| Age | Commit message (Collapse) | Author |
|---|
|
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight patches which looks like quite a large core change, but most of
the diffstat is reverting the attempt to rejig reference counting
introduced in the last merge window which caused issues with device
and module removal.
Of the remaining four patches, only the fix use-after-free is
substantial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix use-after-free warning
scsi: core: Fix a use-after-free
scsi: core: Revert "Make sure that targets outlive devices"
scsi: core: Revert "Make sure that hosts outlive targets"
scsi: core: Revert "Simplify LLD module reference counting"
scsi: core: Revert "Call blk_mq_free_tag_set() earlier"
scsi: lpfc: Add missing destroy_workqueue() in error path
scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 6.0-rc5.
Included in here are:
- multiple attempts to get the arch_topology code to work properly on
non-cluster SMT systems. First attempt caused build breakages in
linux-next and 0-day, second try worked.
- debugfs fixes for a long-suffering memory leak. The pattern of
debugfs_remove(debugfs_lookup(...)) turns out to leak dentries, so
add debugfs_lookup_and_remove() to fix this problem. Also fix up
the scheduler debug code that highlighted this problem. Fixes for
other subsystems will be trickling in over the next few months for
this same issue once the debugfs function is merged.
All of these have been in linux-next since Wednesday with no reported
problems"
* tag 'driver-core-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
arch_topology: Make cluster topology span at least SMT CPUs
sched/debug: fix dentry leak in update_sched_domain_debugfs
debugfs: add debugfs_lookup_and_remove()
driver core: fix driver_set_override() issue with empty strings
Revert "arch_topology: Make cluster topology span at least SMT CPUs"
arch_topology: Make cluster topology span at least SMT CPUs
|
|
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
|
|
Pull rdma fixes from Jason Gunthorpe:
"Many bug fixes in several drivers:
- Fix misuse of the DMA API in rtrs
- Several irdma issues: hung task due to SQ flushing, incorrect
capability reporting to userspace, improper error handling for MW
corners, touching an uninitialized SGL for during invalidation.
- hns was using the wrong page size limits for the HW, an incorrect
calculation of wqe_shift causing WQE corruption, and mis computed a
timer id.
- Fix a crash in SRP triggered by blktests
- Fix compiler errors by calling virt_to_page() with the proper type
in siw
- Userspace triggerable deadlock in ODP
- mlx5 could use the wrong profile due to some driver loading races,
counters were not working in some device configurations, and a
crash on error unwind"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Report RNR NAK generation in device caps
RDMA/irdma: Use s/g array in post send only when its valid
RDMA/irdma: Return correct WC error for bind operation failure
RDMA/irdma: Return error on MR deregister CQP failure
RDMA/irdma: Report the correct max cqes from query device
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/mlx5: Fix UMR cleanup on error flow of driver init
RDMA/mlx5: Set local port to one when accessing counters
RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profile
IB/core: Fix a nested dead lock as part of ODP flow
RDMA/siw: Pass a pointer to virt_to_page()
RDMA/srp: Set scmnd->result only when scmnd is not NULL
RDMA/hns: Remove the num_qpc_timer variable
RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift
RDMA/hns: Fix supported page size
RDMA/cma: Fix arguments order in net device validation
RDMA/irdma: Fix drain SQ hang with no completion
RDMA/rtrs-srv: Pass the correct number of entries for dma mapped SGL
RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg
|
|
Pull drm fixes from Dave Airlie:
"From a train in the Irish countryside, regular drm fixes for 6.0-rc5.
