summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/wmi.h
AgeCommit message (Collapse)Author
2023-08-23wifi: ath10k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-1-8e2698759564@quicinc.com
2023-05-05wifi: ath10k: Use list_count_nodes()Christophe JAILLET
ath10k_wmi_fw_stats_num_peers() and ath10k_wmi_fw_stats_num_vdevs() really look the same as list_count_nodes(), so use the latter instead of hand writing it. The first ones use list_for_each_entry() and the other list_for_each(), but they both count the number of nodes in the list. Compile tested only. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/e6ec525c0c5057e97e33a63f8a4aa482e5c2da7f.1682541872.git.christophe.jaillet@wanadoo.fr
2022-09-16wifi: ath10k: Fix miscellaneous spelling errorsJeff Johnson
Fix misspellings flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220909145300.19223-1-quic_jjohnson@quicinc.com
2021-12-13ath10k: wmi: remove array of flexible structuresKalle Valo
I updated to sparse v0.6.4 and it warns: drivers/net/wireless/ath/ath10k/wmi.c: note: in included file (through drivers/net/wireless/ath/ath10k/core.h): drivers/net/wireless/ath/ath10k/wmi.h:3481:34: warning: array of flexible structures Fix it by changing the type to u8 array, in struct wmi_phyerr_hdr_arg it's stored as a void pointer anyway. Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209091545.6098-2-kvalo@kernel.org
2021-10-13ath10k: fix max antenna gain unitSven Eckelmann
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB steps). This isn't the case for max_antenna_gain - which is still expected by the firmware as dB. The firmware is converting it from dB to the internal (twicepower) representation when it calculates the limits of a channel. This can be seen in tpc_stats when configuring "12" as max_antenna_gain. Instead of the expected 12 (6 dB), the tpc_stats shows 24 (12 dB). Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org
2021-06-15ath10k: remove the repeated declarationShaokun Zhang
Functions 'ath10k_pci_free_pipes' and 'ath10k_wmi_alloc_skb' are declared twice in their header file, so remove the repeated declaration. Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1622448459-50805-1-git-send-email-zhangshaokun@hisilicon.com
2021-05-24ath10k/ath11k: fix spelling mistake "requed" -> "requeued"Colin Ian King
There are multiple occurrances of the misspelling of requeued in the drivers with symbol names and debug text. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210423134133.339751-1-colin.king@canonical.com
2020-12-02ath10k: Fix the parsing error in service available eventRakesh Pillai
The wmi service available event has been extended to contain extra 128 bit for new services to be indicated by firmware. Currently the presence of any optional TLVs in the wmi service available event leads to a parsing error with the below error message: ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71 The wmi service available event parsing should not return error for the newly added optional TLV. Fix this parsing for service available event message. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00720-QCAHLSWMTPL-1 Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org
2020-11-23ath10k: add target IRAM recovery feature supportVenkateswara Naralasetty
This target IRAM recovery feature support is to copy target IRAM contents available at ATH10K_MEM_REGION_TYPE_REG to host memory for back up after firmware loaded. Target IRAM contents are copied to wmi memory chunks allocated for the WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID and provide the wmi chunks address to the firmware through wmi init command. If firmware detects andy IRAM corruption through periodic checksum validation, It will download the IRAM contents back from the provided wmi memory chunks address using hif_memcpy. This IRAM recovery feature prevent target assert in case of unexpected target IRAM corruptions. This patch also introduce a new feature flag 'iram-recovery' for backward compatibility. Tested-on: QCA9888 10.4-3.9.0.2-00094 Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604657442-23674-1-git-send-email-vnaralas@codeaurora.org
2020-10-28ath10k: remove repeated words in commentsKalle Valo
Found by latest checkpatch. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603802288-21158-1-git-send-email-kvalo@codeaurora.org
2020-08-26ath10k: Add new api to support TID specific configurationTamizh Chelvam
