summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2
AgeCommit message (Collapse)Author
2021-02-08Merge 5.11-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05usb: dwc2: Fix endpoint direction check in ep_from_windexHeiko Stuebner
dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve the endpoint for the index provided in the wIndex request param. In a test-case with a rndis gadget running and sending a malformed packet to it like: dev.ctrl_transfer( 0x82, # bmRequestType 0x00, # bRequest 0x0000, # wValue 0x0001, # wIndex 0x00 # wLength ) it is possible to cause a crash: [ 217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS [ 217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088 ... [ 218.313189] Call trace: [ 218.330217] ep_from_windex+0x3c/0x54 [ 218.348565] usb_gadget_giveback_request+0x10/0x20 [ 218.368056] dwc2_hsotg_complete_request+0x144/0x184 This happens because ep_from_windex wants to compare the endpoint direction even if index_to_ep() didn't return an endpoint due to the direction not matching. The fix is easy insofar that the actual direction check is already happening when calling index_to_ep() which will return NULL if there is no endpoint for the targeted direction, so the offending check can go away completely. Fixes: c6f5c050e2a7 ("usb: dwc2: gadget: add bi-directional endpoint support") Cc: stable@vger.kernel.org Reported-by: Gerhard Klostermeier <gerhard.klostermeier@syss.de> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04usb: dwc2: pci: Drop the empty quirk functionHeikki Krogerus
The function dwc2_pci_quirks() does nothing. Removing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20210204141711.53775-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26usb: dwc2: Make "trimming xfer length" a debug messageGuenter Roeck
With some USB network adapters, such as DM96xx, the following message is seen for each maximum size receive packet. dwc2 ff540000.usb: dwc2_update_urb_state(): trimming xfer length This happens because the packet size requested by the driver is 1522 bytes, wMaxPacketSize is 64, the dwc2 driver configures the chip to receive 24*64 = 1536 bytes, and the chip does indeed send more than 1522 bytes of data. Since the event does not indicate an error condition, the message is just noise. Demote it to debug level. Fixes: 7359d482eb4d3 ("staging: HCD files for the DWC2 driver") Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210113112052.17063-4-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26usb: dwc2: Abort transaction after errors with unknown reasonGuenter Roeck
In some situations, the following error messages are reported. dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021 This is sometimes followed by: dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length and then: WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913 dwc2_assign_and_init_hc+0x98c/0x990 The warning suggests that an odd buffer address is to be used for DMA. After an error is observed, the receive buffer may be full (urb->actual_length >= urb->length). However, the urb is still left in the queue unless three errors were observed in a row. When it is queued again, the dwc2 hcd code translates this into a 1-block transfer. If urb->actual_length (ie the total expected receive length) is not DMA-aligned, the buffer pointer programmed into the chip will be unaligned. This results in the observed warning. To solve the problem, abort input transactions after an error with unknown cause if the entire packet was already received. This may be a bit drastic, but we don't really know why the transfer was aborted even though the entire packet was received. Aborting the transfer in this situation is less risky than accepting a potentially corrupted packet. With this patch in place, the 'ChHltd set' and 'trimming xfer length' messages are still observed, but there are no more transfer attempts with odd buffer addresses. Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better") Cc: Boris ARZUR <boris@konbu.org> Cc: Douglas Anderson <dianders@chromium.org> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26usb: dwc2: Do not update data length if it is 0 on inbound transfersGuenter Roeck
