| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode time accessor updates from Christian Brauner:
"This finishes the conversion of all inode time fields to accessor
functions as discussed on list. Changing timestamps manually as we
used to do before is error prone. Using accessors function makes this
robust.
It does not contain the switch of the time fields to discrete 64 bit
integers to replace struct timespec and free up space in struct inode.
But after this, the switch can be trivially made and the patch should
only affect the vfs if we decide to do it"
* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
fs: rename inode i_atime and i_mtime fields
security: convert to new timestamp accessors
selinux: convert to new timestamp accessors
apparmor: convert to new timestamp accessors
sunrpc: convert to new timestamp accessors
mm: convert to new timestamp accessors
bpf: convert to new timestamp accessors
ipc: convert to new timestamp accessors
linux: convert to new timestamp accessors
zonefs: convert to new timestamp accessors
xfs: convert to new timestamp accessors
vboxsf: convert to new timestamp accessors
ufs: convert to new timestamp accessors
udf: convert to new timestamp accessors
ubifs: convert to new timestamp accessors
tracefs: convert to new timestamp accessors
sysv: convert to new timestamp accessors
squashfs: convert to new timestamp accessors
server: convert to new timestamp accessors
client: convert to new timestamp accessors
...
|
|
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
|
|
If there is no watch_queue, holding the pipe mutex is enough to
prevent concurrent writes, and we can avoid the spinlock.
O_NOTIFICATION_QUEUE is an exotic and rarely used feature, and of all
the pipes that exist at any given time, only very few actually have a
watch_queue, therefore it appears worthwile to optimize the common
case.
This patch does not optimize pipe_resize_ring() where the spinlocks
could be avoided as well; that does not seem like a worthwile
optimization because this function is not called often.
Related commits:
- commit 8df441294dd3 ("pipe: Check for ring full inside of the
spinlock in pipe_write()")
- commit b667b8673443 ("pipe: Advance tail pointer inside of wait
spinlock in pipe_read()")
- commit 189b0ddc2451 ("pipe: Fix missing lock in pipe_resize_ring()")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-4-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This reverts commit 8df441294dd3 ("pipe: Check for ring full inside of
the spinlock in pipe_write()") which was obsoleted by commit
c73be61cede ("pipe: Add general notification queue support") because
now pipe_write() fails early with -EXDEV if there is a watch_queue.
Without a watch_queue, no notifications can be posted to the pipe and
mutex protection is enough, as can be seen in splice_pipe_to_pipe()
which does not use the spinlock either.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-3-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the core vfs code to use the new timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185239.80830-2-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This code duplication was introduced by commit a194dfe6e6f6 ("pipe:
Rearrange sequence in pipe_write() to preallocate slot"), but since
the pipe's mutex is locked, nobody else can modify the value
meanwhile.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230919074045.1066796-1-max.kellermann@ionos.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
|
|
The pointer buf is being initializated with a value that is never read,
it is being re-assigned later on at the pointer where it is being used.
The initialization is redundant and can be removed. Cleans up clang scan
build warning:
fs/pipe.c:492:24: warning: Value stored to 'buf' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-Id: <20230818144556.1208082-1-colin.i.king@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-23-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The interface for fcntl expects the argument passed for the command
F_SETPIPE_SZ to be of type int. The current code wrongly treats it as
a long. In order to avoid access to undefined bits, we should explicitly
cast the argument to int.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: David Laight <David.Laight@ACULAB.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-morello@op-lists.linaro.org
Signed-off-by: Luca Vizzarro <Luca.Vizzarro@arm.com>
Message-Id: <20230414152459.816046-4-Luca.Vizzarro@arm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pipe reads or writes need to enable nonblocking attempts, if either
O_NONBLOCK is set on the file, or IOCB_NOWAIT is set in the iocb being
passed in. The latter isn't currently true, ensure we check for both
before waiting on data or space.
Fixes: afed6271f5b0 ("pipe: set FMODE_NOWAIT on pipes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <e5946d67-4e5e-b056-ba80-656bab12d9f6@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pipes themselves do not hold the the pipe lock across IO, and hence are
safe for RWF_NOWAIT/IOCB_NOWAIT usage. The "contract" for NOWAIT is
really "should not do IO under this lock", not strictly that we cannot
block or that the below code is in any way atomic. Pipes fulfil that
criteria.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
|
|
pipe_resize_ring() needs to take the pipe->rd_wait.lock spinlock to
prevent post_one_notification() from trying to insert into the ring
whilst the ring is being replaced.
