summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2009-10-22USB: Fix throttling in generic usbserial driverJoris van Rantwijk
commit 63a9609513007537a0b23ac511fd73f9bd609ea0 upstream. The generic usbserial driver in Linux 2.6.31 halts its receiving channel in response to throttle requests from the line discipline. Unfortunately it drops the contents of the first URB received after throttling takes effect. This patch corrects that problem. Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: cp210x: Add support for the DW700 UARTÉric Piel
commit 6f88139eb9eae8003683689f93402264a73fb754 upstream. In the Dell inspiron mini 10, the GPS is connected via a cp2102. This patch adds detection of this USB device. (I haven't managed to use the GPS under Linux yet, though) Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: ipaq: fix oops when device is plugged inAlan Stern
commit 06bad89da686f6323e95cf925105e8cf88d87caf upstream. This patch (as1293) fixes a problem with the ipaq serial driver. It tries to bind to all the interfaces, even those that don't have enough endpoints. The symptom is an invalid memory reference and oops when the device is plugged in. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Matthias Geissert <geissert@mathematik.tu-darmstadt.de> Tested-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: option: Toshiba G450 device idPeter Magdina
commit 75f47214f90e996eb184eb6e6b0e8b817999c8f7 upstream. Signed-off-by: Peter Magdina <peter@magdina.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: serial: don't call release without attachAlan Stern
commit a4720c650b68a5fe7faed2edeb0ad12645f7ae63 upstream. This patch (as1295) fixes a recently-added bug in the USB serial core. If certain kinds of errors occur during probing, the core may call a serial driver's release method without previously calling the attach method. This causes some drivers (io_ti in particular) to perform an invalid memory access. The patch adds a new flag to keep track of whether or not attach has been called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: digi_acceleport: Fix broken unthrottle.Johan Hovold
commit ba6b702f85a61561d329c4c11d3ed95604924f9a upstream. This patch fixes a regression introduced in 39892da44b21b5362eb848ca424d73a25ccc488f. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: pl2303: fix error characters not being reported to ldiscJohan Hovold
commit 9388e2e71a51fab0aa2309bbb45e8a23d89a95a9 upstream. Fix regression introduced by commit d4fc4a7bfc2dee626f4fec1e209e58eaa4312de6 (tty: Fix the PL2303 private methods for sysrq). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: ftdi_sio: re-implement read processingJohan Hovold
commit cc01f17d5cb8ac604108515735aeca72e17944c1 upstream. - Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: ftdi_sio: clean up read completion handlerJohan Hovold
commit e63e278b4d2d867893962d3c7cd13a3a24ceb3f1 upstream. Remove superfluous error checks in completion handler: - No need to check private data and urb pointers as we check urb-status before dereferencing priv (which is not freed until urb has been killed on close). - No need to check tty as it is checked again when processing. - No need to check urb->number_of_packets on bulk urb. Note that both private data and tty are checked again before processing (possibly from work queue which also is cancelled on close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: ftdi_sio: remove unused rx_byte counterJohan Hovold
commit 63b0061246b54b849da8f189ae048e8110d8ce7d upstream. Remove unused rx_byte counter which is never exposed as noted by Alan Cox. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-22USB: ftdi_sio: remove tty->low_latencyJohan Hovold
commit 0cbd81a9f6bac734ac3266687bf027af1e395270 upstream. Fixes tty_flip_buffer_push being called from hard interrupt context with low_latency set. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB serial: update the console driverAlan Stern
commit 7bd032dc2793afcbaf4a350056768da84cdbd89b upstream. This patch (as1292) modifies the USB serial console driver, to make it compatible with the recent changes to the USB serial core. The most important change is that serial->disc_mutex now has to be unlocked following a successful call to usb_serial_get_by_index(). Other less notable changes include: Use the requested port number instead of port 0 always. Prevent the serial device from being autosuspended. Use the ASYNCB_INITIALIZED flag bit to indicate when the port hardware has been initialized. In spite of these changes, there's no question that the USB serial console code is still a big hack. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: straighten out serial_openAlan Stern
commit 320348c8d5c9b591282633ddb8959b42f7fc7a1c upstream. This patch (as1291) removes a bunch of code from serial_open(), things that were rendered unnecessary by earlier patches. A missing spinlock is added to protect port->port.count, which needs to be incremented even if the open fails but not if the tty has gotten a hangup. The test for whether the hardware has been initialized, based on the use count, is replaced by a more transparent test of the ASYNCB_INITIALIZED bit in the port flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: add missing tests and debug linesAlan Stern