This patch add ops for set_tid_config to support TID specific configuration. Station specific TID configuration will have more priority than vif specific TID configuration. WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT service flag introduced to notify host for TID config support. And RTS_CTS extended tid configuration support advertised through the service flag WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT. TID specific noack configuration requires aggregation should be disabled and rate for the data TID packets should be basic rates. So, if the TID already configured with noack policy then driver will ignore the aggregation or TX rate related configuration for the same data TID. In TX rate configuration should be applied with highest preamble configuration(HT rates should not be applied for the station which supports vht rates). Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021 Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593875614-5683-4-git-send-email-tamizhr@codeaurora.org
2020-08-26ath10k: Add wmi command support for station specific TID configTamizh Chelvam
This patch adds WMI interface to configure station specific TID configuration . Host needs to send station's MAC address along with TID number and its configuration to target through WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID. WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise this support. Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021 Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1593875614-5683-2-git-send-email-tamizhr@codeaurora.org
2020-05-11ath10k: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200507041127.GA31587@embeddedor
2020-04-28ath10k: add rx bitrate report for SDIOWen Gong
For SDIO chip, its rx indication is struct htt_rx_indication_hl, which does not include the bitrate info as well as PCIe, for PCIe, it use function ath10k_htt_rx_h_rates to parse the bitrate info in struct rx_ppdu_start and then report it to mac80211 via ieee80211_rx_status. SDIO does not have the same info as PCIe, then iw command can not get the rx bitrate by "iw wlan0 station dump". for example, it always show 6.0 MBit/s localhost ~ # iw wlan0 link Connected to 3c:28:6d:96:fd:69 (on wlan0) SSID: kukui_test freq: 5180 RX: 111800 bytes (595 packets) TX: 35419 bytes (202 packets) signal: -41 dBm rx bitrate: 6.0 MBit/s This patch is to send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware for ath10k_sta_statistics and save the rx bitrate for WMI event WMI_TLV_PEER_STATS_INFO_EVENTID. This patch only effect SDIO chip, ath10k_mac_sta_get_peer_stats_info has check for bitrate_statistics of hw_params, this patch only enable it for "qca6174 hw3.2 sdio". Tested with QCA6174 SDIO firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200427080416.8265-3-wgong@codeaurora.org
2020-04-28ath10k: enable firmware peer stats info for wmi tlvWen Gong
For wmi tlv type, firmware disable peer stats info by default, after enable it, firmware will report WMI_TLV_PEER_STATS_INFO_EVENTID if ath10k send WMI_TLV_REQUEST_PEER_STATS_INFO_CMDID to firmware. Enable it will only set a flag in firmware, firmware will not report it without receive request WMI command. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200427080416.8265-2-wgong@codeaurora.org
2020-04-06ath10k: enable radar detection in secondary segmentLei Wang
Enable radar detection in secondary segment for VHT160 and VHT80+80 mode on DFS channels. Otherwise, when injecting radar pulse in the secondary segment, the DUT can't detect radar pulse. Tested: qca9984 with firmware ver 10.4-3.10-00047 Signed-off-by: Lei Wang <leiwa@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585574792-719-2-git-send-email-ssreeela@codeaurora.org
2020-04-06ath10k: enable VHT160 and VHT80+80 modesLei Wang
Set right channel frequencies in VHT160 mode according to the VHT160 interoperability workaround added as part of IEEE Std 802.11™-2016 in "Table 9-252—VHT Operation Information subfields", band_center_freq2 corresponds to CCFS1 in Table 9-253. Previous implementation (band_center_freq2 = 0 for VHT160) is only deprecated. Enable VHT80+80 mode and set the proper peer RX nss value for VHT160 and VHT80+80 mode. Based on patches by Sebastian Gottschall: https://lkml.kernel.org/r/20180704095444.662-1-s.gottschall@dd-wrt.com https://lkml.kernel.org/r/20180704120519.6479-1-s.gottschall@dd-wrt.com Tested: qca9984 with firmware ver 10.4-3.10-00047 Co-developed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Co-developed-by: Rick Wu <rwu@codeaurora.org> Signed-off-by: Rick Wu <rwu@codeaurora.org> Signed-off-by: Lei Wang <leiwa@codeaurora.org> Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585574792-719-1-git-send-email-ssreeela@codeaurora.org
2020-03-11ath10k: fix unsupported chip reset debugs file writeYingying Tang