This is mostly amdgpu/amdkfd and i915 fixes, then one panfrost, one
ttm and one edid fix. Nothing too major going on. Hopefully a quiet
week next week for LPC.
edid:
- Fix EDID 1.4 range-descriptor parsing
ttm:
- Fix ghost-object bulk moves
i915:
- Fix MIPI sequence block copy from BIOS' table
- Fix PCODE min freq setup when GuC's SLPC is in use
- Implement Workaround for eDP
- Fix has_flat_ccs selection for DG1
amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix
amdkfd:
- Debug output fix
panfrost:
- Fix devfreq OPP"
* tag 'drm-fixes-2022-09-10' of git://anongit.freedesktop.org/drm/drm:
drm/panfrost: devfreq: set opp to the recommended one to configure regulator
drm/ttm: cleanup the resource of ghost objects after locking them
drm/amdgpu: prevent toc firmware memory leak
drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGE
drm/amdkfd: print address in hex format rather than decimal
drm/amd/display: fix memory leak when using debugfs_lookup()
drm/amd/pm: add missing SetMGpuFanBoostLimitRpm mapping for SMU 13.0.7
drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_header
drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pages
drm/i915: Implement WaEdpLinkRateDataReload
drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC
drm/i915/bios: Copy the whole MIPI sequence block
drm/ttm: update bulk move object of ghost BO
drm/edid: Handle EDID 1.4 range descriptor h/vfreq offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to test build and a fix for incorrect taint reason reporting"
* tag 'linux-kselftest-kunit-fixes-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools: Add new "test" taint to kernel-chktaint
kunit: fix Kconfig for build-in tests USB4 and Nitro Enclaves
kunit: fix assert_type for comparison macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
|
|
Replace autoloading data based on the ACPI EC device with the DMI
records for motherboards models. The ACPI method created a bug that when
this driver returns error from the probe function because of the
unsupported motherboard model, the ACPI subsystem concludes
that the EC device does not work properly.
Fixes: 5cd29012028d ("hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data")
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216412
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2121844
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220909155654.123398-2-eugene.shalygin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix MIPI sequence block copy from BIOS' table. (Ville)
- Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo)
- Implement Workaround for eDP. (Ville)
- Fix has_flat_ccs selection for DG1. (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yxn1WpmUJnJpqq23@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* edid: Fix EDID 1.4 range-descriptor parsing
* panfrost: Fix devfreq OPP
* ttm: Fix ghost-object bulk moves
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YxniKN4rK4qPp+J9@linux-uq9g
|
|
The hsync/vsync polarities were not honoured for the eDP and HDMI ports.
Add the register settings to configure the polarities as requested by the
DRM_MODE_FLAG_PHSYNC/DRM_MODE_FLAG_PVSYNC flags.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815133942.4051532-1-s.hauer@pengutronix.de
|
|
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
|
|
psb_gem_unpin() calls dma_resv_lock() but the underlying ww_mutex
gets destroyed by drm_gem_object_release() move the
drm_gem_object_release() call in psb_gem_free_object() to after
the unpin to fix the below warning:
[ 79.693962] ------------[ cut here ]------------
[ 79.693992] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 79.694015] WARNING: CPU: 0 PID: 240 at kernel/locking/mutex.c:582 __ww_mutex_lock.constprop.0+0x569/0xfb0
