summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k
AgeCommit message (Collapse)Author
2015-01-16ath9k: fix BE/BK queue orderFelix Fietkau
commit 78063d81d353e10cbdd279c490593113b8fdae1c upstream. Hardware queues are ordered by priority. Use queue index 0 for BK, which has lower priority than BE. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-16ath9k_hw: fix hardware queue allocationFelix Fietkau
commit ad8fdccf9c197a89e2d2fa78c453283dcc2c343f upstream. The driver passes the desired hardware queue index for a WMM data queue in qinfo->tqi_subtype. This was ignored in ath9k_hw_setuptxqueue, which instead relied on the order in which the function is called. Reported-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06ath9k: Fix RTC_DERIVED_CLK usageMiaoqing Pan
commit 4e6ce4dc7ce71d0886908d55129d5d6482a27ff9 upstream. Based on the reference clock, which could be 25MHz or 40MHz, AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550. But, when a chip reset is done, processing the initvals sets the register back to the default value. Fix this by moving the code in ath9k_hw_init_pll() to ar9003_hw_override_ini(). Also, do this override for AR9531. Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-07ath9k: fix aggregation session lockupFelix Fietkau
commit c01fac1c77a00227f706a1654317023e3f4ac7f0 upstream. If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-13ath9k: fix ready time of the multicast buffer queueFelix Fietkau
commit 3b3e0efb5c72c4fc940af50b33626b8a78a907dc upstream. qi->tqi_readyTime is written directly to registers that expect microseconds as unit instead of TU. When setting the CABQ ready time, cur_conf->beacon_interval is in TU, so convert it to microseconds before passing it to ath9k_hw. This should hopefully fix some Tx DMA issues with buffered multicast frames in AP mode. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-13ath9k: Fix sequence number assignment for non-data framesHelmut Schaa
Since commit 558ff225de80ac95b132d3a115ddadcd64498b4f (ath9k: fix ps-poll responses under a-mpdu sessions) non-data frames would have gotten a sequence number from a TIDs sequence counter instead of using the global sequence counter. This can lead to instable connections. To fix this only select the correct TID if we are processing a data frame. Furthermore, prevent non-data frames to get a sequence number from a TID sequence counter by adding a check to ath_tx_setup_buffer. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-13ath9k_hw: fix unreachable code in baseband hang detection codeFelix Fietkau
The commit "ath9k: reduce baseband hang detection false positive rate" added a delay in the loop checking the baseband state, however it was unreachable due to previous 'continue' statements. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-25ath9k: fix invalid descriptor discardingFelix Fietkau
Only set sc->rx.discard_next to rx_stats->rs_more when actually discarding the current descriptor. Also, fix a detection of broken descriptors: First the code checks if the current descriptor is not done. Then it checks if the next descriptor is done. Add a check that afterwards checks the first descriptor again, because it might have been completed in the mean time. This fixes a regression introduced in commit 723e711356b5a8a95728a890e254e8b0d47b55cf "ath9k: fix handling of broken descriptors" Cc: stable@vger.kernel.org Reported-by: Marco André Dinis <marcoandredinis@gmail.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-25ath9k: reduce baseband hang detection false positive rateFelix Fietkau
Check if the baseband state remains stable, and add a small delay between register reads. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-24ath9k: fix ps-poll responses under a-mpdu sessionsFelix Fietkau
When passing tx frames to the U-APSD queue for powersave poll responses, the ath_atx_tid pointer needs to be passed to ath_tx_setup_buffer for proper sequence number accounting. This fixes high latency and connection stability issues with ath9k running as AP and a few kinds of mobile phones as client, when PS-Poll is heavily used Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-20ath9k: Fix ETSI compliance for AR9462 2.0Sujith Manoharan
The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Cc: stable@vger.kernel.org Reported-by: Jeang Daniel <dyjeong@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-20ath9k: protect tid->sched checkStanislaw Gruszka
We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That is race condition which can result of doing list_del(&tid->list) twice (second time with poisoned list node) and cause crash like shown below: [424271.637220] BUG: unable to handle kernel paging request at 00100104 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k] ... [424271.639953] Call Trace: [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k] [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k] [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211] [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211] [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211] [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211] [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211] [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211] [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k] [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211] [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k] Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=70551 Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k: Fix TX power calculationSujith Manoharan
The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template" fixed the incorrect values in the eeprom templates, but if boards have already been calibrated with incorrect values, they would still be using the wrong TX power. Fix this by assigning a default value in such cases. Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k: Do not support PowerSave by defaultSujith Manoharan
Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k: Fix build error on ARMSujith Manoharan
Use mdelay instead of udelay to fix this error: ERROR: "__bad_udelay" [drivers/net/wireless/ath/ath9k/ath9k_hw.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k_htc: avoid scheduling while atomic on sta_rc_updateStanislaw Gruszka
mac80211 ->sta_rc_update() callback must be atomic. Since we have to take mutex and do other operations that can sleep when sending fimrware commands to device, the only option to satisfy atomicity requirement of ->sta_rc_update(), that I can see, is introduce work_struct and defer uploading new rates to that work. Tested-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k_htc: Do not support PowerSave by defaultOleksij Rempel
It is a copy/paste of patch provided by Sujith for ath9k. "Even though we make sure PowerSave is not enabled by default by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init, PS could be enabled by userspace based on various factors like battery usage etc. Since PS in ath9k is just broken and has been untested for years, remove support for it, but allow a user to explicitly enable it using a module parameter." Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-04ath9k_htc: make ->sta_rc_update atomic for most callsStanislaw Gruszka