Before this change, after writing "warm_hw_reset" debugfs file, host will send chip reset command to FW even though FW do not support this service getting a warning print. Though there is no FW impact before this change, this patch restricts chip reset command sent to FW only if FW advertises the support via WMI service bit. Removed the redundant check and ath10k_warn() print as well. New version FW will report chip reset service bit to host. Host allow user to trigger WLAN chip reset only when fw report this service bit. For older NON-TLV FW, since it do not report chip reset service bit, host will not send chip reset command. For older TLV FW, since it report chip reset service bit, host will send chip reset command. Tested HW: QCA9984, WCN3990 QCA9984 FW version: WLAN.BL.3.9.0.2-00042-S-1 Signed-off-by: Yingying Tang <yintang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-25ath10k: report rssi of each chain to mac80211 for sdioWen Gong
iw command only show rssi without each chain's rssi on sdio iw wlan0 station dump Station a0:40:a0:93:3e:de (on wlan0) signal: -82 dBm signal avg: -82 dBm after this patch, it will show each chain's rssi on sdio Station a0:40:a0:93:3e:de (on wlan0) signal: -82 [-84, -88] dBm signal avg: -82 [-84, -87] dBm For QCA6174 PCIe, the ppdu have the correct rssi of each chain, it indicate rssi of rx data by ath10k_htt_rx_h_signal. For sdio chip, the rssi of each chain stored in rx management reported by firmware, the ath10k_wmi_tlv_op_pull_mgmt_rx_ev which used for tlv wmi will get the rssi of each chain and stored them in wmi_mgmt_rx_ev_arg, then indicate them to mac80211. For non-tlv wmi chip, it will not get the rssi of each chain and not indicate to mac80211, for non-tlv wmi chip, this patch will not have impact. For tlv wmi chip, if the rssi of chain in mgmt is valid, it will be indicate to mac80211, tested with QCA6174 PCIe/SDIO, the rssi of 2 chain in mgmt is valid. rssi of chains in mgmt of QCA6174 SDIO: 92096.652780: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[0]:70 92096.657324: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[1]:68 92096.662009: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[2]:128 92096.666647: ath10k:ath10k_log_warn: ath10k_sdio mmc1:0001:1 rssi[3]:128 rssi of chains in mgmt of QCA6174 PCIe: [ 1581.049816] ath10k_pci 0000:02:00.0: mgmt rssi[0]:17 [ 1581.049818] ath10k_pci 0000:02:00.0: mgmt rssi[1]:22 [ 1581.049821] ath10k_pci 0000:02:00.0: mgmt rssi[2]:128 [ 1581.049823] ath10k_pci 0000:02:00.0: mgmt rssi[3]:128 after apply this patch, the iw's rssi of PCIe do not changed, result is same with before. iw wlan0 station dump of QCA6174 PCIe: Station 6c:e8:73:b8:92:dc (on wlan0) signal: -70 [-77, -72] dBm signal avg: -69 [-78, -72] dBm iw wlan-5000mhz station dump of QCA9984 PCIe connected with 2 client which has 2 chain: Station 70:48:0f:1f:1a:b2 (on wlan-5000mhz) signal: -47 [-55, -48, -87, -88] dBm signal avg: -42 [-50, -43, -83, -86] dBm Station ac:c1:ee:39:e3:83 (on wlan-5000mhz) signal: -43 [-46, -45, -79, -84] dBm signal avg: -43 [-46, -46, -82, -83] dBm Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1. Tested with QCA9984 PCIe with firmware 10.4-3.9.0.2-00040. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02ath10k: add support for hardware rfkillWen Gong
When hardware rfkill is enabled in the firmware it will report the capability via using WMI_TLV_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY event to the host. ath10k will check the capability, and if it is enabled then ath10k will set the GPIO information to firmware using WMI_PDEV_SET_PARAM. When the firmware detects hardware rfkill is enabled by the user, it will report it via WMI_RFKILL_STATE_CHANGE_EVENTID. Once ath10k receives the event it will send wmi command WMI_PDEV_SET_PARAM to the firmware to enable/disable the radio and also notifies cfg80211. We can't power off the device when rfkill is enabled, as otherwise the firmware would not be able to detect GPIO changes and report them to the host. So when rfkill is enabled, we need to keep the firmware running. Tested with QCA6174 PCI with firmware WLAN.RM.4.4.1-00109-QCARMSWPZ-1. Signed-off-by: Alan Liu <alanliu@codeaurora.org> Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-01ath10k: print supported MCS rates within service ready eventTomislav Požega
Add vht_supp_mcs argument to service ready structure and print supported MCS rates in WMI service ready debug message. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-01ath10k: add 2ghz channel arguments to service ready structureTomislav Požega
