| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Current release - regressions:
- tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()
Previous releases - regressions:
- bridge: fix memory leaks when changing VLAN protocol
- dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims
- dsa: don't leak tagger-owned storage on switch driver unbind
- eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
is removed
- eth: stmmac: ensure tx function is not running in
stmmac_xdp_release()
- eth: hns3: fix return value check bug of rx copybreak
Previous releases - always broken:
- kcm: close race conditions on sk_receive_queue
- bpf: fix alignment problem in bpf_prog_test_run_skb()
- bpf: fix writing offset in case of fault in
strncpy_from_kernel_nofault
- eth: macvlan: use built-in RCU list checking
- eth: marvell: add sleep time after enabling the loopback bit
- eth: octeon_ep: fix potential memory leak in octep_device_setup()
Misc:
- tcp: configurable source port perturb table size
- bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"
* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: use struct_group to copy ip/ipv6 header addresses
net: usb: smsc95xx: fix external PHY reset
net: usb: qmi_wwan: add Telit 0x103a composition
netdevsim: Fix memory leak of nsim_dev->fa_cookie
tcp: configurable source port perturb table size
l2tp: Serialize access to sk_user_data with sk_callback_lock
net: thunderbolt: Fix error handling in tbnet_init()
net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
net: dsa: don't leak tagger-owned storage on switch driver unbind
net/x25: Fix skb leak in x25_lapb_receive_frame()
net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
bridge: switchdev: Fix memory leaks when changing VLAN protocol
net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
net: hns3: fix return value check bug of rx copybreak
net: hns3: fix incorrect hw rss hash type of rx packet
net: phy: marvell: add sleep time after enabling the loopback bit
net: ena: Fix error handling in ena_init()
kcm: close race conditions on sk_receive_queue
net: ionic: Fix error handling in ionic_init_module()
...
|
|
An external PHY needs settling time after power up or reset.
In the bind() function an mdio bus is registered. If at this point
the external PHY is still initialising, no valid PHY ID will be
read and on phy_find_first() the bind() function will fail.
If an external PHY is present, wait the maximum time specified
in 802.3 45.2.7.1.1.
Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the following Telit LE910C4-WWX composition:
0x103a: rmnet
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
kmemleak reports this issue:
unreferenced object 0xffff8881bac872d0 (size 8):
comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
hex dump (first 8 bytes):
04 00 00 00 de ad be ef ........
backtrace:
[<00000000c80b8577>] __kmalloc+0x49/0x150
[<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
[<0000000093d78e77>] full_proxy_write+0xf3/0x180
[<000000005a662c16>] vfs_write+0x1c5/0xaf0
[<000000007aabf84a>] ksys_write+0xed/0x1c0
[<000000005f1d2e47>] do_syscall_64+0x3b/0x90
[<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
nsim_dev_trap_fa_cookie_write()
kmalloc() fa_cookie
nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()
The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two trivial cleanups, and three simple fixes"
* tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/platform-pci: use define instead of literal number
xen/platform-pci: add missing free_irq() in error path
xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
xen/pcpu: fix possible memory leak in register_pcpu()
x86/xen: Use kstrtobool() instead of strtobool()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Aere is a hopefully final round of pin control fixes. Nothing special,
driver fixes and we caught a potential NULL pointer exception.
- Fix a potential NULL dereference in the core!
- Fix all pin mux routes in the Rockchop PX30 driver
- Fix the UFS pins in the Qualcomm SC8280XP driver
- Fix bias disabling in the Mediatek driver
- Fix debounce time settings in the Mediatek driver"
* tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: Export debounce time tables
pinctrl: mediatek: Fix EINT pins input debounce time configuration
pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE
pinctrl: qcom: sc8280xp: Rectify UFS reset pins
pinctrl: rockchip: list all pins in a possible mux route for PX30
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
is just a few hw-id additions)
- A couple of other hw-id / DMI-quirk additions
- A few small bug fixes + 1 build fix
* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
platform/x86: hp-wmi: Ignore Smart Experience App event
platform/surface: aggregator_registry: Add support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Pro 9
platform/surface: aggregator: Do not check for repeated unsequenced packets
platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
platform/x86/amd: pmc: Add new ACPI ID AMDI0009
platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks
|
|
A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:
insmod: ERROR: could not insert module thunderbolt-net.ko: File exists
The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.
tbnet_init()
tb_register_property_dir() # register property directory
tb_register_service_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without remove property directory
Fix by remove property directory when tb_register_service_driver() returns
error.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
and sparx5_start()
sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:
sparx_stats_init()
create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().
