summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-07-06IB/umad: Fix use-after-free on closeBart Van Assche
commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream. Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n> triggers a use-after-free. __fput() invokes f_op->release() before it invokes cdev_put(). Make sure that the ib_umad_device structure is freed by the cdev_put() call instead of f_op->release(). This avoids that changing the port mode from IB into Ethernet and back to IB followed by restarting opensmd triggers the following kernel oops: general protection fault: 0000 [#1] PREEMPT SMP RIP: 0010:[<ffffffff810cc65c>] [<ffffffff810cc65c>] module_put+0x2c/0x170 Call Trace: [<ffffffff81190f20>] cdev_put+0x20/0x30 [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0 [<ffffffff8118e35e>] ____fput+0xe/0x10 [<ffffffff810723bc>] task_work_run+0xac/0xe0 [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0 [<ffffffff814b8398>] int_signal+0x12/0x17 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/umad: Fix error handlingBart Van Assche
commit 8ec0a0e6b58218bdc1db91dd70ebfcd6ad8dd6cd upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ydroneaud@opteya.com: rework a bit to reduce the amount of code changed] Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> [ nonseekable_open() can't actually fail, but.... - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/srp: Fix a sporadic crash triggered by cable pullingBart Van Assche
commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by: Sagi Grimberg <sagig@mellanox.com> Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/ipath: Translate legacy diagpkt into newer extended diagpktDennis Dalessandro
commit 7e6d3e5c70f13874fb06e6b67696ed90ce79bd48 upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/qib: Fix port in pkey change eventMike Marciniszyn
commit 911eccd284d13d78c92ec4f1f1092c03457d732a upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/mlx5: add missing padding at end of struct mlx5_ib_create_srqYann Droneaud
commit 43bc889380c2ad9aa230eccc03a15cc52cf710d4 upstream. The i386 ABI disagrees with most other ABIs regarding alignment of data type larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABIs struct mlx5_ib_create_srq gets implicitly padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. Tool pahole could be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name mlx5_ib_create_srq \ drivers/infiniband/hw/mlx5/mlx5_ib.o Then, structure layout can be compared between i386 and x86_64: # +++ obj-i386/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-28 11:43:07.386413682 +0100 # --- obj-x86_64/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-27 13:06:17.788472721 +0100 # @@ -69,7 +68,6 @@ struct mlx5_ib_create_srq { # __u64 db_addr; /* 8 8 */ # __u32 flags; /* 16 4 */ # # - /* size: 20, cachelines: 1, members: 3 */ # - /* last cacheline: 20 bytes */ # + /* size: 24, cachelines: 1, members: 3 */ # + /* padding: 4 */ # + /* last cacheline: 24 bytes */ # }; ABI disagreement will make an x86_64 kernel try to read past the buffer provided by an i386 binary. When boundary check will be implemented, the x86_64 kernel will refuse to read past the i386 userspace provided buffer and the uverb will fail. Anyway, if the structure lay in memory on a page boundary and next page is not mapped, ib_copy_from_udata() will fail and the uverb will fail. This patch makes create_srq_user() takes care of the input data size to handle the case where no padding was provided. This way, x86_64 kernel will be able to handle struct mlx5_ib_create_srq as sent by unpatched and patched i386 libmlx5. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Fixes: e126ba97dba9e ("mlx5: Add driver for Mellanox Connect-IB adapter") Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06IB/mlx5: add missing padding at end of struct mlx5_ib_create_cqYann Droneaud
