summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/mediatek
AgeCommit message (Collapse)Author
2021-09-16pinctrl: mediatek: moore: check if pin_desc is valid before useSam Shih
Certain SoC are missing the middle part gpios in consecutive pins, it's better to check if mtk_pin_desc is a valid pin for the extensibility Signed-off-by: Sam Shih <sam.shih@mediatek.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Link: https://lore.kernel.org/r/20210914085137.31761-5-sam.shih@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-02Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-08-30Merge tag 'irq-core-2021-08-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ...
2021-08-12pinctrl: Bulk conversion to generic_handle_domain_irq()Marc Zyngier
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-07-23pinctrl: mediatek: fix platform_no_drv_owner.cocci warningskernel test robot
drivers/pinctrl/mediatek/pinctrl-mt8365.c:488:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC") CC: Fabien Parent <fparent@baylibre.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210626051550.GA37544@d0c207d51ce8 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-23pinctrl: mediatek: Fix fallback behavior for bias_set_comboHsin-Yi Wang
Some pin doesn't support PUPD register, if it fails and fallbacks with bias_set_combo case, it will call mtk_pinconf_bias_set_pupd_r1_r0() to modify the PUPD pin again. Since the general bias set are either PU/PD or PULLSEL/PULLEN, try bias_set or bias_set_rev1 for the other fallback case. If the pin doesn't support neither PU/PD nor PULLSEL/PULLEN, it will return -ENOTSUPP. Fixes: 81bd1579b43e ("pinctrl: mediatek: Fix fallback call path") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Link: https://lore.kernel.org/r/20210701080955.2660294-1-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-09pinctrl: mediatek: fix mode encodingMatthias Brugger
Pin modes are encoded in the SoC data structure. Use that value to set IES SMT. Cc: Fabien Parent <fparent@baylibre.com> Cc: Sean Wang <sean.wang@kernel.org> Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: linux-mediatek@lists.infradead.org Fixes: 696beef77521 ("pinctrl: mediatek: move bit assignment") Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com> Link: https://lore.kernel.org/r/20210608150656.29007-1-matthias.bgg@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-06-07pinctrl: mtk: Fix mt8365 Kconfig dependencyLinus Walleij
This SoC needs to select PINCTRL_MTK or we can end up in kernel compiles that miss some symbols. Cc: Fabien Parent <fparent@baylibre.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28pinctrl: mediatek: move bit assignmentLinus Walleij
The bit needs offset to be defined which happens some lines below. Looks like a bug. The kernel test robot complains: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:137:12: warning: variable 'offset' is uninitialized when used here [-Wuninitialized] bit = BIT(offset & pctl->devdata->mode_mask); ^~~~~~ Fix it up by reverting to what was done before. Cc: Fabien Parent <fparent@baylibre.com> Cc: Sean Wang <sean.wang@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: linux-mediatek@lists.infradead.org Fixes: 9f940d8ecf92 ("pinctrl: mediatek: don't hardcode mode encoding in common code") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-27pinctrl: mediatek: add support for mt8365 SoCFabien Parent
Add pinctrl driver for MT8365 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210519162409.3755679-3-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-27pinctrl: mediatek: don't hardcode mode encoding in common codeFabien Parent
MT8365 encode the pins mode differently than other MTK pinctrl drivers that use the PINCTRL_MTK common code. Add 3 new fields in mtk_pinctrl_devdata in order to store how pin modes are encoded into the register. At the same time update all the pinctrl driver that depends on CONFIG_PINCTRL_MTK. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20210519162409.3755679-2-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22pinctrl: mediatek: use spin lock in mtk_rmwTzung-Bi Shih
Commit 42a46434e9b1 ("pinctrl: add lock in mtk_rmw function.") uses mutex lock in mtk_rmw. However the function is possible called from atomic context. For example call trace: mutex_lock+0x28/0x64 mtk_rmw+0x38/0x80 [snip] max98357a_daiops_trigger+0x8c/0x9c soc_pcm_trigger+0x5c/0x10c The max98357a_daiops_trigger() could run in either atomic or non-atomic context. As a result, dmesg shows some similar messages: "BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254". Uses spin lock in mtk_rmw instead. Fixes: 42a46434e9b1 ("pinctrl: add lock in mtk_rmw function.") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210419093449.3125704-1-tzungbi@google.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22pinctrl: add drive for I2C related pins on MT8195Zhiyong Tao
This patch provides the advanced drive raw data setting version for I2C used pins on MT8195. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20210413055702.27535-4-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22pinctrl: add pinctrl driver on mt8195Zhiyong Tao
This commit includes pinctrl driver for mt8195. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20210413055702.27535-3-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-25pinctrl: add lock in mtk_rmw function.Zhiyong Tao
