| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
|
|
Pull in the fixes branch to resolve conflict in UFS core.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, the drivers one in ufs simply delays running a work
queue and the generic one in zoned storage switches to a more correct
API that tries the standard buddy allocator first (for small
allocations); this fixes an allocation problem with small allocations
seen under memory pressure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Start the RTC update work later
scsi: sd_zbc: Use kvzalloc() to allocate REPORT ZONES buffer
|
|
Some early UFSHCI 4.0 controllers support the UFSHCI 3.0 register set.
The UFSHCD_QUIRK_BROKEN_LSDBS_CAP quirk must be set for these controllers.
Commit b92e5937e352 ("scsi: ufs: core: Move code out of an if-statement")
changed the behavior for these controllers from working fine into
"ufshcd_add_scsi_host: failed to initialize (legacy doorbell mode not
supported)". Fix this by setting the "broken LSDBS" quirk for the
SM8650 development board.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Fixes: b92e5937e352 ("scsi: ufs: core: Move code out of an if-statement")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241106181011.4132974-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241028102428.23118-2-pstanner@redhat.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previously, ufs vops config_scsi_dev was removed because there were no
users. ufs-mediatek needs it to configure the queue flags for each LU
individually. Therefore, bring it back and customize the queue flag as
required.
[mkp: fixed typo]
Signed-off-by: Ed Tsai <ed.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20241008065950.23431-1-ed.tsai@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in 6.12 fixes branch to resolve a merge conflict in ufs-mcq.c.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Peter Griffin <peter.griffin@linaro.org> says:
Hi folks,
This series provides a few cleanups, bug fixes and feature enhancements for
the ufs-exynos driver, particularly for gs101 SoC.
Regarding cleanup we remove some unused phy attribute data that isn't
required when EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR is not set.
Regarding bug fixes the check for EXYNOS_UFS_OPT_UFSPR_SECURE is moved
inside exynos_ufs_config_smu() which fixes a Serror in the resume path
for gs101.
Regarding feature enhancements:
* Gear 4 is enabled which has higher speeds and better power management.
* WriteBooster capability is enabled for gs101 which increases write
performance.
* Clock gating and hibern8 capabilities are enabled for gs101. This leads
to a significantly cooler phone when running the upstream kernel on
Pixel 6. Approximately 10 degrees cooler after 20 minutes at a shell
prompt.
* AXI bus on gs101 is correctly configured for write line unique transactions
* ACG is set to be controlled by UFS_ACG_DISABLE for gs101
Additionally in v3 I've added 2 minor cleanup patches from Tudor and also
an update to MAINTAINERS to add myself as a reviewer and the linux-samsung-soc
list.
Note: In v1 I mentioned the phy hibern8 series in [1] that is still under
discussion however further testing reveals hibern8 feature still works without
the additional UFS phy register writes done in [1]. So this series can be merged
as is and has no runtime dependencies on [1] to be functional.
[1] https://lore.kernel.org/linux-arm-kernel/20241002201555.3332138-3-peter.griffin@linaro.org/T/
regards,
Peter
Link: https://lore.kernel.org/r/20241031150033.3440894-1-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The RTC update work involves runtime resuming the UFS controller. Hence,
only start the RTC update work after runtime power management in the UFS
driver has been fully initialized. This patch fixes the following kernel
crash:
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Workqueue: events ufshcd_rtc_work
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
pm_runtime_get_if_active+0x24/0x9c (L)
pm_runtime_get_if_active+0x24/0x9c
ufshcd_rtc_work+0x138/0x1b4
process_one_work+0x148/0x288
worker_thread+0x2cc/0x3d4
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/0c0bc528-fdc2-4106-bc99-f23ae377f6f5@linaro.org/
Fixes: 6bf999e0eb41 ("scsi: ufs: core: Add UFS RTC support")
Cc: Bean Huo <beanhuo@micron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241031212632.2799127-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Enable clock gating and hibern8 capabilities for gs101. This leads to a
significantly cooler phone when running the upstream kernel.
The exynos_ufs_post_hibern8() hook is also updated to remove the
UIC_CMD_DME_HIBER_EXIT code path as this causes a hang on gs101.
The code path is removed rather than re-factored as no other SoC in
ufs-exynos driver sets UFSHCD_CAP_HIBERN8_WITH_CLK_GATING
capability. Additionally until the previous commit the hibern8 callbacks
were broken anyway as they expected a bool.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-14-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
v1 of the patch which introduced the ufshcd_vops_hibern8_notify()
callback used a bool instead of an enum. In v2 this was updated to an
enum based on the review feedback in [1].
ufs-exynos hibernate calls have always been broken upstream as it
follows the v1 bool implementation.
Link: https://patchwork.kernel.org/project/linux-scsi/patch/001f01d23994$719997c0$54ccc740$@samsung.com/ [1]
Fixes: 55f4b1f73631 ("scsi: ufs: ufs-exynos: Add UFS host support for Exynos SoCs")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-13-peter.griffin@linaro.org
Cc: stable@vger.kernel.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
HCI_IOP_ACG_DISABLE is an undocumented register in the TRM but the
downstream driver sets this register so we follow suit here.
The register is already 0 presumed to be set by the bootloader as the
comment downstream implies the reset state is 1. So whilst this is a nop
currently, it should protect us in case the bootloader behaviour ever
changes.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-12-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently just AXIDMA_RWDATA_BURST_LEN[3:0] field is set to 8 in
exynos_ufs_post_link() function.
To enable WLU transaction additionally we need to set Write Line Unique
enable [31], Write Line Unique Burst Length [30:27] and
AXIDMA_RWDATA_BURST_LEN[3:0].
To support WLU transaction on gs101, both burst length fields need to be
0x3. As all other SoCs expect the current value we update this in the
gs101_ufs_post_link() specific hook.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-11-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Factor out the common code into a new exynos_ufs_shareability() function
and provide a dedicated gs101_drv_init() hook.
This allows us to enable WriteBooster capability (UFSHCD_CAP_WB_EN) in a
way that doesn't effect other SoCs supported in this driver.
WriteBooster improves write speeds by enabling a pseudo SLC cache. Using
the 'fio seqwrite' test we can achieve speeds of 945MB/s with this
feature enabled (until the cache is exhausted) before dropping back to
~260MB/s (which are the speeds we see without the WriteBooster feature
enabled).
Assuming the UFSHCD_CAP_WB_EN capability is set by the host then
WriteBooster can also be enabled and disabled via sysfs so it is
possible for the system to only enable it when extra write performance
is required.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-10-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the assignment of tx_dif_p_nsec as both users of
exynosauto_ufs_drv_init() function (exynosauto and gs101) set the
EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR flag meaning that tx_dif_p_nsec has
no effect.
Additionally both users also set the samsung,sysreg dt property, meaning
the execution flow will always return on the regmap_update_bits() call
before the assignment.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-9-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that exynos_ufs_specify_phy_time_attr() checks the appropriate
EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR flag. Remove the unused fields in
gs101_uic_attr.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-8-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The values calculated in exynos_ufs_specify_phy_time_attr() are only
used in exynos_ufs_config_phy_time_attr() which is only called if the
EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR flag is not set.
Add a check for this flag to exynos_ufs_specify_phy_time_attr() and
return for platforms that don't set it.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-7-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Auto clk control works fine for gs101, so remove
EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL flag.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-6-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the EXYNOS_UFS_OPT_UFSPR_SECURE check inside
exynos_ufs_config_smu().
This way all call sites will benefit from the check. This fixes a bug
currently in the exynos_ufs_resume() path on gs101 as it calls
exynos_ufs_config_smu() and we end up accessing registers that can only
be accessed from secure world which results in a serror.
Fixes: d11e0a318df8 ("scsi: ufs: exynos: Add support for Tensor gs101 SoC")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-5-peter.griffin@linaro.org
Cc: stable@vger.kernel.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS Gear 4 offers faster speeds, and better power usage so lets enable
it.
Currently ufshcd_init_host_params() sets UFS_HS_G3 as a default, so even
if the device supports G4 we end up negotiating down to G3.
For SoCs like gs101 which have a UFS major controller version of 3 or
above advertise Gear 4. This then allows a Gear 4 link on Pixel 6.
