| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This adds getrandom() support to the vDSO.
First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which
lets the kernel zero out pages anytime under memory pressure, which
enables allocating memory that never gets swapped to disk but also
doesn't count as being mlocked.
Then, the vDSO implementation of getrandom() is introduced in a
generic manner and hooked into random.c.
Next, this is implemented on x86. (Also, though it's not ready for
this pull, somebody has begun an arm64 implementation already)
Finally, two vDSO selftests are added.
There are also two housekeeping cleanup commits"
* tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
MAINTAINERS: add random.h headers to RNG subsection
random: note that RNDGETPOOL was removed in 2.6.9-rc2
selftests/vDSO: add tests for vgetrandom
x86: vdso: Wire up getrandom() vDSO implementation
random: introduce generic vDSO getrandom() implementation
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
|
|
Commit e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a
folio") simplified hostfs_read_folio(), but in the process of converting
to using folios natively also mis-used the folio_zero_tail() function
due to the very confusing API of that function.
Very arguably it's folio_zero_tail() API itself that is buggy, since it
would make more sense (and the documentation kind of implies) that the
third argument would be the pointer to the beginning of the folio
buffer.
But no, the third argument to folio_zero_tail() is where we should start
zeroing the tail (even if we already also pass in the offset separately
as the second argument).
So fix the hostfs caller, and we can leave any folio_zero_tail() sanity
cleanup for later.
Reported-and-tested-by: Maciej Żenczykowski <maze@google.com>
Fixes: e3ec0fe944d2 ("hostfs: Convert hostfs_read_folio() to use a folio")
Link: https://lore.kernel.org/all/CANP3RGceNzwdb7w=vPf5=7BCid5HVQDmz1K5kC9JG42+HVAh_g@mail.gmail.com/
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In __wait_on_freeing_inode() we warn in case the inode_hash_lock is held
but the inode is unhashed. We then release the inode_lock. So using
"locked" as parameter name is confusing. Use is_inode_hash_locked as
parameter name instead.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When using cachefiles, lockdep may emit something similar to the circular
locking dependency notice below. The problem appears to stem from the
following:
(1) Cachefiles manipulates xattrs on the files in its cache when called
from ->writepages().
(2) The setxattr() and removexattr() system call handlers get the name
(and value) from userspace after taking the sb_writers lock, putting
accesses of the vma->vm_lock and mm->mmap_lock inside of that.
(3) The afs filesystem uses a per-inode lock to prevent multiple
revalidation RPCs and in writeback vs truncate to prevent parallel
operations from deadlocking against the server on one side and local
page locks on the other.
Fix this by moving the getting of the name and value in {get,remove}xattr()
outside of the sb_writers lock. This also has the minor benefits that we
don't need to reget these in the event of a retry and we never try to take
the sb_writers lock in the event we can't pull the name and value into the
kernel.
Alternative approaches that might fix this include moving the dispatch of a
write to the cache off to a workqueue or trying to do without the
validation lock in afs. Note that this might also affect other filesystems
that use netfslib and/or cachefiles.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-build2+ #956 Not tainted
------------------------------------------------------
fsstress/6050 is trying to acquire lock:
ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0
but task is already holding lock:
ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&vma->vm_lock->lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_write+0x3b/0x50
vma_start_write+0x6b/0xa0
vma_link+0xcc/0x140
insert_vm_struct+0xb7/0xf0
alloc_bprm+0x2c1/0x390
kernel_execve+0x65/0x1a0
call_usermodehelper_exec_async+0x14d/0x190
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
-> #3 (&mm->mmap_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
__might_fault+0x7c/0xb0
strncpy_from_user+0x25/0x160
removexattr+0x7f/0x100
__do_sys_fremovexattr+0x7e/0xb0
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (sb_writers#14){.+.+}-{0:0}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
percpu_down_read+0x3c/0x90
vfs_iocb_iter_write+0xe9/0x1d0
__cachefiles_write+0x367/0x430
cachefiles_issue_write+0x299/0x2f0
netfs_advance_write+0x117/0x140
netfs_write_folio.isra.0+0x5ca/0x6e0
netfs_writepages+0x230/0x2f0
afs_writepages+0x4d/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