The DWC2 documentation states that transfers with zero data length should set the number of packets to 1 and the transfer length to 0. This is not currently the case for inbound transfers: the transfer length is set to the maximum packet length. This can have adverse effects if the chip actually does transfer data as it is programmed to do. Follow chip documentation and keep the transfer length set to 0 in that situation. Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver") Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20210113112052.17063-2-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: dwc2: disable Link Power Management on STM32MP15 HS OTGAmelie Delaunay
Link Power Management (LPM) on STM32MP15 OTG HS encounters instabilities with some Host controllers. OTG core fails to exit L1 state in 200us: "dwc2 49000000.usb-otg: Failed to exit L1 sleep state in 200us." Then the device is still not enumerated. To avoid this issue, disable Link Power Management on STM32MP15 HS OTG. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105094855.30763-4-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: dwc2: enable FS/LS PHY clock select on STM32MP15 FS OTGAmelie Delaunay
When the core is in FS host mode, using the FS transceiver, and a Low-Speed device is connected, transceiver clock is 6Mhz. So, to support Low-Speed devices, enable support of FS/LS Low Power mode, so that the PHY supplies a 6 MHz clock during Low-Speed mode. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105094855.30763-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12usb: dwc2: set ahbcfg parameter for STM32MP15 OTG HS and FSAmelie Delaunay
STM32MP15 ahbcfg register default value sets Burst length/type (HBSTLEN) to Single (32-bit accesses on AHB), which is not recommended, according to STM32MP157 Reference manual [1]. This patch sets Burst length/type (HBSTLEN) so that bus transactions target 16x32 bit accesses. This improves OTG controller performance. [1] https://www.st.com/resource/en/reference_manual/dm00327659.pdf, p.3149 Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210105094855.30763-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27usb: dwc2: Avoid leaving the error_debugfs label unusedMartin Blumenstingl
The error_debugfs label is only used when either CONFIG_USB_DWC2_PERIPHERAL or CONFIG_USB_DWC2_DUAL_ROLE is enabled. Add the same #if to the error_debugfs label itself as the code which uses this label already has. This avoids the following compiler warning: warning: label ‘error_debugfs’ defined but not used [-Wunused-label] Fixes: e1c08cf23172ed ("usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: Fix INTR OUT transfers in DDMA mode.Minas Harutyunyan
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor. Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor. In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers. Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCsAmelie Delaunay
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: Always disable regulators on driver teardownMarc Zyngier
If the dwc2 driver fails to probe after having enabled the regulators, it ends up being unregistered with regulators enabled, something the core regulator code is legitimately upset about: dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator dwc2 ff400000.usb: dwc2_core_reset: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE WARNING: CPU: 2 PID: 112 at drivers/regulator/core.c:2074 _regulator_put.part.0+0x16c/0x174 Modules linked in: dwc2(E+) dwc3(E) udc_core(E) rtc_hym8563(E) dwmac_generic(E) ulpi(E) usbcore(E) dwc3_meson_g12a(E) roles(E) meson_gx_mmc(E+) i2c_meson(E) mdio_mux_meson_g12a(E) mdio_mux(E) dwmac_meson8b(E) stmmac_platform(E) stmmac(E) mdio_xpcs(E) phylink(E) of_mdio(E) fixed_phy(E) libphy(E) pwm_regulator(E) fixed(E) CPU: 2 PID: 112 Comm: systemd-udevd Tainted: G E 5.9.0-rc4-00102-g423583bc8cf9 #1840 Hardware name: amlogic w400/w400, BIOS 2020.04 05/22/2020 pstate: 80400009 (Nzcv daif +PAN -UAO BTYPE=--) pc : _regulator_put.part.0+0x16c/0x174 lr : regulator_bulk_free+0x6c/0x9c sp : ffffffc012353820 x29: ffffffc012353820 x28: ffffff805a4b7000 x27: ffffff8059c2eac0 x26: ffffff8059c2e810 x25: ffffff805a4b7d00 x24: ffffffc008cf3028 x23: ffffffc011729ef8 x22: ffffff807e2761d8 x21: ffffffc01171df78 x20: ffffff805a4b7700 x19: ffffff805a4b7700 x18: 0000000000000030 x17: 0000000000000000 x16: 0000000000000000 x15: ffffff807ea8d178 x14: 3935312820435455 x13: 2038323a36313a37 x12: ffffffffffffffff x11: 0000000000000040 x10: 0000000000000007 x9 : ffffffc0106f77d0 x8 : ffffffffffffffe0 x7 : ffffffffffffffff x6 : 0000000000017702 x5 : ffffff805a4b7400 x4 : 0000000000000000 x3 : ffffffc01171df78 x2 : ffffff807ea8cc40 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: _regulator_put.part.0+0x16c/0x174 regulator_bulk_free+0x6c/0x9c devm_regulator_bulk_release+0x28/0x3c release_nodes+0x1c8/0x2c0 devres_release_all+0x44/0x6c really_probe+0x1ec/0x504 driver_probe_device+0x100/0x170 device_driver_attach+0xcc/0xd4 __driver_attach+0xb0/0x17c bus_for_each_dev+0x7c/0xd4 driver_attach+0x30/0x3c bus_add_driver+0x154/0x250 driver_register+0x84/0x140 __platform_driver_register+0x54/0x60 dwc2_platform_driver_init+0x2c/0x1000 [dwc2] do_one_initcall+0x54/0x2d0 do_init_module+0x68/0x29c In order to fix this, tie the regulator disabling to the teardown process by registering a devm action callback. This makes sure that the regulators are disabled at the right time (just before they are released). Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: add support for APM82181 USB OTGChristian Lamparter
adds the specific compatible string for the DWC2 IP found in the APM82181 SoCs. The IP is setup correctly through the auto detection... With the exception of the AHB Burst Size. The default of GAHBCFG_HBSTLEN_INCR4 of the "snps,dwc2" can cause a system hang when the USB and SATA is used concurrently. Because the predecessor (PPC460EX (Canyonlands)) already had the same problem, this SoC can make use of the existing dwc2_set_amcc_params() function. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-24usb: dwc2: Add missing cleanups when usb_add_gadget_udc() failsMartin Blumenstingl
Call dwc2_debugfs_exit() and dwc2_hcd_remove() (if the HCD was enabled earlier) when usb_add_gadget_udc() has failed. This ensures that the debugfs entries created by dwc2_debugfs_init() as well as the HCD are cleaned up in the error path. Fixes: 207324a321a866 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-09-24usb: dwc2: Fix parameter type in function pointer prototypeNathan Chancellor
When booting up on a Raspberry Pi 4 with Control Flow Integrity checking enabled, the following warning/panic happens: [ 1.626435] CFI failure (target: dwc2_set_bcm_params+0x0/0x4): [ 1.632408] WARNING: CPU: 0 PID: 32 at kernel/cfi.c:30 __cfi_check_fail+0x54/0x5c [ 1.640021] Modules linked in: [ 1.643137] CPU: 0 PID: 32 Comm: kworker/0:1 Not tainted 5.8.0-rc6-next-20200724-00051-g89ba619726de #1 [ 1.652693] Hardware name: Raspberry Pi 4 Model B Rev 1.2 (DT) [ 1.658637] Workqueue: events deferred_probe_work_func [ 1.663870] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 1.669542] pc : __cfi_check_fail+0x54/0x5c [ 1.673798] lr : __cfi_check_fail+0x54/0x5c [ 1.678050] sp : ffff8000102bbaa0 [ 1.681419] x29: ffff8000102bbaa0 x28: ffffab09e21c7000 [ 1.686829] x27: 0000000000000402 x26: ffff0000f6e7c228 [ 1.692238] x25: 00000000fb7cdb0d x24: 0000000000000005 [ 1.697647] x23: ffffab09e2515000 x22: ffffab09e069a000 [ 1.703055] x21: 4c550309df1cf4c1 x20: ffffab09e2433c60 [ 1.708462] x19: ffffab09e160dc50 x18: ffff0000f6e8cc78 [ 1.713870] x17: 0000000000000041 x16: ffffab09e0bce6f8 [ 1.719278] x15: ffffab09e1c819b7 x14: 0000000000000003 [ 1.724686] x13: 00000000ffffefff x12: 0000000000000000 [ 1.730094] x11: 0000000000000000 x10: 00000000ffffffff [ 1.735501] x9 : c932f7abfc4bc600 x8 : c932f7abfc4bc600 [ 1.740910] x7 : 077207610770075f x6 : ffff0000f6c38f00 [ 1.746317] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.751723] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.757129] x1 : ffff8000102bb7d8 x0 : 0000000000000032 [ 1.762539] Call trace: [ 1.765030] __cfi_check_fail+0x54/0x5c [ 1.768938] __cfi_check+0x5fa6c/0x66afc [ 1.772932] dwc2_init_params+0xd74/0xd78 [ 1.777012] dwc2_driver_probe+0x484/0x6ec [ 