The occupancy check must be done after the lock is taken, and the lock
must be taken after the new ring is allocated.
The bug can lead to an oops looking something like:
BUG: KASAN: use-after-free in post_one_notification.isra.0+0x62e/0x840
Read of size 4 at addr ffff88801cc72a70 by task poc/27196
...
Call Trace:
post_one_notification.isra.0+0x62e/0x840
__post_watch_notification+0x3b7/0x650
key_create_or_update+0xb8b/0xd20
__do_sys_add_key+0x175/0x340
__x64_sys_add_key+0xbe/0x140
do_syscall_64+0x5c/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported by Selim Enes Karaduman @Enesdex working with Trend Micro Zero
Day Initiative.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17291
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Fix data-races around epoll reported by KCSAN."
This series suppresses a false positive KCSAN's message and fixes a real
data-race.
This patch (of 2):
pipe_poll() runs locklessly and assigns 1 to poll_usage. Once poll_usage
is set to 1, it never changes in other places. However, concurrent writes
of a value trigger KCSAN, so let's make KCSAN happy.
BUG: KCSAN: data-race in pipe_poll / pipe_poll
write to 0xffff8880042f6678 of 4 bytes by task 174 on cpu 3:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
write to 0xffff8880042f6678 of 4 bytes by task 177 on cpu 1:
pipe_poll (fs/pipe.c:656)
ep_item_poll.isra.0 (./include/linux/poll.h:88 fs/eventpoll.c:853)
do_epoll_wait (fs/eventpoll.c:1692 fs/eventpoll.c:1806 fs/eventpoll.c:2234)
__x64_sys_epoll_wait (fs/eventpoll.c:2246 fs/eventpoll.c:2241 fs/eventpoll.c:2241)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 177 Comm: epoll_race Not tainted 5.17.0-58927-gf443e374ae13 #6
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Link: https://lkml.kernel.org/r/20220322002653.33865-1-kuniyu@amazon.co.jp
Link: https://lkml.kernel.org/r/20220322002653.33865-2-kuniyu@amazon.co.jp
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kuniyuki Iwashima <kuni1840@gmail.com>
Cc: "Soheil Hassas Yeganeh" <soheil@google.com>
Cc: "Sridhar Samudrala" <sridhar.samudrala@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662.
It turns out that making the pipe almost arbitrarily large has some
rather unexpected downsides. The kernel test robot reports a kernel
warning that is due to pipe->max_usage now growing to the point where
the iter_file_splice_write() buffer allocation can no longer be
satisfied as a slab allocation, and the
int nbufs = pipe->max_usage;
struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
GFP_KERNEL);
code sequence there will now always fail as a result.
That code could be modified to use kvcalloc() too, but I feel very
uncomfortable making those kinds of changes for a very niche use case
that really should have other options than make these kinds of
fundamental changes to pipe behavior.
Maybe the CRIU process dumping should be multi-threaded, and use
multiple pipes and multiple cores, rather than try to use one larger
pipe to minimize splice() calls.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
head, tail, ring_size are declared as unsigned int, so all local
variables that operate with these fields have to be unsigned to avoid
signed integer overflow.
Right now, it isn't an issue because the maximum pipe size is limited by
1U<<31.
Link: https://lkml.kernel.org/r/20220106171946.36128-1-avagin@gmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Suggested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Right now, kcalloc is used to allocate a pipe_buffer array. The size of
the pipe_buffer struct is 40 bytes. kcalloc allows allocating reliably
chunks with sizes less or equal to PAGE_ALLOC_COSTLY_ORDER (3). It
means that the maximum pipe size is 3.2MB in this case.
In CRIU, we use pipes to dump processes memory. CRIU freezes a target
process, injects a parasite code into it and then this code splices
memory into pipes. If a maximum pipe size is small, we need to do many
iterations or create many pipes.
kvcalloc attempt to allocate physically contiguous memory, but upon
failure, fall back to non-contiguous (vmalloc) allocation and so it
isn't limited by PAGE_ALLOC_COSTLY_ORDER.
