summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-10-05can: flexcan: fix resume functionFabio Estevam
[ Upstream commit 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 ] On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-09-02net: fec: fix NULL pointer dereference in fec_enet_timeout_workHubert Feurstein
[ Upstream commit 0c8185944a125621a1766615585238a3563ccac3 ] This patch initialises the fep->netdev pointer. This pointer was not initialised at all, but is used in fec_enet_timeout_work and in some error paths. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-08-07net: mvneta: set real interrupt per packet for tx_doneDmitri Epshtein
[ Upstream commit 06708f81528725148473c0869d6af5f809c6824b ] Commit aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v3.10+ Fixes aebea2ba0f74 ("net: mvneta: fix Tx interrupt delay") Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
2016-07-12sfc: on MC reset, clear PIO buffer linkage in TXQsEdward Cree
[ Upstream commit c0795bf64cba4d1b796fdc5b74b33772841ed1bb ] Otherwise, if we fail to allocate new PIO buffers, our TXQs will try to use the old ones, which aren't there any more. Fixes: 183233bec810 "sfc: Allocate and link PIO buffers; map them with write-combining" Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12tuntap: correctly wake up process during uninitJason Wang
[ Upstream commit addf8fc4acb1cf79492ac64966f07178793cb3d7 ] We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net: fec: only clear a queue's work bit if the queue was emptiedUwe Kleine-König
[ Upstream commit 1c021bb717a70aaeaa4b25c91f43c2aeddd922de ] In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc92b3 ("net: fec: change data structure to support multiqueue") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net/mlx4_en: fix spurious timestamping callbacksEric Dumazet
[ Upstream commit fc96256c906362e845d848d0f6a6354450059e81 ] When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47010e8 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12atl2: Disable unimplemented scatter/gather featureBen Hutchings
[ Upstream commit f43bfaeddc79effbf3d0fcb53ca477cca66f3db8 ] atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12jme: Fix device PM wakeup API usageGuo-Fu Tseng
[ Upstream commit 81422e672f8181d7ad1ee6c60c723aac649f538f ] According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12jme: Do not enable NIC WoL functions on S0Guo-Fu Tseng
[ Upstream commit 0772a99b818079e628a1da122ac7ee023faed83e ] Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12qmi_wwan: add "D-Link DWM-221 B1" device idBjørn Mork
[ Upstream commit e84810c7b85a2d7897797b3ad3e879168a8e032a ] Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12ppp: take reference on channels netnsGuillaume Nault
[ Upstream commit 1f461dcdd296eecedaffffc6bae2bfa90bd7eb89 ] Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net: bcmgenet: fix dma api length mismatchEric Dumazet
[ Upstream commit eee577232203842b4dcadb7ab477a298479633ed ] When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12qlge: Fix receive packets drop.Manish Chopra
[ Upstream commit 2c9a266afefe137bff06bbe0fc48b4d3b3cb348c ] When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12ppp: ensure file->private_data can't be overriddenGuillaume Nault
[ Upstream commit e8e56ffd9d2973398b60ece1f1bebb8d67b4d032 ] Locking ppp_mutex must be done before dereferencing file->private_data, otherwise it could be modified before ppp_unattached_ioctl() takes the lock. This could lead ppp_unattached_ioctl() to override ->private_data, thus leaking reference to the ppp_file previously pointed to. v2: lock all ppp_ioctl() instead of just checking private_data in ppp_unattached_ioctl(), to avoid ambiguous behaviour. Fixes: f3ff8a4d80e8 ("ppp: push BKL down into the driver") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12ath9k: fix buffer overrun for ar9287Arnd Bergmann
[ Upstream commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12farsync: fix off-by-one bug in fst_add_oneArnd Bergmann
[ Upstream commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 ] gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12mlx4: add missing braces in verify_qp_parametersArnd Bergmann
[ Upstream commit baefd7015cdb304ce6c94f9679d0486c71954766 ] The implementation of QP paravirtualization back in linux-3.7 included some code that looks very dubious, and gcc-6 has grown smart enough to warn about it: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) { ^~ drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not if (slave != mlx4_master_func_num(dev)) >From looking at the context, I'm reasonably sure that the indentation is correct but that it should have contained curly braces from the start, as the update_gid() function in the same patch correctly does. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12qlcnic: Fix mailbox completion handling during spurious interruptRajesh Borundia