Add lowest/highest 2ghz channel arguments for use within WMI service ready structure. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: Add support to provide higher range mem chunks in wmi init commandSurabhi Vishnoi
With the current implementation of wmi init command, there is no provision for the host driver to provide mem chunks addresses with more than 32-bit, to the firmware. WCN3990 is a 35-bit target and can accept mem chunks addresses which are above 32-bit. If firmware supports address range more than 32 bit, it advertises the support by setting the WMI_SERVICE_EXTEND_ADDRESS service. Based on this service fill the upper bits of paddr while providing the mem chunks in the wmi init command. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-23ath10k: Add peer param map for tlv and non-tlvRakesh Pillai
The peer param id for PEER_PARAM_USE_FIXED_PWR is different for tlv and non-tlv firmware. This causes incorrect peer param to be set by the driver to the firmware(tlv/non-tlv). Create seperate peer param map for tlv and non-tlv firmware and attach the peer param id based on the firmware type during the init. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-12ath10k: fix channel info parsing for non tlv targetRakesh Pillai
The tlv targets such as WCN3990 send more data in the chan info event, which is not sent by the non tlv targets. There is a minimum size check in the wmi event for non-tlv targets and hence we cannot update the common channel info structure as it was done in commit 13104929d2ec ("ath10k: fill the channel survey results for WCN3990 correctly"). This broke channel survey results on 10.x firmware versions. If the common channel info structure is updated, the size check for chan info event for non-tlv targets will fail and return -EPROTO and we see the below error messages ath10k_pci 0000:01:00.0: failed to parse chan info event: -71 Add tlv specific channel info structure and restore the original size of the common channel info structure to mitigate this issue. Tested HW: WCN3990 QCA9887 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 10.2.4-1.0-00037 Fixes: 13104929d2ec ("ath10k: fill the channel survey results for WCN3990 correctly") Cc: stable@vger.kernel.org # 5.0 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: add support for controlling tx power to a stationAshok Raj Nagarajan
This patch will add the support to control the transmit power for traffic to a station associated with the AP. Underlying firmware will enforce that the maximum tx power will be based on the regulatory requirements. If the user given transmit power is greater than the allowed tx power in the given channel, then the firmware will use the maximum tx power in the same channel. Max and Min tx power values will depends on no of tx chain masks, for QCA9984 allowed tx power range values from 6 to 23. When 0 is sent to the firmware as tx power, it will revert to the default tx power for the station. Tested Hardware : QCA9984 Tested Firmware : 10.4-3.9.0.2-00046 Co-developed-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Ashok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: Add peer delete response eventDundi Raviteja
Peer creation in firmware fails if last peer deletion is still in progress. The firmware sends a peer delete response event if it advertises the service WMI_SERVICE_SYNC_DELETE_CMDS. This peer delete response event is used to synchronize the peer deletion. Add peer delete response event and wait for the event after deleting every peer from host driver to synchronize with firmware. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Dundi Raviteja <dundi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: wait for vdev delete response from firmwareRakesh Pillai
When we add an interface immediately after removing the interface the vdev deletion in firmware might not have been completed. We need to synchronize the vdev creation with the firmware. Wait for vdev delete response from firmware when we remove an interface. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25ath10k: fix failure to set multiple fixed rateMiaoqing Pan
