summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_isr.c
AgeCommit message (Collapse)Author
2016-07-15qla2xxx: Fix duplicate message id.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Correction to function qla26xx_dport_diagnostics().Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add support to handle Loop Init error Asynchronus event.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Add bsg interface to support D_Port Diagnostics.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: Shutdown board on thermal shutdown aen.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15qla2xxx: setup data needed in ISR before setting up the ISRJohannes Thumshirn
qla2xxx first calls request_irq() and then does the setup of the queue entry data needed in the interrupt handlers in when using MSI-X. This could lead to a NULL pointer dereference when an IRQ fires between the request_irq() call and the assignment of the qentry data structure to the rsp->msix field. A possible case for such a race would be in the kdump case when the HBA's IRQs are still enabled but the driver is undergoing a new initialisation and thus is not aware of already activated IRQs in the HBA. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-05qla2xxx: Fix NULL pointer deref in QLA interruptBruno Prémont
In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL pointer dereference when rsp->msix is NULL: [ 5.622457] NULL pointer dereference at 0000000000000050 [ 5.622457] IP: [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] PGD 0 [ 5.622457] Oops: 0000 [#1] SMP [ 5.622457] Modules linked in: [ 5.622457] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.6.3-x86_64 #1 [ 5.622457] Hardware name: HP ProLiant DL360 G5, BIOS P58 05/02/2011 [ 5.622457] task: ffff8801a88f3740 ti: ffff8801a8954000 task.ti: ffff8801a8954000 [ 5.622457] RIP: 0010:[<ffffffff8155e614>] [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP: 0000:ffff8801afb03de8 EFLAGS: 00010002 [ 5.622457] RAX: 0000000000000000 RBX: 0000000000000032 RCX: 00000000ffffffff [ 5.622457] RDX: 0000000000000002 RSI: ffff8801a79bf8c8 RDI: ffff8800c8f7e7c0 [ 5.622457] RBP: ffff8801afb03e68 R08: 0000000000000000 R09: 0000000000000000 [ 5.622457] R10: 00000000ffff8c47 R11: 0000000000000002 R12: ffff8801a79bf8c8 [ 5.622457] R13: ffff8800c8f7e7c0 R14: ffff8800c8f60000 R15: 0000000000018013 [ 5.622457] FS: 0000000000000000(0000) GS:ffff8801afb00000(0000) knlGS:0000000000000000 [ 5.622457] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.622457] CR2: 0000000000000050 CR3: 0000000001e07000 CR4: 00000000000006e0 [ 5.622457] Stack: [ 5.622457] ffff8801afb03e30 ffffffff810c0f2d 0000000000000086 0000000000000002 [ 5.622457] ffff8801afb03e28 ffffffff816570e1 ffff8800c8994628 0000000000000002 [ 5.622457] ffff8801afb03e60 ffffffff816772d4 b47c472ad6955e68 0000000000000032 [ 5.622457] Call Trace: [ 5.622457] <IRQ> [ 5.622457] [<ffffffff810c0f2d>] ? __wake_up_common+0x4d/0x80 [ 5.622457] [<ffffffff816570e1>] ? usb_hcd_resume_root_hub+0x51/0x60 [ 5.622457] [<ffffffff816772d4>] ? uhci_hub_status_data+0x64/0x240 [ 5.622457] [<ffffffff81560d00>] qla24xx_intr_handler+0xf0/0x2e0 [ 5.622457] [<ffffffff810d569e>] ? get_next_timer_interrupt+0xce/0x200 [ 5.622457] [<ffffffff810c89b4>] handle_irq_event_percpu+0x64/0x100 [ 5.622457] [<ffffffff810c8a77>] handle_irq_event+0x27/0x50 [ 5.622457] [<ffffffff810cb965>] handle_edge_irq+0x65/0x140 [ 5.622457] [<ffffffff8101a498>] handle_irq+0x18/0x30 [ 5.622457] [<ffffffff8101a276>] do_IRQ+0x46/0xd0 [ 5.622457] [<ffffffff817f8fff>] common_interrupt+0x7f/0x7f [ 5.622457] <EOI> [ 5.622457] [<ffffffff81020d38>] ? mwait_idle+0x68/0x80 [ 5.622457] [<ffffffff8102114a>] arch_cpu_idle+0xa/0x10 [ 5.622457] [<ffffffff810c1b97>] default_idle_call+0x27/0x30 [ 5.622457] [<ffffffff810c1d3b>] cpu_startup_entry+0x19b/0x230 [ 5.622457] [<ffffffff810324c6>] start_secondary+0x136/0x140 [ 5.622457] Code: 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 c5 00 00 00 48 8b 46 50 49 89 f4 65 8b 15 34 bb aa 7e <39> 50 50 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 60 8b 00 [ 5.622457] RIP [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP <ffff8801afb03de8> [ 5.622457] CR2: 0000000000000050 [ 5.622457] ---[ end trace fa2b19c25106d42b ]--- [ 5.622457] Kernel panic - not syncing: Fatal exception in interrupt The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde (qla2xxx: Add irq affinity notification). Only dereference rsp->msix when it has been set so the machine can boot fine. Possibly rsp->msix is unset because: [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k. [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000. [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258. [ 3.890145] scsi host0: qla2xxx [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496). [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Quinn Tran <quinn.tran@qlogic.com> CC: <stable@vger.kernel.org> # 4.5+ Fixes: cdb898c52d1dfad4b4800b83a58b3fe5d352edde Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