[ Upstream commit 819bfe764dceec2f6b4551768453f374b4c60443 ] o While the driver is in the middle of a MB completion processing and it receives a spurious MB interrupt, it is mistaken as a good MB completion interrupt leading to premature completion of the next MB request. Fix the driver to guard against this by checking the current state of MB processing and ignore the spurious interrupt. Also added a stats counter to record this condition. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12qlcnic: Remove unnecessary usage of atomic_tRajesh Borundia
[ Upstream commit 5bf93251cee1fb66141d1d2eaff86e04a9397bdf ] o atomic_t usage is incorrect as we are not implementing any atomicity. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12sh_eth: fix RX buffer size alignmentSergei Shtylyov
[ Upstream commit ab8579169b79c062935dade949287113c7c1ba73 ] Both Renesas R-Car and RZ/A1 manuals state that RX buffer length must be a multiple of 32 bytes, while the driver only uses 16 byte granularity... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12sh_eth: Fix DMA-API usage for RX buffersBen Hutchings
[ Upstream commit 52b9fa3696c44151a2f1d361a00be7c5513db026 ] - Use the return value of dma_map_single(), rather than calling virt_to_page() separately - Check for mapping failue - Call dma_unmap_single() rather than dma_sync_single_for_cpu() Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12sh_eth: Remove redundant alignment adjustmentMitsuhiro Kimura
[ Upstream commit 450fa21942fe2c37f0c9f52d1a33bbc081eee288 ] PTR_ALIGN macro after skb_reserve is redundant, because skb_reserve function adjusts the alignment of skb->data. Signed-off-by: Mitsuhiro Kimura <mitsuhiro.kimura.kc@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12sh_eth: fix NULL pointer dereference in sh_eth_ring_format()Sergei Shtylyov
[ Upstream commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12usbnet: cleanup after bind() in probe()Oliver Neukum
[ Upstream commit 1666984c8625b3db19a9abc298931d35ab7bc64b ] In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12cdc_ncm: toggle altsetting to force reset before setupBjørn Mork
[ Upstream commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12qmi_wwan: add Sierra Wireless EM74xx device IDBjørn Mork
[ Upstream commit bf13c94ccb33c3182efc92ce4989506a0f541243 ] The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net: qca_spi: clear IFF_TX_SKB_SHARINGStefan Wahren
[ Upstream commit a4690afeb0d2d7ba4d60dfa98a89f3bb1ce60ecd ] ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net: qca_spi: Don't clear IFF_BROADCASTStefan Wahren
[ Upstream commit 2b70bad23c89b121a3e4a00f8968d14ebb78887d ] Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST. So fix this by keeping the flags from ether_setup. Reported-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12net: jme: fix suspend/resume on JMC260Diego Viola
[ Upstream commit ee50c130c82175eaa0820c96b6d3763928af2241 ] The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351 Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12can: fix oops caused by wrong rtnl dellink usageOliver Hartkopp
[ Upstream commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 ] For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12can: fix handling of unmodifiable configuration options fixOliver Hartkopp
[ Upstream commit bce271f255dae8335dc4d2ee2c4531e09cc67f5a ] With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12can: at91_can: RX queue could get stuck at high bus loadWolfgang Grandegger
[ Upstream commit 43200a4480cbbe660309621817f54cbb93907108 ] At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Tested-by: Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-12can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone ↵Thor Thayer
access [ Upstream commit 427460c83cdf55069eee49799a0caef7dde8df69 ] When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-19mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNALMartin Willi
[ Upstream commit 62397da50bb20a6b812c949ef465d7e69fe54bb6 ] A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Cc: stable@vger.kernel.org Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-06rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in ↵Sasha Levin