[ 79.694052] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer qrtr bnep ath9k ath9k_common ath9k_hw snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel ath3k snd_intel_dspcfg mac80211 snd_intel_sdw_acpi btusb snd_hda_codec btrtl btbcm btintel btmtk bluetooth at24 snd_hda_core snd_hwdep uvcvideo snd_seq libarc4 videobuf2_vmalloc ath videobuf2_memops videobuf2_v4l2 videobuf2_common snd_seq_device videodev acer_wmi intel_powerclamp coretemp mc snd_pcm joydev sparse_keymap ecdh_generic pcspkr wmi_bmof cfg80211 i2c_i801 i2c_smbus snd_timer snd r8169 rfkill lpc_ich soundcore acpi_cpufreq zram rtsx_pci_sdmmc mmc_core serio_raw rtsx_pci gma500_gfx(E) video wmi ip6_tables ip_tables i2c_dev fuse
[ 79.694436] CPU: 0 PID: 240 Comm: plymouthd Tainted: G W E 6.0.0-rc3+ #490
[ 79.694457] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 79.694469] RIP: 0010:__ww_mutex_lock.constprop.0+0x569/0xfb0
[ 79.694496] Code: ff 85 c0 0f 84 15 fb ff ff 8b 05 ca 3c 11 01 85 c0 0f 85 07 fb ff ff 48 c7 c6 30 cb 84 aa 48 c7 c7 a3 e1 82 aa e8 ac 29 f8 ff <0f> 0b e9 ed fa ff ff e8 5b 83 8a ff 85 c0 74 10 44 8b 0d 98 3c 11
[ 79.694513] RSP: 0018:ffffad1dc048bbe0 EFLAGS: 00010282
[ 79.694623] RAX: 0000000000000028 RBX: 0000000000000000 RCX: 0000000000000000
[ 79.694636] RDX: 0000000000000001 RSI: ffffffffaa8b0ffc RDI: 00000000ffffffff
[ 79.694650] RBP: ffffad1dc048bc80 R08: 0000000000000000 R09: ffffad1dc048ba90
[ 79.694662] R10: 0000000000000003 R11: ffffffffaad62fe8 R12: ffff9ff302103138
[ 79.694675] R13: ffff9ff306ec8000 R14: ffff9ff307779078 R15: ffff9ff3014c0270
[ 79.694690] FS: 00007ff1cccf1740(0000) GS:ffff9ff3bc200000(0000) knlGS:0000000000000000
[ 79.694705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 79.694719] CR2: 0000559ecbcb4420 CR3: 0000000013210000 CR4: 00000000000006f0
[ 79.694734] Call Trace:
[ 79.694749] <TASK>
[ 79.694761] ? __schedule+0x47f/0x1670
[ 79.694796] ? psb_gem_unpin+0x27/0x1a0 [gma500_gfx]
[ 79.694830] ? lock_is_held_type+0xe3/0x140
[ 79.694864] ? ww_mutex_lock+0x38/0xa0
[ 79.694885] ? __cond_resched+0x1c/0x30
[ 79.694902] ww_mutex_lock+0x38/0xa0
[ 79.694925] psb_gem_unpin+0x27/0x1a0 [gma500_gfx]
[ 79.694964] psb_gem_unpin+0x199/0x1a0 [gma500_gfx]
[ 79.694996] drm_gem_object_release_handle+0x50/0x60
[ 79.695020] ? drm_gem_object_handle_put_unlocked+0xf0/0xf0
[ 79.695042] idr_for_each+0x4b/0xb0
[ 79.695066] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 79.695095] drm_gem_release+0x1c/0x30
[ 79.695118] drm_file_free.part.0+0x1ea/0x260
[ 79.695150] drm_release+0x6a/0x120
[ 79.695175] __fput+0x9f/0x260
[ 79.695203] task_work_run+0x59/0xa0
[ 79.695227] do_exit+0x387/0xbe0
[ 79.695250] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 79.695275] ? lockdep_hardirqs_on+0x7d/0x100
[ 79.695304] do_group_exit+0x33/0xb0
[ 79.695331] __x64_sys_exit_group+0x14/0x20
[ 79.695353] do_syscall_64+0x58/0x80
[ 79.695376] ? up_read+0x17/0x20
[ 79.695401] ? lock_is_held_type+0xe3/0x140
[ 79.695429] ? asm_exc_page_fault+0x22/0x30
[ 79.695450] ? lockdep_hardirqs_on+0x7d/0x100
[ 79.695473] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 79.695493] RIP: 0033:0x7ff1ccefe3f1
[ 79.695516] Code: Unable to access opcode bytes at RIP 0x7ff1ccefe3c7.
[ 79.695607] RSP: 002b:00007ffed4413378 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 79.695629] RAX: ffffffffffffffda RBX: 00007ff1cd0159e0 RCX: 00007ff1ccefe3f1
[ 79.695644] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 79.695656] RBP: 0000000000000000 R08: ffffffffffffff80 R09: 00007ff1cd020b20
[ 79.695671] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff1cd0159e0
[ 79.695684] R13: 0000000000000000 R14: 00007ff1cd01aee8 R15: 00007ff1cd01af00
[ 79.695733] </TASK>
[ 79.695746] irq event stamp: 725979
[ 79.695757] hardirqs last enabled at (725979): [<ffffffffa9132d54>] finish_task_switch.isra.0+0xe4/0x3f0
[ 79.695780] hardirqs last disabled at (725978): [<ffffffffa9eb4113>] __schedule+0xdd3/0x1670
[ 79.695803] softirqs last enabled at (725974): [<ffffffffa90fbc9d>] __irq_exit_rcu+0xed/0x160
[ 79.695825] softirqs last disabled at (725969): [<ffffffffa90fbc9d>] __irq_exit_rcu+0xed/0x160
[ 79.695845] ---[ end trace 0000000000000000 ]---
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-3-hdegoede@redhat.com
|
|
gma_crtc_page_flip() was holding the event_lock spinlock while calling
crtc_funcs->mode_set_base() which takes ww_mutex.