1.781180] platform_drv_probe+0xb4/0x100 [ 1.785350] really_probe+0x228/0x63c [ 1.789076] driver_probe_device+0x80/0xc0 [ 1.793247] __device_attach_driver+0x114/0x160 [ 1.797857] bus_for_each_drv+0xa8/0x128 [ 1.801851] __device_attach.llvm.14901095709067289134+0xc0/0x170 [ 1.808050] bus_probe_device+0x44/0x100 [ 1.812044] deferred_probe_work_func+0x78/0xb8 [ 1.816656] process_one_work+0x204/0x3c4 [ 1.820736] worker_thread+0x2f0/0x4c4 [ 1.824552] kthread+0x174/0x184 [ 1.827837] ret_from_fork+0x10/0x18 CFI validates that all indirect calls go to a function with the same exact function pointer prototype. In this case, dwc2_set_bcm_params is the target, which has a parameter of type 'struct dwc2_hsotg *', but it is being implicitly cast to have a parameter of type 'void *' because that is the set_params function pointer prototype. Make the function pointer protoype match the definitions so that there is no more violation. Fixes: 7de1debcd2de ("usb: dwc2: Remove platform static params") Link: https://github.com/ClangBuiltLinux/linux/issues/1107 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-27Revert "usb: dwc2: override PHY input signals with usb role switch support"Greg Kroah-Hartman
This reverts commit bc0f0d4a5853e32ba97a0318f774570428fc5634. It was not meant to be applied yet. Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-27Revert "usb: dwc2: don't use ID/Vbus detection if usb-role-switch on ↵Greg Kroah-Hartman
STM32MP15 SoCs" This reverts commit 916f8b627288039d9e771a9b2ab1b3c79b303039. This was not meant to be applied as-is at the moment. Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24usb: dwc2: Fix error path in gadget registrationMarek Szyprowski
When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-23usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCsAmelie Delaunay
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-23usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: dwc2: gadget: Avoid pointless read of EP control registerLee Jones
Commit ec1f9d9f01384 ("usb: dwc2: gadget: parity fix in isochronous mode") moved these checks to dwc2_hsotg_change_ep_iso_parity() back in 2015. The assigned value hasn't been read back since. Let's remove the unnecessary H/W read. Fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_hsotg_epint’: drivers/usb/dwc2/gadget.c:2981:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable] 2981 | u32 ctrl; | ^~~~ Cc: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20200715093209.3165641-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-15usb: dwc2: gadget: Make use of GINTMSK2Lee Jones
The value obtained from GINTSTS2 should be masked with the GINTMSK2 value. Looks like this has been broken since dwc2_gadget_wkup_alert_handler() was added back in 2018. Also fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_wkup_alert_handler’: drivers/usb/dwc2/gadget.c:259:6: warning: variable ‘gintmsk2’ set but not used [-Wunused-but-set-variable] 259 | u32 gintmsk2; | ^~~~~~~~ Cc: Ben Dooks <ben@simtec.co.uk> Fixes: 187c5298a1229 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20200715093209.3165641-2-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usb: dwc2: Fix shutdown callback in platformMinas Harutyunyan
To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-03usb: dwc2: gadget: Remove assigned but never used 'maxsize'Lee Jones
The value of 'maxsize' has not been checked since commit 729cac693eecf ("usb: dwc2: Change ISOC DDMA flow") back in 2018, so remove the set but unused variable, which fixes the following W=1 kernel build warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_fill_isoc_desc’: drivers/usb/dwc2/gadget.c:885:6: warning: variable ‘maxsize’ set but not used [-Wunused-but-set-variable] 885 | u32 maxsize = 0; | ^~~~~~~ Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-11-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01USB: Fix up terminologyGreg Kroah-Hartman