2016-02-23qla2xxx: Remove unneeded link offline message.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-06qla2xxx: Fix stale pointer access.Quinn Tran
[ Upstream Commit 84e32a06f4f8756ce9ec3c8dc7e97896575f0771 ] Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of pci_enable_msix()") introduced a regression when target mode is enabled. In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set to a value higher than the number of response queues allocated causing an invalid dereference. Specifically here in qla2x00_init_rings(): *rsp->in_ptr = 0; Add additional check to make sure the pointer is valid. following call stack will be seen ---- 8< ---- RIP: 0010:[<ffffffffa02ccadc>] [<ffffffffa02ccadc>] qla2x00_init_rings+0xdc/0x320 [qla2xxx] RSP: 0018:ffff880429447dd8 EFLAGS: 00010082 .... Call Trace: [<ffffffffa02ceb40>] qla2x00_abort_isp+0x170/0x6b0 [qla2xxx] [<ffffffffa02c6f77>] qla2x00_do_dpc+0x357/0x7f0 [qla2xxx] [<ffffffffa02c6c20>] ? qla2x00_relogin+0x260/0x260 [qla2xxx] [<ffffffff8107d2c9>] kthread+0xc9/0xe0 [<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90 [<ffffffff8172cc6f>] ret_from_fork+0x3f/0x70 [<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90 ---- 8< ---- Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Move atioq to a different lock to reduce lock contentionQuinn Tran
99% of the time the ATIOQ has SCSI command. The other 1% of time is something else. Most of the time this interrupt does not need to hold the hardware_lock. We're moving the ATIO interrupt thread to a different lock to reduce lock contention. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Add selective command queuingQuinn Tran
queue work element to specific process lessen cache miss Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Add irq affinity notificationQuinn Tran
Register to receive notification of when irq setting change occured. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-07qla2xxx: Added interface to send explicit LOGO.Himanshu Madhani
This patch adds interface to send explicit LOGO explicit LOGO using using ELS commands from driver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-08-26qla2xxx: Do not reset ISP for error entry with an out of range handle.Chad Dupuis
Instead of resetting the adapter wait for the login to timeout and retry. Resetting the adapter can cause extended path recovery times. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Do not reset adapter if SRB handle is in range.Chad Dupuis
If an SRB is NULL but the handle is in range just drop the command instead of also resetting the adapter. If the handle is in range then the command was valid at some point and may have been aborted. Resetting the adapter can lead to extended recovery times in this case. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Handle AEN8014 incoming port logout.Joe Carnuccio
When we get logged out, mark the port lost and set dpc flag for relogin. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove __constant_ prefixBart Van Assche
Whether htonl() or __constant_htonl() is used, if the argument is a constant the conversion happens at compile time. Hence leave out the __constant_ prefix for this and other endianness conversion functions. This improves source code readability. [jejb: checkpatch fixes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26qla2xxx: Remove set-but-not-used variablesBart Van Assche
Detected these variables by building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12qla2xxx: prevent board_disable from running during EEHThadeu Lima de Souza Cascardo
Commit f3ddac1918fe963bcbf8d407a3a3c0881b47248b ("[SCSI] qla2xxx: Disable adapter when we encounter a PCI disconnect.") has introduced a code that disables the board, releasing some resources, when reading 0xffffffff. In case this happens when there is an EEH, this read will trigger EEH detection and set PCI channel offline. EEH will be able to recover the card from this state by doing a reset, so it's a better option than simply disabling the card. Since eeh_check_failure will mark the channel as offline before returning the read value, in case there really was an EEH, we can simply check for pci_channel_offline, preventing the board_disable code from running if it's true. Without this patch, EEH code will try to access those same resources that board_disable will try to free. This race can cause EEH recovery to fail. [ 504.370577] EEH: Notify device driver to resume [ 504.370580] qla2xxx [0001:07:00.0]-9002:2: The device failed to resume I/O from slot/link_reset. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13qla2xxx: Fix indentationBart Van Assche