Currently, below fixed rate commands are broken, iw wlanx set bitrates legacy-<2.4|5> ht-mcs-<2.4|5> vht-mcs-<2.4|5> \ <NSS:MCSx> iw wlanx set bitrates legacy-<2.4|5> <legacy rate> ht-mcs-<2.4|5> \ vht-mcs-<2.4|5> <NSS:MCSx> There are two methods to set fixed rate, both failed, - Use vdev fixed rate command This command only support one single rate, but it's broken due to mac80211 change commit e8e4f5280ddd ("mac80211: reject/clear user rate mask if not usable"), which requires user to specify at least one legacy rate. So we can't use this command to set ht/vht single rate any more. - Use peer_assoc command This command can update rx capability for multiple rates, it will work fine for ht mcs rates, as each supported mcs can be advertised in ht_mcs index mask. But this will not work with vht rates because, as per the vht mcs capability advertisement, there are only two bits to indicate the supported mcs. E.g. only support 0-7, 0-8, 0-9. So introduced new WMI command: WMI_PEER_PARAM_FIXED_RATE. After peer assoc, the peer fixed rate cmd will work for that specific peer. Remaining peers will use auto rate. If both vdev fixed rate and peer fixed rates are given, peer fixed rate will take effect to peers for which this cmd is given. Remaining peers in that vdev, will use vdev fixed rate. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-07ath10k: Fix the wrong value of enums for wmi tlv stats idSurabhi Vishnoi
The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats are not received from firmware in wmi_update_stats event. Fix the enum values for above stats to receive all stats from firmware in WMI_TLV_UPDATE_STATS_EVENTID. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: f40a307eb92c ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990) Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fill rx duration for each peer in fw_stats for WCN3990Surabhi Vishnoi
Currently, rx_duration for each peer is not getting populated in fw_stats debugfs entry for WCN3990. WCN3990 firmware sends rx duration for each peer as part of peer_extd_stats in WMI_UPDATE_STATS_EVENT. To enable peer_extd_stats, firmware expects host to send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD. Send fw_stats_req_mask with flag WMI_TLV_PEER_STATS_EXTD set in WMI_REQUEST_STATS_CMD and parse the peer_extd_stats in WMI_UPDATE_STATS_EVENT to populate the rx_duration of each peer in fw_stats debugfs entry. Currently the driver handles 32-bit rx_duration, but the rx_duration for WCN3990 can be upto 63 bit. The firmware sends rx_duration split into two 32-bit fields, with the upper 32-bits being valid only if its MSB is set. This change handles the 63-bit rx_duration obtained from WCN3990 and maintain the backward compatibility. To get the rx_duration of each connected peer : cat /sys/kernel/debug/ieee80211/phyX/ath10k/fw_stats Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of SGI in tx_stats debugfsSurabhi Vishnoi
The SGI is updated wrongly in tx stats table in debugfs per sta entry. To know whether the packets/bytes are sent with SHORT GI, test whether the SGI bit(ATH10K_RATE_INFO_FLAGS_SGI_BIT) is set or not in the txrate flags. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-28ath10k: Fix the wrong updation of BW in tx_stats debugfs entrySurabhi Vishnoi
Currently, the bandwidth is updated wrongly in BW table in tx_stats debugfs per sta as there is difference in number of bandwidth type in mac80211 and driver stats table. This leads to bandwidth getting updated at wrong index in bandwidth table in tx_stats. Fix this index mismatch between mac80211 and driver stats table (BW table) by making the number of bandwidth type in driver compatible with mac80211. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support") Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-26ath10k: add support for ack rssi value of management tx packetsAbhishek Ambure
In WCN3990, WMI_TLV_SERVICE_TX_DATA_MGMT_ACK_RSSI service Indicates that the firmware has the capability to send the RSSI value of the ACK for all data and management packets transmitted. If WMI_RSRC_CFG_FLAG_TX_ACK_RSSI is set in host capability then firmware sends RSSI value in "management" tx completion event. Host extracts ack rssi values of management packets from their tx completion event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-20ath10k: switch to use SPDX license identifiersKalle Valo
Use SPDX identifiers everywhere in ath10k. Makefile was incorrectly marked in commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"), fix that as well. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: change wmi.h to include only ieee80211.hKalle Valo
wmi.h does not use anything from mac80211.h so change it to include only ieee80211.h. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: make wmi_service_name() warn about missing service idsKalle Valo
When adding a new value to enum wmi_service it's very easy to miss that the new value should be also added to wmi_service_name() mapping function. Modify the function so that GCC can now warn about this: drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_FOO' not handled in switch [-Wswitch] And also add a reminder to the enum. Thanks to Jouni Malinen for the idea. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: add missing values to wmi_service_name()Kalle Valo