__filemap_fdatawrite_range+0xa8/0xf0
file_write_and_wait_range+0x59/0x90
afs_release+0x10f/0x270
__fput+0x25f/0x3d0
__do_sys_close+0x43/0x70
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vnode->validate_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
afs_writepages+0x37/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
filemap_invalidate_inode+0x167/0x1e0
netfs_unbuffered_write_iter+0x1bd/0x2d0
vfs_write+0x22e/0x320
ksys_write+0xbc/0x130
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (mapping.invalidate_lock#3){++++}-{3:3}:
check_noncircular+0x119/0x160
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
filemap_fault+0x26e/0x8b0
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&vma->vm_lock->lock);
lock(&mm->mmap_lock);
lock(&vma->vm_lock->lock);
rlock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by fsstress/6050:
#0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
stack backtrace:
CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ #956
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
check_noncircular+0x119/0x160
? queued_spin_lock_slowpath+0x4be/0x510
? __pfx_check_noncircular+0x10/0x10
? __pfx_queued_spin_lock_slowpath+0x10/0x10
? mark_lock+0x47/0x160
? init_chain_block+0x9c/0xc0
? add_chain_block+0x84/0xf0
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
? __pfx___lock_acquire+0x10/0x10
? __lock_release.isra.0+0x13b/0x230
lock_acquire.part.0+0x103/0x280
? filemap_fault+0x26e/0x8b0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd7/0x120
down_read+0x95/0x200
? filemap_fault+0x26e/0x8b0
? __pfx_down_read+0x10/0x10
? __filemap_get_folio+0x25/0x1a0
filemap_fault+0x26e/0x8b0
? __pfx_filemap_fault+0x10/0x10
? find_held_lock+0x7c/0x90
? __pfx___lock_release.isra.0+0x10/0x10
? __pte_offset_map+0x99/0x110
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
? __pfx___handle_mm_fault+0x10/0x10
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/2136178.1721725194@warthog.procyon.org.uk
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
[brauner: fix minor issues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The counter is unconditionally incremented for each mount allocation.
If we set it to 1ULL << 32 we're losing 4294967296 as the first valid
non-32 bit mount id.
Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-1-834113cab0d2@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Set the maximum size of a subrequest that writes to cachefiles to be
MAX_RW_COUNT so that we don't overrun the maximum write we can make to the
backing filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599005.1721398742@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When netfslib is performing writeback (ie. ->writepages), it maintains two
parallel streams of writes, one to the server and one to the cache, but it
doesn't mark either stream of writes as active until it gets some data that
needs to be written to that stream.
This is done because some folios will only be written to the cache
(e.g. copying to the cache on read is done by marking the folios and
letting writeback do the actual work) and sometimes we'll only be writing
to the server (e.g. if there's no cache).
Now, since we don't actually dispatch uploads and cache writes in parallel,
but rather flip between the streams, depending on which has the lowest
so-far-issued offset, and don't wait for the subreqs to finish before
flipping, we can end up in a situation where, say, we issue a write to the
server and this completes before we start the write to the cache.
But because we only activate a stream when we first add a subreq to it, the
result collection code may run before we manage to activate the stream -
resulting in the folio being cleaned and having the writeback-in-progress
mark removed. At this point, the folio no longer belongs to us.
This is only really a problem for folios that need to be written to both
streams - and in that case, the upload to the server is started first,
followed by the write to the cache - and the cache write may see a bad
folio.
Fix this by activating the cache stream up front if there's a cache
available. If there's a cache, then all data is going to be written to it.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599053.1721398818@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The nsproxy structure contains nearly all of the namespaces associated
with a task. When a given namespace type is not supported by this kernel
the rules whether the corresponding pointer in struct nsproxy is NULL or
always init_<ns_type>_ns differ per namespace. Ideally, that wouldn't be
the case and for all namespace types we'd always set it to
init_<ns_type>_ns when the corresponding namespace type isn't supported.