The maximum pipe size for non-root users is limited by the
/proc/sys/fs/pipe-max-size sysctl that is 1MB by default, so only the
root user will be able to trigger vmalloc allocations.
Link: https://lkml.kernel.org/r/20220104171058.22580-1-avagin@gmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
So move the pipe sysctls to its own file.
Link: https://lkml.kernel.org/r/20211129205548.605569-10-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 9857a17f206ff374aea78bccfb687f145368be2e.
That commit was completely broken, and I should have caught on to it
earlier. But happily, the kernel test robot noticed the breakage fairly
quickly.
The breakage is because "try_get_page()" is about avoiding the page
reference count overflow case, but is otherwise the exact same as a
plain "get_page()".
In contrast, "try_get_compound_head()" is an entirely different beast,
and uses __page_cache_add_speculative() because it's not just about the
page reference count, but also about possibly racing with the underlying
page going away.
So all the commentary about how
"try_get_page() has fallen a little behind in terms of maintenance,
try_get_compound_head() handles speculative page references more
thoroughly"
was just completely wrong: yes, try_get_compound_head() handles
speculative page references, but the point is that try_get_page() does
not, and must not.
So there's no lack of maintainance - there are fundamentally different
semantics.
A speculative page reference would be entirely wrong in "get_page()",
and it's entirely wrong in "try_get_page()". It's not about
speculation, it's purely about "uhhuh, you can't get this page because
you've tried to increment the reference count too much already".
The reason the kernel test robot noticed this bug was that it hit the
VM_BUG_ON() in __page_cache_add_speculative(), which is all about
verifying that the context of any speculative page access is correct.
But since that isn't what try_get_page() is all about, the VM_BUG_ON()
tests things that are not correct to test for try_get_page().
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
try_get_page() is very similar to try_get_compound_head(), and in fact
try_get_page() has fallen a little behind in terms of maintenance:
try_get_compound_head() handles speculative page references more
thoroughly.
There are only two try_get_page() callsites, so just call
try_get_compound_head() directly from those, and remove try_get_page()
entirely.
Also, seeing as how this changes try_get_compound_head() into a non-static
function, provide some kerneldoc documentation for it.
Link: https://lkml.kernel.org/r/20210813044133.1536842-4-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.
Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable). User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.
But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).
The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.
This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong. What matters is that it used to work.
So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes. It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.
Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a66419 and 1b6b26ae7053 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed. Probably because the stress-ng problem case ends up
being timing-dependent too.
It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").
And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case. So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.
Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case. FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.
Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a88ca ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.
Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.
It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all. So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.
I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior. That
is sufficient for at least the hackbench case.
Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk. That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.
[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
up to you to decide whether you actually want to backport it or not.
It likely has no impact outside of synthetic benchmarks - Linus ]
Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a88ca ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:
int main()
{
int pipefd[2];
for (int i = 0; i < 1025; i++)
if (pipe(pipefd) == -1)
return 1;
size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
printf("%zd\n", bufsz);
char *buf = calloc(bufsz, 1);
write(pipefd[1], buf, bufsz);
read(pipefd[0], buf, bufsz-1);
write(pipefd[1], buf, 1);
}
Note that you may need to increase your RLIMIT_NOFILE before running the
program.
Fixes: 759c01142a ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.
In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already. Doing
extraneous wakeups will only cause potential thundering herd problems.
However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it". Even if there was no edge in sight.
Quoting Sandeep Patil:
"The commit 1b6b26ae7053 ('pipe: fix and clarify pipe write wakeup
logic') changed pipe write logic to wakeup readers only if the pipe
was empty at the time of write. However, there are libraries that
relied upon the older behavior for notification scheme similar to
what's described in [1]
One such library 'realm-core'[2] is used by numerous Android
applications. The library uses a similar notification mechanism as GNU
Make but it never drains the pipe until it is full. When Android moved
to v5.10 kernel, all applications using this library stopped working.
The library has since been fixed[3] but it will be a while before all
applications incorporate the updated library"
Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong. Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.
So add the extraneous wakeup, to approximate the old behavior.
[ I say "approximate", because the exact old behavior was to do a wakeup
not for each write(), but for each pipe buffer chunk that was filled
in. The behavior introduced by this change is not that - this is just
"every write will cause a wakeup, whether necessary or not", which
seems to be sufficient for the broken library use. ]
It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.