After implementing the next patch GCC reported: drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_BTCOEX' not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_MGMT_TX_WMI' not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_SPOOF_MAC_SUPPORT' not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT' not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT' not handled in switch [-Wswitch] drivers/net/wireless/ath/ath10k/wmi.h:385:2: warning: enumeration value 'WMI_SERVICE_THERM_THROT' not handled in switch [-Wswitch] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: report tx airtime provided by fwManikanta Pubbisetty
If supported, update transmit airtime in mac80211 with the airtime values reported by the firmware. TX airtime of the PPDU is reported via HTT data TX completion indication message. A new service flag 'WMI_SERVICE_REPORT_AIRTIME' is added to advertise the firmware support. For firmwares which do not support this feature, TX airtime is calculated in the driver using TX bitrate. Hardwares tested : QCA9984 Firmwares tested : 10.4-3.6.1-00841 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: add dynamic vlan supportManikanta Pubbisetty
Multicast/broadcast traffic destined for a particular vlan group will always be encrypted in software. To enable dynamic VLANs, it requires driver support for sending software encrypted packets. In ath10k, sending software encrypted frames is allowed only when we insmod the driver with cryptmode param set to 1, this configuration disables hardware crypto and enables RAW mode implicitly. Since, enabling raw mode has performance impact, this cannot be considered as an ideal solution for supporting VLANs in the driver. As an alternative take, in this approach, cryptographic keys for unicast traffic (per peer PTKs) and keys for non-vlan group traffic will be configured in hardware, allowing hardware encryption for unicast and non-vlan group traffic. Only vlan group traffic will be encrypted in software and pushed to the target with encap mode set to RAW in the TX descriptors. Not all firmwares can support this type of key configuration(having few keys installed in hardware and few only in software); for this purpose a new WMI service flag "WMI_SERVICE_PER_PACKET_SW_ENCRYPT" is introduced to advertise this support. Also, adding the logic required to send sw encrypted frames in raw mode. Hardwares Tested : QCA9984, QCA988X Firmwares Tested : 10.4-3.5.3-00057, 10.2.4-1.0-00042 Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-12ath10k: add support to configure ftm responder rolePradeep Kumar Chitrapu
Configure fine timing measurement (FTM) responder role from the ftm_responder bss param sent by mac80211. With FTM functionality offloaded to firmware, adding the interface allows userspace to enable or disable FTM responder functionality. ath10k disables it at the time of interface creation. Supported FW: 10.4 Tested on IPQ4019 with firmware: 10.4-3.2.1.1-00022 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: implement set_base_macaddr to fix rx-bssid mask in multiple APs confChristian Lamparter
Many integrated QCA9984 WiFis in various IPQ806x platform routers from various vendors (Netgear R7800, ZyXEL NBG6817, TP-LINK C2600, etc.) have either blank, bogus or non-unique MAC-addresses in their calibration data. As a result, OpenWrt utilizes a discouraged binary calibration data patching method that allows to modify the device's MAC-addresses right at the source. This is because the ath10k' firmware extracts the MAC address from the supplied radio/calibration data and issues a response to the ath10k linux driver. Which was designed to take the main MAC in ath10k_wmi_event_ready(). Part of the "setting an alternate MAC" issue was already tackled by a patch from Brian Norris: commit 9d5804662ce1 ("ath10k: retrieve MAC address from system firmware if provided") by allowing the option to specify an alternate MAC-address with the established device_get_mac_address() function which extracts the right address from DeviceTree/fwnode mac-address or local-mac-address properties and saves it for later. However, Ben Greear noted that the Qualcomm's ath10k firmware is liable to not properly calculate its rx-bssid mask in this case. This can cause issues in the popluar "multiple AP with a single ath10k instance" configurations. To improve MAC address handling, Felix