| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
|
|
Move syscon_regmap_lookup_by_compatible() above the
devm_clk_get() to avoid missing clk_disable_unprepare().
Fixes: 2f9b25fa6682 ("soc: aspeed: Re-enable FWH2AHB on AST2600")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210824085522.1849410-1-yangyingliang@huawei.com
Link: https://lore.kernel.org/r/20210825001214.3056193-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/drivers
Yaml conversion of io-domain bindings and addition of
rk3568 io domains.
* tag 'v5.15-rockchip-driver1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
dt-bindings: soc: rockchip: add rockchip-io-domain.yaml object to grf.yaml
dt-bindings: power: convert rockchip-io-domain.txt to YAML
soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally
Link: https://lore.kernel.org/r/9718620.EvYhyI6sBW@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the following coccicheck warnings:
./drivers/soc/rockchip/io-domain.c:118:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1629361749-97977-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Recent builds of the vendor u-boot tree disable features of the
BMC that may allow unwanted access if not correctly configured. This
includes the firmware hub to ahb bridge (FWH2AHB), which is used by this
driver.
The bit to "un-disable" it is in the SCU. Set it only when the ioctl is
called and we are running on the ast2600, as to not open up the
'backdoor' unless there's userspace trying to use it.
Fixes: deb50313ba83 ("soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600")
Link: https://lore.kernel.org/r/20210629073520.318514-2-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add AST26XX series AST2625-A3 SOC ID, taken from the vendor u-boot SDK:
arch/arm/mach-aspeed/ast2600/scu_info.c
+ SOC_ID("AST2625-A3", 0x0503040305030403),
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20210818010534.2508122-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.15
This fixes the "shared memory state machine" (SMSM) interrupt logic to
avoid missing transitions happening while the interrupts are masked.
SM6115 support is added to smd-rpm and rpmpd.
The Qualcomm SCM firmware driver is once again made possible to compile
and load as a kernel module.
An out-of-bounds error related to the cooling devices of the AOSS driver
is corrected. The binding is converted to YAML and a generic compatible
is introduced to reduce the driver churn.
The GENI wrapper gains a helper function used in I2C and SPI for
switching the serial engine hardware to use the wrapper's DMA-engine.
Lastly it contains a number of cleanups and smaller fixes for rpmhpd,
socinfo, CPR, mdt_loader and the GENI DT binding.
* tag 'qcom-drivers-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: smsm: Fix missed interrupts if state changes while masked
soc: qcom: smsm: Implement support for get_irqchip_state
soc: qcom: mdt_loader: be more informative on errors
dt-bindings: qcom: geni-se: document iommus
soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: geni: Add support for gpi dma
soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
PM: AVS: qcom-cpr: Use nvmem_cell_read_variable_le_u32()
drivers: soc: qcom: rpmpd: Add SM6115 RPM Power Domains
dt-bindings: power: rpmpd: Add SM6115 to rpmpd binding
dt-bindings: soc: qcom: smd-rpm: Add SM6115 compatible
soc: qcom: aoss: Fix the out of bound usage of cooling_devs
firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module
soc: qcom: socinfo: Don't print anything if nothing found
soc: qcom: rpmhpd: Use corner in power_off
soc: qcom: aoss: Add generic compatible
dt-bindings: soc: qcom: aoss: Convert to YAML
dt-bindings: soc: qcom: aoss: Add SC8180X and generic compatible
firmware: qcom_scm: remove a duplicative condition
firmware: qcom_scm: Mark string array const
Link: https://lore.kernel.org/r/20210816214840.581244-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.15 (take two)
- Prefer memcpy() over strcpy().
* tag 'renesas-drivers-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Prefer memcpy() over strcpy()
Link: https://lore.kernel.org/r/cover.1628849625.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.15-rc1
Implements runtime PM support for the FUSE block and prepares the driver
to work better in conjunction with the CPUIDLE driver.
* tag 'tegra-for-5.15-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
Link: https://lore.kernel.org/r/20210813162157.2820913-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one
side of the comparison, and uses resource address (rather than just the
resource size) on the other side of the comparison.
This can allow malicious userspace to easily bypass the boundary check and
map pages that are located outside memory-region reserved by the driver.
Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver")
Cc: stable@vger.kernel.org
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fixes for v5.14
QE interrupt controller driver
- Convert it to platform_device driver to make it work with fw_devlink
- Fix static analysis issue
* tag 'soc-fsl-fix-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qe: fix static checker warning
soc: fsl: qe: convert QE interrupt controller to platform_device
Link: https://lore.kernel.org/r/20210813222305.13663-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The io-domain registers on RK3568 SoCs have three separated bits to
enable/disable the 1.8v/2.5v/3.3v power.