Fixes: af4b11022e2d ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lan966x_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:
lan966x_stats_init()
create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add module parameters to allow setting the hw_rfkill_switch and
set_fn_lock_led feature flags for testing these on laptops which are not
on the DMI-id based allow lists for these 2 flags.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com
|
|
Yoga laptops
Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.
Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sometimes hp-wmi driver complains on system resume:
[ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0
According to HP it's a feature called "HP Smart Experience App" and it's
safe to be ignored.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal HID devices (including
touchpad and keyboard) on the Surface Laptop 5.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ag71xx_open()
If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up.
And if phylink_of_phy_connect() fails, nothing needs to be done.
Compile tested only.
Fixes: 892e09153fa3 ("net: ag71xx: port to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal and type-cover HID devices
(including sensors, touchpad, keyboard, and other miscellaneous devices)
on the Surface Pro 9.
This does not include support for a tablet-mode switch yet, as that is
now handled via the POS subsystem (unlike the Surface Pro 8, where it is
handled via the KIP subsystem) and therefore needs further changes.
While we're at it, also add the missing comment for the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently, we check any received packet whether we have already seen it
previously, regardless of the packet type (sequenced / unsequenced). We
do this by checking the sequence number. This assumes that sequence
numbers are valid for both sequenced and unsequenced packets. However,
this assumption appears to be incorrect.
On some devices, the sequence number field of unsequenced packets (in
particular HID input events on the Surface Pro 9) is always zero. As a
result, the current retransmission check kicks in and discards all but
the first unsequenced packet, breaking (among other things) keyboard and
touchpad input.
Note that we have, so far, only seen packets being retransmitted in
sequenced communication. In particular, this happens when there is an
ACK timeout, causing the EC (or us) to re-send the packet waiting for an
ACK. Arguably, retransmission / duplication of unsequenced packets
should not be an issue as there is no logical condition (such as an ACK
timeout) to determine when a packet should be sent again.
Therefore, remove the retransmission check for unsequenced packets
entirely to resolve the issue.
Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models
the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE
through acer-wmi.
Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK
(these devices have no other acer-wmi based functionality).
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
|
|
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Previously, the s2idle quirk was only active for the 21A0 machine type
of the P14s Gen2a product. This also enables it for the second 21A1 type,
thus reducing wake-up times from s2idle.
Signed-off-by: Lennard Gäher <gaeher@mpi-sws.org>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2181
Link: https://lore.kernel.org/r/20221108072023.17069-1-gaeher@mpi-sws.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add new a new ACPI ID AMDI0009 used by upcoming AMD platform to the pmc
supported list of devices.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221109083346.361603-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
resetting process
Currently, if driver is in phy-imp(phy controlled by imp firmware) mode, as
driver did not update phy link ksettings after initialization process or
not update advertising when getting phy link ksettings from firmware, it
may set incorrect phy link ksettings for firmware in resetting process.
So fix it.
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cbb1e9 ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050f42b ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The refactoring of rx copybreak modifies the original return logic, which
will make this feature unavailable. So this patch fixes the return logic of
rx copybreak.
Fixes: e74a726da2c4 ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the HNS3 driver reports the rss hash type
of each packet based on the rss hash tuples set. It
always reports PKT_HASH_TYPE_L4, without checking the
type of current packet. It's incorrect.
Fixes it by reporting it base on the packet type.
Fixes: 796640778c26 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea4858670717 ("net: hns3: handle the BD info on the last BD of the packet")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sleep time is added to ensure the phy to be ready after loopback
bit was set. This to prevent the phy loopback test from failing.
Fixes: 020a45aff119 ("net: phy: marvell: add Marvell specific PHY loopback")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Signed-off-by: Aminuddin Jamaluddin <aminuddin.jamaluddin@intel.com>
Link: https://lore.kernel.org/r/20221114065302.10625-1-aminuddin.jamaluddin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ena_init() won't destroy workqueue created by
create_singlethread_workqueue() when pci_register_driver() failed.
Call destroy_workqueue() when pci_register_driver() failed to prevent the
resource leak.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20221114025659.124726-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS
checks") removed most CONFIG_DEBUG_FS checks, but there were some
left that were reported to cause compile test failures.
Remove the remaining checks, and also the unnecessary CONFIG_SUSPEND
used in the same place.
