| Age | Commit message (Collapse) | Author |
|---|
|
The transmit buffers allocated by the driver can be used to transmit data
by any messages/commands needing the buffer. However, it is not guaranteed
to have been zero-ed before every new transmission and hence it will just
contain residual value from the previous transmission. There are several
reserved fields in the memory descriptors that must be zero(MBZ). The
receiver can reject the transmission if any such MBZ fields are non-zero.
While we can set the whole page to zero, it is not optimal as most of the
fields get initialised to the value required for the current transmission.
So, just set the reserved/MBZ fields to zero in the memory descriptors
explicitly to honour the requirement and keep the receiver happy.
Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces")
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Each physical partition can provide multiple services each with UUID.
Each such service can be presented as logical partition with a unique
combination of VM ID and UUID. The number of distinct UUID in a system
will be less than or equal to the number of logical partitions.
However, currently it fails to register more than one logical partition
or service within a physical partition as the device name contains only
VM ID while both VM ID and UUID are maintained in the partition information.
The kernel complains with the below message:
| sysfs: cannot create duplicate filename '/devices/arm-ffa-8001'
| CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8
| Hardware name: FVP Base RevC (DT)
| Call trace:
| dump_backtrace+0xf8/0x118
| show_stack+0x18/0x24
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| sysfs_create_dir_ns+0xe0/0x13c
| kobject_add_internal+0x220/0x3d4
| kobject_add+0x94/0x100
| device_add+0x144/0x5d8
| device_register+0x20/0x30
| ffa_device_register+0x88/0xd8
| ffa_setup_partitions+0x108/0x1b8
| ffa_init+0x2ec/0x3a4
| do_one_initcall+0xcc/0x240
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x100/0x16c
| kernel_init+0x20/0x1a0
| ret_from_fork+0x10/0x20
| kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to
| register things with the same name in the same directory.
| arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17
| ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001
By virtue of being random enough to avoid collisions when generated in a
distributed system, there is no way to compress UUID keys to the number
of bits required to identify each. We can eliminate '-' in the name but
it is not worth eliminating 4 bytes and add unnecessary logic for doing
that. Also v1.0 doesn't provide the UUID of the partitions which makes
it hard to use the same for the device name.
So to keep it simple, let us alloc an ID using ida_alloc() and append the
same to "arm-ffa" to make up a unique device name. Also stash the id value
in ffa_dev to help freeing the ID later when the device is destroyed.
Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration")
Reported-by: Lucian Paul-Trifu <lucian.paul-trifu@arm.com>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Commit bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
adds support to discovery the UUIDs of the partitions or just fetch the
partition count using the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag.
However the commit doesn't handle the fact that the older version doesn't
understand the flag and must be MBZ which results in firmware returning
invalid parameter error. That results in the failure of the driver probe
which is in correct.
Limit the usage of the PARTITION_INFO_GET_RETURN_COUNT_ONLY flag for the
versions above v1.0(i.e v1.1 and onwards) which fixes the issue.
Fixes: bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Reported-by: Jens Wiklander <jens.wiklander@linaro.org>
Reported-by: Marc Bonnici <marc.bonnici@arm.com>
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-2-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Currently ffa_drv->remove() is called unconditionally from
ffa_device_remove(). Since the driver registration doesn't check for it
and allows it to be registered without .remove callback, we need to check
for the presence of it before executing it from ffa_device_remove() to
above a NULL pointer dereference like the one below:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000086000004
| EC = 0x21: IABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP
| CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6
| Hardware name: FVP Base RevC (DT)
| pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c)
| pc : 0x0
| lr : ffa_device_remove+0x20/0x2c
| Call trace:
| 0x0
| device_release_driver_internal+0x16c/0x260
| driver_detach+0x90/0xd0
| bus_remove_driver+0xdc/0x11c
| driver_unregister+0x30/0x54
| ffa_driver_unregister+0x14/0x20
| cleanup_module+0x18/0xeec
| __arm64_sys_delete_module+0x234/0x378
| invoke_syscall+0x40/0x108
| el0_svc_common+0xb4/0xf0
| do_el0_svc+0x30/0xa4
| el0_svc+0x2c/0x7c
| el0t_64_sync_handler+0x84/0xf0
| el0t_64_sync+0x190/0x194
Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type")
Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
|
|
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
|
|
Pull more SCSI updates from James Bottomley:
"Six late arriving patches for the merge window. Five are minor
assorted fixes and updates.