This patch make the write to be a operation, allow rk3568 uses a private
register set function.
Since the 2.5v mode hasn't been fully validated yet, the driver only sets
1.8v [enable] + 3.3v [disable] for 1.8v mode
1.8v [disable] + 3.3v [enable] for 3.3v mode
There is not register order requirement which has been cleared by our IC
team.
For future reference the full usage matrix including the 2.5V setting is:
case V33 V25 V18 result
0 0 0 0 IO safe, but cannot work
1 0 0 1 IO require 1.8V, should < 1.98V, otherwise IO may damage
2 0 1 0 IO require 2.5V, should < 2.75V, otherwise IO may damage
3 0 1 1 Invalid state, should avoid
4 1 0 0 IO require 3.3V, should < 3.63V, otherwise IO may damage
5 1 0 1 IO require 1.8V, should < 1.98V, otherwise IO may damage
6 1 1 0 IO require 2.5V, should < 2.75V, otherwise IO may damage
7 1 1 1 Invalid state, should avoid
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
[added mode clarification from Jay]
Link: https://lore.kernel.org/r/20210805120107.27007-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The patch be7ecbd240b2: "soc: fsl: qe: convert QE interrupt
controller to platform_device" from Aug 3, 2021, leads to the
following static checker warning:
drivers/soc/fsl/qe/qe_ic.c:438 qe_ic_init()
warn: unsigned 'qe_ic->virq_low' is never less than zero.
In old variant irq_of_parse_and_map() returns zero if failed so
unsigned int for virq_high/virq_low was ok.
In new variant platform_get_irq() returns negative error codes
if failed so we need to use int for virq_high/virq_low.
Also simplify high_handler checking and remove the curly braces
to make checkpatch happy.
Fixes: be7ecbd240b2 ("soc: fsl: qe: convert QE interrupt controller to platform_device")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
soc: Keystone SOC drivers for v5.15
The pull request contains:
- ICSSG subsystem support for Keystone3 AM64x SOCs
- Removes smartrefelx PM dependency for deeper low power states
* tag 'drivers_soc_for_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
Link: https://lore.kernel.org/r/0A637A41-2353-4900-962C-DBE50BBDE75A@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pm-domains:
- correct mask define if used for update on TOPAXI bus
- mt8173: enable regulator befor turning on MFG_ASYNC
mmsys:
- add a mask property to the routing information
- add support for MT8365
- add UFOE routing for MT8173
* tag 'v5.14-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
soc: mmsys: mediatek: add mask to mmsys routes
soc: mediatek: pm-domains: Add domain_supply cap for mfg_async PD
soc: mediatek: pm-domains: Use correct mask for bus_prot_clr
Link: https://lore.kernel.org/r/49fc7bef-20db-b98c-9437-dd9e4d00e870@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. So, use memcpy() as a safe replacement.
This is a previous step in the path to remove the strcpy() function
entirely from the kernel.
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210808125012.4715-3-len.baker@gmx.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The FUSE clock should be enabled during suspend on Tegra124. Currently
clk driver enables it on all SoCs, but FUSE may require a higher core
voltage on Tegra30 while enabled. Move the quirk into the FUSE driver
and make it specific to Tegra124.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra FUSE belongs to the core power domain and we're going to enable
GENPD support for the core domain. Now FUSE device must be resumed using
runtime PM API in order to initialize the FUSE power state. Add runtime PM
support to the FUSE driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The fuse->clk must be cleared if FUSE driver fails to probe, otherwise
tegra_fuse_readl() will crash. It's unlikely to happen in practice,
nevertheless let's correct it for completeness.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Both PMC and cpuidle drivers are probed at the same init level and
cpuidle depends on the PMC suspend mode. Add new default suspend mode
that indicates whether PMC driver has been probed and reset the mode in
a case of deferred probe of the PMC driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Remove including <linux/version.h> that don't need it.
V1->V2: Split the patch in two
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
For the smartreflex device, we need to disable smartreflex on SoC idle,
and have been using pm_runtime_irq_safe() to do that. But we want to
remove the irq_safe usage as PM runtime takes a permanent usage count
on the parent device with it.
In order to remove the need for pm_runtime_irq_safe(), let's gate
the clock directly in the driver. This removes the need to call PM runtime
during idle, and allows us to switch to using CPU_PM in the following
patch.
Note that the smartreflex interconnect target module is configured for smart
idle, but the clock does not have autoidle capability, and needs to be gated
manually. If the clock supported autoidle, we would not need to even gate
the clock.