commit ff8324df1187b7280e507c976777df76c73a1ef1 upstream. This patch (as1290) adds some missing tests. serial_down() isn't supposed to do anything if the hardware hasn't been initialized, and serial_close() isn't supposed to do anything if the tty has gotten a hangup (because serial_hangup() takes care of shutting down the hardware). The patch also updates and adds a few debugging lines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: rename subroutinesAlan Stern
commit 74556123e034c8337b69a3ebac2f3a5fc0a97032 upstream. This patch (as1289) renames serial_do_down() to serial_down() and serial_do_free() to serial_release(). It also adds a missing call to tty_shutdown() in serial_release(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: fix termios initialization logicAlan Stern
commit 7e29bb4b779f4f35385e6f21994758845bf14d23 upstream. This patch (as1288) fixes the initialization logic in serial_install(). A new tty always needs to have a termios initialized no matter what, not just in the case where the lower driver will override the termios settings. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: acquire references when a new tty is installedAlan Stern
commit cc56cd0157753c04a987888a2f793803df661a40 upstream. This patch (as1287) makes serial_install() be reponsible for acquiring references to the usb_serial structure and the driver module when a tty is first used. This is more sensible than having serial_open() do it, because a tty can be opened many times whereas it is installed only once, when it is created. (Not to mention that these actions are reversed when the tty is released, not when it is closed.) Finally, it is at install time that the TTY core takes its own reference to the usb_serial module, so it is only fitting that we should act the same way in regard to the lower-level serial driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: change logic of serial lookupsAlan Stern
commit 8bc2c1b2daf95029658868cb1427baea2da87139 upstream. This patch (as1286) changes usb_serial_get_by_index(). Now the routine will check whether the serial device has been disconnected; if it has then the return value will be NULL. If the device hasn't been disconnected then the routine will return with serial->disc_mutex held, so that the caller can use the structure without fear of racing against driver unloads. This permits the scope of table_mutex in destroy_serial() to be reduced. Instead of protecting the entire function, it suffices to protect the part that actually uses serial_table[], i.e., the call to return_serial(). There's no longer any danger of the refcount being incremented after it reaches 0 (which was the reason for having the large scope previously), because it can't reach 0 until the serial device has been disconnected. Also, the patch makes serial_install() check that serial is non-NULL before attempting to use it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: put subroutines in logical orderAlan Stern
commit f5b0953a89fa3407fb293cc54ead7d8feec489e4 upstream. This patch (as1285) rearranges the subroutines in usb-serial.c concerned with tty lifetimes into a more logical order: install, open, hangup, close, release. It also updates the formatting of the kerneldoc comments. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usb-serial: change referencing of port and serial structuresAlan Stern
commit 41bd34ddd7aa46dbc03b5bb33896e0fa8100fe7b upstream. This patch (as1284) changes the referencing of the usb_serial and usb_serial_port structures in usb-serial.c. It's not feasible to make the port structures keep a reference to the serial structure, because the ports need to remain in existence when serial is released -- quite a few of the drivers expect this. Consequently taking a reference to the port when the device file is open is insufficient; such a reference would not pin serial. To fix this, we now take a reference to serial when the device file is opened. The final put_device() for the ports occurs in destroy_serial(), so that the ports will last as long as they are needed. The patch initializes all the port devices, including those in the unused "fake" ports. This makes the code more uniform because they can all be released in the same way. The error handling code in usb_serial_probe() is much simplified by this approach; instead of freeing everything by hand we can use a single usb_serial_put() call. Also simplified is the port-release mechanism. Instead of being two separate routines, port_release() and port_free() can be combined into one. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05tty: USB serial termios bitsAlan Cox
commit fe1ae7fdd2ee603f2d95f04e09a68f7f79045127 upstream. Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05tty: USB can now use the shutdown method for kref based freeing of portsAlan Cox
commit 4455e344959a217ffc28de2ab1af87541322b343 upstream. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05tty: USB hangup is racyAlan Cox
commit d2b391822a11302add9e46476f3da4e18e6de84c upstream. The USB layer uses tty_hangup to deal with unplugs of the physical hardware (analogous to loss of carrier) and then frees the resources. However the tty_hangup is asynchronous. As the hangup can sleep we can use tty_vhangup which is the non async version to avoid freeing resources too early. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: serial: pl2303: new hardware support - sanwa multimeterPawel Ludwikow
