summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/xmit.c
AgeCommit message (Collapse)Author
2011-07-05ath9k: Fix tx throughput drops for AR9003 chips with AES encryptionRajkumar Manoharan
While sending aggregated frames in AES, the AR5416 chips required additional padding b/w subframes. This workaround is not needed for edma (AR9003 family) chips. With this patch ~4Mbps thoughput improvement was observed in clear environment. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-24Merge ↵John W. Linville
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-11ath9k: fix a regression in PS frame filter handlingFelix Fietkau
Only leave filtering enabled for AP or VLAN interfaces, clear the destination mask for all other interfaces. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05ath9k_hw: remove aggregation protection modeMohammed Shafi Shajakhan
when aggregation protection mode is enabled the hardware needs to send RTS/CTS for each HT frame. Currently its disabled so remove the unused call backs. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-04-25ath9k: cleanup hw pll work handlerSenthil Balasubramanian
There is no reason why pll work handler should be part of xmit file. move it to main.c so that reading hw check routines are all in the same place. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-19ath9k: assign keycache slots to unencrypted stationsFelix Fietkau
Frame filtering relies on having a valid destination index (keycache slot), to keep track of the destination. Assigning a keycache slot (configured to unencrypted, with no key data attached) improves powersave handling in AP mode with no encryption. The dummy keycache entry for a station is cleared, when a real key gets added. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-19ath9k: fix powersave frame filtering/buffering in AP modeFelix Fietkau
This patch fixes a long standing issue of pending packets in the queue being sent (and retransmitted many times) to sleeping stations. This was made worse by aggregation through driver-internal retransmitting of A-MDPU subframes. Previously the hardware tx filter was cleared unconditionally for every single packet - with this patch it uses the IEEE80211_TX_CTL_CLEAR_PS_FILT for unaggregated frames. A sta_notify driver op is added to stop aggregation for stations when they enter powersave mode. Subframes stay buffered inside the driver, to ensure that the BlockAck window keeps a sane state. Since the driver uses software aggregation, the clearing of the tx filter needs to be handled by the driver instead of mac80211 for aggregated frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c drivers/net/wireless/ath/ar9170/phy.c drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30ath9k_hw: remove pCap->tx_triglevel_maxFelix Fietkau
It has the same purpose (and value) as ah->config.max_txtrig_level Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: remove the pending frames ath_txq_schedule workaroundFelix Fietkau
This workaround called ath_txq_schedule whenever there were still pending frames for a queue, but the queue depth was zero. Because of its its high false positive probability (e.g. with paused TIDs) and because it is in the way of other pending work (AP powersave fixes), it is better to remove this code entirely. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-21ath9k: Fix kernel panic in AR2427Mohammed Shafi Shajakhan