The IPR driver change removes SATA support, which will now allow a
major cleanup in the ATA subsystem because it was the only driver
still using the old attachment mechanism. The driver is only used on
power systems and SATA was used to support a DVD device, which has
long been moved to a different hba. IBM chose this route instead of
porting ipr to the newer SATA interfaces"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix use after free bug in qedi_remove()
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
scsi: ipr: Remove several unused variables
scsi: pm80xx: Log device registration
scsi: ipr: Remove SATA support
scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
|
|
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- sched: act_pedit: free pedit keys on bail from offset check
Current release - new code bugs:
- pds_core:
- Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
- fix mutex double unlock in error path
Previous releases - regressions:
- sched: cls_api: remove block_cb from driver_list before freeing
- nf_tables: fix ct untracked match breakage
- eth: mtk_eth_soc: drop generic vlan rx offload
- sched: flower: fix error handler on replace
Previous releases - always broken:
- tcp: fix skb_copy_ubufs() vs BIG TCP
- ipv6: fix skb hash for some RST packets
- af_packet: don't send zero-byte data in packet_sendmsg_spkt()
- rxrpc: timeout handling fixes after moving client call connection
to the I/O thread
- ixgbe: fix panic during XDP_TX with > 64 CPUs
- igc: RMW the SRRCTL register to prevent losing timestamp config
- dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621
- r8152:
- fix flow control issue of RTL8156A
- fix the poor throughput for 2.5G devices
- move setting r8153b_rx_agg_chg_indicate() to fix coalescing
- enable autosuspend
- ncsi: clear Tx enable mode when handling a Config required AEN
- octeontx2-pf: macsec: fixes for CN10KB ASIC rev
Misc:
- 9p: remove INET dependency"
* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
pds_core: fix mutex double unlock in error path
net/sched: flower: fix error handler on replace
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
net/sched: flower: fix filter idr initialization
net: fec: correct the counting of XDP sent frames
bonding: add xdp_features support
net: enetc: check the index of the SFI rather than the handle
sfc: Add back mailing list
virtio_net: suppress cpu stall when free_unused_bufs
ice: block LAN in case of VF to VF offload
net: dsa: mt7530: fix network connectivity with multiple CPU ports
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
9p: Remove INET dependency
netfilter: nf_tables: fix ct untracked match breakage
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
igc: read before write to SRRCTL register
pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
pds_core: remove CONFIG_DEBUG_FS from makefile
ionic: catch failure from devlink_alloc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Some more driver bugfixes and a DT binding conversion"
* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: brcm,kona-i2c: convert to YAML
i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
i2c: omap: Fix standard mode false ACK readings
i2c: tegra: Fix PEC support for SMBUS block read
|
|
There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for hibernation
- The .rela.dyn section has been moved to the init area
- A fix for the SBI probing to allow for implementation-defined
behavior
- Various other fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: include cpufeature.h in cpufeature.c
riscv: Move .rela.dyn to the init sections
dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
riscv: compat_syscall_table: Fixup compile warning
RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
RISC-V: fix sifive and thead section mismatches in errata
RISC-V: Align SBI probe implementation with spec
riscv: mm: remove redundant parameter of create_fdt_early_page_table
riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
the 6.3 cycle, that turned out to do more harm than help (Hans de
Goede)"
* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in the Intel powerclamp driver
introduced during the 6.3 cycle and update MAINTAINERS to match recent
code changes.
Specifics:
- Fix NULL pointer access in the Intel powerclamp thermal driver that
occurs on attempts to set the cooling device state to 0 in the
default configuration (Srinivas Pandruvada)
- Drop the stale MAINTAINERS entry for the Intel Menlow thermal
driver that has been removed recently (Lukas Bulwahn)"
* tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
thermal: intel: powerclamp: Fix NULL pointer access issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Fix for mediatek driver warning for variable used uninitialized and
for wrong pll math
* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: mediatek: hdmi: mt8195: fix wrong pll calculus
phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc
|
|
Pull more drm fixes from Dave Airlie:
"This is the fixes for the last couple of weeks for i915 and last 3
weeks for amdgpu, lots of them but pretty scattered around and all
pretty small.