With this change, we can now remove the related quirk flags for ti-sysc
also.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
The K3 AM64x family of SoCs have a similar version of the PRU-ICSS (ICSSG)
processor subsystem present on K3 J721E and K3 AM65x SR2.0 SoCs. These SoCs
contain typically two ICSSG instances named ICSSG0 and ICSSG1. The two
ICSSGs are identical to each other for the most part with minor SoC
integration differences and capabilities. SGMII mode is not supported at
all on these SoCs (unlike specific instances on AM65x, J721E). The ICSSG1
also has limited pins connected on some sub-modules compared to ICSSG0.
There is no change in the Interrupt Controller w.r.t either of AM65x or
J721E SoCs. All other integration aspects are also very similar to the
existing SoCs.
The existing pruss platform driver has been updated to support these
similar ICSSG instances through a new AM64x specific compatible.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
Now fw_devlink expects driver to create and probe a struct device
for interrupt controller.
So lets convert this driver to simple platform_device with probe().
Also use platform_get_ and devm_ family function to get/allocate
resources and drop unused .compatible = "qeic".
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
The UFOE (data compression engine) component needs to be enabled to have
the imgtec gpu driver working. If we don't enable it we see a black screen.
Looks like when we switched to use and array for setting the routing
registers in commit 440147639ac7 ("soc: mediatek: mmsys: Use an array for
setting the routing registers") we missed to add this component in the new
routing table, it was present before that commit, so fix it by adding
this component in the mt8173 routing table.
Fixes: 440147639ac7 ("soc: mediatek: mmsys: Use an array for setting the routing registers")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625062448.3462177-1-enric.balletbo@collabora.com
[mb: taking into account mask value]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add DSI mmsys connections for the MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210519161847.3747352-3-fparent@baylibre.com
[mb: take the mask field into account]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The SMSM driver detects interrupt edges by tracking the last state
it has seen (and has triggered the interrupt handler for). This works
fine, but only if the interrupt does not change state while masked.
For example, if an interrupt is unmasked while the state is HIGH,
the stored last_value for that interrupt might still be LOW. Then,
when the remote processor triggers smsm_intr() we assume that nothing
has changed, even though the state might have changed from HIGH to LOW.
Attempt to fix this by checking the current remote state before
unmasking an IRQ. Use atomic operations to avoid the interrupt handler
from interfering with the unmask function.
This fixes modem crashes in some edge cases with the BAM-DMUX driver.
Specifically, the BAM-DMUX interrupt handler is not called for the
HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded
(and therefore unmasks the interrupt) after the modem was already started:
qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188:
Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK
Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
At the moment there is no way for drivers to get the current state
of the interrupt signal reported by a remote processor. The irqchip
API has generic functionality for this, using irq_get_irqchip_state().
Implement support for getting the IRQCHIP_STATE_LINE_LEVEL by reading
the remote state and checking the bit for the specified IRQ.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712135703.324748-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In __qcom_mdt_load() there are cases where an error occurs that
cause a message to be printed. In some of those cases the errno
value can be helpful to understand exactly what caused the problem.
Print the errno (as well as the firmware file name) where it is
helpful, and in a few cases reword the error message. Consistently
use the private fw_name for the file name.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210315144455.1770492-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a compatible for SM6115
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210731164827.2756798-3-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
GPI DMA is one of the DMA modes supported on geni, this adds support to
enable that mode
Also do better documentation of the enum geni_se_xfer_mode.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-3-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
GENI_IF_DISABLE_RO is used by geni spi driver as well to check the
status if GENI, so move this to common header qcom-geni-se.h
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210625052213.32260-2-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
SOUT has many bits and need to be cleared before set new value.
Write only could do the clear, but for MOUT, it clears bits that
should not be cleared. So use a mask to reset only the needed bits.
this fixes HDMI issues on MT7623/BPI-R2 since 5.13
Fixes: 440147639ac7 ("soc: mediatek: mmsys: Use an array for setting the routing registers")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210729070549.5514-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Let's delete the private function cpr_read_efuse() since it does the
basically the same thing as the new API call
nvmem_cell_read_variable_le_u32().
Differences between the new API call and the old private function:
* less error printing (I assume this is OK).
* will give an error if the value doesn't fit in 32-bits (the old code
would have truncated silently).
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210521134437.v2.1.Id1c70158722750aec0673d60c12e46a9c66bbfed@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Sparse reports a compile time warning when dereferencing an
__iomem pointer:
drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression
drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression
Use __raw_readl() here for consistency with the rest of the file.