Detected by smatch. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Restore physical port WWPN only, when port down detected for ↵Sawan Chandak
FA-WWPN port. For FA-WWPN is enabled port, if NPIV created on that port and, if port link is brought down, then WWPN was restored from flash for both physical and NPIV port. This will result in NPIV port and physical port sharing same WWPN. Any application refreshing ports information will not be able to scan NPIV port because of this behavior. So while restoring WWPN, only restore physical port WWPN. Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.Sawan Chandak
On some vendor switches, when switch port is toggled (down /up), then in some condition driver tries to configure virtual port, before FW is actually in ready state to process any commands on wire. At this time, configuring virtual port can fail. Add fix in driver to make driver wait, for FW to be ready state before Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-09-25qla2xxx: Mark port lost when we receive an RSCN for it.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Restore WWPN in case of Loop Dead.Himanshu Madhani
For FA-WWPN capable device, ISP2031 and ISP27XX, when loop dead is detected by a driver, restore WWPN from NVRAM. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Honor FCP_RSP retry delay timer field.Chad Dupuis
Parse the retry delay timer field from the FCP response data and if: - It is not zero - The SCSI status is busy or queue full return SCSI_MLQUEUE_TARGET_BUSY for the number of milliseconds specified in the retry delay timer field. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: Add diagnostic port functionality.Joe Carnuccio
Add support for the D-port (diagnostic port) fabric switch feature. (Fabric Switch initiates loopback style port testing) Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-25qla2xxx: ISPFX00 avoid writing semaphore register in request_irqs().Joe Carnuccio
Semaphore register does not exist for ISPFx00. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Prevent probe and board_disable raceJoe Lawrence
The PCI register read checking introduced in commit fe1b806f4f71 ("qla2xxx: Disable adapter when we encounter a PCI disconnect") is active during driver probe. Hold off scheduling any board removal until the driver probe has completed. This ensures that the the board_disable work structure is initialized and more importantly, avoids racing qla2x00_probe_one. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Prevent removal and board_disable raceJoe Lawrence
Introduce mutual exclusion between the qla2xxx_remove_one PCI driver callback and qla2x00_disable_board_on_pci_error, which is scheduled as board_disable work by qla2x00_check_reg{32,16}_for_disconnect: * Leave the driver-specific data attached to the underlying PCI device intact in qla2x00_disable_board_on_pci_error, so that qla2x00_remove_one has enough breadcrumbs to determine that any board_disable work has been completed. * In qla2xxx_remove_one, set a bit to prevent any subsequent board_disable work from scheduling, then cancel and wait until pending work has completed. * Reuse the PCI device enable count check in qla2x00_remove_one to determine if board_disable has occured. The original purpose of this check was unnecessary since the driver remove function wasn't called when the probe fails. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Schedule board_disable only onceJoe Lawrence
There are various callers of qla2x00_check_reg{32,16}_for_disconnect that may schedule board removal on PCI-disconnect. Test-and-set a dedicated flag before scheduling board_disable so it is invoked only once. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Collect PCI register checks and board_disable schedulingJoe Lawrence
Add an uint16_t variant of qla2x00_check_reg_for_disconnect and use these routines to check and schedule a PCI-disconnected board from a centralized place. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Remove restriction on starting remote device discovery on port update.Chad Dupuis
