summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/broadcom
AgeCommit message (Collapse)Author
2021-09-28Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback"Soeren Moch
This reverts commit b0b524f079a23e440dd22b04e369368dde847533. Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev as fallback") changes country setup to directly use ISO3166 country codes if no more specific code is configured. This was done under the assumption that brcmfmac firmwares can handle such simple direct mapping from country codes to firmware ccode values. Unfortunately this is not true for all chipset/firmware combinations. E.g. BCM4359/9 devices stop working as access point with this change, so revert the offending commit to avoid the regression. Signed-off-by: Soeren Moch <smoch@web.de> Cc: stable@vger.kernel.org # 5.14.x Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210926201905.211605-1-smoch@web.de
2021-08-29brcmfmac: pcie: fix oops on failure to resume and reprobeAhmad Fatoum
When resuming from suspend, brcmf_pcie_pm_leave_D3 will first attempt a hot resume and then fall back to removing the PCI device and then reprobing. If this probe fails, the kernel will oops, because brcmf_err, which is called to report the failure will dereference the stale bus pointer. Open code and use the default bus-less brcmf_err to avoid this. Fixes: 8602e62441ab ("brcmfmac: pass bus to the __brcmf_err() in pcie.c") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210817063521.22450-1-a.fatoum@pengutronix.de
2021-08-29brcmfmac: Add WPA3 Personal with FT to supported cipher suitesPaweł Drewniak
This allows the driver to connect to BSSIDs supporting SAE with 802.11r. Tested on Raspberry Pi 4 Model B (STA) and UniFi 6LR/OpenWRT 21.02.0-rc2. AP was set to 'sae-mixed' (WPA2/3 Personal). Signed-off-by: Paweł Drewniak <czajernia@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210824221330.3847139-1-czajernia@gmail.com
2021-08-21brcmsmac: make array addr static const, makes object smallerColin Ian King
Don't populate the array addr on the stack but instead it static const. Makes the object code smaller by 79 bytes: Before: text data bss dec hex filename 176015 54652 128 230795 3858b .../broadcom/brcm80211/brcmsmac/main.o After: text data bss dec hex filename 175872 54716 128 230716 3853c .../broadcom/brcm80211/brcmsmac/main.o (gcc version 10.3.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210819125552.8888-1-colin.king@canonical.com
2021-08-21brcmfmac: add 43752 SDIO ids and initializationAngus Ainslie
Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie <angus@akkea.ca> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca
2021-08-21brcmfmac: Set SDIO workqueue as WQ_HIGHPRISean Anderson
This puts tasks submitted to the SDIO workqueue at the head of the queue and runs them immediately. This gets higher RX throughput with the SDIO bus. This was originally submitted as [1]. The original author Wright Feng reports > throughput result with 43455(11ac) on 1 core 1.6 Ghz platform is > Without WQ_HIGGPRI TX/RX: 293/301 (mbps) > With WQ_HIGHPRI TX/RX: 293/321 (mbps) I tested this with a 43364(11bgn) on a 1 core 800 MHz platform and got Without WQ_HIGHPRI TX/RX: 16/19 (Mbits/sec) With WQ_HIGHPRI TX/RX: 24/20 (MBits/sec) [1] https://lore.kernel.org/linux-wireless/1584604406-15452-4-git-send-email-wright.feng@cypress.com/ Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Arend van Spriel <aspriel@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210802170904.3116223-1-sean.anderson@seco.com
2021-08-21brcmfmac: use separate firmware for 43430 revision 2Mikhail Rudenko
A separate firmware is needed for Broadcom 43430 revision 2. This chip can be found in e.g. certain revisions of Ampak AP6212 wireless IC. Original firmware file from IC vendor is named 'fw_bcm43436b0.bin', but brcmfmac and also btbcm drivers report chip id 43430, so requested firmware file name is 'brcmfmac43430b0-sdio.bin' in line with other 43430 revisions. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210804231308.576071-1-mike.rudenko@gmail.com
2021-08-21brcmfmac: support chipsets with different core enumeration spaceArend van Spriel