The only reason to hold event_lock is to clear gma_crtc->page_flip_event
on mode_set_base() errors.
Instead unlock it after setting gma_crtc->page_flip_event and on
errors re-take the lock and clear gma_crtc->page_flip_event it
it is still set.
This fixes the following WARN/stacktrace:
[ 512.122953] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:870
[ 512.123004] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1253, name: gnome-shell
[ 512.123031] preempt_count: 1, expected: 0
[ 512.123048] RCU nest depth: 0, expected: 0
[ 512.123066] INFO: lockdep is turned off.
[ 512.123080] irq event stamp: 0
[ 512.123094] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 512.123134] hardirqs last disabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0
[ 512.123176] softirqs last enabled at (0): [<ffffffff8d0ec28c>] copy_process+0x9fc/0x1de0
[ 512.123207] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 512.123233] Preemption disabled at:
[ 512.123241] [<0000000000000000>] 0x0
[ 512.123275] CPU: 3 PID: 1253 Comm: gnome-shell Tainted: G W 5.19.0+ #1
[ 512.123304] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013
[ 512.123323] Call Trace:
[ 512.123346] <TASK>
[ 512.123370] dump_stack_lvl+0x5b/0x77
[ 512.123412] __might_resched.cold+0xff/0x13a
[ 512.123458] ww_mutex_lock+0x1e/0xa0
[ 512.123495] psb_gem_pin+0x2c/0x150 [gma500_gfx]
[ 512.123601] gma_pipe_set_base+0x76/0x240 [gma500_gfx]
[ 512.123708] gma_crtc_page_flip+0x95/0x130 [gma500_gfx]
[ 512.123808] drm_mode_page_flip_ioctl+0x57d/0x5d0
[ 512.123897] ? drm_mode_cursor2_ioctl+0x10/0x10
[ 512.123936] drm_ioctl_kernel+0xa1/0x150
[ 512.123984] drm_ioctl+0x21f/0x420
[ 512.124025] ? drm_mode_cursor2_ioctl+0x10/0x10
[ 512.124070] ? rcu_read_lock_bh_held+0xb/0x60
[ 512.124104] ? lock_release+0x1ef/0x2d0
[ 512.124161] __x64_sys_ioctl+0x8d/0xd0
[ 512.124203] do_syscall_64+0x58/0x80
[ 512.124239] ? do_syscall_64+0x67/0x80
[ 512.124267] ? trace_hardirqs_on_prepare+0x55/0xe0
[ 512.124300] ? do_syscall_64+0x67/0x80
[ 512.124340] ? rcu_read_lock_sched_held+0x10/0x80
[ 512.124377] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 512.124411] RIP: 0033:0x7fcc4a70740f
[ 512.124442] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00
[ 512.124470] RSP: 002b:00007ffda73f5390 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 512.124503] RAX: ffffffffffffffda RBX: 000055cc9e474500 RCX: 00007fcc4a70740f
[ 512.124524] RDX: 00007ffda73f5420 RSI: 00000000c01864b0 RDI: 0000000000000009
[ 512.124544] RBP: 00007ffda73f5420 R08: 000055cc9c0b0cb0 R09: 0000000000000034
[ 512.124564] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c01864b0
[ 512.124584] R13: 0000000000000009 R14: 000055cc9df484d0 R15: 000055cc9af5d0c0
[ 512.124647] </TASK>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-2-hdegoede@redhat.com
|
|
Pull VFIO fix from Alex Williamson:
- Fix zero page refcount leak (Alex Williamson)
* tag 'vfio-v6.0-rc5' of https://github.com/awilliam/linux-vfio:
vfio/type1: Unpin zero pages
|
|
VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12,
not 16-28.