Make sure we handle all namespaces where the pointer in struct nsproxy
can be NULL when the namespace type isn't supported.
Link: https://lore.kernel.org/r/20240722-work-pidfs-e6a83030f63e@brauner
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
syzbot call pidfd_ioctl() with cmd "PIDFD_GET_TIME_NAMESPACE" and disabled
CONFIG_TIME_NS, since time_ns is NULL, it will make NULL ponter deref in
open_namespace.
Fixes: 5b08bd408534 ("pidfs: allow retrieval of namespace file descriptors") # mainline only
Reported-and-tested-by: syzbot+34a0ee986f61f15da35d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34a0ee986f61f15da35d
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://lore.kernel.org/r/tencent_7FAE8DB725EE0DD69236DDABDDDE195E4F07@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
correct the comments of vfs_*() helpers in fs/namei.c, including:
1. vfs_create()
2. vfs_mknod()
3. vfs_mkdir()
4. vfs_rmdir()
5. vfs_symlink()
All of them come from the same commit:
6521f8917082 "namei: prepare for idmapped mounts"
The @dentry is actually the dentry of child directory rather than
base directory(parent directory), and thus the @dir has to be
modified due to the change of @dentry.
Signed-off-by: Congjie Zhou <zcjie0802@qq.com>
Link: https://lore.kernel.org/r/tencent_2FCF6CC9E10DC8A27AE58A5A0FE4FCE96D0A@qq.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Lockless hash lookup can find and lock the inode after it gets the
I_FREEING flag set, at which point it blocks waiting for teardown in
evict() to finish.
However, the flag is still set even after evict() wakes up all waiters.
This results in a race where if the inode lock is taken late enough, it
can happen after both hash removal and wakeups, meaning there is nobody
to wake the racing thread up.
This worked prior to RCU-based lookup because the entire ordeal was
synchronized with the inode hash lock.
Since unhashing requires the inode lock, we can safely check whether it
happened after acquiring it.
Link: https://lore.kernel.org/v9fs/20240717102458.649b60be@kernel.org/
Reported-by: Dominique Martinet <asmadeus@codewreck.org>
Fixes: 7180f8d91fcb ("vfs: add rcu-based find_inode variants for iget ops")
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240718151838.611807-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
CONFIG_FSCACHE_DEBUG should have been renamed to CONFIG_NETFS_DEBUG, so do
that now.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1410796.1721333406@warthog.procyon.org.uk
cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Revert commit 163eae0fb0d4c610c59a8de38040f8e12f89fd43 to get back the
original operation of the debugging macros.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240608151352.22860-2-ukleinek@kernel.org
Link: https://lore.kernel.org/r/1410685.1721333252@warthog.procyon.org.uk
cc: Uwe Kleine-König <ukleinek@kernel.org>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This moves the exec and binfmt_elf tests out of your way and into the
tests/ subdirectory, following the newly ratified KUnit naming
conventions. :)"
* tag 'execve-v6.11-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
execve: Move KUnit tests to tests/ subdirectory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"A pretty small update including mostly minor bug fixes in zoned
storage along with the large section support.
Enhancements:
- add support for FS_IOC_GETFSSYSFSPATH
- enable atgc dynamically if conditions are met
- use new ioprio Macro to get ckpt thread ioprio level
- remove unreachable lazytime mount option parsing
Bug fixes:
- fix null reference error when checking end of zone
- fix start segno of large section
- fix to cover read extent cache access with lock
- don't dirty inode for readonly filesystem
- allocate a new section if curseg is not the first seg in its zone
- only fragment segment in the same section
- truncate preallocated blocks in f2fs_file_open()
- fix to avoid use SSR allocate when do defragment
- fix to force buffered IO on inline_data inode
And some minor code clean-ups and sanity checks"
* tag 'f2fs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (26 commits)
f2fs: clean up addrs_per_{inode,block}()
f2fs: clean up F2FS_I()
f2fs: use meta inode for GC of COW file
f2fs: use meta inode for GC of atomic file
f2fs: only fragment segment in the same section
f2fs: fix to update user block counts in block_operations()
f2fs: remove unreachable lazytime mount option parsing
f2fs: fix null reference error when checking end of zone
f2fs: fix start segno of large section
f2fs: remove redundant sanity check in sanity_check_inode()
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
f2fs: fix to use mnt_{want,drop}_write_file replace file_{start,end}_wrtie
f2fs: clean up set REQ_RAHEAD given rac
f2fs: enable atgc dynamically if conditions are met
f2fs: fix to truncate preallocated blocks in f2fs_file_open()
f2fs: fix to cover read extent cache access with lock
f2fs: fix return value of f2fs_convert_inline_inode()
f2fs: use new ioprio Macro to get ckpt thread ioprio level
f2fs: fix to don't dirty inode for readonly filesystem
f2fs: fix to avoid use SSR allocate when do defragment
...