Kernel panic occurs just after AR2427 establishes connection with AP. Unless aggregation is enabled we don't initialize the TID structure. Thus accesing the elements of the TID structure when aggregation is disabled, leads to NULL pointer dereferencing. [ 191.320358] Call Trace: [ 191.320364] [<fd250ea7>] ? ath9k_tx+0xa7/0x200 [ath9k] [ 191.320376] [<fd1ec7fc>] ? __ieee80211_tx+0x5c/0x1e0 [mac80211] [ 191.320386] [<fd1edd2b>] ? ieee80211_tx+0x7b/0x90 [mac80211] [ 191.320395] [<fd1edddd>] ? ieee80211_xmit+0x9d/0x1d0 [mac80211] [ 191.320401] [<c014218f>] ? wake_up_state+0xf/0x20 [ 191.320405] [<c015dbc8>] ? signal_wake_up+0x28/0x40 [ 191.320410] [<c012a578>] ? default_spin_lock_flags+0x8/0x10 [ 191.320420] [<fd1ee308>] ? ieee80211_subif_start_xmit+0x2e8/0x7c0 [mac80211] [ 191.320425] [<c058f905>] ? do_page_fault+0x295/0x3a0 [ 191.320431] [<c04c4a3d>] ? dev_hard_start_xmit+0x1ad/0x210 [ 191.320436] [<c04d96b5>] ? sch_direct_xmit+0x105/0x170 [ 191.320445] [<fd1f161a>] ? get_sta_flags+0x2a/0x40 [mac80211] [ 191.320449] [<c04c780f>] ? dev_queue_xmit+0x37f/0x4b0 [ 191.320452] [<c04d75b0>] ? eth_header+0x0/0xb0 [ 191.320456] [<c04cc479>] ? neigh_resolve_output+0xe9/0x310 [ 191.320461] [<c053d295>] ? ip6_output_finish+0xa5/0x110 [ 191.320464] [<c053e354>] ? ip6_output2+0x134/0x250 [ 191.320468] [<c053f7dd>] ? ip6_output+0x6d/0x100 [ 191.320471] [<c0559665>] ? mld_sendpack+0x395/0x3e0 [ 191.320475] [<c0557f81>] ? add_grhead+0x31/0xa0 [ 191.320478] [<c055a83c>] ? mld_send_cr+0x1bc/0x2b0 [ 191.320482] [<c01535d9>] ? irq_exit+0x39/0x70 [ 191.320485] [<c055a940>] ? mld_ifc_timer_expire+0x10/0x40 [ 191.320489] [<c015b92e>] ? run_timer_softirq+0x13e/0x2c0 [ 191.320493] [<c0103a30>] ? common_interrupt+0x30/0x40 [ 191.320498] [<c055a930>] ? mld_ifc_timer_expire+0x0/0x40 [ 191.320502] [<c0153358>] ? __do_softirq+0x98/0x1b0 [ 191.320506] [<c01534b5>] ? do_softirq+0x45/0x50 [ 191.320509] [<c0153605>] ? irq_exit+0x65/0x70 [ 191.320513] [<c05917dc>] ? smp_apic_timer_interrupt+0x5c/0x8b [ 191.320516] [<c0103df1>] ? apic_timer_interrupt+0x31/0x40 [ 191.320521] [<c016007b>] ? k_getrusage+0x12b/0x2f0 [ 191.320525] [<c039e384>] ? acpi_idle_enter_simple+0x117/0x148 [ 191.320529] [<c04a20da>] ? cpuidle_idle_call+0x7a/0x100 [ 191.320532] [<c01021d4>] ? cpu_idle+0x94/0xd0 [ 191.320536] [<c057ab88>] ? rest_init+0x58/0x60 [ 191.320541] [<c07a58ec>] ? start_kernel+0x351/0x357 [ 191.320544] [<c07a53c7>] ? unknown_bootoption+0x0/0x19e [ 191.320548] [<c07a50aa>] ? i386_start_kernel+0xaa/0xb1 [ 191.320550] Code: 03 66 3d 00 03 0f 84 7c 02 00 00 83 c3 18 0f b6 03 8b 4d e0 89 c3 83 e3 0f 6b c3 48 89 5d d8 8d 04 06 8d 50 0c 89 55 d0 8b 40 20 <8b> 00 3b 01 0f 85 8e 02 00 00 f6 47 20 40 0f 84 29 ff ff ff 8b [ 191.320634] EIP: [<fd2586d4>] ath_tx_start+0x474/0x770 [ath9k] SS:ESP 0068:c0761a90 [ 191.320642] CR2: 0000000000000000 [ 191.320647] ---[ end trace 9296ef23b9076ece ]--- [ 191.320650] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-14ath9k: fix aggregation related interoperability issuesFelix Fietkau
Some clients seems to keep track of their reorder window even after an aggregation session has been disabled. This causes issues if there are still retried but not completed frames pending for the TID. To ensure that rx does not stall in such situations, set sendbar to 1 for any frame purged from the TID queue on teardown. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-14ath9k: fix the .flush driver op implementationFelix Fietkau
This patch simplifies the flush op and reuses ath_drain_all_txq for flushing out pending frames if necessary. It also uses a global timeout of 200ms instead of the per-queue 60ms timeout. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-14ath9k: fix stopping tx dma on resetFelix Fietkau
In some situations, stopping Tx DMA frequently fails, leading to messages like this: ath: Failed to stop TX DMA in 100 msec after killing last frame ath: Failed to stop TX DMA! This patch uses a few MAC features to abort DMA globally instead of iterating over all hardware queues and attempting to stop them individually. Not only is that faster and works with a shorter timeout, it also makes the process much more reliable. With this change, I can no longer trigger these messages on AR9380, and on AR9280 they become much more rare. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21ath9k: Implement op_flush()Vasanthakumar Thiagarajan