Without this the output tends to have a pink hue, changing it results
in better color accuracy.
The vendor kernel doesn't use this register. However the code which
sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly
different style of registers for configuring some of the other matrices,
which do use bits 16-28 for this coefficient, but those have names
ending in MATRIX_COEF22_30, and this is not one of those.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart.menefy@mathembedded.com
|
|
VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum
value is 0x100 not 0xff.
This matches the vendor kernel.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com
|
|
SBI firmware should report total number of firmware and hardware counters
including unused ones or special ones. In this case the kernel doesn't need
to make any assumptions about gaps in reported counters, e.g. excluded timer
counter. That was fixed in OpenSBI v1.1 by commit 3f66465fb6bf ("lib: pmu:
allow to use the highest available counter"). This kernel patch has no effect
if SBI firmware behaves correctly. However it eliminates access beyond the
allocated pmu_ctr_list if the kernel is used with OpenSBI older than v1.1.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220830155306.301714-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
sensors
This issue is relevant when "intel,vm-map" is set in device-tree, and
defines a lower number of VMs than actually supported.
This change is needed for all places that use pvt->v_num or vm_num
later on in the code.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Several fixes that came in since the merge window, the major one being
a fix for the spi-mux driver which was broken by the performance
optimisations due to it peering inside the core's data structures more
than it should"
* tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi: Fix queue hang if previous transfer failed
spi: mux: Fix mux interaction with fast path optimisations
spi: cadence-quadspi: Disable irqs during indirect reads
spi: bitbang: Fix lsb-first Rx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One core fix here improving the error handling on enable failure, plus
smaller fixes for the pfuze100 drive and the SPMI DT bindings"
* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix qcom,spmi-regulator schema
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
regulator: core: Clean up on enable failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix for how we handle controller constraints on SPI message sizes,
only impacting systems with SPI controllers with very low limits like
the AMD controller used in the Steam Deck"
* tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Reserve space for register address/padding
|
|
Commit 52824ca4502d ("drm/panel-edp: Better describe eDP panel delays")
clarified the various delays used for eDP panels, tying them to the eDP
panel timing diagram.
For Innolux N116BCA-EA1, .prepare_to_enable would be:
t4_min + t5_min + t6_min + max(t7_max, t8_min)
Since t4_min and t5_min are both 0, the panel can use either .enable or
.prepare_to_enable.
As .enable is better defined, switch to using .enable for this panel.
Also add .disable = 50, based on the datasheet's t9_min value. This
effectively makes the delays the same as delay_200_500_e80_d50.
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 51d35631c970 ("drm/panel-simple: Add N116BCA-EA1")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-1-wenst@chromium.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A couple of low-priority EFI fixes:
- prevent the randstruct plugin from re-ordering EFI protocol
definitions
- fix a use-after-free in the capsule loader
- drop unused variable"
* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: capsule-loader: Fix use-after-free in efi_capsule_write
efi/x86: libstub: remove unused variable
efi: libstub: Disable struct randomization
|
|
Enabling panfrost GPU OPP with dynamic regulator will make OPP
responsible to enable and configure it.
Unfortunately OPP configure and enable the regulator when an OPP
is asked to be set, which is not the case during
panfrost_devfreq_init().
This leave the regulator unconfigured and if no GPU load is
triggered, no OPP is asked to be set which make the regulator framework
switching it off during regulator_late_cleanup() without
noticing and therefore make the board hang as any access to GPU
memory space make bus locks up.
Call dev_pm_opp_set_opp() with the recommend OPP in
panfrost_devfreq_init() to enable the regulator, this will properly
configure and enable the regulator and will avoid any switch off
by regulator_late_cleanup().
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906153034.153321-5-peron.clem@gmail.com
|
|
Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down. Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.
Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Otherwise lockdep will complain about cleaning up the bulk_move.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907100051.570641-1-christian.koenig@amd.com
Fixes: d91c411c744b ("drm/ttm: update bulk move object of ghost BO")
|
|
It's missed in psp fini.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Addresses should be printed in hex format.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up by properly
calling dput().
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: hersen wu <hersenxs.wu@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thelford Williams <tdwilliamsiv@gmail.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Yongzhi Liu <lyz_cs@pku.edu.cn>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU
13.0.7.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add missing structure to avoid incorrect size and version check.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.
This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.
So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Currently cpu_clustergroup_mask() will return CPU mask if cluster span more
or the same CPUs as cpu_coregroup_mask(). This will result topology borken
on non-Cluster SMT machines when building with CONFIG_SCHED_CLUSTER=y.
Test with:
qemu-system-aarch64 -enable-kvm -machine virt \
-net none \
-cpu host \
-bios ./QEMU_EFI.fd \
-m 2G \
-smp 48,sockets=2,cores=12,threads=2 \
-kernel $Image \
-initrd $Rootfs \
-nographic
-append "rdinit=init console=ttyAMA0 sched_verbose loglevel=8"
We'll get below error:
[ 3.084568] BUG: arch topology borken
[ 3.084570] the SMT domain not a subset of the CLS domain
Since cluster is a level higher than SMT, fix this by making cluster
spans at least SMT CPUs.
Fixes: bfcc4397435d ("arch_topology: Limit span of cpu_clustergroup_mask()")
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220905122615.12946-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Even if max hash configured in hw in mtk_ppe_hash_entry is
MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in
mtk_ppe_check_skb routine
Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine.
Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e8ae0e140c05 ("vfio: Require that devices support DMA cache
coherence") requires IOMMU drivers to advertise
IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does
not provide to userspace the ability to maintain coherency through cache
invalidations, it requires hardware coherency. Advertise the capability
in order to restore VFIO support.
The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can
enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported".
While virtio-iommu cannot enforce coherency (of PCIe no-snoop
transactions), it does support IOMMU_CACHE.
We can distinguish different cases of non-coherent DMA:
(1) When accesses from a hardware endpoint are not coherent. The host
would describe such a device using firmware methods ('dma-coherent'
in device-tree, '_CCA' in ACPI), since they are also needed without
a vIOMMU. In this case mappings are created without IOMMU_CACHE.
virtio-iommu doesn't need any additional support. It sends the same
requests as for coherent devices.
(2) When the physical IOMMU supports non-cacheable mappings. Supporting
those would require a new feature in virtio-iommu, new PROBE request
property and MAP flags. Device drivers would use a new API to
discover this since it depends on the architecture and the physical
IOMMU.
(3) When the hardware supports PCIe no-snoop. It is possible for
assigned PCIe devices to issue no-snoop transactions, and the
virtio-iommu specification is lacking any mention of this.
Arm platforms don't necessarily support no-snoop, and those that do
cannot enforce coherency of no-snoop transactions. Device drivers
must be careful about assuming that no-snoop transactions won't end
up cached; see commit e02f5c1bb228 ("drm: disable uncached DMA
optimization for ARM and arm64"). On x86 platforms, the host may or
may not enforce coherency of no-snoop transactions with the physical
IOMMU. But according to the above commit, on x86 a driver which
assumes that no-snoop DMA is compatible with uncached CPU mappings
will also work if the host enforces coherency.
Although these issues are not specific to virtio-iommu, it could be
used to facilitate discovery and configuration of no-snoop. This
would require a new feature bit, PROBE property and ATTACH/MAP
flags.