For earlier controller versions keep the current default behaviour of
reporting G3.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-4-peter.griffin@linaro.org
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The pointer to device can be obtained from ufs->hba->dev, remove
superfluous function parameter.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-3-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove empty method. When the method is not set, the call is not made,
saving a few cycles.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241031150033.3440894-2-peter.griffin@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
|
|
The previous patch in this series introduced identical code in both
branches of an if-statement. Move that code outside the if-statement.
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-12-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Whether or not MCQ is used, call scsi_add_host() from
ufshcd_add_scsi_host(). For MCQ this patch swaps the order of the
scsi_add_host() and UFS device initialization. This patch prepares for
combining the two scsi_add_host() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous changes guarantee that hba->scsi_host_added is true before
ufshcd_device_init() is called. Hence, remove the code from
ufshcd_device_init() that depends on hba->scsi_host_added being false.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-10-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Expand the ufshcd_device_init(hba, true) call and remove all code that
depends on init_dev_params == false. This change prepares for combining
the two scsi_add_host() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_async_scan() is called (asynchronously) only by ufshcd_init().
Move the ufshcd_device_init(hba, true) call from ufshcd_async_scan()
into ufshcd_init(). This patch prepares for moving both scsi_add_host()
calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from
ufshcd_init() without holding hba->host_sem is safe. This is safe
because hba->host_sem serializes core code and sysfs callbacks. The
ufshcd_device_init() call is moved before the scsi_add_host() call and
hence happens before any SCSI sysfs attributes are created.
Since ufshcd_device_init() may call scsi_add_host(), only call
scsi_add_host() from ufshcd_add_scsi_host() if the SCSI host has not yet
been added by ufshcd_device_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the ufshcd_device_init() and ufshcd_process_hba_result() calls to
the ufshcd_probe_hba() callers. This change refactors the code without
modifying the behavior of the UFSHCI driver. This change prepares for
moving one ufshcd_device_init() call into ufshcd_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The comment /* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */ is
only correct if ufshcd_device_init() is only called by
ufshcd_probe_hba(). Convert the comment into an explicit check. This
patch prepares for moving the ufshcd_device_init() calls.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for moving a ufshcd_device_init() call from inside
ufshcd_probe_hba() into the ufshcd_probe_hba() callers by introducing
the function ufshcd_process_probe_result(). No functionality has been
changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Call ufshcd_add_scsi_host() after host controller initialization has
completed. This is safe because no code between the old and new
ufshcd_add_scsi_host() call site depends on the scsi_add_host() call.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prepare for inlining one ufshcd_device_init() call by introducing the
new function ufshcd_post_device_init(). No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the code for adding a SCSI host and also the code for managing TMF
tags from ufshcd_init() into a new function called
ufshcd_add_scsi_host(). This patch prepares for combining the two
scsi_add_host() calls into a single call. No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the request list cLear register: UTRLCLR.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-4-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management request List cLear register: UTMRLCLR.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-3-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management doorbell register: UTMRLDBR.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241024075033.562562-2-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
From the UFSHCI specification: "CleanUp Command Return Code (RTC): host
controller sets this return code to provide more details of the cleanup
process. It is valid only when CUS is 1." Hence, do not read RTC if the
CUS bitfield is zero.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and
blk_mq_wait_quiesce_done(). Since this patch removes the last callers of
ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove
these functions.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests()
calls were introduced in ufshcd_exception_event_handler() to prevent
that querying the exception event information would time out. Commit
10fe5888a40e ("scsi: ufs: increase the scsi query response timeout")
increased the timeout for querying exception information from 30 ms to
1.5 s and thereby eliminated the risk that a timeout would happen.
Hence, the calls to block and unblock SCSI requests are superfluous.
Remove these calls.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Tested-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The MCQ code is also valid for legacy mode. Hence, remove the legacy
mode code and retain the MCQ code. Since it is not an error if a command
completes while ufshcd_try_to_abort_task() is in progress, use
dev_info() instead of dev_err() to report this.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The only statement that follows the 'out:' label in
ufshcd_try_to_abort_task() is a return-statement. Simplify this function
by changing 'goto out' statements into return statements.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the ufshcd_mcq_enable_esi() definition such that it occurs
immediately before the ufshcd_mcq_config_esi() definition.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count
is 0, we will enter the runtime suspend callback. However, the runtime
suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock.
Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the
deadlock.