When multiple threads operate on the same register resource which include multiple pin, It will make the register resource wrong to control. So we add lock to avoid the case. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Link: https://lore.kernel.org/r/20210321033150.15380-2-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-22Merge tag 'pinctrl-v5.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.12 kernel. This time a calm set with no core changes. New drivers/subdrivers: - Renesas R8A7790A0 pin controller. - Allwinner H616 and H616-R pin controllers. - Qualcomm SM8350 and SC8180x pin controllers. Improvements: - Redo the DT bindings for Ralink RT2880. - A common Qualcomm TLMM DT binding in YAML. - Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX" * tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits) pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt dt-bindings: pinctrl: Group tuples in pin control properties pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'" pinctrl: at91-pio4: add support for slew-rate dt-bindings: pinctrl: at91-pio4: add slew-rate pinctrl: actions: Add depends on || COMPILE_TEST pinctrl: single: set function name when adding function pinctrl: qcom: Add sc8180x TLMM driver dt-bindings: pinctrl: qcom: Add sc8180x binding dt-bindings: pinctrl: qcom: Define common TLMM binding pinctrl: qcom: Add SM8350 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings pinctrl: samsung: use raw_spinlock for s3c64xx dt-bindings: mediatek: mt8192: Fix dt_binding_check warning pinctrl: qcom: spmi-mpp: Add PM8019 compatible pinctrl: pinmux: add function selector to pinmux-functions pinctrl: samsung: use raw_spinlock for locking pinctrl: clarify #pinctrl-cells for pinctrl-single,pins pinctrl: actions: Add the platform dependency to drivers ...
2021-02-15pinctrl: mediatek: Fix trigger type setting follow for unexpected interruptHailong Fan
When flipping the polarity will be generated interrupt under certain circumstances, but GPIO external signal has not changed. Then, mask the interrupt before polarity setting, and clear the unexpected interrupt after trigger type setting completed. Remove mtk_eint_flip_edge: because mtk_eint_unmask already calls it. Signed-off-by: Hailong Fan <hailong.fan@mediatek.com> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Link: https://lore.kernel.org/r/20210125041753.2214-1-hailong.fan@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-06pinctrl: mediatek: Fix fallback call pathHsin-Yi Wang
Some SoCs, eg. mt8183, are using a pinconfig operation bias_set_combo. The fallback path in mtk_pinconf_adv_pull_set() should also try this operation. Fixes: cafe19db7751 ("pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usage") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201228090425.2130569-1-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: moore: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084801.2425-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: paris: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084717.2371-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12pinctrl: mediatek: simplify the return expression of ↵Zheng Yongjun
mtk_pinconf_bias_disable_set_rev1() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135902.1548-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: mtk: Fix low level output voltage issueZhiyong Tao
This patch is used to fix low level output voltage issue. A pin is changed from input pull-up to output high. The Dout value of the pin is default as 0. If we change the direction of the pin before the dout value of the pin, It maybe produce a low level output voltage between "input pull-up" and "output high". Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Link: https://lore.kernel.org/r/20201120093058.7248-2-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10pinctrl: mt7622: drop pwm ch7 as mt7622 only has 6 channelsFrank Wunderlich
mt7622 is reported by mediatek to have only 6 pwm channels so drop pindefines for 7th channel Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201016204019.2606-4-linux@fw-web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-14Merge tag 'pinctrl-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - NONE whatsoever, we don't even touch the core files this time around. New drivers: - New driver for the Toshiba Visconti SoC. - New subdriver for the Qualcomm MSM8226 SoC. - New subdriver for the Actions Semiconductor S500 SoC. - New subdriver for the Mediatek MT8192 SoC. - New subdriver for the Microchip SAMA7G5 SoC. Driver enhancements: - Intel Cherryview and Baytrail cleanups and refactorings. - Enhanced support for the Renesas R8A7790, more pins and groups. - Some optimizations for the MCP23S08 MCP23x17 variant. - Some cleanups around the Actions Semiconductor subdrivers. - A bunch of cleanups around the SH-PFC and Emma Mobile drivers. - The "SH-PFC" (literally SuperH pin function controller, I think) subdirectory is now renamed to the more neutral "renesas", as these are not very much centered around SuperH anymore. - Non-critical fixes for the Aspeed driver. - Non-critical fixes for the Ingenic (MIPS!) driver. - Fix a bunch of missing pins on the AMD pinctrl driver" * tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits) pinctrl: amd: Add missing pins to the pin group list dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI pinctrl: mediatek: Free eint data on failure pinctrl: single: fix debug output when #pinctrl-cells = 2 pinctrl: single: fix pinctrl_spec.args_count bounds check pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent pinctrl: cannonlake: Modify COMMUNITY macros to be consistent pinctrl: tigerlake: Fix register offsets for TGL-H variant pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2 pinctrl: mediatek: use devm_platform_ioremap_resource_byname() pinctrl: nuvoton: npcm7xx: Constify static ops structs pinctrl: mediatek: mt7622: add antsel pins/groups pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register() pinctrl: at91-pio4: add support for sama7g5 SoC dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5 pinctrl: spear: simplify the return expression of tvc_connect() pinctrl: spear: simplify the return expression of spear310_pinctrl_probe pinctrl: sprd: use module_platform_driver to simplify the code pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs. ...
