summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-05-18atl2: Disable unimplemented scatter/gather featureBen Hutchings
[ Upstream commit f43bfaeddc79effbf3d0fcb53ca477cca66f3db8 ] atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18drm/i915: Bail out of pipe config compute loop on LPTDaniel Vetter
commit 2700818ac9f935d8590715eecd7e8cadbca552b6 upstream. LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit f58a1acc7e4a1f37d26124ce4c875c647fbcc61f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18drm/radeon: fix PLL sharing on DCE6.1 (v2)Lucas Stach
commit e3c00d87845ab375f90fa6e10a5e72a3a5778cd3 upstream. On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not be taken into consideration when looking for an already enabled PLL to be shared with other outputs. This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland based laptop, where the internal display is connected to UNIPHYA through a TRAVIS DP->LVDS bridge. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78987 v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop extra parameter. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18asmlinkage, pnp: Make variables used from assembler code visibleAndi Kleen
commit a99aa42d0253f033cbb85096d3f2bd82201321e6 upstream. Mark variables referenced from assembler files visible. This fixes compile problems with LTO. Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-4-git-send-email-ak@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18Input: max8997-haptic - fix NULL pointer dereferenceMarek Szyprowski
commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11Input: ads7846 - correct the value got from SPIAndrey Gelman
commit 879f2fea8a5a748bcbf98d2cdce9139c045505d3 upstream. According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il> Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11iio: ak8975: Fix NULL pointer exception on early interruptKrzysztof Kozlowski
commit 07d2390e36ee5b3265e9cc8305f2a106c8721e16 upstream. In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Fixes: 94a6d5cf7caa ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11USB: serial: cp210x: add Straizona Focusers device idsJasem Mutlaq
commit 613ac23a46e10d4d4339febdd534fafadd68e059 upstream. Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by: Jasem Mutlaq <mutlaqja@ikarustech.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11USB: serial: cp210x: add ID for Link ECUMike Manning
commit 1d377f4d690637a0121eac8701f84a0aa1e69a69 upstream. The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by: Mike Manning <michael@bsch.com.au> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11ACPICA: Dispatcher: Update thread ID for recursive method callsPrarit Bhargava
commit 93d68841a23a5779cef6fb9aa0ef32e7c5bd00da upstream. ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava <prarit@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11Input: zforce_ts - fix dual touch recognitionKnut Wohlrab
commit 6984ab1ab35f422292b7781c65284038bcc0f6a6 upstream. A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by: Knut Wohlrab <Knut.Wohlrab@de.bosch.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11lpfc: fix misleading indentationArnd Bergmann
commit aeb6641f8ebdd61939f462a8255b316f9bfab707 upstream. gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd2a1b ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11clk: versatile: sp810: support reentranceLinus Walleij
commit ec7957a6aa0aaf981fb8356dc47a2cdd01cde03c upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c4385 "clk: vexpress: Add separate SP810 driver" Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11nbd: ratelimit error msgs after socket closeDan Streetman
commit da6ccaaa79caca4f38b540b651238f87215217a2 upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542b427 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04jme: Fix device PM wakeup API usageGuo-Fu Tseng
commit 81422e672f8181d7ad1ee6c60c723aac649f538f upstream. According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04jme: Do not enable NIC WoL functions on S0Guo-Fu Tseng
commit 0772a99b818079e628a1da122ac7ee023faed83e upstream. Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04bus: imx-weim: Take the 'status' property value into accountFabio Estevam
commit 33b96d2c9579213cf3f36d7b29841b1e464750c4 upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by: Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04Drivers: hv: vmbus: prevent cpu offlining on newer hypervisorsVitaly Kuznetsov