Fixes: 6bf999e0eb41 ("scsi: ufs: core: Add UFS RTC support")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241024015453.21684-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current so called "inner loop" in ufshcd_hba_execute_hce() is open
coding ufshcd_wait_for_register(). Replace it by
ufshcd_wait_for_register(). This is a code simplification - no
functional change.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241016102141.441382-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Performance problems may occur if there is a problem with the asymmetric
connected lane such as h/w failure. Currently, only check connected
lane for rx/tx is checked if it is not 0. But it should also be checked
if it is asymmetrically connected.
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/e82b4b65b5f6501a687c624dd06e5c362e160f32.1728544727.git.hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
|
|
There is a history of deadlock if reboot is performed at the beginning
of booting. SDEV_QUIESCE was set for all LU's scsi_devices by UFS
shutdown, and at that time the audio driver was waiting on
blk_mq_submit_bio() holding a mutex_lock while reading the fw binary.
After that, a deadlock issue occurred while audio driver shutdown was
waiting for mutex_unlock of blk_mq_submit_bio(). To solve this, set
SDEV_OFFLINE for all LUs except WLUN, so that any I/O that comes down
after a UFS shutdown will return an error.
[ 31.907781]I[0: swapper/0: 0] 1 130705007 1651079834 11289729804 0 D( 2) 3 ffffff882e208000 * init [device_shutdown]
[ 31.907793]I[0: swapper/0: 0] Mutex: 0xffffff8849a2b8b0: owner[0xffffff882e28cb00 kworker/6:0 :49]
[ 31.907806]I[0: swapper/0: 0] Call trace:
[ 31.907810]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.907819]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.907826]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.907834]I[0: swapper/0: 0] schedule_preempt_disabled+0x24/0x40
[ 31.907842]I[0: swapper/0: 0] __mutex_lock+0x408/0xdac
[ 31.907849]I[0: swapper/0: 0] __mutex_lock_slowpath+0x14/0x24
[ 31.907858]I[0: swapper/0: 0] mutex_lock+0x40/0xec
[ 31.907866]I[0: swapper/0: 0] device_shutdown+0x108/0x280
[ 31.907875]I[0: swapper/0: 0] kernel_restart+0x4c/0x11c
[ 31.907883]I[0: swapper/0: 0] __arm64_sys_reboot+0x15c/0x280
[ 31.907890]I[0: swapper/0: 0] invoke_syscall+0x70/0x158
[ 31.907899]I[0: swapper/0: 0] el0_svc_common+0xb4/0xf4
[ 31.907909]I[0: swapper/0: 0] do_el0_svc+0x2c/0xb0
[ 31.907918]I[0: swapper/0: 0] el0_svc+0x34/0xe0
[ 31.907928]I[0: swapper/0: 0] el0t_64_sync_handler+0x68/0xb4
[ 31.907937]I[0: swapper/0: 0] el0t_64_sync+0x1a0/0x1a4
[ 31.908774]I[0: swapper/0: 0] 49 0 11960702 11236868007 0 D( 2) 6 ffffff882e28cb00 * kworker/6:0 [__bio_queue_enter]
[ 31.908783]I[0: swapper/0: 0] Call trace:
[ 31.908788]I[0: swapper/0: 0] __switch_to+0x174/0x338
[ 31.908796]I[0: swapper/0: 0] __schedule+0x5ec/0x9cc
[ 31.908803]I[0: swapper/0: 0] schedule+0x7c/0xe8
[ 31.908811]I[0: swapper/0: 0] __bio_queue_enter+0xb8/0x178
[ 31.908818]I[0: swapper/0: 0] blk_mq_submit_bio+0x194/0x67c
[ 31.908827]I[0: swapper/0: 0] __submit_bio+0xb8/0x19c
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Cc: stable@vger.kernel.org
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Link: https://lore.kernel.org/r/20240829093913.6282-2-sh8267.baek@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After the SQ cleanup fix, the CQ will receive a response with the
corresponding tag marked as OCS: ABORTED. To align with the behavior of
Legacy SDB mode, the handling of OCS: ABORTED has been changed to match
that of OCS_INVALID_COMMAND_STATUS (SDB), with both returning a SCSI
result of DID_REQUEUE.
Furthermore, the workaround implemented before the SQ cleanup fix can be
removed.
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241001091917.6917-3-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