commit a8237b32a3faab155a5dc8f886452147ce73da3e upstream. The i386 ABI disagrees with most other ABIs regarding alignment of data type larger than 4 bytes: on most ABIs a padding must be added at end of the structures, while it is not required on i386. So for most ABI struct mlx5_ib_create_cq get padded to be aligned on a 8 bytes multiple, while for i386, such padding is not added. The tool pahole can be used to find such implicit padding: $ pahole --anon_include \ --nested_anon_include \ --recursive \ --class_name mlx5_ib_create_cq \ drivers/infiniband/hw/mlx5/mlx5_ib.o Then, structure layout can be compared between i386 and x86_64: # +++ obj-i386/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-28 11:43:07.386413682 +0100 # --- obj-x86_64/drivers/infiniband/hw/mlx5/mlx5_ib.o.pahole.txt 2014-03-27 13:06:17.788472721 +0100 # @@ -34,9 +34,8 @@ struct mlx5_ib_create_cq { # __u64 db_addr; /* 8 8 */ # __u32 cqe_size; /* 16 4 */ # # - /* size: 20, cachelines: 1, members: 3 */ # - /* last cacheline: 20 bytes */ # + /* size: 24, cachelines: 1, members: 3 */ # + /* padding: 4 */ # + /* last cacheline: 24 bytes */ # }; This ABI disagreement will make an x86_64 kernel try to read past the buffer provided by an i386 binary. When boundary check will be implemented, a x86_64 kernel will refuse to read past the i386 userspace provided buffer and the uverb will fail. Anyway, if the structure lies in memory on a page boundary and next page is not mapped, ib_copy_from_udata() will fail when trying to read the 4 bytes of padding and the uverb will fail. This patch makes create_cq_user() takes care of the input data size to handle the case where no padding is provided. This way, x86_64 kernel will be able to handle struct mlx5_ib_create_cq as sent by unpatched and patched i386 libmlx5. Link: http://marc.info/?i=cover.1399309513.git.ydroneaud@opteya.com Fixes: e126ba97dba9e ("mlx5: Add driver for Mellanox Connect-IB adapter") Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06watchdog: kempld-wdt: Use the correct value when configuring the prescaler ↵gundberg
with the watchdog commit a9e0436b303e94ba57d3bd4b1fcbeaa744b7ebeb upstream. Use the prescaler index, rather than its value, to configure the watchdog. This will prevent a mismatch with the prescaler used to calculate the cycles. Signed-off-by: Per Gundberg <per.gundberg@icomera.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06watchdog: ath79_wdt: avoid spurious restarts on AR934xGabor Juhos
commit 23afeb613ec0e10aecfae7838a14d485db62ac52 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()Viresh Kumar
commit 938626d96a3ffb9eb54552bb0d3a4f2b30ffdeb0 upstream. Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06mtip32xx: Remove dfs_parent after pci unregisterAsai Thambi S P
commit af5ded8ccf21627f9614afc03b356712666ed225 upstream. In module exit, dfs_parent and it's subtree were removed before unregistering with pci. When debugfs entry for each device is attempted to remove in pci_remove() context, they don't exist, as dfs_parent and its children were already ripped apart. Modified to first unregister with pci and then remove dfs_parent. Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06mtip32xx: Increase timeout for STANDBY IMMEDIATE commandAsai Thambi S P
commit 670a641420a3d9586eebe7429dfeec4e7ed447aa upstream. Increased timeout for STANDBY IMMEDIATE command to 2 minutes. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06mtip32xx: Fix ERO and NoSnoop values in PCIe upstream on AMD systemsAsai Thambi S P
commit d1e714db8129a1d3670e449b87719c78e2c76f9f upstream. A hardware quirk in P320h/P420m interfere with PCIe transactions on some AMD chipsets, making P320h/P420m unusable. This workaround is to disable ERO and NoSnoop bits in the parent and root complex for normal functioning of these devices NOTE: This workaround is specific to AMD chipset with a PCIe upstream device with device id 0x5aXX Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06PCI: Fix incorrect vgaarb conditional in WARN_ON()Bjorn Helgaas
commit 67ebd8140dc8923c65451fa0f6a8eee003c4dcd3 upstream. 3448a19da479 "vgaarb: use bridges to control VGA routing where possible" added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the condition is never true. Replace with logical AND. Found by Coverity (CID 142811). Fixes: 3448a19da479 "vgaarb: use bridges to control VGA routing where possible" Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: David Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06PCI: Add new ID for Intel GPU "spurious interrupt" quirkThomas Jarosch