This should really get converted to some proper accessor, as the
__raw functions are not meant to be used in drivers, but the driver
has used these since the start, so for the moment, let's only fix
the warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d4c9e9fc9751 ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When compile-testing with 64-bit resource_size_t, gcc reports an invalid
printk format string:
In file included from include/linux/dma-mapping.h:7,
from drivers/soc/ixp4xx/ixp4xx-npe.c:15:
drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe':
drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=]
dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n",
Use the special %pR format string to print the resources.
Fixes: 0b458d7b10f8 ("soc: ixp4xx: npe: Pass addresses as resources")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.14:
- A couple of fixes on MMDC driver to add missing iounmap() and
clk_disable_unprepare(), and a follow-up fix.
- Fix missing-prototypes warning in SRC driver.
- Revert commit 7d981405d0fd ("soc: imx8m: change to use platform
driver"), which breaks i.MX8M system that has CAAM driver enabled.
- One fix on imx53-m53menlo pinctrl configuration.
- Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent
issues where the PHY would be unresponsive every once in a while.
- Add missing flag for in-band signalling between PHY and MAC on
kontron-sl28-var2 board to fix network support.
- Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless
noise issue.
- Fix sysclk node name for LS1028A so that U-Boot is able to update the
"clock-frequency" property.
* tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
Revert "soc: imx8m: change to use platform driver"
ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms
ARM: imx: common: Move prototype outside the SMP block
ARM: imx: add missing clk_disable_unprepare()
ARM: imx: add missing iounmap()
arm64: dts: ls1028a: fix node name for the sysclk
Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Randconfig builds on the ixp4xx ethernet driver showed that the qmgr and
npe drivers are not actually built even when compile testing is enabled:
ERROR: modpost: "qmgr_stat_empty" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_enable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_set_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "__qmgr_request_queue" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_send_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_load_firmware" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "npe_running" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_disable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
ERROR: modpost: "qmgr_stat_below_low_watermark" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined!
Fix it by always entering the drivers/soc/ixp4xx/ directory, and fix the
resulting compile test failures by removing the #include statements
that prevent building on most other platforms.
Fixes: 7a6c9dbb36a4 ("soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST")
Fixes: fcf2d8978cd5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210721211412.3537004-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The regulator coupler drivers now use regulator-driver API function that
isn't available during compile-testing. Make regulator coupler drivers
dependent on CONFIG_REGULATOR in Kconfig.
Fixes: 03978d42ed0d ("soc/tegra: regulators: Bump voltages on system reboot")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for identifying the R-Car H3e-2G (R8A779M1) and R-Car M3e-2G
(R8A779M3) SoCs.
As these are different gradings of the already supported R-Car H3 ES3.0
(R8A77951) and M3-W+ (R8A77961) SoCs, support for them is enabled
through the existing ARCH_R8A77951 and ARCH_R8A77961 configuration
symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/42b4578ab4739cb48ec3aed0a447fc40c34de1e5.1626708063.git.geert+renesas@glider.be
|
|
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SM4250/6115 have 4 rpm power domains, ported from downstream DT.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210627185927.695411-6-iskren.chernev@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In "qmp_cooling_devices_register", the count value is initially
QMP_NUM_COOLING_RESOURCES, which is 2. Based on the initial count value,
the memory for cooling_devs is allocated. Then while calling the
"qmp_cooling_device_add" function, count value is post-incremented for
each child node.
This makes the out of bound access to the cooling_dev array. Fix it by
passing the QMP_NUM_COOLING_RESOURCES definition to devm_kzalloc() and
initializing the count to 0.
While at it, let's also free the memory allocated to cooling_dev if no
cooling device is found in DT and during unroll phase.
Cc: stable@vger.kernel.org # 5.4
Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210629153249.73428-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Let's skip printing anything if there's nothing to see. This makes it so
the file length is 0 instead of 1, for the newline, and helps scripts
figure out if there's anything to see in these files.
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210628030150.2627905-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
rpmhpd_aggregate_corner() takes a corner as parameter, but in
rpmhpd_power_off() the code requests the level of the first corner
instead.
In all (known) current cases the first corner has level 0, so this
change should be a nop, but in case that there's a power domain with a
non-zero lowest level this makes sure that rpmhpd_power_off() actually
requests the lowest level - which is the closest to "power off" we can
get.
While touching the code, also skip the unnecessary zero-initialization
of "ret".
Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210703005416.2668319-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It seems we don't need platform specific implementation for the AOSS
QMP, so let's introduce a generic compatible to avoid having to update
the driver for each platform.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210709174142.1274554-4-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