See commit f467a6a66419 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".
Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/
Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Delete duplicate words in fs/*.c.
The doubled words that are being dropped are:
that, be, the, in, and, for
Link: https://lkml.kernel.org/r/20201224052810.25315-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") sendfile() could no longer send data
from a real file to a pipe, breaking for example certain cgit
setups (e.g. when running behind fcgiwrap), because in this
case cgit will try to do exactly this: sendfile() to a pipe.
Fix this by using iter_file_splice_write for the splice_write
method of pipes, as suggested by Christoph.
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Switch the block device lookup interfaces to directly work with a dev_t
so that struct block_device references are only acquired by the
blkdev_get variants (and the blk-cgroup special case). This means that
we now don't need an extra reference in the inode and can generally
simplify handling of struct block_device to keep the lookups contained
in the core block layer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull vfs fix from Al Viro:
"Fixes an obvious bug (memory leak introduced in 5.8)"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
pipe: Fix memory leaks in create_pipe_files()
|
|
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Calling pipe2() with O_NOTIFICATION_PIPE could results in memory
leaks unless watch_queue_init() is successful.
In case of watch_queue_init() failure in pipe2() we are left
with inode and pipe_inode_info instances that need to be freed. That
failure exit has been introduced in commit c73be61cede5 ("pipe: Add
general notification queue support") and its handling should've been
identical to nearby treatment of alloc_file_pseudo() failures - it
is dealing with the same situation. As it is, the mainline kernel
leaks in that case.
Another problem is that CONFIG_WATCH_QUEUE and !CONFIG_WATCH_QUEUE
cases are treated differently (and the former leaks just pipe_inode_info,
the latter - both pipe_inode_info and inode).
Fixed by providing a dummy wacth_queue_init() in !CONFIG_WATCH_QUEUE
case and by having failures of wacth_queue_init() handled the same way
we handle alloc_file_pseudo() ones.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Signed-off-by: Qian Cai <cai@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull notification queue from David Howells:
"This adds a general notification queue concept and adds an event
source for keys/keyrings, such as linking and unlinking keys and
changing their attributes.
Thanks to Debarshi Ray, we do have a pull request to use this to fix a
problem with gnome-online-accounts - as mentioned last time:
https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47
Without this, g-o-a has to constantly poll a keyring-based kerberos
cache to find out if kinit has changed anything.
[ There are other notification pending: mount/sb fsinfo notifications
for libmount that Karel Zak and Ian Kent have been working on, and
Christian Brauner would like to use them in lxc, but let's see how
this one works first ]
LSM hooks are included:
- A set of hooks are provided that allow an LSM to rule on whether or
not a watch may be set. Each of these hooks takes a different
"watched object" parameter, so they're not really shareable. The
LSM should use current's credentials. [Wanted by SELinux & Smack]
- A hook is provided to allow an LSM to rule on whether or not a
particular message may be posted to a particular queue. This is
given the credentials from the event generator (which may be the
system) and the watch setter. [Wanted by Smack]
I've provided SELinux and Smack with implementations of some of these
hooks.
WHY
===
Key/keyring notifications are desirable because if you have your
kerberos tickets in a file/directory, your Gnome desktop will monitor
that using something like fanotify and tell you if your credentials
cache changes.
However, we also have the ability to cache your kerberos tickets in
the session, user or persistent keyring so that it isn't left around
on disk across a reboot or logout. Keyrings, however, cannot currently
be monitored asynchronously, so the desktop has to poll for it - not
so good on a laptop. This facility will allow the desktop to avoid the
need to poll.
DESIGN DECISIONS
================
- The notification queue is built on top of a standard pipe. Messages
are effectively spliced in. The pipe is opened with a special flag:
pipe2(fds, O_NOTIFICATION_PIPE);
The special flag has the same value as O_EXCL (which doesn't seem
like it will ever be applicable in this context)[?]. It is given up
front to make it a lot easier to prohibit splice&co from accessing
the pipe.
[?] Should this be done some other way? I'd rather not use up a new
O_* flag if I can avoid it - should I add a pipe3() system call
instead?
The pipe is then configured::
ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);
Messages are then read out of the pipe using read().