Fietkau suggested to call pdev_set_base_macaddr_cmdid before bringing up the first vif and use the first vif MAC address there. Which is in ath10k_core_start(). This patch implement Felix Fietkau's request to "call pdev_set_base_macaddr_cmdid before bringing up the first vif". The pdev_set_base_macaddr_cmdid is already declared for all devices and version. The driver just needed the support code for this function. Tested on: QCA9880/CUS223, firmwares: 10.2.4.13-2, 10.2.4.70.44, 10.2.4-1.0-00041 QCA9887/MR33 firmware:10.2.4-1.0-00033 QCA4019/RT-AC58U firmware: 10.4-3.4-00104, 10.4-3.5.3-00057 QCA9984/R7800 firmware: Candela Technologies (CT) Firmware BugLink: https://lists.openwrt.org/pipermail/openwrt-devel/2018-November/014595.html Fixes: 9d5804662ce1 ("ath10k: retrieve MAC address from system firmware if provided") Cc: Brian Norris <briannorris@chromium.org> Cc: Ben Greear <greearb@candelatech.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11ath10k: update GCMP & GCMP-256 cipher suite number for WCN3990Abhishek Ambure
TLV based firmware ex. QCA6174, WCN3990 expects key cipher value set to 9 while non-TLV firmware expects key cipher value set to 8 for enabling GCMP and GCMP-256 cipher suites. To fix this problem, attach the key cipher suite values based on wmi version. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Abhishek Ambure <aambure@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-08Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.1. Major changes: ath10k * change QMI interface to support the new (and backwards incompatible) interface from HL3.1 and used in recent HL2.0 branch firmware releases ath * add new country codes for US
2019-02-07ath10k: add a condition to fill the LDPC capability correctlySurabhi Vishnoi
The firmware advertises the LDPC support information for HT in HT capability info in the wmi service ready event. To provide granularity, firmware now advertises WMI_HT_CAP_RX_LDPC and WMI_HT_CAP_TX_LDPC separately. To support LDPC, host should also check for WMI_HT_CAP_RX_LDPC and WMI_HT_CAP_TX_LDPC in HT capabilities. Add a condition to existing logic in host to know whether firmware supports LDPC or not. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1, WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-07ath10k: Handle bundled tx completion for management framesRakesh Pillai
WCN3990 supports sending tx completion for multiple management frames bundled together in a single event. Add support to handle the bundled tx completion event for WCN3990. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01wireless: remove unneeded semicolonYueHaibing
remove unneeded semicolon Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Steve deRosier <derosier@cal-sierra.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-20Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 Last set of patches for 4.21. mt76 is still in very active development and having some refactoring as well as new features. But also other drivers got few new features and fixes. Major changes: ath10k * add amsdu support for QCA6174 monitor mode * report tx rate using the new ieee80211_tx_rate_update() API * wcn3990 support is not experimental anymore iwlwifi * support for FW version 43 for 9000 and 22000 series brcmfmac * add support for CYW43012 SDIO chipset * add the raw 4354 PCIe device ID for unprogrammed Cypress boards mwifiex * add NL80211_STA_INFO_RX_BITRATE support mt76 * use the same firmware for mt76x2e and mt76x2u * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20ath10k: add support to configure BB timing over wmiBhagavathi Perumal S
Add wmi configuration cmd to configure base band(BB) power amplifier(PA) off timing values in hardware. The default PA off timings were fine tuned to make proper DFS radar detection in QCA reference design. If ODM uses different PA in their design, then the same default PA off timing values cannot be used, it requires different settling time to detect radar pulses very sooner and avoid radar detection problems. In that case it provides provision to select proper PA off timing values based on the PA hardware used. The PA component is part of FEM hardware and new device tree entry "ext-fem-name" is used to indentify the FEM hardware. And this wmi configuration cmd is enabled via wmi service flag "WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT". Other way is to apply these values through calibration data, but recalibration of all boards out there might not be feasible. This change tested on firmware ver 10.2.4-1.0-00042 in QCA988X chipset. Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>