commit 7c82126a94e69bbbac586f0249e7ef11e681246c upstream. After a CPU upgrade while keeping the same mainboard, we faced "spurious interrupt" problems again. It turned out that the new CPU also featured a new GPU with a different PCI ID. Add this PCI ID to the quirk table. Probably all other Intel GPU PCI IDs are affected, too, but I don't want to add them without a test system. See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") for some history. [bhelgaas: add f67fd55fa96f reference, stable tag] Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is setHans de Goede
commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by: James Lademann <jwlademann@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: elantech - deal with clickpads reporting right button eventsHans de Goede
commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream. At least the Dell Vostro 5470 elantech *clickpad* reports right button clicks when clicked in the right bottom area: https://bugzilla.redhat.com/show_bug.cgi?id=1103528 This is different from how (elantech) clickpads normally operate, normally no matter where the user clicks on the pad the pad always reports a left button event, since there is only 1 hardware button beneath the path. It looks like Dell has put 2 buttons under the pad, one under each bottom corner, causing this. Since this however still clearly is a real clickpad hardware-wise, we still want to report it as such to userspace, so that things like finger movement in the bottom area can be properly ignored as it should be on clickpads. So deal with this weirdness by simply mapping a right click to a left click on elantech clickpads. As an added advantage this is something which we can simply do on all elantech clickpads, so no need to add special quirks for this weird model. Reported-and-tested-by: Elder Marco <eldermarco@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: synaptics - fix resolution for manually provided min/maxBenjamin Tissoires
commit d49cb7aeebb974713f9f7ab2991352d3050b095b upstream. commit 421e08c41fda fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06iscsi-target: fix iscsit_del_np deadlock on unloadMikulas Patocka
commit 81a9c5e72bdf7109a65102ca61d8cbd722cf4021 upstream. On uniprocessor preemptible kernel, target core deadlocks on unload. The following events happen: * iscsit_del_np is called * it calls send_sig(SIGINT, np->np_thread, 1); * the scheduler switches to the np_thread * the np_thread is woken up, it sees that kthread_should_stop() returns false, so it doesn't terminate * the np_thread clears signals with flush_signals(current); and goes back to sleep in iscsit_accept_np * the scheduler switches back to iscsit_del_np * iscsit_del_np calls kthread_stop(np->np_thread); * the np_thread is waiting in iscsit_accept_np and it doesn't respond to kthread_stop The deadlock could be resolved if the administrator sends SIGINT signal to the np_thread with killall -INT iscsi_np The reproducible deadlock was introduced in commit db6077fd0b7dd41dc6ff18329cec979379071f87, but the thread-stopping code was racy even before. This patch fixes the problem. Using kthread_should_stop to stop the np_thread is unreliable, so we test np_thread_state instead. If np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06iscsi-target: Explicily clear login response PDU in exception pathNicholas Bellinger
commit 683497566d48f86e04d026de1ee658dd74fc1077 upstream. This patch adds a explicit memset to the login response PDU exception path in iscsit_tx_login_rsp(). This addresses a regression bug introduced in commit baa4d64b where the initiator would end up not receiving the login response and associated status class + detail, before closing the login connection. Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06iscsi-target: Avoid rejecting incorrect ITT for Data-OutNicholas Bellinger