|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
Move the exec KUnit tests into a separate directory to avoid polluting
the local directory namespace. Additionally update MAINTAINERS for the
new files.
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240720170310.it.942-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- another fix for fsck getting stuck, from marcin
- small syzbot fix
- another undefined shift fix
* tag 'bcachefs-2024-07-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix printbuf usage while atomic
bcachefs: More informative error message in reattach_inode()
bcachefs: kill btree_trans_too_many_iters() in bch2_bucket_alloc_freelist()
bcachefs: mean_and_variance: Avoid too-large shift amounts
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- simple fileattr support
Fixes:
- transform resident to nonresident for compressed files
- the format of the "nocase" mount option
- getting file type
- many other internal bugs
Refactoring:
- remove unused functions and macros
- partial transition from page to folio (suggested by Matthew Wilcox)
- legacy ntfs support"
* tag 'ntfs3_for_6.11' of https://github.com/Paragon-Software-Group/linux-ntfs3: (42 commits)
fs/ntfs3: Fix formatting, change comments, renaming
fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed
fs/ntfs3: Implement simple fileattr
fs/ntfs3: Redesign legacy ntfs support
fs/ntfs3: Use function file_inode to get inode from file
fs/ntfs3: Minor ntfs_list_ea refactoring
fs/ntfs3: Check more cases when directory is corrupted
fs/ntfs3: Do copy_to_user out of run_lock
fs/ntfs3: Keep runs for $MFT::$ATTR_DATA and $MFT::$ATTR_BITMAP
fs/ntfs3: Missed error return
fs/ntfs3: Fix the format of the "nocase" mount option
fs/ntfs3: Fix field-spanning write in INDEX_HDR
ntfs3: Convert attr_wof_frame_info() to use a folio
ntfs3: Convert ni_readpage_cmpr() to take a folio
ntfs3: Convert ntfs_get_frame_pages() to use a folio
ntfs3: Remove calls to set/clear the error flag
ntfs3: Convert attr_make_nonresident to use a folio
ntfs3: Convert attr_data_write_resident to use a folio
ntfs3: Convert ntfs_write_end() to work on a folio
ntfs3: Convert attr_data_read_resident() to take a folio
...
|
|
Reported-by: syzbot+f765e51170cf13493f0b@syzkaller.appspotmail.com
Fixes: f12410bb7ddd ("bcachefs: Add an error message for insufficient rw journal devs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull smb server fixes from Steve French:
- two durable handle improvements
- two small cleanup patches
* tag '6.11-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add durable scavenger timer
ksmbd: avoid reclaiming expired durable opens by the client
ksmbd: Constify struct ksmbd_transport_ops
ksmbd: remove duplicate SMB2 Oplock levels definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- In the series "treewide: Refactor heap related implementation",
Kuan-Wei Chiu has significantly reworked the min_heap library code
and has taught bcachefs to use the new more generic implementation.
- Yury Norov's series "Cleanup cpumask.h inclusion in core headers"
reworks the cpumask and nodemask headers to make things generally
more rational.
- Kuan-Wei Chiu has sent along some maintenance work against our
sorting library code in the series "lib/sort: Optimizations and
cleanups".
- More library maintainance work from Christophe Jaillet in the series
"Remove usage of the deprecated ida_simple_xx() API".
- Ryusuke Konishi continues with the nilfs2 fixes and clanups in the
series "nilfs2: eliminate the call to inode_attach_wb()".
- Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix
GDB command error".
- Plus the usual shower of singleton patches all over the place. Please
see the relevant changelogs for details.
* tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits)
ia64: scrub ia64 from poison.h
watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
tsacct: replace strncpy() with strscpy()
lib/bch.c: use swap() to improve code
test_bpf: convert comma to semicolon
init/modpost: conditionally check section mismatch to __meminit*
init: remove unused __MEMINIT* macros
nilfs2: Constify struct kobj_type
nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro
math: rational: add missing MODULE_DESCRIPTION() macro
lib/zlib: add missing MODULE_DESCRIPTION() macro
fs: ufs: add MODULE_DESCRIPTION()
lib/rbtree.c: fix the example typo
ocfs2: add bounds checking to ocfs2_check_dir_entry()
fs: add kernel-doc comments to ocfs2_prepare_orphan_dir()
coredump: simplify zap_process()
selftests/fpu: add missing MODULE_DESCRIPTION() macro
compiler.h: simplify data_race() macro
build-id: require program headers to be right after ELF header
resource: add missing MODULE_DESCRIPTION()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Six smb3 client fixes, most for stable including important netfs fixes:
- various netfs related fixes for cifs addressing some regressions in
6.10 (e.g. generic/708 and some multichannel crediting related
issues)
- fix for a noisy log message on copy_file_range
- add trace point for read/write credits"
* tag '6.11-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix missing fscache invalidation
cifs: Add a tracepoint to track credits involved in R/W requests
cifs: Fix setting of zero_point after DIO write
cifs: Fix missing error code set
cifs: Fix server re-repick on subrequest retry
cifs: fix noisy message on copy_file_range
|
|
A network filesystem needs to implement a netfslib hook to invalidate
fscache if it's to be able to use the cache.
Fix cifs to implement the cache invalidation hook.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for build breakage on 32bit platforms"
* tag 'for-6.11-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: change BTRFS_MOUNT_* flags to 64bit type
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
|
|
The vDSO getrandom() implementation works with a buffer allocated with a
new system call that has certain requirements:
- It shouldn't be written to core dumps.
* Easy: VM_DONTDUMP.
- It should be zeroed on fork.
* Easy: VM_WIPEONFORK.
- It shouldn't be written to swap.
* Uh-oh: mlock is rlimited.
* Uh-oh: mlock isn't inherited by forks.
- It shouldn't reserve actual memory, but it also shouldn't crash when
page faulting in memory if none is available
* Uh-oh: VM_NORESERVE means segfaults.
It turns out that the vDSO getrandom() function has three really nice
characteristics that we can exploit to solve this problem:
1) Due to being wiped during fork(), the vDSO code is already robust to
having the contents of the pages it reads zeroed out midway through
the function's execution.
2) In the absolute worst case of whatever contingency we're coding for,
we have the option to fallback to the getrandom() syscall, and
everything is fine.
3) The buffers the function uses are only ever useful for a maximum of
60 seconds -- a sort of cache, rather than a long term allocation.
These characteristics mean that we can introduce VM_DROPPABLE, which
has the following semantics:
a) It never is written out to swap.
b) Under memory pressure, mm can just drop the pages (so that they're
zero when read back again).
c) It is inherited by fork.
d) It doesn't count against the mlock budget, since nothing is locked.
e) If there's not enough memory to service a page fault, it's not fatal,
and no signal is sent.
This way, allocations used by vDSO getrandom() can use:
VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE
And there will be no problem with OOMing, crashing on overcommitment,
using memory when not in use, not wiping on fork(), coredumps, or
writing out to swap.
In order to let vDSO getrandom() use this, expose these via mmap(2) as
MAP_DROPPABLE.
Note that this involves removing the MADV_FREE special case from
sort_folio(), which according to Yu Zhao is unnecessary and will simply
result in an extra call to shrink_folio_list() in the worst case. The
chunk removed reenables the swapbacked flag, which we don't want for
VM_DROPPABLE, and we can't conditionalize it here because there isn't a
vma reference available.
Finally, the provided self test ensures that this is working as desired.
Cc: linux-mm@kvack.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Add a tracepoint to track the credit changes and server in_flight value
involved in the lifetime of a R/W request, logging it against the
request/subreq debugging ID. This requires the debugging IDs to be
recorded in the cifs_credits struct.
The tracepoint can be enabled with:
echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_rw_credits/enable
Also add a three-state flag to struct cifs_credits to note if we're
interested in determining when the in_flight contribution ends and, if so,
to track whether we've decremented the contribution yet.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
At the moment, at the end of a DIO write, cifs calls netfs_resize_file() to
adjust the size of the file if it needs it. This will reduce the
zero_point (the point above which we assume a read will just return zeros)
if it's more than the new i_size, but won't increase it.
With DIO writes, however, we definitely want to increase it as we have
clobbered the local pagecache and then written some data that's not
available locally.
Fix cifs to make the zero_point above the end of a DIO or unbuffered write.
This fixes corruption seen occasionally with the generic/708 xfs-test. In
that case, the read-back of some of the written data is being
short-circuited and replaced with zeroes.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <sfrench@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cifs_strict_readv(), the default rc (-EACCES) is accidentally cleared by
a successful return from netfs_start_io_direct(), such that if
cifs_find_lock_conflict() fails, we don't return an error.
Fix this by resetting the default error code.
Fixes: 14b1cd25346b ("cifs: Fix locking in cifs_strict_readv()")
Cc: stable@vger.kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a subrequest is marked for needing retry, netfs will call
cifs_prepare_write() which will make cifs repick the server for the op
before renegotiating credits; it then calls cifs_issue_write() which
invokes smb2_async_writev() - which re-repicks the server.
If a different server is then selected, this causes the increment of
server->in_flight to happen against one record and the decrement to happen
against another, leading to misaccounting.
Fix this by just removing the repick code in smb2_async_writev(). As this
is only called from netfslib-driven code, cifs_prepare_write() should
always have been called first, and so server should never be NULL and the
preparatory step is repeated in the event that we do a retry.
The problem manifests as a warning looking something like:
WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs]
...
RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs]
...
smb2_writev_callback+0x334/0x560 [cifs]
cifs_demultiplex_thread+0x77a/0x11b0 [cifs]
kthread+0x187/0x1d0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
Which may be triggered by a number of different xfstests running against an
Azure server in multichannel mode. generic/249 seems the most repeatable,
but generic/215, generic/249 and generic/308 may also show it.
Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib")
Cc: stable@vger.kernel.org
Reported-by: Steve French <smfrench@gmail.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Aurelien Aptel <aaptel@suse.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are common cases where copy_file_range can noisily
log "source and target of copy not on same server"
e.g. the mv command across mounts to two different server's shares.
Change this to informational rather than logging as an error.
A followon patch will add dynamic trace points e.g. for
cifs_file_copychunk_range
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently the BTRFS_MOUNT_* flags are already beyond 32 bits, this is
going to cause compilation errors for some 32 bit systems, as their
unsigned long is only 32 bits long, thus flag
BTRFS_MOUNT_IGNORESUPERFLAGS overflows and can lead to errors.
Fix the problem by:
- Migrate all existing BTRFS_MOUNT_* flags to unsigned long long
- Migrate all mount option related variables to unsigned long long
* btrfs_fs_info::mount_opt
* btrfs_fs_context::mount_opt
* mount_opt parameter of btrfs_check_options()
* old_opts parameter of btrfs_remount_begin()
* old_opts parameter of btrfs_remount_cleanup()
* mount_opt parameter of btrfs_check_mountopts_zoned()
* mount_opt and opt parameters of check_ro_option()
Fixes: 32e6216512b4 ("btrfs: introduce new "rescue=ignoresuperflags" mount option")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When we're called via
trans commit -> btree split -> allocator
We may have already arbitrarily many btree_paths, for the transaction
commit we're trying to do; when this happens, the
btree_trans_too_many_iters() call causes us to livelock.