2020-10-07pinctrl: mediatek: Free eint data on failureEnric Balletbo i Serra
The pinctrl driver can work without the EINT resource, but, if it is expected to have this resource but the mtk_build_eint() function fails after allocating their data (because can't get the resource or can't map the irq), the data is not freed and you end with a NULL pointer dereference. Fix this by freeing the data if mtk_build_eint() fails, so pinctrl still works and doesn't hang. This is noticeable after commit f97dbf48ca43 ("irqchip/mtk-sysirq: Convert to a platform driver") on MT8183 because, due this commit, the pinctrl driver fails to map the irq and spots the following bug: [ 1.947597] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 1.956404] Mem abort info: [ 1.959203] ESR = 0x96000004 [ 1.962259] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.967565] SET = 0, FnV = 0 [ 1.970613] EA = 0, S1PTW = 0 [ 1.973747] Data abort info: [ 1.976619] ISV = 0, ISS = 0x00000004 [ 1.980447] CM = 0, WnR = 0 [ 1.983410] [0000000000000004] user address but active_mm is swapper [ 1.989759] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.995322] Modules linked in: [ 1.998371] CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc1+ #44 [ 2.004715] Hardware name: MediaTek krane sku176 board (DT) [ 2.010280] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) [ 2.015850] pc : mtk_eint_set_debounce+0x48/0x1b8 [ 2.020546] lr : mtk_eint_set_debounce+0x34/0x1b8 [ 2.025239] sp : ffff80001008baa0 [ 2.028544] x29: ffff80001008baa0 x28: ffff0000ff7ff790 [ 2.033847] x27: ffff0000f9ec34b0 x26: ffff0000f9ec3480 [ 2.039150] x25: ffff0000fa576410 x24: ffff0000fa502800 [ 2.044453] x23: 0000000000001388 x22: ffff0000fa635f80 [ 2.049755] x21: 0000000000000008 x20: 0000000000000000 [ 2.055058] x19: 0000000000000071 x18: 0000000000000001 [ 2.060360] x17: 0000000000000000 x16: 0000000000000000 [ 2.065662] x15: ffff0000facc8470 x14: ffffffffffffffff [ 2.070965] x13: 0000000000000001 x12: 00000000000000c0 [ 2.076267] x11: 0000000000000040 x10: 0000000000000070 [ 2.081569] x9 : ffffaec0063d24d8 x8 : ffff0000fa800270 [ 2.086872] x7 : 0000000000000000 x6 : 0000000000000011 [ 2.092174] x5 : ffff0000fa800248 x4 : ffff0000fa800270 [ 2.097476] x3 : ffff8000100c5000 x2 : 0000000000000000 [ 2.102778] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.108081] Call trace: [ 2.110520] mtk_eint_set_debounce+0x48/0x1b8 [ 2.114870] mtk_gpio_set_config+0x5c/0x78 [ 2.118958] gpiod_set_config+0x5c/0x78 [ 2.122786] gpiod_set_debounce+0x18/0x28 [ 2.126789] gpio_keys_probe+0x50c/0x910 [ 2.130705] platform_drv_probe+0x54/0xa8 [ 2.134705] really_probe+0xe4/0x3b0 [ 2.138271] driver_probe_device+0x58/0xb8 [ 2.142358] device_driver_attach+0x74/0x80 [ 2.146532] __driver_attach+0x58/0xe0 [ 2.150274] bus_for_each_dev+0x70/0xc0 [ 2.154100] driver_attach+0x24/0x30 [ 2.157666] bus_add_driver+0x14c/0x1f0 [ 2.161493] driver_register+0x64/0x120 [ 2.165319] __platform_driver_register+0x48/0x58 [ 2.170017] gpio_keys_init+0x1c/0x28 [ 2.173672] do_one_initcall+0x54/0x1b4 [ 2.177499] kernel_init_freeable+0x1d0/0x238 [ 2.181848] kernel_init+0x14/0x118 [ 2.185328] ret_from_fork+0x10/0x34 [ 2.188899] Code: a9438ac1 12001266 f94006c3 121e766a (b9400421) [ 2.194991] ---[ end trace 168cf7b3324b6570 ]--- [ 2.199611] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.207260] SMP: stopping secondary CPUs [ 2.211294] Kernel Offset: 0x2ebff4800000 from 0xffff800010000000 [ 2.217377] PHYS_OFFSET: 0xffffb50500000000 [ 2.221551] CPU features: 0x0240002,2188200c [ 2.225811] Memory Limit: none [ 2.228860] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 89132dd8ffd2 ("pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201001142511.3560143-1-enric.balletbo@collabora.com [rebased on changed infrastructure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-01pinctrl: mediatek: check mtk_is_virt_gpio input parameterHanks Chen
check mtk_is_virt_gpio input parameter, virtual gpio need to support eint mode. add error handler for the ko case to fix this boot fail: pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2] lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris] Fixes: edd546465002 ("pinctrl: mediatek: avoid virtual gpio trying to set reg") Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Singed-off-by: Jie Yang <sin_jieyang@mediatek.com> Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-30pinctrl: mediatek: use devm_platform_ioremap_resource_byname()Wang Xiaojun
