related interfaces and definitions")
removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240808140619.2498535-1-yuehaibing@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
fixed a NULL pointer dereference panic, but didn't fix the issue that
fails to update attached freplace prog to prog_array map.
Since commit 1c123c567fb1 ("bpf: Resolve fext program type when checking map compatibility"),
freplace prog and its target prog are able to tail call each other.
And the commit 3aac1ead5eb6 ("bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attach")
sets prog->aux->dst_prog as NULL after attaching freplace prog to its
target prog.
After loading freplace the prog_array's owner type is BPF_PROG_TYPE_SCHED_CLS.
Then, after attaching freplace its prog->aux->dst_prog is NULL.
Then, while updating freplace in prog_array the bpf_prog_map_compatible()
incorrectly returns false because resolve_prog_type() returns
BPF_PROG_TYPE_EXT instead of BPF_PROG_TYPE_SCHED_CLS.
After this patch the resolve_prog_type() returns BPF_PROG_TYPE_SCHED_CLS
and update to prog_array can succeed.
Fixes: f7866c358733 ("bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT")
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The NETFS_RREQ_USE_PGPRIV2 and NETFS_RREQ_WRITE_TO_CACHE flags aren't used
correctly. The problem is that we try to set them up in the request
initialisation, but we the cache may be in the process of setting up still,
and so the state may not be correct. Further, we secondarily sample the
cache state and make contradictory decisions later.
The issue arises because we set up the cache resources, which allows the
cache's ->prepare_read() to switch on NETFS_SREQ_COPY_TO_CACHE - which
triggers cache writing even if we didn't set the flags when allocating.
Fix this in the following way:
(1) Drop NETFS_ICTX_USE_PGPRIV2 and instead set NETFS_RREQ_USE_PGPRIV2 in
->init_request() rather than trying to juggle that in
netfs_alloc_request().
(2) Repurpose NETFS_RREQ_USE_PGPRIV2 to merely indicate that if caching is
to be done, then PG_private_2 is to be used rather than only setting
it if we decide to cache and then having netfs_rreq_unlock_folios()
set the non-PG_private_2 writeback-to-cache if it wasn't set.
(3) Split netfs_rreq_unlock_folios() into two functions, one of which
contains the deprecated code for using PG_private_2 to avoid
accidentally doing the writeback path - and always use it if
USE_PGPRIV2 is set.
(4) As NETFS_ICTX_USE_PGPRIV2 is removed, make netfs_write_begin() always
wait for PG_private_2. This function is deprecated and only used by
ceph anyway, and so label it so.
(5) Drop the NETFS_RREQ_WRITE_TO_CACHE flag and use
fscache_operation_valid() on the cache_resources instead. This has
the advantage of picking up the result of netfs_begin_cache_read() and
fscache_begin_write_operation() - which are called after the object is
initialised and will wait for the cache to come to a usable state.
Just reverting ae678317b95e[1] isn't a sufficient fix, so this need to be
applied on top of that. Without this as well, things like:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: {
and:
WARNING: CPU: 13 PID: 3621 at fs/ceph/caps.c:3386
may happen, along with some UAFs due to PG_private_2 not getting used to
wait on writeback completion.
Fixes: 2ff1e97587f4 ("netfs: Replace PG_fscache by setting folio->private and marking dirty")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Hristo Venev <hristo@venev.name>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk/ [1]
Link: https://lore.kernel.org/r/1173209.1723152682@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
second writeback flag"
This reverts commit ae678317b95e760607c7b20b97c9cd4ca9ed6e1a.
Revert the patch that removes the deprecated use of PG_private_2 in
netfslib for the moment as Ceph is actually still using this to track
data copied to the cache.
Fixes: ae678317b95e ("netfs: Remove deprecated use of PG_private_2 as a second writeback flag")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
https: //lore.kernel.org/r/3575457.1722355300@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The explanatory comment above take_fd() contains a typo, fix that to not
confuse readers.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240809135035.748109-1-minipli@grsecurity.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The kernel is writing an object of type __u64, so the ioctl has to be
defined to _IOR(NSIO, 0x5, __u64) instead of _IO(NSIO, 0x5).
Reported-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20240730164554.GA18486@altlinux.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull fd bitmap fix from Al Viro:
"Fix bitmap corruption on close_range() by cleaning up
copy_fd_bitmaps()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into topic/cirrus-hp-g12
spi: Add empty versions of ACPI lookup functions
A patch from Richard Fitzgerald adding dummy versions of the ACPI lookup
functions for SPI:
Provide empty versions of acpi_spi_count_resources(),
acpi_spi_device_alloc() and acpi_spi_find_controller_by_adev()
if the real functions are not being built.