Since the allocator calls btree_iter_dontneed to release paths as it
iterates, this shouldn't cause any problems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull bcachefs updates from Kent Overstreet:
- Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped
This splits out the accounting of dirty sectors and stripe sectors in
alloc keys; this lets us see stripe buckets that still have unstriped
data in them.
This is needed for ensuring that erasure coding is working correctly,
as well as completing stripe creation after a crash.
- Metadata version 1.9: Disk accounting rewrite
The previous disk accounting scheme relied heavily on percpu counters
that were also sharded by outstanding journal buffer; it was fast but
not extensible or scalable, and meant that all accounting counters
were recorded in every journal entry.
The new disk accounting scheme stores accounting as normal btree
keys; updates are deltas until they are flushed by the btree write
buffer.
This means we have no practical limit on the number of counters, and
a new tagged union format that's easy to extend.
We now have counters for compression type/ratio, per-snapshot-id
usage, per-btree-id usage, and pending rebalance work.
- Self healing on read IO/checksum error
Data is now automatically rewritten if we get a read error and then a
successful retry
- Mount API conversion (thanks to Thomas Bertschinger)
- Better lockdep coverage
Previously, btree node locks were tracked individually by lockdep,
like any other lock. But we may take _many_ btree node locks
simultaneously, we easily blow through the limit of 48 locks that
lockdep can track, leading to lockdep turning itself off.
Tracking each btree node lock individually isn't really necessary
since we have our own cycle detector for deadlock avoidance and
centralized tracking of btree node locks, so we now have a single
lockdep_map in btree_trans for "any btree nodes are locked".
- Some more small incremental work towards online check_allocations
- Lots more debugging improvements
- Fixes, including:
- undefined behaviour fixes, originally noted as breaking userspace
LTO builds
- fix a spurious warning in fsck_err, reported by Marcin
- fix an integer overflow on trans->nr_updates, also reported by
Marcin; this broke during deletion of highly fragmented indirect
extents
* tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs: (120 commits)
lockdep: Add comments for lockdep_set_no{validate,track}_class()
bcachefs: Fix integer overflow on trans->nr_updates
bcachefs: silence silly kdoc warning
bcachefs: Fix fsck warning about btree_trans not passed to fsck error
bcachefs: Add an error message for insufficient rw journal devs
bcachefs: varint: Avoid left-shift of a negative value
bcachefs: darray: Don't pass NULL to memcpy()
bcachefs: Kill bch2_assert_btree_nodes_not_locked()
bcachefs: Rename BCH_WRITE_DONE -> BCH_WRITE_SUBMITTED
bcachefs: __bch2_read(): call trans_begin() on every loop iter
bcachefs: show none if label is not set
bcachefs: drop packed, aligned from bkey_inode_buf
bcachefs: btree node scan: fall back to comparing by journal seq
bcachefs: Add lockdep support for btree node locks
lockdep: lockdep_set_notrack_class()
bcachefs: Improve copygc_wait_to_text()
bcachefs: Convert clock code to u64s
bcachefs: Improve startup message
bcachefs: Self healing on read IO error
bcachefs: Make read_only a mount option again, but hidden
...