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20200917064151.2184010-1-wangxiaojun11@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: mediatek: mt7622: add antsel pins/groupsChuanhong Guo
These pins are named ANTSEL[0~29] in datasheet and are used by wmac for various functions. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Link: https://lore.kernel.org/r/20200922164159.120920-1-gch981213@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-27pinctrl: mediatek: Add MT8167 Pinctrl driverFabien Parent
This commit adds the pinctrl driver for the MediaTek's MT8167 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20200907110221.1691168-2-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: mediatek: Add pinctrl driver for mt8192Zhiyong Tao
This commit includes pinctrl driver for mt8192. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20200817001702.1646-4-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: fix build for tristate changesRandy Dunlap
Export mtk_is_virt_gpio() for the case when CONFIG_PINCTRL_MTK=y CONFIG_PINCTRL_MTK_V2=y CONFIG_PINCTRL_MTK_MOORE=y CONFIG_PINCTRL_MTK_PARIS=m to fix this build error: ERROR: modpost: "mtk_is_virt_gpio" [drivers/pinctrl/mediatek/pinctrl-paris.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sean Wang <sean.wang@kernel.org> Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/d15827a3-d0c8-e231-9f61-8507b3d7be3a@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: add mt6779 eint supportHanks Chen
add driver setting to support mt6779 eint Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-6-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: add pinctrl support for MT6779 SoCHanks Chen
This adds MT6779 pinctrl driver based on MediaTek pinctrl-paris core. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-5-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-04pinctrl: mediatek: avoid virtual gpio trying to set regHanks Chen
for virtual gpios, they should not do reg setting and should behave as expected for eint function. Signed-off-by: Mars Cheng <mars.cheng@mediatek.com> Signed-off-by: Hanks Chen <hanks.chen@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/1595503197-15246-4-git-send-email-hanks.chen@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-16pinctrl: mediatek: pinctrl-mtk-common-v2: Mark ↵Lee Jones
'mtk_default_register_base_names' as __maybe_unused Not all sourcefiles which end up including pinctrl-mtk-common-v2.h make use of 'mtk_default_register_base_names' and there is nowhere we can place the definition to void the need for __maybe_unused except its own headerfile, which seems like overkill. So instead we tell the compiler that it's okay for it to be unused by some of the consumers. Fixes the following W=1 kernel build warning(s): In file included from drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:19: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-moore.h:25, from drivers/pinctrl/mediatek/pinctrl-moore.c:12: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-paris.c:15: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h:15, from drivers/pinctrl/mediatek/pinctrl-mt6797.c:13: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h:12, from drivers/pinctrl/mediatek/pinctrl-mt8183.c:9: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/pinctrl/mediatek/pinctrl-paris.h:27, from drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h:12, from drivers/pinctrl/mediatek/pinctrl-mt6765.c:10: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h:83:27: warning: ‘mtk_default_register_base_names’ defined but not used [-Wunused-const-variable=] 83 | static const char const mtk_default_register_base_names[] = { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Sean Wang <sean.wang@kernel.org> Cc: Sean Wang <sean.wang@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Link: https://lore.kernel.org/r/20200713144930.1034632-11-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-07Merge tag 'pinctrl-v5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.8 kernel cycle. It's just really boring this time. Zero core changes. Just linear development, cleanups and misc noncritical fixes. Some new drivers for very new Qualcomm and Intel chips. New drivers: - Intel Jasper Lake support. - NXP Freescale i.MX8DXL support. - Qualcomm SM8250 support. - Renesas R8A7742 SH-PFC support. Driver improvements: - Severe cleanup and modernization of the MCP23s08 driver. - Mediatek