This commit fixes two problems with the original definitions:
1) There wasn't an empty version of these functions
2) The #if only depended on CONFIG_ACPI. But the functions are implemented
in the core spi.c so CONFIG_SPI_MASTER must also be enabled for the real
functions to exist.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
|
|
Pull drm fixes from Dave Airlie:
"Weekly regular fixes, mostly amdgpu with i915/xe having a few each,
and then some misc bits across the board, seems about right for rc3
time.
client:
- fix null ptr deref
bridge:
- connector: fix double free
atomic:
- fix async flip update
panel:
- document panel
omap:
- add config dependency
tests:
- fix gem shmem test
drm buddy:
- Add start address to trim function
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
xe:
- Fix off-by-one when processing RTP rules
- Use dma_fence_chain_free in chain fence unused as a sync
- Fix PL1 disable flow in xe_hwmon_power_max_write
- Take ref to VM in delayed dump snapshot
i915:
- correct dual pps handling for MTL_PCH+ [display]
- Adjust vma offset for framebuffer mmap offset [gem]
- Fix Virtual Memory mapping boundaries calculation [gem]
- Allow evicting to use the requested placement
- Attempt to get pages without eviction first"
* tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits)
drm/xe: Take ref to VM in delayed snapshot
drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write
drm/xe: Use dma_fence_chain_free in chain fence unused as a sync
drm/xe/rtp: Fix off-by-one when processing rules
drm/amdgpu: Add DCC GFX12 flag to enable address alignment
drm/amdgpu: correct sdma7 max dw
drm/amdgpu: Add address alignment support to DCC buffers
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
drm/amdgpu: change non-dcc buffer copy configuration
drm/amdgpu: Forward soft recovery errors to userspace
drm/amdgpu: add golden setting for gc v12
drm/buddy: Add start address support to trim function
drm/amd/display: Add missing program DET segment call to pipe init
drm/amd/display: Add missing DCN314 to the DML Makefile
drm/amdgpu: force to use legacy inv in mmhub
drm/amd/pm: update powerplay structure on smu v14.0.2/3
drm/amd/display: Add missing mcache registers
drm/amd/display: Add dcc propagation value
drm/amd/display: Add missing DET segments programming
drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd
...
|
|
Pull cpumask fix from Yury Norov:
"Fix for cpumask merge"
[ Mea culpa, this was my mismerge due to too much cut-and-paste - Linus ]
* tag 'bitmap-6.11-rc' of https://github.com/norov/linux:
cpumask: Fix crash on updating CPU enabled mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobe fixes from Masami Hiramatsu:
- Fix misusing str_has_prefix() parameter order to check symbol prefix
correctly
- bpf: remove unused declaring of bpf_kprobe_override
* tag 'probes-fixes-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Fix to check symbol prefixes correctly
bpf: kprobe: remove unused declaring of bpf_kprobe_override
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of lots of small changes, almost all device-specific:
- A series of fixes for ASoC Qualcomm stuff
- Various fixes for Cirrus ASoC and HD-audio codecs
- A few AMD ASoC quirks and usual HD-audio quirks
- Other misc fixes, including a long-time regression in USB-audio"
* tag 'sound-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ASoC: cs35l56: Patch CS35L56_IRQ1_MASK_18 to the default value
ASoC: meson: axg-fifo: fix irq scheduling issue with PREEMPT_RT
MAINTAINERS: Update Cirrus Logic parts to linux-sound mailing list
ASoC: dt-bindings: qcom,wcd939x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd934x: Correct reset GPIO polarity in example
ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in example
ASoC: amd: yc: Add quirk entry for OMEN by HP Gaming Laptop 16-n0xxx
ASoC: codecs: ES8326: button detect issue
ASoC: amd: yc: Support mic on Lenovo Thinkpad E14 Gen 6
ALSA: usb-audio: Re-add ScratchAmp quirk entries
ALSA: hda/realtek: Add Framework Laptop 13 (Intel Core Ultra) to quirks
ALSA: hda/hdmi: Yet more pin fix for HP EliteDesk 800 G4
ALSA: hda: Add HP MP9 G4 Retail System AMS to force connect list
ASoC: cs35l56: Handle OTP read latency over SoundWire
ASoC: codecs: lpass-macro: fix missing codec version
ALSA: line6: Fix racy access to midibuf
ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL
ASoC: cs35l56: Stop creating ALSA controls for firmware coefficients
ASoC: wm_adsp: Add control_add callback and export wm_adsp_control_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
Two fixes on the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
Quite a lot of fixes have come in since the merge window, there's some
repetitive fixes over the Qualcomm drivers increasing the patch count,
along with a large batch of fixes from Cirrus. We also have some quirks
and some individual fixes.