commit 97c99b47ac58bacb7c09e1f47d5d184434f6b06a upstream. This patch changes iscsit_check_dataout_hdr() to dump the incoming Data-Out payload when the received ITT is not associated with a WRITE, instead of calling iscsit_reject_cmd() for the non WRITE ITT descriptor. This addresses a bug where an initiator sending an Data-Out for an ITT associated with a READ would end up generating a reject for the READ, eventually resulting in list corruption. Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06target: Fix left-over se_lun->lun_sep pointer OOPsNicholas Bellinger
commit 83ff42fcce070801a3aa1cd6a3269d7426271a8d upstream. This patch fixes a left-over se_lun->lun_sep pointer OOPs when one of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua* attributes is accessed after the $DEVICE symlink has been removed. To address this bug, go ahead and clear se_lun->lun_sep memory in core_dev_unexport(), so that the existing checks for show/store ALUA attributes in target_core_fabric_configfs.c work as expected. Reported-by: Sebastian Herbszt <herbszt@gmx.de> Tested-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30efi-pstore: Fix an overflow on 32-bit buildsAndrzej Zaborowski
commit 783ee43118dc773bc8b0342c5b230e017d5a04d0 upstream. In generic_id the long int timestamp is multiplied by 100000 and needs an explicit cast to u64. Without that the id in the resulting pstore filename is wrong and userspace may have problems parsing it, but more importantly files in pstore can never be deleted and may fill the EFI flash (brick device?). This happens because when generic pstore code wants to delete a file, it passes the id to the EFI backend which reinterpretes it and a wrong variable name is attempted to be deleted. There's no error message but after remounting pstore, deleted files would reappear. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30SCSI: Fix spurious request sense in error handlingJames Bottomley
commit d555a2abf3481f81303d835046a5ec2c4fb3ca8e upstream. We unconditionally execute scsi_eh_get_sense() to make sure all failed commands that should have sense attached, do. However, the routine forgets that some commands, because of the way they fail, will not have any sense code ... we should not bother them with a REQUEST_SENSE command. Fix this by testing to see if we actually got a CHECK_CONDITION return and skip asking for sense if we don't. Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30target: Explicitly clear ramdisk_mcp backend pagesNicholas A. Bellinger
[Note that a different patch to address the same issue went in during v3.15-rc1 (commit 4442dc8a), but includes a bunch of other changes that don't strictly apply to fixing the bug] This patch changes rd_allocate_sgl_table() to explicitly clear ramdisk_mcp backend memory pages by passing __GFP_ZERO into alloc_pages(). This addresses a potential security issue where reading from a ramdisk_mcp could return sensitive information, and follows what >= v3.15 does to explicitly clear ramdisk_mcp memory at backend device initialization time. Reported-by: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Cc: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30target: Report correct response length for some commandsRoland Dreier
commit 2426bd456a61407388b6e61fc5f98dbcbebc50e2 upstream. When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iscsi: Fix sendtargets response pdu for iser transportSagi Grimberg
commit 22c7aaa57e80853b4904a46c18f97db0036a3b97 upstream. In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Slava Shwartsman <valyushash@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leakNicholas Bellinger
commit bbc050488525e1ab1194c27355f63c66814385b8 upstream. This patch fixes a iscsi_queue_req memory leak when ABORT_TASK response has been queued by TFO->queue_tm_rsp() -> lio_queue_tm_rsp() after a long standing I/O completes, but the connection has already reset and waiting for cleanup to complete in iscsit_release_commands_from_conn() -> transport_generic_free_cmd() -> transport_wait_for_tasks() code. It moves iscsit_free_queue_reqs_for_conn() after the per-connection command list has been released, so that the associated se_cmd tag can be completed + released by target-core before freeing any remaining iscsi_queue_req memory for the connection generated by lio_queue_tm_rsp(). Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30target: Use complete_all for se_cmd->t_transport_stop_compNicholas Bellinger