Historically the broadcom wifi chipsets always had enumeration space containing all core information at same place. However, for new chipsets the ASIC developers moved away from that given fact. So we have to accommodate that it can differ per chipset. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-5-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: add xtlv support to firmware interface layerArend van Spriel
Newer firmware API require commands to use xtlv format. Add support for that in the firmware interface layer. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-4-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: increase core revision column aligning core listArend van Spriel
Some cores are getting a revision greater that 99 thus messing up the column alignment in the list of cores. So adding a digit for the core revision. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-3-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: use different error value for invalid ram base addressArend van Spriel
The function brcmf_chip_tcm_rambase() returns 0 as invalid ram base address. However, upcoming chips have ram base address starting at zero so we have to find a more appropriate invalid value to return. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1627505434-9544-2-git-send-email-arend.vanspriel@broadcom.com
2021-08-21brcmfmac: firmware: Fix firmware loadingLinus Walleij
The patch that would first try the board-specific firmware had a bug because the fallback would not be called: the asynchronous interface is used meaning request_firmware_nowait() returns 0 immediately. Harden the firmware loading like this: - If we cannot build an alt_path (like if no board_type is specified) just request the first firmware without any suffix, like in the past. - If the lookup of a board specific firmware fails, we get a NULL fw in the async callback, so just try again without the alt_path from a dedicated brcm_fw_request_done_alt_path callback. - Drop the unnecessary prototype of brcm_fw_request_done. - Added MODULE_FIRMWARE match for per-board SDIO bins, making userspace tools to pull all the relevant firmware files. Fixes: 5ff013914c62 ("brcmfmac: firmware: Allow per-board firmware binaries") Cc: Stefan Hansson <newbyte@disroot.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210808180510.8753-1-digetx@gmail.com
2021-08-01brcmfmac: firmware: Allow per-board firmware binariesLinus Walleij
After some crashes in the 3D engine (!) on the Samsung GT-I8530 it turns out that the main firmware file can be device dependent, something that was previously only handled for the NVRAM parameter file. Rewrite the code a bit so we can a per-board suffixed firmware binary as well, if this does not exist we fall back to the canonical firmware name. Example: a 4330 device with the OF board compatible is "samsung,gavini". We will first try "brcmfmac4330-sdio.samsung,gavini.bin" then "brcmfmac4330-sdio.bin" if that does not work. Cc: phone-devel@vger.kernel.org Cc: newbyte@disroot.org Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210711231659.255479-1-linus.walleij@linaro.org
2021-07-05Merge tag 'driver-core-5.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg KH: "Here is the small set of driver core and debugfs updates for 5.14-rc1. Included in here are: - debugfs api cleanups (touched some drivers) - devres updates - tiny driver core updates and tweaks Nothing major in here at all, and all have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits) docs: ABI: testing: sysfs-firmware-memmap: add some memmap types. devres: Enable trace events devres: No need to call remove_nodes() when there none present devres: Use list_for_each_safe_from() in remove_nodes() devres: Make locking straight forward in release_nodes() kernfs: move revalidate to be near lookup drivers/base: Constify static attribute_group structs firmware_loader: remove unneeded 'comma' macro devcoredump: remove contact information driver core: Drop helper devm_platform_ioremap_resource_wc() component: Rename 'dev' to 'parent' component: Drop 'dev' argument to component_match_realloc() device property: Don't check for NULL twice in the loops driver core: auxiliary bus: Fix typo in the docs drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO debugfs: remove return value of debugfs_create_ulong() debugfs: remove return value of debugfs_create_bool() scsi: snic: debugfs: remove local storage of debugfs files b43: don't save dentries for debugfs b43legacy: don't save dentries for debugfs ...