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix"
* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
drm/amd/display: filter out invalid bits in pipe_fuses
drm/amd/display: Change default Z8 watermark values
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
drm/amdgpu: add a missing lock for AMDGPU_SCHED
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
drm/amdgpu: Enable doorbell selfring after resize FB BAR
drm/amdgpu: Use the default reset when loading or reloading the driver
drm/amdgpu: Fix mode2 reset for sienna cichlid
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
drm/i915/guc: Actually return an error if GuC version range check fails
drm/amd/display: Lowering min Z8 residency time
drm/amd/display: fix flickering caused by S/G mode
drm/amd/display: Set min_width and min_height capability for DCN30
drm/amd/display: Isolate remaining FPU code in DCN32
drm/amd/display: Update bounding box values for DCN321
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
...
|
|
The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.
Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a double unlock in an error handling path by unlocking as soon as
the error is seen and removing unlocks in the error cleanup path.
Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/
Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current xdp_xmit implementation, if any single frame fails to
transmit due to insufficient buffer descriptors, the function nevertheless
reports success in sending all frames. This results in erroneously
indicating that frames were transmitted when in fact they were dropped.
This patch fixes the issue by ensureing the return value properly
indicates the actual number of frames successfully transmitted, rather than
potentially reporting success for all frames when some could not transmit.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce xdp_features support for bonding driver according to the slave
devices attached to the master one. xdp_features is required whenever we
want to xdp_redirect traffic into a bond device and then into selected
slaves attached to it.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should check whether the current SFI (Stream Filter Instance) table
is full before creating a new SFI entry. However, the previous logic
checks the handle by mistake and might lead to unpredictable behavior.
Fixes: 888ae5a3952b ("net: enetc: add tc flower psfp offload driver")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For multi-queue and large ring-size use case, the following error
occurred when free_unused_bufs:
rcu: INFO: rcu_sched self-detected stall on CPU.
Fixes: 986a4f4d452d ("virtio_net: multiqueue support")
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback
enable bit in case of all ingress type rules added via the tc tool.
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU
port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports
are enabled, port 6 becomes the only port to forward the frames to. But
port 5 is the active port, so no frames received from the user ports will
be forwarded to port 5 which breaks network connectivity.
Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix
this issue by setting the bit that corresponds to the CPU port without
overwriting the other bits.
Clear the bits beforehand only for the MT7531 switch. According to the
documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference
Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and
UNU_FFP bits are set to 1 for MT7531, 0 for MT7530.
The commit 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user
ports") silently changed the method to set the bits on the MT7530_MFC.
Instead of clearing the relevant bits before mt7530_cpu_port_enable()
which runs under a for loop, the commit started doing it on
mt7530_cpu_port_enable().
Back then, this didn't really matter as only a single CPU port could be
used since the CPU port number was hardcoded. The driver was later changed
with commit 1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp
instead of constant") to retrieve the CPU port via dp->cpu_dp. With that,
this silent change became an issue for when using multiple CPU ports.
Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The multi-chip module MT7530 switch with a 40 MHz oscillator on the
MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using
trgmii.
This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL,
hence using the ncpo1 value, 0x0780.
My testing shows this value works on Unielec U7621-06, Bartel's testing
shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices
tested have got 40 MHz oscillators.
Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The
definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code
whilst 150 MHz PLL don't.
Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz
oscillator on the said MT7621 SoCs works fine because the ncpo1 value
defined for it is for 125 MHz PLL.
Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL
ncpo1 values for both oscillator frequencies.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195
Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support")
Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for StarFive JH7100 and JH7110 Soc
- Add Rockchip RK3588 devices
- Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices
- Add Mediatke MT8365 and MT6735 devices
- Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog
- Convert watchdog platform drivers to return void on the remove
callback
- Convert to devm_clk_get_enabled() helpers
- ... and other small fixes and improvements
* tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits)
watchdog: dw_wdt: Simplify clk management
watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
watchdog: starfive: Fix the warning of starfive_wdt_match
watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
MAINTAINERS: Add fragment for Xilinx watchdog driver
watchdog: menz069_wdt: fix timeout setting
watchdog: menz069_wdt: fix watchdog initialisation
dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
watchdog: loongson1_wdt: Implement restart handler
dt-bindings: watchdog: Document Qualcomm SM6115 watchdog
dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names
dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties
dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties
dt-bindings: watchdog: arm,sp805: drop unneeded minItems
dt-bindings: watchdog: drop duplicated GPIO watchdog bindings
dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT
drivers: watchdog: Add StarFive Watchdog driver
dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
dt-bindings: watchdog: indentation, quotes and white-space cleanup
watchdog: ebc-c384_wdt: Mark status as orphaned
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-05-03:
amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.4-2023-04-26:
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com
|
|
If cur_state for the powerclamp cooling device is set to the default
minimum state of 0, without setting first to cur_state > 0, this results
in NULL pointer access.