- It should be possible to allow write() to insert data into the
notification pipes too, but this is currently disabled as the
kernel has to be able to insert messages into the pipe *without*
holding pipe->mutex and the code to make this work needs careful
auditing.
- sendfile(), splice() and vmsplice() are disabled on notification
pipes because of the pipe->mutex issue and also because they
sometimes want to revert what they just did - but one or more
notification messages might've been interleaved in the ring.
- The kernel inserts messages with the wait queue spinlock held. This
means that pipe_read() and pipe_write() have to take the spinlock
to update the queue pointers.
- Records in the buffer are binary, typed and have a length so that
they can be of varying size.
This allows multiple heterogeneous sources to share a common
buffer; there are 16 million types available, of which I've used
just a few, so there is scope for others to be used. Tags may be
specified when a watchpoint is created to help distinguish the
sources.
- Records are filterable as types have up to 256 subtypes that can be
individually filtered. Other filtration is also available.
- Notification pipes don't interfere with each other; each may be
bound to a different set of watches. Any particular notification
will be copied to all the queues that are currently watching for it
- and only those that are watching for it.
- When recording a notification, the kernel will not sleep, but will
rather mark a queue as having lost a message if there's
insufficient space. read() will fabricate a loss notification
message at an appropriate point later.
- The notification pipe is created and then watchpoints are attached
to it, using one of:
keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);
where in both cases, fd indicates the queue and the number after is
a tag between 0 and 255.
- Watches are removed if either the notification pipe is destroyed or
the watched object is destroyed. In the latter case, a message will
be generated indicating the enforced watch removal.
Things I want to avoid:
- Introducing features that make the core VFS dependent on the
network stack or networking namespaces (ie. usage of netlink).
- Dumping all this stuff into dmesg and having a daemon that sits
there parsing the output and distributing it as this then puts the
responsibility for security into userspace and makes handling
namespaces tricky. Further, dmesg might not exist or might be
inaccessible inside a container.
- Letting users see events they shouldn't be able to see.
TESTING AND MANPAGES
====================
- The keyutils tree has a pipe-watch branch that has keyctl commands
for making use of notifications. Proposed manual pages can also be
found on this branch, though a couple of them really need to go to
the main manpages repository instead.
If the kernel supports the watching of keys, then running "make
test" on that branch will cause the testing infrastructure to spawn
a monitoring process on the side that monitors a notifications pipe
for all the key/keyring changes induced by the tests and they'll
all be checked off to make sure they happened.
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch
- A test program is provided (samples/watch_queue/watch_test) that
can be used to monitor for keyrings, mount and superblock events.
Information on the notifications is simply logged to stdout"
* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
smack: Implement the watch_key and post_notification hooks
selinux: Implement the watch_key security hook
keys: Make the KEY_NEED_* perms an enum rather than a mask
pipe: Add notification lossage handling
pipe: Allow buffers to be marked read-whole-or-error for notifications
Add sample notification program
watch_queue: Add a key/keyring notification facility
security: Add hooks to rule on setting a watch
pipe: Add general notification queue support
pipe: Add O_NOTIFICATION_PIPE
security: Add a hook for the point of notification insertion
uapi: General notification queue definitions
|
|
And replace the arcane return value convention with a simple bool
where true means success and false means failure.
[AV: braino fix folded in]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Just return 0 for success if it is not present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
All the op vectors are exactly the same, they are just used to encode
packet or nomerge behavior. There already is a flag for the packet
behavior, so just add a new one to allow for merging. Inverting it vs
the previous nomerge special casing actually allows for much nicer code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add handling for loss of notifications by having read() insert a
loss-notification message after it has read the pipe buffer that was last
in the ring when the loss occurred.
Lossage can come about either by running out of notification descriptors or
by running out of space in the pipe ring.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Allow a buffer to be marked such that read() must return the entire buffer
in one go or return ENOBUFS. Multiple buffers can be amalgamated into a
single read, but a short read will occur if the next "whole" buffer won't
fit.
This is useful for watch queue notifications to make sure we don't split a
notification across multiple reads, especially given that we need to
fabricate an overrun record under some circumstances - and that isn't in
the buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make it possible to have a general notification queue built on top of a
standard pipe. Notifications are 'spliced' into the pipe and then read
out. splice(), vmsplice() and sendfile() are forbidden on pipes used for
notifications as post_one_notification() cannot take pipe->mutex. This
means that notifications could be posted in between individual pipe
buffers, making iov_iter_revert() difficult to effect.