commit 35904e6b5106fda51b04c8b8080c04466865415f upstream. I'd like to present my small patch enabling to use Sanwa PC5000 mulitimeter with linux. Signed-off-by: Pawel Ludwikow <pludwiko@rab.ict.pwr.wroc.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05tty: remove dtr/rts use from the driver open methodsAlan Cox
commit 9a68e39d4a701fb3be03cae9b462408664ebd205 upstream. These are handled by the tty_port core code which will raise and lower the carrier correctly in tty_wait_until_ready Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: serial: ftdi: handle gnICE+ JTAG adaptorsMichael Hennerich
commit 11eaf170363d264ff587f300e41c927ba5a33967 upstream. Detect the UART on interface1 and blacklist interface0 (as that is the JTAG port). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: add PIDs for FTDI based OpenDCC hardwaremail@rainerkeller.de
commit ec3815c3e14dc68d49428e6505ae99e86e5dd067 upstream. Some devices from the OpenDCC project are missing in the list of the FTDI PIDs. These PIDs are listed at http://www.opendcc.de/elektronik/usb/opendcc_usb.html (Sorry for the german only page.) This patch adds the three missing devices. Signed-off-by: Rainer Keller <mail@rainerkeller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: serial: ftdi_sio: new hardware support - hameg power supplyPawel Ludwikow
commit e7d7fcc09ebde1ea1773521ecab5a3f0ad6bef6e upstream. I'd like to present my small patch enabling to use Hameg HM8143 programmable power supply with linux. Signed-off-by: Pawel Ludwikow <pludwiko@rab.ict.pwr.wroc.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: option: TELIT UC864G supportManuel Lauss
commit ce60c48871d2b3a15ab3fa2450e783bebb4ae407 upstream. Add ID for Telit UC-864G GPS/UMTS/WCDMA modem and GPS receiver to the option driver. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05USB: option.c Add support for ZTE AC2726 EVDO modemHuzaifa Sidhpurwala
commit a67d8e6c1e49dc919c9d5480583fad8a46fc00aa upstream. A few days ago i got the latest ZTE EVDO modem shown at: http://img.alibaba.com/photo/240150115/ZTE_AC2726_EVDO_USB_Data_Modem.jpg It seems that the latest kernel does not have support for it. I wrote a small patch for the options.c module to add the relevant usb ids to it. From: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07USB: ftdi_sio: add product_id for Marvell OpenRD Base, ClientDhaval Vasa
reference: http://www.open-rd.org Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial ↵Marko Hänninen
converter cable Attached patch adds USB vendor and product IDs for Bayer's USB to serial converter cable used by Bayer blood glucose meters. It seems to be a FT232RL based device and works without any problem with ftdi_sio driver when this patch is applied. See: http://winglucofacts.com/cables/ Signed-off-by: Marko Hänninen <bugitus@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-07USB: pl2303: New vendor and product idKhanh-Dang Nguyen Thu Lam
I am submitting a patch for the pl2303 driver. This patch adds support for the "Sony QN-3USB" cable (vendor=0x054c, product=0x0437). This USB cable is a so-called data cable used to connect a Sony mobile phone to a computer. Supported models are Sony CMD-J5, J6, J7, J16, J26, J70 and Z7. I have used this patch with my Sony CMD-J70 for several days and I haven't encountered any kernel/hardware issue. From: Khanh-Dang Nguyen Thu Lam <kdntl@yahoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: option.c to support Alcatel X060S/X200 broadband modemsJavier Martin
Added support for the Alcatel X060S/X200 broadband modems to the option driver. The device starts in cd-rom emulation mode (1bbb:f000) and requires the use of the usb_modeswitch tool to switch it to modem mode (1bbb:0000). Signed-off-by: Javier Martin <jmartinj@iname.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: serial: option: Add ZTE AC8710 usb modem device.Peng Huang
Signed-off-by: Peng Huang <shawn.p.huang@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: aten uc2324 is really a moschip 7840Russell Lang
I've opened up the case, and the chips in the ATEN UC2324 are: Moschip MCS7840CV-AA 69507-6B1 0650 (USB to 4-port serial) (logo with AF kerned together) 0748 24BC02 SINGLP (unknown 8-pin chip) (logo looks like 3 or Z in circle) ZT3243LEEA 0752 B7A16420.T (4 chips, so this will be RS232 line driver) (Probably equivalent of Sipex SP3243) So the ATEN 2324 (aten2011.c driver), is definitely the Moschip 7840, and should use the mos7840.c driver. I expect you will remove the aten2011.c driver from the staging area. From the aten2011.c source code, the device ID for the UC2322 (2 port serial) is 0x7820, just like the Moschip evaluation board. This value should be added to the device id table of mos7840.c. Here's a patch that adds these devices to the driver. From: Russell Lang <gsview@ghostgum.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: option: Add USB ID for Novatel MC727/U727/USB727 refreshTim Gardner
BugLink: https://bugs.launchpad.net/bugs/365291 Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: option: add ZTE device ids and remove ONDA idsHerton Ronaldo Krzesinski