USB is a HOST/DEVICE protocol, as per the specification and all documentation. Fix up terms that are not applicable to make things match up with the terms used through the rest of the USB stack. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20200630174123.GA1906678@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29Merge 5.8-rc3 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here, and this resolves a merge issue found in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24USB: ch9: add "USB_" prefix in front of TEST definesGreg Kroah-Hartman
For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi <balbi@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Jason Yan <yanaijie@huawei.com> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jules Irenge <jbi.octave@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: Rob Gill <rrobgill@protonmail.com> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Bin Liu <b-liu@ti.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: dwc2: Postponed gadget registration to the udc class driverMinas Harutyunyan
During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-18usb: dwc2: use well defined macros for power_downJisheng Zhang
Use the well defined macros such as DWC2_POWER_DOWN_PARAM_NONE, DWC2_POWER_DOWN_PARAM_PARTIAL and DWC2_POWER_DOWN_PARAM_HIBERNATION to make code more readable. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20200616162617.38365cc8@xhacker.debian Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-25usb: dwc2: Update Core Reset programming flow.Minas Harutyunyan
Starting from core version 4.20a Core Reset flow is changed. Introduced new bit in GRSTCTL register - GRSTCTL_CSFTRST_DONE. Core Reset new programming flow steps are follow: 1. Set GRSTCTL_CSFTRST bit. 2. Wait for bit GRSTCTL_CSFTRST_DONE is set. 3. Clear GRSTCTL_CSFTRST and GRSTCTL_CSFTRST_DONE bits. Check core version functionality separated from dwc2_get_hwparams() to new dwc2_check_core_version() function because Core Reset flow depend on SNPSID. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-25usb: dwc2: gadget: move gadget resume after the core is in L0 stateFabrice Gasnier
When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN Call the gadget resume routine after the core is in L0 state. Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-05-05USB: dwc2: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to DesignWare USB2 DRD Core Support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-24usb: dwc2: convert to devm_platform_get_and_ioremap_resourceDejin Zheng
Use devm_platform_get_and_ioremap_resource() to simplify code, which contains platform_get_resource() and devm_ioremap_resource(), it also get the resource for use by the following code. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-5-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-16Merge tag 'usb-for-v5.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.7 merge window Lots of changes on dwc3 this time, most of them from Thinh fixing a bunch of really old mishaps on the driver. DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3 learned about Amlogic A1 family. Apart from these, we have a few spelling fixes and other minor non-critical fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits) dt-bindings: usb: add documentation for aspeed usb-vhub ARM: dts: aspeed-g4: add vhub port and endpoint properties ARM: dts: aspeed-g5: add vhub port and endpoint properties ARM: dts: aspeed-g6: add usb functions usb: gadget: aspeed: add ast2600 vhub support usb: gadget: aspeed: read vhub properties from device tree usb: gadget: aspeed: support per-vhub usb descriptors usb: gadget: f_phonet: Replace zero-length array with flexible-array member usb: gadget: composite: Inform controller driver of self-powered usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved" udc: s3c-hsudc: Silence warning about supplies during deferred probe usb: dwc2: Silence warning about supplies during deferred probe dt-bindings: usb: dwc2: add compatible property for rk3368 usb dt-bindings: usb: dwc2: add compatible property for rk3328 usb usb: gadget: add raw-gadget interface usb: dwc2: Implement set_selfpowered() usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h> usb: dwc3: core: don't do suspend for device mode if already suspended usb: dwc3: Rework resets initialization to be more flexible usb: dwc3: Rework clock initialization to be more flexible ...