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-08:
amdgpu:
- DMCUB fix
- Fix DET programming on some DCNs
- DCC fixes
- DCN 4.0.1 fixes
- SMU 14.0.x update
- MMHUB fix
- DCN 3.1.4 fix
- GC 12.0 fixes
- Fix soft recovery error propogation
- SDMA 7.0 fixes
- DSC fix
drm buddy:
- Add start address to trim function
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808161134.1227671-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
|
|
The CPU enabled mask instead of the CPU possible mask should be used
by set_cpu_enabled(). Otherwise, we run into crash due to write to
the read-only CPU possible mask when vCPU is hot added on ARM64.
(qemu) device_add host-arm-cpu,id=cpu1,socket-id=1
Unable to handle kernel write to read-only memory at virtual address ffff800080fa7190
:
Call trace:
register_cpu+0x1a4/0x2e8
arch_register_cpu+0x84/0xd8
acpi_processor_add+0x480/0x5b0
acpi_bus_attach+0x1c4/0x300
acpi_dev_for_one_check+0x3c/0x50
device_for_each_child+0x68/0xc8
acpi_dev_for_each_child+0x48/0x80
acpi_bus_attach+0x84/0x300
acpi_bus_scan+0x74/0x220
acpi_scan_rescan_bus+0x54/0x88
acpi_device_hotplug+0x208/0x478
acpi_hotplug_work_fn+0x2c/0x50
process_one_work+0x15c/0x3c0
worker_thread+0x2ec/0x400
kthread+0x120/0x130
ret_from_fork+0x10/0x20
Fix it by passing the CPU enabled mask instead of the CPU possible
mask to set_cpu_enabled().
Fixes: 51c4767503d5 ("Merge tag 'bitmap-6.11-rc1' of https://github.com:/norov/linux")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab18676 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because ring_buffer_nr_pages() is not an inline function and user accesses
buffer->buffers[cpu]->nr_pages directly, the function ring_buffer_nr_pages
is removed.
Signed-off-by: Jianhui Zhou <912460177@qq.com>
Link: https://lore.kernel.org/tencent_F4A7E9AB337F44E0F4B858D07D19EF460708@qq.com
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
- Add a new start parameter in trim function to specify exact
address from where to start the trimming. This would help us
in situations like if drivers would like to do address alignment
for specific requirements.
- Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this
flag to disable the allocator trimming part. This patch enables
the drivers control trimming and they can do it themselves
based on the application requirements.
v1:(Matthew)
- check new_start alignment with min chunk_size
- use range_overflows()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db65eb46de135338d6177f8853e0fd208f19d63e)
|
|
Instead of using an atomic counter for the trace_event_file reference
counter, use the refcount interface. It has various checks to make sure
the reference counting is correct, and will warn if it detects an error
(like refcount_inc() on '0').
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240726144208.687cce24@rorschach.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When a reference counter is at zero and refcount_sub_and_test() is invoked
to subtract zero, the function accepts this request without any warning and
returns true. This behavior does not seem ideal because the counter being
already at zero indicates a use-after-free. Furthermore, returning true by
refcount_sub_and_test() in this case potentially results in a double-free
done by its caller.
Modify the underlying function __refcount_sub_and_test() to warn about this
case as a use-after-free and have it return false to avoid the potential
double-free.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240717130023.5675-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The cyttsp4 touchscreen driver was contributed in 2013 and since then
has seen no updates. The driver uses platform data (no device tree
support) and there are no users of it in the mainline kernel. There were
occasional fixes to it for issues either found by static code analysis
tools or via visual inspection, but otherwise the driver is completely
untested.
Remove the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use the late-read buffer in the CS35L56 SoundWire interface to
read OTP memory.
The OTP memory has a longer access latency than chip registers
and cannot guarantee to return the data value in the SoundWire
control response if the bus clock is >4.8 MHz. The Cirrus
SoundWire peripheral IP exposes the bridge-to-bus read buffer
and status bits. For a read from OTP the bridge status bits are
polled to wait for the OTP data to be loaded into the read buffer
and the data is then read from there.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Link: https://patch.msgid.link/20240805140839.26042-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After the commit 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction
pointer with original one"), "bpf_kprobe_override" is not used anywhere
anymore, and we can remove it now.
Link: https://lore.kernel.org/all/20240710085939.11520-1-dongml2@chinatelecom.cn/
Fixes: 66665ad2f102 ("tracing/kprobe: bpf: Compare instruction pointer with original one")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