commit e513229b4c386e6c9f66298c13fde92f73e6e1ac upstream. When an SMP Hyper-V guest is running on top of 2012R2 Server and secondary cpus are sent offline (with echo 0 > /sys/devices/system/cpu/cpu$cpu/online) the system freeze is observed. This happens due to the fact that on newer hypervisors (Win8, WS2012R2, ...) vmbus channel handlers are distributed across all cpus (see init_vp_index() function in drivers/hv/channel_mgmt.c) and on cpu offlining nobody reassigns them to CPU0. Prevent cpu offlining when vmbus is loaded until the issue is fixed host-side. This patch also disables hibernation but it is OK as it is also broken (MCE error is hit on resume). Suspend still works. Tested with WS2008R2 and WS2012R2. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> [ 3chas3@gmail.com: rebase to 3.14-stable ] Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04serial: sh-sci: Remove cpufreq notifier to fix crash/deadlockGeert Uytterhoeven
commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream. The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de2413edad1a ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update stored clock rates; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04drivers/misc/ad525x_dpot: AD5274 fix RDAC read back errorsMichael Hennerich
commit f3df53e4d70b5736368a8fe8aa1bb70c1cb1f577 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd394956f2 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04rtc: vr41xx: Wire up alarm_irq_enableGeert Uytterhoeven
commit a25f4a95ec3cded34c1250364eba704c5e4fdac4 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04rtc: hym8563: fix invalid year calculationAlexander Kochetkov
commit d5861262210067fc01b2fb4f7af2fd85a3453f15 upstream. Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04misc/bmp085: Enable building as a moduleBen Hutchings
commit 50e6315dba721cbc24ccd6d7b299f1782f210a98 upstream. Commit 985087dbcb02 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087dbcb02 ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04fbdev: da8xx-fb: fix videomodes of lcd panelsSushaanth Srirangapathi
commit 713fced8d10fa1c759c8fb6bf9aaa681bae68cad upstream. Commit 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b794f4a ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04paride: make 'verbose' parameter an 'int' againArnd Bergmann
commit dec63a4dec2d6d01346fd5d96062e67c0636852b upstream. gcc-6.0 found an ancient bug in the paride driver, which had a "module_param(verbose, bool, 0);" since before 2.6.12, but actually uses it to accept '0', '1' or '2' as arguments: drivers/block/paride/pd.c: In function 'pd_init_dev_parms': drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare] #define DBMSG(msg) ((verbose>1)?(msg):NULL) In 2012, Rusty did a cleanup patch that also changed the type of the variable to 'bool', which introduced what is now a gcc warning. This changes the type back to 'int' and adapts the module_param() line instead, so it should work as documented in case anyone ever cares about running the ancient driver with debugging. Fixes: 90ab5ee94171 ("module_param: make bool parameters really bool (drivers & misc)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Rusty Russell <rusty@rustcorp.com.au> Cc: Tim Waugh <tim@cyberelk.net> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Jens Axboe <axboe@fb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04USB: usbip: fix potential out-of-bounds writeIgnat Korchagin
commit b348d7dddb6c4fbfc810b7a0626e8ec9e29f7cbb upstream. Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by: Ignat Korchagin <ignat.korchagin@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04efi: Fix out-of-bounds read in variable_matches()Laszlo Ersek
commit 630ba0cc7a6dbafbdee43795617c872b35cde1b4 upstream. The variable_matches() function can currently read "var_name[len]", for example when: - var_name[0] == 'a', - len == 1 - match_name points to the NUL-terminated string "ab". This function is supposed to accept "var_name" inputs that are not NUL-terminated (hence the "len" parameter"). Document the function, and access "var_name[*match]" only if "*match" is smaller than "len". Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Matthew Garrett <mjg59@coreos.com> Cc: Jason Andryuk <jandryuk@gmail.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Link: http://thread.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/86906 Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callbackTony Luck
commit c4fc1956fa31003bfbe4f597e359d751568e2954 upstream. Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock preparedJavier Martinez Canillas