2021-06-24brcmfmac: support parse country code map from DTShawn Guo
With any regulatory domain requests coming from either user space or 802.11 IE (Information Element), the country is coded in ISO3166 standard. It needs to be translated to firmware country code and revision with the mapping info in settings->country_codes table. Support populate country_codes table by parsing the mapping from DT. The BRCMF_BUSTYPE_SDIO bus_type check gets separated from general DT validation, so that country code can be handled as general part rather than SDIO bus specific one. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210417075428.2671-1-shawn.guo@linaro.org
2021-06-23brcmfmac: Silence error messages about unsupported firmware featuresDmitry Osipenko
KMSG is flooded with error messages about unsupported firmware features of BCM4329 chip. The GET_ASSOCLIST error became especially noisy with a newer NetworkManager version of Ubuntu 21.04. Turn the noisy error messages into info messages and print them out only once. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511211549.30571-2-digetx@gmail.com
2021-06-15brcmsmac: Remove the repeated declarationShaokun Zhang
Function 'brcms_c_stf_phy_txant_upd' are declared twice, remove the repeated declaration. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1621844443-38290-1-git-send-email-zhangshaokun@hisilicon.com
2021-06-15brcmsmac: mac80211_if: Fix a resource leak in an error handling pathChristophe JAILLET
If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()' as already done in the remove function. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.1620852921.git.christophe.jaillet@wanadoo.fr
2021-06-15brcmsmac: Drop unnecessary NULL check after container_ofGuenter Roeck
The parameter passed to ai_detach() is guaranteed to never be NULL because it is checked by the caller. Consequently, the result of container_of() on it is also never NULL, and a NULL check on it is unnecessary. Even without that, the NULL check would still be unnecessary because the subsequent kfree() can handle NULL arguments. On top of all that, it is misleading to check the result of container_of() against NULL because the position of the contained element could change, which would make the check invalid. Remove it. This change was made automatically with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511235629.1686038-1-linux@roeck-us.net
2021-06-15brcmsmac: improve readability on addresses copyÍñigo Huguet
A static analyzer identified as a potential bug the copy of 12 bytes from a 6 bytes array to a 6 bytes array. Both arrays are 6 bytes addresses. Although not being a real bug, it is not immediately clear why is done this way: next 6 bytes address, contiguous to the first one, must also be copied to next contiguous 6 bytes address of the destination. Copying each one separately will make both static analyzers and reviewers happier. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511070257.7843-1-ihuguet@redhat.com
2021-06-15brcmfmac: Add clm_blob firmware files to modinfoMatthias Brugger
Cypress Wi-Fi chipsets include information regarding regulatory constraints. These are provided to the driver through "Country Local Matrix" (CLM) blobs. Files present in Linux firmware repository are on a generic world-wide safe version with conservative power settings which is designed to comply with regulatory but may not provide best performance on all boards. Never the less, a better functionality can be expected with the file present, so add it to the modinfo of the driver. Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210607103433.21022-1-matthias.bgg@kernel.org
2021-06-15brcmfmac: Delete second brcm folder hierarchyMatthias Brugger
BRCMF_FW_DEFAULT_PATH already defines the brcm folder, delete the second folder to match with Linux firmware repository layout. Fixes: 75729e110e68 ("brcmfmac: expose firmware config files through modinfo") Signed-off-by: Matthias Brugger <mbrugger@suse.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210602144305.4481-1-matthias.bgg@kernel.org
2021-06-15brcmfmac: Fix a double-free in brcmf_sdio_bus_resetTong Tiangen
brcmf_sdiod_remove has been called inside brcmf_sdiod_probe when fails, so there's no need to call another one. Otherwise, sdiodev->freezer would be double freed. Fixes: 7836102a750a ("brcmfmac: reset SDIO bus on a firmware crash") Signed-off-by: Tong Tiangen <tongtiangen@huawei.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210601100128.69561-1-tongtiangen@huawei.com
2021-06-15brcmfmac: Demote non-compliant kernel-doc headersYang Shen
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:2040: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:1295: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210517050141.61488-5-shenyang39@huawei.com
2021-06-15brcmfmac: correctly report average RSSI in station infoAlvin Šipraga
The rx_lastpkt_rssi field provided by the firmware is suitable for NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an average. Fix up the assignments and set the correct STA_INFO bits. This lets userspace know that the average RSSI is part of the station info. Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk
2021-06-15brcmfmac: fix setting of station info chains bitmaskAlvin Šipraga
The sinfo->chains field is a bitmask for filled values in chain_signal and chain_signal_avg, not a count. Treat it as such so that the driver can properly report per-chain RSSI information. Before (MIMO mode): $ iw dev wlan0 station dump ... signal: -51 [-51] dBm After (MIMO mode): $ iw dev wlan0 station dump ... signal: -53 [-53, -54] dBm Fixes: cae355dc90db ("brcmfmac: Add RSSI information to get_station.") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210506132010.3964484-1-alsi@bang-olufsen.dk
2021-06-15brcmfmac: use ISO3166 country code and 0 rev as fallbackShawn Guo
Instead of aborting country code setup in firmware, use ISO3166 country code and 0 rev as fallback, when country_codes mapping table is not configured. This fallback saves the country_codes table setup for recent brcmfmac chipsets/firmwares, which just use ISO3166 code and require no revision number. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210425110200.3050-1-shawn.guo@linaro.org
2021-06-03b43legacy: Fix spelling mistake "overflew" -> "overflowed"Colin Ian King
There is a spelling mistake in a comment. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210601102855.8884-1-colin.king@canonical.com
2021-06-03b43legacy: Remove unused inline function txring_to_priority()YueHaibing
commit 5d07a3d62f63 ("b43legacy: Avoid packet losses in the dma worker code") left behind this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210529115131.6028-1-yuehaibing@huawei.com
2021-06-03b43: phy_n: Delete some useless TODO codeZhen Lei
These TODO empty code are added by commit 9442e5b58edb ("b43: N-PHY: partly implement SPUR workaround"). It's been more than a decade now. I don't think anyone who wants to perfect this workaround can follow this TODO tip exactly. Instead, it limits them to new thinking. Remove it will be better. No functional change. By the way, this helps reduce some binary code size. Before: text data bss dec hex 74472 9967 0 84439 149d7 After: text data bss dec hex 74408 9919 0 84327 14967 Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210511034203.4122-2-thunder.leizhen@huawei.com
2021-05-31Merge 5.13-rc4 into driver-core-nextGreg Kroah-Hartman
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21b43: don't save dentries for debugfsGreg Kroah-Hartman
There is no need to keep around the dentry pointers for the debugfs files as they will all be automatically removed when the subdir is removed. So save the space and logic involved in keeping them around by just getting rid of them entirely. By doing this change, we remove one of the last in-kernel user that was storing the result of debugfs_create_bool(), so that api can be cleaned up. Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Chao Yu <chao@kernel.org> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: b43-dev@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210518163304.3702015-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21b43legacy: don't save dentries for debugfsGreg Kroah-Hartman
There is no need to keep around the dentry pointers for the debugfs files as they will all be automatically removed when the subdir is removed. So save the space and logic involved in keeping them around by just getting rid of them entirely. By doing this change, we remove one of the last in-kernel user that was storing the result of debugfs_create_bool(), so that api can be cleaned up. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: b43-dev@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210518163309.3702100-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13brcmfmac: properly check for bus register errorsGreg Kroah-Hartman
The brcmfmac driver ignores any errors on initialization with the different busses by deferring the initialization to a workqueue and ignoring all possible errors that might happen. Fix up all of this by only allowing the module to load if all bus registering worked properly. Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13Revert "brcmfmac: add a check for the status of usb_register"Greg Kroah-Hartman
This reverts commit 42daad3343be4a4e1ee03e30a5f5cc731dadfef5. Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not. Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change. The original commit here did nothing to actually help if usb_register() failed, so it gives a "false sense of security" when there is none. The correct solution is to correctly unwind from this error. Cc: Kangjie Lu <kjlu@umn.edu> Cc: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210503115736.2104747-69-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22brcmfmac: Avoid GFP_ATOMIC when GFP_KERNEL is enoughChristophe JAILLET
A workqueue is not atomic, so constraints can be relaxed here. GFP_KERNEL can be used instead of GFP_ATOMIC. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b6e619415db4ee5de95389280d7195bb56e45f77.1618860716.git.christophe.jaillet@wanadoo.fr
