| Age | Commit message (Collapse) | Author |
|---|
|
When removing kernel modules by:
rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core
Driver uses skb_queue_purge() to purge TX skb, but not report tx status
causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue()
to correct this.
Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing
between TX work and purge TX queue, flush and destroy TX work in advance.
wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local
choice (Reason: 3=DEAUTH_LEAVING)
------------[ cut here ]------------
Have pending ack frames!
WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
CPU: 3 PID: 9232 Comm: rmmod Tainted: G C
6.10.1-200.fc40.aarch64 #1
Hardware name: pine64 Pine64 PinePhone Braveheart
(1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
sp : ffff80008c1b37b0
x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0
x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff
x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000
x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000
x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964
x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0
x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000
Call trace:
ieee80211_free_ack_frame+0x5c/0x90 [mac80211]
idr_for_each+0x74/0x110
ieee80211_free_hw+0x44/0xe8 [mac80211]
rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio]
sdio_bus_remove+0x44/0x180
device_remove+0x54/0x90
device_release_driver_internal+0x1d4/0x238
driver_detach+0x54/0xc0
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x78
sdio_unregister_driver+0x2c/0x40
rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs]
__do_sys_delete_module.isra.0+0x190/0x338
__arm64_sys_delete_module+0x1c/0x30
invoke_syscall+0x74/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x158
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
---[ end trace 0000000000000000 ]---
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALeDE9OAa56KMzgknaCD3quOgYuEHFx9_hcT=OFgmMAb+8MPyA@mail.gmail.com/
Tested-by: Ping-Ke Shih <pkshih@realtek.com> # 8723DU
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-2-pkshih@realtek.com
|
|
These are never modified, so make them const:
card_enable_flow_8703b
card_disable_flow_8703b
rtw8703b_ops
rtw8723d_ops
card_enable_flow_8723d
card_disable_flow_8723d
trans_carddis_to_cardemu_8821c
trans_cardemu_to_act_8821c
trans_act_to_cardemu_8821c
trans_cardemu_to_carddis_8821c
card_enable_flow_8821c
card_disable_flow_8821c
rtw8821c_dig
page_table_8821c
rqpn_table_8821c
prioq_addrs_8821c
rtw8821c_ops
card_enable_flow_8822b
card_disable_flow_8822b
prioq_addrs_8822b
rtw8822b_ops
rtw8822b_edcca_th
card_enable_flow_8822c
card_disable_flow_8822c
prioq_addrs_8822c
rtw8822c_ops
rtw8822c_edcca_th
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/dae7994f-3491-40de-b537-ebf68df084bb@gmail.com
|
|
Update DACK (digital-to-analog converters calibration) log to v2 by
firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-6-pkshih@realtek.com
|
|
Print out IQ signal calibration log from firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-5-pkshih@realtek.com
|
|
TSSI is short for transmitter signal strength indication. Print out the
TSSI log from firmware C2H events.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-4-pkshih@realtek.com
|
|
RX DCK stands for receiver DC calibration. The v1 format adds a field to
indicate the calibration is for operation channel or an average value for
all scanning channels. Update the format accordingly, and increase
firmware format sequence to 2.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-3-pkshih@realtek.com
|
|
Firmware needs more time to execute TSSI calibration command. Enlarge
timeout time accordingly, otherwise driver throws messages:
rtw89_8922ae 0000:03:00.0: failed to wait RF TSSI
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240913071340.41822-2-pkshih@realtek.com
|
|
Don't populate the read-only arrays params, toshiba_smid1, toshiba_smid2,
samsung_smid and lenovo_smid on the stack at run time, instead make them
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240912135335.590464-1-colin.i.king@gmail.com
|
|
As commit cbe16f35bee6 ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()")
said, the code below is subobtimal. IRQF_NO_AUTOEN flag can be used by
drivers to request_irq(). It prevents the automatic enabling of the
requested interrupt in the same safe way. With that the usage can be
simplified and corrected.
irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-4-ruanjinjie@huawei.com
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 853402a00823 ("mwifiex: Enable WoWLAN for both sdio and pcie")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-3-ruanjinjie@huawei.com
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: cd8d3d321285 ("p54spi: p54spi driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910124314.698896-2-ruanjinjie@huawei.com
|
|
Providing the random seed to firmware was tied to the fact that the
device has a valid OTP, which worked for some Apple chips. However,
it turns out the BCM43752 device also needs the random seed in order
to get firmware running. Suspect it is simply tied to the firmware
branch used for the device. Introducing a mechanism to allow setting
it for a device through the device table.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-4-9d80fea5326d@wesion.com
|
|
WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
to the top of brcmf_of_probe. Change function prototypes from void
to int and add appropriate errno's for return values that will be
send to bus when error occurred.
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # On RK3588 EVB1
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240910-wireless-mainline-v14-3-9d80fea5326d@wesion.com
|
|
Resources definition can become simpler and more organised by
using the dedicated helpers.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Tested-by: Sabeeh Khan <sabeeh-khan@ti.com>
Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-4-vassilisamir@gmail.com
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Sabeeh Khan <sabeeh-khan@ti.com>
Tested-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-3-vassilisamir@gmail.com
|
|
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type().
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904154919.118513-2-vassilisamir@gmail.com
|
|
This is completely unused.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-10-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EPROBE_DEFER, which probably wasn't available when this driver was
written, can be used instead of waiting manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240912024903.6201-9-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_property_read_u32 can be used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-8-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids having to use own struct member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-7-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cleans it up automatically. No need to handle manually.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switching to devm management of mii_bus allows to remove
mdiobus_unregister calls and thus avoids needing a mii_bus global struct
member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-5-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows removing manual iounmap.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-4-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's the last to go in remove. Safe to let devm handle it.
Also move request_irq to probe for clarity. It's removed in _remove not
close.
Use dev_err_probe instead of printk. Handles EPROBE_DEFER automatically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allows to simplify the code slightly. This is safe to do as free_netdev
gets called last.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240912024903.6201-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Display channel info in the RPM map debugfs output.
With this, cat /sys/kernel/debug/cn10k/rvu_pf_rpm_map
would display channel number for each device in addition to
the existing data.
Sample output:
PCI dev RVU PF Func NIX block rpm LMAC CHAN
0002:02:00.0 0x400 NIX0 rpm0 LMAC0 256
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Link: https://patch.msgid.link/20240912161450.164402-3-lcherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-11
The first patch is by Uwe Kleine-König targets all CAN platform driver
and switches back the remove function to struct
platform_driver::remove().
A patch by Stefan Mätje fixes the help text of the ESD USB driver.
Jake Hamby's patch masks an unneeded interrupt in the m_can driver.
The last 2 patches target the rockchip_canfd driver. Arnd Bergmann's
patch reworks the delay calculation for the timekeeping worker, a
patch by me fixes the decoding of the error code register.
* tag 'linux-can-next-for-6.12-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_handle_error_int_reg_ec(): fix decoding of error code register
can: rockchip_canfd: rkcanfd_timestamp_init(): rework delay calculation
can: m_can: m_can_chip_config(): mask timestamp wraparound IRQ
can: usb: Kconfig: Fix list of devices for esd_usb driver
can: Switch back to struct platform_driver::remove()
====================
Link: https://patch.msgid.link/20240912080438.2826895-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return an error if dma_set_mask_and_coherent() fails. Don't return
success.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/f53ed942-5ac2-424b-a1ed-9473c599905e@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make 'ethtool -S <intf>' output show some per rq/wq statistics that
don't exist in the netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-5-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report per queue wq/rq statistics in netdev qstats.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-4-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Collect and per rq/wq statistics.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-3-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_VDEVICE() macro and usual pattern for
PCI device ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240913125146.3628751-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The enetc driver uses ifdefs when checking whether
CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works
if the driver is built-in but fails if the driver is available as a
kernel module. Replace the instances of ifdef with use of the IS_ENABLED
macro, that will evaluate as true when this feature is built as a kernel
module and follows the kernel's coding style.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912173742.484549-1-martyn.welch@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "err" is always zero, so the following branch can never be executed:
if (err) {
ndev->stats.rx_dropped++;
kfree_skb(skb);
}
Therefore, the "if" statement can be removed.
Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/20240911135828.378317-1-usama.anjum@collabora.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we support multiple RX queues, enable default priority
to flow mapping so that higher priority packets come on higher
channels (flows).
The Classifier checks for PCP/DSCP priority in the packet and
routes them to the appropriate flow.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Policer registers in the ALE register space are just shadow registers
and use an index field in the policer table control register to read/write
to the actual Polier registers.
Add helper functions to Read and Write to Policer registers.
Also add a helper function to set the thread value to classifier/policer
mapping. Any packet that first matches the classifier will be sent to the
thread (flow) that is set in the classifier to thread mapping table.
If not set then it goes to the default flow.
Default behaviour is to have 8 classifiers to map 8 DSCP/PCP
priorities to N receive threads (flows). N depends on number of
RX channels enabled for the port.
As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have
lower priority than the user priority 0 (default). User priority 1 being
of the lowest priority.
[1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks
Table G-2 - Traffic type acronyms
Table G-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds regfileds for Policer registers and Thread mapping/control registers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use regfields for number of ALE Entries and Policers.
The variants that support Policers/Classifiers have the number
of policers encoded in the ALE_STATUS register.
Use that and show the number of Policers in the ALE info message.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Map the entire ALE registerspace using regmap.
Add regfields for Major and Minor Version fields.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
am65-cpsw can support up to 8 queues at Rx.
Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that.
As there is only one DMA channel for RX traffic, the
8 queues come as 8 flows in that channel.
By default, we will start with 1 flow as defined by the
macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS.
User can change the number of flows by ethtool like so
'ethtool -L ethx rx <N>'
All traffic will still come on flow 0. To get traffic on
different flows the Classifiers will need to be set up.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlx5e_free_rq previously cleaned resources in an order that was not the
reverse of the resource allocation order in mlx5e_alloc_rq.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new command status MLX5_CMD_STAT_NOT_READY to handle cases
where the firmware is not ready.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SFs didn't allow to configure IRQ affinity for its vectors. Allow users
to configure the affinity of the SFs irqs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20240911201757.1505453-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sync reset request is nacked by the driver when PCIe bridge connected to
mlx5 device has HotPlug interrupt enabled. However, when using reset
method of hot reset this check can be skipped as Hotplug is supported on
this reset method.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On device that supports sync reset for firmware activate using hot
reset, the driver queries the required reset method while handling the
sync reset request. If the required reset method is hot reset, the
driver will use pci_reset_bus() to reset the PCI link instead of the
link toggle.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Native capability for some steering engines lacks support for adding an
additional match with the same value to the same flow group. To accommodate
the NO APPEND flag in these scenarios, we include the new rule in the
existing flow table entry (fte) without immediate hardware commitment. When
a request is made to delete the corresponding hardware rule, we then commit
the pending rule to hardware.
Only one pending rule is supported because NO_APPEND is primarily used
during replacement operations. In this scenario, a rule is initially added.
When it needs replacement, the new rule is added with NO_APPEND set. Only
after the insertion of the new rule is the original rule deleted.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a dedicated structure to encapsulate flow context, actions,
destination count, and modification mask. This refactoring lays the
groundwork for forthcoming patches that will integrate the NO APPEND
software logic. Future modifications should focus solely on these
specific fields.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