When op_flush() is called with no drop (drop=false), the driver tries to tx as many frames as possible in about 100ms on every hw queue. During this time period frames from sw queue are also scheduled on to respective hw queue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-09ath9k: Remove redundant beacon_intervalSteve Brown
The variable appears in both ath_softc and ath_beacon_config. The struct ath_beacon_config is embedded in ath_softc. The redundant variable was added by commit id 57c4d7b4c4986037be51476b8e3025d5ba18d8b8. Signed-off-by: Steve Brown <sbrown@cortland.com> Reviewed-by: Mohammed Shafi <shafi.ath9k@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04ath9k: Fix possible double free of PAPRD skb'sMohammed Shafi Shajakhan
This patch reverts the following commit ath9k: remove bfs_paprd_timestamp from struct ath_buf_state Under high interference/noisy environment conditions where PAPRD frames fails heavily introduces a possibility of double freeing skb's and causes kernel panic after some time.This patch reverts back to the original approach of using paprd_timestamp before freeing the PAPRD frame skb's [ 194.193705] Pid: 0, comm: swapper Tainted: G D WC 2.6.35-22-generic #33-Ubuntu [ 194.193712] Call Trace: [ 194.193722] [<c05c6468>] ? printk+0x2d/0x35 [ 194.193732] [<c05c63c3>] panic+0x5a/0xd2 [ 194.193741] [<c05ca3ed>] oops_end+0xcd/0xd0 [ 194.193750] [<c0105f74>] die+0x54/0x80 [ 194.193758] [<c05c9a16>] do_trap+0x96/0xc0 [ 194.193837] [<c0103fb0>] ? do_invalid_op+0x0/0xa0 [ 194.193846] [<c010403b>] do_invalid_op+0x8b/0xa0 [ 194.193856] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193866] [<c012ce18>] ? default_spin_lock_flags+0x8/0x10 [ 194.193877] [<c01de47a>] ? free_one_page+0x12a/0x2d0 [ 194.193888] [<c01e04dc>] ? __free_pages+0x1c/0x40 [ 194.193897] [<c05c97a7>] error_code+0x73/0x78 [ 194.193906] [<c020bd4c>] ? kfree+0xec/0xf0 [ 194.193915] [<c04ecdd0>] ? skb_release_data+0x70/0xa0 [ 194.193924] [<c04ecdd0>] skb_release_data+0x70/0xa0 [ 194.193933] [<c04ec997>] __kfree_skb+0x17/0x90 [ 194.193941] [<c04eca31>] consume_skb+0x21/0x40 [ 194.193964] [<f85e0b70>] ieee80211_tx_status+0x760/0x860 [mac80211] [ 194.193979] [<f85caddf>] ath_tx_complete_buf+0x1bf/0x2c0 [ath9k] [ 194.193988] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.193997] [<c04ec40e>] ? skb_queue_tail+0x3e/0x50 [ 194.194010] [<f85cc803>] ath_tx_complete_aggr+0x823/0x940 [ath9k] [ 194.194021] [<c0108a28>] ? sched_clock+0x8/0x10 [ 194.194030] [<c016bf14>] ? sched_clock_local+0xa4/0x180 [ 194.194040] [<c0139f57>] ? enqueue_sleeper+0x1e7/0x2b0 [ 194.194051] [<c013a194>] ? enqueue_entity+0x174/0x200 [ 194.194064] [<f85ce83d>] ath_tx_edma_tasklet+0x2bd/0x3b0 [ath9k] [ 194.194074] [<c05c8b9f>] ? _raw_spin_lock_irqsave+0x2f/0x50 [ 194.194088] [<f85c7b9f>] ath9k_tasklet+0x9f/0x190 [ath9k] [ 194.194097] [<c01505d7>] tasklet_action+0xa7/0xb0 [ 194.194107] [<c015127c>] __do_softirq+0x9c/0x1b0 [ 194.194117] [<c01a7f64>] ? irq_to_desc+0x14/0x20 [ 194.194126] [<c0124fc4>] ? ack_apic_level+0x64/0x1f0 [ 194.194136] [<c01513d5>] do_softirq+0x45/0x50 [ 194.194145] [<c0151545>] irq_exit+0x65/0x70 [ 194.194153] [<c05cf665>] do_IRQ+0x55/0xc0 [ 194.194162] [<c016a6c7>] ? hrtimer_start+0x27/0x30 [ 194.194171] [<c0103630>] common_interrupt+0x30/0x38 [ 194.194181] [<c012c21a>] ? native_safe_halt+0xa/0x10 [ 194.194268] [<c010a2f9>] default_idle+0x49/0xb0 [ 194.194277] [<c0101fcc>] cpu_idle+0x8c/0xd0 [ 194.194286] [<c05b2431>] rest_init+0x71/0x80 [ 194.194295] [<c081981a>] start_kernel+0x36e/0x374 [ 194.194305] [<c08199dd>] ? pass_all_bootoptions+0x0/0xa [ 194.194314] [<c08190d7>] i386_start_kernel+0xd7/0xdf [ 194.194364] panic occurred, switching back to text console Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/init.c