Cc: stable@vger.kernel.org
Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220825154622.86759-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With CONFIG_INTEL_IOMMU_DEBUGFS enabled, below lockdep splat are seen
when an I/O fault occurs on a machine with an Intel IOMMU in it.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0
[fault reason 0x05] PTE Write access is not set
DMAR: Dump dmar0 table entries for IOVA 0x0
DMAR: root entry: 0x0000000127f42001
DMAR: context entry: hi 0x0000000000001502, low 0x000000012d8ab001
================================
WARNING: inconsistent lock state
5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
rngd/1006 [HC1[1]:SC0[0]:HE0:SE1] takes:
ff177021416f2d78 (&k->k_lock){?.+.}-{2:2}, at: klist_next+0x1b/0x160
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xce/0x2d0
_raw_spin_lock+0x33/0x80
klist_add_tail+0x46/0x80
bus_add_device+0xee/0x150
device_add+0x39d/0x9a0
add_memory_block+0x108/0x1d0
memory_dev_init+0xe1/0x117
driver_init+0x43/0x4d
kernel_init_freeable+0x1c2/0x2cc
kernel_init+0x16/0x140
ret_from_fork+0x1f/0x30
irq event stamp: 7812
hardirqs last enabled at (7811): [<ffffffff85000e86>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (7812): [<ffffffff84f16894>] irqentry_enter+0x54/0x60
softirqs last enabled at (7794): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
softirqs last disabled at (7787): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
The klist iterator functions using spin_*lock_irq*() but the klist
insertion functions using spin_*lock(), combined with the Intel DMAR
IOMMU driver iterating over klists from atomic (hardirq) context, where
pci_get_domain_bus_and_slot() calls into bus_find_device() which iterates
over klists.
As currently there's no plan to fix the klist to make it safe to use in
atomic context, this fixes the lockdep splat by avoid calling
pci_get_domain_bus_and_slot() in the hardirq context.
Fixes: 8ac0b64b9735 ("iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()")
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Link: https://lore.kernel.org/linux-iommu/Yvo2dfpEh%2FWC+Wrr@wantstofly.org/
Link: https://lore.kernel.org/linux-iommu/YvyBdPwrTuHHbn5X@wantstofly.org/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220819015949.4795-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The per domain spinlock is acquired in iommu_flush_dev_iotlb(), which
is possbile to be called in the interrupt context. For example, the
drm-intel's CI system got completely blocked with below error:
WARNING: inconsistent lock state
6.0.0-rc1-CI_DRM_11990-g6590d43d39b9+ #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810440d678 (&domain->lock){+.?.}-{2:2}, at: iommu_flush_dev_iotlb.part.61+0x23/0x80
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0xd3/0x310
_raw_spin_lock+0x2a/0x40
domain_update_iommu_cap+0x20b/0x2c0
intel_iommu_attach_device+0x5bd/0x860
__iommu_attach_device+0x18/0xe0
bus_iommu_probe+0x1f3/0x2d0
bus_set_iommu+0x82/0xd0
intel_iommu_init+0xe45/0x102a
pci_iommu_init+0x9/0x31
do_one_initcall+0x53/0x2f0
kernel_init_freeable+0x18f/0x1e1
kernel_init+0x11/0x120
ret_from_fork+0x1f/0x30
irq event stamp: 162354
hardirqs last enabled at (162354): [<ffffffff81b59274>] _raw_spin_unlock_irqrestore+0x54/0x70
hardirqs last disabled at (162353): [<ffffffff81b5901b>] _raw_spin_lock_irqsave+0x4b/0x50
softirqs last enabled at (162338): [<ffffffff81e00323>] __do_softirq+0x323/0x48e
softirqs last disabled at (162349): [<ffffffff810c1588>] irq_exit_rcu+0xb8/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&domain->lock);
<Interrupt>
lock(&domain->lock);
*** DEADLOCK ***
1 lock held by swapper/6/0:
This coverts the spin_lock/unlock() into the irq save/restore varieties
to fix the recursive locking issues.
Fixes: ffd5869d93530 ("iommu/vt-d: Replace spin_lock_irqsave() with spin_lock()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20220817025650.3253959-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The Intel IOMMU driver possibly selects between the first-level and the
second-level translation tables for DMA address translation. However,
the levels of page-table walks for the 4KB base page size are calculated
from the SAGAW field of the capability register, which is only valid for
the second-level page table. This causes the IOMMU driver to stop working
if the hardware (or the emulated IOMMU) advertises only first-level
translation capability and reports the SAGAW field as 0.
This solves the above problem by considering both the first level and the
second level when calculating the supported page table levels.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.
The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.
The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