rtl_pci_reset_trx_ring [ Upstream commit cf968937d27751296920e6b82ffa89735e3a0023 ] We can't use kfree_skb in irq disable context, because spin_lock_irqsave make sure we are always in irq disable context, use dev_kfree_skb_irq instead of kfree_skb is better than dev_kfree_skb_any. This patch fix below kernel warning: [ 7612.095528] ------------[ cut here ]------------ [ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80() [ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common [ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4 [ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015 [ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454 [ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400 [ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8 [ 7612.095604] Call Trace: [ 7612.095614] [<c12ce7c5>] dump_stack+0x41/0x5c [ 7612.095620] [<c104cc59>] warn_slowpath_common+0x89/0xc0 [ 7612.095628] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095634] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80 [ 7612.095640] [<c104ccad>] warn_slowpath_null+0x1d/0x20 [ 7612.095646] [<c10508a8>] __local_bh_enable_ip+0x58/0x80 [ 7612.095653] [<c16b7d34>] destroy_conntrack+0x64/0xa0 [ 7612.095660] [<c16b300f>] nf_conntrack_destroy+0xf/0x20 [ 7612.095665] [<c1677565>] skb_release_head_state+0x55/0xa0 [ 7612.095670] [<c16775bb>] skb_release_all+0xb/0x20 [ 7612.095674] [<c167760b>] __kfree_skb+0xb/0x60 [ 7612.095679] [<c16776f0>] kfree_skb+0x30/0x70 [ 7612.095686] [<f81b869d>] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095692] [<f81b869d>] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci] [ 7612.095698] [<f81b87f9>] rtl_pci_start+0x19/0x190 [rtl_pci] [ 7612.095705] [<f81970e6>] rtl_op_start+0x56/0x90 [rtlwifi] [ 7612.095712] [<c17e3f16>] drv_start+0x36/0xc0 [ 7612.095717] [<c17f5ab3>] ieee80211_do_open+0x2d3/0x890 [ 7612.095725] [<c16820fe>] ? call_netdevice_notifiers_info+0x2e/0x60 [ 7612.095730] [<c17f60bd>] ieee80211_open+0x4d/0x50 [ 7612.095736] [<c16891b3>] __dev_open+0xa3/0x130 [ 7612.095742] [<c183fa53>] ? _raw_spin_unlock_bh+0x13/0x20 [ 7612.095748] [<c1689499>] __dev_change_flags+0x89/0x140 [ 7612.095753] [<c127c70d>] ? selinux_capable+0xd/0x10 [ 7612.095759] [<c1689589>] dev_change_flags+0x29/0x60 [ 7612.095765] [<c1700b93>] devinet_ioctl+0x553/0x670 [ 7612.095772] [<c12db758>] ? _copy_to_user+0x28/0x40 [ 7612.095777] [<c17018b5>] inet_ioctl+0x85/0xb0 [ 7612.095783] [<c166e647>] sock_ioctl+0x67/0x260 [ 7612.095788] [<c166e5e0>] ? sock_fasync+0x80/0x80 [ 7612.095795] [<c115c99b>] do_vfs_ioctl+0x6b/0x550 [ 7612.095800] [<c127c812>] ? selinux_file_ioctl+0x102/0x1e0 [ 7612.095807] [<c10a8914>] ? timekeeping_suspend+0x294/0x320 [ 7612.095813] [<c10a256a>] ? __hrtimer_run_queues+0x14a/0x210 [ 7612.095820] [<c1276e24>] ? security_file_ioctl+0x34/0x50 [ 7612.095827] [<c115cef0>] SyS_ioctl+0x70/0x80 [ 7612.095832] [<c1001804>] do_fast_syscall_32+0x84/0x120 [ 7612.095839] [<c183ff91>] sysenter_past_esp+0x36/0x55 [ 7612.095844] ---[ end trace 97e9c637a20e8348 ]--- Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: Stable <stable@vger.kernel.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-06rtlwifi: Fix logic error in enter/exit power-save modeSasha Levin
[ Upstream commit 873ffe154ae074c46ed2d72dbd9a2a99f06f55b4 ] In commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), the tests for enter/exit power-save mode were inverted. With this change applied, the wifi connection becomes much more stable. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Signed-off-by: Wang YanQing <udknight@gmail.com> CC: Stable <stable@vger.kernel.org> [3.10+] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-03can: fix handling of unmodifiable configuration optionsOliver Hartkopp
[ Upstream commit bb208f144cf3f59d8f89a09a80efd04389718907 ] As described in 'can: m_can: tag current CAN FD controllers as non-ISO' (6cfda7fbebe) it is possible to define fixed configuration options by setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'. This leads to the incovenience that the fixed configuration bits can not be passed by netlink even when they have the correct values (e.g. non-ISO, FD). This patch fixes that issue and not only allows fixed set bit values to be set again but now requires(!) to provide these fixed values at configuration time. A valid CAN FD configuration consists of a nominal/arbitration bittiming, a data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now enforced by a new can_validate() function. This fix additionally removed the inconsistency that was prohibiting the support of 'CANFD-only' controller drivers, like the RCar CAN FD. For this reason a new helper can_set_static_ctrlmode() has been introduced to provide a proper interface to handle static enabled CAN controller options. Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Cc: <stable@vger.kernel.org> # >= 3.18 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-03ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)