driver modularized. - Setting config supported in the Meson driver. - Wakeup support for the Broadcom BCM7211" * tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sprd: Fix the incorrect pull-up definition pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()' pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()' pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe() pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' pinctrl: bcm2835: Add support for wake-up interrupts pinctrl: bcm2835: Match BCM7211 compatible string dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt dt-bindings: pinctrl: stm32: Add missing interrupts property pinctrl: at91-pio4: Add COMPILE_TEST support pinctrl: Fix return value about devm_platform_ioremap_resource() MAINTAINERS: Renesas Pin Controllers are supported dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2 pinctrl: ocelot: Remove instance number from pin functions pinctrl: ocelot: Always register GPIO driver dt-bindings: pinctrl: rockchip: update example pinctrl: amd: Add ACPI dependency ...
2020-05-12pinctrl: mediatek: add pinctrl-mtk-common-v2 module licenseArnd Bergmann
Kbuild warns when this file is built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.o see include/linux/module.h for more information Add the missing license/author/description tags. Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200505140848.554957-1-arnd@arndb.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16pinctrl: mediatek: remove shadow variable declarationLight Hsieh
Remove shadow declaration of variable 'pullup' in mtk_pinconf_get() Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Link: https://lore.kernel.org/r/1586255632-27528-1-git-send-email-light.hsieh@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16pinctrl: mediatek: make MediaTek MT6765 pinctrl ready for buiding loadable ↵Light Hsieh
module This patch make pinctrl-mt6765 ready for building as loadable module. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/42100afe6f97d28447c153bea6b54ea556cf95ca.1586289920.git.sean.wang@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling ↵Light Hsieh
loadable module In the future we want to be able to build the MediaTek pinctrl driver, based on paris, as kernel module. This patch allows pinctrl-paris.c, the external interrupt controller mtk-eint.c, and pinctrl-mtk-common-v2.c to be loadable as module. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/9feeb04805e5a406fe22a92e3f280abda39ddda4.1586289920.git.sean.wang@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-27pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200311090644.20287-1-tiwai@suse.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: mediatek: Fix some off by one bugsDan Carpenter
These comparisons should be >= instead of > to prevent accessing one element beyond the end of the hw->soc->pins[] array. Fixes: 3de7deefce69 ("pinctrl: mediatek: Check gpio pin number and use binary search in mtk_hw_pin_field_lookup()") Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200218055247.74s2xa7veqx2do34@kili.mountain Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-20pinctrl: mediatek: remove set but not used variable 'e'YueHaibing
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c: In function mtk_hw_pin_field_lookup: drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:70:39: warning: variable e set but not used [-Wunused-but-set-variable] Since commit 3de7deefce69 ("pinctrl: mediatek: Check gpio pin number and use binary search in mtk_hw_pin_field_lookup()"), it is not used any more, so remove it, also remove redundant assignment to variable c, it will be assigned a new value later before used. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200218023625.14324-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Add support for pin configuration dump via debugfs.Light Hsieh
Add support for pin configuration dump via catting /sys/kernel/debug/pinctrl/$platform_dependent_path/pinconf-pins. pinctrl framework had already support such dump. This patch implement the operation function pointer to fullfill this dump. Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-6-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usageLight Hsieh