The way the notification queue is used is:
(1) An application opens a pipe with a special flag and indicates the
number of messages it wishes to be able to queue at once (this can
only be set once):
pipe2(fds, O_NOTIFICATION_PIPE);
ioctl(fds[0], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
(2) The application then uses poll() and read() as normal to extract data
from the pipe. read() will return multiple notifications if the
buffer is big enough, but it will not split a notification across
buffers - rather it will return a short read or EMSGSIZE.
Notification messages include a length in the header so that the
caller can split them up.
Each message has a header that describes it:
struct watch_notification {
__u32 type:24;
__u32 subtype:8;
__u32 info;
};
The type indicates the source (eg. mount tree changes, superblock events,
keyring changes, block layer events) and the subtype indicates the event
type (eg. mount, unmount; EIO, EDQUOT; link, unlink). The info field
indicates a number of things, including the entry length, an ID assigned to
a watchpoint contributing to this buffer and type-specific flags.
Supplementary data, such as the key ID that generated an event, can be
attached in additional slots. The maximum message size is 127 bytes.
Messages may not be padded or aligned, so there is no guarantee, for
example, that the notification type will be on a 4-byte bounary.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Rename (__)memcg_kmem_(un)charge() into (__)memcg_kmem_(un)charge_page()
to better reflect what they are actually doing:
1) call __memcg_kmem_(un)charge_memcg() to actually charge or uncharge
the current memcg
2) set or clear the PageKmemcg flag
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Andrei Vagin reported that commit 0ddad21d3e99 ("pipe: use exclusive
waits when reading or writing") broke one of the CRIU tests. He even
has a trivial reproducer:
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
int main()
{
int p[2];
pid_t p1, p2;
int status;
if (pipe(p) == -1)
return 1;
p1 = fork();
if (p1 == 0) {
close(p[1]);
read(p[0], &status, sizeof(status));
return 0;
}
p2 = fork();
if (p2 == 0) {
close(p[1]);
read(p[0], &status, sizeof(status));
return 0;
}
sleep(1);
close(p[1]);
wait(&status);
wait(&status);
return 0;
}
and the problem - once he points it out - is obvious. We use these nice
exclusive waits, but when the last writer goes away, it then needs to
wake up _every_ reader (and conversely, the last reader disappearing
needs to wake every writer, of course).
In fact, when going through this, we had several small oddities around
how to wake things. We did in fact wake every reader when we changed
the size of the pipe buffers. But that's entirely pointless, since that
just acts as a possible source of new space - no new data to read.
And when we change the size of the buffer, we don't need to wake all
writers even when we add space - that case acts just as if somebody made
space by reading, and any writer that finds itself not filling it up
entirely will wake the next one.
On the other hand, on the exit path, we tried to limit the wakeups with
the proper poll keys etc, which is entirely pointless, because at that
point we obviously need to wake up everybody. So don't do that: just
wake up everybody - but only do that if the counts changed to zero.
So fix those non-IO wakeups to be more proper: space change doesn't add
any new data, but it might make room for writers, so it wakes up a
writer. And the actual changes to reader/writer counts should wake up
everybody, since everybody is affected (ie readers will all see EOF if
the writers have gone away, and writers will all get EPIPE if all
readers have gone away).
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Reported-and-tested-by: Andrei Vagin <avagin@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes the pipe code use separate wait-queues and exclusive waiting
for readers and writers, avoiding a nasty thundering herd problem when
there are lots of readers waiting for data on a pipe (or, less commonly,
lots of writers waiting for a pipe to have space).
While this isn't a common occurrence in the traditional "use a pipe as a
data transport" case, where you typically only have a single reader and
a single writer process, there is one common special case: using a pipe
as a source of "locking tokens" rather than for data communication.
In particular, the GNU make jobserver code ends up using a pipe as a way
to limit parallelism, where each job consumes a token by reading a byte
from the jobserver pipe, and releases the token by writing a byte back
to the pipe.
This pattern is fairly traditional on Unix, and works very well, but
will waste a lot of time waking up a lot of processes when only a single
reader needs to be woken up when a writer releases a new token.