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for large folios
- Implement rpcrdma generic device removal notification
- Add client support for attribute delegations
- Use a LAYOUTRETURN during reboot recovery to report layoutstats
and errors
- Improve throughput for random buffered writes
- Add NVMe support to pnfs/blocklayout
Bugfixes:
- Fix rpcrdma_reqs_reset()
- Avoid soft lockups when using UDP
- Fix an nfs/blocklayout premature PR key unregestration
- Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
- Do not extend writes to the entire folio
- Pass explicit offset and count values to tracepoints
- Fix a race to wake up sleeping SUNRPC sync tasks
- Fix gss_status tracepoint output
Cleanups:
- Add missing MODULE_DESCRIPTION() macros
- Add blocklayout / SCSI layout tracepoints
- Remove asm-generic headers from xprtrdma verbs.c
- Remove unused 'struct mnt_fhstatus'
- Other delegation related cleanups
- Other folio related cleanups
- Other pNFS related cleanups
- Other xprtrdma cleanups"
* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
SUNRPC: Fixup gss_status tracepoint error output
SUNRPC: Fix a race to wake a sync task
nfs: split nfs_read_folio
nfs: pass explicit offset/count to trace events
nfs: do not extend writes to the entire folio
nfs/blocklayout: add support for NVMe
nfs: remove nfs_page_length
nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
nfs: move nfs_wait_on_request to write.c
nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
nfs: simplify nfs_folio_find_and_lock_request
nfs: remove nfs_folio_private_request
nfs: remove dead code for the old swap over NFS implementation
NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
nfs: Block on write congestion
nfs: Properly initialize server->writeback
nfs: Drop pointless check from nfs_commit_release_pages()
nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many cleanups and bug fixes in ext4, especially for the fast commit
feature.
Also some performance improvements; in particular, improving IOPS and
throughput on fast devices running Async Direct I/O by up to 20% by
optimizing jbd2_transaction_committed()"
* tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: make sure the first directory block is not a hole
ext4: check dot and dotdot of dx_root before making dir indexed
ext4: sanity check for NULL pointer after ext4_force_shutdown
jbd2: increase maximum transaction size
jbd2: drop pointless shrinker batch initialization
jbd2: avoid infinite transaction commit loop
jbd2: precompute number of transaction descriptor blocks
jbd2: make jbd2_journal_get_max_txn_bufs() internal
jbd2: avoid mount failed when commit block is partial submitted
ext4: avoid writing unitialized memory to disk in EA inodes
ext4: don't track ranges in fast_commit if inode has inlined data
ext4: fix possible tid_t sequence overflows
ext4: use ext4_update_inode_fsync_trans() helper in inode creation
ext4: add missing MODULE_DESCRIPTION()
jbd2: add missing MODULE_DESCRIPTION()
ext4: use memtostr_pad() for s_volume_name
jbd2: speed up jbd2_transaction_committed()
ext4: make ext4_da_map_blocks() buffer_head unaware
ext4: make ext4_insert_delayed_block() insert multi-blocks
ext4: factor out a helper to check the cluster allocation state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a missing rcu_read_unlock() in nsfs by switching to a cleanup
guard
- Add missing module descriptor for adfs
* tag 'vfs-6.11-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: use cleanup guard
fs/adfs: add MODULE_DESCRIPTION
|
|
Shifting a value by the width of its type or more is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't have more updates than paths, so btree_path_idx_t is the
correct type to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a btree_trans is in use it's supposed to be passed to fsck_err so
that it can be unlocked if we're waiting on userspace input; but the
btree IO paths do call fsck errors where a btree_trans exists on the
stack but it's not passed through.
But it's ok, because it's unlocked while doing IO.
Fixes: a850bde6498b ("bcachefs: fsck_err() may now take a btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This causes us to go read-only - need an error message saying why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Shifting a negative value left is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- 'reserve_mem' command line parameter to allow creation of named
memory reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
- cleanups and small improvements in memblock and mm_init
- new tests cases in memblock test suite
* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix implicit declaration of function 'numa_valid_node'
memblock: Move late alloc warning down to phys alloc
pstore/ramoops: Add ramoops.mem_name= command line option
mm/memblock: Add "reserve_mem" to reserved named memory at boot up
mm/mm_init.c: don't initialize page->lru again
mm/mm_init.c: not always search next deferred_init_pfn from very beginning
mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
mm/mm_init.c: get the highest zone directly
mm/mm_init.c: move nr_initialised reset down a bit
mm/memblock: fix a typo in description of for_each_mem_region()
mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
mm/memblock: return true directly on finding overlap region
memblock tests: add memblock_overlaps_region_checks
mm/memblock: fix comment for memblock_isolate_range()
memblock tests: add memblock_reserve_many_may_conflict_check()
memblock tests: add memblock_reserve_all_locations_check()
mm/memblock: remove empty dummy entry
|