commit 10ff4c5239a137abfc896ec73ef3d15a0f86a16a upstream. The exynos5 I2C controller driver always prepares and enables a clock before using it and then disables unprepares it when the clock is not used anymore. But this can cause a possible ABBA deadlock in some scenarios since a driver that uses regmap to access its I2C registers, will first grab the regmap lock and then the I2C xfer function will grab the prepare lock when preparing the I2C clock. But since the clock driver also uses regmap for I2C accesses, preparing a clock will first grab the prepare lock and then the regmap lock when using the regmap API. An example of this happens on the Exynos5422 Odroid XU4 board where a s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers share the same I2C regmap. The possible deadlock is reported by the kernel lockdep: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sec_core:428:(regmap)->lock); lock(prepare_lock); lock(sec_core:428:(regmap)->lock); lock(prepare_lock); *** DEADLOCK *** Fix it by leaving the code prepared on probe and use {en,dis}able in the I2C transfer function. This patch is similar to commit 34e81ad5f0b6 ("i2c: s3c2410: fix ABBA deadlock by keeping clock prepared") that fixes the same bug in other driver for an I2C controller found in Samsung SoCs. Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04i2c: cpm: Fix build break due to incompatible pointer typesMichael Ellerman
commit 609d5a1b2b35bb62b4b3750396e55453160c2a17 upstream. Since commit ea8daa7b9784 ("kbuild: Add option to turn incompatible pointer check into error"), assignments from an incompatible pointer types have become a hard error, eg: drivers/i2c/busses/i2c-cpm.c:545:91: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type Fix the build break by converting txdma & rxdma to dma_addr_t. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: ea8daa7b9784 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffsKeerthy
commit 56b367c0cd67d4c3006738e7dc9dda9273fd2bfe upstream. pcs_parse_bits_in_pinctrl_entry uses ffs which gives bit indices ranging from 1 to MAX. This leads to a corner case where we try to request the pin number = MAX and fails. bit_pos value is being calculted using ffs. pin_num_from_lsb uses bit_pos value. pins array is populated with: pin + pin_num_from_lsb. The above is 1 more than usual bit indices as bit_pos uses ffs to compute first set bit. Hence the last of the pins array is populated with the MAX value and not MAX - 1 which causes error when we call pin_request. mask_pos is rightly calculated as ((pcs->fmask) << (bit_pos - 1)) Consequently val_pos and submask are correct. Hence use __ffs which gives (ffs(x) - 1) as the first bit set. fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04Input: gtco - fix crash on detecting device without endpointsVladis Dronov
commit 162f98dea487206d9ab79fc12ed64700667a894d upstream. The gtco driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. Also let's fix a minor coding style issue. The full correct report of this issue can be found in the public Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283385 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04crypto: ccp - Prevent information leakage on exportTom Lendacky
commit f709b45ec461b548c41a00044dba1f1b572783bf upstream. Prevent information from leaking to userspace by doing a memset to 0 of the export state structure before setting the structure values and copying it. This prevents un-initialized padding areas from being copied into the export area. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04drm/qxl: fix cursor position with non-zero hotspotJohn Keeping
commit d59a1f71ff1aeda4b4630df92d3ad4e3b1dfc885 upstream. The SPICE protocol considers the position of a cursor to be the location of its active pixel on the display, so the cursor is drawn with its top-left corner at "(x - hot_spot_x, y - hot_spot_y)" but the DRM cursor position gives the location where the top-left corner should be drawn, with the hotspot being a hint for drivers that need it. This fixes the location of the window resize cursors when using Fluxbox with the QXL DRM driver and both the QXL and modesetting X drivers. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1447845445-2116-1-git-send-email-john@metanate.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04usb: hcd: out of bounds access in for_each_companionRobert Dobrowolski
commit e86103a75705c7c530768f4ffaba74cf382910f2 upstream. On BXT platform Host Controller and Device Controller figure as same PCI device but with different device function. HCD should not pass data to Device Controller but only to Host Controllers. Checking if companion device is Host Controller, otherwise skip. Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04usb: xhci: fix wild pointers in xhci_mem_cleanupLu Baolu