2011-01-28ath9k: Fix a locking related issue.Vivek Natarajan
Spin_lock has been tried to be acquired twice from ath9k_tasklet to ath_reset which resulted in a machine freeze. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: Fix a PLL hang issue observed with AR9485.Vivek Natarajan
When this PLL hang issue is seen, both Rx and Tx fail to work. The sqsum_dvc needs to be below 2000 for a good chip. During this issue the sqsum_dvc value is beyond 80000 and only a full reset can solve this problem. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: fix tx queue index confusion in debugfs codeFelix Fietkau
Various places printing tx queue information used various different ways to get a tx queue index for printing statistics. Most of these ways were wrong. ATH_TXQ_AC_* cannot be used as an index for sc->tx.txq, because it is only used internally for queue assignment. One place used WME_AC_* as a queue index for sc->debug.stats.txstats, however this array uses the ath9k_hw queue number as well. Fix all of this by always using the ath9k_hw queue number as an index, and always looking it up by going through sc->tx.txq_map. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: fold struct ath_wiphy into struct ath_softcFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: remove the bf->aphy fieldFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: remove support for virtual wiphysFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: clean up the code that wakes the mac80211 queuesFelix Fietkau
Instead of spreading ath_wake_mac80211_queue() calls over multiple places in the tx path that process the tx queue for completion, call it only where the pending frames counter gets decremented, eliminating some redundant checks. To prevent queue draining from waking the queues prematurely (e.g. during a hardware reset), reset the queue stop state when draining all queues, as the caller in main.c will run ieee80211_wake_queues(hw) anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-27ath9k: fix misplaced debug codeFelix Fietkau
The commit 'ath9k: Add more information to debugfs xmit file.' added more debug counters to ath9k and also added some lines of code to ath9k_hw. Since ath9k_hw is also used by ath9k_htc, its code must not depend on ath9k data structures. In this case it was not fatal, but it's still wrong, so the code needs to be moved back to ath9k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-26ath9k: clean up enums and unused macrosMohammed Shafi Shajakhan
Remove unused macros and cleanup buffer_type enumeration Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Try more than one queue when scheduling new aggregate.Ben Greear
Try all xmit queues until the hardware buffers are full. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Restart xmit logic in xmit watchdog.Ben Greear
The system can get into a state where the xmit queue is stopped, but there are no packets pending, so the queue will not be restarted. Add logic to the xmit watchdog to attempt to restart the xmit logic if this situation is detected. Example 'dmesg' output: ath: txq: f4e723e0 axq_qnum: 2, mac80211_qnum: 2 axq_link: f4e996c8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Add counters to distinquish AMPDU enqueues.Ben Greear
Show counters for pkts sent directly to hardware and those queued in software. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Ensure xmit makes progress.Ben Greear
If the txq->axq_q is empty, the code was breaking out of the tx_processq logic without checking to see if it should transmit other queued AMPDU frames (txq->axq_acq). This patches ensures ath_txq_schedule is called. This needs review. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: Add more information to debugfs xmit file.Ben Greear