Refine mtk_pinconf_set()/mtk_pinconf_get() for backward compatibility to previous MediaTek's bias-pull usage. In PINCTRL_MTK that use pinctrl-mtk-common.c, bias-pull setting for pins with 2 pull resistors can be specified as value for bias-pull-up and bias-pull-down. For example: bias-pull-up = <MTK_PUPD_SET_R1R0_00>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; bias-pull-up = <MTK_PUPD_SET_R1R0_11>; bias-pull-down = <MTK_PUPD_SET_R1R0_00>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; bias-pull-down = <MTK_PUPD_SET_R1R0_11>; On the other hand, PINCTRL_MTK_PARIS use customized properties "mediatek,pull-up-adv" and "mediatek,pull-down-adv" to specify bias-pull setting for pins with 2 pull resistors. This introduce in-compatibility in device tree and increase porting effort to MediaTek's customer that had already used PINCTRL_MTK version. Besides, if customers are not aware of this change and still write devicetree for PINCTRL_MTK version, they may encounter runtime failure with pinctrl and spent time to debug. This patch adds backward compatible to previous MediaTek's bias-pull usage so that Mediatek's customer need not use a new devicetree property name. The rationale is that: changing driver implementation had better leave interface unchanged. Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-5-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Refine mtk_pinconf_get()Light Hsieh
Correct cases for PIN_CONFIG_SLEW_RATE, PIN_CONFIG_INPUT_SCHMITT_ENABLE, and PIN_CONFIG_OUTPUT_ENABLE - Use variable ret to receive value in mtk_hw_get_value() (instead of variable val) since pinconf_to_config_packed() at end of this function use variable ret to pack config value. Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-4-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Refine mtk_pinconf_get() and mtk_pinconf_set()Light Hsieh
1.Refine mtk_pinconf_get(): Use only one occurrence of return at end of this function. 2.Refine mtk_pinconf_set(): 2.1 Use only one occurrence of return at end of this function. 2.2 Modify case of PIN_CONFIG_INPUT_ENABLE - 2.2.1 Regard all non-zero setting value as enable, instead of always enable. 2.2.2 Remove check of ies_present flag and always invoke mtk_hw_set_value() since mtk_hw_pin_field_lookup() invoked inside mtk_hw_set_value() has the same effect of checking if ies control is supported. [The rationale is that: available of a control is always checked in mtk_hw_pin_field_lookup() and no need to add ies_present flag specially for ies control.] 2.3 Simply code logic for case of PIN_CONFIG_INPUT_SCHMITT. 2.4 Add case for PIN_CONFIG_INPUT_SCHMITT_ENABLE and process it with the same code for case of PIN_CONFIG_INPUT_SCHMITT. Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-3-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Supporting driving setting without mapping current to ↵Light Hsieh
register value MediaTek's smartphone project actual usage does need to know current value (in mA) in procedure of finding the best driving setting. The steps in the procedure is like as follow: 1. set driving setting field in setting register as 0, measure waveform, perform test, and etc. 2. set driving setting field in setting register as 1, measure waveform, perform test, and etc. ... n. set driving setting field in setting register as n-1, measure waveform, perform test, and etc. Check the results of steps 1~n and adopt the setting that get best result. This procedure does need to know the mapping between current to register value. Therefore, setting driving without mapping current is more practical for MediaTek's smartphone usage. Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-2-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: mediatek: Check gpio pin number and use binary search in ↵Light Hsieh
mtk_hw_pin_field_lookup() 1. Check if gpio pin number is in valid range to prevent from get invalid pointer 'desc' in the following code: desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio]; 2. Improve mtk_hw_pin_field_lookup() 2.1 Modify mtk_hw_pin_field_lookup() to use binary search for accelerating search. 2.2 Correct message after the following check fail: if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) { rc = &hw->soc->reg_cal[field]; The original message is: "Not support field %d for pin %d (%s)\n" However, the check is on soc chip level, not on pin level yet. So the message is corrected as: "Not support field %d for this soc\n" Signed-off-by: Light Hsieh <light.hsieh@mediatek.com> Link: https://lore.kernel.org/r/1579675994-7001-1-git-send-email-light.hsieh@mediatek.com Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>