2020-03-15usb: dwc2: Silence warning about supplies during deferred probeMarek Szyprowski
Don't confuse user with meaningless warning about the failure in getting supplies in case of deferred probe. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc2: Implement set_selfpowered()John Keeping
dwc2 always reports as self-powered in response to a device status request. Implement the set_selfpowered() operations so that the gadget can report as bus-powered when appropriate. This is modelled on the dwc3 implementation. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FSAmelie Delaunay
This patch introduces a new parameter to activate external ID pin and valid vbus level detection, required on STM32MP15 SoC to support dual role, either in HS or FS. The STM32MP15 SoC uses the GGPIO register to enable the level detection. The level detector requires to be powered. Also adds the params structures for STM32MP15 OTG HS and STM32MP1 OTG FS. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-24Merge 5.6-rc3 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-23USB: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200220132017.GA29262@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flowsMinas Harutyunyan
SET/CLEAR_FEATURE for Remote Wakeup allowance not handled correctly. GET_STATUS handling provided not correct data on DATA Stage. Issue seen when gadget's dr_mode set to "otg" mode and connected to MacOS. Both are fixed and tested using USBCV Ch.9 tests. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Fixes: fa389a6d7726 ("usb: dwc2: gadget: Add remote_wakeup_allowed flag") Tested-by: Jack Mitchell <ml@embed.me.uk> Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-02-11usb: dwc2: Fix in ISOC request length checkingMinas Harutyunyan
Moved ISOC request length checking from dwc2_hsotg_start_req() function to dwc2_hsotg_ep_queue(). Fixes: 4fca54aa58293 ("usb: gadget: s3c-hsotg: add multi count support") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-01-15usb: dwc2: Drop unlock/lock upon queueing a work itemLukas Wunner
The original dwc_otg driver used a DWC_WORKQ_SCHEDULE() wrapper to queue work items. Because that wrapper acquired the driver's global spinlock, an unlock/lock dance was necessary whenever a work item was queued up while the global spinlock was already held. The dwc2 driver dropped DWC_WORKQ_SCHEDULE() in favor of a direct call to queue_work(), but retained the (now gratuitous) unlock/lock dance in dwc2_handle_conn_id_status_change_intr(). Drop it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/77c07f00a6a9d94323c4a060a3c72817b0703b97.1574244795.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc2: fix debugfs FIFO countJohn Keeping
The number of FIFOs may be lower than the number of endpoints. Use the correct total when printing FIFO details in debugfs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc2: Fix IN FIFO allocationJohn Keeping
On chips with fewer FIFOs than endpoints (for example RK3288 which has 9 endpoints, but only 6 which are cabable of input), the DPTXFSIZN registers above the FIFO count may return invalid values. With logging added on startup, I see: dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0 dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0 but: # cat /sys/kernel/debug/ff580000.usb/fifo Non-periodic FIFOs: RXFIFO: Size 275 NPTXFIFO: Size 16, Start 0x00000113 Periodic TXFIFOs: DPTXFIFO 1: Size 256, Start 0x00000123 DPTXFIFO 2: Size 128, Start 0x00000223 DPTXFIFO 3: Size 128, Start 0x000002a3 DPTXFIFO 4: Size 64, Start 0x00000323 DPTXFIFO 5: Size 64, Start 0x00000363 DPTXFIFO 6: Size 32, Start 0x000003a3 DPTXFIFO 7: Size 0, Start 0x000003e3 DPTXFIFO 8: Size 0, Start 0x000003a3 DPTXFIFO 9: Size 256, Start 0x00000123 so it seems that FIFO 9 is mirroring FIFO 1. Fix the allocation by using the FIFO count instead of the endpoint count when selecting a FIFO for an endpoint. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc2: Fix NULL qh in dwc2_queue_transactionAlexandru M Stan
When a usb device disconnects in a certain way, dwc2_queue_transaction still gets called after dwc2_hcd_cleanup_channels. dwc2_hcd_cleanup_channels does "channel->qh = NULL;" but dwc2_queue_transaction still wants to dereference qh. This adds a check for a null qh. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Alexandru M Stan <amstan@chromium.org> [dianders: rebased to mainline] Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15usb: dwc2: Fix Stalling a Non-Isochronous OUT EPMinas Harutyunyan
Stalling a Non-Isochronous OUT Endpoint flow changed according programming guide. In dwc2_hsotg_ep_sethalt() function for OUT EP should not be set STALL bit. Instead should set SGOUTNAK in DCTL register. Set STALL bit should be set only after GOUTNAKEFF interrupt asserted. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-18Merge tag 'usb-for-v5.5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ...