summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-06-03gpio: add a reusable generic gpio_chip using regmapMichael Walle
There are quite a lot simple GPIO controller which are using regmap to access the hardware. This driver tries to be a base to unify existing code into one place. This won't cover everything but it should be a good starting point. It does not implement its own irq_chip because there is already a generic one for regmap based devices. Instead, the irq_chip will be instantiated in the parent driver and its irq domain will be associate to this driver. For now it consists of the usual registers, like set (and an optional clear) data register, an input register and direction registers. Out-of-the-box, it supports consecutive register mappings and mappings where the registers have gaps between them with a linear mapping between GPIO offset and bit position. For weirder mappings the user can register its own .xlate(). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200528145845.31436-3-michael@walle.cc Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-03gpiolib: Introduce gpiochip_irqchip_add_domain()Michael Walle
The function connects an IRQ domain to a gpiochip and reuses gpiochip_to_irq() which is provided by gpiolib. gpiochip_irqchip_* and regmap_irq partially provide the same functionality. This function will help to connect just the minimal functionality of the gpiochip_irqchip which is needed to work together with regmap-irq. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200528145845.31436-2-michael@walle.cc Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-28gpio: gpiolib: Allow GPIO IRQs to lazy disableMaulik Shah
With 'commit 461c1a7d4733 ("gpiolib: override irq_enable/disable")' gpiolib overrides irqchip's irq_enable and irq_disable callbacks. If irq_disable callback is implemented then genirq takes unlazy path to disable irq. Underlying irqchip may not want to implement irq_disable callback to lazy disable irq when client drivers invokes disable_irq(). By overriding irq_disable callback, gpiolib ends up always unlazy disabling IRQ. Allow gpiolib to lazy disable IRQs by overriding irq_disable callback only if irqchip implemented irq_disable. In cases where irq_disable is not implemented irq_mask is overridden. Similarly override irq_enable callback only if irqchip implemented irq_enable otherwise irq_unmask is overridden. Fixes: 461c1a7d4733 ("gpiolib: override irq_enable/disable") Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/1590253873-11556-2-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-27gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditionalAndy Shevchenko
We already have two conditionals inside the outer one to check if the command is GPIO_GET_LINEINFO_WATCH_IOCTL. I think it's time to actually do what I have proposed in the first place, i.e. to separate GPIO_GET_LINEINFO_WATCH_IOCTL from GPIO_GET_LINEINFO_IOCTL. It's +13 LOCs, and surprisingly only +13 bytes of binary on x86_32, but for the price of much better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/20200525194028.74236-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-27Merge tag 'v5.7-rc7' into develLinus Walleij
Linux 5.7-rc7
2020-05-27Merge tag 'gpio-updates-for-v5.8-part2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio: updates for v5.8 - part 2 - fix the initialization ordering in gpio-max730x - make gpio-pxa buildable for compile testing - make gpio-pca953x buildable as a module
2020-05-25gpio: rcar: Fix runtime PM imbalance on errorDinghao Liu
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200522080839.32612-1-dinghao.liu@zju.edu.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: pca935x: Allow IRQ support for driver built as a moduleAndy Shevchenko
Perhaps by some historical reasons the IRQ support has been allowed only for built-in driver. However, there is nothing prevents us to build it as module an use as IRQ chip. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: pxa: Add COMPILE_TEST supportTiezhu Yang
Add COMPILE_TEST support to the PXA GPIO driver for better compile testing coverage. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_propertyAndy Shevchenko
has_irq member of struct dwapb_port_property is used only in one place, so, make it local test instead and remove from the structure. This local test is using memchr_inv() which is quite efficient in comparison to the original loop and possible little overhead can be neglected. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-4-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: Don't use IRQ 0 as valid Linux interruptAndy Shevchenko
IRQ 0 is not valid in Linux interrupt number space. Refactor the code with this kept in mind. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: avoid error message for optional IRQAndy Shevchenko
platform_get_irq() will generate an error message if the requested IRQ is not present. Use platform_get_irq_optional() to avoid the error message being generated. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-25gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registrationAndy Shevchenko
Add missed acpi_gpiochip_free_interrupts() call when unregistering ports. While at it, drop extra check to call acpi_gpiochip_request_interrupts(). There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes. Fixes: e6cb3486f5a1 ("gpio: dwapb: add gpio-signaled acpi event support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20200519131233.59032-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-24Merge tag 'efi-urgent-2020-05-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Don't return a garbage screen info when EFI framebuffer is not available - Make the early EFI console work properly with wider fonts instead of drawing garbage - Prevent a memory buffer leak in allocate_e820() - Print the firmware error record properly so it can be decoded by users - Fix a symbol clash in the host tool build which only happens with newer compilers. - Add a missing check for the event log version of TPM which caused boot failures on several Dell systems due to an attempt to decode SHA-1 format with the crypto agile algorithm" * tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tpm: check event log version before reading final events efi: Pull up arch-specific prototype efi_systab_show_arch() x86/boot: Mark global variables as static efi: cper: Add support for printing Firmware Error Record Reference efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820() efi/earlycon: Fix early printk for wider fonts efi/libstub: Avoid returning uninitialized data from setup_graphics()
2020-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna Bhowmik. 2) Nexthop attributes aren't being checked properly because of mis-initialized iterator, from David Ahern. 3) Revert iop_idents_reserve() change as it caused performance regressions and was just working around what is really a UBSAN bug in the compiler. From Yuqi Jin. 4) Read MAC address properly from ROM in bmac driver (double iteration proceeds past end of address array), from Jeremy Kerr. 5) Add Microsoft Surface device IDs to r8152, from Marc Payne. 6) Prevent reference to freed SKB in __netif_receive_skb_core(), from Boris Sukholitko. 7) Fix ACK discard behavior in rxrpc, from David Howells. 8) Preserve flow hash across packet scrubbing in wireguard, from Jason A. Donenfeld. 9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric Dumazet. 10) Fix encryption error checking in kTLS code, from Vadim Fedorenko. 11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki. 12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet. 13) Fix use after free in mlxsw driver, from Jiri Pirko. 14) Order kTLS key destruction properly in mlx5 driver, from Tariq Toukan. 15) Check devm_platform_ioremap_resource() return value properly in several drivers, from Tiezhu Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) net: smsc911x: Fix runtime PM imbalance on error net/mlx4_core: fix a memory leak bug. net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend net: phy: mscc: fix initialization of the MACsec protocol mode net: stmmac: don't attach interface until resume finishes net: Fix return value about devm_platform_ioremap_resource() net/mlx5: Fix error flow in case of function_setup failure net/mlx5e: CT: Correctly get flow rule net/mlx5e: Update netdev txq on completions during closure net/mlx5: Annotate mutex destroy for root ns net/mlx5: Don't maintain a case of del_sw_func being null net/mlx5: Fix cleaning unmanaged flow tables net/mlx5: Fix memory leak in mlx5_events_init net/mlx5e: Fix inner tirs handling net/mlx5e: kTLS, Destroy key object after destroying the TIS net/mlx5e: Fix allowed tc redirect merged eswitch offload cases net/mlx5: Avoid processing commands before cmdif is ready net/mlx5: Fix a race when moving command interface to events mode net/mlx5: Add command entry handling completion rxrpc: Fix a memory leak in rxkad_verify_response() ...
2020-05-23net: smsc911x: Fix runtime PM imbalance on errorDinghao Liu
Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23Merge tag 'mlx5-fixes-2020-05-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2020-05-22 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.13 ('net/mlx5: Add command entry handling completion') For -stable v5.2 ('net/mlx5: Fix error flow in case of function_setup failure') ('net/mlx5: Fix memory leak in mlx5_events_init') For -stable v5.3 ('net/mlx5e: Update netdev txq on completions during closure') ('net/mlx5e: kTLS, Destroy key object after destroying the TIS') ('net/mlx5e: Fix inner tirs handling') For -stable v5.6 ('net/mlx5: Fix cleaning unmanaged flow tables') ('net/mlx5: Fix a race when moving command interface to events mode') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net/mlx4_core: fix a memory leak bug.Qiushi Wu
In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer. Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspendGrygorii Strashko
vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: phy: mscc: fix initialization of the MACsec protocol modeAntoine Tenart
At the very end of the MACsec block initialization in the MSCC PHY driver, the MACsec "protocol mode" is set. This setting should be set based on the PHY id within the package, as the bank used to access the register used depends on this. This was not done correctly, and only the first bank was used leading to the two upper PHYs being unstable when using the VSC8584. This patch fixes it. Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: stmmac: don't attach interface until resume finishesLeon Yu
Commit 14b41a2959fb ("net: stmmac: Delete txtimer in suspend") was the first attempt to fix a race between mod_timer() and setup_timer() during stmmac_resume(). However the issue still exists as the commit only addressed half of the issue. Same race can still happen as stmmac_resume() re-attaches interface way too early - even before hardware is fully initialized. Worse, doing so allows network traffic to restart and stmmac_tx_timer_arm() being called in the middle of stmmac_resume(), which re-init tx timers in stmmac_init_coalesce(). timer_list will be corrupted and system crashes as a result of race between mod_timer() and setup_timer(). systemd--1995 2.... 552950018us : stmmac_suspend: 4994 ksoftirq-9 0..s2 553123133us : stmmac_tx_timer_arm: 2276 systemd--1995 0.... 553127896us : stmmac_resume: 5101 systemd--320 7...2 553132752us : stmmac_tx_timer_arm: 2276 (sd-exec-1999 5...2 553135204us : stmmac_tx_timer_arm: 2276 --------------------------------- pc : run_timer_softirq+0x468/0x5e0 lr : run_timer_softirq+0x570/0x5e0 Call trace: run_timer_softirq+0x468/0x5e0 __do_softirq+0x124/0x398 irq_exit+0xd8/0xe0 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0x60/0xb0 el1_irq+0xb8/0x180 arch_cpu_idle+0x38/0x230 default_idle_call+0x24/0x3c do_idle+0x1e0/0x2b8 cpu_startup_entry+0x28/0x48 secondary_start_kernel+0x1b4/0x208 Fix this by deferring netif_device_attach() to the end of stmmac_resume(). Signed-off-by: Leon Yu <leoyu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add files related to kdump z3fold: fix use-after-free when freeing handles sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init() MAINTAINERS: update email address for Naoya Horiguchi sh: include linux/time_types.h for sockios kasan: disable branch tracing for core runtime selftests/vm/write_to_hugetlbfs.c: fix unused variable warning selftests/vm/.gitignore: add mremap_dontunmap rapidio: fix an error in get_user_pages_fast() error handling x86: bitops: fix build regression device-dax: don't leak kernel memory to user space after unloading kmem
2020-05-23Merge tag 'driver-core-5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "So, turns out the kobject fix didn't quite work, so here are four patches that in the end, result in just two driver core fixes for reported issues that no one has had problems with. The kobject patch that was originally in here has now been reverted, as Guenter reported boot problems with it on some of his systems" * tag 'driver-core-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kobject: Make sure the parent does not get released before its children" kobject: Make sure the parent does not get released before its children driver core: Fix handling of SYNC_STATE_ONLY + STATELESS device links driver core: Fix SYNC_STATE_ONLY device link implementation
2020-05-23Merge tag 'char-misc-5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes for 5.7-rc7 that resolve some reported issues. Included in here are tiny fixes for the mei, coresight, rtsx, ipack, and mhi drivers. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: Add short delay after exit from ASPM bus: mhi: core: Fix some error return code ipack: tpci200: fix error return code in tpci200_register() coresight: cti: remove incorrect NULL return check mei: release me_cl object reference
2020-05-23Merge tag 'staging-5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc7 Nothing major, just a collection of IIO driver fixes for reported issues, and a few small staging driver fixes that people have found. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wfx: unlock on error path staging: greybus: Fix uninitialized scalar variable staging: kpc2000: fix error return code in kp2000_pcie_probe() iio: sca3000: Remove an erroneous 'get_device()' iio: adc: stm32-dfsdm: fix device used to request dma iio: adc: stm32-adc: fix device used to request dma iio: adc: ti-ads8344: Fix channel selection staging: iio: ad2s1210: Fix SPI reading iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()' iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw() iio: chemical: atlas-sensor: correct DO-SM channels
2020-05-23Merge tag 'tty-5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fix from Greg KH: "Here is a single serial driver fix for 5.7-rc7. It resolves an issue with the SiFive serial console init sequence that was reported a number of times. It has been in linux-next for a while now with no reported issues" * tag 'tty-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: add missing spin_lock_init for SiFive serial console
2020-05-23rapidio: fix an error in get_user_pages_fast() error handlingJohn Hubbard
In the case of get_user_pages_fast() returning fewer pages than requested, rio_dma_transfer() does not quite do the right thing. It attempts to release all the pages that were requested, rather than just the pages that were pinned. Fix the error handling so that only the pages that were successfully pinned are released. Fixes: e8de370188d0 ("rapidio: add mport char device driver") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-23device-dax: don't leak kernel memory to user space after unloading kmemDavid Hildenbrand
Assume we have kmem configured and loaded: [root@localhost ~]# cat /proc/iomem ... 140000000-33fffffff : Persistent Memory$ 140000000-1481fffff : namespace0.0 150000000-33fffffff : dax0.0 150000000-33fffffff : System RAM Assume we try to unload kmem. This force-unloading will work, even if memory cannot get removed from the system. [root@localhost ~]# rmmod kmem [ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined ... [ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot Now, we can reconfigure the namespace: [root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax [ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax [ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax ... This fails as expected due to the busy memory resource, and the memory cannot be used. However, the dax0.0 device is removed, and along its name. The name of the memory resource now points at freed memory (name of the device): [root@localhost ~]# cat /proc/iomem ... 140000000-33fffffff : Persistent Memory 140000000-1481fffff : namespace0.0 150000000-33fffffff : �_�^7_��/_��wR��WQ���^��� ... 150000000-33fffffff : System RAM We have to make sure to duplicate the string. While at it, remove the superfluous setting of the name and fixup a stale comment. Fixes: 9f960da72b25 ("device-dax: "Hotremove" persistent memory that is used like normal RAM") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.3] Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-22Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three minor fixes, two in drivers, one to fix a hang after reset with iSCSI, and one to avoid a spurious log message; and the final core one to correct a suspend/resume miscount with quiesced devices" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: Put lun_ref at end of tmr processing scsi: pm: Balance pm_only counter of request queue during system resume scsi: qla2xxx: Do not log message when reading port speed via sysfs
2020-05-22Merge tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Things seemed to have quieten down, though no i915 pull (I even gave them an extra 12 hours in case they were late). The amdgpu floating point fix is probably the largest, but it just moves some code around to it doesn't do fpu stuff outside the fpu boundaries. Otherwise it's just a couple of vmwgfx fixes (maintainer change) and two etnaviv fixes. vmwgfx: - change maintainers - fix redundant assignment - fix parameter name - fix return value etnaviv: - memory leak fix when userspace passes a invalid softpin address - off-by-one crashing the kernel in the perfmon domain iteration when the GPU core has both 2D and 3D capabilities amdgpu: - DP fix - Floating point fix - Fix cursor stutter issue" * tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Defer cursor lock until after VUPDATE drm/amd/display: Remove dml_common_def file drm/amd/display: DP training to set properly SCRAMBLING_DISABLE drm/edid: Add Oculus Rift S to non-desktop list drm/etnaviv: Fix a leak in submit_pin_objects() drm/etnaviv: fix perfmon domain interation drm/vmwgfx: Return true in function vmw_fence_obj_signaled() drm/vmwgfx: remove redundant assignment to variable ret drm/vmwgfx: Fix parameter name in vmw_bo_init drm/vmwgfx: update MAINTAINERS entry
2020-05-22net/mlx5: Fix error flow in case of function_setup failureShay Drory
Currently, if an error occurred during mlx5_function_setup(), we keep dev->state as DEVICE_STATE_UP. Fixing it by adding a goto label. Fixes: e161105e58da ("net/mlx5: Function setup/teardown procedures") Signed-off-by: Shay Drory <shayd@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5e: CT: Correctly get flow ruleRoi Dayan
The correct way is to us the flow_cls_offload_flow_rule() wrapper instead of f->rule directly. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5e: Update netdev txq on completions during closureMoshe Shemesh
On sq closure when we free its descriptors, we should also update netdev txq on completions which would not arrive. Otherwise if we reopen sqs and attach them back, for example on fw fatal recovery flow, we may get tx timeout. Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Annotate mutex destroy for root nsRoi Dayan
Invoke mutex_destroy() to catch any errors. Fixes: 2cc43b494a6c ("net/mlx5_core: Managing root flow table") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Don't maintain a case of del_sw_func being nullRoi Dayan
Add del_sw_func cb for root ns. Now there is no need to maintain a case of del_sw_func being null when freeing the node. Fixes: 2cc43b494a6c ("net/mlx5_core: Managing root flow table") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Fix cleaning unmanaged flow tablesRoi Dayan
Unmanaged flow tables doesn't have a parent and tree_put_node() assume there is always a parent if cleaning is needed. fix that. Fixes: 5281a0c90919 ("net/mlx5: fs_core: Introduce unmanaged flow tables") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Fix memory leak in mlx5_events_initMoshe Shemesh
Fix memory leak in mlx5_events_init(), in case create_single_thread_workqueue() fails, events struct should be freed. Fixes: 5d3c537f9070 ("net/mlx5: Handle event of power detection in the PCIE slot") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5e: Fix inner tirs handlingRoi Dayan
In the cited commit inner_tirs argument was added to create and destroy inner tirs, and no indication was added to mlx5e_modify_tirs_hash() function. In order to have a consistent handling, use inner_indir_tir[0].tirn in tirs destroy/modify function as an indication to whether inner tirs are created. Inner tirs are not created for representors and before this commit, a call to mlx5e_modify_tirs_hash() was sending HW commands to modify non-existent inner tirs. Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5e: kTLS, Destroy key object after destroying the TISTariq Toukan
The TLS TIS object contains the dek/key ID. By destroying the key first, the TIS would contain an invalid non-existing key ID. Reverse the destroy order, this also acheives the desired assymetry between the destroy and the create flows. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5e: Fix allowed tc redirect merged eswitch offload casesMaor Dickman
After changing the parent_id to be the same for both NICs of same The cited commit wrongly allow offload of tc redirect flows from VF to uplink and vice versa when devcies are on different eswitch, these cases aren't supported by HW. Disallow the above offloads when devcies are on different eswitch and VF LAG is not configured. Fixes: f6dc1264f1c0 ("net/mlx5e: Disallow tc redirect offload cases we don't support") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Avoid processing commands before cmdif is readyEran Ben Elisha
When driver is reloading during recovery flow, it can't get new commands till command interface is up again. Otherwise we may get to null pointer trying to access non initialized command structures. Add cmdif state to avoid processing commands while cmdif is not ready. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Fix a race when moving command interface to events modeEran Ben Elisha
After driver creates (via FW command) an EQ for commands, the driver will be informed on new commands completion by EQE. However, due to a race in driver's internal command mode metadata update, some new commands will still be miss-handled by driver as if we are in polling mode. Such commands can get two non forced completion, leading to already freed command entry access. CREATE_EQ command, that maps EQ to the command queue must be posted to the command queue while it is empty and no other command should be posted. Add SW mechanism that once the CREATE_EQ command is about to be executed, all other commands will return error without being sent to the FW. Allow sending other commands only after successfully changing the driver's internal command mode metadata. We can safely return error to all other commands while creating the command EQ, as all other commands might be sent from the user/application during driver load. Application can rerun them later after driver's load was finished. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net/mlx5: Add command entry handling completionMoshe Shemesh
When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-22net: sun: fix missing release regions in cas_init_one().Qiushi Wu
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it was not released after a call of the function “pci_write_config_byte” failed. Thus replace the jump target “err_write_cacheline” by "err_out_free_res". Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net: mscc: ocelot: fix address ageing time (again)Vladimir Oltean
ocelot_set_ageing_time has 2 callers: - felix_set_ageing_time: from drivers/net/dsa/ocelot/felix.c - ocelot_port_attr_ageing_set: from drivers/net/ethernet/mscc/ocelot.c The issue described in the fixed commit below actually happened for the felix_set_ageing_time code path only, since ocelot_port_attr_ageing_set was already dividing by 1000. So to make both paths symmetrical (and to fix addresses getting aged way too fast on Ocelot), stop dividing by 1000 at caller side altogether. Fixes: c0d7eccbc761 ("net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22r8169: fix OCP access on RTL8117Heiner Kallweit
According to r8168 vendor driver DASHv3 chips like RTL8168fp/RTL8117 need a special addressing for OCP access. Fix is compile-tested only due to missing test hardware. Fixes: 1287723aa139 ("r8169: add support for RTL8117") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload ↵Jiri Pirko
fails In case of reload fail, the mlxsw_sp->ports contains a pointer to a freed memory (either by reload_down() or reload_up() error path). Fix this by initializing the pointer to NULL and checking it before dereferencing in split/unsplit/type_set callpaths. Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net: ethernet: stmmac: Enable interface clocks on probe for IPQ806xJonathan McDowell
The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22netdevsim: Ensure policer drop counter always increasesIdo Schimmel
In case the policer drop counter is retrieved when the jiffies value is a multiple of 64, the counter will not be incremented. This randomly breaks a selftest [1] the reads the counter twice and checks that it was incremented: ``` TEST: Trap policer [FAIL] Policer drop counter was not incremented ``` Fix by always incrementing the counter by 1. [1] tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh Fixes: ad188458d012 ("netdevsim: Add devlink-trap policer support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>