commit 71504062a7c34838c3fccd92c447f399d3cb5797 upstream. This patch fixes some wild pointers produced by xhci_mem_cleanup. These wild pointers will cause system crash if xhci_mem_cleanup() is called twice. Reported-and-tested-by: Pengcheng Li <lpc.li@hisilicon.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert "usb: hub: do not clear BOS field during reset device"Greg Kroah-Hartman
commit e5bdfd50d6f76077bf8441d130c606229e100d40 upstream. This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407. Tony writes: This upstream commit is causing an oops: d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by: Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usbvision: fix crash on detecting device with invalid configurationVladis Dronov
commit fa52bd506f274b7619955917abfde355e3d19ffe upstream. The usbvision driver crashes when a specially crafted usb device with invalid number of interfaces or endpoints is detected. This fix adds checks that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usbvision: fix leak of usb_dev on failure paths in usbvision_probe()Alexey Khoroshilov
commit afd270d1a45043cef14341bcceff62ed50e8dc9a upstream. There is no usb_put_dev() on failure paths in usbvision_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20drm/radeon: hold reference to fences in radeon_sa_bo_new (3.17 and older)Nicolai Hähnle
[Backport of upstream commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb, with an additional NULL pointer guard that is required for kernels 3.17 and older. To be precise, any kernel that does *not* have commit 954605ca3 "drm/radeon: use common fence implementation for fences, v4" requires this additional NULL pointer guard.] An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1 + fix) Tested-by: Lutz Euler <lutz.euler@freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20Revert bad backport of "drm/radeon: hold reference to fences in ↵Greg Kroah-Hartman
radeon_sa_bo_new" This reverts commit 50353e6f86eb2ac46ffe3cc0b9f9a11ddc8a9410, which is commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream, as it was backported to the 3.14-stable tree incorrectly. A correct fix will happen next. Reported-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20HID: usbhid: fix inconsistent reset/resume/reset-resume behaviorAlan Stern
commit 972e6a993f278b416a8ee3ec65475724fc36feb2 upstream. The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Fraga <fragabr@gmail.com> Tested-by: Daniel Fraga <fragabr@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transferYoshihiro Shimoda
commit 6490865c67825277b29638e839850882600b48ec upstream. This patch adds a code to surely disable TX IRQ of the pipe before starting TX DMAC transfer. Otherwise, a lot of unnecessary TX IRQs may happen in rare cases when DMAC is used. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()Yoshihiro Shimoda
commit 894f2fc44f2f3f48c36c973b1123f6ab298be160 upstream. When unexpected situation happened (e.g. tx/rx irq happened while DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL pointer dereference like the followings: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 80000007 [#1] SMP ARM Modules linked in: usb_f_acm u_serial g_serial libcomposite CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63 Hardware name: Generic R8A7790 (Flattened Device Tree) task: c0729c00 ti: c0724000 task.ti: c0724000 PC is at 0x0 LR is at usbhsf_pkt_handler+0xac/0x118 pc : [<00000000>] lr : [<c03257e0>] psr: 60000193 sp : c0725db8 ip : 00000000 fp : c0725df4 r10: 00000001 r9 : 00000193 r8 : ef3ccab4 r7 : ef3cca10 r6 : eea4586c r5 : 00000000 r4 : ef19ceb4 r3 : 00000000 r2 : 0000009c r1 : c0725dc4 r0 : ef19ceb4 This patch adds a condition to avoid the dereference. Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20qmi_wwan: add "D-Link DWM-221 B1" device idBjørn Mork
[ Upstream commit e84810c7b85a2d7897797b3ad3e879168a8e032a ] Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20ppp: take reference on channels netnsGuillaume Nault
[ Upstream commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89 ] Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20qlge: Fix receive packets drop.Manish Chopra
[ Upstream commit 2c9a266afefe137bff06bbe0fc48b4d3b3cb348c ] When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20ath9k: fix buffer overrun for ar9287Arnd Bergmann
[ Upstream commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20farsync: fix off-by-one bug in fst_add_oneArnd Bergmann
[ Upstream commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 ] gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-20sh_eth: fix NULL pointer dereference in sh_eth_ring_format()Sergei Shtylyov
[ Upstream commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>