Should help debug strange tx lockup type issues. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21ath9k: add missing ps wakeup/restore callsFelix Fietkau
There are several places where ath_reset() was called without proper calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls directly to ath_reset and drop them from callers where it makes sense. Also add them to the config callback around ath_update_txpow to fix a crash that happens when the tx power changed before any vif is brought up. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: fix excessive BAR sending when a frame exceeds its retry limitFelix Fietkau
Because the sendbar variable was not reset to zero, the stack would send Block ACK requests for all subframes following the one that failed, which could mess up the receiver side block ack window. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: try more than one tid when scheduling a new aggregateFelix Fietkau
Sometimes the first TID in the first AC's list is not available for forming a new aggregate (the BAW might not allow it), however other TIDs may have data available for sending. Prevent a slowdown of other TIDs by going through multiple entries until we've either hit the last one or enough AMPDUs are pending in the hardware queue. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: reinitialize block ack window data when starting aggregationFelix Fietkau
There might be some old stale data left, which could confuse tracking of pending tx frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: fix initial sequence number after starting an ampdu sessionFelix Fietkau
txtid->seq_start may not always be up to date, when there is HT non-AMPDU traffic just before starting an AMPDU session. Relying on txtid->seq_next is better, since it is also used to generate the sequence numbers for all QoS data frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19ath9k: fix bogus sequence number increases on aggregation tid flushFelix Fietkau
When a tid pointer is passed to ath_tx_send_normal(), it increases the starting sequence number for the next AMPDU action frame, which should only be done if the sequence number assignment is fresh. In this case it is clearly not. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20ath9k: fix queue depth check for forming new aggregatesFelix Fietkau
To improve aggregation length, there should not be more than two fully formed A-MPDU frames in the hardware queue. To ensure this, the code checks the tx queue length before forming new A-MPDUs. This can reduce the throughput (or maybe even starve out A-MPDU traffic) when too many non-aggregated frames are in the queue. Fix this by keeping track of pending A-MPDU frames (even when they're sent out as single frames), but exclude rate control probing frames to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13ath9k: fix sequence number assigment for non-AMPDU QoS data framesFelix Fietkau
wireless-testing commit 04caf863750bc7e042d1e8d57e5ce9d6326ab435 ('ath9k: more tx setup cleanups') merged tx path code for HT vs non-HT frames, however it did not pass the tid pointer to ath_tx_send_normal, causing an inconsistency between AMPDU vs non-AMPDU sequence number handling. Fix this by always passing in the tid pointer for all QoS data frames. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
2010-12-08ath9k: Check for NULL sta in ath_tx_startBen Greear
It can be NULL according to docs, and logging showed it to be NULL in practice. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print to ath_dbgJoe Perches
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print(.., ATH_DBG_FATAL to ath_errJoe Perches
So these errors are always emitted at KERN_ERR level. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>