Current listed Onda ids are ZTE devices. Replace them with ZTE id define and add more ZTE device ids. Also remove 19d2:2000, this is the id when device is first plugged in and is a CD-only device, before the switch using eject. These changes are based on a previous patch by Ming Zhao <zhao.ming9@zte.com.cn> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Cc: Ming Zhao <zhao.ming9@zte.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: CP210x Add new device IDsCraig Shelley
Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: ftdi_sio: Add support for GN Otometrics Aurical USB AudiometerVille Sundberg
The patch adds support for the GN Otometrics Aurical USB Audiometer (FT232BM-based). A new VID and a new PID is added. Signed-off-by: Ville Sundberg <vsundber@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: let the option driver compile without CONFIG_PMOliver Neukum
This is needed for compilation without CONFIG_PM. Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28USB: option: Remove unused variableCarlos R. Mafra
After commit f092c240494f2d807401d93f95f683909b90af96 ("USB: option: remove unnecessary and erroneous code") the variable 'serial' becomes unused, as gcc-4.3.2 points out: drivers/usb/serial/option.c: In function 'option_instat_callback': drivers/usb/serial/option.c:834: warning: unused variable 'serial' drivers/usb/serial/option.c: In function 'option_open': drivers/usb/serial/option.c:930: warning: unused variable 'serial' So I removed it. Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-27usb_serial: Fix remaining ref count/lock bugsAlan Cox
This fixes - locking bug that was hidden by ecc2e05e739c30870c8e4f252b63a0c4041f2724 - Regression #13821 - Spurious warning when closing and blocking for data write out With these changes my PL2303 always ends up as ttyUSB0 when it should and the module refcounts stay correct. I'll do a more wholesale split & tidy of _open in the next release or two as we get a standard tty_port_open and port->ops->init port->ops->shutdown call backs. Copy sent to Alan Stern and Carlos Mafra just to confirm it fixes all the reports but it passes local testing with the same hardware as Alan Stern. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-27tty: Fix a USB serial crash/scribbleAlan Cox
The port lock is used to protect the port state. However the port structure is freed on a hangup, then the lock taken on a close. The right fix is to drop the port on tty->shutdown() but we can't yet do that due to sleep v non-sleeping rules. Instead do the next best thing and fix it up when we are not in -rc season. Reported-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Alan Cox <alan@linux.intel.com> Tested-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-20tty: fix chars_in_buffersAlan Cox
This function does not have an error return and returning an error is instead interpreted as having a lot of pending bytes. Reported by Jeff Harris who provided a list of some of the remaining offenders. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits) USB: otg: fix module reinsert issue USB: handle zero-length usbfs submissions correctly USB: EHCI: report actual_length for iso transfers USB: option: remove unnecessary and erroneous code USB: cypress_m8: remove invalid Clear-Halt USB: musb_host: undo incorrect change in musb_advance_schedule() USB: fix LANGID=0 regression USB: serial: sierra driver id_table additions USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. USB: fix race leading to a write after kfree in usbfs USB: Sierra: fix oops upon device close USB: option.c: add A-Link 3GU device id USB: Serial: Add support for Arkham Technology adapters USB: Fix option_ms regression in 2.6.31-rc2 USB: gadget audio: select SND_PCM USB: ftdi: support NDI devices Revert USB: usbfs: deprecate and hide option for !embedded USB: usb.h: fix kernel-doc notation USB: RNDIS gadget, fix issues talking from PXA USB: serial: FTDI with product code FB80 and vendor id 0403 ...
2009-07-12USB: option: remove unnecessary and erroneous codeAlan Stern
This patch (as1264) removes a bunch of unnecessary and erroneous stuff from the option USB-serial driver. Clearly there's no need to verify that the device pointer stored in the URBs is right or to store the same pointer over again. After all, the pointer can't change once it has been set up. There's also no need to call usb_clear_halt for the IN endpoint multiple times -- in fact, doing so is an error since every time after the first there will be active URBs queued for that endpoint. Since the Clear-Halts don't appear to be needed at all, the patch simply removes them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: cypress_m8: remove invalid Clear-HaltAlan Stern
This patch (as1265) removes an erroneous call to usb_clear_halt from the cypress_m8 driver. The call isn't valid because it is made from interrupt context whereas usb_clear_halt is a blocking routine. Presumably the code has never been executed; if it did it would cause an oops. So instead treat -EPIPE like any other sort of unexplained error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB: serial: sierra driver id_table additionsElina Pasheva
- Updated the id_table with all devices that Sierra Wireless currently support - Re-ordered the contents of the id_table for better readability Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-12USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.Krzysztof Halasa
Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>