2021-04-20Merge tag 'mac80211-next-for-net-next-2021-04-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Another set of updates, all over the map: * set sk_pacing_shift for 802.3->802.11 encap offload * some monitor support for 802.11->802.3 decap offload * HE (802.11ax) spec updates * userspace API for TDLS HE support * along with various other small features, cleanups and fixups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19cfg80211: constify ieee80211_get_response_rate returnJoe Perches
It's not modified so make it const with the eventual goal of moving data to text for various static struct ieee80211_rate arrays. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8b210b5f5972e39eded269b35a1297cf824c4181.camel@perches.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-18brcmfmac: Remove duplicate struct declarationWan Jiabing
struct brcmf_bus is declared twice. One has been declared at 37th line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210331023557.2804128-2-wanjiabing@vivo.com
2021-04-18brcmfmac: A typo fixBhaskar Chowdhury
s/revsion/revision/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210323043657.1466296-1-unixbhaskar@gmail.com
2021-04-07Merge tag 'wireless-drivers-2021-04-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.12 Third, and last, set of fixes for v5.12. Small fixes, iwlwifi having most of them. brcmfmac regression caused by cfg80211 changes is the most important here. iwlwifi * fix a lockdep warning * fix regulatory feature detection in certain firmware versions * new hardware support * fix lockdep warning * mvm: fix beacon protection checks mt76 * mt7921: fix airtime reporting brcmfmac * fix a deadlock regression ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23brcmfmac: p2p: Fix recently introduced deadlock issueHans de Goede
Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") replaced the rtnl_lock parameter passed to various brcmf functions with just lock, because since that commit it is not just about the rtnl_lock but also about the wiphy_lock . During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c was accidentally replaced with "if (locked)", dropping the inversion of the check. This causes the code to now call rtnl_lock() while already holding the lock, causing a deadlock. Add back the "!" to the if-condition to fix this. Cc: Johannes Berg <johannes.berg@intel.com> Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-15b43: N-PHY: Fix the update of coef for the PHY revision >= 3caseColin Ian King
The documentation for the PHY update [1] states: Loop 4 times with index i If PHY Revision >= 3 Copy table[i] to coef[i] Otherwise Set coef[i] to 0 the copy of the table to coef is currently implemented the wrong way around, table is being updated from uninitialized values in coeff. Fix this by swapping the assignment around. [1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/ Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration") Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11brcmsmac: Fix the spelling configation to configuration in the file d11.hBhaskar Chowdhury
s/configation/configuration/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209232921.1255425-1-unixbhaskar@gmail.com
2021-02-09brcmfmac: add support for CQM RSSI notificationsAlvin Šipraga
Add support for CQM RSSI measurement reporting and advertise the NL80211_EXT_FEATURE_CQM_RSSI_LIST feature. This enables a userspace supplicant such as iwd to be notified of changes in the RSSI for roaming and signal monitoring purposes. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210208125738.3546557-1-alsi@bang-olufsen.dk
2021-02-08brcmsmac: fix alignment constraintsArnd Bergmann
sturct d11txh contains a ieee80211_rts structure, which is required to have at least two byte alignment, and this conflicts with the __packed attribute: drivers/net/wireless/broadcom/brcm80211/brcmsmac/d11.h:786:1: warning: alignment 1 of 'struct d11txh' is less than 2 [-Wpacked-not-aligned] Mark d11txh itself as having two-byte alignment to ensure the inner structure is properly aligned. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210204162852.3219572-1-arnd@kernel.org
2021-02-08brcmfmac: Add DMI nvram filename quirk for Voyo winpad A15 tabletHans de Goede
The Voyo winpad A15 tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: rcmfmac4330-sdio.To be filled by O.E.M.-To be filled by O.E.M..txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Voyo winpad A15 tablet. While preparing a matching linux-firmware update I noticed that the nvram is identical to the nvram used on the Prowise-PT301 tablet, so the new DMI quirk entry simply points to the already existing Prowise-PT301 nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-2-hdegoede@redhat.com
2021-02-08brcmfmac: Add DMI nvram filename quirk for Predia Basic tabletHans de Goede
The Predia Basic tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: brcmfmac43340-sdio.Insyde-CherryTrail.txt as nvram file which is a bit too generic. Add a DMI quirk so that a unique and clearly identifiable nvram file name is used on the Predia Basic tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210129171413.139880-1-hdegoede@redhat.com