Reported-by: liyupeng@zbhlos.com
Fixes: b37fe34c8309 ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216679
Link: https://lore.kernel.org/r/20221108023323.19304-1-mario.limonciello@amd.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The kernel test robot complains that in certain combinations
when building the Mediatek drivers as modules we lack some
debounce table symbols, so export them.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration")
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Instead of "0x01" use the HVM_PARAM_CALLBACK_TYPE_PCI_INTX define from
the interface header in get_callback_via().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A problem about ionic create debugfs failed is triggered with the
following log given:
[ 415.799514] debugfs: Directory 'ionic' with parent '/' already present!
The reason is that ionic_init_module() returns ionic_bus_register_driver()
directly without checking its return value, if ionic_bus_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ionic can never be created later.
ionic_init_module()
ionic_debugfs_create() # create debugfs directory
ionic_bus_register_driver()
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when ionic_bus_register_driver() returns error.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20221113092929.19161-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDB entries that perform VXLAN encapsulation with an IPv6 underlay hold
a reference on a resource - the KVDL entry where the IPv6 underlay
destination IP is stored. For that, the driver maintains two hash tables:
1. Maps IPv6 to KVDL index
2. Maps {MAC, FID index} to IPv6 address
When a FDB entry is removed, the second table is used to find the relevant
IPv6 address and the first table is used to remove the reference count and
free the index if is not used anymore.
In order for a packet to be forwarded to a single remote VTEP, FDB
entries need to be configured at both the bridge and VXLAN devices' FDB
tables. Both entries are squashed into one {MAC, VLAN/VNI} -> IP entry
in the hardware. Therefore, in case one entry is removed, the entry will
be removed from the hardware and the remaining entry will be unmarked
with 'offload' flag since it is not offloaded anymore.
For example, the two FDB entries should be added to allow packets to be
forwarded via vx10:
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff self static dst 2001:db8:5::1
$ bridge fdb add dev vx10 aa:bb:cc:dd:ee:ff master static vlan 10
When one entry will be removed, the second one will not be offloaded
anymore. When the first entry (in VXLAN FDB) will be removed / will not be
offloaded anymore, the two mappings in IPv6 hash tables will be removed.
In case that the second entry is removed before the first one, unexpected
warnings[1][2] will be shown in user space as a result of removing the
first entry. The issue is that not offloaded entry is removed, the driver
tries to search the relevant entries in the hash tables, does not find them
and therefore warns.
Do not handle removing of not offloaded VXLAN FDB entries, as they were
already removed when the offload flag was removed.
[1]:
WARNING: CPU: 1 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c:914 mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_nve_ipv6_addr_map_del+0x6b/0x80 [mlxsw_spectrum]
...
Call Trace:
<TASK>
mlxsw_sp_port_fdb_tunnel_uc_op+0x6cf/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
[2]:
WARNING: CPU: 0 PID: 239 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3035 mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox switch, BIOS 4.6.5 05/21/2015
Workqueue: mlxsw_core_ordered mlxsw_sp_switchdev_vxlan_fdb_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x142/0x220 [mlxsw_spectrum]
...
Call Trace:
<TASK>
? mlxsw_sp_port_fdb_tun_uc_op6_sfd_write+0x5c1/0x610 [mlxsw_spectrum]
mlxsw_sp_port_fdb_tunnel_uc_op+0x6ec/0x7b0 [mlxsw_spectrum]
mlxsw_sp_switchdev_vxlan_fdb_event_work+0x17c/0x420 [mlxsw_spectrum]
? finish_task_switch.isra.0+0x8c/0x290
process_one_work+0x1cd/0x390
worker_thread+0x48/0x3c0
? process_one_work+0x390/0x390
kthread+0xe0/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 0860c7641634 ("mlxsw: spectrum_nve: Keep track of IPv6 addresses used by FDB entries")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/c186de8cbd28e3eb661e06f31f7f2f2dff30020f.1668184350.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO fixes from Alex Williamson:
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set (Anthony DeRossi)
* tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check the device set open count on reset
vfio: Export the device set open count
vfio: Fix container device registration life cycle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Placate "$VARIABLE is used uninitialized" warnings
- omap2: Add missing dependency on GPMC
- qcom: Handle ret from parse with codeword_fixup
* tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: omap2: add dependency on GPMC
mtd: rawnand: placate "$VARIABLE is used uninitialized" warnings
mtd: rawnand: qcom: handle ret from parse with codeword_fixup
|
|
The External Interrupt Controller (EINTC) on all of the supported
MediaTek SoCs does support input debouncing, but not all of them
index the debounce time values (DBNC_SETTING registers) the same way.