commit a95d6511303b848da45ee27b35018bb58087bdc6 upstream. This patch fixes a bug where multiple waiters on ->t_transport_stop_comp occurs due to a concurrent ABORT_TASK and session reset both invoking transport_wait_for_tasks(), while waiting for the associated se_cmd descriptor backend processing to complete. For this case, complete_all() should be invoked in order to wake up both waiters in core_tmr_abort_task() + transport_generic_free_cmd() process contexts. Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30target: Set CMD_T_ACTIVE bit for Task Management RequestsNicholas Bellinger
commit f15e9cd910c4d9da7de43f2181f362082fc45f0f upstream. This patch fixes a bug where se_cmd descriptors associated with a Task Management Request (TMR) where not setting CMD_T_ACTIVE before being dispatched into target_tmr_work() process context. This is required in order for transport_generic_free_cmd() -> transport_wait_for_tasks() to wait on se_cmd->t_transport_stop_comp if a session reset event occurs while an ABORT_TASK is outstanding waiting for another I/O to complete. Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Wait for proper cleanup before unloadingSagi Grimberg
commit f5ebec9629cf78eeeea4b8258882a9f439ab2404 upstream. disconnected_handler works are scheduled on system_wq. When attempting to unload, first make sure all works have cleaned up. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Improve cm events handlingSagi Grimberg
commit 88c4015fda6d014392f76d3b1688347950d7a12d upstream. There are 4 RDMA_CM events that all basically mean that the user should teardown the IB connection: - DISCONNECTED - ADDR_CHANGE - DEVICE_REMOVAL - TIMEWAIT_EXIT Only in DISCONNECTED/ADDR_CHANGE it makes sense to call rdma_disconnect (send DREQ/DREP to our initiator). So we keep the same teardown handler for all of them but only indicate calling rdma_disconnect for the relevant events. This patch also removes redundant debug prints for each single event. v2 changes: - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Fix hangs in connection teardownSagi Grimberg
commit 9d49f5e284e700576f3b65f1e28dea8539da6661 upstream. In ungraceful teardowns isert close flows seem racy such that isert_wait_conn hangs as RDMA_CM_EVENT_DISCONNECTED never gets invoked (no one called rdma_disconnect). Both graceful and ungraceful teardowns will have rx flush errors (isert posts a batch once connection is established). Once all flush errors are consumed we invoke isert_wait_conn and it will be responsible for calling rdma_disconnect. This way it can be sure that rdma_disconnect was called and it won't wait forever. This patch also removes the logout_posted indicator. either the logout completion was consumed and no problem decrementing the post_send_buf_count, or it was consumed as a flush error. no point of keeping it for isert_wait_conn as there is no danger that isert_conn will be accidentally removed while it is running. (Drop unnecessary sleep_on_conn_wait_comp check in isert_cq_rx_comp_err - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30Target/iser: Bail from accept_np if np_thread is trying to closeSagi Grimberg
commit e346ab343f4f58c12a96725c7b13df9cc2ad56f6 upstream. In case np_thread state is in RESET/SHUTDOWN/EXIT states, no point for isert to stall there as we may get a hang in case no one will wake it up later. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30bluetooth: hci_ldisc: fix deadlock conditionFelipe Balbi
commit da64c27d3c93ee9f89956b9de86c4127eb244494 upstream. LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Andreas Bießmann <andreas@biessmann.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30PM / OPP: fix incorrect OPP count handling in of_init_opp_tableChander Kashyap