sta_rc_update() callback must be atomic, hence we can not take mutexes or do other operations, which can sleep in ath9k_htc_sta_rc_update(). I think we can just return from ath9k_htc_sta_rc_update(), if it is called without IEEE80211_RC_SUPP_RATES_CHANGED bit. That will help with scheduling while atomic bug for most cases (except mesh and IBSS modes). For mesh and IBSS I do not see other solution like creating additional workqueue, because sending firmware command require us to sleep, but this can be done in additional patch. Patch partially fixes bug: https://bugzilla.redhat.com/show_bug.cgi?id=990955 Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23ath9k: Fix RX interrupt mitigationSujith Manoharan
The threshold values for RX interrupt mitigation are different for AR9003 and AR9002 families. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23ath9k: Fix code mistakeSujith Manoharan
The commit "ath9k: Process GTT interrupts" accidentally had a line that was commented out. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-16ath9k_htc: use ath_is_mybeaconOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-16ath9k: use ath_is_mybeaconOleksij Rempel
This patch will also change behavior of rx_beacons statistic. Instead of collecting all received beacons, it will collect only ours. This, IMO make more sense, since for troubleshooting we will need to know count of our beacons, or both. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-16ath9k: Fix possible overflow conditionSujith Manoharan
Prevent a possible overflow condition which results in occasional bad IQ coefficients and EVM numbers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-16ath9k: Fix IQ calibrationSujith Manoharan
This patch fixes a bug in the TX IQ calibration post processing routine because of which the driver disables TX IQ correction even though the calibration results are valid. This fix is applicable for all chips in the AR9003 family. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-16ath9k: Fix error reported by smatchSujith Manoharan
debug_sta.c: ath_debug_rate_stats() error: buffer overflow 'rstats->ht_stats' 24 <= 24 Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Process GTT interruptsSujith Manoharan
Global Transmission Timeout interrupts are generated by the HW when transmission of a frame fails - this is done based on the threshold programmed in the AR_GTXTO register. Currently, even though the interrupt is enabled for all chips, it is not handled in the driver. This patch handles GTT events for AR9003 and above chips, checking if the MAC/BB has hung after successive GTT interrupts crosses a threshold (5). This can be enabled for the older chips in the AR9002 family once appropriate HW hang checks are implemented for them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Remove debug print in ISRSujith Manoharan
There is no need to do this and we can avoid an unused variable warning when CONFIG_ATH9K_WOW is not selected. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Add a debugfs file "node_recv"Sujith Manoharan
This would be useful when debugging RX performance issues. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Use a separate debugfs file for PHY errorsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Show only active TIDs in node_aggrSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath9k: Add an option for station statisticsSujith Manoharan
Also, rename node_stat to node_aggr. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2014-01-09ath9k: Disable cross-band FCCSujith Manoharan
Fast Channel Change across bands was enabled for AR9462 recently, but this is causing baseband issues. Disable it until this feature is tested well. Also, remove the feature bit for AR9565 since it is a single-band card and doesn't support this feature. Cc: stable@vger.kernel.org Reported-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-09ath9k: Use correct channel for RX packetsSujith Manoharan
Accessing the current channel definition in mac80211 when processing RX packets is problematic because it could have been updated when a scan is issued. Since a channel change involves flushing the existing packets in the RX queue before a chip-reset is done, they would be processed using the wrong band/channel information. To avoid this, use the current channel information maintained in the driver. Cc: stable@vger.kernel.org Reported-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-09ath9k: Update WB335 PCI IDsSujith Manoharan
* Add new AR9565 1.0/1.0.1/1.1 IDs * Change Dell/Lenovo/Samsung cards to 2-Antenna with diversity. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-07mac80211: remove channel_change_timeJohannes Berg
This value is no longer used by mac80211, and practically no driver ever set it to a correct value anyway, so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-01-03ath9k: Fix regulatory complianceSujith Manoharan
The maximum permissible values for noise floor in ETSI and Japan domains have been updated with new EU regulations for CCA detection. Adjust the values in the driver accordingly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix AR955x RX sensitivitySujith Manoharan
AR955x has problems with RX sensitivity in 2G. This patch adds a routine to select range_osdac dynamically on a per-chain basis to address this issue. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add hardware support for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Initialize QCA953x INI arraysSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add QCA953x initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Assign macVersion for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Add version/revision macros for QCA9531Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: use ether_addr_equal_64bitsJulia Lawall
Ether_addr_equal_64bits is more efficient than ether_addr_equal, and can be used when each argument is an array within a structure that contains at least two bytes of data beyond the array. The structures involved are: ieee80211_hdr defined in include/linux/ieee80211.h ath_common defined in drivers/net/wireless/ath/ath.h This was done using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix interrupt statisticsSujith Manoharan
Initialize "sync_cause" to zero since commit "ath9k: move ath9k_debug_sync_cause out of ath9k_hw" fills it conditionally based on ISR status. Not doing this results in garbage values in debugfs. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Remove unused config option ack_6mbSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Fix AR9100 chip power-onSujith Manoharan
AR9100 requires a larger delay after waking up the RTC. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Cleanup __ath9k_hw_init()Sujith Manoharan
* Move initialization of config variables to ath9k_hw_init_config(). * Move initialization of defaults to ath9k_hw_init_defaults(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-03ath9k: Handle unsupported MAC versions earlySujith Manoharan
There is no point in trying to bring up the chip when the MAC version is not present in the supported list. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>