This NULL pointer access happens in the powercap core idle-inject
function idle_inject_set_duration() as there is no NULL check for
idle_inject_device pointer. This pointer must be allocated by calling
idle_inject_register() or idle_inject_register_full().
In the function powerclamp_set_cur_state(), idle_inject_device pointer
is allocated only when the cur_state > 0. But setting 0 without changing
to any other state, idle_inject_set_duration() will be called with a
NULL idle_inject_device pointer.
To address this, just return from powerclamp_set_cur_state() if the
current cooling device state is the same as the last one. Since the
power-up default cooling device state is 0, changing the state to 0
again here will return without calling idle_inject_set_duration().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386
Tested-by: Risto A. Paju <teknohog@iki.fi>
Cc: 6.3+ <stable@kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has
been replaced by 'div_u64'.
Fix the issue by multiplying the values in the denominator instead of
dividing them.
Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.
Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()
Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Currently uring CMD operation relies on having large SQEs, but future
operations might want to use normal SQE.
The io_uring_cmd currently only saves the payload (cmd) part of the SQE,
but, for commands that use normal SQE size, it might be necessary to
access the initial SQE fields outside of the payload/cmd block. So,
saves the whole SQE other than just the pdu.
This changes slightly how the io_uring_cmd works, since the cmd
structures and callbacks are not opaque to io_uring anymore. I.e, the
callbacks can look at the SQE entries, not only, in the cmd structure.
The main advantage is that we don't need to create custom structures for
simple commands.
Creates io_uring_sqe_cmd() that returns the cmd private data as a null
pointer and avoids casting in the callee side.
Also, make most of ublk_drv's sqe->cmd priv structure into const, and use
io_uring_sqe_cmd() to get the private structure, removing the unwanted
cast. (There is one case where the cast is still needed since the
header->{len,addr} is updated in the private structure)
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230504121856.904491-3-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Re-organize the compatible devices and add a comment to avoid unneeded
of_device_id growth with every new SoC. These devices have quite a lot
of similarities and they can use only one compatible fallback for driver
binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
mailbox driver to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/mailbox/bcm-pdc-mailbox.c:1474:34: error: ‘pdc_mbox_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/mailbox/rockchip-mailbox.c:158:34: error: ‘rockchip_mbox_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.
This issue is not theoretical. I managed to author a POC for it:
BUG: KASAN: double-free in kfree+0x5c/0xac
Free of addr ffff29280be5de00 by task poc/356
CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x64/0x80
print_report+0x188/0x48c
kasan_report_invalid_free+0xa0/0xc0
____kasan_slab_free+0x174/0x1b0
__kasan_slab_free+0x18/0x24
__kmem_cache_free+0x130/0x2e0
kfree+0x5c/0xac
mbox_test_message_write+0x208/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Allocated by task 356:
kasan_save_stack+0x3c/0x70
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x34
__kasan_kmalloc+0xb8/0xc0
kmalloc_trace+0x58/0x70
mbox_test_message_write+0x6c/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Freed by task 357:
kasan_save_stack+0x3c/0x70
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x5c
____kasan_slab_free+0x13c/0x1b0
__kasan_slab_free+0x18/0x24
__kmem_cache_free+0x130/0x2e0
kfree+0x5c/0xac
mbox_test_message_write+0x208/0x29c
full_proxy_write+0x90/0xf0
vfs_write+0x154/0x440
ksys_write+0xcc/0x180
__arm64_sys_write+0x44/0x60
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x40/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x18c/0x190
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Presently the support appears to be implied.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.
[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