Limiting which port update events will allow the driver to kick off a name server scan has been problematic in some corner cases so remove the restriction and restore the previous semantic. Also move the link up/down informational messages to the LOOP_UP and LOOP_DOWN events. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16qla2xxx: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Log message code 0x00c6 preserved, although it is reported after successful call to pci_enable_msix_range(), not before possibly unsuccessful call to pci_enable_msix(). Consumers of the error code should not notice the difference. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Cc: qla2xxx-upstream@qlogic.com Cc: linux-scsi@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: T10-Dif: add T10-PI supportQuinn Tran
Add support for T10-Dif for Target Mode to qla driver. The driver will look for firmware attribute that support this feature. When the feature is present, the capabilities will be report to TCM layer. Add CTIO CRC2 iocb to build T10-Dif commands. Add support routines to process good & error cases. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Change copyright year to 2014 in all the source files.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Do not schedule reset when one is already active when receiving an ↵Chad Dupuis
invalid status handle. If an adapter reset is already in progress, do not schedule another one when we receive an invalid status handle. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.Armen Baloyan
Send aborts to the firmware via the request/response queue mechanism. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Fix Task Management command asynchronous handlingArmen Baloyan
- Fix interpreting the wrong IOCB type for task management functions in the response path. - Merge the task management function handling for various adapters. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla2xxx: Add support for ISP2071.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-10[SCSI] qla2xxx: Fix multiqueue MSI-X registration.Chad Dupuis
This fixes requesting of the MSI-X vectors for the base response queue. The iteration in the for loop in qla24xx_enable_msix() was incorrect. We should only iterate of the first two MSI-X vectors and not the total number of MSI-X vectors that have given to the driver for this device from pci_enable_msix() in this function. Cc: <stable@vger.kernel.org> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla2xxx: Only complete dcbx_comp and lb_portup_comp for virtual port ↵Chad Dupuis
index 0. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla2xxx: Use the correct mailbox registers when acknowledging an IDC ↵Chad Dupuis
request on ISP8044. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla2xxx: Disable adapter when we encounter a PCI disconnect.Chad Dupuis
If we become disconnected from the PCI bus/PCIe fabric, there can be long delays in register reads which can cause erroneous decisions to be made and cause a soft lockup if a lock is held too long. As a preventative measure, check for a disconnection (register reads that return -1) and then disable the board if we find ourselves in this condition. For now, check in our interrupt handlers and the per adapter one second timer. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when ↵Chad Dupuis
driver resources are low." This reverts commit 3c290d0b5f8ff7b0fd2c964c5ec2c14191a9e790 Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla2xxx: Disable INTx interrupt for ISP82XXSawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-23[SCSI] qla2xxx: Fix request queue null dereference.Chad Dupuis
If an invalid IOCB is returned on the response queue then the index into the request queue map could be invalid and could return to us a bogus value. This could cause us to try to deference an invalid pointer and cause an exception. If we encounter this condition, simply return as no context can be established for this response. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.Santosh Vernekar
Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver. We now have to handle the aen so that other protocol drivers can use time extension during some loopback operations. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Add missing FCP statistics to sysfs interface.Joe Carnuccio
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla2xxx: Make log message that prints when a completion status ↵Chad Dupuis
requires a port down more readable. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>