commit 086abb58590a4df73e8a6ed71fd418826937cd46 upstream. In of_init_opp_table function, if a failure to add an OPP is detected, the count of OPPs, yet to be added is not updated. Fix this by decrementing this count on failure as well. Signed-off-by: Chander Kashyap <k.chander@samsung.com> Signed-off-by: Inderpal Singh <inderpal.s@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30media: saa7134: fix regression with tvtimeHans Verkuil
commit 17e7f1b515803e1a79b246688aacbddd2e34165d upstream. This solves this bug: https://bugzilla.kernel.org/show_bug.cgi?id=73361 The problem is that when you quit tvtime it calls STREAMOFF, but then it queues a bunch of buffers for no good reason before closing the file descriptor. In the past closing the fd would free the vb queue since that was part of the file handle struct. Since that was moved to the global struct that no longer happened. This wouldn't be a problem, but the extra QBUF calls that tvtime does meant that the buffer list in videobuf (q->stream) contained buffers, so REQBUFS would fail with -EBUSY. The solution is to init the list head explicitly when releasing the file descriptor and to not free the video resource when calling streamoff. The real fix will hopefully go into kernel 3.16 when the vb2 conversion is merged. Basically the saa7134 driver with the old videobuf is so full of holes it ain't funny anymore, so consider this a band-aid for kernels 3.14 and 15. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30media: radio-bcm2048: fix wrong overflow checkPali Rohár
commit 5d60122b7e30f275593df93b39a76d3c2663cfc2 upstream. This patch fixes an off by one check in bcm2048_set_region(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30media: uvcvideo: Fix clock param realtime settingOlivier Langlois
commit 3b35fc81e7ec552147a4fd843d0da0bbbe4ef253 upstream. timestamps in v4l2 buffers returned to userspace are updated in uvc_video_clock_update() which uses timestamps fetched from uvc_video_clock_decode() by calling unconditionally ktime_get_ts(). Hence setting the module clock param to realtime has no effect before this patch. This has been tested with ffmpeg: ffmpeg -y -f v4l2 -input_format yuyv422 -video_size 640x480 -framerate 30 -i /dev/video0 \ -f alsa -acodec pcm_s16le -ar 16000 -ac 1 -i default \ -c:v libx264 -preset ultrafast \ -c:a libfdk_aac \ out.mkv and inspecting the v4l2 input starting timestamp. Signed-off-by: Olivier Langlois <olivier@trillion01.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30ACPI: Fix conflict between customized DSDT and DSDT local copyLv Zheng
commit 73577d1df8e1f31f6b1a5eebcdbc334eb0330e47 upstream. This patch fixes the following issue: If DSDT is customized, no local DSDT copy is needed. References: https://bugzilla.kernel.org/show_bug.cgi?id=69711 Signed-off-by: Enrico Etxe Arte <goitizena.generoa@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30ACPICA: utstring: Check array index bound before use.David Binderman
commit 5d42b0fa25df7ef2f575107597c1aaebe2407d10 upstream. ACPICA BZ 1077. David Binderman. References: https://bugs.acpica.org/show_bug.cgi?id=1077 Signed-off-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30ACPI: add dynamic_debug supportBjørn Mork
commit 45fef5b88d1f2f47ecdefae6354372d440ca5c84 upstream. Commit 1a699476e258 ("ACPI / hotplug / PCI: Hotplug notifications from acpi_bus_notify()") added debug messages for a few common events. These debug messages are unconditionally enabled if CONFIG_DYNAMIC_DEBUG is defined, contrary to the documented meaning, making the ACPI system spew lots of unwanted noise on any kernel with dynamic debugging. The bug was introduced by commit fbfddae69657 ("ACPI: Add acpi_handle_<level>() interfaces"), which added the CONFIG_DYNAMIC_DEBUG dependency without respecting its meaning. Fix by adding real support for dynamic_debug. Fixes: fbfddae69657 ("ACPI: Add acpi_handle_<level>() interfaces") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30media: stk1160: Avoid stack-allocated buffer for control URBsEzequiel Garcia