Before this change, in some cases, as an example, requesting a debounce
time of 16 milliseconds would mistakenly set the relative DBNC_SETTING
register to 0x2, resulting in a way shorter debounce time of 500uS.
To fix the aforementioned issue, define three different debounce_time
arrays, reflecting the correct register index for each value and for
each register index variant, and make sure that each SoC pinctrl
driver uses the right one.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
free_irq() is missing in case of error in platform_pci_probe(), fix that.
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20221114112124.1965611-1-ruanjinjie@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When Xen domain configures MSI-X, the usual approach is to enable MSI-X
together with masking all of them via the config space, then fill the
table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via
QEMU running in a stub domain.
Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the
whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE
bit too.
Note the Xen hypervisor intercepts this write anyway, and may keep the
PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the
guest-requested state and will apply it eventually.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In device_add(), dev_set_name() is called to allocate name, if it returns
error, the name need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
Fixes: f65c9bb3fb72 ("xen/pcpu: Xen physical cpus online/offline sys interface")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221110152441.401630-1-yangyingliang@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch calls free_netdev() to fix it since netdev_priv
is used after unregister.
Fixes: 13adac032982 ("net: mhi_net: Register wwan_ops for link creation")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_get_mac_addr() can fail because send mbox message failed. If this
happens, octep_dev->mac_addr will be zero. It should not continue to
initialize. Add exception handling for octep_get_mac_addr() to fix it.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When occur unsupported_dev and mbox init errors, it did not free oct->conf
and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem.
Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under
unsupported_dev and mbox init errors to fix the problem.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_get_link_status() can fail because send mbox message failed, then
octep_get_link_status() will return ret less than 0. Excute octep_link_up()
as long as ret is not equal to 0 in octep_open() now. That is not correct.
The value type of link.state is enum octep_ctrl_net_state. Positive value
represents up. Excute octep_link_up() when ret is bigger than 0.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
octep_napi_add() and octep_napi_enable() are all after
netif_set_real_num_{tx,rx}_queues() in octep_open(), so it is unnecessary
napi rollback under set_queues_err. Delete them to fix it.
Fixes: 37d79d059606 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When pci_register_driver failed, we need to remove debugfs,
which will caused a resource leak, fix it.
Resource leak logs as follows:
[ 52.184456] debugfs: Directory 'bnxt_en' with parent '/' already present!
Fixes: cabfb09d87bd ("bnxt_en: add debugfs support for DIM")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hlist_for_each_entry_rcu() has built-in RCU and lock checking.
Pass cond argument to hlist_for_each_entry_rcu() to silence false
lockdep warning when CONFIG_PROVE_RCU_LIST is enabled.
Execute as follow:
ip link add link eth0 type macvlan mode source macaddr add <MAC-ADDR>
The rtnl_lock is held when macvlan_hash_lookup_source() or
macvlan_fill_info_macaddr() are called in the non-RCU read side section.
So, pass lockdep_rtnl_is_held() to silence false lockdep warning.
Fixes: 79cf79abce71 ("macvlan: add source mode")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should not release reference by put_device() before calling device_initialize().
Fixes: e7d1d4d9ac0d ("mISDN: fix possible memory leak in mISDN_register_device()")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When liquidio driver open failed, it doesn't release resources. Compile
tested only.
Fixes: 5b07aee11227 ("liquidio: MSIX support for CN23XX")
Fixes: dbc97bfd3918 ("net: liquidio: Add missing null pointer checks")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Several libata generic code fixes for rc5:
- Add missing translation of the SYNCHRONIZE CACHE 16 scsi command as
this command is mandatory for host-managed ZBC drives.
The lack of support for it in libata-scsi was causing issues with
some passthrough applications using ZBC drives (from Shin'ichiro).
- Fix the error path of libata-transport host, port, link and device
attributes initialization (from Yingliang).
- Prevent issuing new commands to a drive that is in the NCQ error
state and undergoing recovery (From Niklas).
This bug went unnoticed for a long time as commands issued to a
drive in error state are aborted immediately and retried by the
scsi layer, hiding the useless abort-and-retry sequence"
* tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: do not issue non-internal commands once EH is pending
ata: libata-transport: fix error handling in ata_tdev_add()
ata: libata-transport: fix error handling in ata_tlink_add()
ata: libata-transport: fix error handling in ata_tport_add()
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
|