A simplified test-case of just this pipe interaction is to create 64
processes, and then pass a single token around between them (this
test-case also intentionally passes another token that gets ignored to
test the "wake up next" logic too, in case anybody wonders about it):
#include <unistd.h>
int main(int argc, char **argv)
{
int fd[2], counters[2];
pipe(fd);
counters[0] = 0;
counters[1] = -1;
write(fd[1], counters, sizeof(counters));
/* 64 processes */
fork(); fork(); fork(); fork(); fork(); fork();
do {
int i;
read(fd[0], &i, sizeof(i));
if (i < 0)
continue;
counters[0] = i+1;
write(fd[1], counters, (1+(i & 1)) *sizeof(int));
} while (counters[0] < 1000000);
return 0;
}
and in a perfect world, passing that token around should only cause one
context switch per transfer, when the writer of a token causes a
directed wakeup of just a single reader.
But with the "writer wakes all readers" model we traditionally had, on
my test box the above case causes more than an order of magnitude more
scheduling: instead of the expected ~1M context switches, "perf stat"
shows
231,852.37 msec task-clock # 15.857 CPUs utilized
11,250,961 context-switches # 0.049 M/sec
616,304 cpu-migrations # 0.003 M/sec
1,648 page-faults # 0.007 K/sec
1,097,903,998,514 cycles # 4.735 GHz
120,781,778,352 instructions # 0.11 insn per cycle
27,997,056,043 branches # 120.754 M/sec
283,581,233 branch-misses # 1.01% of all branches
14.621273891 seconds time elapsed
0.018243000 seconds user
3.611468000 seconds sys
before this commit.
After this commit, I get
5,229.55 msec task-clock # 3.072 CPUs utilized
1,212,233 context-switches # 0.232 M/sec
103,951 cpu-migrations # 0.020 M/sec
1,328 page-faults # 0.254 K/sec
21,307,456,166 cycles # 4.074 GHz
12,947,819,999 instructions # 0.61 insn per cycle
2,881,985,678 branches # 551.096 M/sec
64,267,015 branch-misses # 2.23% of all branches
1.702148350 seconds time elapsed
0.004868000 seconds user
0.110786000 seconds sys
instead. Much better.
[ Note! This kernel improvement seems to be very good at triggering a
race condition in the make jobserver (in GNU make 4.2.1) for me. It's
a long known bug that was fixed back in June 2017 by GNU make commit
b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to
avoid hangs.").
But there wasn't a new release of GNU make until 4.3 on Jan 19 2020,
so a number of distributions may still have the buggy version. Some
have backported the fix to their 4.2.1 release, though, and even
without the fix it's quite timing-dependent whether the bug actually
is hit. ]
Josh Triplett says:
"I've been hammering on your pipe fix patch (switching to exclusive
wait queues) for a month or so, on several different systems, and I've
run into no issues with it. The patch *substantially* improves
parallel build times on large (~100 CPU) systems, both with parallel
make and with other things that use make's pipe-based jobserver.
All current distributions (including stable and long-term stable
distributions) have versions of GNU make that no longer have the
jobserver bug"
Tested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a185eb,
with read side observing empty pipe and sleeping and write
side running out of space and then sleeping as well. In this
scenario there are 5 writers and 1 reader.
Problem is that after pipe_write() reacquires pipe lock, it
re-checks for empty pipe with potentially stale 'head' and
doesn't wake up read side anymore. pipe->tail can advance
beyond 'head', because there are multiple writers.
Use pipe->head for empty pipe check after reacquiring lock
to observe current state.
Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour.
Without patch it hanged within a minute.
Fixes: 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup logic")
Reported-by: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There's no need to separately check for signals while inside the locked
region, since we're going to do "wait_event_interruptible()" right
afterwards anyway, and the error handling is much simpler there.
The check for whether we had already read anything was also redundant,
since we no longer do the odd merging of reads when there are pending
writers.
But perhaps more importantly, this adds commentary about why we still
need to wake up possible writers even though we didn't read any data,
and why we can skip all the finishing touches now if we get a signal (or
had a signal pending) while waiting for more data.
[ This is a split-out cleanup from my "make pipe IO use exclusive wait
queues" thing, which I can't apply because it triggers a nasty bug in
the GNU make jobserver - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.
So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.
wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