commit 85ac1a1772bb41da895bad83a81f6a62c8f293f6 upstream. Currently stk1160_read_reg() uses a stack-allocated char to get the read control value. This is wrong because usb_control_msg() requires a kmalloc-ed buffer. This commit fixes such issue by kmalloc'ating a 1-byte buffer to receive the read value. While here, let's remove the urb_buf array which was meant for a similar purpose, but never really used. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30media: ivtv: Fix Oops when no firmware is loadedTakashi Iwai
commit deb29e90221a6d4417aa67be971613c353180331 upstream. When ivtv PCM device is accessed at the state where no firmware is loaded, it oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [<ffffffffa049a881>] try_mailbox.isra.0+0x11/0x50 [ivtv] Call Trace: [<ffffffffa049aa20>] ivtv_api_call+0x160/0x6b0 [ivtv] [<ffffffffa049af86>] ivtv_api+0x16/0x40 [ivtv] [<ffffffffa049b10c>] ivtv_vapi+0xac/0xc0 [ivtv] [<ffffffffa049d40d>] ivtv_start_v4l2_encode_stream+0x19d/0x630 [ivtv] [<ffffffffa0530653>] snd_ivtv_pcm_capture_open+0x173/0x1c0 [ivtv_alsa] [<ffffffffa04526f1>] snd_pcm_open_substream+0x51/0x100 [snd_pcm] [<ffffffffa0452853>] snd_pcm_open+0xb3/0x260 [snd_pcm] [<ffffffffa0452a37>] snd_pcm_capture_open+0x37/0x50 [snd_pcm] [<ffffffffa033f557>] snd_open+0xa7/0x1e0 [snd] [<ffffffff8118a628>] chrdev_open+0x88/0x1d0 [<ffffffff811840be>] do_dentry_open+0x1de/0x270 [<ffffffff81193a73>] do_last+0x1c3/0xec0 [<ffffffff81194826>] path_openat+0xb6/0x670 [<ffffffff81195b65>] do_filp_open+0x35/0x80 [<ffffffff81185449>] do_sys_open+0x129/0x210 [<ffffffff815b782d>] system_call_fastpath+0x1a/0x1f This patch adds the check of firmware at PCM open callback like other open callbacks of this driver. Bugzilla: https://apibugzilla.novell.com/show_bug.cgi?id=875440 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30USB: serial: fix potential runtime pm imbalance at device removeJohan Hovold
commit c14829fad88dbeda57253590695b85ba51270621 upstream. Only call usb_autopm_put_interface() if the corresponding usb_autopm_get_interface() was successful. This prevents a potential runtime PM counter imbalance should usb_autopm_get_interface() fail. Note that the USB PM usage counter is reset when the interface is unbound, but that the runtime PM counter may be left unbalanced. Also add comment on why we don't need to worry about racing resume/suspend on autopm_get failures. Fixes: d5fd650cfc7f ("usb: serial: prevent suspend/resume from racing against probe/remove") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30usb: qcserial: add additional Sierra Wireless QMI devicesAleksander Morgado
commit 0ce5fb58564fd85aa8fd2d24209900e2e845317b upstream. A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Link: http://marc.info/?l=linux-usb&m=140136310027293&w=2 Cc: <stable@vger.kernel.org> # backport in link above Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30usb: qcserial: add Netgear AirCard 341UAleksander Morgado
commit ff1fcd50bc2459744e6f948310bc18eb7d6e8c72 upstream. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30USB: sierra: fix remote wakeupJohan Hovold
commit 80cc0fcbdaeaf10d04ba27779a2d7ceb73d2717a upstream. Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30USB: sierra: fix urb and memory leak on disconnectJohan Hovold
commit 014333f77c0b71123d6ef7d31a9724e0699c9548 upstream. The delayed-write queue was never emptied on disconnect, something which would lead to leaked urbs and transfer buffers if the device is disconnected before being runtime resumed due to a write. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-30USB: sierra: fix urb and memory leak in resume error pathJohan Hovold
commit 7fdd26a01eb7b6cb6855ff8f69ef4a720720dfcb upstream. Neither the transfer buffer or the urb itself were released in the resume error path for delayed writes. Also on errors, the remainder of the queue was not even processed, which leads to further urb and buffer leaks. The same error path also failed to balance the outstanding-urb counter, something which results in degraded throughput or completely blocked writes. Fix this by releasing urb and buffer and balancing counters on errors, and by always processing the whole queue even when submission of one urb fails. Fixes: e6929a9020ac ("USB: support for autosuspend in sierra while online") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>