[ Upstream commit 0f9edcdd88a993914fa1d1dc369b35dc503979db ] The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-01rtlwifi: rtl8723be: Fix module parameter initializationSasha Levin
[ Upstream commit 7079604ddb83f428359feace3aeaf8a9f435be4a ] This driver has a number of errors in the module initialization. These include the following: Parameter msi_support is stored in two places - one is removed. Paramters sw_crypto and disable_watchdog were never stored in the final locations, nor were they initialized properly. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-06-01ath5k: Change led pin configuration for compaq c700 laptopJoseph Salisbury
[ Upstream commit 7b9bc799a445aea95f64f15e0083cb19b5789abe ] BugLink: http://bugs.launchpad.net/bugs/972604 Commit 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") added a pin configuration for the Compaq c700 laptop. However, the polarity of the led pin is reversed. It should be red for wifi off and blue for wifi on, but it is the opposite. This bug was reported in the following bug report: http://pad.lv/972604 Fixes: 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18rapidio/rionet: fix deadlock on SMPAurelien Jacquiot
[ Upstream commit 36915976eca58f2eefa040ba8f9939672564df61 ] Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-18net: mvneta: enable change MAC address when interface is upDmitri Epshtein
[ Upstream commit 928b6519afeb2a5e2dc61154380b545ed66c476a ] Function eth_prepare_mac_addr_change() is called as part of MAC address change. This function check if interface is running. To enable change MAC address when interface is running: IFF_LIVE_ADDR_CHANGE flag must be set to dev->priv_flags field Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: stable@vger.kernel.org Signed-off-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-04-12net: irda: Fix use-after-free in irtty_open()Peter Hurley
[ Upstream commit 401879c57f01cbf2da204ad2e8db910525c6dbea ] The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-20can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()Maximilain Schneider
[ Upstream commit e9a2d81b1761093386a0bb8a4f51642ac785ef63 ] gs_destroy_candev() erroneously calls kfree() on a struct gs_can *, which is allocated through alloc_candev() and should instead be freed using free_candev() alone. The inappropriate use of kfree() causes the kernel to hang when gs_destroy_candev() is called. Only the struct gs_usb * which is allocated through kzalloc() should be freed using kfree() when the device is disconnected. Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-20iwlwifi: mvm: inc pending frames counter also when txing non-staLiad Kaufman
[ Upstream commit fb896c44f88a75843a072cd6961b1615732f7811 ] Until this patch, when TXing non-sta the pending_frames counter wasn't increased, but it WAS decreased in iwl_mvm_rx_tx_cmd_single(), what makes it negative in certain conditions. This in turn caused much trouble when we need to remove the station since we won't be waiting forever until pending_frames gets 0. In certain cases, we were exhausting the station table even in BSS mode, because we had a lot of stale stations. Increase the counter also in iwl_mvm_tx_skb_non_sta() after a successful TX to avoid this outcome. CC: <stable@vger.kernel.org> [3.18+] Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-13iwlwifi: pcie: support loading FW with extended mem rangeArik Nemtsov
[commit fe45773b5baa154468416aac1304f6325939f775 upstream] Toggle the LMPM_CHICK register when writing chunks into the FW's extended SRAM. This tells the FW to put the chunk into a different memory space. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-08can: ems_usb: Fix possible tx overflowGerhard Uttenthaler
[ Upstream commit 90cfde46586d2286488d8ed636929e936c0c9ab2 ] This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-03-07iwlwifi: mvm: don't allow sched scans without matches to be startedSasha Levin
[ Upstream commit 5e56276e7555b34550d51459a801ff75eca8b907 ] The firmware can perform a scheduled scan with not matchsets passed, but it can't send notification that results were found. Since the userspace then cannot know when we got new results and the firmware wouldn't trigger a wake in case we are sleeping, it's better not to allow scans without matchsets. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=110831 Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [SL: Backport to 4.1] Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-02-15xen-netfront: update num_queues to real createdJoe Jin
[ Upstream commit ca88ea1247dfee094e2467a3578eaec9bdf0833a ] Sometimes xennet_create_queues() may failed to created all requested queues, we need to update num_queues to real created to avoid NULL pointer dereference. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>